Helping you make the right choice

Everything you need to know about our everyday paper range

The Paper Facts

The Paper Facts

3

Contents

Fuji Xerox Sustainable Paper Sourcing Standards 4

The Life Cycle of Paper 5

The Paper Chain of Custody 6

Understanding Our Paper Certifications 7

Paper Range 8

Product Positioning 10

Together We Can Make a World of Difference 11

4

Fuji Xerox seeks to demonstrate and promote compliance with government recognised global social and environmental standards,and to identify and control the sources of the raw materials used in the manufacture of our paper products.

Fuji Xerox SustainablePaper Sourcing Standards

We believe it is in the interests of our industry to demonstrate responsible stewardship through the full product life cycle in order to verify paper as a socially and environmentally responsible communication medium. The Fuji Xerox Australia sustainable paper sourcing standards is one tool to achieve this objective.

We have established a set of minimum requirements for our paper suppliers across key environmental, social

and governance criteria, as well as a path for continuous improvement in line with best practice. We assess compliance with these standards annually and we work with non-government organisations to identify and escalate key issues of stakeholder concern. If areas of non-compliance are found our approach is to work with progressive suppliers to ensure standards are met. However if adequate progress is not made in a specified timeframe the supplier relationship will cease.

Assessment of Compliance

• ISO Management Standards

• Fibre Sourcing

• Carbon

• Other Emissions to Air

• Bleaching

• Water Use

• Emissions to Water

• Waste to Landfill

• Social Issues Management

• Transparency

5

Paper is part of everyday life, with physical properties and conveniences that satisfy a communication need not always filled by digital media. In fact, the use of office paper has increased rather than decreased over the last several decades as a result of the ‘information revolution’.

The paper life cycleThe life cycle a single piece of paper follows is extraordinary, from extraction of materials to the cleaning, rolling and heating process, to the final finished paper product being transported to your company. Speak with your Fuji Xerox Sales Representative for further information on any of the below processes.

Managing paper life cycle impacts

The Life Cycle of Paper

Papermaking is a highly industrialised process and haspotential environmental impacts to our world’s forests, air,water, and soils. It is therefore important to understand and mitigate the environmental impacts of paper use acrossits life cycle – from raw material acquisition, manufacturedistribution, use and disposal.

Our goal at Fuji Xerox is to work with paper manufacturers in supporting the development of asustainable paper cycle. This means ensuring that our paper is derived from paper mills with sustainablymanaged fibre sources and manufacturing processeswith reduced environmental impacts.

6

OFFICE SUPPLI

FOREST PULP PAPER RESELLER

END USER

PRINTER/ BROKER / RETAILER

✓ ✓ ✓

✓

✓ ✓

The paper supply chainChain of Custody follows the legal and physical ownership of wood and paper products through the supply chain and ensures that at every stage, agreed systems and processes are in place to guarantee the integrity of the certified products. That means that any organisation that takes legal ownership of a product and wants to pass-on the right to make a claim about the product needs to hold a Chain of Custody certificate. Put another way, anyone who buys product from a supplier that does not have a Chain of Custody cannot make a claim about the product or label the product. This applies to every type of organisation in the supply chain: manufacturers, wholesalers, merchants and printers. Merchants handling certified paper need to be certified to verify that the certified material can be tracked through their inventory and stock systems. Similarly, printers need to be certified.

The Paper Chain of Custody

Chain of Custody is the path taken by the raw materials harvested from a certified forest all the way through processing, production, distribution and printing until it is a final product to be sold to an end customer.

The Chain of Custody (CoC) scheme for forests is a process of verifying that the origin of the certified wood and timber products is indeed from forests for which there is some form of forest management certification.

In order to provide the verification, careful tracking of the wood and timber products is required through all the links of the supply chain from the forest to the markets in which the timber or other wood based product carries the claim.

Chain of Custody is the path taken by the raw materials harvested froma certified forest all the way through processing, production, distribution andprinting until it is a final product to be sold to an end customer.

The Paper Chain of Custody

The paper supply chainChain of Custody follows the legal and physical ownershipof wood and paper products through the supply chain and ensures that at every stage, agreed systems and processesare in place to guarantee the integrity of the certifiedproducts. That means that any organisation that takeslegal ownership of a product and wants to pass-on theright to make a claim about the product needs to hold aChain of Custody certificate. Put another way, anyone whobuys product from a supplier that does not have a Chain ofCustody cannot make a claim about the product or labelthe product. This applies to every type of organisation inthe supply chain: manufacturers, wholesalers, merchantsand printers. Merchants handling certified paper need to becertified to verify that the certified material can be trackedthrough their inventory and stock systems. Similarly, printersneed to be certified.

The Chain of Custody (CoC) scheme for forestsis a process of verifying that the origin of thecertified wood and timber products is indeedfrom forests for which there is some form of forestmanagement certification.

In order to provide the verification, careful trackingof the wood and timber products is required throughall the links of the supply chain from the forest to themarkets in which the timber or other wood basedproduct carries the claim.

7

OFFICE SUPPLI

FOREST PULP PAPER RESELLER

END USER

PRINTER/ BROKER / RETAILER

✓ ✓ ✓

✓

✓ ✓

The paper supply chainChain of Custody follows the legal and physical ownership of wood and paper products through the supply chain and ensures that at every stage, agreed systems and processes are in place to guarantee the integrity of the certified products. That means that any organisation that takes legal ownership of a product and wants to pass-on the right to make a claim about the product needs to hold a Chain of Custody certificate. Put another way, anyone who buys product from a supplier that does not have a Chain of Custody cannot make a claim about the product or label the product. This applies to every type of organisation in the supply chain: manufacturers, wholesalers, merchants and printers. Merchants handling certified paper need to be certified to verify that the certified material can be tracked through their inventory and stock systems. Similarly, printers need to be certified.

The Paper Chain of Custody

Chain of Custody is the path taken by the raw materials harvested from a certified forest all the way through processing, production, distribution and printing until it is a final product to be sold to an end customer.

The Chain of Custody (CoC) scheme for forests is a process of verifying that the origin of the certified wood and timber products is indeed from forests for which there is some form of forest management certification.

In order to provide the verification, careful tracking of the wood and timber products is required through all the links of the supply chain from the forest to the markets in which the timber or other wood based product carries the claim.

Understanding Our Paper Certifications

Carbon NeutralCarbon Neutral refers to a voluntary mechanism that seeks to achieve zero net greenhouse gas emissions from all activities. Carbon neutrality is normally achieved through a combination of reduction strategies e.g. energy efficiency and purchasing verified carbon offsets for all remaining unavoidable emissions so that zero net emissions can be accomplished.

FSC® (Forest Stewardship Council)FSC certification is internationally recognised as a rigorous environmental and social standard for responsible forest management. FSC certification is carried out by FSC accredited certification bodies (auditors). These are internationally accredited and managed by an independent accreditation body. FSC itself does not certify forest operations or manufacturers. This maintains FSC’s independence between its standards and requirements, and operations seeking certification.

NCOS (National Carbon Offset Standard)The Australian Government introduced the NCOS as a means of ensuring the environmental integrity of the carbon offsets and carbon neutral products available in the Australian market to build consumer confidence in the voluntary carbon market.

PEFC™ (Programme for the Endorsement of Forest Certification)PEFC is an international, non-profit, non-governmental umbrella organisation for the assessment of and mutual recognition of national forest certification schemes developed in a multistakeholder process. These national schemes build upon the inter-governmental processes for the promotion of sustainable forest management, a series of on-going mechanisms supported by 149 governments in the world.

EU EcolabelThe EU Ecolabel helps you identify products and services that have a reduced environmental impact throughout their life cycle, from the extraction of raw material through to production, use and disposal.

Blue AngelThe Blue Angel (Der Blaue Engel) is a German certification for products and services that have environmentally friendly aspects. With its rigorous rules regarding raw materials and the use of chemicals as well as consideration of health and quality standards, the Blue Angel is a reliable guidepost for environmentally friendly paper.

Quality Runnability GuaranteeFor consistent quality and performance, all Fuji Xerox papers are tested and qualified by Fuji Xerox laboratories.

8

Paper Range

Laserprint

Laserprint is ideal for everyday double-sided printing, and is an environmentally assured paper at a competitive price.

Product SpecificationsMoisture Content 4.5%Opacity 94%CIE Whiteness 155GSM 80Thickness 106

Product ListingSize Reams Per Carton Part NumberA4 (Long Grain) 5 103R00054A3 (Short Grain) 3 103R00055

Environmental Accreditation• FSC® Certified• Carbon Neutral

Ideal for everyday prints

Performer

Performer is a reliable and consistent paper offering enhanced whiteness and high performance.

Product SpecificationsMoisture Content 4.5%Opacity 93%CIE Whiteness 167GSM 80Thickness 107

Product ListingSize Reams Per Carton Part NumberA4 (Long Grain) 5 103R00011A3 (Short Grain) 3 103R00012

Environmental Accreditation• NCOS (Carbon Neutral)• FSC® Certified

High performance everyday prints

Business Idol+

Business is the ideal 85gsm sheet for producing a high quality colour print or conventional black and white on a high smooth surface.

Idol+ is ideal for producing high quality, vibrant, luscious colour on a bright, heavier weight, super smooth surface.

Product SpecificationsMoisture Content 4.5%Opacity 95%CIE Whiteness 167GSM 85Thickness 107

Product ListingSize Reams Per Carton Part NumberA4 (Long Grain) 5 103R00013A3 (Short Grain) 3 103R00014

Environmental Accreditation• NCOS (Carbon Neutral)• FSC® Certified

High white, high smooth for superb colour and black and white prints

High white, super smooth digital colour for a high end finish

Everyday use

Everyday use

Everyday use

Everyday colour use

Product SpecificationsMoisture Content 4.5%Opacity 95%CIE Whiteness 170GSM 100Thickness 115

Product ListingSize Reams Per Carton Part NumberA4 (Long Grain) 5 103R00049A3 (Short Grain) 3 103R00050SRA3 N/A 103R00212

Environmental Accreditation• FSC® Certified• Carbon Neutral• Ecolabel

9

Product SpecificationsMoisture Content 4.5%Opacity 90.8%CIE Whiteness 150GSM 80Thickness 101

Product ListingSize Reams Per Carton Part NumberA4 (Long Grain) 5 003R91170A3 (Short Grain) 3 003R91171

Environmental Accreditation• PEFC™ certified• Made from 50% Recycled Products

Product SpecificationsMoisture Content 4.5%Opacity 93% - 99%CIE Whiteness 168 +/- 3 CIEGSM 90 - 350Thickness 100 - 350 µm

Product ListingGSM A4 A3 SRA390 003R98837 003R96147 003R98840100 003R98842 003R96148 003R98845120 003R98847 003R96149 003R98854160 003R98852 003R98854 003R96151200 003R97967 003R96152 003R97969220 003R97971 003R96153 003R97973250 003R98975 003R96154 003R96155280 003R98979 003R96156 003R96157300 003R97984 003R97985 003R97983350 N/A N/A 003R98625

Environmental Accreditation• PEFC™ Certified

Colotech+™ Uncoated

Colotech+™ Uncoated is a premium grade paper that has been highly engineered to produce excellent colour reproduction and enhancement.

Superior performance on an ultra smooth paper

Produced from 50%Post Consumer Recycled Fibre from Australian Waste and 50% PEFC virgin fibre, helping you to make the right choice.

Australian paper that’s 50% recycled

Everyday colour use Recycled paper range

Recycled paper range

Green Wrap®

Australian Made

Product SpecificationsMoisture Content 4.5%Opacity 95%CIE Whiteness 150GSM 80Thickness 104

Product ListingSize Reams Per Carton Part NumberA4 (Long Grain) 5 103R00202A3 (Short Grain) 3 103R00203

Environmental Accreditation

• NCOS (Carbon Neutral)• FSC® Certified • Ecolabel

• Blue Angel• Made from 100%

Recycled Products

Product SpecificationsMoisture Content 4.5%Opacity 95%CIE Whiteness 160GSM 80Thickness 104

Product ListingSize Reams Per Carton Part NumberA4 (Long Grain) 5 103R00204

Environmental Accreditation

• NCOS (Carbon Neutral)• FSC® Certified• Ecolabel• Made from 100% Recycled Products

100% post-consumer waste, de-inked and bleached without the use of any chlorine in a TCF (totally chlorine free) environment, it is whitened using oxygen and hydrogen peroxide.

A high white sheet produced from 100% recycled fibre sourced from sustainably managed sources.

100% post consumer waste recycled

High white and 100% recycled

Recycled paper range

Green Wrap®

Premium 100Green Wrap®

Pure 100

10

With our wide range of papers with different specifications and qualities, we’ve made it easy to find what’s best for your printing needs.

Product Positioning

GoodEveryday Black and White

BetterQuality Black and White

BestMultipurpose Colour and Black and White

PremiumEveryday Colour

SuperiorSuperior Colour

Colour Digital Range

Everyday Printing

11

Help us make a positive difference to an Australian community throughour certified copy papers.

Together We Can Make a World of Difference

Fuji Xerox Australia is committed to responsible paper production, procurement and use. We have a long-term commitment to improving sustainability performance, our own, our industry and our customers. Our vision is to achieve sustainable outcomes for all stakeholders.

Our aim is to demonstrate and promote compliance with recognised social and environmental standards and ensure our products met community expectations of responsible product stewardship.

Green Wrap® Pure, Green Wrap® Premium, Performer, Business are FSC® certified NCOS certified papers, that are now a continuation of our commitment with the added benefit ensuring environmental impact of paper production is minimised and delivering additional environmental and societal benefits through our carefully chosen carbon offset projects. Papers are traceable to certified sources.

For more information on these projects visit the website: www.fxs.com.au/carbonneutral

“It’s important that this happens and the land is continually looked after and managed, that our culture continues” Dr Tommy George - widely respected elder from the Kuku-Thaypan clan.

We are proud to support the: Cape York Pormpuraaw controlled savannah burning project.

Cape York wildlife

We are proud to support the: Sustainable Solutions for Cambodian Households project.

We are proud to support the:

The Kariba REDD+ Project.

Fuji Xerox supports the development in the Cambodian community project, replacing traditional stoves with efficient cook stoves.

The Karibe REDD+ project aims to reduce deforestation and forest degradation through a range of activities including education of local communities to sustainably increase the productivity of their land.

For more information or detailed product specifications, call

Fuji Xerox Australia Pty Ltd ABN 63 000 341 819

Level 1, 101 Waterloo Road, Macquarie Park NSW 2113Phone (02) 9856 5000 Fax (02) 9856 5003

13 14 11www.fxs.com.au

Fuji Xerox reserves the right to change the specifications of the products described herein without notice.

Xerox, Xerox and Design, as well as Fuji Xerox and Design and Colotech+ are registered trademarks or trademarks of Xerox Corporation in Japan and/or other countries and are used under license. Green Wrap is a registered trademark of Fuji Xerox Co., Ltd. Other trademarks are the property of their respective owners.

Printed on Colotech+™ Uncoated 160gsm

AUGUST 2015