•The other install remnant loader for machining remnant ...
Transcript of •The other install remnant loader for machining remnant ...
2 SPINDLE / 2 GANG SLIDE
MG42 / MG51/ MG67CNC SWISS TURN
Item
Capability
Construction
OD tools
ID Tools
Power Driven
tools
Special Tool (OPT)
Slide
Main Spindle
Sub Spindle
Specification ModelRemark
Detail Item
Max Machin'g
Spindle travel
No of Spindle
Gang Slide
Control Axes
No. of tools
Tool shank
Front tool sleeve
Max Drill'g capability
Max Tap'g Capability
Cross (Main)
Front (Main)
Front (Sub)
Cross (Sub)
Motor Power
RPM
Add Control axis
Basic
3rd Gang Slide
Index angle
RPM
Motor Power
Index angle
RPM
Motor Power
MG42
42mm
450mm
25 x 25mm
16mm
M12
2.2KW
4,000
0.001 C-axis
6,000
5.5KW (7.5KW OPT)
0.001 C-axis
6,000
5.5KW
MG51
51mm
450mm
25 x 25mm
16mm
M12
2.2KW
4,000
0.001 C-axis
6,000
7.5KW (11KW OPT)
0.001 C-axis
6,000
5.5KW (7.5KW OPT)
MG67
67mm
450mm
25 x 25mm
16mm
M12
2.2KW (3.0 OPT)
4,000
0.001 C-axis
5,000
7.5KW (11KW OPT)
0.001 C-axis
5,000
7.5KW (11KW OPT)
2 sets (Main/Sub)
2 sets (Main/Sub)
From 8 axes to 12 axes
7 ea (main/sub)
from 5ea to 7ea (main/sub)
Install on Gang Slide
Main Z1, X1, Y1 Sub Z2, X2, Y2
3rd path Z3, X3, Y3
4 ea
4 ea
4 ea (OPT)
4 ea (OPT)
Standard Accessories1. Main Spindle Chuck sleeve2. Sub Spindle Chuck sleeve3. Spindle C-axis control (Main & Sub)4. Spindle clamp unit (Main & Sub)5. 6 station OD Bite Holder (Main & Sub)6. 5 position sleeve holder for ID Tools (Main & Sub)7. 4 Cross Drill for main (Integrated type)8. 4 Front rotation tools (Main & Sub)9. Pneumatic Unit10. Hydraulic unit11. Automatic centralized lubrication unit12. Broken cut off tool detector13. Work light14. Parts ejector for sub spindle15. Parts catcher for sub spindle16. Parts conveyor for sub spindle17. Bar feeder interface
Optional Accessories1. 4 Cross drill for sub spindle (integrated type) 2. 4 Front drill for sub spindle (integrated type) 3. Power driven tools with B axis for main & sub4. Modular Tooling (Main & Sub)5. Special tooling6. Coolant flow detector7. Bar feeder8. M-code oil blow9. High pressure coolant10. Chip conveyor11. Chip box12. Auto fire extinguisher13. Mandrel chuck for ID chucking14. Power chuck for forged parts15. Power chuck for ID chucking16. Auto loader for forged parts17. Stocker for forged parts18. Re-machining system for short material from guide bush machine
19. Additional Tool Slide (3 path)
※ Specification can be for performance improvement
Long Bar, Remnant in Common•One spindle install bar feeder for long bar,•The other install remnant loader for machining remnant•Both applicable on same time•Increase profit through re-machining of remnant
GUIDE BUSH Applicable•Guide Bush position will vary according to turning necessity.•High accuracy machining for Long bar
Custom Tooling
·COLLET·
·Free End Machining· ·Guide Bush Machining·
·Free End Machining· ·Center Machining· ·Collet Chuck Static Type· ·Collet Chuck Pull Type·
·MANDREL· ·Power Chuck· ·Hyd’Chucking Cyl’· 9, Seonggok-ro 146beon-gil, Danwon-gu, Ansan-si, Gyeonggi-do 425-834, KoreaT. 82-2-578-5460, 070-8680-8420 F. 82-2-578-5462 E-mail. [email protected]
MEPLETE INDUSTRY www.meplete.com
영)메플릿MG42/MG51/MG67화판 1904.1.3 7:28 PM 페이지1
STEEL & ALLOY APPLICATION•High Power Moter (Stardard Configuration)•High Pressure Coolant System
STANDARD (with Power Tool)
LONG STROKE TYPE (for Special Tool Application)•for Installing Special Tool like Angle Machining
TURNING TYPE (Without Power Tools)
3rd GANG SLIDE type(Simultaneous Turning for CT reduction)•This slide is good to machine simultaneously with first gang slide.
•Simultaneous machining for CT reduction
•Special Tool is applicable for Special Application
MG42 / MG51/ MG67Main Spindle
Sub Spindle
OD Tools 7 ea (25x25)ID Tools (Sleeve Holder) 5 eaPower Tool Cross Drill 4 ea
Front Drill 4 eaLong Hole Drill (OPT) 2 ea
OD Tools 7 ea (25x25)ID Tools (Sleeve Holder) 5 eaPower Tool Cross Drill (OPT) 4 ea
Front Drill (OPT) 4 ea
TOOLS for Main Spindle
TOOLS for Sub Spindle
OD Tools 7 ea (25x25)ID Tools (Sleeve Holder) 5 eaPower Too Cross Drill 4 ea
Front Drill 4 ea Special Tool (Hobbing, Angle Turn etc)
OD Tools 7 ea (25x25)ID Tools (Sleeve Holder) 5 eaPower Tool Cross Drill (OPT) 4 ea
Front Drill (OPT) 4 eaSpecial Tool (Rolling, Turning Axes, etc)
TOOLS for Main Spindle
TOOLS for Sub Spindle
OD Tools 10 eaID Tools (Sleeve Holder) 7 ea
OD Tools 10 eaID Tools (Sleeve Holder) 7 ea
3rd GANG SLIDE (OPT)OD Tool 3 ea (25x25)or Rotation Tool 2 eaor Special Tool
CONTROL AXES
·High Pressure Coolant System· ·Coolant System Impact· ·SUS Chip·
영)메플릿MG42/MG51/MG67화판 1904.1.3 7:29 PM 페이지4