The Original Equipment Product Specifications Used in the...

I n t e r n a t i o n a l C o m p a r i s o n P r o g r a m

The Original Equipment Product Specifications Used in the ICP

2005 Round

Reference Material for Session 3

Regional Coordinators Meeting September 28-30, 2009

Washington DC

ICP: Equipment Survey

2

Basic Heading: General Purpose Machinery Basic Heading Code: 1501121 Product Name: AIR COMPRESSOR (Small) Product Code: 150112101

DESCRIPTION: A small self-contained unit with a compressor, electric motor, and valves mounted on a tank capable of holding a reserve volume of air. SPECIFICATIONS: These compressors are typically capable of 10 bars of pressure and are driven by a 750 watt electric motor. Tank volume varies from 20 to 35 litres.

SELECTION MANUFACTURER MODEL □ Preferred Atlas-Copco LE2-10 □ Unspecified Alternate CHARACTERISTICS (For Unspecified Alternate) Motor Power (kW): _______________ Pressure (bars): ________________ Tank Volume (Liters): _______________

Terms & Conditions: Cost Estimate (2011) Cost Estimate (2012) A Equipment Costs (in national currency) B Installation if not included C Transportation if not included D Non-deductible tax if not included E Deductible tax if included F Sub Total (B + C+D - E)

Total Cost [A + F]

PRICING INFORMATION (Source of Price) □ Distributor

□ Catalogue

□ Dealer □ Other: ___________________ □ Expert/Consultant

Comments:


3

Basic Heading: General Purpose Machinery Basic Heading Code: 1501121 Product Name: AIR COMPRESSOR (Towed Unit) Product Code: 150112102_1

DESCRIPTION: This is a self-contained trailed unit that can be towed to the work. The air compressor and the propulsion unit for the compressor are integrally mounted to the trailer chassis. SPECIFICATIONS: The compressor is generally of a screw-type architecture driven by a diesel engine. Typically, the 15 kW units are popular for driving a compressor delivering 2 m3/min @ 7 bars.

SELECTION MANUFACTURER MODEL □ Preferred Atlas-Copco XAS36 □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Unspecified Alternate) Engine (kW): _______________ Pressure (bars): ________________ Tank Volume (Liters): _______________


Total Cost [A + F]


□ Catalogue


Comments:


4



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Sullair □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Unspecified Alternate) Engine (kW): _______________ Pressure (bars): ________________ Tank Volume (Liters): _______________


Total Cost [A + F]


□ Catalogue


Comments:


5



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Ingersol Rand □ Unspecified Alternate CHARACTERISTICS (For Unspecified Alternate) Engine (kW): _______________ Pressure (bars): ________________ Tank Volume (Liters): _______________


Total Cost [A + F]


□ Catalogue


Comments:


6

Basic Heading: General Purpose Machinery Basic Heading Code: 1501121 Product Name: INDUSTRIAL DIESEL ENGINE - HEAVY DUTY (Tier2 Stage2) Product Code: 150112103_1 DESCRIPTION: Heavy-Duty Engines are a class of engine designed for stationary or mobile applications where the power demand from the engine is consistently 80 % or more of the engine rating. Although typically diesel, these engines are adaptable to any fuel. Under the severe demand placed on these engines, they are expected to outlive industrial engines by at least 2 to 1. This type of engine is typically 4-cycle in configuration, but not exclusively. There are 2-cycle configurations available, but these are disappearing fast due to emission regulations, which are extremely difficult to achieve. This is a popular global engine size. SPECIFICATIONS: A basic 4-cycle 6-cylinder diesel producing 300 kW of power and meeting Tier 2 Stage II engine emissions.

SELECTION MANUFACTURER MODEL □ Preferred Caterpillar 3406C □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Unspecified Alternate) Power (kW): _______________ Weight (kg): ________________ Displacement (Liters): _______________ Number of Cylinders: __________


Total Cost [A + F]


□ Catalogue


Comments:


7

Product Characteristics for Unspecified Alternates: Performance Power (kW) Emission Certification Rated Speed (rpm) Bore x Stroke (mm) Number of Cylinders No. of Cycles/Power

Stroke

Displacement (litres) Reliability Dry Weight (kg) Brake Mean Effective

Pressure (kg/mm2)

Function Engine Type □ Reciprocating □ In-Line □ Radial □ Multiple Cylinder Rows □ Rotary

Physical Installed Volume Height (mm): __________ Length (mm): __________ Width (mm): __________

Engine Fuel □ Diesel □ Gasoline □ Natural Gas

Bio Fuel □ Sewer Gas □ Alcohol □ Seed Oil

Engine Cooling □ Liquid □ Closed System □ Open System □ Air

Starting System □ Recoil □ Electric (Voltage) □ Air

Ignition (excludes diesel) □ Magneto □ Coil □ Electronic Control Module Productivity Speed Control Shut Off □ Mechanical □ Mechanical □ Electric □ Electric □ Electronic □ Electronic □ Governor Air Filtration Type: __________ Change Interval (hrs): __________ Technology □ Variable Valve Timing □ Electronic Fuel Injection □ Valve Actuation □ Variable Fuel Timing □ Pushrod □ Turbocharger/Number: __________ □ Cam Follower □ Turbocharger Watergate □ Valves per Cylinder: __________ □ Supercharger


8


SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Volvo TWD1240VE □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Unspecified Alternate) Power (kW): _______________ Weight (kg): ________________ Displacement (Liters): _______________ Number of Cylinders: __________


Total Cost [A + F]


□ Catalogue


Comments:


9


Stroke


Pressure (kg/mm2)









10


SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Cummins QSB140 □ Unspecified Alternate CHARACTERISTICS (For Unspecified Alternate) Power (kW): _______________ Weight (kg): ________________ Displacement (Liters): _______________ Number of Cylinders: __________


Total Cost [A + F]


□ Catalogue


Comments:


11


Stroke


Pressure (kg/mm2)









12

Basic Heading: General Purpose Machinery Basic Heading Code: 1501121 Product Name: INDUSTRIAL DIESEL ENGINE - HEAVY DUTY (Tier 3 Stage 3A) Product Code: 150112104 DESCRIPTION: Heavy-Duty Engines are a class of engine designed for stationary or mobile applications where the power demand from the engine is consistently 80 % or more of the engine rating. Although typically diesel, these engines are adaptable to any fuel. Under the severe demand placed on these engines, they are expected to outlive industrial engines by at least 2 to 1. This type of engine is typically 4-cycle in configuration, but not exclusively. There are 2-cycle configurations available, but these are disappearing fast due to emission regulations, which are extremely difficult to achieve. This is a popular global engine size. SPECIFICATIONS: A basic 4-cycle 6-cylinder diesel producing 300 kW of power and meeting Tier 3 Stage IIIA engine emissions.

SELECTION MANUFACTURER MODEL □ Preferred Caterpillar C13 Acert □ Unspecified Alternate CHARACTERISTICS (For Specified Alternate) Power (kW): _______________ Weight (kg): ________________ Displacement (Liters): _______________ Number of Cylinders: __________


Total Cost [A + F]


□ Catalogue


Comments:


13


Stroke


Pressure (kg/mm2)









14

Basic Heading: General Purpose Machinery Basic Heading Code: 1501121 Product Name: LIGHT INDUSTRIAL DIESEL ENGINE Product Code: 150112105 DESCRIPTION: Industrial engines are a large global population used in stationary and portable applications. They are used where access to electric power is restricted or unavailable and are often used to generate electricity for a work site or small commercial building. These engines are available in all fuel capacities as individual units or packaged complete with controls and fuel storage. They are most generally mounted on a trailer for portability. SPECIFICATIONS: Multi-cylinder in configuration, the design provides repair and replacement when worn rather than recycling. In the general global population, these engines will be 4-cycle in configuration provides power in the range of 28-30 kW.

SELECTION MANUFACTURER MODEL □ Preferred Yanmar 3TNV88-DSA □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Weight (kg): ________________ Displacement (Liters): _______________ Number of Cylinders: __________


Total Cost [A + F]


□ Catalogue


Comments:


15


Stroke

Displacement (litres) Reliability Dry Weight(kg) Brake Mean Effective

Pressure (kg/mm2)




Bio Fuel □ Seed Oil




16

Basic Heading: General Purpose Machinery Basic Heading Code: 1501121 Product Name: MARINE DIESEL – COMMERCIAL Product Code: 150112106_1

DESCRIPTION: Commercial Marine Diesels range from 50 to 75,000 kW. The specific category outlined in this space has a range of 50 to 3,000 kW. These engines are rated lower for a given displacement when compared with sport boat or pleasure marine ratings. All diesels below 3,000 kW are 4-cycle in operation. SPECIFICATIONS: For continuous service, the engines are rated about 1,500 kW.

SELECTION MANUFACTURER MODEL □ Preferred Caterpillar 3512C □ Alternate 1 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Weight (kg): ________________ Displacement (Liters): _______________ Number of Cylinders: __________


Total Cost [A + F]


□ Catalogue


Comments:


17


Stroke


Pressure (kg/mm2)


18

Basic Heading: General Purpose Machinery Basic Heading Code: 1501121 Product Name: MARINE DIESEL – COMMERCIAL Product Code: 150112106_2

DESCRIPTION: Commercial Marine Diesels range from 50 to 75,000 kW. The specific category outlined in this space has a range of 50 to 3,000 kW. These engines are rated lower for a given displacement when compared with sport boat or pleasure marine ratings. All diesels below 3,000 kW are 4-cycle in operation. SPECIFICATIONS: For continuous service, the engines are rated about 1,500 kW.

SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Cummins QSK60-D(M) □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Weight (kg): ________________ Displacement (Liters): _______________ Number of Cylinders: __________


Total Cost [A + F]


□ Catalogue


Comments:


19


Stroke


Pressure (kg/mm2)


20

Basic Heading: General Purpose Machinery Basic Heading Code: 1501121 Product Name: MARINE DIESEL ENGINE – PLEASURE Product Code: 150112107_1

DESCRIPTION: Marine Pleasure Craft Diesel Engines have replaced gasoline engines because they are more efficient, more durable, and diesel fuel is less hazardous. The advent of high-speed diesels has produced a high-horsepower engine of reasonable cost and weight compared with gasoline engines. The largest population is from 100 to 400 kW, but engines up to 2,200 kW are available for yachts. SPECIFICATIONS: These are high-performance diesel engines of about 330 to 350 kW. They can be used singly or in multiples to provide required performance for the pleasure craft.

SELECTION MANUFACTURER MODEL □ Preferred Caterpillar C7 □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Weight (kg): ________________ Displacement (Liters): _______________ Number of Cylinders: __________


Total Cost [A + F]


□ Catalogue


Comments:


21


Stroke


Pressure (kg/mm2)


22



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Cummins 450C □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Weight (kg): ________________ Displacement (Liters): _______________ Number of Cylinders: __________


Total Cost [A + F]


□ Catalogue


Comments:


23


Stroke


Pressure (kg/mm2)


24



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Volvo Penta D9-575 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Weight (kg): ________________ Displacement (Liters): _______________ Number of Cylinders: __________


Total Cost [A + F]


□ Catalogue



25

Comments:


Stroke


Pressure (kg/mm2)


26

Basic Heading: General Purpose Machinery Basic Heading Code: 1501121 Product Name: ON-HIGHWAY COMMERCIAL DIESEL ENGINE – HEAVY DUTY Product Code: 150112108_1 DESCRIPTION: Heavy-Duty On-Highway Diesel Engines are the efficient power of choice globally. These engines can be rebuilt and restored to original specifications economically. The life expectancy is about 3 million kilometers with rebuilds. Due to engine emission laws, they are universally 4-cycle in operation. A significant proportion of these engines have engine-braking features. SPECIFICATIONS: This is an engine with 6-cylinder inline architecture yielding 350 kW of power for use in large over-the-road trucks and buses.

SELECTION MANUFACTURER MODEL □ Preferred Caterpillar C13 Series □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Weight (kg): ________________ Displacement (Liters): _______________ Number of Cylinders: __________


Total Cost [A + F]


□ Catalogue


Comments:


27


Stroke


Pressure (kg/mm2)


28


SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Volvo TWD1240VE □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Weight (kg): ________________ Displacement (Liters): _______________ Number of Cylinders: __________


Total Cost [A + F]


□ Catalogue


Comments:


29


Stroke


Pressure (kg/mm2)


30


SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Cummins ISX475 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Weight (kg): ________________ Displacement (Liters): _______________ Number of Cylinders: __________


Total Cost [A + F]


□ Catalogue


Comments:


31


Stroke


Pressure (kg/mm2)


32

Basic Heading: General Purpose Machinery Basic Heading Code: 1501121 Product Name: WATER PUMP (Centrifugal) Product Code: 150112109

DESCRIPTION: Used for drinking water or pumping water for irrigation. The pump is often pressed into service to de-water flooded areas. SPECIFICATIONS: A typical integral pump-motor combination can pump (lift) water or waterborne products (trash) to dry ground. The maximum head is 50 meters using a 15 kW motor.

SELECTION MANUFACTURER MODEL □ Preferred Aermotor DMC Series □ Unspecified Alternate CHARACTERISTICS (For Alternate) Motor/Engine Power (kW): _______________ Pumping Head (Meters): ________________ Displacement (Liters/Minute): _____________


Total Cost [A + F]


□ Catalogue


Comments:


33

Basic Heading: General Purpose Machinery Basic Heading Code: 1501121 Product Name: WATER PUMP (Jet) Product Code: 150112110

DESCRIPTION: This is an electrically driven water pump for residential use. SPECIFICATIONS: Electrically driven integral motor/pump combination to lift water from shallow wells. Motor power is typically provided by a 500 - 1,000 kW motor. Shallow well pumps are typically used to lift water 8 to 10 meters.

SELECTION MANUFACTURER MODEL □ Preferred Aermotor FH Series □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Pumping Head (Meters): ________________ Flow (Liters/Minute): _____________


Total Cost [A + F]


□ Catalogue


Comments:


34

Basic Heading: General Purpose Machinery Basic Heading Code: 1501121 Product Name: AIR CONDITIONING (Residential) Product Code: 150112111

DESCRIPTION: Air Conditioners are used to maintain a comfortable temperature and humidity in residential homes, office buildings, retail stores, and businesses of diverse nature where an indoor climate can be managed. Air conditioners can be independent units with integral controls or part of heating, ventilating, and air conditioning (HVAC) system. Cooling is achieved by compressing a refrigerant to raise the refrigerant temperature and then rapidly expanding the refrigerant in the gaseous state causing a lower temperature in the heat exchanger. The heat exchanger then removes heat from the ambient air and also lowers the dew point causing moisture to leave the air and reducing its relative humidity. SPECIFICATIONS: Typically has 1 ½ tonnes cooling capacity, Service Energy Efficiency Rating (SEER) of 10, operating on 230 volts.

SELECTION MANUFACTURER MODEL □ Preferred Dayton MAKA-018JAZ □ Unspecified Alternate CHARACTERISTICS (For Alternate) Capacity (tonnes): ___________ Voltage (volts): ____________ Efficiency (SEER): _____________


Total Cost [A + F]


□ Catalogue


Comments:


35

Basic Heading: General Purpose Machinery Basic Heading Code: 1501121 Product Name: AIR CONDITIONER (Room) Product Code: 150112112

DESCRIPTION: Air Conditioners are used to maintain a comfortable temperature and humidity in residential homes, office buildings, retail stores, and businesses of diverse nature where an indoor climate can be managed. Air conditioners can be independent units with integral controls or part of heating, ventilating, and air conditioning (HVAC) system. Cooling is achieved by compressing a refrigerant to raise the refrigerant temperature and then rapidly expanding the refrigerant in the gaseous state causing a lower temperature in the heat exchanger. The heat exchanger then removes heat from the ambient air and also lowers the dew point causing moisture to leave the air and reducing its relative humidity. SPECIFICATIONS: Typically has 12,000 BtuH cooling capacity, energy efficiency rating (eer) of 9.5, operating on 115 volts at 11 amps.

SELECTION MANUFACTURER MODEL □ Preferred Westinghouse WAL123Y1A □ Unspecified Alternate CHARACTERISTICS (For Alternate) Capacity (BtuH): ___________ Energy Efficiency Rating (eer): _____________ Voltage (volts): ____________ Amperage: (amps): ___________


Total Cost [A + F]


□ Catalogue


Comments:


36

Basic Heading: General Purpose Machinery Basic Heading Code: 1501121 Product Name: ROUGH TERRAIN CRANE (Hydraulic Extendable Boom) Product Code: 150112113

DESCRIPTION: Rough Terrain Cranes are used where the operating site is not surfaced. Typically, these machines will be used on job sites to move from one lift assignment to another during the workday. The boom consists of multiple extendable hydraulic sections with jib capability. Not suitable for public road transport for distances exceeding 5 kilometers. SPECIFICATIONS: These machines have a 2,500 kg load capacity and a maximum lift height of approximately 7.2 meters with 75 kW power.

SELECTION MANUFACTURER MODEL □ Preferred Unic UR506 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): ___________ Weight (kg): ____________


Total Cost [A + F]


□ Catalogue


Comments:


37

Product Characteristics for Unspecified Alternates: Engine Engine Emission Compliance (Tier)

Rated Engine Speed (rpm)

Net Engine Power (kW) Configuration Weight □ Fixed Mast Shipping Weight (kg): __________ □ Telescopic Boom Operating Weight (kg): _________ Maximum Lift Capacity (kg): __________ Wheel Base (mm):___________ Tread Width (mm): ___________ □ Integrated Tool Carrier Speed Range (kph): ___________ □ Work Lights Fuel Capacity (liters): ___________ □ Road Lights Maximum Vertical Lift (m): __________


38

Basic Heading: General Purpose Machinery Basic Heading Code: 1501121 Product Name: ROUGH TERRAIN CRANE Product Code: 150112114

DESCRIPTION: Rough Terrain Cranes are used where the operating site is not surfaced. Typically, these machines will be used on job sites to move from one lift assignment to another during the workday. The boom consists of multiple extendable hydraulic sections with jib capability. Not suitable for public road transport for distances exceeding 5 kilometers. SPECIFICATIONS: The rated capacity of this crane is 23 tonnes at an operating radius of 2.5 metres. Engine power is 114 kW and the extended boom length is 23 meters.

SELECTION MANUFACTURER MODEL □ Preferred Grove RT525E □ Unspecified Alternate CHARACTERISTICS (For Alternate) Rated Capacity (tonnes @ 2.5 meters): _______________ Extended Boom Length (meters): _______________ Engine Power (kW): ____________


Total Cost [A + F]


□ Catalogue


Comments:


39



Net Engine Power (kW) Configuration Weight □ Fixed Mast Shipping Weight (kg): __________ □ Telescopic Boom Operating Weight (kg): _________ Maximum Lift Capacity (kg): __________ Wheel Base (mm):___________ Tread Width (mm): ___________ □ Integrated Tool Carrier Speed Range (kph): ___________ □ Work Lights Fuel Capacity (liters): ___________ □ Road Lights Maximum Vertical Lift (m): __________ Maximum Horizontal Reach from Front Axle (m): __________


40

Basic Heading: General Purpose Machinery Basic Heading Code: 1501121 Product Name: ROUGH TERRAIN FORKLIFT (Extendable Boom) Product Code: 150112115_1 DESCRIPTION: A Rough Terrain Forklift is a construction site tool for moving materials to workers on the site. Telescopic boom forklifts are purpose-built machines that usually have a straight frame and rear-wheel Ackerman steering. Some manufacturers offer all-wheel steering. A telescopic boom is adapted to the frame, making it possible to move material vertically and horizontally. SPECIFICATIONS: These machines have a 2,500 kg load capacity and a maximum lift height of approximately 7.2 meters with 75 kW power.

SELECTION MANUFACTURER MODEL □ Preferred Caterpillar TH220B □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Engine Power (kW): _______________ Lift Height (metres): _______________ Lift Capacity (kg): ____________


Total Cost [A + F]


□ Catalogue


Comments:


41





42


SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 JCB 530-70 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Engine Power (kW): _______________ Lift Height (metres): _______________ Lift Capacity (kg): ____________


Total Cost [A + F]


□ Catalogue


Comments:


43





44


SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Manitou MVT628T □ Unspecified Alternate CHARACTERISTICS (For Alternate) Engine Power (kW): _______________ Lift Height (metres): _______________ Lift Capacity (kg): ____________


Total Cost [A + F]


□ Catalogue


Comments:


45





46

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: CRAWLER DOZER (Large) Product Code: 150113110_1

DESCRIPTION: A Large Crawler Dozer is used to dislodge loose rock, virgin hard rock deposits, virgin soil and disturbed earth. The dislodged material can be efficiently moved up to 150 meters by pushing the material in front of the blade. They are used in high-production mining, large-scale land clearing, and large-scale public works such as highways, buildings, and harbors. SPECIFICATIONS: A typical large-sized bulldozer will weigh up to 113,000 kg and be powered by an engine of 220 – 600 kW. However, typically the most popular size of bulldozer in this class has a weight of 45,000 kg and is powered by a 250 –350 kW engine. The operator sits in an enclosed roll over protective structure (ROPS) to operate the machine.

SELECTION MANUFACTURER MODEL □ Preferred Caterpillar D8T □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


47

Product Characteristics for Unspecified Alternates Engine Track Engine Emission Compliance Level

Track Gauge (mm)

Net Engine Power (kW) Track Length on Ground Plane (mm)


Standard Track Shoe Width (mm)

Optional Track Shoe width (mm)

Weight Shipping Weight (kg) Operating Wt (kg) Options □ Ripper Option □ Dozer Option □ Tilt □ Side Cast □ Winch Option □ Bulk Material □ Laser Guidance Track Configuration: Drawbar: □ Triangular (High Sprocket) □ Fixed □ Conventional (Low Sprocket) □ Swinging Fuel Capacity (liters): __________ Speed Range (KPH): _____________ □ Work Lights □ Forestry Sweeps


48



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Caterpillar D9T □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


49


Track Gauge (mm)







50



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Komatsu 155A-5 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


51


Track Gauge (mm)







52

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: CRAWLER DOZER (Medium) Product Code: 150113111_1

DESCRIPTION: A Medium Crawler Dozer is used to dislodge loose rock, virgin soft rock deposits, virgin soil and disturbed earth. The dislodged material can be efficiently moved up to 150 meters by pushing the material in front of the blade. They are used to clear land of small trees and debris as well as leveling space for buildings and roadways. SPECIFICATIONS: A typical medium-sized Crawler Dozer will weigh approximately 25,300 kg and be powered by a 138 kW engine. The operator will be seated in an open or enclosed rollover protective structure (ROPS). Travel speed can be up to 12 kph.

SELECTION MANUFACTURER MODEL □ Preferred Komatsu D70LE-8 □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


53


Track Gauge (mm)







54



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Caterpillar D6R – Series II □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


55


Track Gauge (mm)







56



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Liebherr PR734 Litronic □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


57


Track Gauge (mm)







58

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: CRAWLER DOZER (Small) Product Code: 150113112_1

DESCRIPTION: A Small Crawler Dozer is used to dislodge loose rock, virgin soil, and disturbed earth. The dislodged material can be efficiently moved up to 150 meters pushing the loosened material in front of the blade. They are used in confined spaces on worksites where larger bulldozers cannot maneuver effectively. SPECIFICATIONS: A typical small bulldozer will weigh approximately 7,300 kg and be powered by a 57 kW diesel engine. The operator will be seated in an open or closed roll over protective structure (ROPS). Travel speed up to 10 kph.

SELECTION MANUFACTURER MODEL □ Preferred Caterpillar D3C □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


59


Track Gauge (mm)







60



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Komatsu D31EX-21 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


61


Track Gauge (mm)







62



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Case 550H □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


63


Track Gauge (mm)







64

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: CRAWLER LOADER (Large Track) Product Code: 150113113_1

DESCRIPTION: A Crawler Loader is a specialized machine using track-type mobility for heavy digging tasks. It can lift a quantity of material after it is dislodged into a truck, hopper, or other containment or material transport device. These machines provide stability and flotation in excess of their Wheel Loader cousins. They are described and identified in ISO 6165. Bucket capacity ratings are specified in ISO 14397. SPECIFICATIONS: This is typically a machine in the 170-kW power category with at least a 3m3 bucket capacity and an enclosed roll over protective structure (ROPS) for the operator.

`SELECTION MANUFACTURER MODEL □ Preferred Caterpillar 973C □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


65

Product Characteristics for Unspecified Alternates Engine Implement Hydraulic Capacity Engine Emission Compliance Level

Flow (liters/min)

Net Engine Power (kW) Regulated Pressure (pascals)

Operator Station □ Walk Behind □ Standing □ Seated: □ Open Roll Over Protective Structure/Noise Rating (dBA): __________ □ Enclosed Cab/Noise Rating (dBA): __________ Drivetrain □ Manual Shift/Number of Speeds: __________ □ Power Shift/ Number of Speeds: __________ □ Hydrostatic/Number of Speeds: __________ Steering □ Clutch and Brake □ Skid Turn □ Differential and Brake □ Power Turn □ Independent Power □ Counter Rotating Track Turn □ Mechanical □ Hydrostatic Bucket Type General Purpose (m3): __________ Rock (m3): __________ Bulk Material (m3): __________ 4 In One (m3): __________ □ Integrated Tool Carrier Configuration: Fuel Capacity (liters): __________ Speed Range (KPH): _____________ □ Ripper Option Weight with Standard Bucket: __________


66



`SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 John Deere 755C □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


67


Flow (liters/min)




68



`SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Liebherr LR632B Litronic □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


69


Flow (liters/min)




70

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: CRAWLER LOADER (Medium Track) Product Code: 150113114_1

DESCRIPTION: A Crawler Loader is a specialized machine using track-type mobility for heavy digging tasks. It can lift a quantity of material after it is dislodged into a truck, hopper, or other containment or material transport device. These machines provide stability and flotation in excess of their Wheel Loader cousins. They are described and identified in ISO 6165. Bucket capacity ratings are specified in ISO 14397. SPECIFICATIONS: This is typically a machine in the 95 kW power category with at least a 1.8m3 bucket rating and an enclosed roll over protective structure (ROPS) for the operator.

`SELECTION MANUFACTURER MODEL □ Preferred Caterpillar 953C □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


71


Flow (liters/min)




72



`SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Liebherr LR622B Litronic □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


73


Flow (liters/min)




74



`SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 John Deere 655C □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


75


Flow (liters/min)




76

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: CRAWLER LOADER (Small Track) Product Code: 150113115

DESCRIPTION: A Crawler Loader is a specialized machine using track-type mobility for heavy digging tasks. It can lift a quantity of material after it is dislodged into a truck, hopper, or other containment or material transport device. These machines provide stability and flotation in excess of their Wheel Loader cousins. They are described and identified in ISO 6165. Bucket capacity ratings are specified in ISO 14397. SPECIFICATIONS: This is typically a machine in the 74 kW power category with at least a 1m3 bucket capacity rating. The operator is seated in an enclosed roll over protective structure (ROPS).

`SELECTION MANUFACTURER MODEL □ Preferred Caterpillar 973C939C □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


77


Flow (liters/min)




78

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: DUMPER (Rigid Frame) Product Code: 150113116_1

DESCRIPTION: A dumper is an off-road specialized hauler for bulk material. Rigid Frame Dumpers are typically found in quarry or mining operations where haul roads are well maintained. They are typically rated in tonnes and are found in the 30 to 340 tonne capacity range. These machines are defined in ISO 6165. SPECIFICATIONS: These trucks vary in size from 35 to 360 tonnes. The most popular is the 70-tonne truck with an engine rating of about 550 kW.

`SELECTION MANUFACTURER MODEL □ Preferred Komatsu HD465-7 □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


79

Product Characteristics for Unspecified Alternates Engine Weight Engine Emission Compliance (Tier)

Shipping Weight(kg)

Net Engine Power (kW) Operating Wt (kg) Tread Width (mm): Wheelbase (mm): Speed Range (kph):


80



`SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Caterpillar 775E □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


81


Shipping Weight(kg)



82



`SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Terex TR70 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


83


Shipping Weight(kg)



84

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: DUMPER (over 30 tonnes) Product Code: 150113117_1 DESCRIPTION: These machines are used in conjunction with excavators or loaders under rough terrain conditions. Articulated dumpers range from 12 - 37 cubic meter capacity. These machines are defined in ISO 6165. SPECIFICATIONS: A dumper is an all-wheel-drive all-terrain articulated steerable hauler for transport of materials in extreme off-highway conditions. In the over-30 tonne class, the 40 tonne variant is the most popular with an engine power of approximately 325 kW.

SELECTION MANUFACTURER MODEL □ Preferred Komatsu HM400-1 □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


85


Shipping Weight(kg)



86


SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Caterpillar 740 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


87


Shipping Weight(kg)



88


SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Volvo A40D □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


89


Shipping Weight(kg)



90

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: DUMPER (up to 30 tonnes) Product Code: 150113118_1 DESCRIPTION: These machines are used in conjunction with excavators or loaders under rough terrain conditions. Articulated dumpers range from 12 - 37 cubic meter capacity. These machines are defined in ISO 6165. SPECIFICATIONS: A Dumper is an all-wheel-drive all-terrain articulated steerable hauler for transport of materials in extreme off-highway conditions. The 30-tonne class is very popular and is typically powered by a 230 kW engine.

SELECTION MANUFACTURER MODEL □ Preferred John Deere 250D □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


91


Shipping Weight(kg)



92


SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Caterpillar 730 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


93


Shipping Weight(kg)



94


SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Komatsu HM300-1 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


95


Shipping Weight(kg)



96

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: HYDRAULIC EXCAVATOR (Large) Product Code: 150113119_1 DESCRIPTION: A Hydraulic Excavator is a category of machine that uses arms moved by hydraulics to dislodge material or excavate below grade line. A separate swing function and control permits lateral displacement of material spoil from the bucket. Typically, the swing function can provide 360 degrees of rotation. Although these machines are inefficient earthmovers, they are extremely flexible on a job site and therefore very popular. These machines are described in ISO 6165. SPECIFICATIONS: This class of excavator has an operating weight of approximately 45-50 tones and net engine power is in the 250 kW range.

SELECTION MANUFACTURER MODEL □ Preferred Caterpillar 345CL □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


97

Product Characteristics for Unspecified Alternates Engine Engine Emission Compliance (Tier)

Net Engine Power (kW)

Weight Capacity Shipping Weight(kg) Bucket Capacity(m3) Operating Wt (kg) Craning Capacity (m3) Fuel Capacity (liters) Speed Swing Speed Ground Speed


98

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: HYDRAULIC EXCAVATOR (Large) Product Code: 150113119_2 DESCRIPTION: A Hydraulic Excavator is a category of machine that uses arms moved by hydraulics to dislodge material or excavate below grade line. A separate swing function and control permits lateral displacement of material spoil from the bucket. Typically, the swing function can provide 360 degrees of rotation. Although these machines are inefficient earthmovers, they are extremely flexible on a job site and therefore very popular. These machines are described in ISO 6165. SPECIFICATIONS: This class of excavator has an operating weight of approximately 45-50 tones and net engine power is in the 250 kW range.

SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Komatsu PC350-7 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


99




Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131


100

Product Name: HYDRAULIC EXCAVATOR (Large) Product Code: 150113119_3 DESCRIPTION: A Hydraulic Excavator is a category of machine that uses arms moved by hydraulics to dislodge material or excavate below grade line. A separate swing function and control permits lateral displacement of material spoil from the bucket. Typically, the swing function can provide 360 degrees of rotation. Although these machines are inefficient earthmovers, they are extremely flexible on a job site and therefore very popular. These machines are described in ISO 6165. SPECIFICATIONS: This class of excavator has an operating weight of approximately 45-50 tones and net engine power is in the 250 kW range.

SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Hitachi ZAXIS450 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


101





102

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: HYDRAULIC EXCAVATOR (Compact) Product Code: 150113120_1 DESCRIPTION: A Hydraulic Excavator is a category of machine that uses arms moved by hydraulics to dislodge material or excavate below grade line. A separate swing function and control permits lateral displacement of material spoil from the bucket. Typically, the swing function can provide 360 degrees of rotation. Although these machines are inefficient earthmovers, they are extremely flexible on a job site and therefore very popular. These machines are described in ISO 6165. SPECIFICATIONS: This category of excavator typically ranges from 6 – 12 tonnes and from about 40 – 60 kW in power.

SELECTION MANUFACTURER MODEL □ Preferred Caterpillar 312C □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


103





104


SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Komatsu PC110R-1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


105





106


SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Hitachi ZAXIS120 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


107





108

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: HYDRAULIC EXCAVATOR (Mini) Product Code: 150113121_1

DESCRIPTION: A Hydraulic Excavator is a category of machine that uses arms moved by hydraulics to dislodge material or excavate below grade line. A separate swing function and control permits lateral displacement of material spoil from the bucket. Typically, the swing function can provide 360 degrees of rotation. Although these machines are inefficient earthmovers, they are extremely flexible on a job site and therefore very popular. These machines are typically less than 6,000 kg. They are described in ISO 6165. SPECIFICATIONS: A popular size in this category is the 20 kW model of 3,300 kg operating weight

SELECTION MANUFACTURER MODEL □ Preferred Caterpillar 303CR □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Unspecified Alternate) Power (kW): _______________ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


109





110



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Komatsu PC30MR-Z □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Unspecified Alternate) Power (kW): _______________ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


111





112



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Hitachi ZAXIS27U □ Unspecified Alternate CHARACTERISTICS (For Unspecified Alternate) Power (kW): _______________ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


113





114

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: MOTOR GRADER Product Code: 150113122_1 DESCRIPTION: The Motor Grader was developed by Caterpillar in 1931 to simplify unpaved road maintenance. This machine has evolved to fill many roles, from minor virgin trail excavation to final grade alignment. It is indispensable for haul road maintenance in quarry, mining, and construction sites. The configuration has remained constant: a 3-axis rotatable blade is suspended from a rigid frame support by axles on wheels at each end. This machine is defined and described in ISO 6165. SPECIFICATIONS: Motor Graders vary in power from about 60-373 kW. The typical and most popular size is the 100-110 kW engine rated capacity machine.

SELECTION MANUFACTURER MODEL □ Preferred Caterpillar 12H □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


115



Weight Shipping Weight (kg) Operating Weight (kg) Blade Attachment Blade Length (m): __________ □ Ripper Attachment Blade Height (mm): __________ □ Scarifier Attachment Laser Blade Level: __________


116


SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Caterpillar 120H □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


117





118


SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Komatsu GD511A-1 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


119





120

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: SKID STEER LOADER Product Code: 150113123_1 DESCRIPTION: Skid Steer Loaders are a compact mutation of wheel loaders developed, as a class, to provide a loader function in very restricted operating spaces. These machines are used with a large group of attachments too numerous to mention here. They typically can operate at speeds up to 12 kph and are steered like track machines, mounted on wheels. Skid steer loaders are defined in ISO 6165 and capacity ratings are found in ISO 14392 Parts 1 and 2. SPECIFICATIONS: The ride-on models will vary in power from 16 to approximately 60 kW in power. The operator sits in a protective cab environment and typically enters or leaves the cab through the front of the machine and over the working tool. Operating weights can vary from about 1,200 to 4,000 kg. The most popular model in this category is the 50 kW machine.

SELECTION MANUFACTURER MODEL □ Preferred Bobcat S205 □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


121

Product Characteristics for Unspecified Alternates Engine Implement Engine Emission Compliance (Tier)

Flow (liters/min)


Bucket Type □ General Purpose (m3): __________ □ 4-in-One (m3): __________ □ Rock (m3): __________ □ Integrated Tool Carrier □ Bulk Material (m3): __________ Weight with Standard Bucket (kg): __________ Wheel Base (mm):___________ Tread Width (mm): ___________ □ Ride Control Speed Range (kph): ___________ □ Work Lights Fuel Capacity (liters): ___________ □ Road Lights


122


SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Caterpillar 236B □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


123


Flow (liters/min)


Bucket Type □ General Purpose (m3): __________ □ 4-in-One (m3): __________ □ Rock (m3): __________ □ Integrated Tool Carrier □ Bulk Material (m3): __________ Weight with Standard Bucket (kg): __________ Wheel Base (mm):___________ Tread Width (mm): ___________ □ Ride Control Speed Range (kph): ___________ □ Work Lights Fuel Capacity (liters): ___________


124


SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Komatsu SK1020-5 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


125


Flow (liters/min)


Bucket Type □ General Purpose (m3): __________ □ 4-in-One (m3): __________ □ Rock (m3): __________ □ Integrated Tool Carrier □ Bulk Material (m3): __________ Weight with Standard Bucket (kg): __________ Wheel Base (mm):___________ Tread Width (mm): ___________ □ Ride Control Speed Range (kph): ___________ □ Work Lights Fuel Capacity (liters): ___________


126

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: SKID STEER LOADER (Rubber Track) Product Code: 150113124 DESCRIPTION: Skid Steer Loaders are a compact mutation of wheel loaders developed, as a class, to provide a loader function in very restricted operating spaces. These machines are used with a large group of attachments too numerous to mention here. They typically can operate at speeds up to 12 kph and are steered like track machines, mounted on rubber track. Skid steer loaders are defined in ISO 6165 and capacity ratings are found in ISO 14392 Parts 1 and 2. SPECIFICATIONS: The ride-on models will vary in power from 36 to approximately 60 kW in power. The operator sits in a protective cab environment and typically enters or leaves the cab through the front of the machine and over the working tool. Operating weights can vary from about 3,200 to about 4,200 kg. The most popular model in this category is the 50 kW machine.

SELECTION MANUFACTURER MODEL □ Preferred Bobcat T190 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


127


Flow (liters/min)




128

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: TRENCHLESS Product Code: 150113125_1 DESCRIPTION: Trenchless machinery is used to install underground utilities where an exposed trench is not feasible or practical. These machines reached maturity during the installation of fiber optics communication hardware. SPECIFICATIONS: Machines vary in weight from 3,500 to 140,000 kg. The machines are not measured in horsepower, but in spindle torque ranging from 1,500 Nm to 70,000 Nm. For electrical and telephone installation work, a typical model is 10,000 kg, with spindle torque of 4,000 Nm. A popular machine in this category is Vermeer D24x40 Series II.

SELECTION MANUFACTURER MODEL □ Preferred Vermeer D24x40 Series II □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


129

Product Characteristics for Unspecified Alternates Engine Weight Engine Emission Compliance (Tier __)

Shipping Weight (kg)

Net Engine Power (kW) Operating Weight (kg)


130


SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Ditch Witch JT2720 All Terrain □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


131





132


SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 American Augers DD-4 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ □ Open ROPS Weight (kg): _______________ □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments:


133





134

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: WHEEL DOZER Product Code: 150113126_1

DESCRIPTION: A Wheel Dozer is used in special applications to provide high mobility spreading materials on large earthmoving projects, or handle clean-up in quarry operations. They are defined by ISO 6165. SPECIFICATIONS: These machines typically range in power from 190 to 660 kW. The most popular size is the 400 kW dozer used in stockpiling bulk materials.

SELECTION MANUFACTURER MODEL □ Preferred Caterpillar 834H □ Alternate 1 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


135

Product Characteristics for Unspecified Alternates Engine Tires Engine Emission Compliance (Tier)

Tire Size, Standard

Net Engine Power (kW) Tire Size, Optional Operator Controls Speed Range (km/hr): ________________ □ Mechanical □ Hydraulic Fuel Capacity (liters): ________________ □ Electro-Hydraulic □ Electronic Weight


136

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: WHEEL DOZER Product Code: 150113126_2

DESCRIPTION: A Wheel Dozer is used in special applications to provide high mobility spreading materials on large earthmoving projects, or handle clean-up in quarry operations. They are defined by ISO 6165. SPECIFICATIONS: These machines typically range in power from 190 to 660 kW. The most popular size is the 400 kW dozer used in stockpiling bulk materials.

SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Komatsu WD600-3 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


137

Product Characteristics for Unspecified Alternates Engine Tires Engine Emission Compliance (Tier)

Tire Size, Standard

Net Engine Power (kW) Tire Size, Optional Operator Controls Speed Range (km/hr): ________________ □ Mechanical □ Hydraulic Fuel Capacity (liters): ________________ □ Electro-Hydraulic □ Electronic Weight


138

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: WHEEL LOADER (Large) Product Code: 150113127_1

DESCRIPTION: Wheel Loaders can dislodge soil and move dislodged rock and minerals. The bucket can be used to load material in hauling units or move the material short distances in stockpiling operations. Speed of operation in transport and travel is an advantage over track loaders in the aforementioned tasks. The wheel loader is described in ISO 6165 and the rated capacity is defined by ISO 14397. SPECIFICATIONS: This category has a wide specification range in power and bucket capacity. Engine power ranges from 400 to 1,175 kW with operating weights ranging from 45 to 205 tonnes. Loaders at the low rating in this range are used for earthmoving whereas loaders at the high ratings are used for quarry and surface mining.

SELECTION MANUFACTURER MODEL □ Preferred Caterpillar 994F □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Engine (kW): _______________ Bucket Capacity (m3): ___________ Operating Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


139


Flow (liters/min)




140



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Komatsu WA1200-3 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Engine (kW): _______________ Bucket Capacity (m3): ___________ Operating Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


141


Flow (liters/min)




142



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Kawasaki 135ZV □ Unspecified Alternate CHARACTERISTICS (For Alternate) Engine (kW): _______________ Bucket Capacity (m3): ___________ Operating Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


143


Flow (liters/min)




144

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: WHEEL LOADER (Mid-Size) Product Code: 150113128_1

DESCRIPTION: Medium Wheel Loaders are used to load materials into hauling units, maintain aggregate stockpiles, and charge aggregate plant machinery. The speed and flexibility to maneuver rapidly on the worksite, while providing large bucket capacity, is highly advantageous. The loader is described in ISO 6165 and the rated capacity is defined by ISO 14397. SPECIFICATIONS: This loader category spans an engine power range from 120 to 240 kW and operating weights range from 13 to 28 tonnes.

SELECTION MANUFACTURER MODEL □ Preferred Caterpillar 950G Series II □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Engine (kW): _______________ Bucket Capacity (m3): ___________ Operating Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


145

PRODUCT CHARACTERISTICS Engine Implement Engine Emission Compliance (Tier)

Flow (liters/min)




146





Total Cost [A + F]


□ Catalogue


Comments:


147


Flow (liters/min)




148





Total Cost [A + F]


□ Catalogue


Comments:


149


Flow (liters/min)




150

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: WHEEL LOADER (Compact) Product Code: 150113129_1

DESCRIPTION: A Compact Wheel Loader adapted for work in confined spaces handling bulk aggregate and bulk materials. This machine is very limited in ability to dislodge virgin soil, but can move stockpiled materials. The machine is too small to load trucks. The wheel loader is described in ISO 6165 and the rated capacity is defined by ISO 14397. SPECIFICATIONS: This is a very populous category with both global and regional producers. Engine power ranges from 30 to 75 kW. Operating weight will range from 4,000 to 8,500 kg. Loaders at the lower power ranges use hydrostatic propulsion drivetrains whereas loaders at the high power range will use mechanical drivetrains.

SELECTION MANUFACTURER MODEL □ Preferred Caterpillar 914G □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Engine (kW): _______________ Bucket Capacity (m3): ___________ Operating Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


151


Flow (liters/min)




152





Total Cost [A + F]


□ Catalogue


Comments:


153


Flow (liters/min)




154





Total Cost [A + F]


□ Catalogue


Comments:


155


Flow (liters/min)




156

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: WHEEL LOADER (Small) Product Code: 150113130_1

DESCRIPTION: This category of wheel loader is used for a variety of worksite tasks as a material handler. It can be a dedicated aggregate/soil loader or transport and lift a variety of bulk materials using special tool adaptors. Often times these machines are sold with multiple buckets, brooms, and forks with a quick attaching system to the boom. The loader is described in ISO 6165 and the rated capacity is defined by ISO 14397. SPECIFICATIONS: These machines range from about 85 to 110 kW engine power and vary in weight from 9,000 to 13,500 kg.

SELECTION MANUFACTURER MODEL □ Preferred Caterpillar 924G □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Engine (kW): _______________ Bucket Capacity (m3): ___________ Operating Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


157


Flow (liters/min)




158





Total Cost [A + F]


□ Catalogue


Comments:


159


Flow (liters/min)




160





Total Cost [A + F]


□ Catalogue


Comments:


161


Flow (liters/min)




162

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: MINCING MACHINE (1 KW POWER) Product Code: 150113132_1

DESCRIPTION: Professional Meat Mincers generally cut meat using stainless steel cutting plates that are motor-powered. The cutting plates come in different sizes. Applications include the production of hamburger meat and sausage. SPECIFICATIONS: This is an electrically powered machine (1 KW) with more than one speed.

SELECTION MANUFACTURER MODEL □ Preferred Hobart □ Alternate 1 □ Unspecified Alternate CHARACTERISTICS Motor Power (KW): ____________ Number of Speeds: ____________ Output (kg/hr): ______________ Meat Capacity (kg): ____________ Diameter of Plate Holes (mm): _____________ Features: □ Stainless Steel Bowl □ Tinned Worm & Cylinder □ Floor Mounted □ Includes Knives, Plates etc


Total Cost [A + F]


□ Catalogue


Comments:


163

Product Characteristics for Unspecified Alternates Performance Number of Speeds Motor Power (kw) Output (kg/hr) Features □ Stainless Steel Bowl □ Tinned Worm & Cylinder □ Floor Mounted □ Includes Knives, Plates etc Meat Capacity (kg): __________ Weight (kg): ___________ Diameter of Plate Holes (mm): __________


164

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: MINCING MACHINE (1 KW POWER) Product Code: 150113132_2

DESCRIPTION: Professional Meat Mincers generally cut meat using stainless steel cutting plates that are motor-powered. The cutting plates come in different sizes. Applications include the production of hamburger meat and sausage. SPECIFICATIONS: This is an electrically powered machine (1 KW) with more than one speed.

SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Rex-Maschinen □ Unspecified Alternate CHARACTERISTICS Motor Power (KW): ____________ Number of Speeds: ____________ Output (kg/hr): ______________ Meat Capacity (kg): ____________ Diameter of Plate Holes (mm): _____________ Features: □ Stainless Steel Bowl □ Tinned Worm & Cylinder □ Floor Mounted □ Includes Knives, Plates etc


Total Cost [A + F]


□ Catalogue


Comments:


165

Product Characteristics for Unspecified Alternates Performance Number of Speeds Motor Power (kw) Output (kg/hr) Features □ Stainless Steel Bowl □ Tinned Worm & Cylinder □ Floor Mounted □ Includes Knives, Plates etc Meat Capacity (kg): __________ Weight (kg): ___________ Diameter of Plate Holes (mm): __________


166

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: SPIRAL DOUGH MIXER (For 50 kg) Product Code: 150113133_1

DESCRIPTION: Dough mixing technology simulates the action of the baker, mixing and stretching the dough in commercial bakeries. SPECIFICATIONS: This is an electrically powered machine with multiple speeds and a capacity of 50 kg.

SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Pavailler □ Unspecified Alternate CHARACTERISTICS Spiral Motor Power (kw): _____________ Bowl Motor Power (kw): ____________ Number of Speeds: __________ Capacity: Flour (kg): ____________ Dough (kg): ____________ Features of Bowl □ Fixed Bowl □ Bowl Reverse Bowl Volume (l): __________ Height of Bowl Edge (mm): __________


Total Cost [A + F]


□ Catalogue


Comments:


167

Product Characteristics for Unspecified Alternates Power Spiral Motor Power (kw) Bowl Motor Power (kw) Capacity Flour (kg) Dough (kg) Bowl Volume (l): __________ Diameter (mm): __________ Height of Bowl Edge (mm): __________ □ Fixed Bowl □ Bowl Reverse □ Automatic Timer Number of Speeds: Weight: Dimensions Length (cm) Width (cm) Height (cm)


168





Total Cost [A + F]


□ Catalogue


Comments:


169



170



SELECTION MANUFACTURER MODEL □ Preferred Effedue □ Alternate 1 □ Unspecified Alternate CHARACTERISTICS Spiral Motor Power (kw): _____________ Bowl Motor Power (kw): ____________ Number of Speeds: __________ Capacity: Flour (kg): ____________ Dough (kg): ____________ Features of Bowl □ Fixed Bowl □ Bowl Reverse Bowl Volume (l): __________ Height of Bowl Edge (mm): __________


Total Cost [A + F]


□ Catalogue


Comments:


171



172





Total Cost [A + F]


□ Catalogue


Comments:


173



174

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: BLOW MOLDING MACHINE FOR 50 Liters Product Code: 150113135_1

DESCRIPTION: Blow Molding Machines inject air into a tube of plastic, called parison, which is dropped into a mold. The air forces the plastic to expand and conform to the shape of the mold. Applications include the molding of plastic bottles for medicine, beverages and other purposes. SPECIFICATIONS: This is a very flexible machine for making small parts. It has a maximum volume for 50 liters of products.

SELECTION MANUFACTURER MODEL □ Preferred Anaconda-Pleven □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS Closing Force (tonnes): ___________ Maximum Volume of Products (liters): _____________ Production Capacity: for 2 x 1.5 l (pieces/hr): ____________ Main Drive Motor (kw): __________ Heating Power (kw): ____________ Plate Size (_ x _ mm): ____________ Maximum-Minimum Distance between Plates (_ x _ mm): ____________ Number of Plate/Molding Positions: __________


Total Cost [A + F]


□ Catalogue


Comments:


175



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Automa □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS Closing Force (tonnes): ___________ Maximum Volume of Products (liters): _____________ Production Capacity: for 2 x 1.5 l (pieces/hr): ____________ Main Drive Motor (kw): __________ Heating Power (kw): ____________ Plate Size (_ x _ mm): ____________ Maximum-Minimum Distance between Plates (_ x _ mm): ____________ Number of Plate/Molding Positions: __________


Total Cost [A + F]


□ Catalogue


Comments:


176



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Kautex □ Unspecified Alternate CHARACTERISTICS Closing Force (tonnes): ___________ Maximum Volume of Products (liters): _____________ Production Capacity: for 2 x 1.5 l (pieces/hr): ____________ Main Drive Motor (kw): __________ Heating Power (kw): ____________ Plate Size (_ x _ mm): ____________ Maximum-Minimum Distance between Plates (_ x _ mm): ____________ Number of Plate/Molding Positions: __________


Total Cost [A + F]


□ Catalogue


Comments:


177



SELECTION MANUFACTURER MODEL □ Preferred Anaconda-Pleven □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS Closing Force (tonnes): ___________ Maximum Volume of Products (liters): _____________ Production Capacity: for 2 x 1.5 l (pieces/hr): ____________ Main Drive Motor (kw): __________ Heating Power (kw): ____________ Plate Size (_ x _ mm): ____________ Maximum-Minimum Distance between Plates (_ x _ mm): ____________ Number of Plate/Molding Positions: __________


Total Cost [A + F]


□ Catalogue


Comments:


178



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Automa □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS Closing Force (tonnes): ___________ Maximum Volume of Products (liters): _____________ Production Capacity: for 2 x 1.5 l (pieces/hr): ____________ Main Drive Motor (kw): __________ Heating Power (kw): ____________ Plate Size (_ x _ mm): ____________ Maximum-Minimum Distance between Plates (_ x _ mm): ____________ Number of Plate/Molding Positions: __________


Total Cost [A + F]


□ Catalogue


Comments:


179



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Kautex □ Unspecified Alternate CHARACTERISTICS Closing Force (tonnes): ___________ Maximum Volume of Products (liters): _____________ Production Capacity: for 2 x 1.5 l (pieces/hr): ____________ Main Drive Motor (kw): __________ Heating Power (kw): ____________ Plate Size (_ x _ mm): ____________ Maximum-Minimum Distance between Plates (_ x _ mm): ____________ Number of Plate/Molding Positions: __________


Total Cost [A + F]


□ Catalogue


Comments:


180

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: INJECTION MOLDING MACHINE FOR 100 Tonnes Product Code: 150113138_1

DESCRIPTION: Injection Molding Machines heat and inject plastic resins into a mold, which consists of steel plates with cavities to hold the plastic. The cooled plastic takes the shape of the mold, forming precision parts and other complex shapes. Injection molding machines are measured by their clamping force, or the force required by the clamp to keep the mold closed during the injection process. Products made by this process include car bumpers and refrigerator panels. SPECIFICATIONS: The clamping force is 100 tonnes.

SELECTION MANUFACTURER MODEL □ Preferred Mannesman Demag □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Clamping Force (tonnes): ___________ Locking Force (tonnes) Maximum Injection Pressure (bars): ____________ Injection Rate (gm/sec): _____________ Injection Unit Size (International Classification): ____________ Mold Platen Size (_ x _ mm) Mold Height Minimum (mm): ____________ Shot Weight (Polystyrene) (gm): __________ Tie Bar Spacing (mm): __________ Weight without Oil (kg): ___________ Max. Stroke Volume (cc): __________


Total Cost [A + F]


□ Catalogue


Comments:


181



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Negri Bossi □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Clamping Force (tonnes): ___________ Locking Force (tonnes) Maximum Injection Pressure (bars): ____________ Injection Rate (gm/sec): _____________ Injection Unit Size (International Classification): ____________ Mold Platen Size (_ x _ mm) Mold Height Minimum (mm): ____________ Shot Weight (Polystyrene) (gm): __________ Tie Bar Spacing (mm): __________ Weight without Oil (kg): ___________ Max. Stroke Volume (cc): __________


Total Cost [A + F]


□ Catalogue


Comments:


182



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Ferromatic Milacron □ Unspecified Alternate CHARACTERISTICS (For Alternate) Clamping Force (tonnes): ___________ Locking Force (tonnes) Maximum Injection Pressure (bars): ____________ Injection Rate (gm/sec): _____________ Injection Unit Size (International Classification): ____________ Mold Platen Size (_ x _ mm) Mold Height Minimum (mm): ____________ Shot Weight (Polystyrene) (gm): __________ Tie Bar Spacing (mm): __________ Weight without Oil (kg): ___________ Max. Stroke Volume (cc): __________


Total Cost [A + F]


□ Catalogue


Comments:


183

Basic Heading: Special Purpose Machinery Basic Heading Code: 1501131 Product Name: EXTRUDER Product Code: 150113139

DESCRIPTION: Extruders are machines that create a continuous chain of products without interruption, unlike blow or injection molding machines. Extruders can make small plastic parts, for example, the drawer slides of a refrigerator. SPECIFICATIONS: The size of products can vary, for example, 1-2 square inches.

SELECTION MANUFACTURER MODEL □ Preferred Demag □ Unspecified Alternate CHARACTERISTICS Plate Size (mm): ____________ Closing Force (tonnes): ___________ Pressure (bars): ____________ Maximum Pieces per Hour at Maximum Capacity: ____________


Total Cost [A + F]


□ Catalogue


Comments:


184

Basic Heading: Special Purpose Machinery_2 Basic Heading Code: 1501133 Product Name: COMPACT TRACTOR Product Code: 150113301_1

DESCRIPTION: Compact Tractors are typically derived from automotive and light truck/van drivetrain and powertrain components packaged in proprietary castings and weldments. They are a source of power and transport for an operator and implements used in small agricultural operations globally. SPECIFICATIONS: The power range is generally 18 to 37.5 kW. High-specification tractors can have mechanical front drive (MFD). These tractors are generally equipped with an open operator roll over protective structure (ROPS).

SELECTION MANUFACTURER MODEL □ Preferred Kubota 4800 □ Alternate 1 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): ____________ Weight (kg): _____________ □ Open ROPS


Total Cost [A + F]


□ Catalogue


Comments:

Product Characteristics for Unspecified Alternates: Engine Weight


185

Fuel Type Shipping Weight(kg) Gross Power (kW) Operating Wt (kg) Power Take Off Power (kW)

Max. Operating Wt (kg)

Emission Cert. Stage Hitch System (Three Point) Front Category: __________ Rear lift capacity (kg): __________ Front Lift capacity (kg): __________ □ Position Control □ Front Position Control □ Draft Control □ Front Draft Control □ Position/Draft Mix Rear Category: __________ Power Take Off (PTO) □ Front □ Rear □ Speed □ Speed □ Live □ Live □ Independent □ Independent □ Hydrostatic □ Hydrostatic Drivetrain □ Hydrostatic □ Powershift □ Constantly Variable (CVT) Forward Speeds: __________ □ Mechanical Transmission Reverse Speeds: __________ Forward Speeds: __________ Reverse Speeds: __________ Minimum Speed (kph): __________ □ Sliding gear change Maximum Speed (kph): __________ □ Synchromesh Operator Station □ Cab/ROPS □ Open/ROPS □ Suspension □ Suspended seat

□ Suspended seat □ Adjustable seat □ Instructor seat □ FOPS □ FOPS □ Sun shield

□ Air conditioning □ Air filtration □ Adjustable steering wheel □ Adjustable control pod □ Windscreen demister □ Windscreen wiper □ Windscreen washer □ Rear view mirror □ Interior □ Exterior Operator Control □ Mechanical steering □ Mechanical shift □ Hydrostatic steering □ Hydraulic shift □ Assisted power steering □ Electro-hydraulic shift □ Mechanical brakes □ Mechanical lift controls □ Hydraulic brakes □ Hydraulic lift controls □ Boosted brakes □ Remote hitch controls


186

Basic Heading: Special Purpose Machinery_2 Basic Heading Code: 1501133 Product Name: COMPACT TRACTOR Product Code: 150113301_2

DESCRIPTION: Compact Tractors are typically derived from automotive and light truck/van drivetrain and powertrain components packaged in proprietary castings and weldments. They are a source of power and transport for an operator and implements used in small agricultural operations globally. SPECIFICATIONS: The power range is generally 18 to 37.5 kW. High-specification tractors can have mechanical front drive (MFD). These tractors are generally equipped with an open operator roll over protective structure (ROPS).

SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Mahindra 6000 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): ____________ Weight (kg): _____________ □ Open ROPS


Total Cost [A + F]


□ Catalogue


Comments:

Product Characteristics for Unspecified Alternates: Engine Weight


187

Fuel Type Shipping Weight(kg) Gross Power (kW) Operating Wt (kg) Power Take Off Power (kW)


Emission Cert. Stage Hitch System (Three Point) Front Category: __________ Rear lift capacity (kg): __________ Front Lift capacity (kg): __________ □ Position Control □ Front Position Control □ Draft Control □ Front Draft Control □ Position/Draft Mix Rear Category: __________ Power Take Off (PTO) □ Front □ Rear □ Speed □ Speed □ Live □ Live □ Independent □ Independent □ Hydrostatic □ Hydrostatic Drivetrain □ Hydrostatic □ Powershift □ Constantly Variable (CVT) Forward Speeds: __________ □ Mechanical Transmission Reverse Speeds: __________ Forward Speeds: __________ Reverse Speeds: __________ Minimum Speed (kph): __________ □ Sliding gear change Maximum Speed (kph): __________ □ Synchromesh Operator Station □ Cab/ROPS □ Open/ROPS □ Suspension □ Suspended seat

□ Suspended seat □ Adjustable seat □ Instructor seat □ FOPS □ FOPS □ Sun shield

□ Air conditioning □ Air filtration □ Adjustable steering wheel □ Adjustable control pod □ Windscreen demister □ Windscreen wiper □ Windscreen washer □ Rear view mirror □ Interior □ Exterior Operator Control □ Mechanical steering □ Mechanical shift □ Hydrostatic steering □ Hydraulic shift □ Assisted power steering □ Electro-hydraulic shift □ Mechanical brakes □ Mechanical lift controls □ Hydraulic brakes □ Hydraulic lift controls □ Boosted brakes □ Remote hitch controls


188

Basic Heading: Special Purpose Machinery_2 Basic Heading Code: 1501133 Product Name: UTILITY TRACTOR Product Code: 150113302_1

DESCRIPTION: Utility Tractors are purpose-built for a flexible variety of agricultural operators globally. It can be a support tractor on larger farms or a primary tractor on farms ranging from 40 to 100 hectares. This category of tractor configuration will range from basic two-wheel-drive power (2WD) to mechanical front-wheel-drive with cab, multiple PTOs and hitches. High specification tractors in this category can also have GPS and on-board micro-processors. The basic configuration dates from the 1939 Ford tractor with Ferguson system. SPECIFICATIONS: Diesel engine power ranges from 37.5 to 75 kW and the configuration is two-wheel drive with open roll over protective structure (ROPS).

SELECTION MANUFACTURER MODEL □ Preferred Kubota M6800 □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): ____________ Weight (kg): _____________ □ Open ROPS □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments: Product Characteristics for Unspecified Alternates: Engine Weight Fuel Type Shipping Weight(kg) Gross Power (kW) Operating Wt (kg) Power Take Off Power Max. Operating Wt (kg)


189

(kW) Emission Cert. Stage Hitch System (Three Point) Front Category: __________ Rear Category: __________ Front Lift Capacity (kg): __________ Rear Lift Capacity (kg): __________ □ Front Position Control □ Position Control □ Front Draft Control □ Draft Control □ Position/Draft Mix Drawbar System □ Fixed □ Italian (pintle) □ Swinging □ French (piton fixe) □ German (pintle) □ UK (auto hitch) Power Take Off (PTO) □ Front □ Rear

□ Speed □ Speed □ Live □ Live □ Independent □ Independent □ Hydrostatic □ Hydrostatic

Drivetrain □ Hydrostatic □ Powershift □ Constantly Variable (CVT) Forward Speeds: __________ □ Mechanical Transmission Reverse Speeds: __________ Forward Speeds: __________ Reverse Speeds: __________ Minimum Speed (kph): __________ □ Sliding Gear Change Maximum Speed (kph): __________ □ Synchromesh Operator Station □ Cab/ROPS □ Open/ROPS □ Suspension □ Suspended seat

□ Suspended seat □ Adjustable seat □ Instructor seat □ FOPS □ FOPS □ Sun Shield

□ Air conditioning □ Air filtration □ Adjustable steering wheel □ Adjustable control pod □ Windscreen demister □ Windscreen wiper □ Windscreen washer □ Rear view mirror □ Interior □ Exterior Operator Control □ Mechanical Steering □ Mechanical Shift □ Hydrostatic Steering □ Hydraulic Shift □ Assisted Power Steering □ Electro-Hydraulic Shift □ Mechanical Brakes □ Mechanical Lift Controls □ Hydraulic Brakes □ Hydraulic Lift Controls □ Boosted Brakes □ Remote Hitch Controls


190



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Massey-Ferguson MF471 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): ____________ Weight (kg): _____________ □ Open ROPS □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments: Product Characteristics for Unspecified Alternates: Engine Weight Fuel Type Shipping Weight(kg) Gross Power (kW) Operating Wt (kg)


191

Power Take Off Power (kW)


Emission Cert. Stage Hitch System (Three Point) Front Category: __________ Rear Category: __________ Front Lift Capacity (kg): __________ Rear Lift Capacity (kg): __________ □ Front Position Control □ Position Control □ Front Draft Control □ Draft Control □ Position/Draft Mix Drawbar System □ Fixed □ Italian (pintle) □ Swinging □ French (piton fixe) □ German (pintle) □ UK (auto hitch) Power Take Off (PTO) □ Front □ Rear






192



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Mahindra 7520 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): ____________ Weight (kg): _____________ □ Open ROPS □ Closed ROPS


Total Cost [A + F]


□ Catalogue


Comments: Product Characteristics for Unspecified Alternates: Engine Weight Fuel Type Shipping Weight(kg) Gross Power (kW) Operating Wt (kg)


193

Power Take Off Power (kW)


Emission Cert. Stage Hitch System (Three Point) Front Category: __________ Rear Category: __________ Front Lift Capacity (kg): __________ Rear Lift Capacity (kg): __________ □ Front Position Control □ Position Control □ Front Draft Control □ Draft Control □ Position/Draft Mix Drawbar System □ Fixed □ Italian (pintle) □ Swinging □ French (piton fixe) □ German (pintle) □ UK (auto hitch) Power Take Off (PTO) □ Front □ Rear






194

Basic Heading: Special Purpose Machinery_2 Basic Heading Code: 1501133 Product Name: POWER CIRCULAR SAW Product Code: 150113304

DESCRIPTION: Power Circular Saws are hand-held and guide power tools for cutting a variety of materials. SPECIFICATIONS: They are generally used to saw wood products, but can be adapted with special circular blades to cut concrete, granite, plastic, steel, and non-ferrous structural or sheeting products. Engines are electrically driven. A special adaptation can be used to wet-cut ceramic tile. The saws are adjustable up to 45° bevel cuts with a capacity to cut to up to a 1” board. They have 15 amp motor at 110 volts. The blade is 180 millimeters.

SELECTION MANUFACTURER MODEL □ Preferred Makita 5007FK □ Unspecified Alternate CHARACTERISTICS (For Alternate) Amperage: ____________ Voltage: ___________ Blade Diameter: ___________ Bevel Cut Range: ___________ Capacity (mm of material thickness): _______________


Total Cost [A + F]


□ Catalogue


Comments:


195

Basic Heading: Special Purpose Machinery_2 Basic Heading Code: 1501133 Product Name: POWER HAND DRILL Product Code: 150113305

DESCRIPTION: Power Hand Drills are typically used for producing holes in a variety of materials. SPECIFICATIONS: This tool uses appropriate drilling bits for specific materials such as wood, composite, plastic, steel, iron, aluminum, and granite. Typically has ½” key chuck with 8 amps at 120 volts and is reversible. It has variable speeds ranging from 0 to850 rpm.

SELECTION MANUFACTURER MODEL □ Preferred Milwaukee 0300-20 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Key Chuck: _______________ □ Variable Speed Amperage: ________________ Voltage: ____________


Total Cost [A + F]


□ Catalogue


Comments:


196

Basic Heading: Special Purpose Machinery_2 Basic Heading Code: 1501133 Product Name: GRINDER (Power Hand Held) Product Code: 150113306_1

DESCRIPTION: Grinders are used to shape, cut, and smooth work. SPECIFICATIONS: This tool can be air or electrically powered. Several disc, stone, and wire brush attachments are part of the repertoire of flexible tools available for these devices. It is typically between 10 and 12 amp at 120 volts or 5 to 6 amps at 240 volts. Disk diameter is typically between 100 to 150 millimeters.

SELECTION MANUFACTURER MODEL □ Preferred DeWalt DW402K □ Alternate 1 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Blade Diameter (mm): ____________ □ Variable Speed Power (watts): _______________


Total Cost [A + F]


□ Catalogue


Comments:


197

Basic Heading: Special Purpose Machinery_2 Basic Heading Code: 1501133 Product Name: GRINDER (Power Hand Held) Product Code: 150113306_2

DESCRIPTION: Grinders are used to shape, cut, and smooth work. SPECIFICATIONS: This tool can be air or electrically powered. Several disc, stone, and wire brush attachments are part of the repertoire of flexible tools available for these devices. It is typically between 10 and 12 amp at 120 volts or 5 to 6 amps at 240 volts. Disk diameter is typically between 100 to 150 millimeters.

SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Milwaukee 5460-6 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Blade Diameter (mm): ____________ □ Variable Speed Power (watts): _______________


Total Cost [A + F]


□ Catalogue


Comments:


198

Basic Heading: Special Purpose Machinery_2 Basic Heading Code: 1501133 Product Name: ROUTER Product Code: 150113307

DESCRIPTION: A Router is a flexible tool for wood and composite work where joints and creative patterns are desired in the finished piece of work. Larger routers are often mounted to a fixed surface and used as a shaper. Routers are generally categorized by power and tool chuck diameter. Variable-speed routers have greater value because tool diameter and work piece variables can be accounted for in optimizing finish quality. SPECIFICATIONS: This tool is typically 2 ¼ horsepower, 12 amp, and 110 volts. It has variable speeds ranging from 8 to 25,000 rpm. It provides ¼” and ½” self-releasing collets.

SELECTION MANUFACTURER MODEL □ Preferred Bosch 1617EVS □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (hp): ____________ Amperage: _____________ Speed (rpm): ___________


Total Cost [A + F]


□ Catalogue


Comments:


199

Basic Heading: Special Purpose Machinery_2 Basic Heading Code: 1501133 Product Name: SANDER (Hand/Palm) Product Code: 150113308

DESCRIPTION: Power hand Sanders are used for smoothing surfaces and removing damaged or unwanted finishes on a variety of materials from wood to metal. There are 3 basic types: orbital, rotating disc, and moving continuous belt. Orbital sanders provide smooth finishes, whereas disc and belt sanders are aggressive and useful for removing material quickly. SPECIFICATIONS: The Sander has a 2-amp ball bearing motor and 14,000 orbits per minute (opm). It has a dust collector and ¼ sheet replaceable sanding paper.

SELECTION MANUFACTURER MODEL □ Preferred Porter Cable 340K □ Unspecified Alternate CHARACTERISTICS (For Alternate) Amperage: ____________ OPM: _____________ Sanding Paper: __________


Total Cost [A + F]


□ Catalogue


Comments:


200

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: DIGITAL PROJECTOR Product Code: 150114103_1

DESCRIPTION: These projectors are used to produce and project multimedia presentations with (and in some cases, without) the aid of a notebook/desktop computer — and without the hassle of transparencies. SPECIFICATIONS: A typical Digital Multimedia Projector has either LCD/DLP technology, SVGA+ resolution, 800+ lumens, 400+ contrast, and beta computer (VGA) and ANIS inputs.

SELECTION MANUFACTURER MODEL □ Preferred NEC □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Brightness/Illumination (lumens): _____________ Lamp Life (hours): ______________ Maximum Resolution (pixels): _______________


Total Cost [A + F]


□ Catalogue


Comments: Product Characteristics for Unspecified Alternates:


201

Dimensions Height (cm) Width (cm) Depth (cm) Weight (kg) Display Type □ XGA (Resolution 1024 x 768) □ SXGA (Resolution 1365 x 1024) □ UXGA (Resolution 1600 x 1200) □ SVGA (Resolution 800 x 600) □ VGA (Resolution 640 x 480) Audio Output □ Mono □ Stereo □ Other: _________________ Lamp & Power Consumption Brightness (lumens) Lamp Type (watts) Lamp Life (hours) Technology □ LCD □ DLP □ LCO(S) Other: _____________ Screen Max. Resolution (pixels, e.g. 800x600)

Viewable Screen Size (Diagonal – 40 to 300 inches)

Contrast Ratio Compatibility □ XGA □ HDMI □ SVGA □ SVGA+ (resized) □ PC □ Mac □ NTSC/PAL/SECAM □ VGA □ EDTV (480p) □ SDTV (480i) □ HDTV (720p, 1080i) Technical Specifications Vertical Frequency Range (Hz)

Horizontal Frequency Range (Hz)

Power Consumption (Watts)

Other Features □ Onscreen Image Controls □ Digital Keystone Correction □ Remote Control Included □ Lens Shift Number of Language Options Available: __________________ Zoom/Focus Control: __________________ Voltage Requirement (+ or – 5V): __________________ Warranty Parts (months) Labor (months)


202



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 InFocus □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Brightness/Illumination (lumens): _____________ Lamp Life (hours): ______________ Maximum Resolution (pixels): _______________


Total Cost [A + F]


□ Catalogue




203








204



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Sharp □ Unspecified Alternate CHARACTERISTICS (For Alternate) Brightness/Illumination (lumens): _____________ Lamp Life (hours): ______________ Maximum Resolution (pixels): _______________


Total Cost [A + F]


□ Catalogue




205








206

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: OVERHEAD PROJECTOR Product Code: 150114104

DESCRIPTION: Overhead Projectors are low-cost alternatives to digital multimedia projectors. They make use of overhead transparencies and do not require a computer to project. SPECIFICATIONS: A basic tabletop Overhead Projector supports projections of documents that are at least 10 x 10 inches in size, and has an illumination of at least 2,000 lumens. The lamp life will be 75 hours-plus, and the lamp is usually halide, EVD, halogen or fluorescent.

SELECTION MANUFACTURER MODEL □ Preferred 3M 1750 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Brightness/Illumination (lumens): _____________ Lamp Life (hours): ______________ Image Size – Diagonal (cm): _______________


Total Cost [A + F]


□ Catalogue


Comments:


207

Product Characteristics for Unspecified Alternates: Lamp Lamp Type: ________________ Lamp Life (hours): _______________ Brightness/Illumination (lumens): ___________ □ Lamp Ejector □ Lamp Changer Included Display Magnification Projection Distance (m) Image Size -Diagonal (cm)

Tilting Angle Adjustment

Projection Lens Size


208

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: PAPER SHREDDER Product Code: 150114105

DESCRIPTION: Paper Shredders are used to destroy low volumes of paper documents in the most confidential and convenient way possible. A cross-cut shredder offers more security than a straight-cut shredder. SPECIFICATIONS: Business Paper Shredders typically include a 9-inch throat width for all standard-size documents. Their performance includes at least six sheets per pass. Key features are cycle time to prevent overheating, and manual reverse to prevent jamming. Overload protection is also available.

SELECTION MANUFACTURER MODEL □ Preferred Xerox □ Unspecified Alternate CHARACTERISTICS (For Alternate) Throat Width (inches): ____________ Number of sheets per pass: _____________ Maximum Document Size: ___________ Features: □ Cycle Time □ Manual Reverse Other: ____________________________________________________________


Total Cost [A + F]


□ Catalogue


Comments:


209

Product Characteristics for Unspecified Alternates:

Dimensions Height (cm) Width (cm) Depth (cm) Weight (kg) No. of Sheets to Shred at One Pass: _________________ Maximum Throat Width (mm): _________________ Receptacle/Basket Capacity (liters): _________________ Shredding Style □ Straight-cut □ Cross-cut □ Confetti-cut Materials Accepted □ Paper □ Credit Cards □ CDs □ DVDs Technical Specifications Power Options Reverse Options Maximum Operating Volume (in dB)

Warranty Parts (months) Labor (months)


210

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: DESKTOP COMPUTER - COMPAQ Product Code: 150114106

DESCRIPTION: Desktop Computers handle basic computing needs such as e-mail, surfing the Internet, working on spreadsheets, text documents and other productivity software. They can be used for office or home computing needs. SPECIFICATIONS: The Compaq desktop computer is equipped with 512 MB of memory, a 60 - 80 GB hard disc, and an Intel Pentium 4 chip of 2.5 - 2.8 GHz. The graphics card is 128 MB, and the optical device is a CD-RW/DVD-ROM combo. This is a computer package that includes a standard keyboard and mouse, CPU, integrated modem and Microsoft Windows XP home edition. It features USB/firewire ports. The computer packages EXCLUDES speakers, external modem, monitor, scanner, printer and other accessories.

SELECTION MANUFACTURER MODEL □ Preferred Compaq □ Unspecified Alternate CHARACTERISTICS (For Alternate) Memory (MB): ____________ Hard Disc (GB): _____________ Processor Brand: _____________ Processor Speed (GHz): ____________ Graphics Card (MB): ___________


Total Cost [A + F]


□ Catalogue


Comments:


211


Processor Processor Brand System Bus (MHz) Processor Speed (MHz or GHz)

Memory Cache Memory (MB) Memory Type System Memory, (RAM) (in MB/GB)

Video Memory (Size, in MB)

System Memory (RAM) Expandable to (Size, in MB): __________

Hard Drive Type (IDE, SCSI, SATA): _______________ Size (GB): _____________________ Multimedia □ CD Drive □ DVD Drive Type: __________ Type: __________ Speed: __________ Speed: __________ □ Speakers □ Audio Type: __________ Type: __________ □ Digital Media Slot □ Modem Type: __________ Type: __________ □ Graphics Card □ Floppy Drive Type: __________


212

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: DESKTOP COMPUTER - DELL Product Code: 150114107

DESCRIPTION: Desktop Computers handle basic computing needs such as e-mail, surfing the Internet, working on spreadsheets, text documents and other productivity software. They can be used for office or home computing needs. SPECIFICATIONS: The Dell desktop computer is equipped with 512 MB of memory, a 60 - 80 GB hard disc, and an Intel Pentium 4 chip of 2.5 - 2.8 GHz. The graphics card is 128 MB, and the optical device is a CD-RW/DVD-ROM combo. This is a computer package that includes a standard keyboard and mouse, CPU, integrated modem and Microsoft Windows XP home edition. It features USB/firewire ports. The computer packages EXCLUDES speakers, external modem, monitor, scanner, printer and other accessories.

SELECTION MANUFACTURER MODEL □ Preferred Dell □ Unspecified Alternate CHARACTERISTICS (For Alternate) Memory (MB): ____________ Hard Disc (GB): _____________ Processor Brand: _____________ Processor Speed (GHz): ____________ Graphics Card (MB): ___________


Total Cost [A + F]


□ Catalogue


Comments:

http://www1.us.dell.com/content/products/RBIredirect.aspx?rbi=GKiitGAbBa2SB+6V9bxpRyvwm4g6Tn36wTwLVrus+1Yk1iSYlI8tpShc0L6a76U+CVUTEeEnm6xQpNCns44qZFidtXsHwDEzTJPVzuwA8Ko2q69U1kTgVDCDLEMQVJnKzaarQbkScLn/ceCwLUVs+w==�


213

Product Characteristics for Unspecified Alternates: Processor Processor Brand System Bus (MHz) Processor Speed (MHz or GHz)

Memory Cache Memory (MB) Memory Type System Memory, (RAM) (in MB/GB)

Video Memory (Size, in MB)

System Memory (RAM) Expandable to (Size, in MB): __________

Hard Drive Type (IDE, SCSI, SATA): _______________ Size (GB): _____________________ Multimedia □ CD Drive □ DVD Drive Type: __________ Type: __________ Speed: __________ Speed: __________ □ Speakers □ Audio Type: __________ Type: __________ □ Digital Media Slot □ Modem Type: __________ Type: __________ □ Graphics Card □ Floppy Drive Type: __________ Size (MB): __________


214

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: LAPTOP COMPUTER Product Code: 150114108

DESCRIPTION: Laptop Computers handle basic computing needs such as e-mail, surfing the Internet, working on spreadsheets, text documents and other productivity software. They are portable and have battery capability where electric power is not available. They can be used for office or home computing needs. SPECIFICATIONS: The laptop computer is equipped with 512 MB of memory, a 60-GB hard disc, and an Intel Pentium Centrino chip of 1.5 – 2 GHz. The screen size is approximately 15 inches, and the display is either CRT or LCD. Other item features are a CD burner, Microsoft Windows XP home edition and Wireless Network Connection.

SELECTION MANUFACTURER MODEL □ Preferred Dell □ Unspecified Alternate CHARACTERISTICS (For Alternate) Memory (MB): ____________ Hard Disc (GB): _____________ Processor Brand: _____________ Processor Speed (GHz): ____________ Screen Size (inches): ____________ Display: □ CRT □ LCD


Total Cost [A + F]


□ Catalogue


Comments:


215

Product Characteristics for Unspecified Alternates: Display Screen Size (inches): ____________ Display Type: □ XGA □ SXGA □ UXGA □ Other: __________ Processor Processor Brand System Bus Processor Speed (MHz/GHz)

Memory Cache Memory (MB) Memory Type System Memory (RAM) (in MB or GB)

Video Memory Size (MB)

System Memory (RAM) Expandable to __________(MB/GB)

Hard Drive Type: __________________________ Size (GB): _______________________ Multi-Media □ CD Drive □ Speakers Type/Speed: _______________ Type: __________________ □ DVD Drive □ Audio Type/Speed: _______________ Type: __________________ □ Digital Media Slot □ Modem Type: ________________ Type: ___________________ □ Floppy Drive □ PCMCIA Slots Type: ___________________ □ CD Burner Operating System □ Windows XP Professional □ Windows XP Home □ Windows 2000 □ Windows 98 or Older □ Mac OS Other: ____________________ Networking □ Ethernet □ Wireless Network Connection Other: _______________


216

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: LASER PRINTER Product Code: 150114110_1

DESCRIPTION: Laser Printers are used for printing large volumes of high-quality black-and-white text. Color laser printers are ideal for businesses that produce a large volume of color prints and want to save on outsourcing their color printing. Laser printers are a must-have for offices that do a lot of printing and are ideal for many users to share over a network. SPECIFICATIONS: The printing speed for best-quality printing, in either color or black, is 12 pages per minute. Installed memory (RAM) is 64 MB. Standard input capacity is 350 sheets, while the maximum is 850 sheets. The print quality for both color and black printing is true 600 x 600 dpi. Monthly duty cycle is about 45,000 pages. Installed RAM is 64 MB. Standard connectivity is with a USB interface.

SELECTION MANUFACTURER MODEL □ Preferred HP Color LaserJet 3500 (Q1319A) □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Printing Speed – Color (ppm): ____________ Printing Speed – Color (ppm): ____________ Max. Resolution – Color (dpi): _____________ Max. Resolution – Color (dpi): _____________ Monthly Duty Cycle (pages): _____________ RAM (MB): ______________


Total Cost [A + F]


□ Catalogue


Comments:


217

Product Characteristics for Unspecified Alternates: Printing Color □ Black □ Color Print Speed Black (pages per min) Color (pages per min) Resolution Black Print (dpi) Color Print (dpi) Memory (RAM): ____________________ Media/Paper Size □ Letter □ B5 □ Legal □ Half-letter □ A4 □ A5 □ A6 □ Executive □ User-Defined: _______________ Paper Capacity Input Paper Capacity (No. of Sheets): _____________ Output Paper Capacity (No. of Sheets): ____________ Interface Type Parallel USB Firewire Wireless Other Ink Tanks/ Cartridge □ Toner □ Color Ink Cartridge □ Black Cartridge □ Other: ____________ Dimensions Length (cm) Width (cm) Height (cm) Weight (kg) Networking Capabilities □ Ethernet □ Wireless □ USB □ Other: _______________ Other Features □ Two Sided Print Memory Size (MB): _________________ Accessories Included: ______________________________ Software Included: _______________________________ Voltage Required (+ or – 5V): ______________________________ Warranty Parts (months) Labor (months)


218



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Xerox □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Printing Speed – Color (ppm): ____________ Printing Speed – Color (ppm): ____________ Max. Resolution – Color (dpi): _____________ Max. Resolution – Color (dpi): _____________ Monthly Duty Cycle (pages): _____________ RAM (MB): ______________


Total Cost [A + F]


□ Catalogue


Comments:


219



220



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Epson □ Unspecified Alternate CHARACTERISTICS (For Alternate) Printing Speed – Color (ppm): ____________ Printing Speed – Color (ppm): ____________ Max. Resolution – Color (dpi): _____________ Max. Resolution – Color (dpi): _____________ Monthly Duty Cycle (pages): _____________ RAM (MB): ______________


Total Cost [A + F]


□ Catalogue


Comments:


221



222

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: MULTIFUNCTION PRINTER Product Code: 150114111_1

DESCRIPTION: Multifunction Printers combine several functions (printing, faxing, scanning, copying and, in some cases, PC faxing) in one machine. They save space and are more affordable than buying separate machines. SPECIFICATIONS: This printer has printing, copying and scanning capabilities.

A. Printer Specifications: Printing speed in three quality modes – draft, normal and best. Normal quality mode for black printing is up to 7 ppm, while for color printing it is up to 5 ppm. The monthly duty cycle is up to 1,000 pages. Standard memory is 8 MB. Standard connectivity is with USB interface.

B. Copier Specifications: Copying speed up to 20 ppm in black ink, and up to 18 ppm in color ink. Copy resolution is up to 600 dpi for black, and up to 4,800 for color.

C. Scanner Specifications: A flatbed scanner with scan resolution of up to 19,200 dpi. Maximum scan size is 8.5 x 11.7 inches, and bit depth is 48-bit.

SELECTION MANUFACTURER MODEL □ Preferred HP 1510 □ Alternate 1 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Printer: Printing Speed – Color, normal quality (ppm): ____________ Printing Speed – Black, normal quality (ppm): ____________ Monthly Duty Cycle (pages): _____________ RAM (MB): ______________ Copier: Copying Speed – Color (ppm): ____________ Copying Speed – Black (ppm): ____________ Max. Resolution – Color (dpi): ____________ Max. Resolution – Black (dpi): ____________ Scanner: Max. Resolution (dpi): _____________ Max. Scan Size ( _ x _ inches): ____________


Total Cost [A + F]


223


□ Catalogue


Comments:

Product Characteristics for Unspecified Alternates: Function □ Scanner □ Copier □ Printer □ Fax Scanner Type □ Flatbed □ Sheet fed □ Other: ___________________ Resolution (dpi): ___________________ Copier Resolution (dpi) Reduction/ Enlargement

(%)

Speed (Color) (ppm) Speed (B&W) (ppm) Automatic Document Reduction (Yes/No)

Automatic Document Feeder (# of Pages)

Fax Transmission Speed (ppm)

Fax Type

Fax Memory (ppm) No. of Speed Dials Automatic Redial (Yes/No)

Document Feed: Type & Capacity

Modem Speed (bps): □ 9,600 □ 14,400 □ 33,600 □ Other: ____________ Printer Speed (Color) (ppm) Speed (B&W) (ppm) Media/Paper Size □ Letter □ Legal □ A4 □ A5


224

□ A6 □ B5 □ Half-letter □ Executive □ User-Defined: _________________ Interface Type Parallel USB Firewire Wireless Other Ink Tanks/Cartridge Tri-color Photo ink Black Color Other Features □ Photo Quality □ Two Sided Print Networking Capabilities □ Ethernet □ Wireless □ USB □ Other: _______________ Paper Capacity Input Paper Capacity (sheets): __________ Output Paper Capacity (sheets): __________ Software Included: _____________________________________________ Memory Size (MB): _____________________ Voltage Requirement (+ or – 5V): ________________ Warranty Parts (months) Labor (months)


225

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: MULTIFUNCTION PRINTER Product Code: 150114111_2

DESCRIPTION: Multifunction Printers combine several functions (printing, faxing, scanning, copying and, in some cases, PC faxing) in one machine. They save space and are more affordable than buying separate machines. SPECIFICATIONS: This printer has printing, copying and scanning capabilities.

A. Printer Specifications: Printing speed in three quality modes – draft, normal and best. Normal quality mode for black printing is up to 7 ppm, while for color printing it is up to 5 ppm. The monthly duty cycle is up to 1,000 pages. Standard memory is 8 MB. Standard connectivity is with USB interface.

B. Copier Specifications: Copying speed up to 20 ppm in black ink, and up to 18 ppm in color ink. Copy resolution is up to 600 dpi for black, and up to 4,800 for color.

C. Scanner Specifications: A flatbed scanner with scan resolution of up to 19,200 dpi. Maximum scan size is 8.5 x 11.7 inches, and bit depth is 48-bit.

SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Epson □ Unspecified Alternate CHARACTERISTICS (For Alternate) Printer: Printing Speed – Color, normal quality (ppm): ____________ Printing Speed – Black, normal quality (ppm): ____________ Monthly Duty Cycle (pages): _____________ RAM (MB): ______________ Copier: Copying Speed – Color (ppm): ____________ Copying Speed – Black (ppm): ____________ Max. Resolution – Color (dpi): ____________ Max. Resolution – Black (dpi): ____________ Scanner: Max. Resolution (dpi): _____________ Max. Scan Size ( _ x _ inches): ____________


Total Cost [A + F]


226


□ Catalogue


Comments:

Product Characteristics for Unspecified Alternates: Function □ Scanner □ Copier □ Printer □ Fax Scanner Type □ Flatbed □ Sheet fed □ Other: ___________________ Resolution (dpi): ___________________ Copier Resolution (dpi) Reduction/ Enlargement

(%)

Speed (Color) (ppm) Speed (B&W) (ppm) Automatic Document Reduction (Yes/No)

Automatic Document Feeder (# of Pages)

Fax Transmission Speed (ppm)

Fax Type

Fax Memory (ppm) No. of Speed Dials Automatic Redial (Yes/No)

Document Feed: Type & Capacity

Modem Speed (bps): □ 9,600 □ 14,400 □ 33,600 □ Other: ____________ Printer Speed (Color) (ppm) Speed (B&W) (ppm) Media/Paper Size □ Letter □ Legal □ A4 □ A5 □ A6 □ B5


227

□ Half-letter □ Executive □ User-Defined: _________________ Interface Type Parallel USB Firewire Wireless Other Ink Tanks/Cartridge Tri-color Photo ink Black Color Other Features □ Photo Quality □ Two Sided Print Networking Capabilities □ Ethernet □ Wireless □ USB □ Other: _______________ Paper Capacity Input Paper Capacity (sheets): __________ Output Paper Capacity (sheets): __________ Software Included: _____________________________________________ Memory Size (MB): _____________________ Voltage Requirement (+ or – 5V): ________________ Warranty Parts (months) Labor (months)


228

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: PDA (PERSONAL DIGITAL ASSISTANT) Product Code: 150114112_1

DESCRIPTION: PDAs are used for managing and storing personal information: names and addresses, phone numbers, email addresses, to-do lists, tasks, appointments (calendar and alarm reminders), project plans, personal expenses, etc. If fitted with a modem, they are also ideal for performing online tasks, such as receiving email and downloading the latest news. Advanced models support a wide range software applications and Microsoft applications such as Excel® and Word®. SPECIFICATIONS: This PDA uses an Intel PXA270 processor of 520MHz. Installed memory is 64 MB. Display size is approximately 3.5 inches, with 16-bit color and transflective TFT active matrix. Hardware platform is the PC. It is powered by a rechargeable 1400 mAh Lithium-Ion battery. The PDA weighs approximately 650 grams.

SELECTION MANUFACTURER MODEL □ Preferred HP iPAQ 2495 □ Alternate 1 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Processor Brand: _____________ Processor Speed (GHz): ____________ Memory (MB): ____________ Battery Type: _____________ Display (Screen) Size (inches): ____________ Display Type: _____________ Weight (grams):


Total Cost [A + F]


□ Catalogue


Comments:

http://www.amazon.com/gp/product/images/B000AR7QXW/ref=dp_primary-product-display_0/104-4295049-4209562?_encoding=UTF8&n=507846&s=electronics�


229

Product Characteristics for Unspecified Alternates: Product Dimensions Height (mm) Length (mm) Width (mm) Weight (g) System Functions □ Calculator □ Address Book □ Spreadsheet □ Word Processor □ E-Mail □ Internet Browser □ Other: _______________________ Display □ 160 x 160 □ 320 x 320 □ 320 x 480 Connection Port □ USB Port □ Infrared □ Wireless □ Other: _______________________ Features □ Stereo Microphone Jack □ Screen Rotation □ Expansion Card Slot □ Voice Memo (Recorder) □ Camera Data Entry □ Keyboard □ Stylus/ Pen Entry □ Other: _______________________ Memory (MB): ________________________________ Battery Type: ____________________________________ Operating System: _________________________________ Software Included: __________________________________ Accessories Included: ________________________________ Warranty Parts (months) Labor (months)


230

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: PDA (PERSONAL DIGITAL ASSISTANT) Product Code: 150114112_2

DESCRIPTION: PDAs are used for managing and storing personal information: names and addresses, phone numbers, email addresses, to-do lists, tasks, appointments (calendar and alarm reminders), project plans, personal expenses, etc. If fitted with a modem, they are also ideal for performing online tasks, such as receiving email and downloading the latest news. Advanced models support a wide range software applications and Microsoft applications such as Excel® and Word®. SPECIFICATIONS: This PDA uses an Intel PXA270 processor of 520MHz. Installed memory is 64 MB. Display size is approximately 3.5 inches, with 16-bit color and transflective TFT active matrix. Hardware platform is the PC. It is powered by a rechargeable 1400 mAh Lithium-Ion battery. The PDA weighs approximately 650 grams.

SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 PalmOne □ Unspecified Alternate CHARACTERISTICS (For Alternate) Processor Brand: _____________ Processor Speed (GHz): ____________ Memory (MB): ____________ Battery Type: _____________ Display (Screen) Size (inches): ____________ Display Type: _____________ Weight (grams):


Total Cost [A + F]


□ Catalogue


Comments:

http://www.amazon.com/gp/product/images/B000AR7QXW/ref=dp_primary-product-display_0/104-4295049-4209562?_encoding=UTF8&n=507846&s=electronics�


231

Product Characteristics for Unspecified Alternates: Product Dimensions Height (mm) Length (mm) Width (mm) Weight (g) System Functions □ Calculator □ Address Book □ Spreadsheet □ Word Processor □ E-Mail □ Internet Browser □ Other: _______________________ Display □ 160 x 160 □ 320 x 320 □ 320 x 480 Connection Port □ USB Port □ Infrared □ Wireless □ Other: _______________________ Features □ Stereo Microphone Jack □ Screen Rotation □ Expansion Card Slot □ Voice Memo (Recorder) □ Camera Data Entry □ Keyboard □ Stylus/ Pen Entry □ Other: _______________________ Memory (MB): ________________________________ Battery Type: ____________________________________ Operating System: _________________________________ Software Included: __________________________________ Accessories Included: ________________________________ Warranty Parts (months) Labor (months)


232

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: SCANNER Product Code: 150114113_1

DESCRIPTION: A Scanner is ideal for scanning documents, photos, and open books (or other three-dimensional objects) to a computer for editing, archiving, or printing. Film scanners are used for scanning negatives, 35mm slides, and small photographs. SPECIFICATIONS: The scan resolution (hardware) is 2400 dpi. The scanner has a 48-bit bit depth. Maximum scan size is 8.5 x 11.7 inches. Standard connectivity is high-speed USB.

SELECTION MANUFACTURER MODEL □ Preferred HP 3970 (Q3191A) □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Scan Resolution (dpi): _____________ Bit Depth (bit): _____________ Max. Scan Size (inches): _____________ Connectivity, e.g. USB: ______________


Total Cost [A + F]


□ Catalogue


Comments:


233

Product Characteristics for Unspecified Alternates: Scanner Type □ Flatbed □ Film □ Other: _______________ Dimensions Height (cm) Width (cm) Length (cm) Weight (kg) Resolution Optical Resolution (dpi): __________ Selectable Resolution (dpi): __________ Maximum Resolution (dpi): _______ Interface Type □ USB □ Parallel □ Sheet Fed □ SCSI □ Firewire Features □ Transparency Scanning □ Transparency Adaptor □ Automatic Document Feeder Other: ______________________ Maximum Document Size: ___________________________ Preview Speed (sec): ________________________ Bit Depth (number of bits per pixel): __________________ Software Included: _____________________________________________ Voltage Requirement (+ or – 5V): __________________ Warranty

Parts (months) Labor (months)


234



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Canon □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Scan Resolution (dpi): _____________ Bit Depth (bit): _____________ Max. Scan Size (inches): _____________ Connectivity, e.g. USB: ______________


Total Cost [A + F]


□ Catalogue


Comments:


235




236



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Sony □ Unspecified Alternate CHARACTERISTICS (For Alternate) Scan Resolution (dpi): _____________ Bit Depth (bit): _____________ Max. Scan Size (inches): _____________ Connectivity, e.g. USB: ______________


Total Cost [A + F]


□ Catalogue


Comments:


237




238

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: SERVER Product Code: 150114114_1

DESCRIPTION: Servers are made for networks that need to run multiple applications from File/Print sharing to performance-intensive core business applications. They are ideal for networks with multiple users. SPECIFICATIONS: A typical server computer has a large quantity of ECC RAM (>512 MB), and fast I/O subsystem employing technologies such as RAID, SATA and PCI Express. It runs on Intel XEON or compatible processors operating at 2.8 GHz+. It usually includes at least a 300-watt power supply, and some type of server management software including ASR (auto server recovery).

SELECTION MANUFACTURER MODEL □ Preferred HP/Compaq □ Alternate 1 □ Unspecified Alternate HARACTERISTICS (For Alternate) RAM (MB): ____________ Power Supply (watt): _____________ Processor Brand: _____________ Processor Speed (GHz): ____________ I/O Subsystem Technology, e.g. RAID, SATA, PCI Express: ___________________________________


Total Cost [A + F]


□ Catalogue


Comments:


239

Product Characteristics for Unspecified Alternates: Server Type □ Tower Server □ Blade Server □ Rack Server □ Other: _______________ Processor Processor Brand System Bus Processor Speed (GHz) Memory Cache Memory Memory Type System Memory (RAM – MB or GB)

Video Memory (Size in MB or GB)

System Memory (RAM) Expandable to ______ (MB/GB)

Hard Drive Configuration Type Primary Controller (No.

of Channels, Cache Size)

Number of Hard Drives 2nd Controller (No. of Channels, Cache Size in MB)

Hard Drive Size (Primary, 2nd, 3rd, 4th Hard Drives…)

Other Tech Information

Backup Options Tape Backup (Yes/No) Tape Backup Software Tape Backup Media Other Backup Ports Number of USB Ports Number of IEEE 1394 Ports Number of Firewire Ports Serial Ports Number of Parallel Ports Features □ Redundant Power Supplies Control Devices Keyboard Type Mouse Type Operating System □ Linux □ Unix □ Windows 2000 □ Windows 2003 □ Windows NT □ Mac OS □ Novell □ Other: ________________ Networking □ Ethernet □ Other: ________________ Technical Support □ Installation □ Service and Repair □ Other: ________________ Warranty Parts (months) Labor (months)


240

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: SERVER Product Code: 150114114_2

DESCRIPTION: Servers are made for networks that need to run multiple applications from File/Print sharing to performance-intensive core business applications. They are ideal for networks with multiple users. SPECIFICATIONS: A typical server computer has a large quantity of ECC RAM (>512 MB), and fast I/O subsystem employing technologies such as RAID, SATA and PCI Express. It runs on Intel XEON or compatible processors operating at 2.8 GHz+. It usually includes at least a 300-watt power supply, and some type of server management software including ASR (auto server recovery).

SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Dell □ Unspecified Alternate HARACTERISTICS (For Alternate) RAM (MB): ____________ Power Supply (watt): _____________ Processor Brand: _____________ Processor Speed (GHz): ____________ I/O Subsystem Technology, e.g. RAID, SATA, PCI Express: ___________________________________


Total Cost [A + F]


□ Catalogue


Comments:


241

Product Characteristics for Unspecified Alternates: Server Type □ Tower Server □ Blade Server □ Rack Server □ Other: _______________ Processor Processor Brand System Bus Processor Speed (GHz) Memory Cache Memory Memory Type System Memory (RAM – MB or GB)

Video Memory (Size in MB or GB)

System Memory (RAM) Expandable to ______ (MB/GB)

Hard Drive Configuration Type Primary Controller (No.

of Channels, Cache Size)

Number of Hard Drives 2nd Controller (No. of Channels, Cache Size in MB)

Hard Drive Size (Primary, 2nd, 3rd, 4th Hard Drives…)

Other Tech Information

Backup Options Tape Backup (Yes/No) Tape Backup Software Tape Backup Media Other Backup Ports Number of USB Ports Number of IEEE 1394 Ports Number of Firewire Ports Serial Ports Number of Parallel Ports Features □ Redundant Power Supplies Control Devices Keyboard Type Mouse Type Operating System □ Linux □ Unix □ Windows 2000 □ Windows 2003 □ Windows NT □ Mac OS □ Novell □ Other: ________________ Networking □ Ethernet □ Other: ________________ Technical Support □ Installation □ Service and Repair □ Other: ________________ Warranty Parts (months) Labor (months)


242

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: ELECTRIC MOTOR (AC Current) Product Code: 150114115_1

DESCRIPTION: Alternating current electric motors are the silent workhorse doing every conceivable and inconceivable task known to man. These motors can be very simple single-phase units with low starting torque, open frames, and bushings to support the shaft. At the other end of the spectrum are severe duty 3-phase motors totally enclosed to operate in hazardous atmospheres with the armature supported on sealed anti-friction bearing with lubricant replenishment provisions. SPECIFICATIONS: This is a two-horsepower motor with ball bearings supporting the shaft in a rigid welded base. It is rated for continuous duty and meets the requirements for insulation Class B. These motors are single phase with capacitor start and are considered drip-proof, but not sealed. It can operate on 115 or 235 volts.

SELECTION MANUFACTURER MODEL □ Preferred GE C381 □ Alternate 1 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Voltage (volts): _______________


Total Cost [A + F]


□ Catalogue


Comments:


243

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: ELECTRIC MOTOR (AC Current) Product Code: 150114115_2

DESCRIPTION: Alternating current electric motors are the silent workhorse doing every conceivable and inconceivable task known to man. These motors can be very simple single-phase units with low starting torque, open frames, and bushings to support the shaft. At the other end of the spectrum are severe duty 3-phase motors totally enclosed to operate in hazardous atmospheres with the armature supported on sealed anti-friction bearing with lubricant replenishment provisions. SPECIFICATIONS: This is a two-horsepower motor with ball bearings supporting the shaft in a rigid welded base. It is rated for continuous duty and meets the requirements for insulation Class B. These motors are single phase with capacitor start and are considered drip-proof, but not sealed. It can operate on 115 or 235 volts.

SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Jeco □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Voltage (volts): _______________


Total Cost [A + F]


□ Catalogue


Comments:


244

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: 2 WAY RADIO Product Code: 150114117

DESCRIPTION: SPECIFICATIONS:

SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Voltage (volts): _______________


Total Cost [A + F]


□ Catalogue


Comments:


245

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: DVD PLAYER Product Code: 150114118_1

DESCRIPTION: DVD Players are used to play DVD movies and also play music (in CD-R/RW and in some cases MP3 formats). Some models have recording capability as well. SPECIFICATIONS: This DVD Player plays recordable Digital Versatile Discs (DVD+R, DVD-R, DVD+RW, DVD-RW). It also plays recordable compact discs (CD-R & CD-RW).

SELECTION MANUFACTURER MODEL □ Preferred Sony NS50P □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Media Formats, e.g. DVD+R, CD-RW, etc: __________________________________________ ____________________________________________________________________________


Total Cost [A + F]


□ Catalogue


Comments:


246


Dimensions Height (cm) Width (cm) Length (cm) Weight (kg)

Features Disc Capacity: ____________ Recording Speed: _________________ Recording Speed (Number): _________ Recording Speeds (Type): __________ Playback Formats: ___________ Battery Life Rating: ____________ A/V Connections (Front or Back): _______ □ Audio Recording □ PC Software □ PC Cable □ Optical Zoom □ Audio Recording Other Features □ Progressive Scan □ S-Video Outputs □ A/V Connections □ Component Video Outputs □ Dolby Digital Decoder □ 5.1 Channel Output □ DTS Decoder □ Stereo Audio Output □ Simulated Surround □ Zoom Feature □ Coaxial Digital Output □ Remote Control □ Coaxial Digital Audio Output Accessories Included: _____________________________________________________ Power Requirements: _____________________________________________________ Warranty Parts (months) Labor (months)


247



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Panasonic □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Media Formats, e.g. DVD+R, CD-RW, etc: __________________________________________ ____________________________________________________________________________


Total Cost [A + F]


□ Catalogue


Comments:


248





249



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 JVC □ Unspecified Alternate CHARACTERISTICS (For Alternate) Media Formats, e.g. DVD+R, CD-RW, etc: __________________________________________ ____________________________________________________________________________


Total Cost [A + F]


□ Catalogue


Comments:


250





251

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: ANESTHESIA UNIT Product Code: 150114120_1

DESCRIPTION: An Anesthesia Unit is used with medical gases on a patient who is under surgery, for a specific timing and dosage, to protect and regulate the patient’s critical life functions that are affected by the surgery. SPECIFICATIONS: The control is software driven.

SELECTION MANUFACTURER MODEL □ Preferred GE S5ADU □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Unspecified Alternate) Oxygen Supply Speed (L/min): ____________ □ Ventilator Humidity Volume (mL/p): _______________ Airway Pressure Indication (kpa: ±5%): ___________ Airway Pressure Range (kPa): _____________ Respiratory Rate (/min): _______________


Total Cost [A + F]


□ Catalogue


Comments:


252

Product Characteristics for Unspecified Alternates: Performance

Power (kW) Frequency (Hz) Input Voltage (volts) Input Current (amps) Output Voltage (volts)

Dimensions Weight (kg) Height (mm) Width (mm) Length (mm) Function Oxygen Supply Speed (L/min)

Ventilator

Humidity Volume (mL/p)

Airway Pressure Indication (kpa: ±5%)

Airway Pressure Range (kPa)

Respiratory Rate (/min)

□ Networking Capabilities □ Clinical Applications

Control □ Computer □ Software Driven

Accessories Included: ______________________________________________________

Documentation Included □ Operation Manual □ Service Manual □ Software Disks


253



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Ohmeda □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Unspecified Alternate) Oxygen Supply Speed (L/min): ____________ □ Ventilator Humidity Volume (mL/p): _______________ Airway Pressure Indication (kpa: ±5%): ___________ Airway Pressure Range (kPa): _____________ Respiratory Rate (/min): _______________


Total Cost [A + F]


□ Catalogue


Comments:


254




Ventilator










255



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Drager □ Unspecified Alternate CHARACTERISTICS (For Unspecified Alternate) Oxygen Supply Speed (L/min): ____________ □ Ventilator Humidity Volume (mL/p): _______________ Airway Pressure Indication (kpa: ±5%): ___________ Airway Pressure Range (kPa): _____________ Respiratory Rate (/min): _______________


Total Cost [A + F]


□ Catalogue


Comments:


256




Ventilator










257

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: CHEMISTRY ANALYZER Product Code: 150114121_1

DESCRIPTION: This is a fully automated system for the detection and quantification of blood chemistries for different studies, follow-ups and/or detections. SPECIFICATIONS: The machine is software driven with networking capabilities.

SELECTION MANUFACTURER MODEL □ Preferred Roche Cobas Mira □ Alternate 1 □ Alternate 2 □ Alternate 3


Total Cost [A + F]


□ Catalogue


Comments:


258



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Bayer Opera □ Alternate 2 □ Alternate 3


Total Cost [A + F]


□ Catalogue


Comments:


259



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Beckman Synchron □ Alternate 3


Total Cost [A + F]


□ Catalogue


Comments:


260



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 □ Alternate 3 Abbott Spectrum


Total Cost [A + F]


□ Catalogue


Comments:


261

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: CT SCANNER Product Code: 150114122_1

DESCRIPTION: A CT Scanner is a Computerized Tomography System which takes X-rays to a patient in multi-layers and uses different techniques to diagnose a disease. SPECIFICATIONS: Software driven with networking capabilities.

SELECTION MANUFACTURER MODEL □ Preferred GE QXI , NXI , CTI □ Alternate 1 □ Alternate 2


Total Cost [A + F]


□ Catalogue


Comments:


262



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Philips PICKER Ultra-Z □ Alternate 2


Total Cost [A + F]


□ Catalogue


Comments:


263



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Siemens Volume Zoom


Total Cost [A + F]


□ Catalogue


Comments:


264

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: INFANT INCUBATOR Product Code: 150114123_1

DESCRIPTION: An Infant Incubator provides a controlled environment for newborns needing special care, such as those born prematurely. By placing an infant in an incubator, doctors and nurses can set and monitor different aspects of the child’s environment in order to create ideal conditions for survival. SPECIFICATIONS: Software driven with networking capabilities.

SELECTION MANUFACTURER MODEL □ Preferred Air Shields C-500 □ Alternate 1 □ Alternate 2


Total Cost [A + F]


□ Catalogue


Comments:


265



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Olympic 33 □ Alternate 2


Total Cost [A + F]


□ Catalogue


Comments:


266



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Ohmeda 5000


Total Cost [A + F]


□ Catalogue


Comments:


267

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: MRI (MAGNETIC RESONANCE IMAGE) Product Code: 150114126_1

DESCRIPTION: MRI is a Magnetic Resonance Image device used to diagnose patients when regular X-ray units are not capable of diagnosing in depth a patient’s case study. SPECIFICATIONS: Software driven with networking capabilities.

SELECTION MANUFACTURER MODEL □ Preferred GE LX , Horizon □ Alternate 1 □ Alternate 2 □ Alternate 3


Total Cost [A + F]


□ Catalogue


Comments:


268



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Philips NT □ Alternate 2 □ Alternate 3


Total Cost [A + F]


□ Catalogue


Comments:


269



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Toshiba Opart □ Alternate 3


Total Cost [A + F]


□ Catalogue


Comments:


270



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 □ Alternate 3 Picker Polaris


Total Cost [A + F]


□ Catalogue


Comments:


271

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: PATIENT MONITOR Product Code: 150114127_1

DESCRIPTION: A Patient Monitor is a device that monitors the patient’s vital signs (ECG, blood pressure, temperature, SPO2, CO2, etc.). SPECIFICATIONS: Software driven with networking capabilities.

SELECTION MANUFACTURER MODEL □ Preferred Philips Intellivue □ Alternate 1 □ Alternate 2 □ Alternate 3


Total Cost [A + F]


□ Catalogue


Comments:


272



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Invivo Escort □ Alternate 2 □ Alternate 3


Total Cost [A + F]


□ Catalogue


Comments:


273



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Datascope Passport □ Alternate 3


Total Cost [A + F]


□ Catalogue


Comments:


274



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 □ Alternate 3 GE


Total Cost [A + F]


□ Catalogue


Comments:


275

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: ULTRASOUND UNIT Product Code: 150114128_1

DESCRIPTION: Ultrasound (or sonography) is a technique that uses sound waves to study and treat hard-to-reach body areas. In scanning with ultrasound, high-frequency sound waves are transmitted to the area to be received back again. The result will show as an image on screen. SPECIFICATIONS: Software driven with networking capabilities.

SELECTION MANUFACTURER MODEL □ Preferred Philips Sonos □ Alternate 1 □ Alternate 2


Total Cost [A + F]


□ Catalogue


Comments:


276



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 GE Voluson □ Alternate 2


Total Cost [A + F]


□ Catalogue


Comments:


277



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Siemens Sequoia


Total Cost [A + F]


□ Catalogue


Comments:


278

Basic Heading: Electrical & Optical Equipment Basic Heading Code: 1501141 Product Name: X-RAY UNIT Product Code: 150114129_1

DESCRIPTION: Systems used to penetrate X-ray radiation to capture images of the internal structure of a part or finished product. The density of the internal features being scanned will alter the density of the transmitted X-rays. X-ray receptacles capture radiation which produces a radiographic image on film. SPECIFICATIONS: Software driven with networking capabilities.

SELECTION MANUFACTURER MODEL □ Preferred GE Legacy □ Alternate 1 □ Alternate 2 □ Alternate 3


Total Cost [A + F]


□ Catalogue


Comments:


279



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Philips Diagnost □ Alternate 2 □ Alternate 3


Total Cost [A + F]


□ Catalogue


Comments:


280



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Siemens □ Alternate 3


Total Cost [A + F]


□ Catalogue


Comments:


281



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 □ Alternate 3 Swiss Ray


Total Cost [A + F]


□ Catalogue


Comments:


282

Basic Heading: Motor Vehicles, Trailers & Semi-Trailers Basic Heading Code: 1501211 Product Name: COMMERCIAL VEHICLE (28 Passengers) Product Code: 150121101

DESCRIPTION: This bus is based on a truck chassis rated at 1.5 - 2.0 tonnes. It provides short-distance transportation for 28 passengers plus the driver. These products are locally produced for assembly to a chassis that is regionally or globally produced. SPECIFICATIONS: Carries 28 passengers for short trips or short tours. Generally air conditioned. Seats are fixed in position. The diesel engine is typically rated at 100 kW and the vehicle gross weight is limited to 8,000 kg.

SELECTION MANUFACTURER MODEL □ Preferred Isuzu NQR71 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Capacity (number of people): _______ Gross Weight Limit (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


283

Product Characteristics for Unspecified Alternates: Chassis Wheelbase (mm) Gross Vehicle Weight

(kg)

Engine Power (kW) No. of Forward Speeds Dimensions Overall Length (mm) Overall Height (mm) No. of Doors No. of Seats (Including

Driver)


284

Basic Heading: Motor Vehicles, Trailers & Semi-Trailers Basic Heading Code: 1501211 Product Name: DIESEL MINIBUS (8 Passengers) Product Code: 150121102_1

DESCRIPTION: A vehicle for commercial or private people transportation. Generally, this vehicle shares a basic vehicle platform with good transport vans by adding windows and interior amenities for people. This is a global product varying only in platform by region. SPECIFICATIONS: This type of vehicle is generally capable of carrying up to 8 people including the driver. Smaller versions have minimal luggage carrying capacity. Engine power for the Asian region is typically 75 kW with diesel engines prevailing in commercial models. Empty weight is approximately 1,400 kg.

SELECTION MANUFACTURER MODEL □ Preferred Toyota HIACF □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Capacity (number of people): _______ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


285


(kg)


Driver)


286



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Isuzu LS □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Capacity (number of people): _______ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


287


(kg)


Driver)


288



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Isuzu LQ □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Capacity (number of people): _______ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


289


(kg)


Driver)


290


DESCRIPTION: This is a purpose-built bus mounted on a lightweight (1 - 2 tonne) truck chassis with an extended wheelbase. This is a global product that is need-fulfilled by regions for regionally specific / global chassis conversions. SPECIFICATIONS: This is a diesel-powered vehicle with seats for 15 people including the driver. Power is typically about 125 kW. Amenities include air-conditioning and tinted window glass. Empty weight is approximately 6,500 kg.

SELECTION MANUFACTURER MODEL □ Preferred Toyota Coaster □ Alternate 1 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Capacity (number of people): _______ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


291


(kg)


Driver)


292


DESCRIPTION: This is a purpose-built bus mounted on a lightweight (1 - 2 tonne) truck chassis with an extended wheelbase. This is a global product that is need-fulfilled by regions for regionally specific / global chassis conversions. SPECIFICATIONS: This is a diesel-powered vehicle with seats for 15 people including the driver. Power is typically about 125 kW. Amenities include air-conditioning and tinted window glass. Empty weight is approximately 6,500 kg.

SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Mitsubishi Rosa □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Capacity (number of people): _______ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


293


(kg)


Driver)


294


DESCRIPTION: A purpose-built bus mounted on light-duty long-wheelbase truck chassis of 1 ½ - 2 tonne capacity. This is a global product that is need-fulfilled by regions for regionally specific / global chassis conversions. SPECIFICATIONS: This is a diesel-powered vehicle with seats for 21 people including the driver. Power is typically about 145 kW. Amenities include air conditioning and tinted window glass. Empty weight is approximately 7,000 kg.

SELECTION MANUFACTURER MODEL □ Preferred Toyota Coaster □ Alternate 1 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Capacity (number of people): _______ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


295


(kg)


Driver)


296


DESCRIPTION: A purpose-built bus mounted on light-duty long-wheelbase truck chassis of 1 ½ - 2 tonne capacity. This is a global product that is need-fulfilled by regions for regionally specific / global chassis conversions. SPECIFICATIONS: This is a diesel-powered vehicle with seats for 21 people including the driver. Power is typically about 145 kW. Amenities include air conditioning and tinted window glass. Empty weight is approximately 7,000 kg.

SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Mitsubishi Rosa □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Capacity (number of people): _______ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


297


(kg)


Driver)


298

Basic Heading: Motor Vehicles, Trailers & Semi-Trailers Basic Heading Code: 1501211 Product Name: INTRA CITY BUS (26-44 Passengers) Product Code: 150121105_1

DESCRIPTION: This is a purpose-built bus for short distances within a city or town. Seating is basic and accommodation is made for standing passengers. The chassis for these buses use truck-based components such as engines and transmissions, but the drivetrain architecture is rear engine / rear wheel drive. SPECIFICATIONS: This bus is structured to have separate entry and exit, one in front and one in the middle or toward the rear on the curb side of the bus. Gross vehicle weight ranges from 11,000 – 15,000 kg and power ranges from 130 to 150 kW.

SELECTION MANUFACTURER MODEL □ Preferred Isuzu FSR □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Capacity (number of people): _______ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


299


(kg)


Driver)


300



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Isuzu FTR33P □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Capacity (number of people): _______ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


301


(kg)


Driver)


302



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Hino □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Capacity (number of people): _______ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


303


(kg)


Driver)


304

Basic Heading: Motor Vehicles, Trailers & Semi-Trailers Basic Heading Code: 1501211 Product Name: INTRA CITY BUS (45 Passengers) Product Code: 150121106_1

DESCRIPTION: A purpose-built bus for long-distance travel between cities or for touring. The chassis is purpose-built for comfort and quiet operation. Significant storage is provided for passenger luggage and express goods. These buses have rear engine / rear drive architectures. SPECIFICATIONS: Capacity to carry 45 passengers in comfort. Suspension can be leaf / coil spring or air, depending on the manufacturer. Seats are premium with headrest and reclining feature. A center aisle provides access to two seats on either side of the aisle. Air conditioning, heating, sound system, restroom and individual reading lights are typical. All glass windows are tinted. Power can range from 180 to 240 kW. Gross vehicle weight will range from 13,500 to 16,000 kg.

SELECTION MANUFACTURER MODEL □ Preferred Hino □ Alternate 1 □ Alternate 2 □ Alternate 3 □ Unspecified Alternate CHARACTERISTICS (For Unspecified Alternate) Power (kW): _______________ Capacity (number of people): _______ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


305


(kg)


Driver)


306



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Isuzu LT132 □ Alternate 2 □ Alternate 3 □ Unspecified Alternate CHARACTERISTICS (For Unspecified Alternate) Power (kW): _______________ Capacity (number of people): _______ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


307


(kg)


Driver)


308



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Isuzu LV123/143 □ Alternate 3 □ Unspecified Alternate CHARACTERISTICS (For Unspecified Alternate) Power (kW): _______________ Capacity (number of people): _______ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


309


(kg)


Driver)


310



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 □ Alternate 3 Mitsubishi Aero Queen □ Unspecified Alternate CHARACTERISTICS (For Unspecified Alternate) Power (kW): _______________ Capacity (number of people): _______ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


311


(kg)


Driver)


312

Basic Heading: Motor Vehicles, Trailers & Semi-Trailers Basic Heading Code: 1501211 Product Name: CAB CHASSIS (5 Tonnes) Product Code : 150121107_1

DESCRIPTION: This is a popular-size truck for goods haulage in congested areas. It can be used with every known type of hauling unit including various hoisting systems. This is a global size truck with regional and global suppliers. SPECIFICATIONS: This truck has a gross vehicle weight (GVW) of 5 tonnes and is powered by a diesel engine meeting EPA Tier 2 (Euro II) emissions rated at 130 kW.

SELECTION MANUFACTURER MODEL □ Preferred Isuzu ELF (NPR) □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ GVW (tonnes): _______________


Total Cost [A + F]


□ Catalogue


Comments:


313


(kg)

Engine Power (kW) Capacity (liters) No. of Forward Speeds Dimensions Body & Payload Allowance (kg)

Day Cab Length (mm)

Suspension □ Spring Suspension (Front) □ Spring Suspension (Rear) □ ABS Braking System Used Equipment Total Operating Km: ___________ Purpose/Application: _____________ Total Km Since Rebuild Condition: Engine: ___________ □ Excellent □ Good Drivetrain: ___________ □ Average □ Fair Hydraulics: ___________ □ Poor


314



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Mitsubishi □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ GVW (tonnes): _______________


Total Cost [A + F]


□ Catalogue


Comments:


315


(kg)


Day Cab Length (mm)



316



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Hino 145 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ GVW (tonnes): _______________


Total Cost [A + F]


□ Catalogue


Comments:


317


(kg)


Day Cab Length (mm)



318

Basic Heading: Motor Vehicles, Trailers & Semi-Trailers Basic Heading Code: 1501211 Product Name: CAB CHASSIS (10 Tones) Product Code: 150121108_1

DESCRIPTION: This truck is a global size served by global and regional manufacturers. It is used to transport packaged goods, bulk packages, bulk aggregate, and bulk liquids. It is also a popular retrieval vehicle for towing and highway emergencies. SPECIFICATIONS: The truck is typically equipped with a certified Tier 2 (Euro II) diesel of 150 kW. The gross vehicle weight (GVW) is 10 tonnes.

SELECTION MANUFACTURER MODEL □ Preferred Isuzu Forward Max (FTR) □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ GVW (tonnes): _______________


Total Cost [A + F]


□ Catalogue


Comments:


319


(kg)


Day Cab Length (mm)

Suspension □ Spring Suspension (Front) □ Spring Suspension (Rear) □ ABS Braking System


320



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Hino 238 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ GVW (tonnes): _______________


Total Cost [A + F]


□ Catalogue


Comments:


321


(kg)


Day Cab Length (mm)



322



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Mitsubishi □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ GVW (tonnes): _______________


Total Cost [A + F]


□ Catalogue


Comments:


323


(kg)


Day Cab Length (mm)



324


DESCRIPTION: This is a global weight classification that is served by global and regional manufacturers. It is used to transport packaged goods, bulk packages, bulk aggregate and bulk liquids. Chassis are mated to hauling units separately by different manufacturers. SPECIFICATIONS: The truck is typically equipped with a certified Tier 2 (Euro II) diesel engine of 195 kW. The gross vehicle weight (GVW) is 15 tonnes.

SELECTION MANUFACTURER MODEL □ Preferred Isuzu H Series □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ GVW (tonnes): _______________


Total Cost [A + F]


□ Catalogue


Comments:


325


(kg)


Day Cab Length (mm)



326



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Hino 338 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ GVW (tonnes): _______________


Total Cost [A + F]


□ Catalogue


Comments:


327


(kg)


Day Cab Length (mm)



328



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Mitsubishi □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ GVW (tonnes): _______________


Total Cost [A + F]


□ Catalogue


Comments:


329


(kg)


Day Cab Length (mm)



330

Basic Heading: Motor Vehicles, Trailers & Semi-Trailers Basic Heading Code: 1501211 Product Name: PICKUP TRUCK Product Code: 150121110_1

DESCRIPTION: A Pickup Truck is a multi-purpose vehicle for transporting people/goods. Work trucks typically have one row of seats for 3 people. Pickups for personal use have 2 rows of seats for 5-6 people, and a cargo bed behind the cab. SPECIFICATIONS: The chosen specification has 2 rows of seats and 4 doors. Power is supplied by a diesel engine of approximately 3 liters and 75 kW. Vehicle weight is typically 1,500 to 1,600 kg and is capable of carrying loads up to 900 kg.

SELECTION MANUFACTURER MODEL □ Preferred Toyota Hilux □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Passenger Capacity (number of people): _______ Cargo Capacity (kg) _________ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


331


(kg)


Day Cab Length (mm)



332



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Nissan Frontier □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Passenger Capacity (number of people): _______ Cargo Capacity (kg) _________ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


333


(kg)


Day Cab Length (mm)



334



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Isuzu D-Max □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Passenger Capacity (number of people): _______ Cargo Capacity (kg) _________ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


335


(kg)


Day Cab Length (mm)



336

Basic Heading: Motor Vehicles, Trailers & Semi-Trailers Basic Heading Code: 1501211 Product Name: VAN TRUCK Product Code: 150121111_1

DESCRIPTION: This is a global item that is used to transport goods in a weather-protected cargo area. These vehicles are basic, with a seat for the driver in all situations and a passenger seat in lieu of additional cargo capacity. They are typically created from light truck / heavy automobile components. SPECIFICATION: This vehicle is generally capable of transporting 500 - 1,500 kg and is powered by a 75 kW diesel engine. The body portion behind the driver has no side windows and typically has only a curbside door and rear opening door with a window. Empty weight is typically 1,000 to 1,200 kg.

SELECTION MANUFACTURER MODEL □ Preferred Toyota Hi Ace □ Alternate 1 □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Cargo Capacity (kg) _________ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


337


(kg)


Day Cab Length (mm)



338



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 Isuzu LD □ Alternate 2 □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Cargo Capacity (kg) _________ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


339


(kg)


Day Cab Length (mm)



340



SELECTION MANUFACTURER MODEL □ Preferred □ Alternate 1 □ Alternate 2 Hyundai Grace □ Unspecified Alternate CHARACTERISTICS (For Alternate) Power (kW): _______________ Cargo Capacity (kg) _________ Weight (kg): _______________


Total Cost [A + F]


□ Catalogue


Comments:


341


(kg)


Day Cab Length (mm)


The Original Equipment Product Specifications Used in the...

Documents

Transcript of The Original Equipment Product Specifications Used in the...