The Master’s of Arts Degree in Career and Technical Education (CTE) Cohort 2010 Cohort 2009.

14
The Master’s of Arts Degree in Career and Technical Education (CTE) Cohort 2010 Cohort 2009

Transcript of The Master’s of Arts Degree in Career and Technical Education (CTE) Cohort 2010 Cohort 2009.

Page 1: The Master’s of Arts Degree in Career and Technical Education (CTE) Cohort 2010 Cohort 2009.

The Master’s of Arts Degreein Career and Technical Education (CTE)

Cohort 2010

Cohort 2009

Page 2: The Master’s of Arts Degree in Career and Technical Education (CTE) Cohort 2010 Cohort 2009.

The field of career and technical education has come a long way. Under new designs, it has continued to serve and benefit both youth and adults. For example, do you know that about half of all high school students and one-third of college students participate in career-oriented programs? Further, it has been estimated that about 40 million adults benefit from short-term, postsecondary occupational training every year.1

As CTE continues to evolve, the field is demanding a new generation of professional leaders with the capacity to lead the development and implementation of new designs, and be prepared to monitor program effectiveness in an era of increased accountability.

1Darkenwald, Gordon, and Kwang Kim. 1998. Statistics in Brief: Adults’ Participation in Work-Related Courses: 1994–1995. Washington, D.C.: U.S. Department of Education, Office of Educational Research and Improvement, National Center for Education Statistics. NCES 98–309.

Career and Technical Education:Career and Technical Education:A Field in TransitionA Field in Transition

“Eighty percent of employers surveyed by the National

Association of Manufacturers report a serious shortage of

qualified workers. [CTE] teachers must teach their students how to read technical materials in their

fields, prepare technical documents, pass written exams

with open-ended writing assignments, and use

mathematics to solve work-related problems.”

High Schools That Work (2004). Implementing High-Quality Career/Technical Programs at:

http://www.sreb.org/programs/hstw/professionalDev/2004-05Workshops/High-Quality_CT.asp

Page 3: The Master’s of Arts Degree in Career and Technical Education (CTE) Cohort 2010 Cohort 2009.

Recognizing the changing nature of the field and the challenges involved in making preparation for work and through work more rigorous, the M.A. program in CTE is designed to prepare administrators in all aspects of program design, operation, and evaluation.

To meet this focus, the program builds upon school restructuring principles and connections with contextual/applied teaching and learning, integration strategies with academic education, and organizational fit with community/workforce development systems.

The Master’s of Arts Degree in CTEThe Master’s of Arts Degree in CTEMission and ApproachMission and Approach

“The content of the curriculum, where practical, should connect to real-life

applications of knowledge and skills to help students link their education to the

future.”

National Association of Secondary School Principals, (2004).

Breaking Ranks II, Strategies for Leading High School Reform, Executive Summary, p. 6.

“Students develop flexible understanding of when, where, why,

and how to use their knowledge to solve new problems if they learn how

to extract underlying themes and principles from their learning exercises.

Understanding how and when to put knowledge to use--known as conditions

of applicability--is an important characteristic of expertise. Learning in

multiple contexts most likely affects this aspect of transfer.”

Bransford, J.D., Brown, A.L., & Cocking, R.R. (1999). How people learn: Brain, mind, experience, and school,

p. 236.

Page 4: The Master’s of Arts Degree in Career and Technical Education (CTE) Cohort 2010 Cohort 2009.

1. Articulate a personal philosophy of education

2. Enhance curriculum, instructional, and assessment practices

3. Demonstrate administrative and supervisory competencies

4. Establish and foster relationships between CTE programs and stakeholders

5. Enhance personal role as a reflective and professionally active practitioner

The Master’s of Arts Degree in CTEThe Master’s of Arts Degree in CTEProgram GoalsProgram Goals

Our goal is to prepare professionals who can

create effective learning conditions for youth and adults and

facilitate their intellectual and career

development.

Five goals guide the preparation of

participants in the M.A. in CTE program. Upon

completion of the program, participants

should be able to:

Page 5: The Master’s of Arts Degree in Career and Technical Education (CTE) Cohort 2010 Cohort 2009.

Helping Participants Build Careers in Helping Participants Build Careers in CTECTEAdministrators in school district central

offices oversee public schools under their jurisdiction. This group includes

those who direct subject-area programs such as English, music, vocational education, special education, and

mathematics. They supervise instructional coordinators and

curriculum specialists, and work with them to evaluate curriculums and

teaching techniques and improve them. Related positions include Training and

Development Managers, Education Administrators (Postsecondary), Social

and Community Service Managers, Training and Development Specialists,

Instructional Coordinators.

For a full description see: Education administrators,Occupational Outlook Handbook of the U.S. Department

of Labor

Links for employment opportunities in Florida:

K12 School District Employment Opportunities

Florida Community Colleges & Workforce Education

This M.A. program is for practicing CTE educators who teach in or serve in support or leadership positions at the school, technical institute, district or community college level.

For those seeking certification as Local Director of Vocational Programs, the program meets the requirements of the Florida Department of Education (Administrative Rule 6A-4.044).*

Program graduates are prepared for productive careers in secondary and post-secondary teaching, training, and for positions in administration of vocational/CTE programs in local and state government agencies, and public and private organizations (e.g., business/industry, consultants).

*Note: Not including a course in law, finance, etc.

Page 6: The Master’s of Arts Degree in Career and Technical Education (CTE) Cohort 2010 Cohort 2009.

Program DeliveryProgram DeliveryOffered entirely online (participants come to campus three times per year for orientation/wrap-up and networking), the two year program is committed to providing participants with high quality experiences including personalized feedback, collection and analysis of local data, and opportunities to demonstrate understandings and competencies.

The online delivery format draws from principles for effective distance learning to make learning engaging and, in many ways, even more dynamic than classroom learning.

While working at their own pace, participants conduct research activities, work in teams, exchange ideas, and develop lasting professional networks as they complete the programs as a cohort. Participants’ feedback has been overwhelmingly positive as the program delivery continues to improve.

Guiding Principles for DistanceTeaching and Learning

Learner-centered strategies include modular, stand-alone units that are

compatible with short bursts of learning. Where possible, learning outcomes

should relate to real-life experiences through simulation and application.

Various learning styles are best engaged by using a variety of media to achieve

learning outcomes.Learning environments must include

problem-based as well as knowledge-based learning.

Learning experiences based on interaction and collaboration support

learning communities while building a support network to enhance learning

outcomes.

From American Distance Education Consortium

Page 7: The Master’s of Arts Degree in Career and Technical Education (CTE) Cohort 2010 Cohort 2009.

Our faculty have complementary expertise in career and technical education programs; have published, presented, and consulted widely, and take pride in having a very student-friendly approach and feel very strongly that “we are here to serve students”.

Faculty SupportFaculty Support

Program Faculty Career and Technical Education

                            

Dr. Bill BlankCareer and Technical EducationOffice:  EDU 151DPhone: (813) 974-0314Fax:    (813)  974-3366Email:  [email protected]

Dr. Blank received a B.S. Degree in Industrial Technology, an M.S. in

Technical Education from Memphis State University, and a Ph.D. in Vocational, Technical and Career Education from Florida State University. Technical teaching experience includes secondary Industrial Arts and Engineering Graphics at the technical institute level. He also has worked in industry as a technician, drafter, product engineer and product manager.   Dr. Blank has presented on various aspects of career and technical education and educational reform. Consultancy locations include Africa, New Zealand, Honduras, Scotland and most Canadian provinces and states in the U.S.

Dr. Janet Scaglione Office:   EDU 151F Phone:  (813) 974-0038 Fax:     (813) 974-3366 Email:   [email protected]

  Dr. Scaglione is a native of Tampa, Florida and a graduate of the University of South Florida . Her Ph. D. is in Business

Education/Industrial Psychology and her professional experiences in teacher education have centered on reflective practice, interactive learning environments and the journey to personal passion. She shares her energy, creativity and expertise through a variety of programs and is a frequent keynote presenter for the National Business Education Association and other national, state and local groups. She was recognized as Florida 's Outstanding Post-Secondary Educator (1993) and received two Outstanding Teaching awards at USF (1992, 1990).

Dr. Victor Hernandez Office:  EDU 151B Phone: (813) 974-1277 Fax:    (813)  974-3366 Email:  [email protected]

Dr. Hernandez holds a B.S. Degree in Agronomy. He also received a M.S. in Agricultural Education and a Ph.D. in Educational Research and Evaluation from

Virginia Tech. For several years he served as Associate Researcher at the University of Wisconsin-Madison. He later served as Associate Professor at Florida State University, and as Senior Educational Researcher in the Center for Educational Technologies (CET)—a center sponsored by NASA—at Wheeling Jesuit University. Over the years he has collaborated with organizations and faculty at a number of universities nationally and internationally. This synergistic collaboration has resulted in a number of publications featuring professional development, contextual teaching/learning, and the integration of mathematics and career education.

Department Faculty Adult, Career, and Higher Education

Page 8: The Master’s of Arts Degree in Career and Technical Education (CTE) Cohort 2010 Cohort 2009.

M.A. in CTE Program DesignM.A. in CTE Program Design

OrganizationalMission

The philosophical and social foundations of the field provide an understanding of CTE’s evolving nature, new directions, and the role it can play in the larger educational enterprise in our nation

Related knowledge helps participants analyze and sharpen program missions and connect to implications for serving all students

EDF5607

Social Foundations of

Education

EVT 6661

Current Trends

EVT

Equity in CTE

“[Career and Technical Education] has important short- and medium-run earning benefits for most

students at both the secondary and postsecondary levels, and these benefits extend to those who are

economically disadvantaged.”

National Assessment of Vocational Education, Final Report to Congress (2004), Executive Summary, p. 1.

Page 9: The Master’s of Arts Degree in Career and Technical Education (CTE) Cohort 2010 Cohort 2009.

Curriculum and Instruction

OrganizationalMission

Program participants learn about new CTE curricular models, instructional approaches, and alignment strategies with program mission

A key component is an emphasis on the interface of effective curriculum, instruction, and assessment strategies, and innovative strategies for the integration of CTE with academic education and school-based and work-based learning connections

EVT 5369

Preparation & Development for Teaching

EVT 6930

Curriculum Design and Evaluation

ADE 6360

Methods of Teaching Adult Education

M.A. in CTE ProgramM.A. in CTE Program

“Schools must integrate academic and career/technical instruction and organize small learning communities with a career focus in order to get

students to see the value of working harder in high school.”

High Schools That Work (2004). Implementing High-Quality Career/Technical Programs at:

http://www.sreb.org/programs/hstw/professionalDev/2004-05Workshops/High-Quality_CT.asp

Page 10: The Master’s of Arts Degree in Career and Technical Education (CTE) Cohort 2010 Cohort 2009.

School Structuresand Supports

Curriculum and Instruction

OrganizationalMission

Program supports for implementation are reviewed and analyzed through examination of local practices and benchmarking strategies

Managerial roles and functions are particularly emphasized to stress working knowledge and skills in operating local programs (e.g., budgeting)

EVT 6264

Administration of Local Programs

EVT 6265

Supervision of Local Programs

M.A. in CTE Program DesignM.A. in CTE Program Design

The idea for comprehensive change may begin in the principal’s office, but it most assuredly can end there either through incomplete planning, failure to involve others,

neglect, or failure to create conditions that allow a new order of things to emerge in the high school. Creating those conditions is often the first challenge…

Breaking Ranks II: Strategies for Leading High School Reform, National Association of Secondary School Principals (NASSP)

http://www.principals.org/s_nassp/bin.asp?CID=230&DID=47560&DOC=FILE.PDF

Page 11: The Master’s of Arts Degree in Career and Technical Education (CTE) Cohort 2010 Cohort 2009.

M.A. in CTE Program DesignM.A. in CTE Program Design

External Factorsand Supports

School Structuresand Supports

Curriculum and Instruction

OrganizationalMission

EDG 6931

Emerging Workplace Competencies

EVT 5664

CommunityDevelopment

Participants learn about designing and operating programs taking into consideration the nature and extent of external supports in the community and beyond. A key aspect of related knowledge and skills is the ability to determine and establish a fit between a CTE program and community/workforce development efforts

Another important component is the identification of workplace competencies required for successful participation in emerging occupations and infusion into the CTE curriculum

To build the organizational capacity required to promote student learning of high intellectual quality [and career development], schools need

support from beyond their walls.

Newmann & Wehlage (1997) on what makes successful school restructuring.

Page 12: The Master’s of Arts Degree in Career and Technical Education (CTE) Cohort 2010 Cohort 2009.

Program design, implementation, and evaluation is approached from a systemic and practical framework to establish organizational connections and requirements for

successful operation and improvement of CTE programs

External Factorsand Supports

School Structuresand Supports

Curriculum and Instruction

OrganizationalMission

EDG 6931

Emerging Workplace

Competencies

EVT 5664

CommunityDevelopment

EVT 6264

Administration of Local Programs

EVT 6265

Supervision of Local Programs

EVT 5369

Preparation & Development for Teaching

EVT 6930

Curriculum Design and Evaluation

ADE 6360

Methods of Teaching Adult Education

EDF5607

Social Foundations of

Education

EVT 6661

Current Trends

EVT

Equity in CTE

Implications for school-wide/district and distributive leadership

EVT 6948

Practicum/Portfolio DevelopmentEDG 6931

Improvement of CTE Programs

M.A. in CTE Program DesignM.A. in CTE Program Design

Page 13: The Master’s of Arts Degree in Career and Technical Education (CTE) Cohort 2010 Cohort 2009.

What Do Participants Say About the M.A. in CTE What Do Participants Say About the M.A. in CTE Program?Program?

Page 14: The Master’s of Arts Degree in Career and Technical Education (CTE) Cohort 2010 Cohort 2009.

For more information on the MA in CTE program contact:  

Dr. Edward FletcherAssistant Professor and MA Program Advisor

Office: EDU 151A,Phone: (813) 974-0029 Fax: (813) 974-336, E-mail: [email protected]

Join us!We are currently accepting applications