The look of wood, - Quality Edge...M15 Napa Vine 108 Weathered Wood 108 Weathered Wood (Shake) 109...
Transcript of The look of wood, - Quality Edge...M15 Napa Vine 108 Weathered Wood 108 Weathered Wood (Shake) 109...
The look of wood,TruCedar®
the performance of steel.
Single 8"Norwood with Herringbone and Navy
SustainabilityTruCedar@ steel siding utilizes one of the strongest, most functional and sustainable materials on our planet. Our entire siding line was expertly designed by our engineering team from pencil sketch to finished profile and perfectly mimics the look of real wood siding in a designer color palette.
The Sustainability & Function of Steel
FunctionTruCedar’s steel core provides unmatched impact resistance and doesn’t crack, melt or wick water like other siding materials.
TruCedar® Fiber Cement Vinyl
Warranty Lifetime 30 year 20-Lifetime
Resistant to Warping/Shrinking
100% Recyclable
Zero Associated Health Risks
Non-Combustible
Lifetime Paint System
Moisture Resistant
Will Not Melt
Weather Resistant
Real Woodgrain Look
CompareTruCedar® vs. Fiber Cement & Vinyl
Single 6"Timber Ash with White
SOURCES:
1. “NIOSH Research Finds Practical Solution to Controlling Hazardous Dust when Cutting Fiber-Cement Siding.” Center for Disease Control and Prevention. The National Institute for Occupational Safety and Health, 18 June 2015. Web. 4 Dec. 2015.
2. Banilla, Emilio. “VINYL SIDING HEALTH CONCERNS.” Siding Magazine. N.p., n.d. Web. 8 Oct. 2012.
4 5
6" Board & BattenIronstone with White
Stronger Than Steel:CarbonTech60™
CarbonTech60™
Each TruCedar profile is enveloped in a G60 zinc coating that provides both a physical barrier and cathodic protection. This prevents moisture and oxygen from reaching the steel core making TruCedar “Stronger Than Steel.”
Steel Core
SunMaster50® Paint System
CarbonTech60™
Corrosion Resistant Barrier
TruCedar’s Advanced Steel TechnologyWe chose a carbon reinforced steel alloy because of its ability to protect your home against everything mother nature can throw at it.
PerformanceTruCedar’s no nonsense lifetime warranty offers specific guarantees against cracking, chipping, peeling, chalking and fading common with other siding materials.
Real Wood
Peeling
VinylCracking,
Fading
Fiber Cement
Cracking
TruCedar®
No Nonsense Lifetime Warranty
Double 4" Foothill Blue with White
8 9
SunMaster50® Difference
SunMaster50®
TruCedar SunMaster50® is a thermally-set paint system which provides a strong, durable and mold resistant surface. SunMaster50® also offers extreme fade protection. Below are the results from a 14 year long outdoor study conducted to test the fade comparison of SunMaster50® (PVDF), Siliconized Polyester (SMP) and Polyester.
Reflects SunlightTruCedar’s SunMaster50® paint system has the ability to reflect solar radiation, which has the potential to save you money on your energy bills.This reflective ability is made possible because we coat our solid and HD woodgrain products with a PVDF paint which can provide for a cooler sidewall.
PolyesterSMPSunMaster50®Original
Single 6" Captiva
10 11
280 White
805 Pewter
410 Thatch
503 Eggshell*
462 Silver Lining*
414 Ironstone
819 Herringbone*
415 Gray Dusk
425 Statuary Bronze
401 Bennington Beige
461 Harbor Mist*
409 Sycamore509 Norwood
405 Foothill Blue
307 Ripe Olive*
460 Great Water*
411 Cottage Red
Color Palette
HD Woodgrain Colors available in:• Double 4"• Single 6" & 8"• Single 6" Dutch Lap• Board & Batten 6" & 10"• Shake Sidewall (3 colors)
Solid Colors available in:• Double 4"• Single 6" & 8"• Single 6" Dutch Lap• Board & Batten 6" & 10"
417 Birch M12 Captiva
M18 Mountain Laurel
M16 Cider Mill
M17 English Saddle
416 Spruce
M15 Napa Vine
108 Weathered Wood
108 Weathered Wood (Shake)
109 Cedar
109 Cedar (Shake)
106 Timber Ash
106 Timber Ash (Shake) Although we make every effort to ensure color accuracy in our printing process, your final product may not be an exact match to those displayed.
*2019 New Colors
12 1312 13
Single 6" English Saddle with Ironstone
TraditionalHorizontal Profiles Standard Clapboard Siding vs Dutch Lap Siding:
Dutch Lap Siding has a simulated notch/bend along the top edge on the board or panel that produces a distinct look which simulates a hand-cut notch in each board. Years ago homeowners wanted more options than just the standard siding so a carpenter would hand carve the notch along the top of each board. Since it was hand carved, it was more expensive and used on high-end homes.
Siding that runs horizontally across your house from end to end is sometimes referred to as ‘horizontal siding’ or lap siding. Contractors generally use the words clapboard, lap siding and horizontal siding inter-changeably.
Single 6"English Saddle27 Colors
Also available in Foam Backed Also available in Foam Backed
Double 4"Foothill Blue27 Colors
Single 8"Sycamore27 Colors
Single 6" Dutch LapMountain Laurel27 Colors
7" 6.13"7" 6.13"
8.75" 8"8.75" 8"
16 17
Shake SidewallCedar3 Colors
Contemporary,Distinct Profiles TruCedar® Shake Sidewall provides the natural beauty of real wood shake without the maintenance. Used as an accent for dormers, peaks, under porches or as a whole house application.
Board & Batten is derived from the look of alternating wide boards and narrow wooden strips, called battens. Traditionally made from wood, TruCedar’s Board & Batten siding provides the crisp look of real wood, without the scraping and repainting.
.75"
7.88"
6"
.75"
11.88"
10"
6" Board & BattenBennington Beige27 colors
10" Board & BattenThatch27 colors
18 19
Supporting Accessories
*Best corner for Board & Batten applications.
5⁄8" Undersill 1" J-Channel(Board & Batten)
3⁄4" J-Channel 5⁄8" L-Channel
.625”
1.5”
.625”
1.5”
3/4”
1.44”
3/4”
3/4”
1.44”
3/4”
1”
1.44”
.75”1.625”
.625”
.88"
.38"
1.57"
.30"
PAINTED SIDE
EMBOSSING TEXTURE
Z-Flashing(Board & Batten)
Batten Trim(Board & Batten)
2-Piece Cap (Outside Corner Post)
1-Piece (Outside Corner Post)
2-Piece Base (Outside Corner Post)
1-Piece (Inside Corner Block)
Brick Ledge Flashing
6" & 8" Fascia
3.75”
.25”
3.75”
1.25”
1.25”
.69”
.69”
.25”
.5”
.5”
3.75”
.25”
3.75”
1.25”
1.25”
.69”
.69”
.25”
.5”
.5”
.88” 1.36”
1.78”
.50”
PAINTED SIDE
EMBOSSING TEXTURE
3.75”.25”
.25”
3.75” 1.7”
.88
.75”
.4”
.75”
1.7”
.88” 1.31”
.88”
PAINTED SIDE
• 14.77" x 30' Trim Coil• 1.25" Steel Trim Nails• Touch-Up Paint• Tenryu Saw Blade
• Retention Clip• 10-16 x 1.25" Mill Screw• Steel Trim Nails• 24" x 25' Trim Coil• Touch-Up Paint Brush• Spray Paint
5⁄8" Undersill 1-Piece Outside Corner Post
3⁄4" J-Channel 4" Starter(Shake Sidewall Specific)
4”
TruCedar® Siding Accessories
TruCedar® Shake Sidewall Accessories
Siding Shake Sidewall
F
F
G
G
I
I J K
O
O
C
C
N
N
P
P
L
J
6”7/8”
8”7/8”
LM
M
H
H
E
E
A
K
A
D
D
B
B
2.24”
1.74”
105°
.38”
PAINTED SIDE
20 21
ColorWorks Collection
All
TruC
edar
Co
lors
TruC
edar
So
lids
Shak
e Si
dew
all
SIDING PROFILES & SEAMLESS
D4, S6, S6DL, S8, 6BB & 10BB •
Seamless Coil - 9.075", 10.77", 13.25" & 14.77" •
Shake Sidewall Panel •
ACCESSORIES*
Undersill •
J-Channel - 3/4" & 1" •
L-Channel - 5/8" •
Batten Trim •
Board and Batten Z-Trim •
Brick Ledge Flashing •
1 Pc. Inside Corner Block •
1 Pc. Outside Corner Post •
2 Pc. Outside Corner Post •
Fascia - 6" & 8" •
Steel Trim Coil -14.77" x 30 ft •
Steel Trim Nails - 1.25" •
Touch-Up Paint •
Tenryu Saw Blade
TruVent® Hidden Vent Soffit •
J-Channel - 1/2" •
Mitre Divider •
Recessed Crown Molding - 1/2" •
Aluminum Trim Coil - 24" x 50 ft •
SHAKE SIDEWALL ACCESSORIES
Utility Trim •
J-Channel - 3/4" •
1 Pc. Outside Corner Post •
Steel Trim Coil - 24" x 25 ft •
Steel Trim Nails •
Touch-Up Paint •
Spray Paint •
16 x1.25" Mill Screw •
Retention Clip •Single 8" with 10" Board & Batten Bennington Beige with Ironstone
22 23
TCBROCH Rev. 10/19
Quality Edge Headquarters
2712 Walkent Drive NWWalker, MI 49544
Quality Edge Georgia
5520 Export Blvd.Garden City, GA 31408
Quality Edge Texas
634 107th StreetArlington, TX 76011
888.784.0878QualityEdge.com/TruCedar
U.S. Patent No. 9,097,019; 9,181,702; 9,181,703 & 9181704