The KP Pushbutton - Checkfluid · The KP Pushbutton allows for easy sampling of pressurized systems...
1
Checkfluid | P: 519-652-6373 | www.checkfluid.com The KP Pushbutton allows for easy sampling of pressurized systems by pushing a button. The push button style eliminates the need for probes and reduces the chance for cross contamination. To sample, hold the bottle under the spout of the button and then push. The KP Pushbutton Part Number Locknut or Weathersleeve Port Thread Size and Type Valve Sealing Valve Material KP14NV Weathersleeve 1/4”-18 NPTF Viton Carbon Steel KP14NVR Weathersleeve 1/4”-18 NPTF Viton Stainless Externals KP14NV-R Weathersleeve 1/4”-18 NPTF Viton 316 Stainless Steel KP716UV Weathersleeve 7/16”-20 ORB Viton Carbon Steel KP716UVR Weathersleeve 7/16”-20 ORB Viton Stainless Externals KP716UV-R Weathersleeve 7/16”-20 ORB Viton 316 Stainless Steel Notes: Other thread types and sizes are available Valve Sealing Options: Nitrile, Viton, Neoprene Valve Material Options: Carbon Steel, 316 Stainless Steel or Stainless Externals Push button style valve: push to open valve, release to automatically close valve Rugged spout design with easy to grip knurled cap Standard weather sleeve (locknut option available) Variety of thread options for direct installation Unique 360º rotating spout offers convenient sampling and installation without swivel fittings Special Part Number: KPQ14NP - for Ammonia and Refrigerant Compressors KP Pushbutton Hydraulics | Engines | Compressors | Transmissions | Coolant | Turbines No probes needed Low purge volume Patented elastomeric vacuum tight seals Automatic valve shut off Remote access available Reliable: dual sealed design independently tested at 7800 psi for one million cycles Locknut available for extra protec- tion against high vibration Silicone heat protection pad also available Sampling range of 5 - 750 psi (0.03 - 5.17 MPa) • • • • • • • • • Benefits
Transcript of The KP Pushbutton - Checkfluid · The KP Pushbutton allows for easy sampling of pressurized systems...
Checkfluid | P: 519-652-6373 | www.checkfluid.com
The KP Pushbutton allows for easy sampling of pressurized systems by pushing a button. The push button style eliminates the need for probes and reduces the chance for cross contamination. To sample, hold the bottle under the spout of the button and then push.
The KP Pushbutton
Part Number
Locknut or Weathersleeve
Port Thread Size and Type
Valve Sealing
Valve Material
KP14NV Weathersleeve 1/4”-18 NPTF Viton Carbon Steel KP14NVR Weathersleeve 1/4”-18 NPTF Viton Stainless ExternalsKP14NV-R Weathersleeve 1/4”-18 NPTF Viton 316 Stainless SteelKP716UV Weathersleeve 7/16”-20 ORB Viton Carbon SteelKP716UVR Weathersleeve 7/16”-20 ORB Viton Stainless ExternalsKP716UV-R Weathersleeve 7/16”-20 ORB Viton 316 Stainless Steel
Notes: Other thread types and sizes are availableValve Sealing Options: Nitrile, Viton, Neoprene
Valve Material Options: Carbon Steel, 316 Stainless Steel or Stainless Externals
Push button style valve: push to open valve, release to automatically close valve
Rugged spout design with easy to grip knurled cap
Standard weather sleeve (locknut option available)
Variety of thread options for direct
installation
Unique 360º rotating spout offers convenient sampling
and installation without swivel fittings
Special Part Number:KPQ14NP - for Ammonia and Refrigerant Compressors
KP Pushbutton
Hydraulics | Engines | Compressors | Transmissions | Coolant | Turbines
No probes neededLow purge volumePatented elastomeric vacuum tight sealsAutomatic valve shut offRemote access availableReliable: dual sealed design independently tested at 7800 psi for one million cyclesLocknut available for extra protec-tion against high vibrationSilicone heat protection pad also availableSampling range of 5 - 750 psi (0.03 - 5.17 MPa)
•••
•••
•
•
•
Benefits
