THE GAP CLOSE COUPLED BACK TO WALL BACK INLET … · THE GAP CLOSE COUPLED BACK TO WALL BACK INLET...
5
ROCA SPECIFICATION Recommended Use Domestic, hotel and commercial Rim Configuration Box Rim Bowl Configuration P Trap (Converts to S using plastic S-bend provided) Pan Fixing Screwed to the floor using brackets (supplied) and bedded with sealant Cistern Fixing Top-fix cistern bolted directly to the bowl Seat Matching top-fix, soft-close seat supplied with suite Water Inlet Back Inlet Inlet Valve Recommended max. working pressure 1000kPa Weight Pan: 33kg, Cistern: 10.7kg WELS 4 Star WELS Rating 4.5/3 litres dual flush 3.5 litres average flush Standards AS1172 To see the complete Roca range go to www.reece.com.au/bathrooms CLEANING RECOMMENDATIONS We recommend the use of soapy water or approved cleaners. This product should not be cleaned with abrasive materials. Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty Conditions. THE GAP CLOSE COUPLED BACK TO WALL BACK INLET COMFORT HEIGHT TOILET SUITE Dimensions are nominal measurements only 350 340 430 650 70 160 100 440 480 125-225 230 480 225 45 220 50 ø102 35 365 830 300 390 180 150 270 760 page 1 of 5 Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors. Tech Page Version 1 WaterMark AS 1172 WMKA 02321 ™ The more stars the more water efficient WATER RATING www.waterrating.gov.au In accordance with AS/NZS 6400 Licence No. 0137 Bathroom Products Australia 4.5 L per full flush / 3 L per half flush 3.5 litres average flush
Transcript of THE GAP CLOSE COUPLED BACK TO WALL BACK INLET … · THE GAP CLOSE COUPLED BACK TO WALL BACK INLET...
ROCA
SPECIFICATIONRecommended Use Domestic, hotel and commercial
Rim Configuration Box Rim
Bowl Configuration P Trap (Converts to S using plastic S-bend provided)
Pan Fixing Screwed to the floor using brackets (supplied) and bedded with sealant
Cistern Fixing Top-fix cistern bolted directly to the bowl
Seat Matching top-fix, soft-close seat supplied with suite
Water Inlet Back Inlet
Inlet Valve Recommended max. working pressure 1000kPa
Weight Pan: 33kg, Cistern: 10.7kg
WELS 4 Star WELS Rating
4.5/3 litres dual flush
3.5 litres average flush
Standards AS1172 To see the complete Roca range go to www.reece.com.au/bathrooms
CLEANING RECOMMENDATIONSWe recommend the use of soapy water or approved cleaners.
This product should not be cleaned with abrasive materials.
Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty Conditions.
THE GAP CLOSE COUPLED BACK TO WALL BACK INLET COMFORT HEIGHT TOILET SUITE
Dimensions are nominal measurements only
350
340
430650
70
160 100
440 480
125-225230
480
225
45220
50
ø10235
365
830
300
390
180
150
270
760
page 1 of 5
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors.
Tech Page Version 1
WaterMarkAS 1172
WMKA 02321
™
The more stars the more water efficient
WATER RATINGwww.waterrating.gov.au
In accordance with AS/NZS 6400
Licence No. 0137Bathroom Products Australia
4.5 L per full flush / 3 L per half flush
3.5 litres average flush
INSTALLATION INSTRUCTIONS
8
1
2
ROCATHE GAP CLOSE COUPLED BACK TO WALL BACK INLET COMFORT HEIGHT TOILET SUITE
page 2 of 5
195mm
18 19
16 17
20
21
22 23
ROCATHE GAP CLOSE COUPLED BACK TO WALL BACK INLET COMFORT HEIGHT TOILET SUITE
page 3 of 5
A82
2728
F0R
d
AH0007100r
1
21
2
1
2
2
1
60 mm
[email protected]@roca.net
roca Sanitario, S.A.Avda. Diagonal, 51308029 BarcelonaSPAINwww.roca.com
A82
2728
F0R
d
AH0007100r
1
21
2
1
2
2
1
60 mm
[email protected]@roca.net
roca Sanitario, S.A.Avda. Diagonal, 51308029 BarcelonaSPAINwww.roca.com
ROCATHE GAP CLOSE COUPLED BACK TO WALL BACK INLET COMFORT HEIGHT TOILET SUITE
page 4 of 5
Plumbers, please ensure a copy of the installation instructions is left with the end user for future reference
MAINTENANCE / REPLACEMENT OF OUTLET WASHER
PARTS
ROCATHE GAP CLOSE COUPLED BACK TO WALL BACK INLET COMFORT HEIGHT TOILET SUITE
page 5 of 5
760
440
100
1
3
4
2
5
225
180
AV0007000R
Min: 125Max: 225
9502798
760
440
100
1
3
4
2
5
225
180
AV0007000R
Min: 125Max: 225
9502798
1 - AH0001700R
2 - A822096400
3 - AH0000100R
4 - AV0028800R
5 - AV0009400R
Flush ButtonInlet ValveOutlet ValveCistern Fixing Kit
Pan Fixing Kit
Back Inlet Parts (Comfort Height)
