THE GAP BACK TO WALL TOILET SUITE...ROCA THE GAP BACK TO WALL TOILET SUITE SPECIFICATION Recommended...
5
ROCA THE GAP BACK TO WALL TOILET SUITE SPECIFICATION Recommended Use Domestic, hotel and commercial Rim Configuration Box Rim Bowl Configuration P Trap (Converts to S using plastic S-bend provided) Set Out P Trap: 180mm, S Trap: 125mm-225mm Pan Fixing Screwed to the floor using brackets (supplied) and bedded with sealant Cistern Fixing Top-fix cistern bolted directly to the bowl Seat Matching top-fix, soft-close, quick-release seat supplied with suite Water Inlet Back inlet, left hand side Cistern 4.5/3 litre dual flush Inlet Valve Recommended max. working pressure 1000kPa Weight Pan: 29.8kg, Cistern: 10.7kg WELS 4 Star WELS Rating Standards AS1172.1 and AS 1172.2 CLEANING RECOMMENDATIONS Soapy water or approved bathroom cleaners. This bathroom product should not be cleaned with abrasive materials. Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty Page for full Terms and Conditions. To see the complete Roca range go to www.reece.com.au/bathrooms WMKA 02321 365 340 650 400 225 440 150 Min 125 - Max 225 220 790 ~720 100 180 page 1 of 5 Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors. Tech Page Version 2 Dimensions are nominal only The more stars the more water efficient WATER RATING www.waterrating.gov.au In accordance with AS/NZS 6400 Licence No. 0137 Bathroom Products Australia 4.5 L per full flush / 3 L per half flush 3.5 litres average flush
Transcript of THE GAP BACK TO WALL TOILET SUITE...ROCA THE GAP BACK TO WALL TOILET SUITE SPECIFICATION Recommended...
ROCATHE GAP BACK TO WALL TOILET SUITE
SPECIFICATIONRecommended Use Domestic, hotel and commercial
Rim Configuration Box Rim
Bowl Configuration P Trap (Converts to S using plastic S-bend provided)
Set Out P Trap: 180mm, S Trap: 125mm-225mm
Pan Fixing Screwed to the floor using brackets (supplied) and bedded with sealant
Cistern Fixing Top-fix cistern bolted directly to the bowl
Seat Matching top-fix, soft-close, quick-release seat supplied with suite
Water Inlet Back inlet, left hand side
Cistern 4.5/3 litre dual flush
Inlet Valve Recommended max. working pressure 1000kPa
Weight Pan: 29.8kg, Cistern: 10.7kg
WELS 4 Star WELS Rating
Standards AS1172.1 and AS 1172.2
CLEANING RECOMMENDATIONSSoapy water or approved bathroom cleaners.
This bathroom product should not be cleaned with abrasive materials.
Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty Page for full Terms and
Conditions.
To see the complete Roca range go to www.reece.com.au/bathrooms
WMKA02321
365
340
650
400
225
440
150
Min 125 - Max 225
220
790~720
100
180
page 1 of 5
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors.
Tech Page Version 2
Dimensions are nominal only
The more stars the more water efficient
WATER RATINGwww.waterrating.gov.au
In accordance with AS/NZS 6400
Licence No. 0137Bathroom Products Australia
4.5 L per full flush / 3 L per half flush
3.5 litres average flush
ROCATHE GAP BACK TO WALL TOILET SUITE
INSTALLATION
HA
H
100
225
180
AV0007000r
Min: 125Max: 225
A34247W..r
A34247C..r
Product code
A34247W..r
A34247C..r
H400
440
HA720
760
1 - AH0001700r
2 - A822096400
3 - AH0000100r
4 - AV0028800r
5 - AV0009400r
1
3
4
2
5
The GAP BTWA34147T..r
page 2 of 5
ROCATHE GAP BACK TO WALL TOILET SUITE
INSTALLATION
8
Ø 5
1
2
page 3 of 5
ROCATHE GAP BACK TO WALL TOILET SUITE
INSTALLATION
195mm
18 19
16 17
20
21
22 23
page 4 of 5
ROCATHE GAP BACK TO WALL TOILET SUITE
A82
2728
F0R
d
AH0007100r
1
21
2
1
2
2
1
60 mm
[email protected]@roca.net
roca Sanitario, S.A.Avda. Diagonal, 51308029 BarcelonaSPAINwww.roca.com
page 5 of 5
Plumbers, please ensure a copy of the installation instructions is left with the end user for future reference
MAINTENANCE
