The Flat Rainwater Harvesting Tank - Premier Tech

8
Inspired by nature. Strong – light weight and long-lasting. Awarded Design 35 years warranty Complete systems for house and garden Program 2018 / 2019 The Flat Rainwater Harvesting Tank Applied for a patent

Transcript of The Flat Rainwater Harvesting Tank - Premier Tech

Page 1: The Flat Rainwater Harvesting Tank - Premier Tech

Inspired by nature. Strong – light weight and long-lasting.

Awarded Design

35 years warranty

Complete systems for house and garden

Program 2018 / 2019

The Flat Rainwater Harvesting Tank

Applied for a patent

Page 2: The Flat Rainwater Harvesting Tank - Premier Tech

2

Rainwater for House and GardenSave up to 50% of mains water and protect the environment

Rainwater for garden and domestic useChanging climate patterns suggest that temperatures are set to continue to rise - so using free rainwater to irrigate your garden on dry days is an ideal environmental and economic solution. But it isn’t just good for the garden. Using rainwater in your washing machine and to flush your WC will also reduce the amount of detergent and WC cleaner you need, as rainwater is softer than ordinary tap water so it will minimize limescale settlement.

• Harvesting rainwater can reduce mains water consumption by up to 50%

• It offers protection against rising water rates• Water shortages and hose pipe bans are not an issue• Less limescale - means appliances last longer• Naturally softer water reduces the amount of detergent required

Water - our most valuable resourceThe cost of mains water has increased significantly - more than other energy cost. This is likely to continue in the future. To provide clean mains water takes significant energy and with this, higher costs. So what makes more sense than a wor-thwhile single-investment using rainwater for up to half of your future water needs.

Save up to 50% of mains waterWhere mains water is used for garden irrigation, toilet flushing, washing clothes, rainwater can be used, thus saving up to 50% of precious water. From an annual average rainfall collected from a 80 m2 roof, four people could wash clothes, wash cars, flush the toilet and maintain a small garden, all year long.

Page 3: The Flat Rainwater Harvesting Tank - Premier Tech

3

Highest stability with a low weightThe NEO tank has a bionic design, modelled on the nautilus shell – which has a thin chambered shell but can withstand water pressure to depths of up to 800 m. The tank is not only distinguished by its very high stability, but also by a consider-ably lower weight than comparable flat tanks.

NEO is made from recyclable plastic and using 35% less material than previous tanks. This makes NEO particularly valuable ecologically in its production, transport and use.

Quality with 35 years warrantyPremier Tech Aqua manufactures NEO in Germany. You can select from individual tanks (1500 - 25000 l) and complete systems for the house and garden (1500 - 10000 l). Given the outstanding longevity of the NEO tank, Premier Tech Aqua offers you a 35 year warranty.

(The warranty only relates to the underground tank and not to individual parts or accessories, even if they are included in the price of the package.)

Inspired by nature, the NEO Tank is strong, light weight and long-lasting.

bionic Design

Quick and Easy InstallationInstallation is low cost and simple as our tanks are light weight and designed for shallow digs. This also makes the NEO ideal for both existing and new sites as disruption to the area is minimal.

Wide variety of applicationsSuitable for a wide variety of applications and available for do-mestic and commercial projects, the NEO Rainwater Harves-ting tanks are popular with manufacturers, schools, farms and public authorities.

winner

The NEO Flat Tank

Page 4: The Flat Rainwater Harvesting Tank - Premier Tech

4

Garden Complete-SystemsNEO Basic: With water distribution point in the tank cover

NEO Premium: With a convenient and practical Water Dispenser

1

2

34

5

7

6

Scope of delivery1 NEO flat tank 1500 - 10000 l2 TwinCover, Walk-On tank cover,

with water distribution point in the tank cover3 Shaft extension VS 20 4 Pluggable filter basket5 Overflow Siphon6 4 m Druckschlauch, zur Verbindung der Pumpe

zum Wasseranschluss in der Tankabdeckung7 Submersible pressure pump GARDENA

• Automatic switch-on and switch-off • 500 W • max. discharge 4000 l/h • max. discharge head 20 m

1

1

2

2

3

3 4

4

5

5

6

6 7

7 8

1

2

3

4

5

5

6

8

7

Scope of delivery1 NEO flat tank 1500 - 10000 l2 PE-Water Dispenser Premium, including tap,

storage for watering can and hose, installed on the TwinCover

3 Filter-Shaft FI-1, filter basket in PE-filter housing and calmed inlet (KG-pipe on site)

4 Overflow Siphon5 Shaft extension VS 20 6 TwinCover, Walk-On tank cover7 Submersible pressure pump GARDENA

• Automatic switch-on and switch-off • 500 W • max. discharge 4000 l/h • max. discharge head 20 m

NEO Basic Ordernr

1500 l RWNE1532

3000 l RWNE3032

5000 l RWNE5032

8000 l RWNE8032

10000 l RWNE1X32

NEO Basic Ordernr

1500 l RWNE1513

3000 l RWNE3013

5000 l RWNE5013

8000 l RWNE8013

10000 l RWNE1X13

Page 5: The Flat Rainwater Harvesting Tank - Premier Tech

5

What preparation is required? For a domestic house and garden system you will require a dedicated plumbing circuit to the toilet, washing machine and outside tap(s). This is most cost effective when a system is installed in a new build or major renovation. How does it work? Rainwater from your roof is diverted into the underground storage tank, where it is filtered, kept cool and dark for optimum quality. From the full tank the pressure pump (in the tank) pumps water to the outlet places (WC and washing machine). If the tank level is low, it can be manually filled with drinking water. Alternatively an automatic mains water top-up is available as an optional extra. Does it have to be located close to my property? The tank can be located up to 50 m away from the building, due to the high-performance submersible pressure pump diver.

Domestic Complete-Systems

Infiltration

NEO Diver: Pressure principle without mains water top up (optional accessory)

NEO McRain Ordernr

1500 l RWNE1552

3000 l RWNE3052

5000 l RWNE5052

8000 l RWNE8052

10000 l RWNE1X52

Scope of delivery1 NEO flat tank 1500 - 10000 l2 Submersible pressure pump diver, high-perfor-

mance submersible pressure pump with integrated automatic start and stop dry run protection

3 Filter-Shaft FI-2, PE-filter housing with Siphon, stainless steel split sieve and calmed inlet (KG-pipe on site)

4 Shaft extension VS 605 TopCover, Walk-On tank cover6 Labeling set

3

3

1

5

4

2

6

Recommended accessories: Automatic mains water top-up Ordernr RWZT9004

Recommended accessories: Air vent DN 100 Ordernr RWVS0003

1 2 3 4 5 6

Soakaway Igloo 900 l

An ideal solution to deal with tank overflow in rain-water harvesting systems.

Soakaway Igloo Ordernr

Igloo 900 l RWVS0900

Package 1800 l (2 x 900 l) RWVS1800

Package 2700 l (3 x 900 l) RWVS2700

Package 3600 l (4 x 900 l) RWVS3600

Package 4500 l (5 x 900 l) RWVS4500

Technical data: Volume: 900 l, measurements: Width 1537 mm, Height 814 mm, Material: polyethylene (PE), 2 Connections for inflow and coupling DN 110, Weight 30 kg

Advantages• Well-priced option for small and all sizes• High retention volume of 900 litre per soakaway igloo, substitutes approx.

4 Tonne gravel package• Compact, space-saving construction• High filtration capacity via base as well as side walls• Expandable (also retrospectively) at required• No fleece for the coating necessary

1 Soakaway Igloo2 Inflow3 Pre-filter4 Connection DN 110 (on side)5 Air vent pipe

2

3

1

14

5

Note: A pre-filter should always be installed with the soakaway igloo, to ensure no large dirt particles enter the drainage system. If the tank overflow of the NEO garden system is connected directly to the drainage, an additional filter is not required.

Page 6: The Flat Rainwater Harvesting Tank - Premier Tech

6

The right size for every need

Premier Tech Aqua offers you the right NEO tank for every need, based on the garden size, roof area and, if applicable, number of people in the household (PE).

1) Upper edge of access dome to base of pipe.

NEO flat tank 3,000 litresFor medium-sized gardens up to approx. 300 m2 and roof areas from 40 m2. For domestic use by ca. 2-3 persons.

NEO flat tank 1,500 litresFor smaller gardens up to approx. 100 m2 and roof areas from 20 m2. For domestic use by ca. 1-2 persons.

NEO flat tank 5,000 litresFor larger gardens up to approx. 500 m2 and roof areas from 70 m2. For domestic use by ca. 3-5 persons.

NEO flat tank 8,000 litresFor generous gardens up to approx. 1,000 m2 and roof areas from 90 m2. For domestic use by ca. 5-8 persons.

NEO flat tank 10,000 litresFor generous gardens up to approx. 1,500 m2 and roof areas from 100 m2. For domestic use by ca. 8-10 persons.

NEO flat tank 20,000 litresIdeal for large facilities.

NEO Flat Tank (1.500 to 25.000 litres)

Further sizes available on request

Equipment: 3 x DN 110 connections with seal for inflow, outflow and supply pipe

Tank Type Length WidthTank unit height

Height incl. access dome

Weight Inflow1) Outflow1) Order-No.

NEO 1500 l 1920 mm 1920 mm 750 mm 810 mm 50 kg 225 mm 275 mm RWNE1500

NEO 3000 l 2340 mm 2340 mm 1047 mm 1182 mm 110 kg 220 mm 270 mm RWNE3000

NEO 5000 l 3400 mm 2320 mm 1120 mm 1245 mm 170 kg 240 mm 290 mm RWNE5000

NEO 8000 l 4420 mm 2300 mm 1260 mm 1415 mm 280 kg 230 mm 270 mm RWNE8000

NEO 10000 l 5420 mm 2300 mm 1260 mm 1415 mm 340 kg 230 mm 270 mm RWNE10X0

NEO 15000 l 8020 mm 2300 mm 1260 mm 1415 mm 510 kg 230 mm 270 mm RWNE15X0

NEO 20000 l 10620 mm 2300 mm 1260 mm 1415 mm 660 kg 230 mm 270 mm RWNE20X0

NEO 25000 l 13220 mm 2300 mm 1260 mm 1415 mm 850 kg 230 mm 270 mm RWNE25X0

Page 7: The Flat Rainwater Harvesting Tank - Premier Tech

7

Shaft extension (for tank covers can be walked on)Extends the manhole for deeper underground installation

Order-No.

PE shaft extension VS 20, walk-on, height 25 cm, Ø 60 cm, extends by up to 20 cm RWDS0022

PE shaft extension VS 60, walk-on, height 63.5 cm, Ø 60 cm, extends by up to 60 cm RWDS0062

Spacer, for extending VS 20/VS 60, height 60 cm, Ø 60 cm RWDS0043

You can select individual components or benefit from the complete solutions found on the following pages.

Tank covers can be walked on Conform with DIN 1989, resilient to permanent loads of up to 150 kg

Order-No.

Thermo cover TopCover, walk-on, made from PE, double-walled, hence better frost protection, with child safety lock

RWDS0066

Thermo cover TwinCover, walk-on, made from PE, with integrated twin brass distribution points (click system), double-walled, with child safety lock

RWDS0067

Thermo cover TwinCover, walk-on, made from PE, with inner lid, double-walled, with child safety lock

RWDS0068

Designs that can be driven overMinimum soil cover 600 mm (passenger car) and/or 800 mm (truck).

Order-No.

Complete car set 1, maximum axle load 2.2 t, infinitely variable height adjustment, extensi-on 70-110 cm, consisting of steel cover, drive-over shaft BS 60 and spacer

RWDS0049

Complete car set 2, maximum axle load 2.2 t, extension 60 cm, consisting of steel cover and drive-over shaft BS 60

RWDS0059

Lorry Driveable (heavy truck load rating 30), maximum axle load 11.5 t, consisting of spacer, height 60 cm, class D coverage to be additionally provided by customer

RWDS0043

Spacer and cone for DN 800 dome opening Order-No.

Cone, transition piece for the DN 800 dome opening for reduction to DN 600, all DN 600 shafts and tank covers can be used on the cone. Height 40 cm.

RWDS1080

Spacer, DN 800, the comfortable shaft extension for more working space, extended by 38 cm.

RWDS2080

Sample assembly walk-on Sample assembly that cars can drive over

Sample shaft assemblies for NEO from 8000 L

Optional for NEO flat tanks from 8000 LOptionally second dome opening possible (8000 L in DN 600, from 10000 L in DN 600 or DN 800)

Car set 1

Cone

Walk-on cover VS 20 or VS 60

Spacer DN 800 optional

Cone

NEO Accessories

Page 8: The Flat Rainwater Harvesting Tank - Premier Tech

Other products from Premier Tech Aqua:

Easy Rainwater Management

Installation NEO tank Infiltration 10.000 l Installation NEO tank Rainwater Harvesting 3 x 20.000 l

Please ask us for more information.winner

3355

Suitable for a wide variety of domestic and commercial applications. NEO flat tanks (up to 25.000 l) can also be used as a retention tank or infiltration tank.

PREMIER TECH AQUA GmbHAm Gammgraben 219258 Boizenburg DEUTSCHLAND

+49 (0) 38847 6239-0+49 (0) 38847 6239-2130

[email protected]

The Flat Rainwater Harvesting Tank

Decentralised wastewater solutions• Wastewater treatment plants • Septic tanks• Cesspools