THE FINE ART OF FLOORINGimperialdecor.in/wp-content/uploads/2015/06/Mikasa-Range_461.pdfTHE FINE ART...
Transcript of THE FINE ART OF FLOORINGimperialdecor.in/wp-content/uploads/2015/06/Mikasa-Range_461.pdfTHE FINE ART...
THE FINE ART OF FLOORING
Excellence In Every LayerMikasa floors consist of three layers composed of Real Hard Wood, Stabilizing Core and
Balancing Layer. Put together using the most modern technology, this construction provides
solidity and stability to every plank while restricting the expansion and contraction of wood
and giving your floor the resilience to stand the test of time and climate.
A revolutionary technology that locks two planks together without using glue, ensuring that the
joints that bind the two planks never open up. allows for ease of installation, giving a
seamless look to your floor that withstands the effects of seasonal change and foot traffic.
The Bond That Lasts Forever
youtube.com/mikasafl oorstwitter.com/mikasafl oorsfacebook.com/mikasafl oors
Greenlam Industries Limited,1501-05, Narain Manzil, 23, Barakhamba Road, New Delhi 110001, IndiaT: +91-11-42791399 E: [email protected]
Due to printing limitations product colour and texture reproduced in this brochure may vary from actual product. We, recommend you to please refer actual product for exact grain patterns and shades.
www.mikasafl oors.com
Volume1
The Magic Of Real Wood. The Reassurance Of Technology.Greenlam Industries Limited. It has been beautifying spaces for years by infusing creativity into every piece of work and turning it into sheer pieces of beauty and brilliance. A name to be reckoned with in surfacing products in more than 100 countries, Greenlam Industries Limited is standing tall with its guiding philosophies of Innovative technologies and Creative solutions.
Carrying the legacy forward, Greenlam takes pleasure in presenting Mikasa, real wood floors, produced in India for the first time at its fully-integrated plant at Behror, Rajasthan.
Mikasa is inspired by wood. Each piece of wood, naturally beautiful, is further enhanced using the latest technology, thus bringing out the true character of the wood and presenting it to you in its full glory.
We create the finest floors. For those who have the finest taste.
Stabilising Core
Balancing Layer
Real Hard Wood
MikasaADDOur principles forsourcing wood fromacross the globe.
AVAILABILITY
To ensure you have access to most popular wood species from across the globe.
DESIGN
So that your floor becomes on integral
part of your total décor.
DURABILITY
To enhance the nature of wood by using
the latest technology.
Thickness (mm)
Veneer Thickness (mm)
Plank Dimensions (mm)
Configuration
Wood Species
No. of Planks / Pack
Sq.Mtrs / Pack
Weight / Pack (Kg)
Joint
Core Material
Finish
Warranty*
15
Up to 3.0
Width: 135-210 Length: 1800-2400
1, 2 & 3 Strips
Oak, Walnut, Maple Ash and other exotic species
06 Planks
1.46 m2 - 3.02 m2
12.80 -23.40
PlankLocTM, Glueless
Pine
Brushed, Matt and Satin
30 Years in a residential environment. Check for Warranty in commercial applications.
13
Up to 2.0
Width: 120 Length: 200
1 Strip
06 Planks
0.86 m2
10.80
High Density Fiber Board
20 Years in a residential environment. Check for Warranty in commercial applications.
10
Up to 0.6
Width: 120 Length: 1200
1 Strip
08 Planks
1.15 m2
9.85
High Density Fiber Board
10 Years in a residential environment. Check for Warranty in commercial applications.
TECHNICAL INFORMATION
PRODUCT CHARACTERISTICS
Boards are constructed in 3 layers in order to minimize expansion and contraction within the floorboard. The direction of the fibers within each layer is oriented at right angles to the adjacent layer.
The surface is pre-finished with several layers of UV hardened acrylic lacquer free from formaldehyde and solvents.
1-strip plank, with / without bevelled edge, MIKASA PlankLocTM glue free joint on all edges. Surface layer consists of sliced or rotary cut strips of hardwood and a backing of pine / spruce veneer.
1, 2 & 3-strip plank with / without bevelled edges. MIKASA PlankLocTM glue free joint on all edges. Surface layer consists of sliced strips of hardwood and a backing of pine / spruce veneer.
The top layer is made of select hardwood and is up to 3.0 mm in thickness. This allows resanding and refinishing atleast twice. Detailed information about maintenance is included in our Maintenance & Repair Guide. Download it from our website www.mikasafloors.com.
The top layer is made of hardwood and is up to 2.0 mm in thickness. This allows resanding and refinishing atleast once. Detailed information about maintenance is included in our Maintenance & Repair Guide. Download it from our website www.mikasafloors.com.
The top layer is made of hardwood and is up to 0.6 mm in thickness. This does not allow any resanding and refinishing The surface is pre-finished with several layers of UV hardened acrylic lacquer free from formaldehyde and solvents.
Average moisture content at delivery is approximately 7-9%.The boards are delivered free of insects, woodworms etc. This is secured by the process temperatures.
The boards comply more than adequately with the stringent EU E1 norms for formaldehyde emissions.
Wooden floors fulfill the requirements for class G, the highest fire classification for floors as per Swedish Building Code, BBR 94.
Resists most household stains up to 24 hours
Wood is a natural product and changes color with time when exposed to light
Floating / Glue down
Suitable for room temperature (max temperature 27°C), waterborne system or self-regulating electrical system.
The subfloor must be dry, clean, level and solid. The requirements in HusAMA98, Table 43.DC/-1 and MDB.3 apply. Also note our Subfloor Requirements. You can download more details on Subfloor Requirements and Underfloor Heating from our website www.mikasafloors.com.
FinishContent
Classifications
Heating Compatibility
THE FINE ART OF FLOORING
Excellence In Every LayerMikasa floors consist of three layers composed of Real Hard Wood, Stabilizing Core and
Balancing Layer. Put together using the most modern technology, this construction provides
solidity and stability to every plank while restricting the expansion and contraction of wood
and giving your floor the resilience to stand the test of time and climate.
A revolutionary technology that locks two planks together without using glue, ensuring that the
joints that bind the two planks never open up. allows for ease of installation, giving a
seamless look to your floor that withstands the effects of seasonal change and foot traffic.
The Bond That Lasts Forever
youtube.com/mikasafl oorstwitter.com/mikasafl oorsfacebook.com/mikasafl oors
Greenlam Industries Limited,1501-05, Narain Manzil, 23, Barakhamba Road, New Delhi 110001, IndiaT: +91-11-42791399 E: [email protected]
Due to printing limitations product colour and texture reproduced in this brochure may vary from actual product. We, recommend you to please refer actual product for exact grain patterns and shades.
www.mikasafl oors.com
Volume1
The Magic Of Real Wood. The Reassurance Of Technology.Greenlam Industries Limited. It has been beautifying spaces for years by infusing creativity into every piece of work and turning it into sheer pieces of beauty and brilliance. A name to be reckoned with in surfacing products in more than 100 countries, Greenlam Industries Limited is standing tall with its guiding philosophies of Innovative technologies and Creative solutions.
Carrying the legacy forward, Greenlam takes pleasure in presenting Mikasa, real wood floors, produced in India for the first time at its fully-integrated plant at Behror, Rajasthan.
Mikasa is inspired by wood. Each piece of wood, naturally beautiful, is further enhanced using the latest technology, thus bringing out the true character of the wood and presenting it to you in its full glory.
We create the finest floors. For those who have the finest taste.
Stabilising Core
Balancing Layer
Real Hard Wood
MikasaADDOur principles forsourcing wood fromacross the globe.
AVAILABILITY
To ensure you have access to most popular wood species from across the globe.
DESIGN
So that your floor becomes on integral
part of your total décor.
DURABILITY
To enhance the nature of wood by using
the latest technology.
Thickness (mm)
Veneer Thickness (mm)
Plank Dimensions (mm)
Configuration
Wood Species
No. of Planks / Pack
Sq.Mtrs / Pack
Weight / Pack (Kg)
Joint
Core Material
Finish
Warranty*
15
Up to 3.0
Width: 135-210 Length: 1800-2400
1, 2 & 3 Strips
Oak, Walnut, Maple Ash and other exotic species
06 Planks
1.46 m2 - 3.02 m2
12.80 -23.40
PlankLocTM, Glueless
Pine
Brushed, Matt and Satin
30 Years in a residential environment. Check for Warranty in commercial applications.
13
Up to 2.0
Width: 120 Length: 200
1 Strip
06 Planks
0.86 m2
10.80
High Density Fiber Board
20 Years in a residential environment. Check for Warranty in commercial applications.
10
Up to 0.6
Width: 120 Length: 1200
1 Strip
08 Planks
1.15 m2
9.85
High Density Fiber Board
10 Years in a residential environment. Check for Warranty in commercial applications.
TECHNICAL INFORMATION
PRODUCT CHARACTERISTICS
Boards are constructed in 3 layers in order to minimize expansion and contraction within the floorboard. The direction of the fibers within each layer is oriented at right angles to the adjacent layer.
The surface is pre-finished with several layers of UV hardened acrylic lacquer free from formaldehyde and solvents.
1-strip plank, with / without bevelled edge, MIKASA PlankLocTM glue free joint on all edges. Surface layer consists of sliced or rotary cut strips of hardwood and a backing of pine / spruce veneer.
1, 2 & 3-strip plank with / without bevelled edges. MIKASA PlankLocTM glue free joint on all edges. Surface layer consists of sliced strips of hardwood and a backing of pine / spruce veneer.
The top layer is made of select hardwood and is up to 3.0 mm in thickness. This allows resanding and refinishing atleast twice. Detailed information about maintenance is included in our Maintenance & Repair Guide. Download it from our website www.mikasafloors.com.
The top layer is made of hardwood and is up to 2.0 mm in thickness. This allows resanding and refinishing atleast once. Detailed information about maintenance is included in our Maintenance & Repair Guide. Download it from our website www.mikasafloors.com.
The top layer is made of hardwood and is up to 0.6 mm in thickness. This does not allow any resanding and refinishing The surface is pre-finished with several layers of UV hardened acrylic lacquer free from formaldehyde and solvents.
Average moisture content at delivery is approximately 7-9%.The boards are delivered free of insects, woodworms etc. This is secured by the process temperatures.
The boards comply more than adequately with the stringent EU E1 norms for formaldehyde emissions.
Wooden floors fulfill the requirements for class G, the highest fire classification for floors as per Swedish Building Code, BBR 94.
Resists most household stains up to 24 hours
Wood is a natural product and changes color with time when exposed to light
Floating / Glue down
Suitable for room temperature (max temperature 27°C), waterborne system or self-regulating electrical system.
The subfloor must be dry, clean, level and solid. The requirements in HusAMA98, Table 43.DC/-1 and MDB.3 apply. Also note our Subfloor Requirements. You can download more details on Subfloor Requirements and Underfloor Heating from our website www.mikasafloors.com.
FinishContent
Classifications
Heating Compatibility
THE FINE ART OF FLOORING
Excellence In Every LayerMikasa floors consist of three layers composed of Real Hard Wood, Stabilizing Core and
Balancing Layer. Put together using the most modern technology, this construction provides
solidity and stability to every plank while restricting the expansion and contraction of wood
and giving your floor the resilience to stand the test of time and climate.
A revolutionary technology that locks two planks together without using glue, ensuring that the
joints that bind the two planks never open up. allows for ease of installation, giving a
seamless look to your floor that withstands the effects of seasonal change and foot traffic.
The Bond That Lasts Forever
youtube.com/mikasafl oorstwitter.com/mikasafl oorsfacebook.com/mikasafl oors
Greenlam Industries Limited,1501-05, Narain Manzil, 23, Barakhamba Road, New Delhi 110001, IndiaT: +91-11-42791399 E: [email protected]
Due to printing limitations product colour and texture reproduced in this brochure may vary from actual product. We, recommend you to please refer actual product for exact grain patterns and shades.
www.mikasafl oors.com
Volume1
The Magic Of Real Wood. The Reassurance Of Technology.Greenlam Industries Limited. It has been beautifying spaces for years by infusing creativity into every piece of work and turning it into sheer pieces of beauty and brilliance. A name to be reckoned with in surfacing products in more than 100 countries, Greenlam Industries Limited is standing tall with its guiding philosophies of Innovative technologies and Creative solutions.
Carrying the legacy forward, Greenlam takes pleasure in presenting Mikasa, real wood floors, produced in India for the first time at its fully-integrated plant at Behror, Rajasthan.
Mikasa is inspired by wood. Each piece of wood, naturally beautiful, is further enhanced using the latest technology, thus bringing out the true character of the wood and presenting it to you in its full glory.
We create the finest floors. For those who have the finest taste.
Stabilising Core
Balancing Layer
Real Hard Wood
MikasaADDOur principles forsourcing wood fromacross the globe.
AVAILABILITY
To ensure you have access to most popular wood species from across the globe.
DESIGN
So that your floor becomes on integral
part of your total décor.
DURABILITY
To enhance the nature of wood by using
the latest technology.
Thickness (mm)
Veneer Thickness (mm)
Plank Dimensions (mm)
Configuration
Wood Species
No. of Planks / Pack
Sq.Mtrs / Pack
Weight / Pack (Kg)
Joint
Core Material
Finish
Warranty*
15
Up to 3.0
Width: 135-210 Length: 1800-2400
1, 2 & 3 Strips
Oak, Walnut, Maple Ash and other exotic species
06 Planks
1.46 m2 - 3.02 m2
12.80 -23.40
PlankLocTM, Glueless
Pine
Brushed, Matt and Satin
30 Years in a residential environment. Check for Warranty in commercial applications.
13
Up to 2.0
Width: 120 Length: 200
1 Strip
06 Planks
0.86 m2
10.80
High Density Fiber Board
20 Years in a residential environment. Check for Warranty in commercial applications.
10
Up to 0.6
Width: 120 Length: 1200
1 Strip
08 Planks
1.15 m2
9.85
High Density Fiber Board
10 Years in a residential environment. Check for Warranty in commercial applications.
TECHNICAL INFORMATION
PRODUCT CHARACTERISTICS
Boards are constructed in 3 layers in order to minimize expansion and contraction within the floorboard. The direction of the fibers within each layer is oriented at right angles to the adjacent layer.
The surface is pre-finished with several layers of UV hardened acrylic lacquer free from formaldehyde and solvents.
1-strip plank, with / without bevelled edge, MIKASA PlankLocTM glue free joint on all edges. Surface layer consists of sliced or rotary cut strips of hardwood and a backing of pine / spruce veneer.
1, 2 & 3-strip plank with / without bevelled edges. MIKASA PlankLocTM glue free joint on all edges. Surface layer consists of sliced strips of hardwood and a backing of pine / spruce veneer.
The top layer is made of select hardwood and is up to 3.0 mm in thickness. This allows resanding and refinishing atleast twice. Detailed information about maintenance is included in our Maintenance & Repair Guide. Download it from our website www.mikasafloors.com.
The top layer is made of hardwood and is up to 2.0 mm in thickness. This allows resanding and refinishing atleast once. Detailed information about maintenance is included in our Maintenance & Repair Guide. Download it from our website www.mikasafloors.com.
The top layer is made of hardwood and is up to 0.6 mm in thickness. This does not allow any resanding and refinishing The surface is pre-finished with several layers of UV hardened acrylic lacquer free from formaldehyde and solvents.
Average moisture content at delivery is approximately 7-9%.The boards are delivered free of insects, woodworms etc. This is secured by the process temperatures.
The boards comply more than adequately with the stringent EU E1 norms for formaldehyde emissions.
Wooden floors fulfill the requirements for class G, the highest fire classification for floors as per Swedish Building Code, BBR 94.
Resists most household stains up to 24 hours
Wood is a natural product and changes color with time when exposed to light
Floating / Glue down
Suitable for room temperature (max temperature 27°C), waterborne system or self-regulating electrical system.
The subfloor must be dry, clean, level and solid. The requirements in HusAMA98, Table 43.DC/-1 and MDB.3 apply. Also note our Subfloor Requirements. You can download more details on Subfloor Requirements and Underfloor Heating from our website www.mikasafloors.com.
FinishContent
Classifications
Heating Compatibility
THE FINE ART OF FLOORING
Excellence In Every LayerMikasa floors consist of three layers composed of Real Hard Wood, Stabilizing Core and
Balancing Layer. Put together using the most modern technology, this construction provides
solidity and stability to every plank while restricting the expansion and contraction of wood
and giving your floor the resilience to stand the test of time and climate.
A revolutionary technology that locks two planks together without using glue, ensuring that the
joints that bind the two planks never open up. allows for ease of installation, giving a
seamless look to your floor that withstands the effects of seasonal change and foot traffic.
The Bond That Lasts Forever
youtube.com/mikasafl oorstwitter.com/mikasafl oorsfacebook.com/mikasafl oors
Greenlam Industries Limited,1501-05, Narain Manzil, 23, Barakhamba Road, New Delhi 110001, IndiaT: +91-11-42791399 E: [email protected]
Due to printing limitations product colour and texture reproduced in this brochure may vary from actual product. We, recommend you to please refer actual product for exact grain patterns and shades.
www.mikasafl oors.com
Volume1
The Magic Of Real Wood. The Reassurance Of Technology.Greenlam Industries Limited. It has been beautifying spaces for years by infusing creativity into every piece of work and turning it into sheer pieces of beauty and brilliance. A name to be reckoned with in surfacing products in more than 100 countries, Greenlam Industries Limited is standing tall with its guiding philosophies of Innovative technologies and Creative solutions.
Carrying the legacy forward, Greenlam takes pleasure in presenting Mikasa, real wood floors, produced in India for the first time at its fully-integrated plant at Behror, Rajasthan.
Mikasa is inspired by wood. Each piece of wood, naturally beautiful, is further enhanced using the latest technology, thus bringing out the true character of the wood and presenting it to you in its full glory.
We create the finest floors. For those who have the finest taste.
Stabilising Core
Balancing Layer
Real Hard Wood
MikasaADDOur principles forsourcing wood fromacross the globe.
AVAILABILITY
To ensure you have access to most popular wood species from across the globe.
DESIGN
So that your floor becomes on integral
part of your total décor.
DURABILITY
To enhance the nature of wood by using
the latest technology.
Thickness (mm)
Veneer Thickness (mm)
Plank Dimensions (mm)
Configuration
Wood Species
No. of Planks / Pack
Sq.Mtrs / Pack
Weight / Pack (Kg)
Joint
Core Material
Finish
Warranty*
15
Up to 3.0
Width: 135-210 Length: 1800-2400
1, 2 & 3 Strips
Oak, Walnut, Maple Ash and other exotic species
06 Planks
1.46 m2 - 3.02 m2
12.80 -23.40
PlankLocTM, Glueless
Pine
Brushed, Matt and Satin
30 Years in a residential environment. Check for Warranty in commercial applications.
13
Up to 2.0
Width: 120 Length: 200
1 Strip
06 Planks
0.86 m2
10.80
High Density Fiber Board
20 Years in a residential environment. Check for Warranty in commercial applications.
10
Up to 0.6
Width: 120 Length: 1200
1 Strip
08 Planks
1.15 m2
9.85
High Density Fiber Board
10 Years in a residential environment. Check for Warranty in commercial applications.
TECHNICAL INFORMATION
PRODUCT CHARACTERISTICS
Boards are constructed in 3 layers in order to minimize expansion and contraction within the floorboard. The direction of the fibers within each layer is oriented at right angles to the adjacent layer.
The surface is pre-finished with several layers of UV hardened acrylic lacquer free from formaldehyde and solvents.
1-strip plank, with / without bevelled edge, MIKASA PlankLocTM glue free joint on all edges. Surface layer consists of sliced or rotary cut strips of hardwood and a backing of pine / spruce veneer.
1, 2 & 3-strip plank with / without bevelled edges. MIKASA PlankLocTM glue free joint on all edges. Surface layer consists of sliced strips of hardwood and a backing of pine / spruce veneer.
The top layer is made of select hardwood and is up to 3.0 mm in thickness. This allows resanding and refinishing atleast twice. Detailed information about maintenance is included in our Maintenance & Repair Guide. Download it from our website www.mikasafloors.com.
The top layer is made of hardwood and is up to 2.0 mm in thickness. This allows resanding and refinishing atleast once. Detailed information about maintenance is included in our Maintenance & Repair Guide. Download it from our website www.mikasafloors.com.
The top layer is made of hardwood and is up to 0.6 mm in thickness. This does not allow any resanding and refinishing The surface is pre-finished with several layers of UV hardened acrylic lacquer free from formaldehyde and solvents.
Average moisture content at delivery is approximately 7-9%.The boards are delivered free of insects, woodworms etc. This is secured by the process temperatures.
The boards comply more than adequately with the stringent EU E1 norms for formaldehyde emissions.
Wooden floors fulfill the requirements for class G, the highest fire classification for floors as per Swedish Building Code, BBR 94.
Resists most household stains up to 24 hours
Wood is a natural product and changes color with time when exposed to light
Floating / Glue down
Suitable for room temperature (max temperature 27°C), waterborne system or self-regulating electrical system.
The subfloor must be dry, clean, level and solid. The requirements in HusAMA98, Table 43.DC/-1 and MDB.3 apply. Also note our Subfloor Requirements. You can download more details on Subfloor Requirements and Underfloor Heating from our website www.mikasafloors.com.
FinishContent
Classifications
Heating Compatibility
THE FINE ART OF FLOORING
Excellence In Every LayerMikasa floors consist of three layers composed of Real Hard Wood, Stabilizing Core and
Balancing Layer. Put together using the most modern technology, this construction provides
solidity and stability to every plank while restricting the expansion and contraction of wood
and giving your floor the resilience to stand the test of time and climate.
A revolutionary technology that locks two planks together without using glue, ensuring that the
joints that bind the two planks never open up. allows for ease of installation, giving a
seamless look to your floor that withstands the effects of seasonal change and foot traffic.
The Bond That Lasts Forever
youtube.com/mikasafl oorstwitter.com/mikasafl oorsfacebook.com/mikasafl oors
Greenlam Industries Limited,1501-05, Narain Manzil, 23, Barakhamba Road, New Delhi 110001, IndiaT: +91-11-42791399 E: [email protected]
Due to printing limitations product colour and texture reproduced in this brochure may vary from actual product. We, recommend you to please refer actual product for exact grain patterns and shades.
www.mikasafl oors.com
Volume1
The Magic Of Real Wood. The Reassurance Of Technology.Greenlam Industries Limited. It has been beautifying spaces for years by infusing creativity into every piece of work and turning it into sheer pieces of beauty and brilliance. A name to be reckoned with in surfacing products in more than 100 countries, Greenlam Industries Limited is standing tall with its guiding philosophies of Innovative technologies and Creative solutions.
Carrying the legacy forward, Greenlam takes pleasure in presenting Mikasa, real wood floors, produced in India for the first time at its fully-integrated plant at Behror, Rajasthan.
Mikasa is inspired by wood. Each piece of wood, naturally beautiful, is further enhanced using the latest technology, thus bringing out the true character of the wood and presenting it to you in its full glory.
We create the finest floors. For those who have the finest taste.
Stabilising Core
Balancing Layer
Real Hard Wood
MikasaADDOur principles forsourcing wood fromacross the globe.
AVAILABILITY
To ensure you have access to most popular wood species from across the globe.
DESIGN
So that your floor becomes on integral
part of your total décor.
DURABILITY
To enhance the nature of wood by using
the latest technology.
Thickness (mm)
Veneer Thickness (mm)
Plank Dimensions (mm)
Configuration
Wood Species
No. of Planks / Pack
Sq.Mtrs / Pack
Weight / Pack (Kg)
Joint
Core Material
Finish
Warranty*
15
Up to 3.0
Width: 135-210 Length: 1800-2400
1, 2 & 3 Strips
Oak, Walnut, Maple Ash and other exotic species
06 Planks
1.46 m2 - 3.02 m2
12.80 -23.40
PlankLocTM, Glueless
Pine
Brushed, Matt and Satin
30 Years in a residential environment. Check for Warranty in commercial applications.
13
Up to 2.0
Width: 120 Length: 200
1 Strip
06 Planks
0.86 m2
10.80
High Density Fiber Board
20 Years in a residential environment. Check for Warranty in commercial applications.
10
Up to 0.6
Width: 120 Length: 1200
1 Strip
08 Planks
1.15 m2
9.85
High Density Fiber Board
10 Years in a residential environment. Check for Warranty in commercial applications.
TECHNICAL INFORMATION
PRODUCT CHARACTERISTICS
Boards are constructed in 3 layers in order to minimize expansion and contraction within the floorboard. The direction of the fibers within each layer is oriented at right angles to the adjacent layer.
The surface is pre-finished with several layers of UV hardened acrylic lacquer free from formaldehyde and solvents.
1-strip plank, with / without bevelled edge, MIKASA PlankLocTM glue free joint on all edges. Surface layer consists of sliced or rotary cut strips of hardwood and a backing of pine / spruce veneer.
1, 2 & 3-strip plank with / without bevelled edges. MIKASA PlankLocTM glue free joint on all edges. Surface layer consists of sliced strips of hardwood and a backing of pine / spruce veneer.
The top layer is made of select hardwood and is up to 3.0 mm in thickness. This allows resanding and refinishing atleast twice. Detailed information about maintenance is included in our Maintenance & Repair Guide. Download it from our website www.mikasafloors.com.
The top layer is made of hardwood and is up to 2.0 mm in thickness. This allows resanding and refinishing atleast once. Detailed information about maintenance is included in our Maintenance & Repair Guide. Download it from our website www.mikasafloors.com.
The top layer is made of hardwood and is up to 0.6 mm in thickness. This does not allow any resanding and refinishing The surface is pre-finished with several layers of UV hardened acrylic lacquer free from formaldehyde and solvents.
Average moisture content at delivery is approximately 7-9%.The boards are delivered free of insects, woodworms etc. This is secured by the process temperatures.
The boards comply more than adequately with the stringent EU E1 norms for formaldehyde emissions.
Wooden floors fulfill the requirements for class G, the highest fire classification for floors as per Swedish Building Code, BBR 94.
Resists most household stains up to 24 hours
Wood is a natural product and changes color with time when exposed to light
Floating / Glue down
Suitable for room temperature (max temperature 27°C), waterborne system or self-regulating electrical system.
The subfloor must be dry, clean, level and solid. The requirements in HusAMA98, Table 43.DC/-1 and MDB.3 apply. Also note our Subfloor Requirements. You can download more details on Subfloor Requirements and Underfloor Heating from our website www.mikasafloors.com.
FinishContent
Classifications
Heating Compatibility
THE FINE ART OF FLOORING
Excellence In Every LayerMikasa floors consist of three layers composed of Real Hard Wood, Stabilizing Core and
Balancing Layer. Put together using the most modern technology, this construction provides
solidity and stability to every plank while restricting the expansion and contraction of wood
and giving your floor the resilience to stand the test of time and climate.
A revolutionary technology that locks two planks together without using glue, ensuring that the
joints that bind the two planks never open up. allows for ease of installation, giving a
seamless look to your floor that withstands the effects of seasonal change and foot traffic.
The Bond That Lasts Forever
youtube.com/mikasafl oorstwitter.com/mikasafl oorsfacebook.com/mikasafl oors
Greenlam Industries Limited,1501-05, Narain Manzil, 23, Barakhamba Road, New Delhi 110001, IndiaT: +91-11-42791399 E: [email protected]
Due to printing limitations product colour and texture reproduced in this brochure may vary from actual product. We, recommend you to please refer actual product for exact grain patterns and shades.
www.mikasafl oors.com
Volume1
The Magic Of Real Wood. The Reassurance Of Technology.Greenlam Industries Limited. It has been beautifying spaces for years by infusing creativity into every piece of work and turning it into sheer pieces of beauty and brilliance. A name to be reckoned with in surfacing products in more than 100 countries, Greenlam Industries Limited is standing tall with its guiding philosophies of Innovative technologies and Creative solutions.
Carrying the legacy forward, Greenlam takes pleasure in presenting Mikasa, real wood floors, produced in India for the first time at its fully-integrated plant at Behror, Rajasthan.
Mikasa is inspired by wood. Each piece of wood, naturally beautiful, is further enhanced using the latest technology, thus bringing out the true character of the wood and presenting it to you in its full glory.
We create the finest floors. For those who have the finest taste.
Stabilising Core
Balancing Layer
Real Hard Wood
MikasaADDOur principles forsourcing wood fromacross the globe.
AVAILABILITY
To ensure you have access to most popular wood species from across the globe.
DESIGN
So that your floor becomes on integral
part of your total décor.
DURABILITY
To enhance the nature of wood by using
the latest technology.
Thickness (mm)
Veneer Thickness (mm)
Plank Dimensions (mm)
Configuration
Wood Species
No. of Planks / Pack
Sq.Mtrs / Pack
Weight / Pack (Kg)
Joint
Core Material
Finish
Warranty*
15
Up to 3.0
Width: 135-210 Length: 1800-2400
1, 2 & 3 Strips
Oak, Walnut, Maple Ash and other exotic species
06 Planks
1.46 m2 - 3.02 m2
12.80 -23.40
PlankLocTM, Glueless
Pine
Brushed, Matt and Satin
30 Years in a residential environment. Check for Warranty in commercial applications.
13
Up to 2.0
Width: 120 Length: 200
1 Strip
06 Planks
0.86 m2
10.80
High Density Fiber Board
20 Years in a residential environment. Check for Warranty in commercial applications.
10
Up to 0.6
Width: 120 Length: 1200
1 Strip
08 Planks
1.15 m2
9.85
High Density Fiber Board
10 Years in a residential environment. Check for Warranty in commercial applications.
TECHNICAL INFORMATION
PRODUCT CHARACTERISTICS
Boards are constructed in 3 layers in order to minimize expansion and contraction within the floorboard. The direction of the fibers within each layer is oriented at right angles to the adjacent layer.
The surface is pre-finished with several layers of UV hardened acrylic lacquer free from formaldehyde and solvents.
1-strip plank, with / without bevelled edge, MIKASA PlankLocTM glue free joint on all edges. Surface layer consists of sliced or rotary cut strips of hardwood and a backing of pine / spruce veneer.
1, 2 & 3-strip plank with / without bevelled edges. MIKASA PlankLocTM glue free joint on all edges. Surface layer consists of sliced strips of hardwood and a backing of pine / spruce veneer.
The top layer is made of select hardwood and is up to 3.0 mm in thickness. This allows resanding and refinishing atleast twice. Detailed information about maintenance is included in our Maintenance & Repair Guide. Download it from our website www.mikasafloors.com.
The top layer is made of hardwood and is up to 2.0 mm in thickness. This allows resanding and refinishing atleast once. Detailed information about maintenance is included in our Maintenance & Repair Guide. Download it from our website www.mikasafloors.com.
The top layer is made of hardwood and is up to 0.6 mm in thickness. This does not allow any resanding and refinishing The surface is pre-finished with several layers of UV hardened acrylic lacquer free from formaldehyde and solvents.
Average moisture content at delivery is approximately 7-9%.The boards are delivered free of insects, woodworms etc. This is secured by the process temperatures.
The boards comply more than adequately with the stringent EU E1 norms for formaldehyde emissions.
Wooden floors fulfill the requirements for class G, the highest fire classification for floors as per Swedish Building Code, BBR 94.
Resists most household stains up to 24 hours
Wood is a natural product and changes color with time when exposed to light
Floating / Glue down
Suitable for room temperature (max temperature 27°C), waterborne system or self-regulating electrical system.
The subfloor must be dry, clean, level and solid. The requirements in HusAMA98, Table 43.DC/-1 and MDB.3 apply. Also note our Subfloor Requirements. You can download more details on Subfloor Requirements and Underfloor Heating from our website www.mikasafloors.com.
FinishContent
Classifications
Heating Compatibility
WARRANTY
YEARS30
Thickness: Top Layer (Veneer) - 3mm Middle Layer (Pine) - 10mm Balancing Veneer - 2mm
WAR
RANTY
YEARS20
Thickness: Top Layer (Veneer) - 2mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 2mm
WAR
RANTY
YEARS10
Thickness: Top Layer (Veneer) - 0.6mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 0.6mm
CITY Oak Berlin
A B C D E
CITY Oak Frankfurt
G
CITY Oak London
B C D E
CITY Oak Vienna
B C D E
CITY Oak Stockholm
A B C D E
CITY Oak Koln
G
CITY Oak Malmoe'
H
CITY Oak Munchen
G
CITY Oak Salzburg
G
CITY Oak Copenhagen
H
CITY Oak Helsinki
H
CITY Oak Nice
H
PALACE Oak Earth
A B C D E EA B C D
PALACE Oak Noir
A B C D E
PALACE Oak Radiant
MANOR Oak Topaz
H
MANOR Oak Amber
H H
MANOR Oak Garnet
H
MANOR Oak Opal
G
ESTATE Oak Sea Shell
ESTATE Oak Fog
G
PALACE Oak Sea Mist
A B C D E G
ESTATE Oak Granit
G
ESTATE Oak Sand ESTATE Oak Steine
G
C E
VERMONT Noce Imperial
G
VERMONT Noce Medio VERMONT Noce Claret
C E
VERMONT Noce Piccolo
H C E
VERMONT Noce Rosso
H
VERMONT Noce Lila VERMONTCanadian Hard Maple
HG
VERMONT Noce Rose
G
SKÅNE Ash Ivory
G
SKÅNE Ash Stardust
A B C D E F G H2400 x 210 (mm)1 Strip
2100 x 185 (mm)1 Strip
2100 x 135 (mm)1 Strip
1800 x 185 (mm)1 Strip
1800 x 135 (mm)1 Strip
1200 x 120 (mm)1 Strip
2400 x 185 (mm)2 Strips
2400 x 195 (mm)3 Strips
Stained Brushed Matt Lacquer Satin Lacquer Smoked Bevelled Edge Micro-Bevelled Edge Square Edge
QUICK REFERENCE GUIDE
C E
VERMONT Noce GrandeFUMOIR Oak Fume
A B C D E
FUMOIR Oak Smokehouse
A B C D EH
MANOR Oak Pearl FUMOIR Oak Moss
H
ROVERE Oak Bronze
FF
ROVERE Oak Choco
F
ROVERE Oak CopperROVERE Oak Glace
F
ROVERE Oak Silver
F
ECLECTIC Ash Fressno
F
ECLECTIC Nussbaum
F
ECLECTIC Nussbaum Roja
F
ECLECTIC Wenge
F
ECLECTIC Wenge Rustico
F
ROVERE Oak Prime
F
ROVERE Oak Native
F
ROVERE Smoked Oak
F
F
EICHE Oak Cigar
F
EICHE Oak Espresso EICHE Oak Tobacco
F
EXOTICSAmerican Walnut Naturale
F
EXOTICSSucupira Naturale
F
EICHE Oak Cappuccino
FF
EICHE Oak CrèmeEICHE Oak Nature
F
EICHE Oak Naturale
F
EXOTICS Smoked Sapele
F
EXOTICS Sapele Naturale
F
EXOTICSMyrtle Naturale
F
EXOTICS Smoked Ash
F
EXOTICSPanga Panga Naturale
F
WAR
RANTY
YEARS30
Thickness: Top Layer (Veneer) - 3mm Middle Layer (Pine) - 10mm Balancing Veneer - 2mm
WAR
RANTY
YEARS20
Thickness: Top Layer (Veneer) - 2mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 2mm
WAR
RANTY
YEARS10
Thickness: Top Layer (Veneer) - 0.6mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 0.6mm
CITY Oak Berlin
A B C D E
CITY Oak Frankfurt
G
CITY Oak London
B C D E
CITY Oak Vienna
B C D E
CITY Oak Stockholm
A B C D E
CITY Oak Koln
G
CITY Oak Malmoe'
H
CITY Oak Munchen
G
CITY Oak Salzburg
G
CITY Oak Copenhagen
H
CITY Oak Helsinki
H
CITY Oak Nice
H
PALACE Oak Earth
A B C D E EA B C D
PALACE Oak Noir
A B C D E
PALACE Oak Radiant
MANOR Oak Topaz
H
MANOR Oak Amber
H H
MANOR Oak Garnet
H
MANOR Oak Opal
G
ESTATE Oak Sea Shell
ESTATE Oak Fog
G
PALACE Oak Sea Mist
A B C D E G
ESTATE Oak Granit
G
ESTATE Oak Sand ESTATE Oak Steine
G
C E
VERMONT Noce Imperial
G
VERMONT Noce Medio VERMONT Noce Claret
C E
VERMONT Noce Piccolo
H C E
VERMONT Noce Rosso
H
VERMONT Noce Lila VERMONTCanadian Hard Maple
HG
VERMONT Noce Rose
G
SKÅNE Ash Ivory
G
SKÅNE Ash Stardust
A B C D E F G H2400 x 210 (mm)1 Strip
2100 x 185 (mm)1 Strip
2100 x 135 (mm)1 Strip
1800 x 185 (mm)1 Strip
1800 x 135 (mm)1 Strip
1200 x 120 (mm)1 Strip
2400 x 185 (mm)2 Strips
2400 x 195 (mm)3 Strips
Stained Brushed Matt Lacquer Satin Lacquer Smoked Bevelled Edge Micro-Bevelled Edge Square Edge
QUICK REFERENCE GUIDE
C E
VERMONT Noce GrandeFUMOIR Oak Fume
A B C D E
FUMOIR Oak Smokehouse
A B C D EH
MANOR Oak Pearl FUMOIR Oak Moss
H
ROVERE Oak Bronze
FF
ROVERE Oak Choco
F
ROVERE Oak CopperROVERE Oak Glace
F
ROVERE Oak Silver
F
ECLECTIC Ash Fressno
F
ECLECTIC Nussbaum
F
ECLECTIC Nussbaum Roja
F
ECLECTIC Wenge
F
ECLECTIC Wenge Rustico
F
ROVERE Oak Prime
F
ROVERE Oak Native
F
ROVERE Smoked Oak
F
F
EICHE Oak Cigar
F
EICHE Oak Espresso EICHE Oak Tobacco
F
EXOTICSAmerican Walnut Naturale
F
EXOTICSSucupira Naturale
F
EICHE Oak Cappuccino
FF
EICHE Oak CrèmeEICHE Oak Nature
F
EICHE Oak Naturale
F
EXOTICS Smoked Sapele
F
EXOTICS Sapele Naturale
F
EXOTICSMyrtle Naturale
F
EXOTICS Smoked Ash
F
EXOTICSPanga Panga Naturale
F
WAR
RANTY
YEARS30
Thickness: Top Layer (Veneer) - 3mm Middle Layer (Pine) - 10mm Balancing Veneer - 2mm
WAR
RANTY
YEARS20
Thickness: Top Layer (Veneer) - 2mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 2mm
WAR
RANTY
YEARS10
Thickness: Top Layer (Veneer) - 0.6mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 0.6mm
CITY Oak Berlin
A B C D E
CITY Oak Frankfurt
G
CITY Oak London
B C D E
CITY Oak Vienna
B C D E
CITY Oak Stockholm
A B C D E
CITY Oak Koln
G
CITY Oak Malmoe'
H
CITY Oak Munchen
G
CITY Oak Salzburg
G
CITY Oak Copenhagen
H
CITY Oak Helsinki
H
CITY Oak Nice
H
PALACE Oak Earth
A B C D E EA B C D
PALACE Oak Noir
A B C D E
PALACE Oak Radiant
MANOR Oak Topaz
H
MANOR Oak Amber
H H
MANOR Oak Garnet
H
MANOR Oak Opal
G
ESTATE Oak Sea Shell
ESTATE Oak Fog
G
PALACE Oak Sea Mist
A B C D E G
ESTATE Oak Granit
G
ESTATE Oak Sand ESTATE Oak Steine
G
C E
VERMONT Noce Imperial
G
VERMONT Noce Medio VERMONT Noce Claret
C E
VERMONT Noce Piccolo
H C E
VERMONT Noce Rosso
H
VERMONT Noce Lila VERMONTCanadian Hard Maple
HG
VERMONT Noce Rose
G
SKÅNE Ash Ivory
G
SKÅNE Ash Stardust
A B C D E F G H2400 x 210 (mm)1 Strip
2100 x 185 (mm)1 Strip
2100 x 135 (mm)1 Strip
1800 x 185 (mm)1 Strip
1800 x 135 (mm)1 Strip
1200 x 120 (mm)1 Strip
2400 x 185 (mm)2 Strips
2400 x 195 (mm)3 Strips
Stained Brushed Matt Lacquer Satin Lacquer Smoked Bevelled Edge Micro-Bevelled Edge Square Edge
QUICK REFERENCE GUIDE
C E
VERMONT Noce GrandeFUMOIR Oak Fume
A B C D E
FUMOIR Oak Smokehouse
A B C D EH
MANOR Oak Pearl FUMOIR Oak Moss
H
ROVERE Oak Bronze
FF
ROVERE Oak Choco
F
ROVERE Oak CopperROVERE Oak Glace
F
ROVERE Oak Silver
F
ECLECTIC Ash Fressno
F
ECLECTIC Nussbaum
F
ECLECTIC Nussbaum Roja
F
ECLECTIC Wenge
F
ECLECTIC Wenge Rustico
F
ROVERE Oak Prime
F
ROVERE Oak Native
F
ROVERE Smoked Oak
F
F
EICHE Oak Cigar
F
EICHE Oak Espresso EICHE Oak Tobacco
F
EXOTICSAmerican Walnut Naturale
F
EXOTICSSucupira Naturale
F
EICHE Oak Cappuccino
FF
EICHE Oak CrèmeEICHE Oak Nature
F
EICHE Oak Naturale
F
EXOTICS Smoked Sapele
F
EXOTICS Sapele Naturale
F
EXOTICSMyrtle Naturale
F
EXOTICS Smoked Ash
F
EXOTICSPanga Panga Naturale
F
WAR
RANTYYEARS30
Thickness: Top Layer (Veneer) - 3mm Middle Layer (Pine) - 10mm Balancing Veneer - 2mm
WAR
RANTY
YEARS20
Thickness: Top Layer (Veneer) - 2mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 2mm
WAR
RANTY
YEARS10
Thickness: Top Layer (Veneer) - 0.6mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 0.6mm
CITY Oak Berlin
A B C D E
CITY Oak Frankfurt
G
CITY Oak London
B C D E
CITY Oak Vienna
B C D E
CITY Oak Stockholm
A B C D E
CITY Oak Koln
G
CITY Oak Malmoe'
H
CITY Oak Munchen
G
CITY Oak Salzburg
G
CITY Oak Copenhagen
H
CITY Oak Helsinki
H
CITY Oak Nice
H
PALACE Oak Earth
A B C D E EA B C D
PALACE Oak Noir
A B C D E
PALACE Oak Radiant
MANOR Oak Topaz
H
MANOR Oak Amber
H H
MANOR Oak Garnet
H
MANOR Oak Opal
G
ESTATE Oak Sea Shell
ESTATE Oak Fog
G
PALACE Oak Sea Mist
A B C D E G
ESTATE Oak Granit
G
ESTATE Oak Sand ESTATE Oak Steine
G
C E
VERMONT Noce Imperial
G
VERMONT Noce Medio VERMONT Noce Claret
C E
VERMONT Noce Piccolo
H C E
VERMONT Noce Rosso
H
VERMONT Noce Lila VERMONTCanadian Hard Maple
HG
VERMONT Noce Rose
G
SKÅNE Ash Ivory
G
SKÅNE Ash Stardust
A B C D E F G H2400 x 210 (mm)1 Strip
2100 x 185 (mm)1 Strip
2100 x 135 (mm)1 Strip
1800 x 185 (mm)1 Strip
1800 x 135 (mm)1 Strip
1200 x 120 (mm)1 Strip
2400 x 185 (mm)2 Strips
2400 x 195 (mm)3 Strips
Stained Brushed Matt Lacquer Satin Lacquer Smoked Bevelled Edge Micro-Bevelled Edge Square Edge
QUICK REFERENCE GUIDE
C E
VERMONT Noce GrandeFUMOIR Oak Fume
A B C D E
FUMOIR Oak Smokehouse
A B C D EH
MANOR Oak Pearl FUMOIR Oak Moss
H
ROVERE Oak Bronze
FF
ROVERE Oak Choco
F
ROVERE Oak CopperROVERE Oak Glace
F
ROVERE Oak Silver
F
ECLECTIC Ash Fressno
F
ECLECTIC Nussbaum
F
ECLECTIC Nussbaum Roja
F
ECLECTIC Wenge
F
ECLECTIC Wenge Rustico
F
ROVERE Oak Prime
F
ROVERE Oak Native
F
ROVERE Smoked Oak
F
F
EICHE Oak Cigar
F
EICHE Oak Espresso EICHE Oak Tobacco
F
EXOTICSAmerican Walnut Naturale
F
EXOTICSSucupira Naturale
F
EICHE Oak Cappuccino
FF
EICHE Oak CrèmeEICHE Oak Nature
F
EICHE Oak Naturale
F
EXOTICS Smoked Sapele
F
EXOTICS Sapele Naturale
F
EXOTICSMyrtle Naturale
F
EXOTICS Smoked Ash
F
EXOTICSPanga Panga Naturale
F
THE FINE ART OF FLOORING
Excellence In Every LayerMikasa floors consist of three layers composed of Real Hard Wood, Stabilizing Core and
Balancing Layer. Put together using the most modern technology, this construction provides
solidity and stability to every plank while restricting the expansion and contraction of wood
and giving your floor the resilience to stand the test of time and climate.
A revolutionary technology that locks two planks together without using glue, ensuring that the
joints that bind the two planks never open up. allows for ease of installation, giving a
seamless look to your floor that withstands the effects of seasonal change and foot traffic.
The Bond That Lasts Forever
youtube.com/mikasafl oorstwitter.com/mikasafl oorsfacebook.com/mikasafl oors
Greenlam Industries Limited,1501-05, Narain Manzil, 23, Barakhamba Road, New Delhi 110001, IndiaT: +91-11-42791399 E: [email protected]
Due to printing limitations product colour and texture reproduced in this brochure may vary from actual product. We, recommend you to please refer actual product for exact grain patterns and shades.
www.mikasafl oors.com
Volume1
The Magic Of Real Wood. The Reassurance Of Technology.Greenlam Industries Limited. It has been beautifying spaces for years by infusing creativity into every piece of work and turning it into sheer pieces of beauty and brilliance. A name to be reckoned with in surfacing products in more than 100 countries, Greenlam Industries Limited is standing tall with its guiding philosophies of Innovative technologies and Creative solutions.
Carrying the legacy forward, Greenlam takes pleasure in presenting Mikasa, real wood floors, produced in India for the first time at its fully-integrated plant at Behror, Rajasthan.
Mikasa is inspired by wood. Each piece of wood, naturally beautiful, is further enhanced using the latest technology, thus bringing out the true character of the wood and presenting it to you in its full glory.
We create the finest floors. For those who have the finest taste.
Stabilising Core
Balancing Layer
Real Hard Wood
MikasaADDOur principles forsourcing wood fromacross the globe.
AVAILABILITY
To ensure you have access to most popular wood species from across the globe.
DESIGN
So that your floor becomes on integral
part of your total décor.
DURABILITY
To enhance the nature of wood by using
the latest technology.
Thickness (mm)
Veneer Thickness (mm)
Plank Dimensions (mm)
Configuration
Wood Species
No. of Planks / Pack
Sq.Mtrs / Pack
Weight / Pack (Kg)
Joint
Core Material
Finish
Warranty*
15
Up to 3.0
Width: 135-210 Length: 1800-2400
1, 2 & 3 Strips
Oak, Walnut, Maple Ash and other exotic species
06 Planks
1.46 m2 - 3.02 m2
12.80 -23.40
PlankLocTM, Glueless
Pine
Brushed, Matt and Satin
30 Years in a residential environment. Check for Warranty in commercial applications.
13
Up to 2.0
Width: 120 Length: 200
1 Strip
06 Planks
0.86 m2
10.80
High Density Fiber Board
20 Years in a residential environment. Check for Warranty in commercial applications.
10
Up to 0.6
Width: 120 Length: 1200
1 Strip
08 Planks
1.15 m2
9.85
High Density Fiber Board
10 Years in a residential environment. Check for Warranty in commercial applications.
TECHNICAL INFORMATION
PRODUCT CHARACTERISTICS
Boards are constructed in 3 layers in order to minimize expansion and contraction within the floorboard. The direction of the fibers within each layer is oriented at right angles to the adjacent layer.
The surface is pre-finished with several layers of UV hardened acrylic lacquer free from formaldehyde and solvents.
1-strip plank, with / without bevelled edge, MIKASA PlankLocTM glue free joint on all edges. Surface layer consists of sliced or rotary cut strips of hardwood and a backing of pine / spruce veneer.
1, 2 & 3-strip plank with / without bevelled edges. MIKASA PlankLocTM glue free joint on all edges. Surface layer consists of sliced strips of hardwood and a backing of pine / spruce veneer.
The top layer is made of select hardwood and is up to 3.0 mm in thickness. This allows resanding and refinishing atleast twice. Detailed information about maintenance is included in our Maintenance & Repair Guide. Download it from our website www.mikasafloors.com.
The top layer is made of hardwood and is up to 2.0 mm in thickness. This allows resanding and refinishing atleast once. Detailed information about maintenance is included in our Maintenance & Repair Guide. Download it from our website www.mikasafloors.com.
The top layer is made of hardwood and is up to 0.6 mm in thickness. This does not allow any resanding and refinishing The surface is pre-finished with several layers of UV hardened acrylic lacquer free from formaldehyde and solvents.
Average moisture content at delivery is approximately 7-9%.The boards are delivered free of insects, woodworms etc. This is secured by the process temperatures.
The boards comply more than adequately with the stringent EU E1 norms for formaldehyde emissions.
Wooden floors fulfill the requirements for class G, the highest fire classification for floors as per Swedish Building Code, BBR 94.
Resists most household stains up to 24 hours
Wood is a natural product and changes color with time when exposed to light
Floating / Glue down
Suitable for room temperature (max temperature 27°C), waterborne system or self-regulating electrical system.
The subfloor must be dry, clean, level and solid. The requirements in HusAMA98, Table 43.DC/-1 and MDB.3 apply. Also note our Subfloor Requirements. You can download more details on Subfloor Requirements and Underfloor Heating from our website www.mikasafloors.com.
FinishContent
Classifications
Heating Compatibility
WAR
RANTY
YEARS30
Thickness: Top Layer (Veneer) - 3mm Middle Layer (Pine) - 10mm Balancing Veneer - 2mm
WAR
RANTY
YEARS20
Thickness: Top Layer (Veneer) - 2mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 2mm
WAR
RANTY
YEARS10
Thickness: Top Layer (Veneer) - 0.6mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 0.6mm
CITY Oak Berlin
A B C D E
CITY Oak Frankfurt
G
CITY Oak London
B C D E
CITY Oak Vienna
B C D E
CITY Oak Stockholm
A B C D E
CITY Oak Koln
G
CITY Oak Malmoe'
H
CITY Oak Munchen
G
CITY Oak Salzburg
G
CITY Oak Copenhagen
H
CITY Oak Helsinki
H
CITY Oak Nice
H
PALACE Oak Earth
A B C D E EA B C D
PALACE Oak Noir
A B C D E
PALACE Oak Radiant
MANOR Oak Topaz
H
MANOR Oak Amber
H H
MANOR Oak Garnet
H
MANOR Oak Opal
G
ESTATE Oak Sea Shell
ESTATE Oak Fog
G
PALACE Oak Sea Mist
A B C D E G
ESTATE Oak Granit
G
ESTATE Oak Sand ESTATE Oak Steine
G
C E
VERMONT Noce Imperial
G
VERMONT Noce Medio VERMONT Noce Claret
C E
VERMONT Noce Piccolo
H C E
VERMONT Noce Rosso
H
VERMONT Noce Lila VERMONTCanadian Hard Maple
HG
VERMONT Noce Rose
G
SKÅNE Ash Ivory
G
SKÅNE Ash Stardust
A B C D E F G H2400 x 210 (mm)1 Strip
2100 x 185 (mm)1 Strip
2100 x 135 (mm)1 Strip
1800 x 185 (mm)1 Strip
1800 x 135 (mm)1 Strip
1200 x 120 (mm)1 Strip
2400 x 185 (mm)2 Strips
2400 x 195 (mm)3 Strips
Stained Brushed Matt Lacquer Satin Lacquer Smoked Bevelled Edge Micro-Bevelled Edge Square Edge
QUICK REFERENCE GUIDE
C E
VERMONT Noce GrandeFUMOIR Oak Fume
A B C D E
FUMOIR Oak Smokehouse
A B C D EH
MANOR Oak Pearl FUMOIR Oak Moss
H
ROVERE Oak Bronze
FF
ROVERE Oak Choco
F
ROVERE Oak CopperROVERE Oak Glace
F
ROVERE Oak Silver
F
ECLECTIC Ash Fressno
F
ECLECTIC Nussbaum
F
ECLECTIC Nussbaum Roja
F
ECLECTIC Wenge
F
ECLECTIC Wenge Rustico
F
ROVERE Oak Prime
F
ROVERE Oak Native
F
ROVERE Smoked Oak
F
F
EICHE Oak Cigar
F
EICHE Oak Espresso EICHE Oak Tobacco
F
EXOTICSAmerican Walnut Naturale
F
EXOTICSSucupira Naturale
F
EICHE Oak Cappuccino
FF
EICHE Oak CrèmeEICHE Oak Nature
F
EICHE Oak Naturale
F
EXOTICS Smoked Sapele
F
EXOTICS Sapele Naturale
F
EXOTICSMyrtle Naturale
F
EXOTICS Smoked Ash
F
EXOTICSPanga Panga Naturale
F
WAR
RANTY
YEARS30
Thickness: Top Layer (Veneer) - 3mm Middle Layer (Pine) - 10mm Balancing Veneer - 2mm
WAR
RANTY
YEARS20
Thickness: Top Layer (Veneer) - 2mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 2mm
WAR
RANTY
YEARS10
Thickness: Top Layer (Veneer) - 0.6mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 0.6mm
CITY Oak Berlin
A B C D E
CITY Oak Frankfurt
G
CITY Oak London
B C D E
CITY Oak Vienna
B C D E
CITY Oak Stockholm
A B C D E
CITY Oak Koln
G
CITY Oak Malmoe'
H
CITY Oak Munchen
G
CITY Oak Salzburg
G
CITY Oak Copenhagen
H
CITY Oak Helsinki
H
CITY Oak Nice
H
PALACE Oak Earth
A B C D E EA B C D
PALACE Oak Noir
A B C D E
PALACE Oak Radiant
MANOR Oak Topaz
H
MANOR Oak Amber
H H
MANOR Oak Garnet
H
MANOR Oak Opal
G
ESTATE Oak Sea Shell
ESTATE Oak Fog
G
PALACE Oak Sea Mist
A B C D E G
ESTATE Oak Granit
G
ESTATE Oak Sand ESTATE Oak Steine
G
C E
VERMONT Noce Imperial
G
VERMONT Noce Medio VERMONT Noce Claret
C E
VERMONT Noce Piccolo
H C E
VERMONT Noce Rosso
H
VERMONT Noce Lila VERMONTCanadian Hard Maple
HG
VERMONT Noce Rose
G
SKÅNE Ash Ivory
G
SKÅNE Ash Stardust
A B C D E F G H2400 x 210 (mm)1 Strip
2100 x 185 (mm)1 Strip
2100 x 135 (mm)1 Strip
1800 x 185 (mm)1 Strip
1800 x 135 (mm)1 Strip
1200 x 120 (mm)1 Strip
2400 x 185 (mm)2 Strips
2400 x 195 (mm)3 Strips
Stained Brushed Matt Lacquer Satin Lacquer Smoked Bevelled Edge Micro-Bevelled Edge Square Edge
QUICK REFERENCE GUIDE
C E
VERMONT Noce GrandeFUMOIR Oak Fume
A B C D E
FUMOIR Oak Smokehouse
A B C D EH
MANOR Oak Pearl FUMOIR Oak Moss
H
ROVERE Oak Bronze
FF
ROVERE Oak Choco
F
ROVERE Oak CopperROVERE Oak Glace
F
ROVERE Oak Silver
F
ECLECTIC Ash Fressno
F
ECLECTIC Nussbaum
F
ECLECTIC Nussbaum Roja
F
ECLECTIC Wenge
F
ECLECTIC Wenge Rustico
F
ROVERE Oak Prime
F
ROVERE Oak Native
F
ROVERE Smoked Oak
F
F
EICHE Oak Cigar
F
EICHE Oak Espresso EICHE Oak Tobacco
F
EXOTICSAmerican Walnut Naturale
F
EXOTICSSucupira Naturale
F
EICHE Oak Cappuccino
FF
EICHE Oak CrèmeEICHE Oak Nature
F
EICHE Oak Naturale
F
EXOTICS Smoked Sapele
F
EXOTICS Sapele Naturale
F
EXOTICSMyrtle Naturale
F
EXOTICS Smoked Ash
F
EXOTICSPanga Panga Naturale
F
WAR
RANTY
YEARS30
Thickness: Top Layer (Veneer) - 3mm Middle Layer (Pine) - 10mm Balancing Veneer - 2mm
WAR
RANTY
YEARS20
Thickness: Top Layer (Veneer) - 2mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 2mm
WAR
RANTY
YEARS10
Thickness: Top Layer (Veneer) - 0.6mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 0.6mm
CITY Oak Berlin
A B C D E
CITY Oak Frankfurt
G
CITY Oak London
B C D E
CITY Oak Vienna
B C D E
CITY Oak Stockholm
A B C D E
CITY Oak Koln
G
CITY Oak Malmoe'
H
CITY Oak Munchen
G
CITY Oak Salzburg
G
CITY Oak Copenhagen
H
CITY Oak Helsinki
H
CITY Oak Nice
H
PALACE Oak Earth
A B C D E EA B C D
PALACE Oak Noir
A B C D E
PALACE Oak Radiant
MANOR Oak Topaz
H
MANOR Oak Amber
H H
MANOR Oak Garnet
H
MANOR Oak Opal
G
ESTATE Oak Sea Shell
ESTATE Oak Fog
G
PALACE Oak Sea Mist
A B C D E G
ESTATE Oak Granit
G
ESTATE Oak Sand ESTATE Oak Steine
G
C E
VERMONT Noce Imperial
G
VERMONT Noce Medio VERMONT Noce Claret
C E
VERMONT Noce Piccolo
H C E
VERMONT Noce Rosso
H
VERMONT Noce Lila VERMONTCanadian Hard Maple
HG
VERMONT Noce Rose
G
SKÅNE Ash Ivory
G
SKÅNE Ash Stardust
A B C D E F G H2400 x 210 (mm)1 Strip
2100 x 185 (mm)1 Strip
2100 x 135 (mm)1 Strip
1800 x 185 (mm)1 Strip
1800 x 135 (mm)1 Strip
1200 x 120 (mm)1 Strip
2400 x 185 (mm)2 Strips
2400 x 195 (mm)3 Strips
Stained Brushed Matt Lacquer Satin Lacquer Smoked Bevelled Edge Micro-Bevelled Edge Square Edge
QUICK REFERENCE GUIDE
C E
VERMONT Noce GrandeFUMOIR Oak Fume
A B C D E
FUMOIR Oak Smokehouse
A B C D EH
MANOR Oak Pearl FUMOIR Oak Moss
H
ROVERE Oak Bronze
FF
ROVERE Oak Choco
F
ROVERE Oak CopperROVERE Oak Glace
F
ROVERE Oak Silver
F
ECLECTIC Ash Fressno
F
ECLECTIC Nussbaum
F
ECLECTIC Nussbaum Roja
F
ECLECTIC Wenge
F
ECLECTIC Wenge Rustico
F
ROVERE Oak Prime
F
ROVERE Oak Native
F
ROVERE Smoked Oak
F
F
EICHE Oak Cigar
F
EICHE Oak Espresso EICHE Oak Tobacco
F
EXOTICSAmerican Walnut Naturale
F
EXOTICSSucupira Naturale
F
EICHE Oak Cappuccino
FF
EICHE Oak CrèmeEICHE Oak Nature
F
EICHE Oak Naturale
F
EXOTICS Smoked Sapele
F
EXOTICS Sapele Naturale
F
EXOTICSMyrtle Naturale
F
EXOTICS Smoked Ash
F
EXOTICSPanga Panga Naturale
F
WAR
RANTY
YEARS30
Thickness: Top Layer (Veneer) - 3mm Middle Layer (Pine) - 10mm Balancing Veneer - 2mm
WAR
RANTY
YEARS20
Thickness: Top Layer (Veneer) - 2mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 2mm
WAR
RANTY
YEARS10
Thickness: Top Layer (Veneer) - 0.6mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 0.6mm
CITY Oak Berlin
A B C D E
CITY Oak Frankfurt
G
CITY Oak London
B C D E
CITY Oak Vienna
B C D E
CITY Oak Stockholm
A B C D E
CITY Oak Koln
G
CITY Oak Malmoe'
H
CITY Oak Munchen
G
CITY Oak Salzburg
G
CITY Oak Copenhagen
H
CITY Oak Helsinki
H
CITY Oak Nice
H
PALACE Oak Earth
A B C D E EA B C D
PALACE Oak Noir
A B C D E
PALACE Oak Radiant
MANOR Oak Topaz
H
MANOR Oak Amber
H H
MANOR Oak Garnet
H
MANOR Oak Opal
G
ESTATE Oak Sea Shell
ESTATE Oak Fog
G
PALACE Oak Sea Mist
A B C D E G
ESTATE Oak Granit
G
ESTATE Oak Sand ESTATE Oak Steine
G
C E
VERMONT Noce Imperial
G
VERMONT Noce Medio VERMONT Noce Claret
C E
VERMONT Noce Piccolo
H C E
VERMONT Noce Rosso
H
VERMONT Noce Lila VERMONTCanadian Hard Maple
HG
VERMONT Noce Rose
G
SKÅNE Ash Ivory
G
SKÅNE Ash Stardust
A B C D E F G H2400 x 210 (mm)1 Strip
2100 x 185 (mm)1 Strip
2100 x 135 (mm)1 Strip
1800 x 185 (mm)1 Strip
1800 x 135 (mm)1 Strip
1200 x 120 (mm)1 Strip
2400 x 185 (mm)2 Strips
2400 x 195 (mm)3 Strips
Stained Brushed Matt Lacquer Satin Lacquer Smoked Bevelled Edge Micro-Bevelled Edge Square Edge
QUICK REFERENCE GUIDE
C E
VERMONT Noce GrandeFUMOIR Oak Fume
A B C D E
FUMOIR Oak Smokehouse
A B C D EH
MANOR Oak Pearl FUMOIR Oak Moss
H
ROVERE Oak Bronze
FF
ROVERE Oak Choco
F
ROVERE Oak CopperROVERE Oak Glace
F
ROVERE Oak Silver
F
ECLECTIC Ash Fressno
F
ECLECTIC Nussbaum
F
ECLECTIC Nussbaum Roja
F
ECLECTIC Wenge
F
ECLECTIC Wenge Rustico
F
ROVERE Oak Prime
F
ROVERE Oak Native
F
ROVERE Smoked Oak
F
F
EICHE Oak Cigar
F
EICHE Oak Espresso EICHE Oak Tobacco
F
EXOTICSAmerican Walnut Naturale
F
EXOTICSSucupira Naturale
F
EICHE Oak Cappuccino
FF
EICHE Oak CrèmeEICHE Oak Nature
F
EICHE Oak Naturale
F
EXOTICS Smoked Sapele
F
EXOTICS Sapele Naturale
F
EXOTICSMyrtle Naturale
F
EXOTICS Smoked Ash
F
EXOTICSPanga Panga Naturale
F
THE FINE ART OF FLOORING
Excellence In Every LayerMikasa floors consist of three layers composed of Real Hard Wood, Stabilizing Core and
Balancing Layer. Put together using the most modern technology, this construction provides
solidity and stability to every plank while restricting the expansion and contraction of wood
and giving your floor the resilience to stand the test of time and climate.
A revolutionary technology that locks two planks together without using glue, ensuring that the
joints that bind the two planks never open up. allows for ease of installation, giving a
seamless look to your floor that withstands the effects of seasonal change and foot traffic.
The Bond That Lasts Forever
youtube.com/mikasafl oorstwitter.com/mikasafl oorsfacebook.com/mikasafl oors
Greenlam Industries Limited,1501-05, Narain Manzil, 23, Barakhamba Road, New Delhi 110001, IndiaT: +91-11-42791399 E: [email protected]
Due to printing limitations product colour and texture reproduced in this brochure may vary from actual product. We, recommend you to please refer actual product for exact grain patterns and shades.
www.mikasafl oors.com
Volume1
The Magic Of Real Wood. The Reassurance Of Technology.Greenlam Industries Limited. It has been beautifying spaces for years by infusing creativity into every piece of work and turning it into sheer pieces of beauty and brilliance. A name to be reckoned with in surfacing products in more than 100 countries, Greenlam Industries Limited is standing tall with its guiding philosophies of Innovative technologies and Creative solutions.
Carrying the legacy forward, Greenlam takes pleasure in presenting Mikasa, real wood floors, produced in India for the first time at its fully-integrated plant at Behror, Rajasthan.
Mikasa is inspired by wood. Each piece of wood, naturally beautiful, is further enhanced using the latest technology, thus bringing out the true character of the wood and presenting it to you in its full glory.
We create the finest floors. For those who have the finest taste.
Stabilising Core
Balancing Layer
Real Hard Wood
MikasaADDOur principles forsourcing wood fromacross the globe.
AVAILABILITY
To ensure you have access to most popular wood species from across the globe.
DESIGN
So that your floor becomes on integral
part of your total décor.
DURABILITY
To enhance the nature of wood by using
the latest technology.
Thickness (mm)
Veneer Thickness (mm)
Plank Dimensions (mm)
Configuration
Wood Species
No. of Planks / Pack
Sq.Mtrs / Pack
Weight / Pack (Kg)
Joint
Core Material
Finish
Warranty*
15
Up to 3.0
Width: 135-210 Length: 1800-2400
1, 2 & 3 Strips
Oak, Walnut, Maple Ash and other exotic species
06 Planks
1.46 m2 - 3.02 m2
12.80 -23.40
PlankLocTM, Glueless
Pine
Brushed, Matt and Satin
30 Years in a residential environment. Check for Warranty in commercial applications.
13
Up to 2.0
Width: 120 Length: 200
1 Strip
06 Planks
0.86 m2
10.80
High Density Fiber Board
20 Years in a residential environment. Check for Warranty in commercial applications.
10
Up to 0.6
Width: 120 Length: 1200
1 Strip
08 Planks
1.15 m2
9.85
High Density Fiber Board
10 Years in a residential environment. Check for Warranty in commercial applications.
TECHNICAL INFORMATION
PRODUCT CHARACTERISTICS
Boards are constructed in 3 layers in order to minimize expansion and contraction within the floorboard. The direction of the fibers within each layer is oriented at right angles to the adjacent layer.
The surface is pre-finished with several layers of UV hardened acrylic lacquer free from formaldehyde and solvents.
1-strip plank, with / without bevelled edge, MIKASA PlankLocTM glue free joint on all edges. Surface layer consists of sliced or rotary cut strips of hardwood and a backing of pine / spruce veneer.
1, 2 & 3-strip plank with / without bevelled edges. MIKASA PlankLocTM glue free joint on all edges. Surface layer consists of sliced strips of hardwood and a backing of pine / spruce veneer.
The top layer is made of select hardwood and is up to 3.0 mm in thickness. This allows resanding and refinishing atleast twice. Detailed information about maintenance is included in our Maintenance & Repair Guide. Download it from our website www.mikasafloors.com.
The top layer is made of hardwood and is up to 2.0 mm in thickness. This allows resanding and refinishing atleast once. Detailed information about maintenance is included in our Maintenance & Repair Guide. Download it from our website www.mikasafloors.com.
The top layer is made of hardwood and is up to 0.6 mm in thickness. This does not allow any resanding and refinishing The surface is pre-finished with several layers of UV hardened acrylic lacquer free from formaldehyde and solvents.
Average moisture content at delivery is approximately 7-9%.The boards are delivered free of insects, woodworms etc. This is secured by the process temperatures.
The boards comply more than adequately with the stringent EU E1 norms for formaldehyde emissions.
Wooden floors fulfill the requirements for class G, the highest fire classification for floors as per Swedish Building Code, BBR 94.
Resists most household stains up to 24 hours
Wood is a natural product and changes color with time when exposed to light
Floating / Glue down
Suitable for room temperature (max temperature 27°C), waterborne system or self-regulating electrical system.
The subfloor must be dry, clean, level and solid. The requirements in HusAMA98, Table 43.DC/-1 and MDB.3 apply. Also note our Subfloor Requirements. You can download more details on Subfloor Requirements and Underfloor Heating from our website www.mikasafloors.com.
FinishContent
Classifications
Heating Compatibility
WAR
RANTY
YEARS30
Thickness: Top Layer (Veneer) - 3mm Middle Layer (Pine) - 10mm Balancing Veneer - 2mmWAR
RANTY
YEARS20
Thickness: Top Layer (Veneer) - 2mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 2mm
WAR
RANTY
YEARS10
Thickness: Top Layer (Veneer) - 0.6mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 0.6mm
CITY Oak Berlin
A B C D E
CITY Oak Frankfurt
G
CITY Oak London
B C D E
CITY Oak Vienna
B C D E
CITY Oak Stockholm
A B C D E
CITY Oak Koln
G
CITY Oak Malmoe'
H
CITY Oak Munchen
G
CITY Oak Salzburg
G
CITY Oak Copenhagen
H
CITY Oak Helsinki
H
CITY Oak Nice
H
PALACE Oak Earth
A B C D E EA B C D
PALACE Oak Noir
A B C D E
PALACE Oak Radiant
MANOR Oak Topaz
H
MANOR Oak Amber
H H
MANOR Oak Garnet
H
MANOR Oak Opal
G
ESTATE Oak Sea Shell
ESTATE Oak Fog
G
PALACE Oak Sea Mist
A B C D E G
ESTATE Oak Granit
G
ESTATE Oak Sand ESTATE Oak Steine
G
C E
VERMONT Noce Imperial
G
VERMONT Noce Medio VERMONT Noce Claret
C E
VERMONT Noce Piccolo
H C E
VERMONT Noce Rosso
H
VERMONT Noce Lila VERMONTCanadian Hard Maple
HG
VERMONT Noce Rose
G
SKÅNE Ash Ivory
G
SKÅNE Ash Stardust
A B C D E F G H2400 x 210 (mm)1 Strip
2100 x 185 (mm)1 Strip
2100 x 135 (mm)1 Strip
1800 x 185 (mm)1 Strip
1800 x 135 (mm)1 Strip
1200 x 120 (mm)1 Strip
2400 x 185 (mm)2 Strips
2400 x 195 (mm)3 Strips
Stained Brushed Matt Lacquer Satin Lacquer Smoked Bevelled Edge Micro-Bevelled Edge Square Edge
QUICK REFERENCE GUIDE
C E
VERMONT Noce GrandeFUMOIR Oak Fume
A B C D E
FUMOIR Oak Smokehouse
A B C D EH
MANOR Oak Pearl FUMOIR Oak Moss
H
ROVERE Oak Bronze
FF
ROVERE Oak Choco
F
ROVERE Oak CopperROVERE Oak Glace
F
ROVERE Oak Silver
F
ECLECTIC Ash Fressno
F
ECLECTIC Nussbaum
F
ECLECTIC Nussbaum Roja
F
ECLECTIC Wenge
F
ECLECTIC Wenge Rustico
F
ROVERE Oak Prime
F
ROVERE Oak Native
F
ROVERE Smoked Oak
F
F
EICHE Oak Cigar
F
EICHE Oak Espresso EICHE Oak Tobacco
F
EXOTICSAmerican Walnut Naturale
F
EXOTICSSucupira Naturale
F
EICHE Oak Cappuccino
FF
EICHE Oak CrèmeEICHE Oak Nature
F
EICHE Oak Naturale
F
EXOTICS Smoked Sapele
F
EXOTICS Sapele Naturale
F
EXOTICSMyrtle Naturale
F
EXOTICS Smoked Ash
F
EXOTICSPanga Panga Naturale
F
WAR
RANTY
YEARS30
Thickness: Top Layer (Veneer) - 3mm Middle Layer (Pine) - 10mm Balancing Veneer - 2mm
WAR
RANTYYEARS20
Thickness: Top Layer (Veneer) - 2mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 2mm
WAR
RANTY
YEARS10
Thickness: Top Layer (Veneer) - 0.6mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 0.6mm
CITY Oak Berlin
A B C D E
CITY Oak Frankfurt
G
CITY Oak London
B C D E
CITY Oak Vienna
B C D E
CITY Oak Stockholm
A B C D E
CITY Oak Koln
G
CITY Oak Malmoe'
H
CITY Oak Munchen
G
CITY Oak Salzburg
G
CITY Oak Copenhagen
H
CITY Oak Helsinki
H
CITY Oak Nice
H
PALACE Oak Earth
A B C D E EA B C D
PALACE Oak Noir
A B C D E
PALACE Oak Radiant
MANOR Oak Topaz
H
MANOR Oak Amber
H H
MANOR Oak Garnet
H
MANOR Oak Opal
G
ESTATE Oak Sea Shell
ESTATE Oak Fog
G
PALACE Oak Sea Mist
A B C D E G
ESTATE Oak Granit
G
ESTATE Oak Sand ESTATE Oak Steine
G
C E
VERMONT Noce Imperial
G
VERMONT Noce Medio VERMONT Noce Claret
C E
VERMONT Noce Piccolo
H C E
VERMONT Noce Rosso
H
VERMONT Noce Lila VERMONTCanadian Hard Maple
HG
VERMONT Noce Rose
G
SKÅNE Ash Ivory
G
SKÅNE Ash Stardust
A B C D E F G H2400 x 210 (mm)1 Strip
2100 x 185 (mm)1 Strip
2100 x 135 (mm)1 Strip
1800 x 185 (mm)1 Strip
1800 x 135 (mm)1 Strip
1200 x 120 (mm)1 Strip
2400 x 185 (mm)2 Strips
2400 x 195 (mm)3 Strips
Stained Brushed Matt Lacquer Satin Lacquer Smoked Bevelled Edge Micro-Bevelled Edge Square Edge
QUICK REFERENCE GUIDE
C E
VERMONT Noce GrandeFUMOIR Oak Fume
A B C D E
FUMOIR Oak Smokehouse
A B C D EH
MANOR Oak Pearl FUMOIR Oak Moss
H
ROVERE Oak Bronze
FF
ROVERE Oak Choco
F
ROVERE Oak CopperROVERE Oak Glace
F
ROVERE Oak Silver
F
ECLECTIC Ash Fressno
F
ECLECTIC Nussbaum
F
ECLECTIC Nussbaum Roja
F
ECLECTIC Wenge
F
ECLECTIC Wenge Rustico
F
ROVERE Oak Prime
F
ROVERE Oak Native
F
ROVERE Smoked Oak
F
F
EICHE Oak Cigar
F
EICHE Oak Espresso EICHE Oak Tobacco
F
EXOTICSAmerican Walnut Naturale
F
EXOTICSSucupira Naturale
F
EICHE Oak Cappuccino
FF
EICHE Oak CrèmeEICHE Oak Nature
F
EICHE Oak Naturale
F
EXOTICS Smoked Sapele
F
EXOTICS Sapele Naturale
F
EXOTICSMyrtle Naturale
F
EXOTICS Smoked Ash
F
EXOTICSPanga Panga Naturale
F
WAR
RANTY
YEARS30
Thickness: Top Layer (Veneer) - 3mm Middle Layer (Pine) - 10mm Balancing Veneer - 2mm
WAR
RANTY
YEARS20
Thickness: Top Layer (Veneer) - 2mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 2mm
WAR
RANTY
YEARS10
Thickness: Top Layer (Veneer) - 0.6mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 0.6mm
CITY Oak Berlin
A B C D E
CITY Oak Frankfurt
G
CITY Oak London
B C D E
CITY Oak Vienna
B C D E
CITY Oak Stockholm
A B C D E
CITY Oak Koln
G
CITY Oak Malmoe'
H
CITY Oak Munchen
G
CITY Oak Salzburg
G
CITY Oak Copenhagen
H
CITY Oak Helsinki
H
CITY Oak Nice
H
PALACE Oak Earth
A B C D E EA B C D
PALACE Oak Noir
A B C D E
PALACE Oak Radiant
MANOR Oak Topaz
H
MANOR Oak Amber
H H
MANOR Oak Garnet
H
MANOR Oak Opal
G
ESTATE Oak Sea Shell
ESTATE Oak Fog
G
PALACE Oak Sea Mist
A B C D E G
ESTATE Oak Granit
G
ESTATE Oak Sand ESTATE Oak Steine
G
C E
VERMONT Noce Imperial
G
VERMONT Noce Medio VERMONT Noce Claret
C E
VERMONT Noce Piccolo
H C E
VERMONT Noce Rosso
H
VERMONT Noce Lila VERMONTCanadian Hard Maple
HG
VERMONT Noce Rose
G
SKÅNE Ash Ivory
G
SKÅNE Ash Stardust
A B C D E F G H2400 x 210 (mm)1 Strip
2100 x 185 (mm)1 Strip
2100 x 135 (mm)1 Strip
1800 x 185 (mm)1 Strip
1800 x 135 (mm)1 Strip
1200 x 120 (mm)1 Strip
2400 x 185 (mm)2 Strips
2400 x 195 (mm)3 Strips
Stained Brushed Matt Lacquer Satin Lacquer Smoked Bevelled Edge Micro-Bevelled Edge Square Edge
QUICK REFERENCE GUIDE
C E
VERMONT Noce GrandeFUMOIR Oak Fume
A B C D E
FUMOIR Oak Smokehouse
A B C D EH
MANOR Oak Pearl FUMOIR Oak Moss
H
ROVERE Oak Bronze
FF
ROVERE Oak Choco
F
ROVERE Oak CopperROVERE Oak Glace
F
ROVERE Oak Silver
F
ECLECTIC Ash Fressno
F
ECLECTIC Nussbaum
F
ECLECTIC Nussbaum Roja
F
ECLECTIC Wenge
F
ECLECTIC Wenge Rustico
F
ROVERE Oak Prime
F
ROVERE Oak Native
F
ROVERE Smoked Oak
F
F
EICHE Oak Cigar
F
EICHE Oak Espresso EICHE Oak Tobacco
F
EXOTICSAmerican Walnut Naturale
F
EXOTICSSucupira Naturale
F
EICHE Oak Cappuccino
FF
EICHE Oak CrèmeEICHE Oak Nature
F
EICHE Oak Naturale
F
EXOTICS Smoked Sapele
F
EXOTICS Sapele Naturale
F
EXOTICSMyrtle Naturale
F
EXOTICS Smoked Ash
F
EXOTICSPanga Panga Naturale
F
WAR
RANTY
YEARS30
Thickness: Top Layer (Veneer) - 3mm Middle Layer (Pine) - 10mm Balancing Veneer - 2mm
WAR
RANTY
YEARS20
Thickness: Top Layer (Veneer) - 2mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 2mm
WAR
RANTY
YEARS10
Thickness: Top Layer (Veneer) - 0.6mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 0.6mm
CITY Oak Berlin
A B C D E
CITY Oak Frankfurt
G
CITY Oak London
B C D E
CITY Oak Vienna
B C D E
CITY Oak Stockholm
A B C D E
CITY Oak Koln
G
CITY Oak Malmoe'
H
CITY Oak Munchen
G
CITY Oak Salzburg
G
CITY Oak Copenhagen
H
CITY Oak Helsinki
H
CITY Oak Nice
H
PALACE Oak Earth
A B C D E EA B C D
PALACE Oak Noir
A B C D E
PALACE Oak Radiant
MANOR Oak Topaz
H
MANOR Oak Amber
H H
MANOR Oak Garnet
H
MANOR Oak Opal
G
ESTATE Oak Sea Shell
ESTATE Oak Fog
G
PALACE Oak Sea Mist
A B C D E G
ESTATE Oak Granit
G
ESTATE Oak Sand ESTATE Oak Steine
G
C E
VERMONT Noce Imperial
G
VERMONT Noce Medio VERMONT Noce Claret
C E
VERMONT Noce Piccolo
H C E
VERMONT Noce Rosso
H
VERMONT Noce Lila VERMONTCanadian Hard Maple
HG
VERMONT Noce Rose
G
SKÅNE Ash Ivory
G
SKÅNE Ash Stardust
A B C D E F G H2400 x 210 (mm)1 Strip
2100 x 185 (mm)1 Strip
2100 x 135 (mm)1 Strip
1800 x 185 (mm)1 Strip
1800 x 135 (mm)1 Strip
1200 x 120 (mm)1 Strip
2400 x 185 (mm)2 Strips
2400 x 195 (mm)3 Strips
Stained Brushed Matt Lacquer Satin Lacquer Smoked Bevelled Edge Micro-Bevelled Edge Square Edge
QUICK REFERENCE GUIDE
C E
VERMONT Noce GrandeFUMOIR Oak Fume
A B C D E
FUMOIR Oak Smokehouse
A B C D EH
MANOR Oak Pearl FUMOIR Oak Moss
H
ROVERE Oak Bronze
FF
ROVERE Oak Choco
F
ROVERE Oak CopperROVERE Oak Glace
F
ROVERE Oak Silver
F
ECLECTIC Ash Fressno
F
ECLECTIC Nussbaum
F
ECLECTIC Nussbaum Roja
F
ECLECTIC Wenge
F
ECLECTIC Wenge Rustico
F
ROVERE Oak Prime
F
ROVERE Oak Native
F
ROVERE Smoked Oak
F
F
EICHE Oak Cigar
F
EICHE Oak Espresso EICHE Oak Tobacco
F
EXOTICSAmerican Walnut Naturale
F
EXOTICSSucupira Naturale
F
EICHE Oak Cappuccino
FF
EICHE Oak CrèmeEICHE Oak Nature
F
EICHE Oak Naturale
F
EXOTICS Smoked Sapele
F
EXOTICS Sapele Naturale
F
EXOTICSMyrtle Naturale
F
EXOTICS Smoked Ash
F
EXOTICSPanga Panga Naturale
F
THE FINE ART OF FLOORING
Excellence In Every LayerMikasa floors consist of three layers composed of Real Hard Wood, Stabilizing Core and
Balancing Layer. Put together using the most modern technology, this construction provides
solidity and stability to every plank while restricting the expansion and contraction of wood
and giving your floor the resilience to stand the test of time and climate.
A revolutionary technology that locks two planks together without using glue, ensuring that the
joints that bind the two planks never open up. allows for ease of installation, giving a
seamless look to your floor that withstands the effects of seasonal change and foot traffic.
The Bond That Lasts Forever
youtube.com/mikasafl oorstwitter.com/mikasafl oorsfacebook.com/mikasafl oors
Greenlam Industries Limited,1501-05, Narain Manzil, 23, Barakhamba Road, New Delhi 110001, IndiaT: +91-11-42791399 E: [email protected]
Due to printing limitations product colour and texture reproduced in this brochure may vary from actual product. We, recommend you to please refer actual product for exact grain patterns and shades.
www.mikasafl oors.com
Volume1
The Magic Of Real Wood. The Reassurance Of Technology.Greenlam Industries Limited. It has been beautifying spaces for years by infusing creativity into every piece of work and turning it into sheer pieces of beauty and brilliance. A name to be reckoned with in surfacing products in more than 100 countries, Greenlam Industries Limited is standing tall with its guiding philosophies of Innovative technologies and Creative solutions.
Carrying the legacy forward, Greenlam takes pleasure in presenting Mikasa, real wood floors, produced in India for the first time at its fully-integrated plant at Behror, Rajasthan.
Mikasa is inspired by wood. Each piece of wood, naturally beautiful, is further enhanced using the latest technology, thus bringing out the true character of the wood and presenting it to you in its full glory.
We create the finest floors. For those who have the finest taste.
Stabilising Core
Balancing Layer
Real Hard Wood
MikasaADDOur principles forsourcing wood fromacross the globe.
AVAILABILITY
To ensure you have access to most popular wood species from across the globe.
DESIGN
So that your floor becomes on integral
part of your total décor.
DURABILITY
To enhance the nature of wood by using
the latest technology.
Thickness (mm)
Veneer Thickness (mm)
Plank Dimensions (mm)
Configuration
Wood Species
No. of Planks / Pack
Sq.Mtrs / Pack
Weight / Pack (Kg)
Joint
Core Material
Finish
Warranty*
15
Up to 3.0
Width: 135-210 Length: 1800-2400
1, 2 & 3 Strips
Oak, Walnut, Maple Ash and other exotic species
06 Planks
1.46 m2 - 3.02 m2
12.80 -23.40
PlankLocTM, Glueless
Pine
Brushed, Matt and Satin
30 Years in a residential environment. Check for Warranty in commercial applications.
13
Up to 2.0
Width: 120 Length: 200
1 Strip
06 Planks
0.86 m2
10.80
High Density Fiber Board
20 Years in a residential environment. Check for Warranty in commercial applications.
10
Up to 0.6
Width: 120 Length: 1200
1 Strip
08 Planks
1.15 m2
9.85
High Density Fiber Board
10 Years in a residential environment. Check for Warranty in commercial applications.
TECHNICAL INFORMATION
PRODUCT CHARACTERISTICS
Boards are constructed in 3 layers in order to minimize expansion and contraction within the floorboard. The direction of the fibers within each layer is oriented at right angles to the adjacent layer.
The surface is pre-finished with several layers of UV hardened acrylic lacquer free from formaldehyde and solvents.
1-strip plank, with / without bevelled edge, MIKASA PlankLocTM glue free joint on all edges. Surface layer consists of sliced or rotary cut strips of hardwood and a backing of pine / spruce veneer.
1, 2 & 3-strip plank with / without bevelled edges. MIKASA PlankLocTM glue free joint on all edges. Surface layer consists of sliced strips of hardwood and a backing of pine / spruce veneer.
The top layer is made of select hardwood and is up to 3.0 mm in thickness. This allows resanding and refinishing atleast twice. Detailed information about maintenance is included in our Maintenance & Repair Guide. Download it from our website www.mikasafloors.com.
The top layer is made of hardwood and is up to 2.0 mm in thickness. This allows resanding and refinishing atleast once. Detailed information about maintenance is included in our Maintenance & Repair Guide. Download it from our website www.mikasafloors.com.
The top layer is made of hardwood and is up to 0.6 mm in thickness. This does not allow any resanding and refinishing The surface is pre-finished with several layers of UV hardened acrylic lacquer free from formaldehyde and solvents.
Average moisture content at delivery is approximately 7-9%.The boards are delivered free of insects, woodworms etc. This is secured by the process temperatures.
The boards comply more than adequately with the stringent EU E1 norms for formaldehyde emissions.
Wooden floors fulfill the requirements for class G, the highest fire classification for floors as per Swedish Building Code, BBR 94.
Resists most household stains up to 24 hours
Wood is a natural product and changes color with time when exposed to light
Floating / Glue down
Suitable for room temperature (max temperature 27°C), waterborne system or self-regulating electrical system.
The subfloor must be dry, clean, level and solid. The requirements in HusAMA98, Table 43.DC/-1 and MDB.3 apply. Also note our Subfloor Requirements. You can download more details on Subfloor Requirements and Underfloor Heating from our website www.mikasafloors.com.
FinishContent
Classifications
Heating Compatibility
WAR
RANTY
YEARS30
Thickness: Top Layer (Veneer) - 3mm Middle Layer (Pine) - 10mm Balancing Veneer - 2mm
WAR
RANTY
YEARS20
Thickness: Top Layer (Veneer) - 2mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 2mm
WAR
RANTYYEARS10
Thickness: Top Layer (Veneer) - 0.6mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 0.6mm
CITY Oak Berlin
A B C D E
CITY Oak Frankfurt
G
CITY Oak London
B C D E
CITY Oak Vienna
B C D E
CITY Oak Stockholm
A B C D E
CITY Oak Koln
G
CITY Oak Malmoe'
H
CITY Oak Munchen
G
CITY Oak Salzburg
G
CITY Oak Copenhagen
H
CITY Oak Helsinki
H
CITY Oak Nice
H
PALACE Oak Earth
A B C D E EA B C D
PALACE Oak Noir
A B C D E
PALACE Oak Radiant
MANOR Oak Topaz
H
MANOR Oak Amber
H H
MANOR Oak Garnet
H
MANOR Oak Opal
G
ESTATE Oak Sea Shell
ESTATE Oak Fog
G
PALACE Oak Sea Mist
A B C D E G
ESTATE Oak Granit
G
ESTATE Oak Sand ESTATE Oak Steine
G
C E
VERMONT Noce Imperial
G
VERMONT Noce Medio VERMONT Noce Claret
C E
VERMONT Noce Piccolo
H C E
VERMONT Noce Rosso
H
VERMONT Noce Lila VERMONTCanadian Hard Maple
HG
VERMONT Noce Rose
G
SKÅNE Ash Ivory
G
SKÅNE Ash Stardust
A B C D E F G H2400 x 210 (mm)1 Strip
2100 x 185 (mm)1 Strip
2100 x 135 (mm)1 Strip
1800 x 185 (mm)1 Strip
1800 x 135 (mm)1 Strip
1200 x 120 (mm)1 Strip
2400 x 185 (mm)2 Strips
2400 x 195 (mm)3 Strips
Stained Brushed Matt Lacquer Satin Lacquer Smoked Bevelled Edge Micro-Bevelled Edge Square Edge
QUICK REFERENCE GUIDE
C E
VERMONT Noce GrandeFUMOIR Oak Fume
A B C D E
FUMOIR Oak Smokehouse
A B C D EH
MANOR Oak Pearl FUMOIR Oak Moss
H
ROVERE Oak Bronze
FF
ROVERE Oak Choco
F
ROVERE Oak CopperROVERE Oak Glace
F
ROVERE Oak Silver
F
ECLECTIC Ash Fressno
F
ECLECTIC Nussbaum
F
ECLECTIC Nussbaum Roja
F
ECLECTIC Wenge
F
ECLECTIC Wenge Rustico
F
ROVERE Oak Prime
F
ROVERE Oak Native
F
ROVERE Smoked Oak
F
F
EICHE Oak Cigar
F
EICHE Oak Espresso EICHE Oak Tobacco
F
EXOTICSAmerican Walnut Naturale
F
EXOTICSSucupira Naturale
F
EICHE Oak Cappuccino
FF
EICHE Oak CrèmeEICHE Oak Nature
F
EICHE Oak Naturale
F
EXOTICS Smoked Sapele
F
EXOTICS Sapele Naturale
F
EXOTICSMyrtle Naturale
F
EXOTICS Smoked Ash
F
EXOTICSPanga Panga Naturale
F
WAR
RANTY
YEARS30
Thickness: Top Layer (Veneer) - 3mm Middle Layer (Pine) - 10mm Balancing Veneer - 2mm
WAR
RANTY
YEARS20
Thickness: Top Layer (Veneer) - 2mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 2mm
WAR
RANTY
YEARS10
Thickness: Top Layer (Veneer) - 0.6mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 0.6mm
CITY Oak Berlin
A B C D E
CITY Oak Frankfurt
G
CITY Oak London
B C D E
CITY Oak Vienna
B C D E
CITY Oak Stockholm
A B C D E
CITY Oak Koln
G
CITY Oak Malmoe'
H
CITY Oak Munchen
G
CITY Oak Salzburg
G
CITY Oak Copenhagen
H
CITY Oak Helsinki
H
CITY Oak Nice
H
PALACE Oak Earth
A B C D E EA B C D
PALACE Oak Noir
A B C D E
PALACE Oak Radiant
MANOR Oak Topaz
H
MANOR Oak Amber
H H
MANOR Oak Garnet
H
MANOR Oak Opal
G
ESTATE Oak Sea Shell
ESTATE Oak Fog
G
PALACE Oak Sea Mist
A B C D E G
ESTATE Oak Granit
G
ESTATE Oak Sand ESTATE Oak Steine
G
C E
VERMONT Noce Imperial
G
VERMONT Noce Medio VERMONT Noce Claret
C E
VERMONT Noce Piccolo
H C E
VERMONT Noce Rosso
H
VERMONT Noce Lila VERMONTCanadian Hard Maple
HG
VERMONT Noce Rose
G
SKÅNE Ash Ivory
G
SKÅNE Ash Stardust
A B C D E F G H2400 x 210 (mm)1 Strip
2100 x 185 (mm)1 Strip
2100 x 135 (mm)1 Strip
1800 x 185 (mm)1 Strip
1800 x 135 (mm)1 Strip
1200 x 120 (mm)1 Strip
2400 x 185 (mm)2 Strips
2400 x 195 (mm)3 Strips
Stained Brushed Matt Lacquer Satin Lacquer Smoked Bevelled Edge Micro-Bevelled Edge Square Edge
QUICK REFERENCE GUIDE
C E
VERMONT Noce GrandeFUMOIR Oak Fume
A B C D E
FUMOIR Oak Smokehouse
A B C D EH
MANOR Oak Pearl FUMOIR Oak Moss
H
ROVERE Oak Bronze
FF
ROVERE Oak Choco
F
ROVERE Oak CopperROVERE Oak Glace
F
ROVERE Oak Silver
F
ECLECTIC Ash Fressno
F
ECLECTIC Nussbaum
F
ECLECTIC Nussbaum Roja
F
ECLECTIC Wenge
F
ECLECTIC Wenge Rustico
F
ROVERE Oak Prime
F
ROVERE Oak Native
F
ROVERE Smoked Oak
F
F
EICHE Oak Cigar
F
EICHE Oak Espresso EICHE Oak Tobacco
F
EXOTICSAmerican Walnut Naturale
F
EXOTICSSucupira Naturale
F
EICHE Oak Cappuccino
FF
EICHE Oak CrèmeEICHE Oak Nature
F
EICHE Oak Naturale
F
EXOTICS Smoked Sapele
F
EXOTICS Sapele Naturale
F
EXOTICSMyrtle Naturale
F
EXOTICS Smoked Ash
F
EXOTICSPanga Panga Naturale
F
WAR
RANTY
YEARS30
Thickness: Top Layer (Veneer) - 3mm Middle Layer (Pine) - 10mm Balancing Veneer - 2mm
WAR
RANTY
YEARS20
Thickness: Top Layer (Veneer) - 2mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 2mm
WAR
RANTY
YEARS10
Thickness: Top Layer (Veneer) - 0.6mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 0.6mm
CITY Oak Berlin
A B C D E
CITY Oak Frankfurt
G
CITY Oak London
B C D E
CITY Oak Vienna
B C D E
CITY Oak Stockholm
A B C D E
CITY Oak Koln
G
CITY Oak Malmoe'
H
CITY Oak Munchen
G
CITY Oak Salzburg
G
CITY Oak Copenhagen
H
CITY Oak Helsinki
H
CITY Oak Nice
H
PALACE Oak Earth
A B C D E EA B C D
PALACE Oak Noir
A B C D E
PALACE Oak Radiant
MANOR Oak Topaz
H
MANOR Oak Amber
H H
MANOR Oak Garnet
H
MANOR Oak Opal
G
ESTATE Oak Sea Shell
ESTATE Oak Fog
G
PALACE Oak Sea Mist
A B C D E G
ESTATE Oak Granit
G
ESTATE Oak Sand ESTATE Oak Steine
G
C E
VERMONT Noce Imperial
G
VERMONT Noce Medio VERMONT Noce Claret
C E
VERMONT Noce Piccolo
H C E
VERMONT Noce Rosso
H
VERMONT Noce Lila VERMONTCanadian Hard Maple
HG
VERMONT Noce Rose
G
SKÅNE Ash Ivory
G
SKÅNE Ash Stardust
A B C D E F G H2400 x 210 (mm)1 Strip
2100 x 185 (mm)1 Strip
2100 x 135 (mm)1 Strip
1800 x 185 (mm)1 Strip
1800 x 135 (mm)1 Strip
1200 x 120 (mm)1 Strip
2400 x 185 (mm)2 Strips
2400 x 195 (mm)3 Strips
Stained Brushed Matt Lacquer Satin Lacquer Smoked Bevelled Edge Micro-Bevelled Edge Square Edge
QUICK REFERENCE GUIDE
C E
VERMONT Noce GrandeFUMOIR Oak Fume
A B C D E
FUMOIR Oak Smokehouse
A B C D EH
MANOR Oak Pearl FUMOIR Oak Moss
H
ROVERE Oak Bronze
FF
ROVERE Oak Choco
F
ROVERE Oak CopperROVERE Oak Glace
F
ROVERE Oak Silver
F
ECLECTIC Ash Fressno
F
ECLECTIC Nussbaum
F
ECLECTIC Nussbaum Roja
F
ECLECTIC Wenge
F
ECLECTIC Wenge Rustico
F
ROVERE Oak Prime
F
ROVERE Oak Native
F
ROVERE Smoked Oak
F
F
EICHE Oak Cigar
F
EICHE Oak Espresso EICHE Oak Tobacco
F
EXOTICSAmerican Walnut Naturale
F
EXOTICSSucupira Naturale
F
EICHE Oak Cappuccino
FF
EICHE Oak CrèmeEICHE Oak Nature
F
EICHE Oak Naturale
F
EXOTICS Smoked Sapele
F
EXOTICS Sapele Naturale
F
EXOTICSMyrtle Naturale
F
EXOTICS Smoked Ash
F
EXOTICSPanga Panga Naturale
F
WAR
RANTY
YEARS30
Thickness: Top Layer (Veneer) - 3mm Middle Layer (Pine) - 10mm Balancing Veneer - 2mm
WAR
RANTY
YEARS20
Thickness: Top Layer (Veneer) - 2mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 2mm
WAR
RANTY
YEARS10
Thickness: Top Layer (Veneer) - 0.6mm Middle Layer (HDF Core) - 9mm Balancing Veneer - 0.6mm
CITY Oak Berlin
A B C D E
CITY Oak Frankfurt
G
CITY Oak London
B C D E
CITY Oak Vienna
B C D E
CITY Oak Stockholm
A B C D E
CITY Oak Koln
G
CITY Oak Malmoe'
H
CITY Oak Munchen
G
CITY Oak Salzburg
G
CITY Oak Copenhagen
H
CITY Oak Helsinki
H
CITY Oak Nice
H
PALACE Oak Earth
A B C D E EA B C D
PALACE Oak Noir
A B C D E
PALACE Oak Radiant
MANOR Oak Topaz
H
MANOR Oak Amber
H H
MANOR Oak Garnet
H
MANOR Oak Opal
G
ESTATE Oak Sea Shell
ESTATE Oak Fog
G
PALACE Oak Sea Mist
A B C D E G
ESTATE Oak Granit
G
ESTATE Oak Sand ESTATE Oak Steine
G
C E
VERMONT Noce Imperial
G
VERMONT Noce Medio VERMONT Noce Claret
C E
VERMONT Noce Piccolo
H C E
VERMONT Noce Rosso
H
VERMONT Noce Lila VERMONTCanadian Hard Maple
HG
VERMONT Noce Rose
G
SKÅNE Ash Ivory
G
SKÅNE Ash Stardust
A B C D E F G H2400 x 210 (mm)1 Strip
2100 x 185 (mm)1 Strip
2100 x 135 (mm)1 Strip
1800 x 185 (mm)1 Strip
1800 x 135 (mm)1 Strip
1200 x 120 (mm)1 Strip
2400 x 185 (mm)2 Strips
2400 x 195 (mm)3 Strips
Stained Brushed Matt Lacquer Satin Lacquer Smoked Bevelled Edge Micro-Bevelled Edge Square Edge
QUICK REFERENCE GUIDE
C E
VERMONT Noce GrandeFUMOIR Oak Fume
A B C D E
FUMOIR Oak Smokehouse
A B C D EH
MANOR Oak Pearl FUMOIR Oak Moss
H
ROVERE Oak Bronze
FF
ROVERE Oak Choco
F
ROVERE Oak CopperROVERE Oak Glace
F
ROVERE Oak Silver
F
ECLECTIC Ash Fressno
F
ECLECTIC Nussbaum
F
ECLECTIC Nussbaum Roja
F
ECLECTIC Wenge
F
ECLECTIC Wenge Rustico
F
ROVERE Oak Prime
F
ROVERE Oak Native
F
ROVERE Smoked Oak
F
F
EICHE Oak Cigar
F
EICHE Oak Espresso EICHE Oak Tobacco
F
EXOTICSAmerican Walnut Naturale
F
EXOTICSSucupira Naturale
F
EICHE Oak Cappuccino
FF
EICHE Oak CrèmeEICHE Oak Nature
F
EICHE Oak Naturale
F
EXOTICS Smoked Sapele
F
EXOTICS Sapele Naturale
F
EXOTICSMyrtle Naturale
F
EXOTICS Smoked Ash
F
EXOTICSPanga Panga Naturale
F
THE FINE ART OF FLOORING
Excellence In Every LayerMikasa floors consist of three layers composed of Real Hard Wood, Stabilizing Core and
Balancing Layer. Put together using the most modern technology, this construction provides
solidity and stability to every plank while restricting the expansion and contraction of wood
and giving your floor the resilience to stand the test of time and climate.
A revolutionary technology that locks two planks together without using glue, ensuring that the
joints that bind the two planks never open up. allows for ease of installation, giving a
seamless look to your floor that withstands the effects of seasonal change and foot traffic.
The Bond That Lasts Forever
youtube.com/mikasafl oorstwitter.com/mikasafl oorsfacebook.com/mikasafl oors
Greenlam Industries Limited,1501-05, Narain Manzil, 23, Barakhamba Road, New Delhi 110001, IndiaT: +91-11-42791399 E: [email protected]
Due to printing limitations product colour and texture reproduced in this brochure may vary from actual product. We, recommend you to please refer actual product for exact grain patterns and shades.
www.mikasafl oors.com
Volume1
The Magic Of Real Wood. The Reassurance Of Technology.Greenlam Industries Limited. It has been beautifying spaces for years by infusing creativity into every piece of work and turning it into sheer pieces of beauty and brilliance. A name to be reckoned with in surfacing products in more than 100 countries, Greenlam Industries Limited is standing tall with its guiding philosophies of Innovative technologies and Creative solutions.
Carrying the legacy forward, Greenlam takes pleasure in presenting Mikasa, real wood floors, produced in India for the first time at its fully-integrated plant at Behror, Rajasthan.
Mikasa is inspired by wood. Each piece of wood, naturally beautiful, is further enhanced using the latest technology, thus bringing out the true character of the wood and presenting it to you in its full glory.
We create the finest floors. For those who have the finest taste.
Stabilising Core
Balancing Layer
Real Hard Wood
MikasaADDOur principles forsourcing wood fromacross the globe.
AVAILABILITY
To ensure you have access to most popular wood species from across the globe.
DESIGN
So that your floor becomes on integral
part of your total décor.
DURABILITY
To enhance the nature of wood by using
the latest technology.
Thickness (mm)
Veneer Thickness (mm)
Plank Dimensions (mm)
Configuration
Wood Species
No. of Planks / Pack
Sq.Mtrs / Pack
Weight / Pack (Kg)
Joint
Core Material
Finish
Warranty*
15
Up to 3.0
Width: 135-210 Length: 1800-2400
1, 2 & 3 Strips
Oak, Walnut, Maple Ash and other exotic species
06 Planks
1.46 m2 - 3.02 m2
12.80 -23.40
PlankLocTM, Glueless
Pine
Brushed, Matt and Satin
30 Years in a residential environment. Check for Warranty in commercial applications.
13
Up to 2.0
Width: 120 Length: 200
1 Strip
06 Planks
0.86 m2
10.80
High Density Fiber Board
20 Years in a residential environment. Check for Warranty in commercial applications.
10
Up to 0.6
Width: 120 Length: 1200
1 Strip
08 Planks
1.15 m2
9.85
High Density Fiber Board
10 Years in a residential environment. Check for Warranty in commercial applications.
TECHNICAL INFORMATION
PRODUCT CHARACTERISTICS
Boards are constructed in 3 layers in order to minimize expansion and contraction within the floorboard. The direction of the fibers within each layer is oriented at right angles to the adjacent layer.
The surface is pre-finished with several layers of UV hardened acrylic lacquer free from formaldehyde and solvents.
1-strip plank, with / without bevelled edge, MIKASA PlankLocTM glue free joint on all edges. Surface layer consists of sliced or rotary cut strips of hardwood and a backing of pine / spruce veneer.
1, 2 & 3-strip plank with / without bevelled edges. MIKASA PlankLocTM glue free joint on all edges. Surface layer consists of sliced strips of hardwood and a backing of pine / spruce veneer.
The top layer is made of select hardwood and is up to 3.0 mm in thickness. This allows resanding and refinishing atleast twice. Detailed information about maintenance is included in our Maintenance & Repair Guide. Download it from our website www.mikasafloors.com.
The top layer is made of hardwood and is up to 2.0 mm in thickness. This allows resanding and refinishing atleast once. Detailed information about maintenance is included in our Maintenance & Repair Guide. Download it from our website www.mikasafloors.com.
The top layer is made of hardwood and is up to 0.6 mm in thickness. This does not allow any resanding and refinishing The surface is pre-finished with several layers of UV hardened acrylic lacquer free from formaldehyde and solvents.
Average moisture content at delivery is approximately 7-9%.The boards are delivered free of insects, woodworms etc. This is secured by the process temperatures.
The boards comply more than adequately with the stringent EU E1 norms for formaldehyde emissions.
Wooden floors fulfill the requirements for class G, the highest fire classification for floors as per Swedish Building Code, BBR 94.
Resists most household stains up to 24 hours
Wood is a natural product and changes color with time when exposed to light
Floating / Glue down
Suitable for room temperature (max temperature 27°C), waterborne system or self-regulating electrical system.
The subfloor must be dry, clean, level and solid. The requirements in HusAMA98, Table 43.DC/-1 and MDB.3 apply. Also note our Subfloor Requirements. You can download more details on Subfloor Requirements and Underfloor Heating from our website www.mikasafloors.com.
FinishContent
Classifications
Heating Compatibility