THE DENTAL ADVISOR Proclinic VPS THE DENTAL ADVISOR ...
Transcript of THE DENTAL ADVISOR Proclinic VPS THE DENTAL ADVISOR ...
L R
56º
6º
87%
IMPRESIONES
FÁCILES Y PRECISAS
IMPRESIONANTEMENTE
En cualquier técnica:uno o dos pasos y monofase
Las siliconas Proclinic Expert cuentan con la recomendación de los profesionales:
Las siliconas Proclinic Expert consiguen una excelente nota en los tests clínicos
373 87%373Dr. Eduardo González Arroyo Clínica Fernández www.oralsurgerytube.com Número colegiado 28007247
“Estas siliconas tienen un nivel de calidad superior a las anteriores siliconas de marca Proclinic que utilizaba habitualmente.”
Dr. Alexander Johansson Clínica ZahnCity GmBH, Zurich, Suiza www.zahncity.ch
“Nunca había probado antes una silicona ultra ligera y he encontrado que la silicona Proclinic Expert Ultra Light Body es mejor que la silicona Light Body que uso habitualmente.”
APLICACIONESCLÍNICAS
de los consultores consideraronlas siliconas Proclinic Expert
que las que utilizaban habitualmente
TAN BUENAS O MEJORES
78 %DE RECOMENDACIÓN
THE DENTAL ADVISORwww.dentaladvisor.com
RATINGS:
ExcellentVery GoodGood
+ + + + + + + + ++ + +
© 2015 Dental Consultants, Inc. THE DENTAL ADVISOR 3110 West Liberty, Ann Arbor, Michigan 48103 (800) 347-1330 [email protected]
Proclinic VPS Impression Material
Proclinicwww.proclinic-products.com
Description Proclinic VPS Impression Material is an addition silicone impression material that includes a variety of viscosities and two setting times. It features particles with nanometric size and structure in all viscosities to obtain a silicone-nanoparticle
e presence of the nanostructure is reported to increase the fl uidity of the material, particularly when pressure is applied. All viscosities exhibit a snap set that helps reduce inaccuracies that may occur from movement during setting
e light, super light, and regular body are available in 50 mL automix cartridges in a normal and/or fast set. Tray material is also available for use with the Pentamix system. Putty is available in a normal and fast set in 250 mL.
e working time for normal set is 2 minutes and setting time e working time for fast set is 1:30 minutes
and setting time is 4 minutes. Twenty-three consultants evaluated Proclinic VPS Impression Material in 373 clinical
is impression material received a 91% clinical rating.
Product Features Dispensing all viscosities of Proclinic VPS Impression Material from the automix cartridges is consistent and does
e light-bodied consistency was rated very good and exhibited good fl ow around the prepared teeth without slumping. Both the normal set and the fast set have su� cient working times, while the setting times vary from 4 minutes for the fast set to 5:30 for the normal set. When an impression of multiple preparations is needed, the normal set is a good option. Any combination of the viscosities is easily removed from the mouth and all show good tear resistance even in thin sections. Visualizing margin detail is simplifi ed by the excellent color contrast of the di� e fi t of the resultant restorations was judged to be very good. Eighty-seven percent of the consultants rated Proclinic VPS Impression Material equivalent to or better than the material they were currently using and 78% would recommend it.
Consultants’ Comments
“I really like the color contrast – margins are easy to read.”
e light-bodied consistency stays in place and registers margins well.”
e light-bodied consistency has excellent detail and appears to have good tear strength.”
“Assistants found the putty easier to mix than other brands.”
“Impressions separate easily from their models.”
Clinical Tips• e putty requires mixing with washed hands or using non-
latex gloves.
• If the provisional restoration is fabricated before making the impression, completely remove residue from the teeth. Acrylic residue can inhibit the setting of the material.
91%DE SATISFACCIÓN
I www.proclinic.es I 900 39 39 39 I [email protected] I
Dr. Carlos Gargallo Clínica Carlos Gargallo Número colegiado 3947
“La gama de siliconas Proclinic Expert se comporta muy satisfactoriamente en todas las técnicas de impresiones habituales. Tanto si son tipo Regular Body como Ultra Light Body ofrecen un grado de detalle, consistencia y manejo muy buenos, ideales para prótesis fija, ortodoncia invisible y rebases. Si realizamos doble impresión, las siliconas Proclinic Expert Putty manuales y de mezcla automática se recortan fácilmente con bisturí.”
THE DENTAL ADVISORwww.dentaladvisor.com
RATINGS:
ExcellentVery GoodGood
+ + + + + + + + ++ + +
© 2015 Dental Consultants, Inc. THE DENTAL ADVISOR 3110 West Liberty, Ann Arbor, Michigan 48103 (800) 347-1330 [email protected]
Proclinic VPS Impression Material
Proclinicwww.proclinic-products.com
Description Proclinic VPS Impression Material is an addition silicone impression material that includes a variety of viscosities and two setting times. It features particles with nanometric size and structure in all viscosities to obtain a silicone-nanoparticle
e presence of the nanostructure is reported to increase the fl uidity of the material, particularly when pressure is applied. All viscosities exhibit a snap set that helps reduce inaccuracies that may occur from movement during setting
e light, super light, and regular body are available in 50 mL automix cartridges in a normal and/or fast set. Tray material is also available for use with the Pentamix system. Putty is available in a normal and fast set in 250 mL.
e working time for normal set is 2 minutes and setting time e working time for fast set is 1:30 minutes
and setting time is 4 minutes. Twenty-three consultants evaluated Proclinic VPS Impression Material in 373 clinical
is impression material received a 91% clinical rating.
Product Features Dispensing all viscosities of Proclinic VPS Impression Material from the automix cartridges is consistent and does
e light-bodied consistency was rated very good and exhibited good fl ow around the prepared teeth without slumping. Both the normal set and the fast set have su� cient working times, while the setting times vary from 4 minutes for the fast set to 5:30 for the normal set. When an impression of multiple preparations is needed, the normal set is a good option. Any combination of the viscosities is easily removed from the mouth and all show good tear resistance even in thin sections. Visualizing margin detail is simplifi ed by the excellent color contrast of the di� e fi t of the resultant restorations was judged to be very good. Eighty-seven percent of the consultants rated Proclinic VPS Impression Material equivalent to or better than the material they were currently using and 78% would recommend it.
Consultants’ Comments
“I really like the color contrast – margins are easy to read.”
e light-bodied consistency stays in place and registers margins well.”
e light-bodied consistency has excellent detail and appears to have good tear strength.”
“Assistants found the putty easier to mix than other brands.”
“Impressions separate easily from their models.”
Clinical Tips• e putty requires mixing with washed hands or using non-
latex gloves.
• If the provisional restoration is fabricated before making the impression, completely remove residue from the teeth. Acrylic residue can inhibit the setting of the material.
THE DENTAL ADVISORwww.dentaladvisor.com
RATINGS:
ExcellentVery GoodGood
+ + + + + + + + ++ + +
© 2015 Dental Consultants, Inc. THE DENTAL ADVISOR 3110 West Liberty, Ann Arbor, Michigan 48103 (800) 347-1330 [email protected]
Proclinic VPS Impression Material
Proclinicwww.proclinic-products.com
Description Proclinic VPS Impression Material is an addition silicone impression material that includes a variety of viscosities and two setting times. It features particles with nanometric size and structure in all viscosities to obtain a silicone-nanoparticle
e presence of the nanostructure is reported to increase the fl uidity of the material, particularly when pressure is applied. All viscosities exhibit a snap set that helps reduce inaccuracies that may occur from movement during setting
e light, super light, and regular body are available in 50 mL automix cartridges in a normal and/or fast set. Tray material is also available for use with the Pentamix system. Putty is available in a normal and fast set in 250 mL.
e working time for normal set is 2 minutes and setting time e working time for fast set is 1:30 minutes
and setting time is 4 minutes. Twenty-three consultants evaluated Proclinic VPS Impression Material in 373 clinical
is impression material received a 91% clinical rating.
Product Features Dispensing all viscosities of Proclinic VPS Impression Material from the automix cartridges is consistent and does
e light-bodied consistency was rated very good and exhibited good fl ow around the prepared teeth without slumping. Both the normal set and the fast set have su� cient working times, while the setting times vary from 4 minutes for the fast set to 5:30 for the normal set. When an impression of multiple preparations is needed, the normal set is a good option. Any combination of the viscosities is easily removed from the mouth and all show good tear resistance even in thin sections. Visualizing margin detail is simplifi ed by the excellent color contrast of the di� e fi t of the resultant restorations was judged to be very good. Eighty-seven percent of the consultants rated Proclinic VPS Impression Material equivalent to or better than the material they were currently using and 78% would recommend it.
Consultants’ Comments
“I really like the color contrast – margins are easy to read.”
e light-bodied consistency stays in place and registers margins well.”
e light-bodied consistency has excellent detail and appears to have good tear strength.”
“Assistants found the putty easier to mix than other brands.”
“Impressions separate easily from their models.”
Clinical Tips• e putty requires mixing with washed hands or using non-
latex gloves.
• If the provisional restoration is fabricated before making the impression, completely remove residue from the teeth. Acrylic residue can inhibit the setting of the material.
THE DENTAL ADVISORwww.dentaladvisor.com
RATINGS:
ExcellentVery GoodGood
+ + + + + + + + ++ + +
© 2015 Dental Consultants, Inc. THE DENTAL ADVISOR 3110 West Liberty, Ann Arbor, Michigan 48103 (800) 347-1330 [email protected]
Proclinic VPS Impression Material
Proclinicwww.proclinic-products.com
Description Proclinic VPS Impression Material is an addition silicone impression material that includes a variety of viscosities and two setting times. It features particles with nanometric size and structure in all viscosities to obtain a silicone-nanoparticle
e presence of the nanostructure is reported to increase the fl uidity of the material, particularly when pressure is applied. All viscosities exhibit a snap set that helps reduce inaccuracies that may occur from movement during setting
e light, super light, and regular body are available in 50 mL automix cartridges in a normal and/or fast set. Tray material is also available for use with the Pentamix system. Putty is available in a normal and fast set in 250 mL.
e working time for normal set is 2 minutes and setting time e working time for fast set is 1:30 minutes
and setting time is 4 minutes. Twenty-three consultants evaluated Proclinic VPS Impression Material in 373 clinical
is impression material received a 91% clinical rating.
Product Features Dispensing all viscosities of Proclinic VPS Impression Material from the automix cartridges is consistent and does
e light-bodied consistency was rated very good and exhibited good fl ow around the prepared teeth without slumping. Both the normal set and the fast set have su� cient working times, while the setting times vary from 4 minutes for the fast set to 5:30 for the normal set. When an impression of multiple preparations is needed, the normal set is a good option. Any combination of the viscosities is easily removed from the mouth and all show good tear resistance even in thin sections. Visualizing margin detail is simplifi ed by the excellent color contrast of the di� e fi t of the resultant restorations was judged to be very good. Eighty-seven percent of the consultants rated Proclinic VPS Impression Material equivalent to or better than the material they were currently using and 78% would recommend it.
Consultants’ Comments
“I really like the color contrast – margins are easy to read.”
e light-bodied consistency stays in place and registers margins well.”
e light-bodied consistency has excellent detail and appears to have good tear strength.”
“Assistants found the putty easier to mix than other brands.”
“Impressions separate easily from their models.”
Clinical Tips• e putty requires mixing with washed hands or using non-
latex gloves.
• If the provisional restoration is fabricated before making the impression, completely remove residue from the teeth. Acrylic residue can inhibit the setting of the material.
Reorder
ISO 4823
ADA 19
Proporción mezcla
Sistema
Tipo de mezcla
Tiempo total de trabajo
Permanencia mínima en boca
Tiempo de fraguado*
Deformación por presión (min – max)
Memoria elástica
Variación dimensional lineal
24 horas
Dureza “Shore A”
Técnicas sugeridas
ALTA CONSISTENCIA
Ultra Light Body
*Tiempos a 23º C
BAJA CONSISTENCIA
Light Body
380 Heavy Body
Light Body
380 Heavy Body
Putty Soft
Regular Body
380 Putty Soft
Putty Soft
Fast Set
15156
Type 3
Light-bodied Consistency
1:1
Auto mixing system
1’30’’
2’30’’
4’
3 – 5%
> 99,5%
< 0,20%
45±2
2 pasos
Regular Set
15153
Type 3
Light-bodied Consistency
1:1
Auto mixing system
2’
3’30’’
5’30’’
3 – 5%
> 99,5%
< 0,20%
45±2
1 paso o 2 pasos
Regular Set
15158
Type 1
Heavy-bodied Consistency
5:1
Auto mixing system
2’
3’30’’
5’30’’
3 – 5%
> 99,5%
< 0,20%
60±2
1 paso o 2 pasos
Fast Set
15154
Type 3
Light-bodied Consistency
1:1
Auto mixing system
1’30’’
2’30’’
4’
3 – 5%
> 99,5%
< 0,20%
45±2
1 paso o 2 pasos
Fast Set
15159
Type 1
Heavy-bodied Consistency
5:1
Auto mixing system
1’30’’
2’30’’
4’
3 – 5%
> 99,5%
< 0,20%
60±2
1 paso o 2 pasos
Regular Set
15150
Type 0
Putty Consistency
1:1
Hand mixing
2’
3’30’’
5’30’’
1– 3%
> 99%
< 0,20%
60±2
1 paso o 2 pasos
Regular Set
15152
Type 2
Medium-bodied Consistency
1:1
Auto mixing system
2’
3’30’’
5’30’’
3 – 5%
> 99,5%
< 0,20%
45±2
1 paso o monofase
Fast Set
15157
Type 0
Putty Consistency
5:1
Auto mixing system
1’30’’
2’30’’
4’
1– 3%
> 99%
< 0,20%
60±2
1 paso o 2 pasos
Fast Set
15151
Type 0
Putty Consistency
1:1
Hand mixing
1’30’’
2’30’’
4’
1– 3%
> 99%
< 0,20%
60±2
1 paso o 2 pasos
Alta hidrofilia, ángulo
de contacto menor a 10º
Las siliconas Proclinic Expert te garantizan la máxima precisión y calidad
La combinación de la nanotecnología y la hidrofilia de su material te ofrecen impresiones detalladas, exactitud dimensional asegurada
y total integridad de los márgenes.
Las siliconas Proclinic Expert permiten una toma de impresiones fácil y rápida
Con tiempos correctamente modulados y diferentes viscosidades para cada necesidad clínica.
Excelente reproducción del detalle en ambiente húmedo, alta hidrofilia que minimiza el riesgo de poros. Consiga impresiones de gran precisión gracias
a las excelentes propiedades de las siliconas Proclinic Expert.
Complete su gama de siliconas con la silicona Proclinic Expert para el Registro de Mordida. Una silicona de dureza 95 Shore A (15160) que garantiza una excelente reproducción de detalles.
Las siliconas Proclinic Expert se adaptan a todas las técnicas
de impresión
Imágenes explicativas de los casos a nivel informativo. Son fotografías sobre modelo no indicativas de verdaderos casos clínicos.
Excelente reproducción
de detalles
Gran elasticidad y resistencia al desgarro
Versátil para las
técnicas de 1 y 2 pasos y monofase
Perfecta tixotropía,
sin burbujasni goteo
PR
EC
IS
IÓ
N
Y
CA
LI
DA
D
FA
CI
LI
DA
D
Y
VA
RI
ED
AD
10º
TÉCNICA DE UN PASO
TÉCNICA DE DOS PASOS
1
1
2
2 4
3
3
Tiempo Permanencia LIGHT BODY FAST de trabajo mínima en boca 1’30’’ 2’30’’
Tiempo Permanencia PUTTY SOFT FAST de trabajo mínima en boca 1’30’’ 2’30’’
Tiempo Permanencia PUTTY SOFT REGULAR de trabajo mínima en boca 2’ 3’30’’
Tiempo Permanencia ULTRA LIGHT BODY de trabajo mínima en boca 1’30’’ 2’30’’
1 2 3
Saliva
Encía
Diente
THE DENTAL ADVISORwww.dentaladvisor.com
RATINGS:
ExcellentVery GoodGood
+ + + + + + + + ++ + +
© 2015 Dental Consultants, Inc. THE DENTAL ADVISOR 3110 West Liberty, Ann Arbor, Michigan 48103 (800) 347-1330 [email protected]
Proclinic Bulk Fill
Proclinicwww.proclinic-products.com
Description Proclinic Bulk Fill is a light cured, radiopaque composite that adopts a systematic and scientifi c approach to shade arrangement. Proclinic Bulk Fill composite can be cured to a maximum of 4 mm in 20 seconds with an LED curing light or 40 seconds with a halogen light. Proclinic Bulk Fill composite is available in 4 g syringes and 0.25 g unit dose capsules. Proclinic Bulk Fill was evaluated by nine editors in 345 uses. Th is composite system earned a 91% clinical rating.
Clinical Observations Instructions/PackagingSyringes and capsules of Proclinic Bulk Fill are labeled completely with name and expiration date. Unit-dose capsules are boxed in clear plastic containers that are easy to store.
HandlingProclinic Bulk Fill nano-hybrid composite handles extremely well. Th e viscosity has suffi cient body for packing without being too stiff . Sculpting anatomy can be done with no sticking of the instrument to the composite.
EstheticsProclinic Bulk Fill shades blend well with the tooth, and they all polish well. Proclinic Bulk Fill is fairly translucent but was reported to be acceptable for most posterior applications.
Consultants’ Comments
“Th e handling properties of Proclinic Bulk Fill are very good.”
“Proclinic Bulk Fill has a 4 mm depth of cure.”
“Capsule design and color coding are perfect.”
“Final esthetics was great.”
“Shading in a typical posterior tooth is not crucial and this bulk-fi ll composie blends very nicely with moderately sized fi llings.”
Percentage of Consultants Who Would:Compared to Competitive Products
from Manufacturer’s Brands:Key Features:
THE DENTAL ADVISORwww.dentaladvisor.com
RATINGS:
ExcellentVery GoodGood
+ + + + + + + + ++ + +
© 2015 Dental Consultants, Inc. THE DENTAL ADVISOR 3110 West Liberty, Ann Arbor, Michigan 48103 (800) 347-1330 [email protected]
Proclinic Bulk Fill
Proclinicwww.proclinic-products.com
Description Proclinic Bulk Fill is a light cured, radiopaque composite that adopts a systematic and scientifi c approach to shade arrangement. Proclinic Bulk Fill composite can be cured to a maximum of 4 mm in 20 seconds with an LED curing light or 40 seconds with a halogen light. Proclinic Bulk Fill composite is available in 4 g syringes and 0.25 g unit dose capsules. Proclinic Bulk Fill was evaluated by nine editors in 345 uses. Th is composite system earned a 91% clinical rating.
Clinical Observations Instructions/PackagingSyringes and capsules of Proclinic Bulk Fill are labeled completely with name and expiration date. Unit-dose capsules are boxed in clear plastic containers that are easy to store.
HandlingProclinic Bulk Fill nano-hybrid composite handles extremely well. Th e viscosity has suffi cient body for packing without being too stiff . Sculpting anatomy can be done with no sticking of the instrument to the composite.
EstheticsProclinic Bulk Fill shades blend well with the tooth, and they all polish well. Proclinic Bulk Fill is fairly translucent but was reported to be acceptable for most posterior applications.
Consultants’ Comments
“Th e handling properties of Proclinic Bulk Fill are very good.”
“Proclinic Bulk Fill has a 4 mm depth of cure.”
“Capsule design and color coding are perfect.”
“Final esthetics was great.”
“Shading in a typical posterior tooth is not crucial and this bulk-fi ll composie blends very nicely with moderately sized fi llings.”
Percentage of Consultants Who Would:Compared to Competitive Products
from Manufacturer’s Brands:Key Features: