The DatasheetArchive - Datasheet Search Engine...598-PM88 1 598-PM118 1 598-PM1111 1 Outside...
Transcript of The DatasheetArchive - Datasheet Search Engine...598-PM88 1 598-PM118 1 598-PM1111 1 Outside...
ENCLOSURESSELECTION GUIDE
DEFINITE-PURPOSE STYLE ENCLOSURES
Designed for commercial, OEM, and light industrial applications for use as electrical control
housing, electrical junction boxes, or terminal wiring enclosures. The enclosure features:
■ Aesthetically streamlined lift-off screw cover and hinged design ■ cULus and CE listing and Type 3R, 4, 4X, 12 and 13; IP66 rating■ Superior seamless foam-in-place gasket seal ■ Cost-effective solution
BULLETIN 800H AND 598 PUSH BUTTON ENCLOSURES■ An extension of the current Bulletin 800T/800H/800F
push button enclosure line
■ Designed to house 30.5 mm or 22.5 mm push buttons
■ Available in 1-hole, 2-hole, 3-hole, and 4-hole configurations
■ Cover and base are keyed to ensure proper installation
■ Available in gray and yellow colors
■ Horizontal or vertical mounting
■ Yellow enclosures are suitable for e-stop applications requiring
a yellow background and/or applications requiring higher
visibility of the push button station
BULLETIN 598 GENERAL-PURPOSE ENCLOSURE■ Available in two designs:
• Screw cover design
- Solid covers available in 11 sizes
- Clear covers available in 8 sizes
• Hinged cover design
- Available in 8 sizes
- Available in both clear and solid covers
- Enclosures equipped with stainless steel hinges and
press-to-release latches
■ Available with optional plastic or metal mouting plate
■ Typical applications: material handling, HVAC, chemical processing,
wastewater treatment, food processing, and instrumentation.
BULLETIN 598 JUNCTION BOX■ Available in six sizes up to 190 mm x 190 mm x 130 mm
(8 in. x 8 in. x 5 in.)
■ Available with optional plastic or metal mounting plate
■ Typical applications - material handling systems,
telecommunication, on-machine control, HVAC,
packaging, and instrumentation
p. 3
p. 12
p. 8
ALLEN-BRADLEYDEFINITE-PURPOSE STYLE ENCLOSURES
COVER AND BASE■ Type 3R, 4, 4X, 12 and 13; IP66 rating
■ Lower cost solution compared to traditional
sheet metal and fiberglass polyester
■ Lightweight and easy to install
■ Aesthetically streamlined gray finish
for a stylish appearance
HARDWARE■ Stainless steel mounting
plate hardware and
ground screw are
furnished for added
convenience
METAL MOUNTING PLATE■ Metal mounting plate for added flexibility
GASKET■ Seamless foam-in-place
gasket with tongue and
groove design provides
superior sealing
performance
COVER SCREWS■ Captive cover screws for ease
of maintenance and installation
■ Corrosion-resistant materials
ENCLOSUREFEATURES AND BENEFITS
PLASTIC MOUNTING PLATE■ Unique plastic mounting plate with
grid design for ease and cost-effective
component installation
MOUNTING PROVISION■ Threaded brass inserts for added strength
and stability are provided for installing
mounting plate or DIN Rail
MATERIAL■ Bases and covers are constructed
of UV stabilized polyester blended
material suitable for both indoor
and outdoor applications
■ Excellent chemical resistant properties
for a wide range of applications
■ Easily drilled, cut, or punched for
custom configurations
EXTERNAL MOUNTINGBRACKET■ Stainless steel
■ Ease of enclosure installation
Bulletin 598
Definite-Purpose Style Enclosures
3Visit our website: www.ab.com/catalogs
Overview/Specifications
Bulletin 598 — General Purpose Enclosure
Standards andCertifications
Technical Specifications
Product Certification
Approvals/Certifications cULus, CE
Degree of Protection Type 3R, 4, 4X, 12, and 13, IP66
Environmental
Storage Temperature Range -40…75°C (-40…158°F)
Operating Temperature Range -40…55°C (-40…131°F)
Material
Enclosure — Solid Base & Cover Thermoplastic Polyester blend, UL94 5VA
Enclosure — Clear Cover Polycarbonate, UL94 V-0
Gasket Foam-in-place polyurethane
Plastic Mounting Plate ABS
Metal Mounting Plate Steel plus zinc with chromate plating
Mounting Plate Hardware(included with enclosure) Stainless Steel
Mounting Provision Brass
External Mounting Bracket Stainless Steel
Hinges & Latches Stainless Steel
Note: In applications where there is shock and vibration, use of metal mounting plate isrecommended.
Type 3R, 4, 4X, 12, and 13 rainproof, watertight, corrosion resistant,and dusttight, IP66 protectionDesigned for use as automation control box, electrical controlhousing, and terminal wiring box in industrial and commercialapplicationsAvailable with optional plastic or metal mounting platesProvision for mounting using either AB or DIN RailEnclosure can accommodate both panel mount and rail mountterminal blocksDesigned for use in both indoor and outdoor applications
cULusCEUL 508CSA C22.2 No. 14
Table of Contents
Product Selection ...... 4ApproximateDimensions................... 17
Bulletin 598
Definite-Purpose Style Enclosures
4 Visit our website: www.ab.com/catalogs
Product Selection
Cat. No. 598-BS533 Cat. No. 598-BS733 Cat. No. 598-BS933
Enclosure Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
598-BS533 1 598-BS733 1 598-BS933 1
Outside Dimensions(H x W x D)
130 x 80 x 85 mm(5.12 x 3.15 x 3.35 in.)
180 x 80 x 85 mm(7.09 x 3.15 x 3.35 in.)
250 x 80 x 85 mm(9.84 x 3.15 x 3.35 in.)
Base Depth 50 mm (1.97 in.) 50 mm (1.97 in.) 50 mm (1.97 in.)
Cover Depth 35 mm (1.38 in.) 35 mm (1.38 in.) 35 mm (1.38 in.)
Cover Screw Material Glass-Reinforced Nylon Glass-Reinforced Nylon Glass-Reinforced Nylon
Recommended TighteningTorque 1.0…1.2 N•m (9…11 lb-in.) 1.0…1.2 N•m (9…11 lb-in.) 1.0…1.2 N•m (9…11 lb-in.)
Approx. Ship Weight 271 g (0.60 lb) 357 g (0.79 lb) 435 g (0.96 lb)
598-PP53 1 598-PP73 1 598-PP93 1
Outside Dimension(H x W x Thickness)
116 x 68 x 3.5 mm(4.57 x 2.68 x 0.14 in.)
165.5 x 68 x 3.5 mm(6.52 x 2.68 x 0.14 in.)
235 x 68 x 3.5 mm(9.25 x 2.68 x 0.14 in.)
Recommended hardware forinstalling components M4 (#8) M4 (#8) M4 (#8)
Approx. Ship Weight 22.4 g (0.05 lb) 32.0 g (0.07 lb) 45.9 g (0.10 lb)
598-PM53 1 598-PM73 1 598-PM93 1
Outside Dimension(H x W x Thickness)
116 x 68 x 1.6 mm(4.57 x 2.68 x 0.06 in.)
165.5 x 68 x 1.6 mm(6.52 x 2.68 x 0.06 in.)
235 x 68 x 1.6 mm(9.25 x 2.68 x 0.06 in.)
Approx. Ship Weight 85.8 g (0.19 lb) 124.8 g (0.28 lb) 181 g (0.40 lb)
Note: In applications where there is shock and vibration, use of metal mounting plate is recommended.
Metal Mounting PlateCat. No. Pkg.
QuantityCat. No. Pkg.
QuantityCat. No. Pkg.
Quantity
Plastic Mounting Plate Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
Dimensions are not intended to be used for manufacturing purposes.
Bulletin 598
Definite-Purpose Style Enclosures
5Visit our website: www.ab.com/catalogs
Product Selection, Continued
Cat. No. 598-BS885 Cat. No. 598-BS1187 Cat. No. 598-BS11115Cat. No. 598-DS885M Cat. No. 598-DS11115M
EnclosureCat. No.
Pkg.Quantity Cat. No.
Pkg.Quantity Cat. No.
Pkg.Quantity
Lift-Off Solid Cover 598-BS885
1
598-BS1187
1
598-BS11115
1Lift-Off Clear Cover 598-BS885C 598-BS1187C 598-BS11115C
Hinged Solid Cover 598-DS885M 598-DS1187M 598-DS11115M
Hinged Clear Cover 598-DS885CM 598-DS1187CM 598-DS11115CM
Outside Dimensions(H x W x D)
190 x 190 x 130 mm(7.48 x 7.48 x 5.12 in.)
280 x 190 x 130 mm(11.02 x 7.48 x 5.12 in.)
280 x 280 x 130 mm(11.02 x 11.02 x 5.12 in.)
Base Depth 98 mm (3.86 in.) 98 mm (3.86 in.) 98 mm (3.86 in.)
Cover Depth 30 mm (1.18 in.) 80 mm (3.15 in.) 30 mm (1.18 in.)
Cover Screw Material Glass-Reinforced Nylon Glass-Reinforced Nylon Glass-Reinforced Nylon
Cover Plug Material(for hinged enclosures only) Polypropylene Polypropylene Polypropylene
Recommended TighteningTorque 1.2…1.7 N•m (11…15 lb-in.) 1.2…1.7 N•m (11…15 lb-in.) 1.2…1.7 N•m (11…15 lb-in.)
Approx. Ship Weight 801.6 g (1.77 lb) 1261 g (2.78 lb) 1308 g (2.88 lb)
Plastic Mounting Plate Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
598-PP88 1 598-PP118 1 598-PP1111 1
Outside Dimension(H x W x Thickness)
160 x 160 x 4 mm(6.3 x 6.3 x 0.16 in.)
252 x 161 x 3.4 mm(9.92 x 6.34 x 0.13 in.)
267 x 267 x 3.4 mm(10.51 x 10.51 x 0.13 in.)
Thickness atsupport bracket
12 mm(0.47 in.)
12 mm(0.47 in.)
12 mm(0.47 in.)
Recommended hardware forinstalling components M4 (#8) M4 (#8) M4 (#8)
Approx. Ship Weight 98.5 g (0.22 lb) 124.4 g (0.27 lb) 206.4 g (0.46 lb)
Metal Mounting Plate Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
598-PM88 1 598-PM118 1 598-PM1111 1
Outside Dimension(H x W x Thickness)
161 x 161 x 1.6 mm(6.34 x 6.34 x 0.06 in.)
251.5 x 161 x 1.6 mm(9.9 x 6.34 x 0.06 in.)
251 x 251 x 1.6 mm(9.88 x 9.88 x 0.06 in.)
Approx. Ship Weight 319.3 g (0.70 lb) 500.9 g (1.10 lb) 748.5 g (1.65 lb)
Stainless Steel ExternalMounting Bracket
(including mountinghardware)
Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
598-N13 4 598-N13 4 598-N13 4
Approx. Ship Weight 92.5 g (0.20 lb) 92.5 g (0.20 lb) 92.5 g (0.20 lb)
Stainless SteelHinge & Latch Kit
Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
598-NHL22M 1 598-NHL22M 1 598-NHL22M 1
Number of Kits to ConvertLift-Off to Hinged 1 1 1
Approx. Ship Weight 165 g (0.36 lb) 165 g (0.36 lb) 165 g (0.36 lb)
Note: In applications where there is shock and vibration, use of metal mounting plate is recommended.Clear cover material: polycarbonate. Dimensions are not intended to be used for manufacturing purposes.
Bulletin 598
Definite-Purpose Style Enclosures
6 Visit our website: www.ab.com/catalogs
Product Selection, Continued
Cat. No. 598-BS13115 Cat. No. 598-BS1587 Cat. No. 598-BS15117Cat. No. 598-DS13115CM Cat. No. 598-DS15117CM
EnclosureCat. No.
Pkg.Quantity Cat. No.
Pkg.Quantity Cat. No.
Pkg.Quantity
Lift-Off Solid Cover 598-BS13115
1
598-BS1587
1
598-BS15117
1Lift-Off Clear Cover 598-BS13115C 598-BS1587C 598-BS15117C
Hinged Solid Cover 598-DS13115M 598-DS1587M 598-DS15117M
Hinged Clear Cover 598-DS13115CM 598-DS1587CM 598-DS15117CM
Outside Dimensions(H x W x D)
341x 280 x 130 mm(13.43 x 11.02 x 5.12 in.)
382 x 192 x 180 mm(15.04 x 7.56 x 7.09 in.)
380 x 280 x 180 mm(14.96 x 11.02 x 7.09 in.)
Base Depth 100 mm (3.94 in.) 98 mm (3.86 in.) 98 mm (3.86 in.)
Cover Depth 30 mm (1.18 in.) 80 mm (3.15 in.) 80 mm (3.15 in.)
Cover Screw Material Glass-Reinforced Nylon Glass-Reinforced Nylon Glass-Reinforced Nylon
Cover Plug Material(for hinged enclosures only) Polypropylene Polypropylene Polypropylene
Recommended TighteningTorque 1.2…1.7 N•m (11…15 lb-in.) 1.2…1.7 N•m (11…15 lb-in.) 1.2…1.7 N•m (11…15 lb-in.)
Approx. Ship Weight 1643 g (3.62 lb) 1685 g (3.71 lb) 2069 g (4.56 lb)
Plastic Mounting Plate Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
598-PP1311 1 598-PP158 1 598-PP1511 1
Outside Dimension(H x W x Thickness)
300 x 240 x 4 mm(11.81 x 9.45 x 0.16 in.)
335 x 155 x 4 mm(13.19 x 6.10 x 0.16 in.)
351 x 251x 4.3 mm(13.82 x 9.88 x 0.17 in.)
Thickness atsupport bracket
12 mm(0.47 in.)
12 mm(0.47 in.)
12 mm(0.47 in.)
Recommended hardware forinstalling components M4 (#8) M4 (#8) M4 (#8)
Approx. Ship Weight 268.8 g (0.59 lb) 194.2 g (0.43 lb) 333.1 g (0.73 lb)
Metal Mounting Plate Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
598-PM1311 1 598-PM158 1 598-PM1511 1
Outside Dimension(H x W x Thickness)
312 x 251 x 1.6 mm(12.28 x 9.88 x 0.06 in.)
352.5 x 161 x 1.6 mm(13.88 x 6.34 x 0.06 in.)
351 x 251 x 1.6 mm(13.82 x 9.88 x 0.06 in.)
Approx. Ship Weight 955.5 g (2.11 lb) 710.1 g (1.57 lb) 1089.8 g (2.40 lb)
Stainless Steel ExternalMounting Bracket
(including mountinghardware)
Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
598-N13 4 598-N13 4 598-N13 4
Approx. Ship Weight 92.5 g (0.20 lb) 92.5 g (0.20 lb) 92.5 g (0.20 lb)
Stainless SteelHinge & Latch Kit
Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
598-NHL22M 1 598-NHL22M 1 598-NHL22M 1
Number of Kits to ConvertLift-Off to Hinged 1 1 1
Approx. Ship Weight 165 g (0.36 lb) 165 g (0.36 lb) 165 g (0.36 lb)
Note: In applications where there is shock and vibration, use of metal mounting plate is recommended.Clear cover material: polycarbonate. Dimensions are not intended to be used for manufacturing purposes.
Bulletin 598
Definite-Purpose Style Enclosures
7Visit our website: www.ab.com/catalogs
Product Selection, Continued
Cat. No. 598-BS22115 Cat. No. 598-BS22157 Cat. No. 598-DS22157CM
Enclosure Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
Lift-Off Solid Cover 598-BS22115
1
598-BS22157
1Lift-Off Clear Cover 598-BS22115C 598-BS22157C
Hinged Solid Cover 598-DS22115M 598-DS22157M
Hinged Clear Cover 598-DS22115CM 598-DS22157CM
Outside Dimensions‡(H x W x D)
560 mm x 280 mm x 130 mm(22.05 in. x 11.02 in. x 5.12 in.)
560 mm x 380 mm x 180 mm(22.05 in. x 14.96 in. x 7.09 in.)
Base Depth 98 mm (3.86 in.) 148 mm (5.83 in.)
Cover Depth 30 mm (1.18 in.) 80 mm (3.15 in.)
Cover Screw Material Glass-Reinforced Nylon Glass-Reinforced Nylon
Cover Plug Material(for hinged enclosures only) Polypropylene Polypropylene
Recommended Tightening Torque 1.2…1.7 N•m (11…15 lb-in.) 1.2…1.7 N•m (11…15 lb-in.)
Approx. Ship Weight 2622 g (5.78 lb) 4327 g (9.54 lb)
Plastic Mounting Plate Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
— — 598-PP1511 1
Outside Dimension‡(H x W x Thickness) — 351 x 251x 4.3 mm
(13.82 x 9.88 x 0.17 in.)
Thickness atsupport bracket — 12 mm
(0.47 in.)
Recommended hardware forinstalling components — M4 (#8)
Approx. Ship Weight — 333.1 g (0.73 lb)
Metal Mounting Plate Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
598-PM2211 1 598-PM2215 1
Outside Dimension‡(H x W x Thickness)
532 mm x 254.5 mm x 1.6 mm(20.94 in. x 10.02 in. x 0.06 in.)
532 mm x 354.5 mm x 1.6 mm(20.94 in. x 13.6 in. x 0.06 in.)
Approx. Ship Weight 1712 g (3.77 lb) 2332 g (5.14 lb)
Stainless Steel External Mounting Bracket(including mounting hardware)
Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
598-N13 4 598-N13 4
Approx. Shipping Weight 92.5 g (0.20 lb) 92.5 g (0.20 lb)
Stainless SteelHinge & Latch Kit
Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
598-NHL22M 1 598-NHL22M 1
Number of Kits to ConvertLift-Off to Hinged 2 2
Approx. Ship Weight 165 g (0.36 lb) 165 g (0.36 lb)
Clear cover material: polycarbonate. Must order two pieces for this enclosure.‡ Dimensions are not intended to be used for manufacturing purposes.
Bulletin 598
Definite-Purpose Style Enclosures
8 Visit our website: www.ab.com/catalogs
Overview/Specifications
Bulletin 598 — Junction Box
Standards andCertifications
Technical Specifications
Type 3R, 4, 4X, 12, and 13 rainproof, watertight, corrosion resistant,and dusttight, IP66 protectionDesigned for use as junction box, terminal wiring box, and smallautomation control box in industrial and commercial applicationsAvailable with optional plastic or metal mounting platesProvision for mounting using either AB or DIN RailEnclosure can accommodate panel mount or rail mount terminalblocksDesigned for use in both indoor and outdoor applications
Product Certification
Approvals/Certifications cULus, CE
Degree of Protection Type 3R, 4, 4X, 12, and 13, IP66
Environmental
Storage Temperature Range -40…75°C (-40…158°F)
Operating Temperature Range -40…55°C (-40…131°F)
Material
Enclosure Thermoplastic Polyester blend, UL94 5VA
Gasket Foam-in-place polyurethane
Plastic Mounting Plate ABS
Metal Mounting Plate Steel plus zinc with chromate plating
Mounting Plate Hardware(included with enclosure) Stainless Steel
Mounting Provision Brass
External Mounting Bracket Stainless Steel
Note: In applications where there is shock and vibration, use of metal mounting plate isrecommended.
cULusCEUL 508CSA C22.2 No. 14
Table of Contents
Product Selection ...... 9Terminal BlockCompatibility................ 11Dimensions................... 19
Bulletin 598
Definite-Purpose Style Enclosures
9Visit our website: www.ab.com/catalogs
Product Selection
Cat. No. 598-BS332 Cat. No. 598-BS632 Cat. No. 598-BS533
Enclosure
Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
598-BS332 1 598-BS632 1 598-BS533 1
Outside Dimensions(H x W x D)
90 x 70 x 51.5 mm(3.54 x 2.76 x 2.03 in.)
165 x 85 x 51.5 mm(6.5 x 3.35 x 2.03 in.)
130 x 80 x 85 mm(5.12 x 3.15 x 3.35 in.)
Base Depth 45 mm (1.77 in.) 45 mm (1.77 in.) 50 mm (1.97 in.)
Cover Depth 6.5 mm (0.26 in.) 6.5 mm (0.26 in.) 35 mm (1.38 in.)
Cover Screw Material Stainless Steel Stainless Steel Glass-Reinforced Nylon
Recommended TighteningTorque 0.8…1.0 N•m (7…9 lb-in.) 0.8…1.0 N•m (7…9 lb-in.) 1.0…1.2 N•m (9…11 lb-in.)
Approx. Ship Weight 103 g (0.23 lb) 189 g (0.42 lb) 271 g (0.60 lb)
Height
Width
Molded-In Molded-In 598-PP53 1
Outside Dimension(H x W x Thickness)
64.5 mm x 51.5 mm x 4.9 mm(2.54 in. x 2.03 in. x 0.19 in.)
139.5 mm x 62.5 mm x 4.9 mm(5.49 in. x 2.46 in. x 0.19 in.)
116 x 68 x 3.5 mm(4.57 x 2.68 x 0.14 in.)
Recommended hardware forinstalling components M4 (#8) M4 (#8) M4 (#8)
Approx. Ship Weight — — 22.4 g (0.05 lb)
Not Available Not Available
— — 598-PM53 1
Outside Dimension(H x W x Thickness) — — 116 x 68 x 1.6 mm
(4.57 x 2.68 x 0.06 in.)
Approx. Ship Weight — — 85.8 g (0.19 lb)
Note: In applications where there is shock and vibration, use of metal mounting plate is recommended.
Plastic Mounting Plate
Cat. No.Pkg.
Quantity
Metal Mounting Plate
Not Available Not Available Cat. No.Pkg.
Quantity
Dimensions are not intended to be used for manufacturing purposes.
Bulletin 598
Definite-Purpose Style Enclosures
10 Visit our website: www.ab.com/catalogs
Product Selection, Continued
Cat. No. 598-BS733 Cat. No. 598-BS933 Cat. No. 598-BS885
Enclosure
Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
598-BS733 1 598-BS933 1 598-BS885 1
Outside Dimensions(H x W x D)
180 x 80 x 85 mm(7.09 x 3.15 x 3.35 in.)
250 x 80 x 85 mm(9.84 x 3.15 x 3.35 in.)
190 x 190 x 130 mm(7.48 x 7.48 x 5.12 in.)
Base Depth 50 mm (1.97 in.) 50 mm (1.97 in.) 50 mm (1.97 in.)
Cover Depth 35 mm (1.38 in.) 35 mm (1.38 in.) 35 mm (1.38 in.)
Cover Screw Material Glass-Reinforced Nylon Glass-Reinforced Nylon Glass-Reinforced Nylon
Recommended TighteningTorque 1.0…1.2 N•m (9…11 lb-in.) 1.0…1.2 N•m (9…11 lb-in.) 1.0…1.2 N•m (9…11 lb-in.)
Approx. Ship Weight 357 g (0.79 lb) 435 g (0.96 lb) 801.6 g (1.77 lb)
598-PP73 1 598-PP93 1 598-PP88 1
Outside Dimension(H x W x Thickness)
165.5 x 68 x 3.5 mm(6.52 x 2.68 x 0.14 in.)
235 x 68 x 3.5 mm(9.25 x 2.68 x 0.14 in.)
160 x 160 x 4 mm(6.3 x 6.3 x 0.16 in.)
Recommended hardware forinstalling components M4 (#8) M4 (#8) M4 (#8)
Approx. Ship Weight 32.0 g (0.07 lb) 45.9 g (0.10 lb) 98.5 g (0.22 lb)
598-PM73 1 598-PM93 1 598-PM88 1
Outside Dimension(H x W x Thickness)
165.5 x 68 x 1.6 mm(6.52 x 2.68 x 0.06 in.)
235 x 68 x 1.6 mm(9.25 x 2.68 x 0.06 in.)
161 x 161 x 1.6 mm(6.34 x 6.34 x 0.06 in.)
Approx. Ship Weight 124.8 g (0.28 lb) 181 g (0.40 lb) 319.3 g (0.70 lb)
Note: In applications where there is shock and vibration, use of metal mounting plate is recommended.Dimensions are not intended to be used for manufacturing purposes.
Plastic Mounting Plate
Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
Metal Mounting Plate
Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
For Cat. No. 598-BS885 clear & hinged covers, see page 5.
Bulletin 598
Definite-Purpose Style Enclosures
11Visit our website: www.ab.com/catalogs
Terminal Block Compatibility
Note: Table lists suggested types of terminal blocks suitable for mounting on plastic grid in junction box.Items in table are not pre-assembled and are sold separately.
Junction Box
598-BS332 598-BS632 598-BS533 598-BS733 598-BS933 598-BS885
MountingOptions for use
with PanelMount Terminal
Blocks
Molded-In Molded-In 598-PP53 598-PP73 598-PP93 598-PP88
Types of Terminal Blocks Suitablefor Mounting on Plastic Grid in
Junction BoxMaximum Number of Poles
(Approximation)
Panel MountBlocks with
predefined set ofpoles
2 8 4 8 12 12
Barrier Strips
— — 5 5 5 5
1492-EC85 &1492-ED103
— — 6 6 6 6
1492-HC6
— 12 6 12 12 12
1492-HJ86 &1492-HJ812
Panel MountInterlocking
Blocks
2 6 4 7 12 7
1492-15T &1492-25T — 5 3 5 8 6
Rail MountTerminal Blocks
1492-C… — — 7 12 18 14
1492-F… — — 7 12 18 14
1492-H… — — 14 24 36 28
1492-W… — — 14 24 36 28
1492-J… — — 14 24 36 28
1492-L… — — 14 24 36 28
Requires AB or DIN Rail for mountingFor barrier strip with typical 0.563 in. pitch spacings.
Bulletin 598
Definite-Purpose Style Enclosures
12 Visit our website: www.ab.com/catalogs
Overview/Specifications
Bulletin 598 — 22.5 mm Push Button Enclosure
Standards andCertifications
Technical Specifications
Table of Contents
Product Selection ...... 13Legend Plate/Contact BlockCompatibility................ 16Dimensions................... 20… 21
Product Certification
Approvals/Certifications cULus, CE
Degree of Protection Type 4, 4X, 12, and 13, IP66
Environmental
Storage Temperature Range -40…75°C (-40…158°F)
Operating Temperature Range -40…55°C (-40…131°F)
Material
Enclosure Thermoplastic polyester blend, UL94 5VA
Gasket Foam-in-place polyurethane
Pre-molded 22.5 mm mounting holeAvailable in two colors:− Gray enclosures: Type 4, 4X, 12, and 13 watertight, corrosion
resistant, and dusttight, IP66 protection− Yellow enclosures: Type 4, 4X, 12, and 13 watertight, corrosion
resistant, and dusttight, IP66 protectionAvailable in these configurations:− 1-hole− 2-hole− 3-hole− 4-hole
Designed for both indoor and outdoor applications
cULusCEUL 508CSA C22.2 No. 14
Bulletin 598
Definite-Purpose Style Enclosures
13Visit our website: www.ab.com/catalogs
Product Selection
Note: For information on legend plates and contact blocks, see Legend Plate & Contact Block Compatibility/Options on page 16.
Cat. No. 598-1PB22__ Cat. No. 598-2PB22__
Cat. No. 598-3PB22__ Cat. No. 598-4PB22__
Enclosure Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
Gray Enclosure 598-3PB22G1
598-4PB22G1
Yellow Enclosure 598-3PB22Y 598-4PB22Y
Outside Dimensions(H x W x D)
180 mm x 80 mm x 85 mm(7.09 in. x 3.15 in. x 3.35 in.)
250 mm x 80 mm x 85 mm(9.84 in. x 3.15 in. x 3.35 in.)
Base Depth 50 mm (1.97 in.) 50 mm (1.97 in.)
Cover Depth 35 mm (1.38 in.) 35 mm (1.38 in.)
Cover Screw Material Glass-Reinforced Nylon Glass-Reinforced Nylon
Recommended Tightening Torque 1.0…1.2 N•m (9…11 lb-in.) 1.0…1.2 N•m (9…11 lb-in.)
Approx. Ship Weight 357 g (0.79 lb) 435 g (0.96 lb)
Note: Holes are pre-molded to fit 22.5 mm push buttons, such as the Allen-Bradley Bulletin 800F line.Dimensions are not intended to be used for manufacturing purposes.
Enclosure Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
Gray Enclosure 598-1PB22G1
598-2PB22G1
Yellow Enclosure 598-1PB22Y 598-2PB22Y
Outside Dimensions(H x W x D)
110 mm x 80 mm x 85 mm(4.33 in. x 3.15 in. x 3.35 in.)
130 mm x 80 mm x 85 mm(5.12 in. x 3.15 in. x 3.35 in.)
Base Depth 50 mm (1.97 in.) 50 mm (1.97 in.)
Cover Depth 35 mm (1.38 in.) 35 mm (1.38 in.)
Cover Screw Material Glass-Reinforced Nylon Glass-Reinforced Nylon
Recommended Tightening Torque 1.0…1.2 N•m (9…11 lb-in.) 1.0…1.2 N•m (9…11 lb-in.)
Approx. Ship Weight 232 g (0.51 lb) 271 g (0.60 lb)
Bulletin 800H
Definite-Purpose Style Enclosures
14 Visit our website: www.ab.com/catalogs
Overview/Specifications
Bulletin 800H — 30.5 mm Push Button Enclosure
Standards andCertifications
Technical Specifications
Product Certification
Approvals/Certifications cULus, CE
Degree of Protection Type 4, 4X, 12, and 13, IP66
Environmental
Storage Temperature Range -40…75°C (-40…158°F)
Operating Temperature Range -40…55°C (-40…131°F)
Material
Enclosure Thermoplastic Polyester blend, UL94 5VA
Gasket Foam-in-place polyurethane
Yellow enclosures: Type 4X indoor use only.
Table of Contents
Product Selection ...... 15Legend Plate/Contact BlockCompatibility................ 16Dimensions................... 20… 21
Pre-molded 30.5 mm mounting holeAvailable in two colors:− Gray enclosures: Type 4, 4X, 12, and 13 watertight, corrosion
resistant, and dusttight, IP66 protection− Yellow enclosures: Type 4X indoor use only, IP66 protection
Available in these configurations:− 1-hole− 2-hole− 3-hole− 4-hole
cULusCEUL 508CSA C22.2 No. 14
Bulletin 800H
Definite-Purpose Style Enclosures
15Visit our website: www.ab.com/catalogs
Product Selection
Cat. No. 800H-1HZ4__ Cat. No. 800H-2HZ4__
Cat. No. 800H-3HZ4__ Cat. No. 800H-4HZ4__
Enclosure Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
Gray Enclosure 800H-3HZ4C1
800H-4HZ4C1
Yellow Enclosure 800H-3HZ4CY 800H-4HZ4CY
Outside Dimensions(H x W x D)
180 mm x 80 mm x 85 mm(7.09 in. x 3.15 in. x 3.35 in.)
250 mm x 80 mm x 85 mm(9.84 in. x 3.15 in. x 3.35 in.)
Base Depth 50 mm (1.97 in.) 50 mm (1.97 in.)
Cover Depth 35 mm (1.38 in.) 35 mm (1.38 in.)
Cover Screw Material Glass-Reinforced Nylon Glass-Reinforced Nylon
Recommended Tightening Torque 1.0…1.2 N•m (9…11 lb-in.) 1.0…1.2 N•m (9…11 lb-in.)
Approx. Ship Weight 357 g (0.79 lb) 435 g (0.96 lb)
Note: Holes are pre-molded to fit 30.5 mm push buttons, such as the Allen-Bradley Bulletin 800T and 800H.Dimensions are not intended to be used for manufacturing purposes.
Enclosure Cat. No.Pkg.
Quantity Cat. No.Pkg.
Quantity
Gray Enclosure 800H-1HZ4C1
800H-2HZ4C1
Yellow Enclosure 800H-1HZ4CY 800H-2HZ4CY
Outside Dimensions(H x W x D)
110 mm x 80 mm x 70 mm(4.33 in. x 3.15 in. x 2.76 in.)
130 mm x 80 mm x 85 mm(5.12 in. x 3.15 in. x 3.35 in.)
Base Depth 50 mm (1.97 in.) 50 mm (1.97 in.)
Cover Depth 20 mm (0.79 in.) 35 mm (1.38 in.)
Cover Screw Material Glass-Reinforced Nylon Glass-Reinforced Nylon
Recommended Tightening Torque 1.0…1.2 N•m (9…11 lb-in.) 1.0…1.2 N•m (9…11 lb-in.)
Approx. Ship Weight 213 g (0.47 lb) 271 g (0.60 lb)
Bulletin 598/800H
Definite-Purpose Style Enclosures
16 Visit our website: www.ab.com/catalogs
Legend Plate / Contact Block Compatibility
Note: Pictures are for illustrative purposes only, depicting suitable legend plates and contact blocks that would fit in and on theBul. 598/800H push button plastic enclosure. Please reference the appropriate selection guides for more dimensional information.
Legend Plate Compatibility/Options
22.5 mm Push Button Enclosure 30.5 mm Push Button Enclosure
22.5 mm Push Button Enclosure 30.5 mm Push Button Enclosure
Contact Block Compatibility/Options
Bulletin 598
Definite-Purpose Style Enclosures
17Visit our website: www.ab.com/catalogs
Approximate Dimensions
Dimensions are shown in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.
BASE COVER
H
E
A
G
2-insert M4
KEY
TOPVIEW
D1
7.0 mm(0.275 in.)
D2
WBF
C1
C2
SIDEVIEW
BASE COVER
INSERT M5
WBFJ
D1
D2
H
10.5mm(0.41 in.)
A
E
G
C1
C2
TOPVIEW
SIDEVIEW
Cat. No.
Overall Dimension Inside DimensionEnclosure Mounting
Dimension
MountingPlate
MountingDim.
H W D1 D2 A B C1 C2 E F G
598-BS533 130(5.12)
80(3.15)
50(1.97)
35(1.38)
120(4.72)
70(2.76)
46.5(1.83)
31.5(1.24)
112(4.41)
62(2.44)
100(3.94)
598-BS733 180(7.09)
80(3.15)
50(1.97)
35(1.38)
170(6.69)
70(2.76)
46.5(1.83)
31.5(1.24)
162(6.38)
62(2.44)
150(5.91)
598-BS933 250(9.84)
80(3.15)
50(1.97)
35(1.38)
240(9.45)
70(2.76)
46.5(1.83)
31.5(1.24)
232(9.13)
62(2.44)
220(8.66)
General Purpose Enclosures
Cat. No.
Overall Dimension Inside DimensionEnclosure Mounting
DimensionMounting PlateMounting Dim.
H W D1 D2 A B C1 C2 E F G J
598-BS885__ 190(7.48)
190(7.48)
98(3.86)
30(1.18)
174(6.85)
174(6.85)
94(3.70)
26(1.02)
165(6.50)
165(6.50)
120(4.72)
120(4.72)598-DS885__
598-BS1187__ 280(11.02)
190(7.48)
98(3.86)
80(3.15)
266(10.47)
170(6.69)
94(3.70)
76(2.99)
255(10.04)
165(6.50)
210(8.27)
120(4.72)598-DS1187__
598-BS1587__ 382(15.04)
192(7.56)
98(3.86)
80(3.15)
366(14.41)
172(6.77)
94(3.70)
76(2.99)
355(13.98)
165(6.50)
310(12.20)
120(4.72)598-DS1587__
598-BS11115__ 280(11.02)
280(11.02)
98(3.86)
30(1.18)
260(10.24)
260(10.24)
94(3.70)
26(1.02)
255(10.04)
255(10.04)
210(8.27)
210(8.27)598-DS11115__
598-BS13115__ 341(13.43)
280(11.02)
100(3.94)
30(1.18)
320(12.60)
260(10.24)
96(3.78)
26(1.02)
316(12.44)
256(10.08)
270(10.63)
210(8.27)598-DS13115__
598-BS15117__ 380(14.96)
280(11.02)
98(3.86)
80(3.15)
359(14.13)
259(10.20)
94(3.70)
76(2.99)
355(13.98)
255(10.04)
310(12.20)
210(8.27)598-DS15117__
598-BS22115__ 560(22.05)
280(11.02)
98(3.86)
30(1.18)
540(21.26)
260(10.24)
94(3.70)
26(1.02)
535(21.06)
255(10.04)
490(19.29)
220(8.66)598-DS22115__
598-BS22157__ 560(22.05)
380(14.96)
148(5.83)
30(1.18)
540(21.26)
360(14.17)
144(5.67)
26(1.02)
535(21.06)
355(13.98)
490(19.29)
311(12.24)598-DS22157__
Bulletin 598
Definite-Purpose Style Enclosures
18 Visit our website: www.ab.com/catalogs
Approximate Dimensions, Continued
Mounting Bracket
10.0
mm
(.40
in)
7.0mm(.28 in)
57.0mm(2.25 in)
16.0mm(.63 in)
25.2
mm
(.98
in)
Ø24mm(.94 in)
Ø6.83mm(.27 in)
Ø15.95mm(.63 in)
4.0mm(.16 in)
5.7mm(.22 in)
3.0mm(.12 in)
Fig. 1 – Base (Bottom View) Fig. 2 – Base (Bottom View)
X
Y
Threaded brass insertM5 x 0.8 mm(4) places
X
Y
Threaded brass insertM5 x 0.8 mm(4) places
Fig. 3 – Base (Bottom View) Fig. 4 – Base (Bottom View)
X
Y
Threaded brass insertM5 x 0.8 mm(4) places
U
V
X
Y
Threaded brass insertM5 x 0.8 mm(4) places
U
V
General Purpose External Mounting Dimensionsfor use with External Mounting Bracket
Dimensions are shown in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.
Cat. No. Figure No. U V X Y
598-BS885__ 598-DS885__ 1 — — 156 (6.13) 98 (3.88)
598-BS1187__ 598-DS1187__
2
— — 251 (9.88) 152 (6.00)
598-BS11115__ 598-DS11115__ — — 238 (9.38) 238 (9.38)
598-BS13115__ 598-DS13115__ — — 295 (11.63) 235 (9.25)
598-BS1587__ 598-DS1587__ — — 349 (13.78) 152 (6.00)
598-BS15117__ 598-DS15117__ — — 340 (13.38) 241 (9.50)
598-BS22115__ 598-DS22115__ 3 329 (12.94) 148 (5.81) 519 (20.44) 267 (10.50)
598-BS22157__ 598-DS22157__ 4 292 (11.50) 195 (7.69) 519 (20.44) 340 (13.38)
Bulletin 598
Definite-Purpose Style Enclosures
19Visit our website: www.ab.com/catalogs
Approximate Dimensions, Continued
Dimensions are shown in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.
BASE COVER
D1D2
A
H
E
TOPVIEW
WBF
C1
C2
SIDEVIEW
BASE COVER
H
E
A
G
2-insert M4
KEY
TOPVIEW
D1
7.0 mm(0.275 in.)
D2
WBF
C1
C2
SIDEVIEW
BASE COVER
INSERT M5
WBFJ
D1
D2
H
10.5mm(0.41 in.)
A
E
G
C1
C2
TOPVIEW
SIDEVIEW
Junction Boxes
Cat. No.
Overall Dimension Inside DimensionEnclosure Mounting
Dimension
H W D1 D2 A B C1 C2 E F
598-BS332 90(3.54)
70(2.76)
45(1.77)
6.5(0.26)
84(3.31)
64(2.52)
42(1.79)
3.5(0.14)
78(3.07)
39(1.54)
598-BS632 165(6.50)
85(3.35)
45(1.77)
6.5(0.26)
159(6.26)
79(3.11)
42(1.79)
3.5(0.14)
153(6.02)
55(2.17)
Cat. No.
Overall Dimension Inside DimensionEnclosure Mounting
DimensionMounting PlateMounting Dim.
H W D1 D2 A B C1 C2 E F G J
598-BS885 190(7.48)
190(7.48)
98(3.86)
30(1.18)
174(6.85)
174(6.85)
94(3.70)
26(1.02)
165(6.50)
165(6.50)
120(4.72)
120(4.72)
Cat. No.
Overall Dimension Inside DimensionEnclosure Mounting
Dimension
MountingPlate
MountingDim.
H W D1 D2 A B C1 C2 E F G
598-BS533 130(5.12)
80(3.15)
50(1.97)
35(1.38)
120(4.72)
70(2.76)
46.5(1.83)
31.5(1.24)
112(4.41)
62(2.44)
100(3.94)
598-BS733 180(7.09)
80(3.15)
50(1.97)
35(1.38)
170(6.69)
70(2.76)
46.5(1.83)
31.5(1.24)
162(6.38)
62(2.44)
150(5.91)
598-BS933 250(9.84)
80(3.15)
50(1.97)
35(1.38)
240(9.45)
70(2.76)
46.5(1.83)
31.5(1.24)
232(9.13)
62(2.44)
220(8.66)
Bulletin 598/800H
Definite-Purpose Style Enclosures
20 Visit our website: www.ab.com/catalogs
Approximate Dimensions
Dimensions are shown in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.
Push Button Enclosures
BASE COVER
H
E
A
G
2-insert M4
KEY
TOPVIEW
D1
7.0 mm(0.275 in.)
D2
WBF
C1
C2
SIDEVIEW
Cat. No.
Overall Dimension Inside DimensionEnclosure Mounting
Dimension
MountingPlate
MountingDim.
H W D1 D2 A B C1 C2 E F G
22.5 mm Push Button Enclosures
598-1PB22__ 110(4.33)
80(3.15)
50(1.97)
35(1.38)
104(4.09)
74(2.91)
46.5(1.83)
31.5(1.24)
92(3.62)
62(2.44)
80(3.15)
598-2PB22__ 130(5.12)
80(3.15)
50(1.97)
35(1.38)
120(4.72)
70(2.76)
46.5(1.83)
31.5(1.24)
112(4.41)
62(2.44)
100(3.94)
598-3PB22__ 180(7.09)
80(3.15)
50(1.97)
35(1.38)
170(6.69)
70(2.76)
46.5(1.83)
31.5(1.24)
162(6.38)
62(2.44)
150(5.91)
598-4PB22__ 250(9.84)
80(3.15)
50(1.97)
35(1.38)
240(9.45)
70(2.76)
46.5(1.83)
31.5(1.24)
232(9.13)
62(2.44)
220(8.66)
30.5 mm Push Button Enclosures
800H-1HZ4__ 110(4.33)
80(3.15)
50(1.97)
20(0.79)
104(4.09)
74(2.91)
46.5(1.83)
16.5(0.65)
92(3.62)
62(2.44)
80(3.15)
800H-2HZ4__ 130(5.12)
80(3.15)
50(1.97)
35(1.38)
120(4.72)
70(2.76)
46.5(1.83)
31.5(1.24)
112(4.41)
62(2.44)
100(3.94)
800H-3HZ4__ 180(7.09)
80(3.15)
50(1.97)
35(1.38)
170(6.69)
70(2.76)
46.5(1.83)
31.5(1.24)
162(6.38)
62(2.44)
150(5.91)
800H-4HZ4__ 250(9.84)
80(3.15)
50(1.97)
35(1.38)
240(9.45)
70(2.76)
46.5(1.83)
31.5(1.24)
232(9.13)
62(2.44)
220(8.66)
Bulletin 598/800H
Definite-Purpose Style Enclosures
21Visit our website: www.ab.com/catalogs
Approximate Dimensions, Continued
Dimensions are shown in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.
Push Button Hole
22.5 mm Push Button Hole 30.5 mm Push Button Hole
Push Button Hole Spacing
Cat. No. Type A B C D E F
22.5 mm Push Button Enclosure
598-1PB22__ 1-Hole 55±0.216(2.165±0.0085)
40±0.5(1.57±0.020)
—
50.0±0.191(1.968±0.0075)
— —
598-2PB22__ 2-Hole — 40±0.175(1.57±0.0069) — —
598-3PB22__ 3-Hole — —40 +0.32/-0.18(1.57 +0.0126/-
0.0071)—
598-4PB22__ 4-Hole — — — 50±0.216(1.968±0.0085)
30.5 mm Push Button Enclosure
800H-1HZ4__ 1-Hole 55±.216(2.165±0.0085)
40±0.5(1.57±0.020)
—
46.8±0.191(1.843±0.0075)
— —
800H-2HZ4__ 2-Hole — 41.6±0.175(1.64±0.0069) — —
800H-3HZ4__ 3-Hole — —43.2 +0.32/-0.18
(1.7 +0.0126/-0.0071)
—
800H-4HZ4__ 4-Hole — — — 54.8±0.216(2.16±0.0085)
Bulletin 598/800H
Definite-Purpose Style Enclosures
22 Visit our website: www.ab.com/catalogs
Notes
UNIQUE PLASTIC MOUNTING PLATE■ Plastic mounting plate with pegboard design
■ Allows quick installation of components
without drilling
■ Reduces installation time and cost
HINGE AND LATCH ACCESSORY KITThe Cat. No. 598-NHL22M stainless steel
hinged and latch accessory kit is suitable for
converting both solid and clear lift-off screw
cover enclosures to hinged enclosures. Each
kit consists of hinges, latches, gaskets, screws,
plugs, and associated hardware.
FEATURES■ Corrosion-resistant stainless steel material
■ Added security
- Anti-tamper screws
- Press-to-release latch
■ Ease of assembly (no template is required) –
hinged and latch positions are embossed onto
the enclosure
■ Each enclosure only requires one kit for
conversion except for the two largest size
enclosures (Cat. Nos. 598-BS22115__ and
598-BS22157__), which require two kits.
Anti-tamper screws
Press-to-release latchfor added security
Embossed markson enclosure forease of assembly
BULLETIN 598ACCESSORIES
OTHER AVAILABLE ACCESSORIES• Stainless steel mounting bracket for
easy installation
• Metal mounting plate or unique
pegboard plastic mounting plate
Publication 598-SG003A-EN-P – April 2007 Copyright ©2007 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.Supercedes Publication 598-SG001B-EN-P – November 2005 & 598-SG002B-EN-P – November 2005