The complete test set for qualifying your local loop for ... · The complete test set for...
Transcript of The complete test set for qualifying your local loop for ... · The complete test set for...
CopperPro™ Series II
The complete test set for qualifying your local loop for ADSL, VDSL
and special services.
N E T W O R K S U P E R V I S I O N
Demand is growing rapidly for next
generation broadband services such
as video on demand, broadband
Internet access, and VoIP. That
presents tremendous potential for
profitable new business.
But, it also puts pressure on your
technicians and outside plant (OSP)
to deliver the performance those new
services require. To be ready to take
advantage of new opportunities, your
technicians need a test set that
can help them:
• Quicklyqualifythefacilitiesfor
ADSL, VDSL, HDSL, T1, and other
special services.
• Easilyidentifyandlocate
possible problems to ensure
reliable performance.
• Installnewservicesefficiently
with fewer call-backs.
• Verifyconnectivityandnetwork
performance to ensure that next
generation services perform up
to your customers’ expectations.
In short, your technicians need
the new Fluke Networks CopperPro™
Series II copper loop tester.
CopperPro Series II provides a full range of troubleshooting, fault locating, testing and qualification capabilities. That means top performance with fewer tools to carry. Plus, its rugged construction and easy-to-use features give your technicians the vision to build, repair, install, and maintain OSP systems more efficiently with fewer repeats.
Expedite installation and maintenanceCopperProSeriesIImakesfastworkofinstallingandmaintainingservice. The one-button POTS Auto-Test quickly documents status before and after work is complete. The CopperPro also gives you a clear view of all the basic tests you need to ensure top performance, including:
• ACandDCvoltage
• Loopcurrent
• Circuitnoise
• Balanceandleakage
• CallerID/ANI
Plus, you can quickly run loss and slope tests with its automated dial-up testing, and use the built-in dial set with phone number storage. You can also verify xDSL connectivity, performance and capacity up to VDSL rates with optional xDSL golden modems
A comprehensive set of copper loop testing functionsTheCopperProSeriesIIpacksallthetest,analysis,andtroubleshootingcapabilitiesanOSPtechnicianneeds into one integrated handheld tool that gives a clear vision of your local loop, including:
Streamline trouble callsStep-by-stepinstructionsmakeCopperProSeriesII a breeze to set up. Use the unique TDR Auto-Test to:
• Zeroinonfaultssuchasshortbridgetapsand shorted or open pairs.
• Countandlocateloadcoils.
• Locatehighresistancefaultsprecisely,nomatter the cable makeup.
• Easilyidentifythesourceofbroadband interference and impulse noise, up to VDSL bandwidth.
• DCVandACVmeasurement(snapshotandcontinuous)
• Shorts,grounds,andloopresistancewith
distance conversion
• Resistivefaultlocation(WheatstoneandK-Test)
• Loadcoilcounterwithestimateddistancetofaultand
impedance versus frequency graph to distinguish real
results from false positives
• MultimodeTDRwithAuto-Test:pair1test,comparepair
1 and 2, difference between pair 1 and 2, pair 1 monitor,
pair 2 to pair 1 crosstalk, compare pair 1 to stored trace
• Broadbandnoiseandlevelspectralanalysiswith
interference masks (VDSL bandwidth)
• Broadbandlossimpulsenoisereduction(VDSLbandwidth)
• ADSL,ADSL2+,VDSL2andXDSLAuto-Testforpair
qualification(variesbymodel)
• OptionalADSL1/2/2+Modem(ATU-R)
• OptionalVDSLModem(ATU-RandATU-C)
• Broadbandterminatedtestmacros
(Terminator,SmartStrap,MyHelper,FED)
• Leakagestresstestto200V
• Loopdevicecounter
• Tracingtonewithfourmodes
• Voicefrequencynoise–metallicandpowerinfluence
• Voicefrequencyloss
• Voicefrequencylongitudinalbalance
• Voicefrequencytonegenerator
• AutomatedPOTSAuto-Test
• Dialsetandnon-intrusivelinemonitor
• Voicefrequencyterminatedanddial-uptestmacros
(SmartStrap,MyHelper,FED,SASS,DATU,SmartPro)
Make CopperPro™ Series II standard equipment
Advanced features to support next generation servicesTheCopperProSeriesIIoffers several new features focused specificallyonhelpingyouinstalland maintain next generation services. These include:
• Bandwidthto18MHztosupportADSL2+andVDSLtechnologies
• Identificationofbroadbandnoise for VDSL, including crosstalk and impulse noise
• AdvancedTDRcapabilitiesforlocating short bridge taps and other hard-to-detect impair-ments to DSL performance
• GoldenmodemoptionsforADSL,ADSL2+,andVDSL
Seamlessly integrate field testing with backoffice systemsNotonlydoestheCopperProSeriesIIcollectandstorecomprehensivetestdata,italsointegrateswithNetDSLplantconditioningand EXPTechnicianProductivitysolutionstoautomatejobcloseoutand databaseupdates.ByintegratingwiththeNetDSLprocess,the CopperProSeriesIIeliminatesduplicatetasksandpaperworkand requires no additional servers, systems, or interfaces. AspartoftheFlukeNetworksEXPproductivitysolution,theCopperProSeriesIIdramaticallyimprovestechnicianefficiencywhilesignificantlyreducing repeats. Automated close-out tests assure consistent, complete testing and centralized test results make it easy to track results and monitor technical productivity.
Multiple tools in one deviceBuildingonthepopularityoftheoriginalCopperPro,theSeriesIIisacomplete solution for testing, troubleshooting, and qualifying OSP copper cablesandnetworkservices.TheCopperProSeriesIIiseasytouseandintegrates multiple test tools into a single device that provides all the functions your technicians need, including:
• Metallictesting,includingvoltage,resistance,balance,andnoise
• Faultlocatingusingthreeterminalopens,RFL,orTDR
• Advancedbroadbandtroubleshootingandqualificationfornext generationservices,includingADSL2+andVDSL
• Identifyingvoiceandbroadbandnoiseandinterference
• Collectingandreportingcomprehensiveresults
• Integrationwithbackofficesystemstoupdateloopdatabases and maintain test results
Quickly identify and locate a wide range of faults, including short bridge taps and other impairments that other sets have trouble finding.
CopperPro Series II now has the bandwidth to test and troubleshoot the latest broadband technologies.
Golden modem options permit verification of ADSL1/2/2+ and VDSL connectivity and performance.
for all your techniciansMake CopperPro™ Series II standard equipment
Integratestoday’stopOSPtestingandtroubleshooting tasks into one tool;
less to buy, maintain and train on
Builttoughforruggedfielduseandlowcost of ownership: sealed to
resist moisture, drop tested 1 meter
ADSL,ADSL2/2+,VDSL2GoldenModemmodules support a broad range of vendor
chip sets and can be updated viasoftwareinthefield
State-of-the-artTDRcanfindbridgetaps asshortas20feet(7meters),
evenwithCPEattached
Large graphic interface is fast and easytoread–whetheryourfrontlinetechis up a telephone pole or down a manhole
Serial interface for downloading software and uploading or printing reports
quickly and easily
Configurableone-buttonauto-test “toolboxes” support techs of all skill levels
for higher productivity and consistency
Single test modes support the needs of more expert technicians
On-line help
Powerorchargefrommains(100-240V) or 12V auto lighter (cable included)
Test, troubleshoot, and qualify your copper loop for a profitable triple play with one, easy-to-use tool.
Handheld–weighslessthan 4lbs.(1.8kg)
Morethan16hours typical battery life
Physical
Size (H x W x D) approximately9.8"x5.3"x3.2"(25cmx13.5cmx8.1cm) (does not include the softcase and test leads)
Weight 4.0lbs.(1.8kg)(doesnotincludethesoftcaseandtestleads)
Display 320x240pixelgraphicLCDwithbacklightandadjustablecontrast
LED Indicator charging status indicator (located on the side connector panel)
Communication Port RS-232PCandprinterport(DB-9)
Power
AC Operation operatesfromanexternalACadapter/charger
Battery Type operatesfromaninternalremovableNiMHrechargeablebatterypack(installed)
Battery Life afullychargedbatteryprovidesapproximately16hoursofnormaltestingusageand approximately4hoursofcontinuousTDRorbroadbandtestingusage
Battery Recharge Time 2to3hours(inthetester)forafullydischargedbatterypack
CopperPro Series II
Environmental
Operating Temperature -4°Fto+140°F(unlessotherwisespecified) (-20°Cto+60°C)
Storage Temperature -40°Fto+158°F(-40°Cto+70°C)
Battery Charging Temperature
50°Fto104°F(10°Cto40°C)
Humidity Tolerance (opera-tion without condensation)
95%
Rain Resistance IEC60529IP02,IngressProtection:waterdripping
Vibration Random,2g,5Hzto500Hz
Shock 1MeterDropTest
Altitude 4500m(15,000ft)
Standards Compliance
Analog Transmission Parameter Measurement
IEEE743-1995
ADSLx / VDSLx Metallic Interface
ANSIT1.413Issue2;ITUG.992.1a,b;G.992.2ab;G.992.3a,b,l,m;G.992.5a,b;G.993.1;G.993.2
Regulatory Compliance
Safety CAN/CSA-C22.2No61010-1
CE EN61326ClassAEmissionsandImmunity EN61010-1
C O P P E R P R O S E R I E S I I S P E C I F I C A T I O N S
General Specification 990-GM/2+ 990-GM/V-2
Size 4.2x6.6x1.3in.(11x17x3.3cm)
Weight 12.8oz.(364g)
Operating Temperature +12ºFto+122ºF(-10ºCto+50ºC)
Storage Temperature -40ºFto+158ºF(-40ºCto+70ºC)
990 II Battery Oper. Time (modem in “Showtime”)
Typical,4Hrs.Continuous Typical,3Hrs.Continuous
Standards complianceADSL ANSIADSL G.DMTADSL G.LiteADSL2ADSL2+VDSL1VDSL2
ANSIT1.413Issue2ITUG.992.1a,bITUG.992.2abITUG.992.3a,b,l,mITUG.992.5a,b
ANSIT1.413Issue2ITUG.992.1a,bITUG.992.2abITUG.992.3a,b,l,mITUG.992.5a,bITUG.993.1ITUG.993.2
990-GM2 ADSL2+ Golden Modem (optional)
990-GM2 ADSL+Golden Modem
Operational Specifications
Function Range Accuracy
AC Voltage 0Vto220V,60Hz 1%±0.5V
DC Voltage (RIN=100kVdefault;VMV or10MVoptional)
0Vto150V 150Vto240V 240to300V
1%±0.5V 2% 3%
DC Loop Current(430W) 0mAto120ma 2%±0.3mA
Resistance (ShortsandGrounds)
0Ωto100Ω 100Ωto4kΩ 4kΩto ΩM
0.1%±0.10 0.3%±0.10 3%
Leakage Stress 2 kΩto999MΩ 3%
Opens 0ftto3000ft 3kftto50kft 50kftto80kft
1%±5ft 3% 5%
Splits 0kftto50kft 10%DTE±50ft1
RFL FaultResistance(Rf) Loop resistance ResistancetoFault (@Rf=100kΩ) K-TestResistancetoFault
0MΩto30MΩ 0Ωto4000Ω 0Ωto100Ω 100Ωto4kΩ 0Ωto4kΩ
- - 0.1%RTS2±0.10Ω 0.3%RTS2±0.10Ω 1%RTS2±1Ω
Load Coils Count DistancetoFirst
0to6 0to12,000ft
±1 10%±500ft
Tracing Tone Frequency Level
577.5Hz >3.5Vpeak-to-peak
0.1% 10%
VF Noise Impedance Filters MetallicNoise PowerInfluence Power Harmonics
600Ω,900Ω, Bridged3 C,C-Notched,3kFlat,15kFlat,Psopho 0dBrnto10dBrn 10dBrnto100dBrn 40dBrnto120dBrn -60dBmto+20dBm (50Hzto3kHz)
1% - ±2dB ±1dB ±2dB ±2dB ±2dB
VF Loss Signal Level Frequency
-40dBmto+10dBm 100Hzto20kHz
SingleTone:±1dB SmartTone:±2dB 0.1%±2Hz
C O P P E R P R O S E R I E S I I S P E C I F I C A T I O N S
Function Range Accuracy
VF Longitudinal Balance DisturbingFrequency Impedance
0dBto70dB 200Hzto2000Hz 600Ω,900Ω
±2dB 0.1% 1%
Send VF Tone Frequency Amplitude (settable) Impedance
100Hzto20kHz -20dBmto+3dBm 600Ω,900Ω
0.1% ±0.5dB(1dBsteps) 1%
WB/BB Noise/Level Impedance Filters Frequency
100Ω,135Ω, Bridged4
E,F,G,1.3MHz,20MHz 10kHzto1.2MHz5 25kHzto18MHz6
1% - 0.1%,508.63Hzmultiples 0.1%,4312.5Hzmultiples
Amplitude +3dBmto-50dBm -50dBmto-90dBm -90dBmto-105dBm
±1dB7(Bridged=±3dBtypical) ±3dB7(Bridged=±3dBtypical) ±3dBtypical7
Noise Floor -140dBm/Hztypical -
WB/BB Loss Impedance Frequency Magnitude HDSL2/4LoopAttenuation WB/BBLongitudinalBalance DisturbingFrequency (Single Tone) (70ToneMulti-Tone) Impedance Filter
100Ω,135Ω 10kHzto1.2MHz5 25kHzto18MHz6
0dBto50dB 50dBto90dB 0dBto70dB 0dBto20dB 20dBto40dB 40dBto50dB 50dBto55dB 25kHzto18MHz 0.25MHzto18MHz 135Ω,<1.2MHz 100Ω,>1.2MHz 1.3MHz,<1.2MHz 20MHz,>1.2MHz
1% 0.1%,508.63Hzmultiples 0.1%,4312.5Hzmultiples ±1dB7 ±3dB7
±2dB ±3dB7,9 ±2dB7,9 ±3dB7,9 ±3dBtypical7,9
0.1%,4312.5Hzmultiples 0.1%,4312.5Hzmultiples 1% -
Operational Specifications (continued)
C O P P E R P R O S E R I E S I I S P E C I F I C A T I O N S
Function Range Accuracy
Send WB/BB Tone Frequency Amplitude Impedance
10kHzto1.2MHz5 25kHzto18MHz6 0.0dBm(fixed) 100Ω,135Ω
0.1%,508.63Hzmultiples 0.1%,4312.5Hzmultiples ±1dB 1%
WB/BB Impulse Noise Impedance Filters Test Time ImpulseCounter Counter Threshold CountInterval
100Ω,135Ω, Bridged4 E,F,G,1.3MHz,20MHz 1to1440minutes(24hrs.) 0to9999 0dBmto-40dBm -40dBmto-50dBm 8/second
1% - 1% - ±1dB8 ±3dB8(Typical) -
DSL Auto-Test Data Rate estimation ADSL/2(1.104MHz) ADSL2+(2.208MHz) VDSL(17.664MHz)
0–8Mb/s 0-16Mb/s 0-55Mb/s
±0.1Mb/s(typical) ±0.2Mb/s(typical) ±2Mb/s(typical)
TDR Specifications Launch Pulse Impedance Pulse-width VOP Selection Range(VOP=0.64,19Ga.) Range Selection Horizontal Resolution DistancetoReflection Vertical Gain Power Filter Averaging Filter Input Protection
100Ω 20ns,100ns,500ns,1000ns, 2500ns,5000ns 0.300to0.999 30,000ft 10ftto48kft(Auto.) 0.5ftto156ft 0ftto30,000ft 80dB 5kHzHighpass 4waveformaverage ±400Vpeak
1% 10%±5ns - - - - 1%±VOPuncertainty 2 dB - - -
Notes1 Dist.toEnd;Dist.toSplit>50ft;Splitpairsmustbesamelength±5%.2 RTS=ResistancetoStrap 3 Bridged=>100kΩ 4 Bridged=>5kΩ5 Nyquist(Fine)resolution6 DMT(Coarse)resolution7 @25°C±25°C;battery-powered8 AccuraciesspecifiedwithE,F,G,and1.3MHzfilters@centerfrequencies,with100Ωor135Ω terminations.
Additional+/-2dB(typ.)tolerancerequiredfor20MHzfilter 9 0.25MHzto12MHz.Additional±1dBtolerancerequiredfrom12MHzto17.5MHz.
Model Description
990DSL2+ CopperProNextGenCopperLoopAnalyzerwithTDRandwidebandspectralanalysisforADSL2+
990VDSL CopperProNextGenCopperLoopAnalyzerwithTDRandwidebandspectral analysis for VDSL
990-GM/2 ADSL/ADSL2/2+GoldenModemOptionforCopperProSeriesIILoop Testers/Analyzers
990-GM/V-2 ADSLandVDSLGoldenModemOptionforCopperProSeriesIILoopTesters/AnalyzerswithCPEandCOemulation
Ordering Information
N E T W O R K S U P E R V I S I O N
Fluke NetworksP.O.Box777,Everett,WAUSA98206-0777
Fluke Networksoperatesinmorethan50countriesworldwide.Tofindyourlocalofficecontactdetails,go to www.flukenetworks.com/contact.
©2008FlukeCorporation.Allrightsreserved.PrintedinU.S.A.10/20082734896B-ENG-NRevB
Network SuperVision SolutionsFlukeNetworks,aDanahercompany,providesinnovativesolutionsfor testing, monitoring and analyzing telecommunications and enterprise networksandforinstallingandcertifyingthefiberandcopperfoundationofthosenetworks.OurcomprehensivelineofNetworkSuperVision Solutions™ provides network installers, owners, and maintenance professionals with superior vision into their network, combining speed, accuracy and ease of use to optimize network performance.
HeadquarteredinEverett,Washington,FlukeNetworkshasmorethan 500employeesworldwideanddistributesourproductsinmore than50countries.
Worldwide supportLike our products, our support is focused on your evolving needs, with an eye on keeping you on top of the latest technology advances.
• Globalsupportin22countries
• Award-winningproductperformancereliability
• Supportprogramstailoredtoyourneeds
• Solutionsthatcontinuallyanticipateandevolvewithyournetwork, your business and your market opportunities
N E T W O R K S U P E R V I S I O N
ContactFlukeNetworks:Phone800-283-5853(US/Canada)or425-446-4519 (other locations). Email: [email protected].