THAILAND - asean.org · 1 thailand i. rationale for regulation country rationale for regulation...

1

THAILAND

I. RATIONALE FOR REGULATION

COUNTRY RATIONALE FOR REGULATION

Thailand Consumer Protection.

II. REGULATION BODY

COUNTRY REGULATORY BODY

Thailand Thai Industrial Standards Institute (TISI) under the Ministry of Industry.

III. LEGISLATIVE FRAMEWORK

COUNTRY LEGISLATIVE FRAMEWORK

Thailand Industrial Product Standards Act. (1968)

2

IV. MANDATORY STANDARDS

REVISED MATRIX ON MANDATORY STANDARDS FOR THAILAND (AS OF FEB 28, 2017)

Country Total Product

Product type or grouping

STANDARDS

Domestic Standards Please tick

box if mandatory

Relevant International Standards

Extent of Alignment

State reason if MOD

Indicate whether requires:

Safety (S), Environment (E),

EMC,

or combination

Thailand 1 Incandescent lamps TIS 4 Part 1-2529 (1986) IEC 60064 (1993)

IEC 60432-1(1999)

NEQ - S

Thailand 2 Low-voltage distribution link fuses

TIS 10-2529 (1986)

Withdraw and Remove from mandatory standards

IEC 60269-1(1998), IEC 60269-3(1987)

NEQ - S

Thailand 3 PVC insulated Copper cables

TIS 11 Part 1-2553 (2010) TIS 11 Part 2-2553 (2010) TIS 11 Part 3-2553 (2010) TIS 11 Part 4-2553 (2010) TIS 11 Part 5-2553 (2010)

TIS 11 Part 101-2553 (2010)

IEC 60227-1 Ed 3.0 (2007) IEC 60227-2 Ed 2.0 (1997) Am 1 (2003) IEC 60227-3 Ed 2.1 (1997) IEC 60227-4 Ed 2.1 (1997) IEC 60227-5 Ed 2.2 (2003)

All Parts of IEC 60227

MOD

MOD

IDT

IDT

IDT

MOD

Part 1-2553 (2010)

Addition: Subclause 3.4 Packaging

Modification : Subclause 4.1.2

Replace “- two-core cable: no prefer colour scheme;” with “- two-core cable: blue, brown scheme;”

S

3



STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

Thailand 4 Ballast for fluorescent lamps

TIS 23-2521 (1978)

TISI 23-2558 (2015)

Effective date: Dec 19, 2018

IEC 60920 (1990), Am.1(1993), Am.2(1995)

IEC 60921(1988),

Am.1(1990), Am.2(1994)

IEC 61347-2-8 (2002), Am 1 (2006)

NEQ

MOD

(Editorial modification)

S

Thailand 5 Starters for fluorescent lamps

TIS 183-2547 (2004) IEC 60155 Ed 4.0

(1993), Am.1 (1995)

IDT - S

Thailand 6 PVC insulated aluminium cables

TIS 293-2541 (1998) - - No IEC standard available

S

Thailand 7 Lampholders for tubular fluorescent lamps and starterholders

TIS 344-2549 (2006) IEC 60400 Ed 6.2

(2004)

IDT - S

4



STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

Thailand 8 Electric irons TIS 366-2547 (2004)

TIS 1375-2547 (2004)

-

IEC 60335-2-3 (2002)

IEC 60335-1 Am.1 (2004)

IDT

MOD

See TIS 1375-2547

TIS 1375-2547 Subclause 24.4

In the first paragraph, add words “TIS 166, TIS 1234” before word “IEC 60083 or IEC 60906-1”.

Subclause 25.25

In the last sentence of the first paragraph, replace words “IEC 60083” with “TIS 166 and TIS 1234”

S

Thailand 9 Motor-compressors : safety requirements

TIS 812-2548 (2005)

TIS 812-2558 (2015)

Effective date: Aug 16, 2017

IEC 60335-2-34 (2002)

IEC 60335-2-34 Ed 5.0 (2012)

IDT

S

Thailand 10 Electrical Switches TIS 824-2551 (2008) IEC 60669-1 Ed 3.1

(2000) and Am 2

(2006)

IDT S

5



STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

Thailand 11 Electric stoves; open type heating elements: safety requirements

Grills, toasters and similar portable cooking appliances

TIS 870-2532 (1989)

Replaced with

TIS 1641-2552(2009)

Effective date: Aug 16, 2017

IEC60335-2-9

IEC 60335-2-9 Ed 5.2 (2006)

NEQ

MOD

Reference Standard IS 2994 (1965) Am.1

JIS C 9201 (1975)

Sub-clause 6.1 Modification :

Appliances shall be class I, class II or class III.

S

6



STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

Thailand 12 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs)

TIS 909-2548 (2005) IEC 61009-1 (2003) MOD See TIS 909-2548

Sub-clause 1

Replace

“for rated voltages not exceeding 440 V a.c.;”

with

for rated voltages between 220 and 440 V a.c.;

Sub-clause 5.3.1

Delete the second row of the table in subclause 5.3.1

Sub-clause 9.22.1.3 Replace the testing temperature

“25 oC 3

oC”

with

“37 oC 3

oC”

S

Thailand 13 AC electric fans : safety requirements

TIS 934-2533 (1990)

TIS 934-2558 (2015)

Effective Date: Aug 16, 2017

IEC 60335-2-80

IEC 60335-2-80 Ed 2.2 (2008)

NEQ

IDT

No Reference S

7



STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

Thailand 14 Fluorescent lamps : safety requirements

Double-Capped Fluorescent lamps : safety specification

TIS 956-2533 (1990)

TIS 956-2557 (2014) Effective Date: Oct 3, 2017

IEC 60081

IEC 61195 (1999)

Am 1(2012)

NEQ

MOD

Reference Standard IEC 60081 (1984) BS 5101 Part 1 (1975)

BS 5101 Part 3 (1975)

(Editorial modification)

S

Thailand 15 Electric rice-cookers : safety requirements

TIS 1039-2547 (2004)

TIS 1375-2547 (2004)

-

IEC 60335-2-15 (2002-07)

IEC 60335-1, Am.1 (2004)

MOD

MOD

See TIS 1375-2547

TIS 1375-2547

Subclause 24.4


Subclause 25.25


S

8



STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

Thailand 16 Mains operated electronic and related apparatus for household and similar general use : safety requirements

TIS 1195-2536 (1993) IEC 60065 (1985) Am.1 (1989

MOD TIS 1195-2536

Sub-clause 9.1.1

the current measured shall not exceed 0.3 mA (peak)

S

Thailand 17 Uninterruptible power system

TIS 1291 Part 1-2553 (2010) TIS 1291 Part 2-2553 (2010) TIS 1291 Part 3-2555 (2012)

IEC 62040-1 Ed 1.0 (2008) IEC 62040-2 Ed 2.0 (2005)

IEC 62040-3 Ed 1.0 (1999)

IDT

IDT

IDT

- S

9



STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

Thailand 18 Tumbler dryers : safety requirements

TIS 1389-2539 (1996) IEC 60335-2-11 Ed 4.0 (1993)

MOD TIS 1389-2539 Sub-clause 1.1 Scope excluding rated voltage 480 V. Sub-clause 4.3.1.4 temp. rise of the accessible front surface made of glass, ceramic and plastic parts. Sub-clause 4.14.6 minimum cross-sectional area of conductors of supply cords Sub-clause 4.15.3 nominal cross-sectional area of conductors. Sub-clause 4.18.2 requirements on creepage distance, clearance and distance through insulation.

S

Thailand 19 Clothes washing machines household use

Washing machines : safety requirements

TIS 1462-2548 (2005)

TIS1463-2556 (2013)

Effective date: Sep 26, 2017

IEC 60335-2-7 Ed 7.0 (2008-06)

IDT

E

S

10



STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

Thailand 20 Electric fryers: safety requirements

TIS 1509-2547 (2004)

TIS 1375-2547 (2004)

-

IEC 60335-2-13 Ed 5.0 (2002)

IEC 60335-2-15 Ed5.0 (2002)

IEC 60335-1 Am.1 (2004)

MOD

MOD

MOD

TIS 1509-2547

Clause 1

Scope of the Standard cover fryers, frying pans and similar appliances as defined in Subclause 3.101,3.102 and 3.103

Remark 102

Scope of the Standard does not cover high frequency-heating electric fryers.

Subclause 3.101

Definition of electric fryers.

Subclause 3.102

Definition of electric deep-fryers.

Subclause 3.103

Definition of electric frying pans.

Clause 6

Classified electric fryers into 3 classes; 0I, I and II.

S

11



STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

see TIS 1375-2547

Subclause 24.4


Subclause 25.25


12



STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

Thailand 21 Instantaneous water heaters :safety requirements

TIS 1693-2547 (2004)

TIS 1375-2547 (2004)

-

IEC 60335-2-35 (2002-10)

IEC 60335-1, Am.1 (2004)

IDT

MOD

See TIS 1375-2547

TIS 1375-2547 Subclause 24.4


Subclause 25.25


S

13



STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

Thailand 22 Microwave ovens safety requirements

TIS 1773-2548 (2005)

TIS 1375-2547 (2004)

IEC 60335-2-25 Ed.5.0 (2002)

IEC 60335-1 Am.1 (2004)

IDT

MOD

See TIS 1375-2547

TIS 1375-2547

Subclause 24.4


Subclause 25.25


S

Thailand 23 Lighting and similar equipment : radio disturbance limits

TIS 1955-2551 (2008) CISPR 15 Ed 7.1 (2007)

MOD (editorial modification)

EMC

14



STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

Thailand 24 Appliances for skin or hair care : safety requirement

TIS 1985-2549 (2006)

TIS 1375-2547 (2004)

IEC 60335-2-23 Ed 5. 10 (20053)

IEC 60335-1 Am.1 (2004)

IDT

MOD

See TIS 1375-2547

TIS 1375-2547

Subclause 24.4


Subclause 25.25


S

15



STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

Thailand 25 Electric thermo pots TIS 2062-2543 (2000) IEC 60335-2-15 Ed 4(1995)

IEC 60335-1 Am.1 (2004)

MOD (editorial modification) TIS 2062-2543 Contents of the standard deals with thermo pots only. TIS 1375-2547 Subclause 24.4 In the first paragraph, add words “TIS 166, TIS 1234” before word “IEC 60083 or IEC 60906-1”. Subclause 25.25 In the last sentence of the first paragraph, replace words “IEC 60083” with “TIS 166 and TIS 1234”

S

Thailand 26 Room Air Conditioners Environment Requirement

: Energy Efficiency

TIS 2134-2553(2002) No Reference - - E

Thailand 27 Household refrigerators : environmental requirements : energy efficiency

TIS 2186-2547 (2004) No Reference - - E

16



STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

Thailand 28 Household refrigerators : safety requirements

TIS 2214-2548 (2005)

TIS 1375-2547 (2004)

IEC 60335-2-24 Ed 6.0 (2002) IEC 60335-1 Am.1 (2004)

MOD TIS 2214-2548

Subclause 5.7

Addition “Appliances used in Thailand are testes at the ambient temperature for appliances used in warm damp equable climates” Subclsuse 6.1 Addition “Appliances used in Thailand shall be class OI, class I class II and Class III”

see TIS 1375-2547

TIS 1375-2547

Subclause 24.4


Subclause 25.25


S

17



STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

Thailand 29 Secondary cells and batteries containing alkaline or other non-acid electrolytes - safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications

TIS 2217-2548 (2005) IEC 62133 Ed.1.0 (2002)

IDT S

Thailand 30 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1 : general rules

TIS 2425-2552 (2009) IEC 61008-1 Ed.2.1 (2002)

MOD (Editorial modification)

S

Thailand 31 Ballasts for tubular fluorescent lamps: energy efficiency requirements

TIS 2337-2557 (2014)

Effective Date: Aug 16, 2017

IEC 62442-1 (2011) NEQ E

Thailand 32 Self-Ballasts for general Lighting service

TIS 2334-2557 (2014)

Effective Date: Feb 23, 2018

IEC 60968 (2012) MOD (Editorial modification)

S

Thailand 33 Single-capped fluorescent lamps

TIS 2335-2557 (2014)


IEC 61199 (2011) MOD (Editorial modification)

S

Thailand 34 Cord extention sets TIS 2432-2555 (2012)


IEC 60884-2-7 (2011) MOD Plug and socket Configuration-conform with TISI 166

S

18

V. MODE OF REGULATION AND TYPES OF CONFORMITY ASSESSMENT REGIMES

COUNTRY TYPES OF CON-FORMITY ASSESS-

MENT REGIMES

MODE OF REGULATION

Thailand Certification Product Certification System of TISI consists of two phases:

1. License Granting

Granting a license is based on:

1.1 The results of tests which are conducted on products in accordance with the application standards.

Consideration on this matter may be:

(1) Product testing by designated laboratories, or

(2) Product testing by testing laboratories being accreditation to ISO/IEC 17025, or

(3) Product testing by testing at manufacturer’s premises under supervision of TISI.

1.2 The results of manufacturer’s quality control system assessment according to specified conditions.

Consideration on this matter may be:

(1) Factory visit for quality control system assessment, or

(2) Acceptation of quality system certificates, or

(3) Acceptation of CoC from the ASEAN Listed CB.

2. Surveillance

After granting a license, the licensee will be followed up by:

2.1 Product sampling from factories for testing,

2.2 Product sampling from market for testing,

2.3 Product sampling for testing each import,

2.4 Factory visit for audit.

19

VI. FLOWCHART OF MEMBER COUNTRIES’ REGIME

Application for Licences

Product Testingl Manufacturer’s Quality Control

System Assessment

Licence Granting Refuse of

Application

Surveillance

Pass Fail Pass Fail

20

VII. MAINS VOLTAGE, FREQUENCY AND MAINS PLUG CONFIGURATION

Country Mains

Voltage and Tolerance

Mains Frequency and Tolerance

Applicable Legislation

Mains Plug Configuration

Domestic Standard

Please tick box if mandatory

Relevant International Standard

Extent of Alignment -

Diagram of Mains Plug Configuration-

Thailand Bangkok Metropolitan Area

230 volts 1-phase 2 wires with earth tolerance Max 237 V and Min 214 V

50 Hz

± 1%

NA TIS 166-2535 - - -

TIS 166-2547(2004)

Other Areas

220 volts 1-phase 2 wires tolerance Max 240 V and Min 200 V

Bangkok Metropolitan Area


50 Hz

± 1%

NA - - - -

21

Country Mains Voltage and Tolerance

Mains Frequency and Tolerance

Applicable Legislation

Mains Plug Configuration

Domestic Standard

Please tick box if mandatory

Relevant International Standard

Extent of Alignment -

Diagram of Mains Plug Configuration-

Other Areas


VIII. CONTACT PERSON

Country Contact Person and Address

Thailand Mr.Sathaporn Rungrattanaubol Standards Division Thai Industrial Standards Institute (TISI), Ministry of Industry, Rama VI Street, Bangkok 10400 Thailand Telephone (662) 202 3495, Telefax (662) 202 3495 E-mail : [email protected]

mailto:[email protected]

THAILAND - asean.org · 1 thailand i. rationale for regulation country rationale for regulation...

Documents

Transcript of THAILAND - asean.org · 1 thailand i. rationale for regulation country rationale for regulation...