Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th...
-
Upload
invest-northern-ireland -
Category
Business
-
view
28 -
download
1
Transcript of Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th...
![Page 1: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/1.jpg)
ulster.ac.uk
Textiles and Multi-axial ReinforcementsDr Alistair McIlhagger
![Page 2: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/2.jpg)
Contents
• Technical Textiles• Textiles/Composites in NI• ECRE• Principle Areas• Ulster Research• Historical Importance in NI• The Technology of Weaving• Benefits of 3D• Challenges• NIACE• Competence Centre Projects• Sensing
![Page 3: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/3.jpg)
Technical Textiles
• Coined in the 1980s to describe the growing variety of products and manufacturing techniques being developed primarily for their technical properties and performance rather than their appearance or other aesthetic characteristics - superseded an earlier term 'industrial textiles' which had become too restrictive in its meaning to describe the full complexity and richness of this fast growing area.
Source -https://connect.innovateuk.org/web/technical-textiles
![Page 4: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/4.jpg)
Textiles/Composites in NI
• Mackies, Courtaulds, Langford etc
![Page 5: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/5.jpg)
World Class Examples
![Page 6: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/6.jpg)
Engineering Composites Research Centre
Background Information• Faculty of Engineering – ERI – ECRE and AmFor –
Firesert, Centre for Sustainable Technologies, Art and Design Research Institute etc
• ECRE approx 35 years textiles/composites• Bombardier Transformation Programme• Course provision and development • Royal Academy Bombardier Professorial Chair
![Page 7: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/7.jpg)
Principle Areas
Principal areas
• Advanced design, manufacture and analysis of preform composite structures
• Advanced machine development for preform manufacture
• Development of “bespoke” advanced materials solutions
• Skills development and training
• Grant applications and funding – national/international
• Access to unique manufacturing and testing facilities
• Project management and financial development
• Certification and standards implementation
• Application of novel fibre and resin systems
• Development of cost/life cycle modelling including recycling/reuse issues
![Page 8: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/8.jpg)
Ulster Research
![Page 9: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/9.jpg)
Ulster Research
![Page 10: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/10.jpg)
Ulster Research Microvascular
![Page 11: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/11.jpg)
Ulster Research Microvascular (contd)
![Page 12: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/12.jpg)
Waste Materials
![Page 13: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/13.jpg)
Historical Importance in NI
Most Famous Image in the Early History of Computing
Portrait woven in silk on a Jacquard loom and required 24,000 punched cards to create (1839). Charles Babbage - inspired him in using perforated cards in his analytical engine.
![Page 14: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/14.jpg)
Historical
Early aircraft used woven clothcovering. It was sewn overa covering of wooden and/orsteel tube frames and formers
Early commercial aircraft hadwoven cloth covering the wingsand aft body. The cloth was stiffened and filled (to preventair leakage) with cellulose dope
![Page 15: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/15.jpg)
Market Information
The growth of composites (as a high strength to weight ratio material) is follows:
Update 2014 report
• Total Predicted Market Size for Carbon Fibre all Industries $13.6bn (2010)
• Aerospace Predicted market size (40%) $5.5 bn (2010)
• The Aerospace market is predicted to increase to 90% by 2025
• The market for 3D Woven Carbon Fibre Preforms is in very early stages
• The potential market for 3 D woven Carbon fibre composites is estimated to be in excess of £100 million pa. Globally across the aviation industry (aerospace structural and engine components)
• The major carbon fibre manufacturers have increased their raw materials production to 21,000 tonnes pa with a forecast value for 2010 of $13.6 bn
• The growth in carbon fibre across all sectors is predicted to exceed 110000 tonnes pa by 2018 with aviation exceeding 16,000 metric tonnes with an estimated value of $1.27bn
![Page 16: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/16.jpg)
The Technology
3D weaving places selected fibres in the z or out-of-plane direction.
This z direction has been, and still is the Achilles' heel for composites.
![Page 17: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/17.jpg)
Basic Weaving
![Page 18: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/18.jpg)
Comparison
Table: Common methods of preform production (Bannister, 2004)
![Page 19: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/19.jpg)
Advantages of 3D Wovens
Textiles in composites revealed two sets of benefits:
• Delamination resistance- Primarily derived from through thickness orientation of yarns
• Potential for reduced cost- Pre-assembled layers of fibers reduce touch labor- Part consolidation can be realized with near-net-shape manufacturing
![Page 20: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/20.jpg)
Common 3D Weaves
Layer-to-layer Through thickness
Review of Literature Difficult?
- Comparing “like with like”
![Page 21: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/21.jpg)
Weaving at Ulster
leg prosthesis
![Page 22: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/22.jpg)
The Beginning
![Page 23: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/23.jpg)
To the Present
![Page 24: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/24.jpg)
The Opportunity
![Page 25: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/25.jpg)
The Benefits
The impact energy needed to initiate damage in 3D woven carbon composites is up to 60% higher than in a 2D carbon laminate.
3D woven materials are insensitive or at least have very low notch sensitivity.
Impact performance observed using CT
Open hole tension tests with strain field map for a) 6% layer to layer and b) 6% orthogonal structures
![Page 26: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/26.jpg)
The Benefits
Better fatigue properties than the corresponding 2D composite (15% better at 105 cycle at applied stress level of 75% ultimate strength).
Mode I interlaminar fracture toughness up to 20 times higher than the unidirectional carbon fibre reinforced epoxy laminates.
Representation of a DCB test
Image of a layer to layer DCB specimen under load
The fracture surface of a layer-to-layer specimen. Sites where 3D reinforcement was broken are circled
![Page 27: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/27.jpg)
The Component Level
![Page 28: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/28.jpg)
Fabric Designs and Concepts
![Page 29: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/29.jpg)
Some Difficulties
![Page 30: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/30.jpg)
Developments
![Page 31: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/31.jpg)
Other Developments
![Page 32: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/32.jpg)
Use of Advanced Preforms
![Page 33: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/33.jpg)
Weaving
![Page 34: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/34.jpg)
Challenges
Crimp in textiles– Crimp levels influence fiber volume fraction, thickness of fabric, and mechanical performance
of fabric. – High crimp leads to– Reduced tensile and compressive properties– Increased shear modulus in the dry fabric and the resulting composite– Fewer regions for localized delamination between individual yarns.
Development of New Machinery/Processes– Very complex shaped objects can be produced with textile processes– New processes or machinery are required.– Particular emphasis is on placement of bias yarns in woven fabrics
Variation in Weave Design– Formation of a tapered fabric– Weaves have gradients in a single or double axis by changing yarn size in the width or length– Complex shapes can be achieved through “floating” and cutting yarns to reduce total number
of yarns in some section of the part
![Page 35: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/35.jpg)
More Challenges
![Page 36: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/36.jpg)
Advanced Weaving
![Page 37: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/37.jpg)
Physical Limitations within Literature • Current cost of production.
– modifications to machines are needed for shaping capabilities, – capital cost is applied to a few prototypes, the unit cost is tremendous
(no economy of scale)• Processing difficulties.
– infiltration at high pressure, and thermal effects during curing. • frequently results in internal yarn geometry distortions. • elastic and strength properties have high variation.
– thermal effects can result in local disbonds from yarns
![Page 38: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/38.jpg)
Failure Analysis within Literature
![Page 39: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/39.jpg)
NIACE
• NIACE• NISP• Funding Bodies • Academic Institutions• FE Colleges – SERC, BMC• International appeal
![Page 40: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/40.jpg)
Benefits to/from NIACE
•Provides route for reduced development time – roadmap for continuous
development from “blue” sky to full product/commercialisation
•Skills of both universities and companies provides a unique and differentiated
approach to advanced materials usage from concept through to
implementation and full modelling/life analysis
•Shared responsibility for undertaking projects – financial and risk orientated –
ideas/expertise provided by others should also enable new perspectives and
solutions for company
•Potential increased access to funding (and success in applications) –
opportunities to engage in projects with academia and other companies
![Page 41: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/41.jpg)
Benefits to/from NIACE (contd)
•Partnerships with QUB/UU, other companies depending on specific
projects and the interaction of the centre will have on
national/international stage
•Access to cross-border funding and collaboratively with IComp and
its members – Fusion/KTP
•Access to equipment for manufacture and testing.
• “Try out” without purchase of expensive equipment
•Placement of employees within centre – rather than just product
delivery
•Access to different aspects of engineering – manufacturers,
designers etc
![Page 42: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/42.jpg)
Benefits to/from NIACE (contd)
•Place/fund employees students within other organisation/university
concentrating on specific skills
•Physical nature of co-location extremely powerful “vehicle” for
sharing of ideas and skills – provision of seminars to “educate”
•Universities will still be involved in their research and progression
through TRL levels
•A place to bring others !!!!
![Page 43: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/43.jpg)
Competence Centre Projects
• Reusable Bagging• High load joints• Repair• Recycling• etc
![Page 44: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/44.jpg)
Sensing
• Light weight, high-speed, and self-powered wireless fibre optic sensor (WiFOS) structural health monitor system for avionics and aerospace environments
• “Tailored” sensing configurations• Key elements
• System - Collection/Data/”properties”• Powering• Cost• Wireless
![Page 45: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/45.jpg)
Challenges
![Page 46: Textiles and Multi-axial Reinforcements Dr alistair mc ilhagger technical textiles investni 12th june 2015](https://reader034.fdocuments.net/reader034/viewer/2022051400/55b57309bb61eb040e8b4614/html5/thumbnails/46.jpg)
Weaving Technical Challenges