Tetra Pak Ingredient Doser 2000 M1 · Ingredient feeder Standard design Frame The frame is a fully...
4
Application The automatic Tetra Pak ® Ingredient Doser 2000 M1 is designed for the continuous injection of fruit pieces, nuts, candies, jams and other screw conveyable ingredients into ice cream or similar products. Operating principle The ingredient feeder is a self-contained unit ready to be connected to power and ice cream supply. From the hopper the ingredient is dosed by means of a helical dos- ing screw into the lamella pump, which gently delivers the ingredients into the ice cream stream. Further mix- ing is done in the inline mixer before the ice cream passes through the outlet of the feeder. Standard design Tetra Pak Ingredient Dosers 2000 M1 comply with the 3-A sanitary standards of the Food & Dairy Industries Supply Association, USA. The ingredient feeder is produced from high quality materials and is engineered to meet strict standards of hygiene, reliability and durability. All parts of the feeder that are in contact with ingredients or ice cream are manufactured from stainless materials. Tetra Pak ® Ingredient Doser 2000 M1 Ingredient feeder
Transcript of Tetra Pak Ingredient Doser 2000 M1 · Ingredient feeder Standard design Frame The frame is a fully...
ApplicationThe automatic Tetra Pak® Ingredient Doser 2000 M1 is designed for the continuous injection of fruit pieces, nuts, candies, jams and other screw conveyable ingredients into ice cream or similar products.
Operating principleThe ingredient feeder is a self-contained unit ready to be connected to power and ice cream supply. From the hopper the ingredient is dosed by means of a helical dos-ing screw into the lamella pump, which gently delivers the ingredients into the ice cream stream. Further mix-ing is done in the inline mixer before the ice cream passes through the outlet of the feeder.
Standard designTetra Pak Ingredient Dosers 2000 M1 comply with the 3-A sanitary standards of the Food & Dairy Industries Supply Association, USA. The ingredient feeder is produced from high quality materials and is engineered to meet strict standards of hygiene, reliability and durability. All parts of the feeder that are in contact with ingredients or ice cream are manufactured from stainless materials.
Tetra Pak® Ingredient Doser 2000 M1Ingredient feeder
Tetra Pak® Ingredient Doser 2000 M1Ingredient feeder
Standard designFrame
The frame is a fully welded stainless steel construction with sloped surfaces ensuring drainage after cleaning. Three detachable stainless steel side panels ensure easy access to all parts of the machine thereby facilitating maintenance.
The frame is mounted on wheels for easy relocation and positioning.
Hopper
The hopper has a capacity of 40 liters (10 US gal). The hop-per is equipped with dust cover, safety grid and an agi-tator that ensures a constant supply of ingredients to the dosing screw mounted at the bottom of the hopper. The dosing screw meters a constant flow of ingredients into the inlet funnel of the lamella feed pump.
Lamella feed pump
The inlet funnel leads the ingredients into the cavities between the lamellas of the pump. As the pump rotates and the lamellas reach the ice cream stream the lamel-las retract and the ingredients are distributed into the ice cream stream. When the ice cream flows into the lamella pump it forms a U-shape that allows the ingredients to be laid gently in the centre of the ice cream. The design of the lamella feed pump provides:
• Gentle treatment of ingredients
• Easy and efficient cleaning
• Quick and simple assembly/disassembly
Inline mixer
Effective mixing of ingredient and ice cream is carried out in the inline mixer, to obtain a homogenious distribu-tion of the ingredient in the ice cream. The inline mixer is placed directly at the outlet of the lamella feed pump and before the outlet of the ingredient feeder.
Control panel
The Tetra Pak® Ingredient Doser 2000 M1 is equipped with an operator friendly control panel consisting of buttons and potentiometers.
The buttons are used to start and stop the following functions:
• Dosing screw
• Lamella pump
• Inline mixer
• CIP cycle
• Agitator (optional)
Technical data
Shipping data
Hopper filling height 1 150 mm (45’’)
Net weight 310 kg (685 lbs)
Gross weight 505 kg (1 115 lbs)
Volume 2.5 m³ (88 ft3)
Power connection 3 x 230-400 V, 50/60 Hz
Power consumption total 3.2 kW
Lamella pump 1.1 kW (1.5 HP)
Mixer 0.55 kW (0.7 HP)
Dosing screw 0.75 kW (1 HP)
Agitator (optional) 0.75 kW (1 HP)
Pipe diameters 51 mm (2’’)
Max. ice cream pressure 10 bars (145 psi)
Hopper filling height 1 150 mm (45’’)
Measurements in mm (inches)
Dimensions
The potentiometers are used to set the speed of the following functions:
• Dosing screw
• Lamella pump
• Inline mixer
• Agitator (optional)
Hopper capacity 40 l (10 US gal)
Throughput capacity of base product* 100 to 2 000 l/h (26-528 US gal/h)
Throughput capacity of ingredients** 10 to 200 l/h (3-53 US gal/h)
* Ice cream or base product capacities may differ from the indicated values depending on viscosity.
** Ingredient capacities are indicative and may differ slightly for different types of ingredients.
Optional equipment
• Different types of dosing screws are available according to the ingredients to be used and capacity required
• Spare parts
• Adjustable agitator speed
© T
etra
Pak
Inte
rnat
iona
l S.A
., 20
15, 8
0456
, GB
We reserve the rights to introduce design modifications without prior notice. Tetra Pak, and PROTECTS WHAT’S GOOD are trademarks belonging to the Tetra Pak Group.
www.tetrapak.com
