Test Method Template

IE DISTRIBUTION SUITABILITY:IE CONFIDENTIALITY CLASSIFICATION:NATIONAL SECURITY CLASSIFICATION:EXPORT CONTROL CLASSIFICATION:

COMPANY-WIDECONFIDENTIAL INTERNAL USE ONLYNOT APPLICABLENOT APPLICABLE

IE DISTRIBUTION SUITABILITYIE CONFIDENTIALITY CLASSIFICATIONNATIONAL SECURITY CLASSIFICATIONEXPORT CONTROL CLASSIFICATION

COMPANY-WIDECONFIDENTIAL INTERNAL USE ONLYNOT APPLICABLENOT APPLICABLE

Intelligent Energy Proprietary and Confidential Data

Copyright 2012 Intelligent Energy. All Rights Reserved

Document Title:Test Method Title

Document No:TVTP-02

Issuing Dept:Test & Validation

Author:Author

USE OF THIS DOCUMENT

The master copy of this document resides in electronic format. Printed copies of this document are for convenience only (please think of the environment do you really need to print this document?). Verify that the revision of this printed document matches the current revision of the electronic master before use. Ownership of this document may be determined by viewing the electronic master.NotePlease be aware that any link information incorporated into this document will not be available if printed in hard copy.

Approved by:NameTitle

Dept. Senior s nameDept. Senior s title

COMPANY CONFIDENTIAL. Do not reproduce. The information contained herein, including all related documents, drawings, software, etc., is confidential and is the property of Intelligent Energy Limited and must be held in strict confidence and properly safeguarded by the recipient at all times. It may not be copied or reproduced, or disclosed to any other party, except with the prior written authorisation of Intelligent Energy limited. Any authorised copy or reproduction of this confidential information, in whole or part, must include this legend.

Document History

See online IMS SharePoint Version History for details of all iterations of this document.

Contents1Introduction42Objective43Description44Risk Assessment45Pass/Fail Criteria46Step-by-step Procedure47Test Results4

Introduction This section is to introduce the test method, give any background information or technology being assessed.ObjectiveIn this section the main purpose of the test method should be detailed.DescriptionThis section is the part where the test is described and the test piece is explained. The stresses and manner in which they should be applied to the unit under test need to be detailed. It should also specify what measurements need to be taken. However specifics for how to achieve the test should be avoided so the method is applicable to many test pieces.Risk AssessmentThis section should include Necessary test method SSOWs and Risk Assessments reviewed and competency gained if required otherwise N/APass/Fail CriteriaIf a pass/fail criteria is known for the test then it should be detailed here, otherwise how to define the pass/fail criteria should be specified. For example a reference to a requirements document or product specification can be used.If the test does not have a Pass/Fail criteria, For Information Only may be stated.Step-by-step ProcedureThis is the section where it is detailed how the test can be achieved. It should contain equipment that can be used, how measurements can be taken, and if useful a flow chart.Test ResultsIn this section details of how the test results should be recorded and presented can be specified. If useful a standard test results sheet can be created.

End of Document

PR0126 Version 1Page 1 of 5 2009 Intelligent EnergyAll Rights Reserved

Doc No: TVTP-02Test Method TitleIssue: 2

Page 3 of 4