Test and measuring equipment catalogue - euroclust
Transcript of Test and measuring equipment catalogue - euroclust
Test & Measuring EquipmentContents
Contents
www.euroclust.com
Optical Time Domain Reflectometer ECOTDR1 1
Optical Time Domain Reflectometer ECOTDR2 3
CWDM Analyzer ECCWDMA01 4
Optical Power Meter ECOPM1 Series 6
Optical Power Meter ECOPM2 Series 7
Optical Power Meter ECOPMV1 Series 8
PON Power Meter ECPPM01 9
Laser Source ELCS1 Series 10
Laser Source ELCS2 Series 11
Laser Source ELCS3 Series 12
Laser Source ELCS4 Series 14
Visual Fault Locator ECVFL1 Series 15
Visual Laser Source ECVLS1 16
Mini Visual Laser Source ECMVLS1 17
Fiber Ranger (Break Locator) ECFR1 18
Optical Multi Meter ECOMM1 19
Optical Multi Meter ECOMM2 20
Return / Insertion Loss Tester ECRILT1 21
Return / Insertion Loss Tester ECRILT2 22
Optical Variable Attenautor ECOVA1 23
Optical Variable Attenautor ECOVA2 24
Optical Talk Set ECOTS1 25
Optical Fiber Identifier ECOFI1 26
2mbit / E1 Error Rate Tester 27
Transmission Analyzer ECTA101 28
CATV Signal Analyzer ECCATVSA1 30
CATV Signal Analyzer ECCATVSA2 32
ADSL2+ Tester ECASLST1 34
Fiber Microscope ECFM 35
Bench-top Return/Insertion Loss Tester ECBTRILT1 37
Multichannel Loss Analysis Meter ECMLAM1 38
Erbium Doped Fiber Ampliffer ECDFA1 39
Multi-channel Optical Power Detector ECMCHODP1 40
Test & Measuring Equipment
www.euroclust.com
Test & Measuring EquipmentOptical Time Domain Reflectometer ECOTDR1
Optical Time Domain Reflectometer ECOTDR1
K-E
N-0
00-0
9/12
-000
www.euroclust.com
ECOTDR1 is a portable OTDR with stable and durable, which aims at broadcast and telecommunication network measurement.It is also the first OTDR to achieve data share of point-ta-point and point-to-multi-point via internet. Users can remotely controlthis instrument via PC when conducting fiber maintenance and testing.
General Description
• Remotely control the instrument via Internet• 6.4" color TFT LCD• Convenient one-button testing• High-speed signal processing, less measurement time,
and faster result analysis.• USB port, SD card slot, and Ethernet Port• Compact and lightweight• Shock and water proof, Lithium battery to provide more
than 10 hours working time• Linux operating system for easy upgrade• Input Optical auto-detection and Self-protection function• Optical Connector Connection Alarming function• Self-calibrations Function
Properties/Applications
Front Panel
Top Panel
No. Name Description
1 Charging IndicatorRed light - Battery is being chargedGreen light - Battery is fully charged
2 Charging InterfaceUsed to connect to power cord to provide powersupply and recharge the battery)
3 RJ45 Internet InterfaceConnect to internet for remote control, data sharing, and upgrade
4 USB Ports (host and client)Connect to USB drive, keyboard, and PC for datasharing, analysis, print, and system upgrade.
5 Optical InterfaceStandard FC / PC,SC/PC optical Connector(SC/APC is optional)
1
Test & Measuring EquipmentOptical Time Domain Reflectometer ECOTDR1
Optical Time Domain Reflectometer ECOTDR1
www.euroclust.com
Module Specifications
Others
Standard Accessories
Press the on-off button to turn on the device. The main screen will be displayed asfollowing:
Standard Accessories Quantify Standard Accessories QuantifyOTDR 1 FC adapter 1
AC-DC power adapter/charger 1 SC adapter 1Operation guide 1 USB wire 1
Carrying bag 1 Toolbox software CD 1SD card (1G) 1 1
ModelWavelength
(nm)Dynamic
range (dB)Event deadzone (m)
Attenautiondead zone (m)
ECOTDR101 1310±20/1550±20 35/33 <1,5 m <10 mECOTDR102 1310±20/1550±20 37/35 <1,5 m <10 m
Module SpecificationsDistance (km) 5m - 200 kmPulse width (ns) 5ns - 20 μs
Measurement timeuser-defined (smart link)with real-time measuremnet fuction
Distance uncertainty (m) ±(0,5m ±0,001% * testing distance ± resolution)Linearity ±0,05 dB/dBLoss threshold (dB) 0,01 dBLoss resolution (m) 0,001 dBDistance resolution (m) 0,1 mSampling points 64 000Data storage 1 000 item
Display 6,4 inch TFT color LCDFiber adapter FC/PC SC/PCInterface USB (Principal and subordinate each), SD, RJ45Battery built-in reachargeable Li-ion battery (charging time <4 hours, working time >10 hours)Power AC/DC adapter (Input AC90-240V ±10%, Output DC18V)Operating temperature -10°C~40°CStorage temperature -40°C~70°CRelative humidity < 80%Weight < 2,5 kgDimension (mm) 248(L) x 201 (W) x 75 (H)
Description Type Article Nr.Optical Time Domain Reflectometer ECOTDR1 ECOTDR101 EC10.000110.101
Screen Display
Ordering Information
2
www.euroclust.com
Test & Measuring EquipmentOptical Time Domain Reflectometer ECOTDR2
Optical Time Domain Reflectometer ECOTDR2
ECOTDR2 series Optical Time Domain Reflectometer (OTDR) is the new generation of intelligent meter for the detection of fibercommunications systems. With the popularize of optical network construction in cities and countrysides, the measurment of opti-cal network became short and disperse. ECOTDR2 is specially designed for that kind of application, its economic and also haveoutstanding performence.
ECOTDR2 is manufactured with patience and carefulness, following the national standards to combine the rich experience andmodern technology, subject to stringent mechanical, electronic and optical testing, quality assurance. In the other way, newdesign makes ECOTDR2 more smart and compact and multi-purpose, also it has various functions.
Whether you want to detect link layer in the construction and installation of optical network or proceed efficient maintenanceand trouble shooting, ECOTDR2 can be your best assistant.
General Description
• Integrated design, smart and rugged.• Small and light, easy to carry.• Multi-measuring mode, simple to use, finish measurment by just one button.• Realtime mearsuring function, convient to monitor the splicing process.• Warnning function could prevent module of OTDR damaged by optical signal.• Intergrated with visible fault locate system, for the convienience of the detection point in the optical network.• Intergrated with 2 main USB and one sub USB port, for controlling by PC or connect external instructment.• Remote accessible by network cable or USB wire.• Friendly interface, analog keyboard capable.• Storage more than 40000 groups curve.• Provide data simulation software to process, generate and print report.• Battery indicate function.• Long working time for outdoor operation.
Features
• Measure the loss of splicing points, optical connectors and adapters.• Measure the loss of single fiber or cable.• Measure the length of cable, set different refractive index for various fibers.• Locate the position of broken point, Optical connector and adapter.• Measure the discrete reflection ratio between SR points.• Measure return loss for whole fiber ciruit (including connecting points and spoints.
Applications
SpecificationType ECOTDR2Testing wavelength 1310/1550nmDynamic range 32/30dBEvent Dead Zone 1,5mAttenuation Dead Zone 8mPulse Width 3ns~10ìsSampling Resolution minimum 0.25mSampling Point Maximum 128,000 pointsDistance Accuracy ±(1m+measuring distance×3×10-5+sampling resolution)Data Storage 40000 groups of curveInterface Internet port, USB portDisplay 7 inchTFT-LCD (support touch screen function)Battery 7.4V/4.4Ah lithium battery (with air traffic certification), continous 5.5 hoursWorking temperature -10°C~50°CStorage temperature -20°C~75°CDimension (mm) 253(L) x 168 (W) x 73,5 (H) / 1,5 kgOptional Accessory Optical power meter (-60~+5dBm), visible laser source (1~7mW customizable)
Description Type Article Nr.Optical Time Domain Reflectometer ECOTDR2 ECOTDR201 EC10.000110.102
Ordering Information
3
www.euroclust.com
Test & Measuring EquipmentCWDM Analyzer ECCWDMA01
ECCWDMA01 Handheld CWDM Analyzer is specially designed for CWDM installation, maintenance and troubleshooting, whichis able to measure and monitor power values of 10 CWDM channels. ECCWDMA01 can replace high-cost Spectrometers and con-duct quick and reliable measurements in all environments. Thanks for its light, compact and sturdy design, ECCWDMA01 is theideal tool for CWDM installation and maintenance technicians.
General Description
- Hand-held, more compact and easy to operate - TFT LCD display- 10 CH wavelength testing: 1431nm~1611nm - Histogram or list data display modes - Can work as the normal power meter - Inner timing system- Threshold configuration: can preset threshold valure - Data Transfer to PC via USB- Back light function - 10 hours continuous work - Data storage & download
Properties
Histogram mode
List mode
General Power Meter
X axis represents the channels 1~10 from 1431nm to 1611nm. Y axis represents thepower value (dBm). The red value of channel number represents failure to get through thethreshold value.
10 Channels list 3 Kinds of unit: mW / uW / dBm / dB ( REF )The red value represents failure to pass.
There are six wavelengths: 850nm, 1300nm, 1310nm,1490nm, 1550nm, 1625nm.3 kinds of Unit: mW/uW/nW/dBm/dB(REF)
CWDM Analyzer ECCWDMA01
4
www.euroclust.com
Test & Measuring EquipmentCWDM Analyzer ECCWDMA01
Ordering Information
Description Type Article Nr.CWDM Analyzer ECCWDMA01 ECCWDMA01 EC10.000111.101
Technical parameter
Wavelength (nm) 1431 ~ 1611Power Range (dBm) -40 ~ +10Channel Number 10Channel Spacing 20 nmCentral Wavelength ITUChannel Band-pass ITU±6.5nmChannel Power Resolution -±0.01 dBChannel Power Accuracy ±0.5 dBMaximum Input Power 13dBmReturn Loss >45dBClose Channels Insulation 25dBNon-close Channels Insulation 30dBMeasurement Unit mW/uW/dBm/dB(REF)Threshold Setting 10 WavelengthsReference Value(REF) 10 WavelengthsData Storage 1000 setsConnectivity USBDetector Type InGaAsApplication Range Single Mode FiberConnector FC/PC (Interchangeable SC, ST)Backlight YesPower Saving Auto-off after 5 minutes idle
CWDM Module
Calibrated Wavelength (nm) 850,1300, 1310, 1490, 1550, 1625Power Range (dBm) -60 ~ +10Unit mW/uW/nW/dBm/dB(REF)Resolution ±0.25 dB (5%) @25°CConnector FC/PC (Interchangeable SC, ST)Resolution 0.01dB
Optical Power Module
Power Supply NiMH Rechargeable Battery / AC AdaptorBattery Life Continuous Operation 10 HoursWork Temperature 0°C~ 50°CRelative Humidity 0 ~ 95%Dimension (L×W×D) L*W*H 190mm*105mm*55mmWeight 700g
Optical Power Module
Standard Package: Equipment, NiMH battery, AC adaptor, USB data cable, Software CD, Soft carrying case, User guide,Quality report.
CWDM Analyzer ECCWDMA01
5
www.euroclust.com
Test & Measuring EquipmentOptical Power Meter ECOPM1 Series
Optical Power Meter ECOPM1 Series
The ECOPM1 series of Power Meter are designed for use with an Optical Laser Source for performing optical loss measurementson fiber optic cables, this model is designed for the customers who have limited budget. It can meet the basic demand in fieldtest. With the smaller size and weight, it is easier to take in field test.
General Description
- FC/PC- SC/PC- ST/PC interchangeable connector - Manual- Carrying Bag- AC/DC adapter- Test Report
Standard Accessories
Specifications
Ordering Information
Description Type Article Nr.Optical Power Meter ECOPM1 Series ECOPM101 EC10.000100.101Optical Power Meter ECOPM1 Series ECOPM102 EC10.000100.102FC/PC male - LC/PC female adapter ECMIACC01 EC10.000100.001
Item / Model No. ECOPM101 ECOPM102Calibrated Wavelength (nm) Fiber Type 850/1300/1310/1490/1550/1625Detector Type InGaAsConnector Interchangable FC, SC, STAccuracy* ± 0,35 dB ± 1nW ± 0,35 dB ± 10nWResolution 0,01 dBLinearity ± 0,5%Auto Power Off YesBack Light YesReference Value YesTone Detection (Hz) 270,1k,2k (>-40dBm) 270,1k,2k (>-20dBm)Measuring Range (dBm) -60 to +10 @ 1550 nm -40 to +26 @ 1550 nmValue Display dBm/dB/mwOperating Temperature -10 ~ +50°CStorage Temperature -20 ~ +70°CPower Supply Li-ion Battery, 5V AC/DCAdaptorDimension (mm) 115L*62W*30HNet Weight 140g
* Note: Valid at 1550nm, CW, 23±3°C, Relative Humidity < 70%, with an FC connector.
- FC/PCmale - LC/PC female Adapter
Optional Accessories
6
www.euroclust.com
Test & Measuring EquipmentOptical Power Meter ECOPM2 Series
Optical Power Meter ECOPM2 Series
The ECOPM2 series of Power Meter are the advanced version of ECOPM1 series. It is more functional and intelligent thanECOPM1. In the situation of laboratory, LANs, WANs and CATV as well as long distance optical network, the Optical PowerMeters, together with euroclust's Stabilized Laser Sources, can be used to identify optical fiber, measure optical attenuation, ver-ify continuity and evaluate fiber link transmission quality.Auto-WWavelength Recognition: The ECLS201 unit can transmit with a wavelengthidentification digital encrypted protocol,enabling the ECOPM2 Power Meter to automatically swith to the proper calibration Wavelength. This feature reduces the needfor communication between the two technicians and decreases the possibility of making mistakes.Referencing function: Signal encrypting can also give the receiving end information on the power to be used as reference, help-ing ensure efficient referencing, even when the two units are far apart.Computer supported: Memory capacity of 1000 data items; enables data transfer to a PC via USB connection. Wigh the software,the date sheet can be saved as excel or txt, and print out directly.Testing range: Maximum testing range up to 150km (when using euroclust ECLS201 laser source with euroclust ECOPM201/ECOPM202 power meter).
General Description
- Referencing function- Memory capacity of 1000 data items, enables data transfer to a PC via USB connection- LCD backlight for easy operation in darker environments - More connectors are optional and interchangeable by the user- Two powering systems: Internal rechargeable batteries or AC adaptor - Wide measurement range- High accuracy and stability- Auto-off function: saves the power and low power consumption allows extended operation
in the field- Three-year warranty and recommended calibration interval
Features
Technical parameters
Standard Accessories: FC/PC, SC/PC, ST/PC interchangeable connector, Manual, AC/DCadapter, Software (CD), USB cable, Carrying bag, Test report.
Ordering InformationDescription Type Article Nr.Optical Power Meter ECOPM2 Series ECOPM201 EC10.000100.201Optical Power Meter ECOPM2 Series ECOPM202 EC10.000100.202Optical Power Meter ECOPM2 Series ECOPM203 EC10.000100.203Optical Power Meter ECOPM2 Series ECOPM204 EC10.000100.204FC/PCmale - LC/PC female Adapter ECMIACC01 EC10.000100.001Silicon Boot ECMIACC02 EC10.000100.0021,25 mm Universal Adapter ECMIACC03 EC10.000100.003Carrying Box ECMIACC04 EC10.000100.004
Type ECOPM201 ECOPM202 ECOPM203 ECOPM204Calibrated Wavelength (nm) 850/1300/1310/1490/1550/1625Detector Type InGaAsAccuracy* ± 0,2 dB ± 1nW ± 0,2 dB ± 10nWResolution 0,01 dBLinearity ± 5%Auto Power Off YesBack Light YesReference Value YesMeasuring Range (dBm) -70 to +10 @ 1550 nm -50 to +26 @ 1550 nmUSB Interface N/A Yes N/A YesData Storage N/A Yes N/A YesWavelength Recognize N/A Yes (> -40dBm) N/A Yes (> -20dBm)Tone Detection (Hz) 270, 1k, 2k, (> -40dBm) 270, 1k, 2k, (> -20dBm)Operating Temperature -10°C ~ +50°CStorage Temperature -20°C ~ +70°CPower Supply 2pcs Ni-MHH AA(2500mAh); 6V AC/DC adaptorDimension (mm) 160x76x45 (LxWxH)Net Weight 270 g
Note: Valid at 1550nm, CW, 23+3°C, relative humidity < 70%, with an FC adaptor
7
www.euroclust.com
Test & Measuring EquipmentOptical Power Meter ECOPMV1 Series
Optical Power Meter ECOPMV1 Series
ECOPMV1 series testing meter is a collection of the power meter and Visual laser source. As the power meter, it can precisely testthe 850nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm wavelength's power and it can also test the loss of the fiber, cable,various passive devices, when to attach the ECLS laser source; As the Visual laser source, it can chceck the fiber, cable, and con-nector whether there is a breakpoint. It is widely used in communication system.
General Description
- Hand-held, convenient to hold- Small power consumption- Two interface, can use the power meter and visual laser source at the same time - Visual laser source can output the 2Hz and CW- Various power unit display - The range of the power meter can adjust automatically- LED display and back light function- Low power automatically shut down- 10 min, no operation shut down automatically- Rechargeable
Features
Technical parameters
Ordering Information
Description Type Article Nr.Optical Power Meter ECOPMV1 ECOPMV101 EC10.000101.101Optical Power Meter ECOPMV1 ECOPMV102 EC10.000101.102
Type ECOPMV101 ECOPMV102Calibrated Wavelength (nm) Fiber Type -60 ~ +10@1550nm -40 ~ +26@1550nmDetector Type 0,01Connector InGaAsAccuracy* 3nm typical valueResolution 800~1700Linearity ± 0,35 dB ± 1nW ± 0,35 dB ± 10nWAuto Power Off CLASS IIIABack Light 650±10nmReference Value 2Hz/CWTone Detection (Hz) 1mWMeasuring Range (dBm) FC/PCValue Display >160 (Standard)Operating Temperature Recheargeable Li-ion battery 3,6V/DC 5V/500mA (USB adaptor)
Note: 1) Valid at 1550nm, CW, 23°C, relative humidity < 70%, FC adaptor2) Multi-mode fiber (62,5/125μm)
Work temperature -10°C ~ +50°CStorage temperature -20°C ~ +70°CWork humidity <90% RHDimensions 115x62x30 (LxWxH)Net weight 140g
8
www.euroclust.com
Test & Measuring EquipmentPON Power Meter ECPPM01
PON Power Meter ECPPM01
The industry's advanced PON-specific power meter, the ECPPM01 is the flagship of euroclust line of test instruments specificallyintended for FTTH and FTTP systems. The ECPPM01 is the ideal tool for FTTH/FTTP service activation and troubleshooting.
General Description
- Hand-held and battery operated- TFT LCD Display with high resolution- Filtered measurements with distinct power display- Simultaneous measurement and display power lever of 1310, 1490, 1550 nm WL- Pass/Fail function available. Up to 10n user defined threshold- Ability to upgrade software through USB interface- 1000 Sets Data Storage- Software to generate Testing Report
Features
Technical parameters
Standard Accessories: FC/PC, SC/PC, ST/PC interchangeable connectors, Manual, AC/DC adapter, Software (CD), USB cable,Carrying bag, Test report, Silicon Boot.
Ordering Information
Description Type Article Nr.PON Power Meter ECPPM01 EC10.000102.101FC/PCmale - LC/PC female Adapter ECMIACC01 EC10.000100.001
Measurement Range (ContinuousDatastream)
1310 nm 1490 nm 1550 nm-40 dBm ~ +10dBm -50 dBm ~ +15dBm -50 dBm ~ +20dBm
Burst measurement range (1310 burstedsignal) -32 dBm ~ +10dBm
Spectral Passband 1310 nm 1490 nm 1550 nm1260 nm ~ 1360 nm 1480 nm ~ 1550 nm 1539 nm ~ 1565 nm
Insertion Loss 1,5 dBAccuracy * +0,5 dBLinearity +0,2 dBData Storage 1000 SetsDisplay 2,8 inch TFT LCDRefresh Rate of Display 2,5 HzThreshold 10 sets (configured via PC-based software)Auto Power Off YesNumber of Ports 2 (1 for ONU, 1 for OLT&.Video)Operating Temperature -10°C ~ +50°CRelative Humidity 0%~95%, non-condesingPower Supply 1,2V*4pcs Ni-MH AA; 12V AC/DC adaptorBattery life >20 hoursDimension (mm) 190x105x55 (LxWxH)Net Weight 700 g
Note: Valid at 1550nm, CW, 23+3°C, relative humidity < 70%, with an FC adaptor
Throughout the maintenance phase, various transmission problems-fiber cuts, damaged/dirty connectors, macrobendings, opticaltransmitter failure, etc. -may ultimately cause signal loss or degradation. Benefit from the ECPPM01 troubleshooting functionalities:- Quick, on-site test and measurement of PON signals, anywhere on the network - Fault identification and isolation
Troubleshooting Testing
Optimizing network reliability requires that all PON signals be measured all the way throughservice activation to ensure the meet established standards. The ECPPM01 offers the fea-tures to address this need:- Pass-through connection for ONT signal measurement and simultaneous measurement
of all PON signals- Filtered detectors for indivisual measurement of each wavelength - Upstream burst detection at 1310 nm
Service Activation Testing
9
www.euroclust.com
Test & Measuring EquipmentLaser Source ECLS1 Series
Laser Source ECLS1 Series
The ECLS1 series laser source offer excellent stability and portability for accurate fiber optic testing. Single output port providesstable laser power at dual-wavelength. The compact unit operates in either continuous wave (CW) mode or modulated mode. Alow battery indicator reminds the user of replacing the battery.
General Description
Technical parameters
Standard Accessories: FC/PC, Manual, AC/DC adapter, Battery, Carrying bag, Test report.
Ordering Information
Description Type Article Nr.Laser Source ECLS1 Series ECLS101 EC10.000200.101Laser Source ECLS1 Series ECLS102 EC10.000200.102FC/PCmale - LC/PC female Adapter ECMIACC01 EC10.000100.001
Type ECLS101 ECLS102Output Wavelength (nm) 1310 & 1550 850 & 1300Emitter Type LDConnector FC/PCOutput Stability Short Term (15 minutes):<0,1 dB Long Term (5 hours or above):<0,2 dBCentral Wavelength ± 20 nmSpectral Width 3 nmOutput Frequency (Hz) 270, 1K, 2KOutput Power -5 dBm ± 0,5 dBAuto Power Off YesBack light YesOperating Temperature -10°C ~ +50°CStorage Temperature -20°C ~ +70°CPower Supply Li-ion Battery; 5V AC/DC AdaptorDimension (mm) 115x65x30 (LxWxH)Net Weight 140 g
Note: Valid at 1550nm, CW, 23+3°C, relative humidity < 70%, with an FC adaptor
10
www.euroclust.com
Test & Measuring EquipmentLaser Source ECLS2 Series
Laser Source ECLS2 Series
ECLS2 series Laser source are advanced version of ECLS1 series Laser Source, with better features and more functions.Auto-WWavelength Recognition: The ECLS2 series LS transmits with a wavelength identification digital encrypted protocol, enabling the ECOPM2 Power Meter toautomatically use the proper calibration wavelength. This feature reduces the need for communication between the two techni-cians and decreases the possibility of making mistakes.
The ECLS2 series LS offer excellent stability and portability for accurate fiber optic testing. Single output port provides stable laserpower at dual wavelengths. The compact unit operates in either continuous wave (CW) mode or modulated mode. A low batteryindicator reminds the user of recharging the battery.
General Description
- Easy-to-use, straight forward operation- Eye-catching handheld appearance- LCD backlight for easy operation in darker environments - Adjustable output- Rechargeable battery inside - 850 & 1300 available for multimode testing- Interchangeable connectors- Three-year warranty and recommended calibration interval
Features
Technical parameters
Standard Accessories: FC/PC, SC/PC, ST/PC interchangeable connector,Manual, Battery, worldwide compatible AC/DC charger , Carrying bag,Test report.
Ordering Information
Description Type Article Nr.Laser Source ECLS2 Series ECLS201 EC10.000200.201Laser Source ECLS2 Series ECLS203 EC10.000200.203FC/PCmale - LC/PC female Adapter ECMIACC01 EC10.000100.001Silicon Boot ECMIACC02 EC10.000100.002
Type ECLS201 ECLS203Output Wavelength (nm) 1310 & 1550 850 & 1300Emitter Type LD
Output StabilityShort Term (15 min.): <+0,05 dB @ 1310, 1550 nm; +0,1 dB @ 850 & 1300Long Term (5 hours.): <+0,1 dB @ 1310, 1550 nm; +0,2 dB @ 850 & 1300
Central Wavelength 1310 + 20 nm & 1550 + 20 nm 850 + 10 nm & 1300 + 20 nmSpectral Width 3 nmOutput Frequency (Hz) 270, 1K, 2KOutput Power -5 dBm ± 0,5 dBAdjustable Range +3 dB, 0,1 dB/step N/A +3 dB, 0,1 dB/step N/AAuto Power Off YesBack light YesOperating Temperature -10°C ~ +50°CStorage Temperature -20°C ~ +70°CPower Supply 2pcs Ni-MHH AA(2500mAh)Dimension (mm) 160x76x45 (LxWxH)Net Weight 270 g
Note: Valid at 1550nm, CW, 23+3°C, relative humidity < 70%, with an FC adaptor
11
www.euroclust.com
Test & Measuring EquipmentLaser Source ECLS3 Series
Laser Source ECLS3 Series
ECLS3 series Laser source are advanced version of ECLS2 series Laser Source, with one more wavelength for FTTX PON testing.
Auto-WWavelength Recognition: The ECLS3 can transmit with a wavelength identification digital encrypted protocol, enabling the ECOPM2 Power Meter to auto-matically switch to the proper calibration wavelength. This feature reduces the need for communication between the two tech-nicians and decreases the possibility of making mistakes.
The ECLS3 series offer excellent stability and portability for accurate fiber optic testing. Single output port provides stable laserpower at threel wavelengths. The compact unit operates in either continuous wave (CW) mode or modulated mode. A low bat-tery indicator reminds the user of recharging the battery.
Testing RangeMaximum testing range up to 150 km (when using euroclust ECLS3 laser source with euroclust ECOPM201/202 power meter).
General Description
- Easy-to-use, straight forward operation- Eye-catching handheld appearance- LCD backlight for easy operation in darker environments - +3 dB adjustable output- Rechargeable battery inside - 1310 & 1490 & 1500 available for PON testing- Three-year warranty and recommended calibration interval- FC/PC, ST/PC, SC/PC interchangeable connectors
Features
Technical parameters
Standard Accessories: FC/PC, SC/PC, ST/PC interchangeable connector, Manual, Carryingbag, Battery, AC/DC charger, Test report.
Ordering Information
Description Type Article Nr.Laser Sources ECLS3 Series ECLS301 EC10.000200.301Laser Sources ECLS3 Series ECLS302 EC10.000200.302Silicon Boot ECLS30XSB EC10.000201.304Carrying Box ECLS30XCB EC10.000201.303
Type ECLS301 ECLS302Output Wavelength (nm) 1310 & 1490 & 1550Emitter Type LD
Output StabilityShort Term (15 min.): <+0,05 dB @ 1310, 1550 nm; +0,1 dB @ 1490Long Term (5 hours.): <+0,1 dB @ 1310, 1550 nm; +0,2 dB @ 1490
Central Wavelength +20 nmSpectral Width 3 nmOutput Frequency (Hz) 270, 1K, 2KOutput Power -5 dBm ± 0,5 dBAdjustable Range +3 dB, 0,1 dB/step N/AAuto Power Off YesBack light YesOperating Temperature -10°C ~ +50°CStorage Temperature -20°C ~ +70°CPower Supply 2pcs Ni-MHH AA(2500mAh)Dimension (mm) 160x76x45 (LxWxH)Net Weight 270 g
Note: Valid at 1550nm, CW, 23+3°C, relative humidity < 70%, with an FC adaptor
12
www.euroclust.com
Test & Measuring EquipmentLaser Source ECLS3 Series
Laser Source ECLS3 Series
ECLS3 series Laser source are advanced version of ECLS2 series Laser Source, with one more wavelength for FTTX PON testing.
Auto-WWavelength Recognition: The ECLS3 can transmit with a wavelength identification digital encrypted protocol, enabling the ECOPM2 Power Meter to auto-matically switch to the proper calibration wavelength. This feature reduces the need for communication between the two tech-nicians and decreases the possibility of making mistakes.
The ECLS3 series offer excellent stability and portability for accurate fiber optic testing. Single output port provides stable laserpower at threel wavelengths. The compact unit operates in either continuous wave (CW) mode or modulated mode. A low bat-tery indicator reminds the user of recharging the battery.
Testing RangeMaximum testing range up to 150 km (when using euroclust ECLS3 laser source with euroclust ECOPM201/202 power meter).
General Description
- Easy-to-use, straight forward operation- Eye-catching handheld appearance- LCD backlight for easy operation in darker environments - +3 dB adjustable output- Rechargeable battery inside - 1310 & 1550 & 1625 available for PON testing- Three-year warranty and recommended calibration interval- FC/PC, ST/PC, SC/PC interchangeable connectors
Features
Technical parameters
Standard Accessories: FC/PC, SC/PC, ST/PC interchangeable connector, Manual, Carryingbag, Battery, AC/DC charger, Test report.
Ordering Information
Description Type Article Nr.Laser Sources ECLS3 Series ECLS303 EC10.000201.301Laser Sources ECLS3 Series ECLS304 EC10.000201.302Silicon Boot ECLS30XSB EC10.000201.304Carrying Box ECLS30XCB EC10.000201.303
Type ECLS303 ECLS304Output Wavelength (nm) 1310 & 1550 & 1625Emitter Type LD
Output StabilityShort Term (15 min.): <+0,05 dB @ 1310, 1550 nm; +0,1 dB @ 1625Long Term (5 hours.): <+0,1 dB @ 1310, 1550 nm; +0,2 dB @ 1625
Central Wavelength +20 nmSpectral Width 3 nmOutput Frequency (Hz) 270, 1K, 2KOutput Power -5 dBm ± 0,5 dBAdjustable Range +3 dB, 0,1 dB/step N/AAuto Power Off YesBack light YesOperating Temperature -10°C ~ +50°CStorage Temperature -20°C ~ +70°CPower Supply 2pcs Ni-MHH AA(2500mAh)Dimension (mm) 160x76x45 (LxWxH)Net Weight 270 g
Note: Valid at 1550nm, CW, 23+3°C, relative humidity < 70%, with an FC adaptor
13
www.euroclust.com
Test & Measuring EquipmentLaser Source ECLS4 Series
Laser Source ECLS4 Series
ECLS4 series Laser source are advanced version of ECLS2 series Laser Source, with two more calibrated wavelengths.
Auto-WWavelength Recognition: The ECLS4 can transmit with a wavelength identification digital encrypted protocol, enabling the ECOPM2 Power Meter to auto-matically use to the proper calibration wavelength. This feature reduces the need for communication between the two techni-cians and decreases the possibility of making mistakes.
The ECLS4 series offer excellent stability and portability for accurate fiber optic testing. Two output ports provide stable laserpower at four wavelengths. The compact unit operates in either continuous wave (CW) mode or modulated mode. A low batteryindicator reminds the user of recharging the battery.
General Description
- Easy-to-use, straight forward operation- Eye-catching handheld appearance- LCD backlight for easy operation in darker environments - Rechargeable battery- Four wavelengths available for multi-purpuse testing- Three-year warranty and recommended calibration interval
Features
Technical parameters
Standard Accessories: FC/PC, SC/PC, ST/PC interchangeable connector, Manual, Carryingbag, Battery, AC/DC Adapter/Charger, Test report.
Ordering Information
Description Type Article Nr.Laser Source ECLS4 Series ECLS401 EC10.000200.401FC/PCmale - LC/PC female Adapter ECLS402 EC10.000200.402Silicon Boot for ECLS40x ECLS40XCB EC10.000200.403Carrying Box for ECLS40x ECLS40XSB EC10.000200.404
Type ECLS401 ECLS402Output Wavelength (nm) 850/1300/1310/1550 1310/1490/1550/1625Emitter Type LD
Output Stability
Short Term (15 min.): <+0,05 dB @ 1310, 1550 nm; +0,1 dB @ 850 & 1300
Long Term (8 hours.): <+0,1 dB @ 1310, 1550 nm; +0,2 dB @ 850 & 1300
Short Term (15 min.): <0,05 dB @ 1310, 1550 nm; <0,1 dB @ 1490, 1625 nm
Long Term (5 hours or above): <0,1 dB @ 1310, 1550 nm; <0,2 dB @ 1490, 1625 nm
Central Wavelength +20 nmSpectral Width 3 nmOutput Frequency (Hz) 270, 1K, 2KOutput Power -5 dBm ± 0,5 dBAuto Power Off YesBack light YesOperating Temperature -10°C ~ +50°CStorage Temperature -20°C ~ +70°CPower Supply 2pcs Ni-MHH AA(2500mAh)Dimension (mm) 160x76x45 (LxWxH)Net Weight 270 g
Note: Valid at 1550nm, CW, 23+3°C, relative humidity < 70%, with an FC connector
14
www.euroclust.com
Test & Measuring EquipmentVisual Fault Locator ECVFL1 Series
Visual Fault Locator ECVFL1 Series
The ECVFL1 is a compact but powerful visual fault locator, with an output power up to 8dBm, ECVFL1 could be used to locatesharp bends & breaks in jacked or bare fiber up to 10 Km. It could also be used to identify the connectors in patch panel andidentify the poor mated fibers during splicing operation.
General Description
- 3 adjustable output power: 0, 3 8 dBm- Back-light LCD display- Auto-power off
Features
Technical parameters
Standard Accessories: FC/PC, SC/PC, ST/PC interchangeable connector, User's manual,Carrying bag, Rechargeable Li-ion battery, AC Adapter, Test report.
Description Type Article Nr.Visual Fault Locator ECVFL1 Series ECVFL101 EC10.000010.111Visual Fault Locator ECVFL1 Series ECVFL102 EC10.000010.112FC/PCmale - LC/PC female Adapter ECMIACC01 EC10.000100.001
Type ECVFL101 ECVFL102Wavelength (nm) 650 + 10 nmEmitter Type LDConnectory Type FC/PC (interchangeable SC, ST)Modulated Frequency (Hz) 2 HzOutput Power 0, 3, 8 dBm (switchable) -3,0 dBm (switchable)Power Supply AC/DC adaptor & Li-ion BatteryBattery Life 20 hrs. (continuous operation)Operating Temperature -10°C ~ +50°CStorage Temperature -20°C ~ +70°CHumidity 0 ~ 95% (non-condensing)Weight 140 gDimension (mm) 115x65x30 (LxWxH)
Ordering Information
15
www.euroclust.com
Test & Measuring EquipmentVisual Laser Source ECVLS1
Visual Laser Source ECVLS1
The ECVLS1 is a compact but powerful visible fault locator designed troubleshoot on fiber optic cables. Light generated by theseunits will escape from sharp bends and breaks in jacketed or bare fibers, as well as poorly mated connectros. Thus they an iden-tify faults in fiber optic jumper ables, distribution frames, patch panels, and splice trays.
The ECVLS1 locates faults visually by creating a bright red glow at the exact location of the fault on singlemode or multimodefibers. The ECVLS1 is powered by two 1,5 AAA bateries.
General Description
Technical parameters
Standard Accessories: 2,5 mm Universal Connector, (1,25 mm Universal are available at time of ordering), Carrying Case, Manualand Battery
Ordering Information
Description Type Article Nr.Visual Laser Source ECVLS1 ECVLS101 EC10.000010.211Visual Laser Source ECVLS1 ECVLS102 EC10.000010.212Adaptor for 1.25mm ECVLS10XSFA EC10.000010.213
Item / Model NO FHV1A FHV1BEmitter Type LDWavelength (nm) 650 + 10 nmOutput Power >7 mW >1 mWLaser Safety Class CLASS IIIA CLASS IIBModulated Frequency (Hz) 2 HzFiber Type SM & MM fiberPower Supply 1,5V AAA Battery * 2 pcsOperating Time >10 hours >20 hoursOperating Temperature -10°C ~ +50°CStorage Temperature -20°C ~ +70°CRelative Humidity <90% (non-condensing)Dimension (mm) 147mm x13mm (LxØ)Weight 57g (including batteries)
Key FunctionON/OFF key Long keypress to switch ON and switch OFF the instruments2Hz/CW key Short keypress to switch between 2 Hz and CW (continue wavelength)
LED indicating light
ON/OFF key (long keypress)2 Hz/CW (Short Keypress)
Note: Valid at 1550nm, CW, 23+3°C, relative humidity < 70%, with an FC connector
16
www.euroclust.com
Test & Measuring EquipmentMini Visual Laser Source ECVLS1 Series
Mini Visual Laser Source ECMVLS1 Series
euroclust provides the lastest Mini Visual Laser Source ECMVLS1 Series. The design of this visual laser source is totally comply withthe human engineering. It's small in size, easy to operate, portable and integrated with a launching indicator. A visual laser is usually used to inspect the damaged or broken point of a optical fiber, cable, patchcord and etc. If the inspectedfiber does have a defect, user could find the visual laser at the broken or damaged point.euroclust Mini Visual Laser Source ECMVLS1 Series is suitable for both single mode and multiple mode fibers. The performanceof the visual source will act a little different on different fiber coat and color.
General Description
• Totally comply with the human engineering design. Small, portable and durable.• Standard multi-adaptor can be applied to connect with almost any adaptor type. Also pro-vides interchangeable fiber adaptors of serval common types.• Higher output laser power, Max 18km detecting range.• Integrated with continuous wave and 2Hz modulated wave outpur function.
Features
Specification
Description Type Article Nr.Mini Visual Laser Source ECMVLS1 Series ECMVLS11 EC10.000010.214Mini Visual Laser Source ECMVLS1 Series ECMVLS12 EC10.000010.215Mini Visual Laser Source ECMVLS1 Series ECMVLS13 EC10.000010.216Mini Visual Laser Source ECMVLS1 Series ECMVLS14 EC10.000010.217
Ordering Information
Type ECMVLS11 ECMVLS12 ECMVLS13 ECMVLS14Laser launcher level CLASS IIIA CLASS IIIB CLASS IIIB CLASS IIIBOutput power >1mW >10mW >15mW >30mWDetecting range about 5km about 12km about 14km about 15kmBattery life about 23h about 12h about 10h about 6hLaser launcher type LDOptical connector Un / FC (optional)Output wavelength 650nm ± 10nmModulation frequency CW / 2HzPower 2*AAA batteryWorking temperature -10°C ~ +50°CStorage temperature -20°C ~ +70°CAccessories 2*AAA battery, user manual, packing caseDimension & Size L120mm × W33mm × H30mm / about 67,8gNote: * The output power is figured out by testing multiple mode optical fiber.
* The testing range will be different in different fibers* The battery life is figured out by testing two new AAA battery. The battery life will be a little different by using different AAA battery.
17
www.euroclust.com
Test & Measuring EquipmentFiber Ranger (Break Locator) ECFR1
Fiber Ranger (Break Locator) ECFR1
The ECFR101 is a high performance optical fiber troubleshooter for locating fiber break and imperfections. It detects the locationof break point & attenuation points in the optical fiber and displays the result on the LCD. This portable, easy to use fiber rangeris an ideal instrument for fiber cable construction and maintenance.
General Description
- Low Dead Zone of only 10 meters- Back-light LCD display- Rechargeable batteries support up to 5000 times measuement - Data transmission&.storage through mini USB- Build-in Visual Fault Locator
Features
Specifications
Standard Package: rechargeable NiHM battery (4 pcs), AC adapter, PC software, USB trans-mission cable, carrying bag, Warranty card, test report, User's manual.
Ordering Information
Description Type Article Nr.Fiber Ranter (Break Locator) ECFR1 ECFR101 EC10.000011.101
Type ECFR101Fiber Type 9/125 μm Single ModeWavelength 1 550 ± 20 nmEmitter Type LDConnector Type FC/PC (interchangeable SC, ST)
Pulse Width10ns/20ns/40ns/80ns/160ns/320ns/640ns/1280ns/2560ns/5120bs/10240ns/20480ns
Max. Output Power 90 mWMax. Measurement Range 100 Km (Reflection event. >1dB
Distance AccuracyReflection event ± (2 + 0,1% x Distance)Non-Reflection event ± (100 + 0,5% x Distance)
Data Storage 260 measurementsDead Zone 10 m (Reflection event)Power Supply AC/DC adaptor & Rechargeable Batteries* 4Battery Life 5 000 times measurementOperating Temp. -10 ~ +50°CStorage Temp. -20 ~ +60°CHumidity 0~85% (non-condesing)Communication Port Mini USBWeight 400 gDimension 190*105*55 mm
Max Event No.Max Event No. 13 refective
event + 13 Non-refective event
VFLWavelength 650 ± 10 nmOutput Power 5 mW (+/- 1mW changeable)Modulated Frequency 2Hz
Note: Specifications subject to change without notice, FHR3A0, have no VFL fucntion.
18
www.euroclust.com
Test & Measuring EquipmentOptical Multi Meter ECOMM1
Optical Multi Meter ECOMM1
The ECOMM1 series multimeter combines a power meter with a 3- wavelength laser source, for optical fiber network installationand maintenance. With the large capacity of data storage, it's very convenient for field testing and generating the test results toPC through USB interface for further processing.
General Description
- Auto wavelength recognition- Data storage up to 999 sets- USB interface and PC simulation
software available
Features
Technical parameters
Standard Accessories: User Manual, RechargeableBatteries, Carrying Soft Bag, InterchangeableFC/SC/ST connectors, AC/DC Adapter/Charger, PCsoftware, USB Connecting Cable, Test Report
Optional Accessories: Carrying box, Silicon Boot
Ordering InformationDescription Type Article Nr.Optical Multi Meter ECOMM1 ECOMM101 EC10.000300.101Optical Multi Meter ECOMM1 ECOMM102 EC10.000300.102Carrying Box for ECOMM10x ECOMM10XCB EC10.000300.103Silicon Boot for ECOMM10x ECOMM10XSB EC10.000300.104
ECOMM101 ECOMM102
Power Meter
Calibration wavelength (nm) 850/1300/1310/1490/1550/1625Connector Interchangeable FC/SC/STData storage (pieces) 999Ref. Value YesDisplay Units dB / dBm / mW / uWDisplay precision (dB) 0,01Accuracy +0,2 dB +1 nW +0,2 dB +10 nWWavelength Recognition 1310/1490/1550 (input power>-40 dBm) 1310/1490/1550 (input power>-20 dBm)Tone Detection 270Hz/1KHz/2KHz (input power>-40 dBm) 270Hz/1KHz/2KHz (input power>-20 dBm)Measuring Range (dBm) -70 to +10 -50 to +26
LaserSource
Output wavelength (nm) 1310/1550Connecter Interchangeable FC/SC/STModulation frequencies (Hz) 270/1K/2KOutput Power * -5 dBm ± 0,5 dBStability Long-term (8h) * +0,1 dB @ 1310/1550 nm; +0,2 @ 1490 nmStability Short-term (15min) * +0,05 dB @ 1310/1550 nm; +0,1 @ 1490 nmWavelength Recognizing Code Yes
GeneralSpecification
Auto Power off YesPower Supply 2pcs * Ni-HM 1,2V; 2500 mAh; AC/DC AdaptorPC interface USBBattery Life >100 hours (laser off)Storage Temperature -20°C ~ +70°COperating Temperature -10°C ~ +50°CRelative Humidity <90% (Non-condesing)Dimension (mm) 168x76x43 (LxWxH)Weight (Gram) 310
Note: *Valid at 1550nm, CW, 23+3°C, relative humidity < 70%, with FC/PC connector
1310/1490/1550 nm Laser SourceOptical Power Meter
Screen
Wavelength LED indicator
Frequency LED indicatorLaser Source control panelPower Meter control panel
BacklightEnter load mode
Switching power adaptorUSB interface
19
www.euroclust.com
Test & Measuring EquipmentOptical Multi Meter ECOMM2
Optical Multi Meter ECOMM2
The ECOMM2 series multimeter combines a power meter with a 2- wavelength laser source, for optical fiber network installationand maintenance. With the large capacity of data storage, it's very convenient for field testing and generating the test results toPC through USB interface for further processing.
General Description
- Auto wavelength recognition- Data storage up to 999 sets- USB interface and PC simulation
software available
Features
Technical parameters
Standard Accessories: User Manual, RechargeableBatteries, Carrying Soft Bag, InterchangeableFC/SC/ST connectors, AC/DC Adapter/Charger, PCsoftware, USB Connecting Cable, Test Report
Optional Accessories: Carrying box, Silicon Boot
Ordering InformationDescription Type Article Nr.Optical Multi Meter ECOMM2 ECOMM201 EC10.000300.201Optical Multi Meter ECOMM2 ECOMM202 EC10.000300.202Carrying Box for ECOMM20x ECOMM20XCB EC10.000300.203Silicon Boot for ECOMM20X ECOMM20XSB EC10.000300.204
ECOMM201 ECOMM202
Power Meter
Calibration wavelength (nm) 850/1300/1310/1490/1550/1625Connector Interchangeable FC/SC/STData storage (pieces) 999Ref. Value YesDisplay Units dB / dBm / mW / uWDisplay precision (dB) 0,01Accuracy +0,2 dB +1 nW +0,2 dB +10 nWWavelength Recognition 1310/1490/1550 (input power>-40 dBm) 1310/1490/1550 (input power>-20 dBm)Tone Detection 270Hz/1KHz/2KHz (input power>-40 dBm) 270Hz/1KHz/2KHz (input power>-20 dBm)Measuring Range (dBm) -70 to +10 -50 to +26
LaserSource
Output wavelength (nm) 1310/1550Connecter Interchangeable FC/SC/STModulation frequencies (Hz) 270/1K/2KOutput Power * -5 dBm ± 0,5 dBStability Long-term (8h) * +0,1 dB @ 1310/1550 nm; +0,2 @ 1490 nmStability Short-term (15min) * +0,05 dB @ 1310/1550 nm; +0,1 @ 1490 nmWavelength Recognizing Code Yes
GeneralSpecification
Auto Power off YesPower Supply 2pcs * Ni-HM 1,2V; 2500 mAh; AC/DC AdaptorPC interface USBBattery Life >100 hours (laser off)Storage Temperature -20°C ~ +70°COperating Temperature -10°C ~ +50°CRelative Humidity <90% (Non-condesing)Dimension (mm) 168x76x43 (LxWxH)Weight (Gram) 310
Note: *Valid at 1550nm, CW, 23+3°C, relative humidity < 70%, with FC/PC connector
1310/1490/1550 nm Laser SourceOptical Power Meter
Screen
Wavelength LED indicator
Frequency LED indicatorLaser Source control panelPower Meter control panel
BacklightEnter load mode
Switching power adaptorUSB interface
20
www.euroclust.com
Test & Measuring EquipmentReturn / Insertion Loss Tester ECRILT1
Return / Insertion Loss Tester ECRILT1
Description Type Article Nr.Return / Insertion Loss Tester ECRILT1 ECRILT101 EC10.000400.101FC/PC male - LC/PC female adapter ECMIACC01 EC10.000100.001Silicon Boot for ECRILT101 ECRILT101SB EC10.000400.102Carrying box for ECRILT101 ECRILT101CB EC10.000400.103
The ECRILT1 optical insertion/return loss meter is an integrated tester for optic fiber network, and cable manufacturer to verifythe quality of fiber leads, with the features of handheld, intelligent and multi-functional.The meter is designed to be a combination of optical insertion loss tester, optical power meter, laser source and return loss tester.It can not only measure return loss and proceeding the measurement of absolute and relative power value, but also work as aself-testing system to measure optical loss of optic fiber cable and passive device. ECRILT1 is an ideal tool to verify the polish qual-ity of fiber connector, measure optical return loss in field installation, proceed routine inspection. It is no doubt to be an excellentinstrument for Optic Telecom and CATV network, as well lab test and research work.
General Description
- High-precision RL testing at 2 wavelengths (SM 1310/1550nm)- Three instruments in one: return loss meter/power meter/insertion loss
meter- Internal data storage up to 1500 records- Batteries or AC power supply- Interchangeable connectors with FC/SC/ST
Features
Standard Accessories: User Manual, Rechargeable Batteries, CarryingBag, Interchangeable FC/SC/ST connectors, AC/DC Adapter/Charger, PCsoftware CD, USB Connecting Cable, Test Report, FC/APC-FC/PCPatchcord, Cotton Bud.
Optional Accessories: Carrying box, Silicon Boot, FC/PC male-LC/PCfemale Adapter.
Ordering Information
Return loss meterWorking wavelength 1310nm, 1550nmMeasurement range 0~65dBCalibrated wavelengths 1310nm&1550nmMeasurement accuracy 0~55dB:0,4dB; 55~65dB:1dBStability 0,05dB/15minConnector type FC/APC, SC/APC, ST/APCResolution 0,1dBData memory 500 measurement resultsPower Output -2dBmPower meter
Calibrated wavelengths850nm, 1300nm, 1310nm, 1490nm,1550nm, 1625nm
Measurement range -70dBm~7dBm
Measurement accuracy-70dBm~-60dBm:1dB;-60dBm~+7dBm:+0,2dB+1nw
Modulation detection 270HZ, 1KHZ, 2KHZAuto-lambda detection yes
Resolution70~-60dBm:0,1dB; -60~+7dBm:0,01Bm
Data storage 500 measurement resultsConnector type FC/SC/ST
Insert loss meterCalibrated wavelength 1310nm, 1550nmMeasurement range 0~70dBMeasurement accuracy 0~60dB:0,2dB; 60~70dB:1dBData memory 500 measurement resultsConnector type FC/PC, SC/PC, ST/PCOther specifications
AdapterInput: AC100~240V 50/60 HzOutput: DC6V/1A
USB connector yes
Battery2*AA NI-MH 1,2V2500 mAh rechargeable
Working temperature -5~+50°CStorage temperature -20~+70°CWorking humidity 0~90% no condensingSuport remote upgrade
Technical parameters
21
www.euroclust.com
Test & Measuring EquipmentReturn / Insertion Loss Tester ECRILT2
Return / Insertion Loss Tester ECRILT2
Description Type Article Nr.Return / Insertion Loss Tester ECRILT2 ECRILT201 EC10.000400.201FC/PC male - LC/PC female adapter ECMIACC01 EC10.000100.001Silicon Boot for ECRILT201 ECRILT201SB EC10.000400.202Carrying box for ECRILT201 ECRILT201CB EC10.000400.203
The ECRILT2 optical insertion/return loss meter is an integrated tester for optic fiber network, and cable manufacturer to verifythe quality of fiber leads, with the features of handheld, intelligent and multi-functional.The meter is designed to be a combination of optical insertion loss tester, optical power meter, laser source and return loss tester.It can not only measure return loss and proceeding the measurement of absolute and relative power value, but also work as aself-testing system to measure optical loss of optic fiber cable and passive device. ECRILT2 is an ideal tool to verify the polish qual-ity of fiber connector, measure optical return loss in field installation, proceed routine inspection. It is no doubt to be an excellentinstrument for Optic Telecom and CATV network, as well lab test and research work.
General Description
- High-precision RL testing at 3 wavelengths (1310nm, 1490nm, 1550nm)
- Three instruments in one: return loss meter/power meter/insertion loss meter
- Internal data storage up to 1500 records- Batteries or AC power supply- Interchangeable connectors with FC/SC/ST
Features
Standard Accessories: User Manual, Rechargeable Batteries, CarryingBag, Interchangeable FC/SC/ST connectors, AC/DC Adapter/Charger, PCsoftware CD, USB Connecting Cable, Test Report, FC/APC-FC/PCPatchcord, FC/APC-FC/APC Patchcord, Cotton Bud.
Optional Accessories: Carrying box, Silicon Boot, FC/PC male-LC/PCfemale Adapter.
Ordering Information
Return loss meterWorking wavelength 1310nm, 1490nm, 1550nmMeasurement range 0~65dBCalibrated wavelengths 1310nm, 1490nm,1550nmMeasurement accuracy 0~55dB:0,4dB; 55~65dB:1dBStability 0,05dB/15minConnector type FC/APC, SC/APC, ST/APCResolution 0,1dBData memory 500 measurement resultsPower Output -2dBmPower meter
Calibrated wavelengths850nm, 1300nm, 1310nm, 1490nm,1550nm, 1625nm
Measurement range -70dBm~7dBm
Measurement accuracy-70dBm~-60dBm:1dB;-60dBm~+7dBm:+0,2dB+1nw
Modulation detection 270HZ, 1KHZ, 2KHZAuto-lambda detection yes
Resolution70~-60dBm:0,1dB; -60~+7dBm:0,01Bm
Data storage 500 measurement resultsConnector type FC/SC/ST
Insert loss meterCalibrated wavelength 1310nm, 1490nm, 1550nmMeasurement range 0~70dBMeasurement accuracy 0~60dB:0,2dB; 60~70dB:1dBData memory 500 measurement resultsConnector type FC/PC, SC/PC, ST/PCOther specifications
AdapterInput: AC100~240V 50/60 HzOutput: DC6V/1A
USB connector yes
Battery2*AA NI-MH 1,2V2500 mAh rechargeable
Working temperature -5~+50°CStorage temperature -20~+70°CWorking humidity 0~90% no condensingSuport remote upgrade
Technical parameters
22
www.euroclust.com
Test & Measuring EquipmentOptical Variable Attenuator ECOVA1
Optical Variable Attenuator ECOVA1
The ECOVA1 digital variable optical attenuator is a compact, portable instrument widely used in fiber link certification and rou-tine maintenance as well as in lab environment.
General Description
Technical parameters
Standard Accessories: FC/PC, SC/PC, ST/PC interchangeable connectors,Carrying Case, User Manual, Rechargeable Battery, AC/DC Adapter/Charger,Test Report
Optional Accessories: FC/PC male-LC/PC female Adapter, Silicon Boot, CarryingBox
Ordering Information
Description Type Article Nr.Optical Variable Attenuator ECOVA1 ECOVA101 EC10.000103.101Optical Variable Attenuator ECOVA1 ECOVA102 EC10.000103.102FC/PC male - LC/PC female adapter ECMIACC01 EC10.000100.001Silicon Boot for ECOVA101 ECOVA10XSB EC10.000103.103Carrying box for ECOVA101 ECOVA10XCB EC10.000103.104
Model ECOVA101 ECOVA102Attenuation Range * 0~80dB 0~60dBFiber Type SMF 9/125μmCalibrated Wavelengths 1310nm / 1550nmLinearity * <0,3dB
Accuracy *0,2dB @ 0~30dB1,0dB @ 30~60dB2,0dB @ 60~80dB
0,2dB @ 0~20dB0,5dB @ 20~50dB1,0dB @ 50~60dB
Insertion Loss <3dBReturn Loss >50dB (PC)Max Input Power +24dBmPower Supply 1,2V Ni-MH Battery * 2 pcs
ConnectorInterchangeable FC/PC, SC/PC, ST/PC connectors,(FC/APC, SC/APC are available at time of ordering)
Operating Temperature -10°C ~ +50°CStorage Temperature -20°C ~ +60°CRelative Humidity 0%~90% (non-condensing)Dimension (mm) 160mm x 76mm x 45mm (LxWxH)Weight 360g (including batteries)
Note: * Valid at 1550nm, CW, 23+3°C, relative humidity < 70%, with FC/PC connector
- Low insertion loss, wide attenaution range- Two attenaution steps available: 1dB, 0,05dB- Reference function- Presetting values to save frequently used values
Features
- Maintenance for Telecom System- Maintenance for CATV System- Fiber Optic Transmission System & Test Lab- Other Fiber Optic Works
Application
23
www.euroclust.com
Test & Measuring EquipmentOptical Variable Attenuator ECOVA2
Optical Variable Attenuator ECOVA2
Fiber optic attenuator is a device used to reduce the power level of an optical signal. Our portable variable attenuator ECOVA2performs just as well in a laboratory environment as it does in the field. euroclust Variable Fiber Attenuator is unique in the market, due to its special technique which make our instruments not needpowering. It can complement the basic functions of Multiple Applications at a low cost.
General Description
Technical parameters
Standard Accessories: FC/PC connector, Carrying Bag, User Manual, TestReport
Ordering Information
Description Type Article Nr.Optical Variable Attenuator ECOVA2 ECOVA201 EC10.000103.201
Model ECOVA201Calibrated Wavelengths 1310nm / 1550nmLinearity * Bi-directional and continuousInsertion Loss FC/PCReturn Loss <3dBMax Input Power CWAttenuation Range * 0~60dBOperating Temperature -10°C ~ +50°CStorage Temperature -20°C ~ +70°CDimension (mm) 150mm x 80mm x 28mm (LxWxH)
Note: * Valid at 1550nm, CW, 23+3°C, relative humidity < 70%, with an FC connector
- Operating by the single rotary knob, easy and fast- Reliable bi-directional attenaution- Double scale indication- Large attenuation range- No powering system is needed
Features
24
www.euroclust.com
Test & Measuring EquipmentOptical Talk Set ECOTS1
Optical Talk Set ECOTS1
- Two pairs of ECOTS1 supports tri-party communication via clip-on coupler device- Hands-free (HF) speaker provides users with convenient operation- Maximum dynamic range 50dB @ 1550nm for long distance communication
Features
Technical parameters
Standard Accessories: Mains units (unit A and unit B), FC/PC connector,Carrying Bag, User Manual, Battery, Headset, AC/DC Adapter/Charger, TestReport
Optional Accessories: Clip-on Device
Ordering Information
Description Type Article Nr.Optical Talk Set ECOTS1 ECOTS1 EC10.000104.101Clip on device ECOTSICOD EC10.000104.102
ECOTS1Wavelength A: 1310nm, B: 1550nm (unit A works at 1310 nm, unit B works at 1550 nm)Telecommunication system Full duplex communicationFiber Type SM&MM (the dynamic range will shrink 20 dB for MM fiber)Spectral Width * <15nmAdaptor type FC/PCDynamic Range * 50dBOutput Power -3dBmPower Supply Rechargeable Ni-MH Battery & AC/DC adapterOperating Hours 40 hours (standard)Tri-party communication YesHands-free speaker YesOperating Humidity <90% (Non-condensing)Operating Temperature -10°C ~ +50°CStorage Temperature -20°C ~ +70°CDimension (mm) 220mm x 110mm x 45mm (LxWxH)Net weight 550g (including battery)
Note: * Valid at 1550nm, CW, 23+3°C, relative humidity < 70%, with an FC connector
- Energy-saving design, long-time operation- Can be used as a steady laser source- Articulate voice, low background noise- Judgmatical calling function- 32 steps volume control- Low-power alarm- Maximum dynamic range 50dB for long distance communication
Main Features
25
www.euroclust.com
Test & Measuring EquipmentOptical Fiber Identifier ECOFI1
Optical Fiber Identifier ECOFI1
The ECOFI1 Optical Fiber Identifier is a low cost, portable instrument designed to detect optical signals without disrupting traffic.Based on non-destructive macrobending technology, the ECOFI1 doesn't disrupt traffic, damage or overstress the fiber, enablingefficient, accurate and reliable data acquisition. During maintanance, installations, rerouting or restorations, it's often necessaryto isolate a specific fiber. By simply clamping the ECOFI1 onto a fiber, the ECOFI1 will indicate if there is a signal, a modulatedsignal, or traffic and show signal direction.
General Description
Technical parameters
Standard Accessories: Carrying Bag, User Manual, Battery, Two pieces of inter-changeable adapter heads (clamps) for jacketed and coated fiber, Test Report
Ordering Information
Description Type Article Nr.Optical Talk Set ECOFI1 ECOFI1 EC10.000105.101
ECOFI1Recognizable Wavelength Range 900 to 1650nmRecognizable signal type CW, 2kHz, 270Hz +5%Detector Type InGaAs 2pcsClamp Type H0,9/0,25 for bare fibers; H2,0/3,0 for jacketed fiber
Sensitivity @ 1310nm +11dB to -20dBm (continuous Wave); +11dB to -10dBm (Modulated Signal)@ 1550nm +11dB to -30dBm (continuous Wave); +11dB to -18dBm (Modulated Signal)
LED indicator signal traffic; signal frequency (2kHz/1kHz/270Hz); signal intensity (5 grades); low batteryOperating Temperature -10°C ~ +50°CStorage Temperature -20°C ~ +70°CPower Supply 1,5V AA batteries * 2pcsDimension (mm) 202mm x 62mm x 36mm (LxWxH)Weight 270g
Note: * Valid at 1550nm, CW, 23+3°C, relative humidity < 70%, with an FC connector
- Handheld, easy to use- Detect a variety of optical tones, 270Hz, 1kHz and 2kHz- Powered by 2 units of 1,5V AA alkaline batteries- RB 0,25mm, RB 0,9mm, RB 2,0mm, RB 3,0mm clamp available- Transmission direction indication- Intensity display of optical signal- Low battery indication- Buzz indication function
Features
26
www.euroclust.com
Test & Measuring Equipment2mbit/E1 Error Rate Tester
2mbit/E1 Error Rate Tester
ECERT1 is a hand-held equipment designed for 2M bit error rate test, applicable to telecommunication access networks, trans-mission networks and the start-up, check and maintenance of optical communication systems.
Brief Introduction
Technical parameters
Ordering Information
Description Type Article Nr.2mbit/E1 Error Rate Tester ECERT1 EC10.000106.101Car plug-in cable ECMIACC06 EC10.000106.006Serial printer ECMIACC07 EC10.000106.007
DescriptionBit rate 2084Kb/s +50 ppmInterface 75 ohm unbalanced, 120 ohm balancedInput sensitivity 0~-43dBCircuitry code HDB3Frame type Framed/unframedFrame pattern PCM30, PCM30CRC, PCM31, PCM31CRCTest pattern Random pseudocode: 2^15-1, 2^11-1, Fixed code 1111, 0000, 1010Alarm indicator Signal Loss, AIS, Frame Loss, MF Remote Alarm, CRC Error, Patten LOSS, Remote AlarmError insertion Single error insertion, Fixed rate error insertion: 10E-3, 10E-6Serial interface RS-232
Rechargeable batteries6*1,2V AA Ni-MH rechargeable batteries, for 8 hour contineous test, Built-in smart fastcharger, 4,5 charging hours
Power supply AC/DC adapter, 6*1,2V Ni-MH rechargeable batteriesDimension (mm) 215mm x 100mm x 50mm (LxWxH)Weight 700g
- Hand-held structure, solid design, especially suitable for the fieldwork- LCD display with backlight, menu operation- Powered by and integrated with smart fast charging circuit inside- Data storage capacity up to 99 sets- Test results and real-time clock could be maintained safety with a standby Ni-MH rechargeable battery- LED alarm and status indicator- Clock Source: internal, received- 75 ohm and 120 ohm interfaces available
Main Features
- Out of service test/in-service test- Framed/unframed test- 2Mb/s, N*64Kb/s BER test- Timeslot voice monitoring- Error insertion: Single & Fixed rate- Error bit test, time-slot, signal analysis, protocol test- Measurement results can be printed via external serial port printer- PC transmission & management software available
Main Features
AccessoriesStandard Items Quantify Standard Items QuantifyFHE-1 main unit 1pc AC/DC Adapter/Charger 1pc75Ω unbalance test cable 2pcs 120Ω unbalance test cable 2pcsNi-MH rechargeable battery 6pcs Carrying Bag 1pcManual 1pc Test report 1pcSerial cable 1pc PC transmission & management software 1pc
Standard Items Quantify Standard Items QuantifyCigarette lighter cable 1pc Serial printer 1pc
27
www.euroclust.com
Test & Measuring EquipmentTransmission Analyzer ECTA101
Transmission Analyzer ECTA101
The Transmission Analyzer ECTA101 is a multi-functional and full-featured digital transmission system test device, designed forthe installation test, engineering chceck and acceptance, daily maintenance of digital networks, mainly performing channel test,alarm analysis, fault finding and signalling analysis. In addition, this instrument further provides various protocol converters withone-way and bi-directional bit error test function. These capabilities make it ideal for field use.
Introduction
- Frequency and offset measurement- Clock slip measurement- Up to +999ppm transmit clock deviation- Clock source: Internal, Interface of External 2M clock/signal- Real-time transmit circuit open/short indication
Basic Functions
Main Features- Handheld design and easy-to-use - Full-featured measurements to 2M, Datacom- High resolution backlight large LCD screen, with adjustable contrast - Smart navigation mode and multi-languages displays - Extensive error and alarm generation, detection and indication - Histograms analysis of alarm and error events- Up to 99 days continuance test performance - Save/Recall of up to 7 user-defined setups and 70 sets of results- Up to 6 hours operation from a single battery charge- Built-in Li rechargeable battery and smart charger circuit - Can be charged with automobile cigarette lighter battery adapter- Ungradable software via an integrated RS232C interface- Test results uploaded, conserved and printed by PC Manager software
2) Datacom testing- Datacom (V.24, V.35, V.36, X.21, RS-449, RS-485, EIA-530 and EIA-530A) inter-faces BER Testing- ASYNC BER testing with baud rate 300b/s~38,4Kb/s- SYNC BER testing with data rate 300b/s-8Mb/s- DTE or DCE emulation- SYNC clock source and sense selection- Frequency measurement- Handshaking signals control and monitoring
5) Other functions- Real-time clock- Test pattern: PRBS, Fixed Code and 16-BIT User Word - Error injection: Single and Fixed Rate- Manual and auto-timer measurement- ITU-T G.821, G.826, and M.2100 performance analysis
3) G.703 CO testing- G.703 CO 64kb/s BER testing- Octet timing control and monitoring- Frequency and offset measurement- Clock source: Internal, Interface
selectable
4) Protocol converter testing- 2M-Datacom SYNC 64k or Nx64kb/s BER testing- 2M-G.703 CO SYNC 64kb/s BER testing- Frequency and offset measurement- Hanshaking signals monitoring- 2M frame data and alarm monitoring
1) 2M testing- 75ohm and 120ohm line interfaces- HDB3 and AMI line codes- Out-of-service 2Mb/s, Nx64kb/s BER testing- In-service framed and unframed double-channel testing- “PCM simulator” mode testing- Frame data control and monitoring- Timeslot activity monitoring, FAS, N-FAS, TS16MFO analysis- Built-in 64kb/s tone channel listen capability- CAS and CCS signaling generation and monitoring- Round trip delay measurement- Extensive error and alarm generation- VF tone generation and measurement- Level measurement- Pulse mask measurement- Jitter measurements to ITU-T standard O.172
28
www.euroclust.com
Test & Measuring EquipmentTransmission Analyzer ECTA101
Transmission Analyzer ECTA101
SpecificationsItem Description
2M
Internal Clock 2048kb/s ±10ppmFrequency Deviation ±999ppmLine Interface 75Ω (Unbalanced), 120Ω (Balanced); High Input Impedance>2KWLine Code HDB3, AMIFraming Unframed, PCM30, PCM30CRC, PCM31, PCM31CRCReceive Sensitivity >-43dBTx Clock Source Internal, Interface and External 2MHz clock or signalPulse Mask Measurement Comply with G.703Jitter Measurement Comply with G.172Frequency Measurement Accuracy: ±1Hz
Offset MeasurementAccuracy: ±1ppmRange: -999ppm~+999ppm
VF Injection Frequency: 200Hz~3400Hz, Step: 10HzLevel: -60dBm~+3dBm
VF Measurement
Frequency: 200Hz~3400Hz, Accuracy: ±1HzLevel range: -60dBm~+3,14dBm-60dBm~-21dBm, accuracy: ±2,87dBm-20dBm~+3,14dBm, accuracy: ±0,21dBm
Delay Measurement Accuracy: ±1μs
G.703 COLine Rate 64kb/s ±100ppmLine Interface 120Ω, BalancedLine Code AMI
Datacom
Line Interfaces V.24, V.35, V.36, X.21, RS-449, RS-485, EIA-530, EIA-530A
Date RateASYNC 300, 600bit/s, 1,2; 2,4; 4,8; 7,2; 9,6; 19,2; 38,4 kb/s
SYNC300, 600bit/s, 1,2; 2,4; 4,8; 7,2; 9,6; 19,2; 38,4 kb/s,Nx64kb/s (N=1~32), 4M, 8Mkb/s
Test PatternsPRBS 223-1,220-1, 215-1, 211-1, 29-1,26-1Fixed Code 1111, 0000, 101016-BIT User Programmable Word
LED Alarm Indicators Signal Loss, AIS, Frame Loss, MFrame Loss, Pattern Loss, Remote Alarm, Error, Clock Slip
Error Injection Type: BIT, FAS, CRC4, CODE, E-BITSingle, Fixed Rate, 10-2, 10-3, 10-4, 10-5, 10-6, 10-7
Performance Analysis ITU-T G.821, G826 and M.2100Display 320x240 pixel backlight LCDSerial Port RS-232CRechargeable Batteries 5x1,2V AA NiMH batteries, continuous working for 6 hoursRecharge Time Approx. 2 hoursAC Power Adapter Input: 100V~240VAC, 50/60Hz Output: 12VDC/1,5ATestManager Pro WIN98/ME/NT/2000/XPDimensions LxWxH 200mm x 160mm x 45mmOperating Temperature 0°C~50°CStorage Temperature -20°C~70°CHumidity 5%~95% non-condensing
Ordering InformationDescription Type Article Nr.Transmission Analyzer ECTA101 EC10.000107.101
Standard AccessoriesStandard Items Quantify Standard Items QuantifyTransmission Analyzer 1pc Simulation software 1pc75Ω BNC/L9 E1 test cable 2pcs Carrying case 1pcBNC/BNC cable 1pc User's manual 1pcRS232 serial upgrading cable 1pc Warranty card 1pcDATA converting line (36PIN to 44PIN) 1pc Certificate of conformity 1pcX.21 testing line 1pc V.35 testing line 1pcV2,4 testing line 1pc V.11 testing line 1pc
AC adapter 1pc
120 testing line 2pcs 64K testing lines 1pc
29
www.euroclust.com
Test & Measuring EquipmentCATV Signal Analyzer ECCATVSA1
CATV Signal Analyzer ECCATVSA1
The CATV Signal Analyzer ECCATVSA1 is designed to provide features which are most widely used and favored by professionalsin CATV industry at the least cost. It can be used to measure accurately the Analogue channels, Digital channels efficiently andeffectively with high accuracy rate. Mainly it supports C/N, level, channel power measurement, voltmeter function, spectrumanalysis and so on. Overall, its functions are easy to use and can be used in a wide range of applications.
General Description
Features
Applications- Cable modem analysis using Zero Span mode provides accurate, in-service power and C/N measurements - QAM View option provides complete analysis of digital TV an forward cable modem signals- Find ingress fast with Field View option, Cable technicians working in the field can see the reverse path at the headend - Full, in-service, proof-of-performance analyzer- Fast, sensitive spectrum analyzer - Digital QAM carrier demodulation includes 16, 32, 64, 128 and 256 QAM constellation display with zoom, average digital power
level, bit error rate (BER), and 22 to 39dB modulation error rate (MER)
- Accurate QAM testing: digital average power, MER, BER- Support multiple DVB mode, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM- Single channel/Frequency simulated power levels testing - Video and autdio signal power levels testing - V/A testing. Show the frequency of video and audio, field intensity and powerlevel difference simultaneously - C/N testing, Slope testing- QAM View includes BER, MER, and constellation
Audio Output Built-in speakerPower Supply Li-ion battery (3,7; 2000mAh), 5V AC/DC Adaptor/ChargerOperating Time Average 6~8 hours (Fully charged)Charging Time Less than 5 hoursDimension 223x110x47 (mm)Net weight 0,43kgWorking temperature -10°C ~ +50°CStorage temperature -20°C ~ +60°C
General Specifications
Standard Accessories: Carrying Bag, AC/DC adaptor, USB data cable, Software, Battery.
30
www.euroclust.com
Test & Measuring EquipmentCATV Signal Analyzer ECCATVSA1
CATV Signal Analyzer ECCATVSA1
Specifications
Ordering Information
Description Type Article Nr.CATV Signal Analyzer ECCATVSA1 ECCATVSA1 EC10.000108.101
Channel/Frequency Index Digital ChannelFrequency Range 5MHz ~ 862MHz Modulation mode comply with DVB-C/ITU J83-APrecision 50ppm QAM mode 16/32/64/128/256 QAM
Resolution 10KHz Symbol Rate 1MS/S-7MS/SMeasurement Band width 280KHz Band width set by userFrequency step 50KHz, 100KHz, 500KHz MER 22-29dBChannel type Precision +2dBAnalog TV TV BER 1E-4~1E-9Digital TV 16/32/64/128/256 QAM Carrier-Noise ratio (C/N)Frequency/Channel SIGL Signal input range >70dBuVAnalog power level testing Measuring range 20dB~50dBMeasuring range 25dBuV ~ 120dBuV Precision +2dBPrecision +1,5dB Resolution 0,5dBResolution 0,1dB Spectrum AnalysisDetection Method Peak value detection Frequency Range 5MHz~862MHzInput impedance 75Ω Resolution 100kHzDigital power level testing Precision 50ppmInput range 25dBuV ~ 110dBuV Power levels range 20dBV ~ 120dBVPrecision +1,5dB Power levels resolution 0,1dBResolution 0,1dB Power level precision +1,5dBDetection method Average value detection Dynamic range 60dBInput impedance 75Ω Input impedance 75ΩVoltage testing RBW 300KHzInput range 0 ~ 80V (AC/DC) Testing band width 6, 12, 62MHz, All range scanPrecision +2V Slope testingResolution 0,1V Number of channels 5
Resolution +0,1dBQAM testing function (Q model)
Note: All the above-mentioned technical indexes wholly represent the indoor temperature (25°C)
31
www.euroclust.com
Test & Measuring EquipmentCATV Signal Analyzer ECCATVSA2
CATV Signal Analyzer ECCATVSA2
The CATV Signal Analyzer ECCATVSA2 is designed to provide features which are most widely used and favored by professionalsin CATV industry at the least cost. It can be used to measure accurately the Analogue channels, Digital channels efficiently andeffectively with high accuracy rate. Mainly it supports C/N, level, channel power measurement, voltmeter function, spectrumanalysis and so on. Overall, its functions are easy to use and can be used in a wide range of applications.
General Description
Features
Applications- Cable modem analysis using Zero Span mode provides accurate, in-service power and C/N measurements - QAM View option provides complete analysis of digital TV and forward cable modem signals- Find ingress fast with Field View option, Cable technicians working in the field can see the reverse path at the headend - Full, in-service, proof-of-performance analyzer- Fast, sensitive spectrum analyzer - Digital QAM carrier demodulation includes 16, 32, 64, 128 and 256 QAM constellation display with zoom, average digital power
level, bit error rate (BER), and 22 to 39dB modulation error rate (MER)
- Accurate QAM testing: digital average power, MER, BER- Support multiple DVB mode, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM- Single channel/Frequency simulated power levels testing - Video and autdio signal power levels testing - V/A testing. Show the frequency of video and audio, field intensity and power
level difference simultaneously - C/N testing, Slope testing- QAM View includes BER, MER, and constellation
Audio Output Built-in speakerPower Supply Li-ion battery (3,7V; 2000mAh), 5V AC/DC Adaptor/ChargerOperating Time Average 6~8 hours (Fully charged)Charging Time Less than 5 hoursDimension 223x110x47 (mm)Net weight 0,43kgWorking temperature -10°C ~ +50°CStorage temperature -20°C ~ +60°C
General Specifications
Standard Accessories: ECCATVSA2: 5MHz to 862MHz, with QAM function
32
www.euroclust.com
Test & Measuring EquipmentCATV Signal Analyzer ECCATVSA2
CATV Signal Analyzer ECCATVSA2
Specifications
Ordering Information
Description Type Article Nr.CATV Signal Analyzer ECCATVSA2 ECCATVSA2 EC10.000108.102
Channel/Frequency Index Digital ChannelFrequency Range 5MHz ~ 862MHz Modulation mode comply with DVB-C/ITU J83-AResolution 10KHz QAM mode 16/32/64/128/256 QAM
Measurement Band width 280KHz Symbol Rate 1MS/S-7MS/SFrequency step 50KHz Band width set by userChannel type MER 19-35dBAnalog TV TV BER 1,0E-2~1,0E-8Digital TV 16/32/64/128/256 QAM Carrier-Noise ratio (C/N)Analog power level testing Precision 2dBMeasuring range 25dBuV ~ 120dBuV Resolution 0,1dBPrecision +1,5dB (25°C) Spectrum AnalysisResolution 0,1dB Frequency Range 5MHz~862MHzDetection Method Peak value detection Power levels range 20dBV ~ 120dBVInput impedance 75Ω Testing band width 4, 8, 20, 40MHzDigital power level testing Slope testingInput range 40dBuV ~ 110dBuV Number of channels 8Precision +2,5dB Resolution +0,1dBVoltage testingInput range 0 ~ 100V (AC/DC)Precision +2VResolution 0,1V
Note: All the above-mentioned technical indexes wholly represent the indoor temperature (25°C)
33
www.euroclust.com
Test & Measuring EquipmentADSL2+ Tester ECASLST1
ADSL2+ Tester ECASLST1
ECASLST1 is designed to be an ideal hand-held tool for the installation and maintenance of ADSL/ADSL2+ services. It enables engi-neer to verify the ADSL transmission parameters, proceed PING test, DMM test & trouble-shooting.
General Description
Features
Function- Verification ADSL transmission parameters (up/down actual and max. rates,
attenaution, SNR margin, TX power, and etc.) - Pass/fail indication and programmable threshodls- Graphical bit/tone display - Distance-to-short CRC, HEC, FEC, NCD, OCD bit error statistics- Default 8 groups of VPI and VCI - Modem Emulation (Replace the user's ADSL Modem completely)- PPPoE dial- LAN Ping and WAN Ping- DMM test, including line length test- Uploading test results for analysis and process
- Comply with various ADSL standards, could be used to test ADSL, ADSL2+ and READSL
- Rugged design, potable, 2,8 inch color LCD display- Programmable auto power-off function - User-friendly manual - Up to 99 results storage - Management software available for uploading testing- results via RS232
Standard Package: RJ45-RJ45 cable, RJ11-RJ11 cable, RJ11-crocodile cable, DMM cable, PC software, Manual, Battery,AC/DC adaptor/charger, Silicon Boot.
SpecificationsADSL Tester
Applied StandardsITU G.992.1 (G.dmt), ITU G.992.2 (G.lite), ITU G.994.1 (G.hs), ANSI T1.413 issue #2, ITU G.992.5 (ADSL2+) Annex L Compatible with ADSL, ADSL2+ and READSL
Max. TEsting Distance 6,5 kmChannel Rate Upstream Channel: 0~1,2Mbps; Downstream Channel: 0~1,2MbpsAttenuation 0~63,5dBSNR Margin 0~32dBDMM Tester
VoltageVC: -110V ~ 110V Accuracy: +5%+2V
AC: 0V ~ 290V Accuracy: +5%+2VMeasuring range 0 ~ 20KΩ Accuracy: +3%+2ΩPrecision 0 ~ 1,0MΩ Accuracy: +0,1MΩResolution 1,0~50MΩ Accuracy: +5%+0,5MΩDetection Method 0 ~ 10nF Accuracy: +2nFInput impedance 10 ~ 1000nF Accuracy: +3%+2nFPower Supply AC/DC adaptor; 2000mAH Li-ion Rechargeable BatteryOperating Temperature -30°C + 50°CStorage Temperature -30°C + 60°CHumidity 10% ~ 95%Dimension 201x92x36 (mm)Weight 460 (g)
Ordering Information
Description Type Article Nr.ADSL2+ Tester ECASLST1 EC10.000109.101
34
www.euroclust.com
Test & Measuring EquipmentFiber Microscope ECFM
Fiber Microscope ECFM
Series Fiber Microscope is used to inspect end-face of fibers and check the optic connectivity. It magnifies fibers of 125μm diam-eter 200-400 times, enlarging picture through a video signal to the display where the status of fiber end-face is showed clearlyin the end. Not only portable, easily in-hand, series Fiber Microscope is also multi-functional. It can detect simplex and duplex fiber ends locat-ed in both male and female connectors, as well as other fiber units. Also, working stably is it's another feature. Eliminating theneed to finding solutions for hard-to-reach areas inspection, which can detect connectors even installed on the backside of patchpanels or inside hardware devices, providing you a completely convenience for checking.
General Description
Features
ECFM2 Fiber Microscope- 960x240 definition, 2,5 inch LCD monitor- Image recording, timing display- Two channels for image signal input CH1/CH2, manually switching- Sensitive microphone installed for sound recording - Functions of key-locked, stand-by and recording - Storage (128MB internal memory, SD card optional provided), 16G
support- Mobile disk optional provided- Can upload files of music and video or orther kinds through USB 2,0- Earphone interface, sound output support - Battery safe and high volume, >9 hours continuous working time,
7 hours continuous recording time- Dual version for interface (Egllish/Chinese)
ECFM1 Fiber Microscope- 960x240 definition, 3,5 inch LCD monitor- Power run-out alarm- Magnetic attachment to equipment - Battery safe and high volume, >5 hours continuous working time - 0,3 mm x 0,3 mm Observable Areas, 2mm x 2mm Adjustable Areas
SpecificationsModel ECFM1 ECFM2Image zoom 200x 200xDisplay screen 3,5'' TFT 2,5'' TFTAV output PAL/NTSCResolution 0,75μmVideo N/A YesAudio N/A YesMultiple in display N/A 5 levels enlarge multiple (each level 1,2 times)Power supply Li-ion battery 2200mAh&AC/DC adaptor Li-ion battery 1800x2mAh&AC/DC adaptorData storage N/A 2G SD cardConnect to PC Optional YesConnect to TV N/A YesUSB interface Optional YesNumber of Channels 1CH 2CHBacklight Yes YesBattery life >5 Hours >9 HoursStorage Temp. -10°C - 40°CWorking Temp. -20°C - 60°CDimension 240mm x 100mm x 35mm 160mm x 100mm x 40mmNet weight 580g 560g
35
www.euroclust.com
Test & Measuring EquipmentFiber Microscope ECFM
Fiber Microscope ECFM
Ordering Information
Description Type Article Nr.Fiber Microscope ECFM1 ECFM1 EC10.000010.051Fiber Microscope ECFM2 ECFM2 EC10.000010.052ST-F ECMIACC10 EC10.000010.053LC Adaptor ECMIACC11 EC10.000010.054E2000-F ECMIACC12 EC10.000010.055SC-F-APC FC-F-APC ECMIACC13 EC10.000010.0561,25-M/PC ECMIACC14 EC10.000010.0572,5-APC ECMIACC15 EC10.000010.058USB function related ECMIACC16 EC10.000010.059
ECFM1 ECFM2NO Name Quantify NO Name Quantify1 ECFM1 probe 1pc 1 ECFM2 probe 1pc2 3,5' inch Display 1pc 2 2,5' inch Display 1pc3 LC-F, SC/FC-F 1pc 3 DC 5V 2A Adaptor 1pc4 2,5mm PC Male Tip 1pc 4 User manual 1pc5 Lithium Battery 1pc 5 Lithium Battery 1pc6 DC 12V 2A Adaptor 1pc 6 DC 5V 2A Adaptor 1pc7 User manual 1pc 7 2GB SD card 1pc8 Bag 1pc 8 Earphone 1pc
9 Lithium Battery 1800mAh 2pcs10 Shock-proof sheath 1pc11 FC/SC-F LC/MU-F 2,5-M/PC 1pc
Standard Accessories
ECFM1 ECFM2NO Name Quantify NO Name Quantify1 ST-F 1pc 1 ST-F 1pc2 LC Adaptor 1pc 2 LC Adaptor 1pc3 E2000-F 1pc 3 E2000-F 1pc4 SC-F-APC FC-F-APC 1pc 4 SC-F-APC FC-F-APC 1pc5 1,25-M/PC 1pc 5 1,25-M/PC 1pc6 2,5-APC 1pc 6 2,5-APC 1pc7 USB function related 1pc
Optional Accessories
36
www.euroclust.com
Test & Measuring EquipmentBench-top Return/Insertion Loss Tester
Bench-top Return/Insertion Loss Tester
The ECBTRILT1 bench-top optical insertion loss/return loss test station is a multi-functional device for optic fiber network, andcable manufacturer to verify the quality of fiber leads. It's designed to be a combination of optical insertion loss tester, opticalpower meter, laser source and relative power value, but also work as a self-testing system to measure optical loss of optic fibercable and passive device.
General Description
Technical parameters
Standard Accessories: User manual, Interchangeable FC/SC/ST connec-tors, AC/DC Adapter, PC software CD, USB Cable, Test report, FC/APC-FC/APC Patchcord, FC/APC-FC/PC Patchcord, Cotton Bud, Foot PedalSwitch
Ordering Information
Description Type Article Nr.Bench-top Return/Insertion Loss Tester ECBTRILT1 EC10.000114.101
- High accuracy at 2 wavelengths (SM 1310/1550NM)- Three instruments in one: return loss meter/power meter/insertion loss
meter- USB port available for data upload to PC
Features
Return loss meter Insert loss meterWorking wavelength 1310nm/1550nm Calibrated wavelengths 1310, 1550nmMeasurement range 0 ~ +75 dB Measurement range 0-70dB
Calibrated wavelengths 1310nm & 1550nm Measurement accuracy 0-60dB: 0,2dB, 60-70dB: 1dBStability 0,05dB/15min Connector type set by userConnector type FC/APC.SC/APC.ST/APC Other specificaionsResolution 0,1/0,01/dB (selectable) Power Supply AC100 240V, 50/60HzPower Output -2dBm Data Storage Upload to PC via USB cable
Power meter Working temperature -5 +50°C
Calibrated wavelengths 850nm, 1300nm, 1310nm,1490nm, 1550nm, 1625nm
Storage temperature -20 +70°CWorking humidity 0-90% no condesing
Measurement range -80dBm +10 dBm Dimension 260 x 110 x 310mmMeasurement accuracy 5% + 1nW Weight 3KgModulation detection YesConnector type FC/SC/ST
37
www.euroclust.com
Test & Measuring EquipmentMultichannel Loss Analysis Meter ECMLAM1
Multichannel Loss Analysis Meter ECMLAM1
The ECMLAM1 Multichannel passive device loss analysis meter is used to analyze multi-channel loss of passive optical devices,which can quickly get the insertion loss of PCL. The performance of the device is steady and is composed of DFB laser source,power meter and insertion loss/return loss.- As the laser source, it can output the 1310nm, 1490nm and 1550nm,- As the power meter, it can test the 850nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm wavelength,- As the IL and RL meter, it can measure RL of the 1310nm, 1490nm and 1550nm,Especially for the 1 x N passive device, such as AWG and Splitter.
General Description
Technical parameters
Standard Accessories: Power line, USB line, CD, certificaion,packing carton, packing list, testing report.
Ordering Information
Description Type Article Nr.Multichannel Loss Analysis Meter ECMLAM1 EC10.000115.101
- Measure the 1 x N passive device, such as AWG and Splitter- High test rate- High-precision measurement of insertion loss- Flexible module expansion
Features
Parameters of power meterCalibration wavelength 850nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nmMeasurement range -60dBm ~ 10dBmUncertainty -60dBm ~ 10dBm: +0,35dBDisplay accuracy 0,01Parameters of laser sourceOptional wavelength 1310nm, 1490nm, 1550nmOutput power >-5dBm+0,5dBmStability 0,05dB/15minOther parametersPower AC100~240v 50/60 HzUSB YesWorking temperature 0°C ~ +40°CStorage temperature -20°C ~ +70°C
38
www.euroclust.com
Test & Measuring EquipmentErbium Doped Fiber Ampliffer ECDFA1
Erbium Doped Fiber Ampliffer ECDFA1
- SDH/PDH Transmission Systems- Backbone Network, Metro Networks and Access Networks- Single Channel Optical Transmission System
Application
Technical parameters
Note: *At 1550nm, 0dBm input power
Ordering Information
Description Type Article Nr.Erbium Doped Fiber Ampliffer ECDFA1 EC10.000116.101
Parameters Min. Typ. Max.Operation Wavelength (nm) 1530 1550 1560Input Optical Power (dBm) -6,0 ~ +3,0Output Optical Power (dBm) +13dBm to +22dBmOutput Power Stability (dB) < +0,3dBNoise Figure* (dB) < +5,0Polarization Sensitivity (dB) < +0,3dBInput/Output Isolation (dB) >30Input/Output Return Loss (dB) >45Input/Output Interface FC/APC or Customer SpecifiedOperating Temperature 0°C ~ +60°CStorage Temperature -20°C ~ +70°CDimension (mm) 434W x 260D x 44HInstallation Standard 19'' 1U Rack Mounted
- High Output Power with Low Noise Figure- High Stability- RS232 Monitoring Interface Available- Standard 19'' 1U size, easy installation and maintanance
Features
39
www.euroclust.com
Test & Measuring EquipmentMulti-channel Optical Power Detector ECMCHOPD1
Multi-channel Optical Power Detector ECMCHOPD1
The ECMCHOPD1 multichannel optical power detector is used in the multipath continuous optical signal measuring. This meteris designed to be ingenious, having complete function, stable performance and easy to use. It is especially for optical power realtime testing of fiber line, optical power collection of multi-path auto testing system and etc.
General Description
Technical parameters
Standard Accessories: Fast instruction, certification, testingreport, 220V power line, packing carton, packing list
Ordering Information
Description Type Article Nr.Multi-channel Optical Power Detector ECMCHOPD1 EC10.000117.101
- Multi-path circular real time monitoring- Each path can set upper and lower limit warning- RS232, RS485 two types of communication output ports- LCD display, low power consumption
Applications
Working wavelength range 850nm ~ 1700nmMeasuring range -60dBm ~ +7dBmUncertainty < +0,5dBDisplay precision 0,01Calibration wavelength 1550nmElectric signal transformation consuming time <25ms (adjacent channel)0,05dB/15minType of optical output/input port FCPower supply AC100~240v 50/60 HzCommunication interface RS232, RS485Working temperature 0°C ~ +40°CStorage temperature -20°C ~ +70°C
40