Visual Resume, SlideShare resume, CV, Curriculum Vitae, resume, resume service, resume writer
Terry's cv resume
3
Terry Taylor 1050 30st, Ogden UT 84403 Phone: 385-205-9326 E-mail: [email protected] Consultant/Rig Manager Date: 12/23/2015 This is my current Cv/Resume. Regards Terry Taylor 2014-2015: Nabors International Country KSA, Saudi Arabia; Position Held; Rig Manager Job Description: As Rig Manager I was responsible for efficiently and proficiently maintaining and managing state of the art drilling rig. I maintained accuracy of Morning reports and safety meetings. Scheduled maintenance, scheduled training for Rig Crews. Maintained rig to stay on daily game plan for Saudi Aramco drilling Exploratory wells to 25000’. 2011-May 2014: Frontier Drilling; Country: U.S.A West Virginia, Position Held Rig Manager vertical Wells Drilled wells to TVD of 18,000’ in the Marcellus Job Description: Multi Well pads –Drilled horizontally to kick off point, to 6500; land the curve, Drill 15000’ to18000’ ft vertical following the formation using clean up cycles every 250’ to 500’ to keep hole clean properly. TD well short trip to top of curve go back in circulate hole clean. 2010 - 2011: SST Energy Country: U.S.A. Wyoming; Wells Drilled: Position Held: Driller/RP Horizontal gas wells into the nugget formation Job Description: Drilled 13000’to15400’ Pumped sweeps and ran surveys every 500’.Ran rig and trained personal. Maintained and serviced rig equipment kept up on rig crew certifications held daily safety meetings as needed and was relief pusher when needed 2008-2010; Cyclone Drilling Country: U.S.A North Dakota, Position Held: Driller Job Description: Ran rig coordinated all phases of operational activities with rig crew overseeing casing and cement operations. Directional drilling and rig move operations. Other duties involved company compliance, Task management, kept rig inventory for parts and tools chemicals 2005-2008; Grew Wolf Drilling Country: U.S.A Wyoming and Colorado Position Held: Driller, Drilled: Horizontal gas wells. Job Description: Drilled to kick off point land the curve usually using a 1.5 to 2 deg fixed motor, Drilled to 3000’ to 5000’ horizontally following the formation using clean up cycles every 1000’ to TD of curve. Drilled curve at around 600’ to 900’ then vertical to well TD around 13,800’ cleaned hole ran casing. . Professional Qualifications IADC well control certificate with stack qualification SAFELAND Omron Technical Training certificate Fall Protection
-
Upload
terry-taylor -
Category
Recruiting & HR
-
view
128 -
download
0
Transcript of Terry's cv resume
Terry Taylor 1050 30st, Ogden UT 84403
Phone: 385-205-9326 E-mail: [email protected]
Consultant/Rig Manager Date: 12/23/2015 This is my current Cv/Resume.
Regards Terry Taylor
2014-2015: Nabors InternationalCountry KSA, Saudi Arabia;Position Held; Rig Manager
Job Description: As Rig Manager I was responsible for efficiently and proficiently maintaining and managing state of the art drilling rig. I maintained accuracy of Morning reports and safety meetings. Scheduled maintenance, scheduled training for Rig Crews. Maintained rig to stay on daily game plan for Saudi Aramco drilling Exploratory wells to 25000’.
2011-May 2014: Frontier Drilling; Country: U.S.A West Virginia, Position Held Rig Manager vertical Wells Drilled wells to TVD of 18,000’ in the Marcellus
Job Description: Multi Well pads –Drilled horizontally to kick off point, to 6500; land the curve, Drill 15000’ to18000’ ft vertical following the formation using clean up cycles every 250’ to 500’ to keep hole clean properly. TD well short trip to top of curve go back in circulate hole clean.
2010 - 2011: SST EnergyCountry: U.S.A. Wyoming;
Wells Drilled: Position Held: Driller/RP Horizontal gas wells into the nugget formationJob Description: Drilled 13000’to15400’ Pumped sweeps and ran surveys every 500’.Ran rig and trained
personal. Maintained and serviced rig equipment kept up on rig crew certifications held daily safety meetings as needed and was relief pusher when needed
2008-2010; Cyclone DrillingCountry: U.S.A North Dakota,
Position Held: DrillerJob Description: Ran rig coordinated all phases of operational activities with rig crew overseeing casing and cement operations. Directional drilling and rig move operations. Other duties involved company compliance, Task management, kept rig inventory for parts and tools chemicals
2005-2008; Grew Wolf DrillingCountry: U.S.A Wyoming and Colorado
Position Held: Driller,Drilled: Horizontal gas wells.
Job Description: Drilled to kick off point land the curve usually using a 1.5 to 2 deg fixed motor, Drilled to 3000’ to 5000’ horizontally following the formation using clean up cycles every 1000’ to TD of curve. Drilled
curve at around 600’ to 900’ then vertical to well TD around 13,800’ cleaned hole ran casing. . Professional Qualifications
IADC well control certificate with stack qualificationSAFELAND
Omron Technical Training certificateFall Protection
LO/ TOHarassment prevention
Heat Stress/ Cold WeatherH2S Training
Five First Aid CoursesTesco Top Drive Training Program
Can Rig Top Drive Training, Forklift Operator Safety Training
I have 30 years, experience in the Oil and Gas, Geothermal, Water, Drilling and Production Industry. I am resourceful, detailed, and highly motivated love learning on a daily basis, while obtaining an excellent ability to work with multinational personnel in the safest manner possible. I am Resourceful, Motivated, and Detailed. I have good management, skills. I work well under pressure. I like challenges, and have Perfect safety record.
Wendy Safety Coordinator at Frontier Drilling; I monitored safety on Terry’s rig at Frontier Drilling which was the pride of the fleet the two years he was rig manager at Frontier Drilling, Terry is very safety oriented and pays attention to Details and is good at problem solving.
Morris Rambo Consultant Drilling & CompletionsTERRY WAS ONE OF THE BEST TOOL PUSHERS (RIG MGR) THAT I HAVE HAD THE PLEASURE TO WORK WITH HE RUNS HE A FIRST CLASS DRILLING OPERATION HIS RIG WAS ALWAYS IN TIP TOP SHAPE AND VERY SAFE FOR ALL HANDS. TERRY CAN WORK FOR ME ANY TIME AND OTHE THAN THAT A REAL FIRST CLASS GENTLEMAN...MORRIS RAMBO
. Keith Tony; Safety hand & Directional driller; Ref: Terry Taylor
To Whom It May Concern; I am writing this letter of recommendation for Terry Taylor, I would like to introduce to you his enthusiasm for the oilfield industry, his ability to excel, along with strong interpersonal and communication skills, and talent for training safe, efficient and effective teams. I believe Terry Taylor ,would make a valuable asset to any drilling program he has shown an excellent way to promote safety as well as increase moral with all hands on job.
References; Wendy; [email protected] Murrell; Antero Resources; Superintendent-Phone 903-256-6040Lance faucet; Consultant- [email protected] Morris Rambo; Consultant-501-733-4991 Many more References if needed.
