terrace awnings balcony awnings side screen - ripo.lvdes žalūzijas/Markīzes... · Flyer plate...

terrace awningsbalcony awningsside screen

4th edition EN

TABLE OF CONTENTSCasablanca ........................................................................Corsica ...............................................................................Giant ...................................................................................Malta ...................................................................................Silver Plus ...........................................................................Australia ..............................................................................Jamaica ..............................................................................Palladio ...............................................................................Dakar ..................................................................................Italia .....................................................................................Balcony Italia .......................................................................Box Italia ..............................................................................Bora ....................................................................................

481216202428343842465054

Casablancaterrace awning

CASSETTE yes

ROLLER TUBE 78 mm diameter

MOUNTING wall, ceiling, roof

PROJECTION 1.6 m; 2.1 m; 2.6 m; 3.1 m; 3.6 m

MAXIMUMPROJECTION

3.6 m

MAXIMUMWIDTH

6.0 m

MINIMUMWIDTH

projection + 0.4 m

ARMS folding, aluminum, with springs and plate Flyer’s chain,folded arm levelling

TILT ANGLE 5° ~ 40°

CONSTRUCTIONCOLOUR

powder coating: white, beige, brown, structural graphite,silver

FABRIC over 150 patterns

MANUALOPERATION

crank: 1.5 m; 1.8 m; 2.2 m

AUTOMATICDRIVE

motor, motor with manual override, remote control,wind-sun weather control, motor with electroniclimit switches is recommended

OVERLAPPINGARMS

no

VALANCE no

TELESCOPICSUPPORT

no

Casablanca is a cassette awning perfect for large terraces. Thanks to its built this awning is not only a perfect way of protecting from the sun, but also an aesthetic decorative part of the building. Specially designed construction from extruded aluminium ensures strength and durability of the awning, and Flyer’s chain used in the arms guarantees its long-term dependable operation. Wide awnings are equipped with roller tube support to ensure that the fabric is evenly tightened. Special gaskets placed in the cassette further protect the fabric from weather conditions. What is more, properly selected electric control with weather sensors will make handling the Casablanca awning very easy and functional.

Casablancaterrace awning

construction colours

fabric

For powder coating Selt company uses paints provided by renowned Swiss company - IGP. Using the IGP-DURA®Clean powders gives us a coating characterized by a surface that is resi-stant to dirt and easy to maintain.

Crank and gearbox are available in following colours: RAL 9010, RAL 1013, RAL 8017, RAL 7035, RAL 7016.

All of the acrylic fabrics are impregnated using the protective agents TEFLON or SCOTCHGARD. They provide excellent protection and strengthen the fabric’s resistance to water and dirt. It is important to remember that condi-tions such as acid rain, organic matter contamination and cleaning the fabric with abrasive chemicals may destroy the protective surface of the fabric.

RAL 9010 RAL 1015 RAL 8014 RAL 9006

LOWICK

71319

6 Colours of the powder lacquered and PVC elements were chosen to achieve the best compatibility with the RAL colour palette. For technical reasons, differences in colour shade are permissible, therefore they cannot constitute grounds for complaints.

construction

mounting

Construction is made from extruded aluminium. Aluminium arms are placed on brackets made by pressure casting, which ensures durability and stability of the construction.

24141

2

202

325426300

24141

2

202

325426300

24141

2

202

325426300

1.6

2.1

2.6

3.6

3.1

1.6

2.1

Tilt angle adjustment

Mounting on the wallMounting on the ceiling

automationWe offer such solutions from leading European manufacturers as: full wind and sun automation, motors with wireless or wire control and cranks.

Mounting on the rafters

7The producer reserves the right to introduce construction changes. The tolerance of external dimensions of the awning is ± 2cm.

Corsicaterrace awning

CASSETTE yes



PROJECTION 1.6 m; 2.1 m; 2.6 m; 3.1m; 3.6 m

MAXIMUMPROJECTION

3.6 m

MAXIMUMWIDTH

7.0 m

MINIMUMWIDTH

projection + 0.5 m




MANUALOPERATION

no

AUTOMATICDRIVE

motor, motor with manual override, remote control,wind-sun weather control, motor with electroniclimit switches is recommended

VALANCE no

TELESCOPICSUPPORT

no

CONSTRUCTIONCOLOUR

powder coating: white, beige, brown, structural graphite,silver

OVERLAPPINGARMS

no

Corsica is an awning designed with the idea of shading modern terraces in mind. Its construction is made from extruded aluminium, which ensures strength and durability of the awning, and Flyer’s chain used in the arms in connection with precisely made joints guarantees its long-term dependable operation. The cassette is supported by square bar providing stability for the whole construction while making the installation easier. Corsica was designed to provide the possibility of installing LED lighting which allows the user to fully enjoy pleasant summer evenings. This awning, thanks to its aesthetically pleasing design can, apart from shading from the sun, serve as a perfect decorative element of the building, highlighting its individual and unique character.

Corsicaterrace awning


fabric

For powder coating Selt company uses paints provided by renowned Swi company - IGP. Using the IGP-DURA®Clean powders gives us a coating characterized by a surface that is resistant to dirt and easy to maintain.

All of the acrylic fabrics are impregnated using the protective agents TEFLON or SCOTCHGARD. They provide excellent protection and strengthen the fabric’s resistance to water and dirt. It is important to remember that condi-tions such as acid rain, organic matter contamination and cleaning the fabric with abrasive chemicals may destroy the protective surface of the fabric.

LOWICK

RAL 9010 RAL 1015 RAL 8014 RAL 900671319



mounting1.

6

2.1

2.6

3.1

3.6

1.6

2.1

35

240

235

446

262

262361

240

235

446

262

262361

240

235

446

262

262361Mounting on the wallMounting on the ceilingMounting on the rafters

constructionConstruction is made from extruded aluminium, ensuring durability of the product. Awning cassette is supported by a square bar, which not only protects the fabric, but also provides for easy installation. Special ratcheting mechanism in the arm brackets ensures a perfect closure of the front bar to the cassette.



CASSETTE no


MOUNTING wall

PROJECTION 4.0 m; 4.5 m; 5.0 m;

MAXIMUMPROJECTION

5.0 m

MAXIMUMWIDTH

6.5 m

MINIMUMWIDTH

projection + 0.5 m

ARMS folding, aluminum, with springs and plate Flyer’s chain

TILT ANGLE 5°~30°

OPTIONAL HOOD yes

CONSTRUCTIONCOLOUR

powder coating: white, structural graphite


VALANCE standard height 21cm (± 0,5 cm), maximum height40 cm for C and D shapes, 100 cm for E shape

AUTOMATICDRIVE

motor, wind-sun weather control

OVERLAPPINGARMS

no

TELESCOPICSUPPORT

yes

Giantterrace awning

Giant thanks to its very solid construction makes for a perfect way of shading large surface areas, like terraces or open-air restaurants, becoming a great alternative to the more permanent roofing systems. Construction is made from extruded aluminium and supported by double square bar. Aluminium arms with forged components make it possible to achieve even 5m projection. Flyer’s chain used in the arms guarantees long-term dependable operation of the awning. The possibility of using aluminium hood allows to partially protect the rolled-up fabric from weather conditions. Properly selected electric control along with weather sensors will make handling the Giant comfortable and easy.

Giantterrace awning

valance


There are three valance shapes available in our offer: C,D, & E (see pictures below). Standard valance height is 21 cm. The valance is aesthetically finished with binding trim.For PLAIN fabrics, the only available valance type is E.

For powder coating Selt company uses paints provi-ded by renowned Swi company - IGP. Using the IGP-DURA®Clean powders gives us a coating characte-rized by a surface that is resistant to dirt and easy to maintain.


RAL 9010

fabricAll of the acrylic fabrics are impregnated using the protective agents TEFLON or SCOTCHGARD. They provide excellent protection and strengthen the fabric’s resistance to water and dirt. It is important to remember that condi-tions such as acid rain, organic matter contamination and cleaning the fabric with abrasive chemicals may destroy the protective surface of the fabric.

LOWICK

71319


constructionConstruction is made from extruded aluminium and supported by double square bar. That in connection with aluminium strengthened arms not only ensures durability of the system, but also gives possibility of reaching large projections.


mounting

4.0

5.0

4.5

2.35

2.6

2.85

30

372

349

Mounting on the wall



16

CASSETTE no


MOUNTING wall, ceiling

PROJECTION 1.6 m; 2.1 m; 2.6 m; 3.1 m

MAXIMUM PROJECTION

3.1 m

MAXIMUM WIDTH

5.0 m

MINIMUM WIDTH

projection + 0.3 m

ARMS folding, aluminum, with springs and plate Flyer’s chain

TILT ANGLE 5°~70° (mounting on the wall)5°~85° (mounting to ceiling)

OPTIONAL HOOD no

CONSTRUCTION COLOUR

powder coating: white, beige, brown, structural graphite, silver


VALANCE standard height 21cm (± 0,5 cm), maximum height 40 cm for C and D shapes, 100 cm for E shape

MANUAL OPERATION

crank: 1.5 m; 1.8 m; 2.2 m

AUTOMATICDRIVE

motor, motor with manual override, remote control, wind-sun weather control

OVERLAPPING ARMS

no

Maltaterrace awning

TELESCOPIC SUPPORT

yes

17

Malta is a light, free-hanging awning, perfect for shading smaller terraces or balconies. Its compact construction features a universal ceiling and wall bracket, which enables fast and simple assembly and also allows for setting a tilt angle up to 85 degrees. Flyer plate link chain used in the articulated joints makes them durable and reliable. The construction is powder coated in white, beige, brown, structural graphite or silver.


valance


fabric

There are three valance shapes available in our offer: C, D & E (see pictures below).Standard valance height is 21 cm. The valance is aesthetically finished with binding trim. For PLAIN fabrics, the only available valance type is E.

For powder coating Selt company uses paints provided by renowned Swiss company - IGP. Using the IGP-DURA®Clean powders gives us a coating characterized by a surface that is resistant to dirt and easy to maintain.


All of the acrylic fabrics are impregnated using the protective agents TEFLON or SCOTCHGARD. They provide excellent protection and strengthen the fabric’s resistance to water and dirt. It is important to remember that conditions such as acid rain, organic matter contamination and cleaning the fabric with abrasive chemicals may destroy the protective surface of the fabric.

LOWICK

Maltaterrace awning

RAL 9010 RAL 1015 RAL 8014 71319 RAL 9006



construction

mounting

Light and solid brackets forged from aluminium ensure durability and relatively low weight of the construction. Universal bracket provides two options of assembly, either to the wall or ceiling.

1.6

1.6

2.1

2.6

3.1

2.1

2.6

3.1

85


Mounting on the wallMounting to the ceiling

20

terrace awning

SilverP l u s

CASSETTE no

ROLLER TUBE 70 mm and 78 mm diameter


PROJECTION 1.6 m; 1.9 m; 2.2 m; 2.5 m

MAXIMUM PROJECTION

2.5 m

MAXIMUM WIDTH

5.3 m

MINIMUM WIDTH

projection + 0.4 m

ARMS folding, aluminum, with springs and plate Flyer’s chain; in case of overlapping arms minimum width = projection - 0.4m


OPTIONAL HOOD yes

CONSTRUCTION COLOUR

powder coating: white



MANUAL OPERATION

crank: 1.5 m; 1.8 m; 2.2 m

AUTOMATICDRIVE


OVERLAPPINGARMS

yes

TELESCOPIC SUPPORT

yes

21

Silver Plus has a light construction, which makes it a very economic solution for shading terraces and balconies of medium size. Folding arms of special aluminium alloy are installed on brackets made by machines using numerical control. A plate link chain applied to the articulated joints makes them strong and durable. A solid steel square bar supports the construction. This solution gives relative freedom of bracket location and simplifies the awning installation. An optional aluminium hood protects the rolled-up fabric and enhances the aesthetic look of the whole awning. Construction elements are powder lacquered in white colour. There is the possibility to use overlapping arms in this awning.


valance


fabric




LOWICK

RAL 9010

terrace awning

SilverP l u s


Tilt angle adjustmentOverlapping arms

0

0

1.6

1.9

2.2

2.5

1.6

1.9

construction

mounting

Square construction beam provides relative freedom of bracket placement. Using aluminium hood ensures protection for the fabric from adverse weather conditions.

Mounting on the wallMounting on the ceiling Mounting on the walloption with hood

Mounting on the rafters


24

terrace awning

AustraliaCASSETTE no




MAXIMUM PROJECTION

3.6 m

MAXIMUM WIDTH

7.0 m

MINIMUM WIDTH

projection + 0.35 m

ARMS folding, aluminum, with springs and plate Flyer’s chain, folded arm levelling, in case of overlapping arms minimum width = projection - 0.4 m


OPTIONAL HOOD no

CONSTRUCTION COLOUR




MANUAL OPERATION

crank: 1.5 m; 1.8 m; 2.2 m

AUTOMATICDRIVE


OVERLAPPING ARMS

yes

TELESCOPIC SUPPORT

yes

25

Australia is perfect for big terraces. Simple construction and high-quality workmanship make it suitable for commercial applications. The awning’s folding arms are installed on aluminium brackets made through pressure casting. The precise manufacture of the articulated joints, as well as the plate link chain applied in them, provide durability and dependable operation of the awning. A central support for the roller tube in the case of particularly wide awnings compensates for tube deflection, thus providing good fabric tension. The construction is supported by a square steel beam that gives relative freedom of bracket location and simplifies the awning installation. The construction is powder coated in white, beige, brown, structural graphite or silver. It is possible to use over-lapping arms.

Australia


RAL 9010 RAL 1015 RAL 8014 71319 RAL 9006

valance


fabric

There are three valance shapes available in our offer: C, D & E (see pictures below).Standard valance height is 21cm. The valance is aesthetically finished with binding trim. For PLAIN fabrics, the only available valance type is E.




LOWICK

terrace awning

Australia


constructionSquare construction beam provides relative freedom of bracket placement. Brackets made from pressure cast and extruded aluminium provide high durability with relatively low weight.

Mounting on the wallMounting on the ceilingMounting on the rafters


1.6

2.1

2.6

3.1

3.6

1.6

2.1

2.6

3.1

Overlapping arms

mounting


28

terrace awning

JamaicaCASSETTE no



PROJECTION 1.6 m; 2.1 m; 2.6 m; 3.1 m; 3.6 m; 4.1 m

MAXIMUM PROJECTION

4.1 m

MAXIMUM WIDTH

7.0 m (maximum width for projection 4.1 m is 6.0 m)

MINIMUM WIDTH

projection + 0.5 m



OPTIONAL HOOD yes

CONSTRUCTION COLOUR




ROLL-UP VALANCE yes

MANUAL OPERATION

crank: 1.5 m; 1.8 m; 2.2 m

AUTOMATICDRIVE


OVERLAPPING ARMS

yes

TELESCOPIC SUPPORT

yes

29

Jamaica combines elegance and strength. Its construction provides high durability under intensive use. It is therefore the perfect choice for big terraces and for commercial applications. The awning’s folding arms are installed on special-construction aluminium brackets, made by machines using numerical control. A plate link chain used in the arms and precisely made articulated joints provide long-term dependable operation of the awning. A central support for the roller tube in big awnings ensures even tension of the fabric. The construction is supported with a square steel beam that gives relative freedom of bracket location and simplifies the awning installation. An optional aluminium hood protects the rolled-up fabric. The construction is powder coated in white, beige, brown, structural graphite or silver. It is possible to use overlapping arms.

Jamaica


RAL 9010 RAL 1015 RAL 8014 71319 RAL 9006

valance


fabric





LOWICK

terrace awning

Jamaica


construction

mounting

Brackets are made of extruded aluminium with machines using CNC, which allows us to use arms with a 4.1m projection. An optional hood provides protection for the fabric from adverse weather conditions.

1.6

2.1

2.6

3.1

3.6

4.1

1.6

2.1

2.6

3.1


Mounting on the wallMounting on the walloption with hood

Mounting on the ceilingMounting on the rafters

Overlapping arms



terrace awning

Jamaica

valanceIt is possible to use roll-up valance with additional standard valance.



Volant – roll-up valanceThe roll-up valance is available only for Jamaica awning.Technical information for Volant: - maximum width 6.0 m, - maximum awning projection with Volant: 3.1 m, - maximum height (length) 1.5 m for SOLTIS and SUNTECH fabrics - maximum height (length) 1.2 m for Acrylic fabrics - available shape: type E (see picture below), - manual operation.

34

terrace awning

PalladioCASSETTE yes




MAXIMUM PROJECTION

3.6 m

MAXIMUM WIDTH

7.0 m

MINIMUM WIDTH

projection + 0.5 m



CONSTRUCTION COLOUR




MANUAL OPERATION

crank: 1.5 m; 1.8 m; 2.2 m

AUTOMATICDRIVE

motor, motor with manual override, remote control, wind-sun weather control, motor with electronic limit switches is recommended

OVERLAPPING ARMS

yes, for projections: 1.6 m; 2.1 m; 2.6 m; 3.1 m

TELESCOPIC SUPPORT

yes

35

Palladio is an elegant cassette awning that looks excellent on terraces. The special arm bracket construction enables lifting the arms and closing the front bar tightly on the cassette, thus covering the rolled-up fabric. A plate link chain applied in the arms and precisely made articulated joints guarantee long-term dependable operation of the awning. Elastic supports for the roller tube ensure even tension of the fabric. Palladio combines the characteristics of a cassette awning and a square beam-based construction. Such solution allows us to fully take advantage of cassette awning functionality and simplifies its installation. The construction is powder coated in white, beige, brown, structural graphite or silver. It is possible to use overlapping arms.


RAL 9010 RAL 1015 RAL 8014 71319 RAL 9006

valance


fabric

There are three valance shapes available in our offer: C,D, & E (see pictures below).Standard valance height is 21 cm. The valance is aesthetically finished with binding trim. For PLAIN fabrics, the only available valance type is E.

For powder coating Selt company uses paints provided by renowned Swi company - IGP. Using the IGP-DURA®Clean powders gives us a coating characterized by a surface that is resistant to dirt and easy to maintain.



LOWICK

terrace awning

Palladio


construction

mounting

Using a cassette made of extruded aluminium, supported on a square construction beam, provides perfect protection for the fabric and makes installation easy. A special ratchet mechanism in arms’ brackets ensures complete closing of the front bar to the cassette.

1.6

2.1

2.6

3.1

3.6

1.6

2.1

2.6


Mounting on the wallMounting on the ceilingMounting on the rafters


Overlapping arms

38

terrace awning

DakarCASSETTE yes




MAXIMUM PROJECTION

3.6 m

MAXIMUM WIDTH

6.0 m

MINIMUM WIDTH

projection + 0.4 m



CONSTRUCTION COLOUR




MANUAL OPERATION

crank: 1.5 m; 1.8 m; 2.2 m

AUTOMATICDRIVE

motor, motor with manual override, remote control, wind-sun weather control, motor with electronic limit switches is recommended

OVERLAPPING ARMS

no

TELESCOPIC SUPPORT

yes

39

Dakar is the perfect solution for shading large terraces. A full streamlined cassette gives the awning a modern and elegant look and also protects the fabric and arms from weather conditions. To increase the protection of the fabric safety gaskets are applied inside the cassette. Folding arms made of aluminium alloy are mounted with aluminium brackets made through pressure casting. Precise joints with a plate link chain of stainless steel guarantee their durability and reliable operation. Awnings with a larger width are equipped with a support for the roller tube, thanks to which the fabric is stretched more uniformly.The construction is powder coated in white, beige, brown, structural graphite or silver.


RAL 9010 RAL 1015 RAL 8014 71319 RAL 9006

valance


fabric

There are three valance shapes available in our offer: C,D, & E (see pictures below).Standard valance height is 21 cm. The valance is aesthetically finished with binding trim. For PLAIN fabrics, the only available valance type is E.




LOWICK

terrace awning

Dakar


construction

mounting

A full cassette made of extruded aluminium provides perfect protection for the fabric, as well as lightness and durability of the construction.

1.6

2.1

2.6

3.6

3.1

1.6

2.1

2.6

3.6

3.1

1.6

2.1


Mounting on the rafters Mounting on the wallMounting on the ceiling


42

balcony awning

ItaliaCASSETTE no



PROJECTION 1.0 m; 1.4 m; 1.8 m

MAXIMUM PROJECTION

1.8 m

MAXIMUM WIDTH

5.0 m

ARMS drop arms, aluminum, with spring

OPTIONAL HOOD no

CONSTRUCTION COLOUR




MANUAL OPERATION

crank: 1.5 m; 1.8 m; 2.2 m

AUTOMATICDRIVE


43

Italia is a window and balcony awning for shading and protection of window niches, shop windows, balconies, terraces and verandas. Aluminium drop arms are equipped with a spring which tensions the fabric and prevents the arms from folding under wind pressure. The awning’s weight is distributed between the arms and roller tube brackets. Thus ITALIA can be installed even in places where the strength of mounting surface excludes use of a terrace awning with folding arms. The light construction makes awning installation very easy. Construction elements are powder lacquered in white colour.


valanceThere are three valance shapes available in our offer: C,D, & E (see pictures below).Standard valance height is 21 cm. The valance is aesthetically finished with binding trim. For PLAIN fabrics, the only available valance type is E.

balcony awning

Italia


construction

mounting

Arms and universal brackets made of aluminium ensure easy installation and lightweight construction. The use of pressure castings for the arms makes the contruction very durable.

construction coloursFor powder coating Selt company uses paints provided by renowned Swiss company - IGP. Using the IGP-DURA®Clean powders gives us a coating characterized by a surface that is resistant to dirt and easy to maintain.

fabric

option

standard


View from the side – opened awningIf tilt angle exceeds 90° - surcharge for fabric

View from the sideclosed awning

View from aboveopened awning

View from aboveclosed awning

LOWICK


RAL 9010

46

balcony awning

Italiab a l c o n y

CASSETTE no



PROJECTION 0.7 m

MAXIMUM PROJECTION

0.7 m (2.1 m fabric on the roller tube)

MAXIMUM WIDTH

5.0 m

ARMS drop arms, aluminum

OPTIONAL HOOD no

CONSTRUCTION COLOUR




MANUAL OPERATION

crank: 1.5 m; 1.8 m; 2.2 m

AUTOMATICDRIVE

no

47

Balcony Italia is an aesthetic solution for protection from the sun. It is also a practical decoration for balconies, terraces and balcony niches. The characteristic arms for this awning are fixed to the balcony balustrade. Their construction enables proper inclination adjustment. There are hooks at both ends of the arms that latch onto the front bar. Suitable fabric tension is achieved by rolling-up any excess fabric. The light construction makes awning installation very easy. Balustrade arms give more freedom for installation on balconies. Construction elements are powder lacquered in white colour.



balcony awning

Italiab a l c o n y


mounting


fabricAll of the acrylic fabrics are impregnated using the protective agents TEFLON or SCOTCHGARD. They provide excellent protection and strengthen the fabric’s resistance to water and dirt. It is important to remember that conditions such as acid rain, organic matter contamination and cleaning the fabric with abrasive chemicals may destroy the protective surface of the fabric.

Installation to the armInstallation to the arm hook

Installation to the arm hook(lowered arm)

LOWICK

RAL 9010

constructionAluminium arms and brackets provide light and durable construction, as well as easy installation.

50

balcony awning

Italiabox

CASSETTE yes



PROJECTION 1.0 m; 1.4 m;

MAXIMUM PROJECTION

1.4 m

MAXIMUM WIDTH

5.0 m

ARMS drop arms, aluminum, with spring

CONSTRUCTION COLOUR




MANUAL OPERATION

crank: 1.5 m; 1.8 m; 2.2 m

AUTOMATICDRIVE


51

Box Italia is a window and balcony awning for shading and protection of window niches, shop windows, balconies, terraces and verandas. An aluminium box covers the fabric and protects it from adverse weather conditions. Aluminium drop arms are equipped with a spring which keeps the fabric tensioned and prevents the arms from folding under wind pressure. The awning’s weight is distributed between the arms and roller tube supports. Thus a box Italia could be installed even where the strength of the mounting surface excludes the use of a terrace awning with folding arms. The light construction makes the awning installation very easy. Construction elements are powder lacquered in white colour.



balcony awning

Italiabox


construction

mounting

The extruded aluminium cassette provides perfect protection for the rolled-up fabric from adverse weather conditions. The use of pressure castings for the arms makes the contruction very durable.


optio

n

standard


View from the side – opened awning. If tilt angle exceeds 90° - surcharge for fabric. Option available only for

the 1m arms

View from the sideclosed awning

View from aboveopened awning

View from aboveclosed awning

LOWICK


RAL 9010

CASSETTE yes


MOUNTING wall

MAXIMUM PROJECTION

4.0 m

MAXIMUM HEIGHT

2.0 m

MINIMUMHEIGHT

1.1 m

CONSTRUCTION COLOUR


FABRIC over 150 patterns: acrylic fabrics, Soltis 92

MANUAL OPERATION

powder coated aluminium bracket

side screen

Bora

54

Bora is a side screen installed on balconies, terraces or as an additional cover used with awnings and Pergolas. Its purpose is protection from the sun, wind and curious stares of neighbours or passer-bys.Our offer contains a wide range of cover patterns that provide a unique atmosphere around the entire shaded area. Bora is a perfect solution for restaurants and for the residents of housing estates and single-family houses. The construction is powder coated in white, beige, brown, structural graphite or silver.

55

mountingOption 1: Front post - mounting on hard surface.Option 2: Front post - mounting on soft surface.Option 3: Bracket for wall mounting.Each option enables secure and fast installation of the front bar in the bracket.

Option 3 Option 2 Option 1

side screen

Bora


120

138


cassetteCassette made from extruded aluminium, designed for mounting on the wall.

fabric tensioningFabric is tensioned by spring mechanism placed in the roller tube.


LOWICK

RAL 9010 RAL 1015 RAL 8014 71319 RAL 9006


www.selt.com

terrace awnings balcony awnings side screen - ripo.lvdes žalūzijas/Markīzes... · Flyer plate...

Documents

Transcript of terrace awnings balcony awnings side screen - ripo.lvdes žalūzijas/Markīzes... · Flyer plate...