Tenderer Principal Secretary/ Member Secretary, · 2020. 2. 14. · MORTH specification. 6860.00...

1

Tenderer Principal Secretary/

Member Secretary,

SDAT- Chennai-84.

SPORTS DEVELOPMENT AUTHORITY OF TAMILNADU

116.A – PERIYAR E.V.R. HIGH ROAD – NEHRU PARK

CHENNAI – 600 084

TWO COVER SYSTEM

(FINANCIAL BID/ COVER- B)

To

The Member Secretary,

Sports Development Authority of TamilNadu,

No.116-A, Periyar E.V.R. High Road,

Nehru Park,

Chennai- 600 084.

Sir,

Sub : Two Cover Tender system for the work of – Laying of 8-Lane Synthetic

Athletic Track including subbase, drainage, Equipments, Paver block around

the track and providing borewell at District Sports Complex, in Thanjavur

District under Khelo India Scheme.

Ref : Sports Development Authority of Tamilnadu, Chennai-84- Tender Notice

No.1882/NI-2/2018, Dated : _________2020

---

I/ We herewith submit my/our financial bid document for the work of Laying of 8-Lane

Synthetic Athletic Track including subbase, drainage, Equipments, Paver block around the track and

providing borewell at District Sports Complex, in Thanjavur District is enclosed.

The I.T. and GST Nos are enclosed.

Date: Signature of the Tenderer

1


Member Secretary,

SDAT- Chennai-84.

SCHEDULE-A

NAME OF WORK: LAYING OF 8-LANE SYNTHETIC ATHLETIC TRACK INCLUDING SUBBASE, DRAINAGE, EQUIPMENTS, PAVER

BLOCK AROUND THE TRACK AND PROVIDING BOREWELL AT DISTRICT SPORTS COMPLEX, IN THANJAVUR DISTRICT UNDER

KHELO INDIA SCHEME.

S. No

Description Total Qty

Unit Unit Rate

Amount

1 Excavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto 1000 metres all as per Morth specification 301

2925.00 Cu.M

2 Preparation of sub-grade and compact the same with 8 to 10 ton power roller including forming camber and gradients watering and rolling to reach required density complete.

6860.00 Sq.M

3 Providing and spreading of high quality weedicide over the prepared surface to avoid the growth of the weeds in the top surface.

6860.00 Sq.M

2


Member Secretary,

SDAT- Chennai-84.

4 Providing, laying, spreading and compacting graded stone aggregates to Wet Mix Macadam specification including pre mixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layer with paver in sub base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density

a 200mm thick layer 1375.00 Cu.M

5 Providing and applying primer coat over WMM surface using 6 kgs of bitumen emulsion for 10 sqm area including cost and conveyance of bituminous binder including labour charges for preparing the surface and applying the required quantity of bitumen as tack coat by bitumen sprayer etc. complete as per clause 502 of MOST specification

6860.00 Sq.M

6 Providing and applying tack coat over PC with WMM surface treated with prime coat using 2.5 kgs of emulsion for 10 sqm area including cost and conveyance of bituminous binder including labour charges for preparing the surface and applying required quantity of bitumen as tack coat by bitumen sprayer etc. complete as per clause 503 of MOST specification

6860.00 Sq.M

3


Member Secretary,

SDAT- Chennai-84.

7 Providing and laying Dense Bituminous macadam 50mm consolidated thickness using 4% of bitumen 60/70 grades per clause 507 of MORTH specification.

6860.00 Cu.M

8 Providing and laying Bituminous concrete 25mm consolidated thickness using 5.1% of bitumen 60/70 grade as per clause 512 of MORTH specification.

6860.00 Sq.M

9 Supply and installation of synthetic Athletic track flooring of IAAF approved make of German make or any other equivalent make and installation and laying as per the manufactures' specification etc. complete

7280.00 Sq.M

10 Providing and fixing precast cement concrete road kerbs of size 300 x 150 mm made to shape in C.C.1:2:4 using 20 mm down size Coarse graded aggregate including form work and fixing in base cement concrete 1:3:6 nominal mix laid over sand bed including pointing exposed faces with C.M 1:3 etc. complete, as directed.

880.00 RM

4


Member Secretary,

SDAT- Chennai-84.

11 Excavation in all types of soil including dense soil, disintegrated / weathered / soft rock (Poclainable) not requiring blasting for Footings of columns, pilecaps, Retaining walls, Core walls, catch pits, Lift pits, trenches for drains, etc., by mechanical means including manual excavation for levelling, dressing of sides and ramming of bottom with all leads and to the following lifts dewatering of both ground and surface water, removal of slurry generated while excavation and keeping the area free of water with necessary shoring, strutting, required for keeping earth in position including back filling in the sides of foundation with filling materials as approved all as per the specifications etc, in layers of not exceeding 200 mm thick, consolidating each deposited layer by ramming and watering. Rate to include disposing the excess earth and spreading in layers to the required levels within the site wherever specified and carting away the surplus earth outside the campus as directed.

i lift upto 2.00 m depth 652.00 Cu.M

II Narrow excavation 430.00 Cu.M

5


Member Secretary,

SDAT- Chennai-84.

12 Supplying and filling in foundations and the area wherever specified with approved good quality filling materials in plinths, area development etc. wherever specified in layers of not exceeding 150 mm thick including breaking clods, storing, transportation, double handling, watering, compacting each layer with vibratory compactor and at un-accessible places with wooden / steel rammers to achieve 95% proctor density at optimum moisture content, all leads and lifts, bailing / pumping out of water to keep site dry while backfilling cost shall include conveyance of all materials, labour, machinery etc. complete as directed. The rate to include loading, unloading, hire and fuel charges for tools and plants and other incidental charges etc., complete.

a Approved quality quarry dust 281.00 Cu.M

13 Providing and laying plain cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 stone aggregate) of specified thickness using coarse graded aggregate of 40 mm and down size for levelling course under footings, steps, walls, platform, floors etc. including form work wherever necessary and well compacted etc. all complete, as directed.

86.00 Cu.M

6


Member Secretary,

SDAT- Chennai-84.

14 Providing and fixing reinforced cement concrete perforated precast slab with cement concrete 1:1.5:3 for drain cover slab. Rate shall include for providing necessary casting platform, shuttering, reinforcement as detailed below, finishing exposed faces smooth wherever necessary and pointing the joints with C.M 1:3, 15 mm thick curing and fixing in position etc complete and as directed. Rate shall include for providing necessary MS angles of required size based on the thickness of precast slab and to be fixed on the edges of the precast slab including grouting the lugs with Cement concrete 1:1.5:3, GI Hooks for lifting the slab etc complete, as directed for trench covers, drain covers etc.,

75 mm thick 620.00 Sq.M

15 a Brick work in Cement Mortar 1:5 using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specification. For Foundation and Basement

333.00 Cu.M

b For super structure in Ground floor 8.00 Cu.M

7


Member Secretary,

SDAT- Chennai-84.

16 Providing 15 mm thick water proof plaster in internal walls(wherever necessary) with Cement Mortar 1:3 (1 cement : 3 Fine sand) with water proofing compound as per IS specification and roughening the surface in green condition with wire brush and clearing of loose particles with sponge brush (washed sand finish)

2155.00 Sq.M

17 Providing and laying in position the RCC hume pipes (NP3) of approved quality and make including collars,. necessary Excavation, PCC 1:2:4 supports, Sand cushion of 150mm on all sides, Refilling with earth, Compaction and making good the level, alignment etc., complete

a 300mm dia 130.00 RM

b 600mm dia 12.00 RM

18 Supply and fixing in position best quality PVC Soil/waste pipes of various size having ISI mark and providing leak proof joints including fixing to the wall with special PVC /MS clamps etc., and making connection to all sanitary fittings dismantling masonry/RCC works wherever necessary and making good the dismantled portion to the original condition, complying with standard specification etc complete. (160mm dia)

65.00 RM

8


Member Secretary,

SDAT- Chennai-84.

19 Construction Rain water chamber of 800 x 800mm and average depth of 1.2m in Brick work with II class ground moulded well burnt chamber bricks in cement mortar 1 : 5 , with base concrete 1:5:10 to a thickness of 15cm, plastering in C.M. 1:5, 12mm thick inside and outside, providing channels and slopes, M 25 Precast R.C.C. cover slab 7.5cm thick complete. The rate shall include for necessary excavation, dewatering, refilling, watering, ramming, removing, the surplus excavated material and making good the same complete as required. Cost shall be inclusive of providing, CI manhole cover 600 x 600(Medium duty) with frame.

6.00 Nos

20 Plastering the walls with Cement Mortar 1:3, 12 mm thick ( 1 cement : 3 fine sand ) according to specifications. Rate shall include for necessary staging, scaffolding and curing at all levels and elevations etc., complete as directed.

273.00 Sq.M

21 Providing form work for centering shuttering etc for all Rcc works including strutting upto 3.29m in all floors using M.S Sheets of size 90cm x 60 x 10g stiffened with m.s angle of size 25mm x 25mm x 10g over silver oak country wood joints of size10cmx 6.5cm spaced at about 90cm c/c and supported by casurina props of 10cmto 13 cm dia spaced at 75cm c/c complying with standard specification and as directed and removing the same after specified period without damaging concrete etc complete

a For Rectangular beam, slab, waist slab, landing slab, lintel and ball other plain surfaces etc complete.

50.00 Sq.M

9


Member Secretary,

SDAT- Chennai-84.

b Vertical Centering 120.00 Sq.M

22 Reinforced cement concrete 1:11/2:3 (one cement, one and half sand and three aggregates) using 20mm gauge H.B.S.J for all R.C.C works connected to the work excluding centering, shuttering and cost of reinforcement grill but including curing, finishing etc., complete and also including fixing fan clamps and fixtures wherever necessary as directed by the departmental officers .

a Foundation & Basement 29.50 Cu.M

b For super structure in Ground floor 4.00 Cu.M

23 Supplying and fabricating and placing in position MS or RTS steel rods for all R.C.C.works including cost of steel and cost of binding wire also.

2900.00 Kgs

24 Plastering the walls and floors withC.M1:5, 12mm thick using fine river sand including curing and finishing neatly complying with standard specification and as directed by the departmental officers etc., complete.

75.00 Sq.M

10


Member Secretary,

SDAT- Chennai-84.

26 Manufacturing supplying and fixing in position of steel window with openable shutter frame made out of steel sections confirming to IS 7452/1982. The outer frames of windows made out of 'Z' section (F7D) of size 20x20x3mm confirming to IS 7452/1982. Mullions are made out of (F4B) T section of size 46x25x3mm confirming to IS 7452/1982The shutters are individual and each of them can be operated separately. Sash bars are made of 'T' Section (T2)of size 25x22x3mm 2 Nos of sturdy hinges and one number of handle cum ratch of special type are fixed for each open able shutter. Suitable opening is left for its easy operation. One number of window adjustable string with fixing bracket of sufficient length are provided for each shutter 4 No of 40x40x3mm angle fold fasts of 230mm length are welded to the frames at appropriate point. M.S.square bars of 12mm size is welded to the inner face of the window at equal intervals not excluding 10cm spacing 20guage M.S. Sheet to be used. T.W beading of size 15x15mm with screws for fixing.

3.50 Sq.M

27 Fabricating supplying and fixing of MS doors with single/two leaves with following specifications Door outer frame 40x40x6mm Angle shutter frame 35x35x6mmAngle, M sheet 20 gauge intermediate Stiffener "T" Section 25x25x6mm, panel should be covered with 20 gauge MS sheet with necessary Tower Bolt 30cmlength, butt hinges, handle on both sides hold fast etc., complete with one coat of red oxide primer.

2.50 Sq.M

11


Member Secretary,

SDAT- Chennai-84.

28 White washing the walls and ceiling with best shell lime using fevicol, sodium chloride and blue etc, including preparation of surface and neat finishing etc, complete with standard specification and as directed by the Departmental officers etc., complete

75.00 Sq.M

29 Painting the new walls with two coat of cement paint of approved quality and colour including preparation of surface and finishing neatly and with one coat of primer etc., complete complying with std., specification and as directed by the departmental officers.

75.00 Sq.M

30 Painting the new iron works, in all floors, two coats of best synthetic enamel paint of approved quality, colour and brand (to be approved by Executive Engineer before use on works) over one coat of primer including scrapping and preparation of surface, cost of brushes, high scaffolding charges, neat finishing complying with std., specification.

8.50 Sq.M

31 Supply and fixing in position C.I.Man hole covers of 0.60Mx0.60M sizes (heavy duty) with frame of various sizes of best approved quality and as per standard specifications etc complete.

2.00 Nos

32 Supplying and fixing PVC foot steps 16.00 Nos

12


Member Secretary,

SDAT- Chennai-84.

33 Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

85.00 Cu.M

34 Random Rubble masonry in cement mortar 1:3 using fine dressed rough stone and bond stone for foundation and basement etc complete with std specification.

6.00 Cu.M

35 Cement Concrete 1:3:6 (One Cement, Three sand and Six broken stone jelly) using 40mm size hard broken stone jelly for dummy columns, excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete. (Reinforced Cement Concrete 1:2:4 for slab to be extended upto top of splashing with pressed tiles and future extension rods to be embedded in CC 1:3:6 (One Cement, Three Sand and Six hard broken stone jelly). Dummy columns should be at least 1 metre height)

25.00 Cu.M

36 Supply and fixing of 75x75x6mm Angle ring made up of 75x6mm MS flat with necessary anticorrosive zinc chromate primer with necessary earth work excavation and inserting in the concrete surface and finish neatly etc complete.

38.00 RM

13


Member Secretary,

SDAT- Chennai-84.

37 Supplying laying and jointing UPVC pipes (schedule -80) of approved quality and best variety conforming to ISS and with ISI mark of the following sizes including cutting threading and fixing UPVC/ PVC/GI specials excluding cost of such specials and fixing to wall with necessary teak wood plugs, PVC clamps and screws, making holes on the wall or drilling holes in roof and making good the dismantled portion to original condition with necessary brick work and plastering wherever necessary, including scaffolding charges.

a 50mm dia 200.00 RM

b 40mm dia 60.00 RM

38 Supplying and fixing in position PVC /G.I specials such as plain bend tee door tee offsets, Y junction pliab with door of various sizes of best approved quality conforming to ISS and providing leak proof joints including fixing to wall and giving connection to the PVC pipe connection.

a 50mm dia UPVC Elbow 8.00 Nos

39 Supply and fixing of 35 sq.mm cable including earth work excavation and refilling the same

90.00 Nos

40 Drilling of Bore wells anywhere in TamilNadu including transportation from one place to another within TamilNadu in alluvial soil sedimentary strata of clay and sand stone shale pennles boulders etc. By first taking a pilot bore of 140mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs fuel, labour and drilling bentonite and water required for drilling at site.- Up to 60m depth ending below ground level.

14


Member Secretary,

SDAT- Chennai-84.

a Up to 60m depth ending below ground level. 60.00 RM

b From 60m upto 90m Depth ending from ground level 30.00 RM

c From 90m upto 120 m Depth ending from ground level 30.00 RM

d From 120 to 150 Depth ending from ground level 30.00 RM

e From 150 to 180 Depth ending from ground level 30.00 RM

f From 180 to 210 Depth ending from ground level 30.00 RM

41 Reaming 150mm dia pilot bore to 300mm dia bore as directed by the TWAD Board.

a Up to 60m depth ending below ground level. 60.00 RM

b From 60m upto 90m Depth ending from ground level 30.00 RM

c From 90m upto 120 m Depth ending from ground level 30.00 RM

d From 120 to 150 Depth ending from ground level 30.00 RM

e From 150 to 180 Depth ending from ground level 30.00 RM

f From 180 to 210 Depth ending from ground level 30.00 RM

15


Member Secretary,

SDAT- Chennai-84.

42 Labour Charges for developing the Borewell with air compressor of 600 CFM capacity (Minimum 8 Hours) including transportation, labour and fuel charges for compressor as directed by TWAD Officers and conducting yield test by 'V' notch method.

8.00 Hours

43 Labour Charges for inserting PVC Casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with Cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Executive Engineer.

210.00 RM

44 Supply and fixing of 160MM dia PVC special Blue pipes for Bore wells

a Plain pipes 80.00 RM

b Slotted special blue pipes 130.00 RM

45 Supply and erection of 3HP Submersible pump set suitable for 150mm dia Bore well with ISI mark IS8034 with Panel board DOL with two level Guard and Auto start. The cost including all taxes and the panel board should be provided as per specification given with erection charges.

1.00 Nos

46 Supply and run of 4 sq.mm 3 core flat type copper cable 250.00 RM

16


Member Secretary,

SDAT- Chennai-84.

48 Plain cement concrete 1:2:4(one of cement, two of sand and four of aggregate) using 20mm Hard broken granite stone jelly for foundation including dewatering if found necessary and laid in layer of not more than 15cm and consolidation etc complete.

15.00 Cu.M

49 Supply and fixing of GI Pipes of following dia with one coat of red oxide primer for cloth drying including necessary screws, clamps, welding charges etc complete with standard specification.

a 50mm dia GI pipe 465.00 RM

b 40mm dia GI pipe 1200.00 RM

50 Supplying and fixing in position of PVC Coated Chain link fencing 12G 1.5"x1.5" including stiffener wire for fixing top and bottom and tying the fencing to the post with Aluminium binding wire etc complete complying with standard specification.

746.00 Sq.M

51 Supplying and fixing Ms grills for doors, windows, Ventilators and Gates of approved design and as directed by the departmental officers including cost of ms grills labour charges and cost of one of red oxide primer coat etc., complete complying with std. specification.

135.50 Kgs

17


Member Secretary,

SDAT- Chennai-84.

54 Providing cement concrete rubber moulded paver blocks of 65mm thick of approved quality and make, the cost including labour for paving the precast inter locking blocks over required sand cushion excluding cost of sand cushion but including hire charges for vibratory machine and paving the blocks in true and straight alignment with necessary gradient as directed by departmental officers.

693.00 Sq.M

55 Brick work in Cement Mortar 1:3 using best quality II class table moulded chamber burnt bricks of size 9"x4 3/8"x2 3/4" for foundation and basement including curing, etc., complete complying with standard specification.

45.00 Cu.M

Total Rs.

GST @ 12%

Grand Total Rs.

(Rupees __________________________________________________________________________ ________________________

___________________________________________________________________________)

18


Member Secretary,

SDAT- Chennai-84.

19


Member Secretary,

SDAT- Chennai-84.

20


Member Secretary,

SDAT- Chennai-84.

21


Member Secretary,

SDAT- Chennai-84.

Tenderer Principal Secretary/ Member Secretary, · 2020. 2. 14. · MORTH specification. 6860.00...

Documents

Transcript of Tenderer Principal Secretary/ Member Secretary, · 2020. 2. 14. · MORTH specification. 6860.00...