Tender Document...AD 500 004 7 emkay trading co emkaytradingco @gmail.com 0000151675 a-46, bapu...

Domain : bpcleproc.in

Parent department: BPCL

Department : CPO SERVICES Department officer : Shekhar Bhagat

System ID : 63703 Tender Reference No. : 1000337799

Tender Title : CONSTRUCTIONOF NEW TOILETBLOCK &OTHERMISCELLANEOUSE CIVILWORKS ATLONI LPGPLANT

Tender Date : 18/09/2019

Tender Description : CONSTRUCTION OF NEW TOILET BLOCK & OTHERMISCELLANEOUSE CIVIL WORKS AT LONI LPG PLANT

Envelope Bidding Type : In 2 Part bidding Envelope Bidding Option : +

Bid validity period (in days) : 120 Type of contract : Service

Project duration / delivery orcompletion period (in days)

: 120 Accept decimal value up to : 2

Estimated Value : 10123129.00 Form of Contract : Buy

Bid submission configuration

Bidding access : Limited

Base currency : INR Bidding type : National

Key configuration

Bidding variant : Buy Pre-bid meeting : No

Dates configuration

Document downloading startdate

: 18/09/201913:00:00

Document downloading enddate

: 03/10/201915:00:00

Bid submission start date : 18/09/201913:00:00

Bid submission end date : 03/10/201915:00:00

Bid opening date : 03/10/201915:01:00

Tender Document

Tender reference No : 1000337799 System ID : 63703

Tender title : CONSTRUCTION OF NEW TOILET BLOCK & OTHER MISCELLANEOUSE CIVIL WORKS AT LONI LPGPLANT

page 1 of 71

Document / EMD / Security fee detail

Tender fees : Not Applicable EMD : Not Applicable

Mapped bidder details

Sr.No.

Name ofcompany Email address SAP code Address Mobile No

Email senton

1 Bridge & RoofCo. (India)limited

[email protected] /[email protected] /[email protected]

0000301526 Kolkata 03322174053 18/09/201912:47:01

2 CREATIVECONSTRUCTION & CO

[email protected] /[email protected]

0000172351 43/A,GARDNERLANE,KOLKATA

9874535998 18/09/201912:47:01

3 CredibleEngineeringconstructionprojects Limited

[email protected]

0000362918 473 Sagarsociety roadNo 2banjara hills

9441182872 18/09/201912:47:01

4 D S MadaneEngineers &Contractors


0000357807 47/23,Erandawane,SyndicateBankCompound,Nal Stop,LawCollegeroad,Pune-411004.

02025454544 18/09/201912:47:01

5 Dee Gee Saw andMetal Works PvtLimited


0000300748 TalkatoraRoadAishbagh

9839012197 18/09/201912:47:01

6 EARTHPAVERS (HYD)PVT LTD


0000316995 H.NO.6-3-581, A-2,5THFLOOR,KESHAVDALE,ANANDNAGARCOLONY,KHAIRATABADHYDERAB

040-23308849 18/09/201912:47:01



page 2 of 71

AD 500 004

7 emkay trading co [email protected]

0000151675 a-46, bapupark, kotlamubarakpur,new delh-3

01124610145 18/09/201912:47:01

8 Evercrest projectsPrivate limited


0000359634 103,PlatinumPlaza, Nr.IOCL petrolpump,Bodakdev,Ahmedabad380054

07926859005 18/09/201912:47:01

9 Expo ProjectEngg. ServicesPvt. Ltd.


0000346257 ExpoHouse, 150,SheriffDevji Street,Mumbai -400003Maharashtra

02261319600 18/09/201912:47:01

10 GULFENGINEERSANDCONSTRUCTORS PRIVATELIMITED

[email protected] 0000303151 128JAIHINDNAGARERNAVOOR

04425734619 18/09/201912:47:01

11 HARIOMBUILDERS


0000300779 Plot No. 29,Ward 3BNr.St.XaviersSchoolTraining,Adipur370205KutchGujarat

9825988102 18/09/201912:47:01

12 HIMALYACONSTRUCTION COMPANY

[email protected]

0000358332 1-74SAROGIAN GALIOPP.NEHRUPARKBHIWANI

9416397394 18/09/201912:47:01

13 JD Constructions [email protected] /[email protected] /[email protected]

0000331677 D.No.50-37-13TPTCOLONY,SEETHAMMADHARA,VISAKHAPATNAM

0891-3291500 18/09/201912:47:01

14 JupiterConstruction Co.

[email protected]

0000356836 C-1/204JANAK

9312239088 18/09/201912:47:01



page 3 of 71

PURI

15 K kumarrajaprojects privateltd


0000362485 7-5-55,Pandurangapuram,Visakhaptanam -530003.

0891-2525850 18/09/201912:47:01

16 Lakshmi InfraBuildcon Pvt.Ltd.

[email protected]

0000301716 A-26FLORENCE VILLASushant Lok-3 ,GolfCourse ExtnRoad,SECTOR-57GURGAONHARYANA-122002

18/09/201912:47:01

17 M K Roy & BrosProjects Limited


0000316648 68/A,NETAJISUBHASROAD,BUDGEBUDGE,KOLKATA-700137

9230094045 18/09/201912:47:01

18 M S ManishGoyal

[email protected]

0000309526 A - Block,Plot No. 228B, PatelNagar,Behind S.P.Office, CityCenter

18/09/201912:47:01

19 MANASCONSULTANTS

[email protected]

0000315197 19/818,SECTOR-19, INDIRANAGAR

9415002193 18/09/201912:47:01

20 P. C.Construction

[email protected]

0000340616 B-303 ShreeRajal Dham,Plot 22,sector- 20 ,Koparkairane,NaviMumbai

9821143290 18/09/201912:47:01

21 PrestigeConstuction

[email protected]

0000300092 AAKASHDEEP, 4THFLOOR,PESTOMSAGAR,ROADNO-3,CHEMBUR,MUMBAI-89

02225544459 18/09/201912:47:01



page 4 of 71

22 R RENGINEERINGCOMPANY


0000331597 M/S R RENGINEERINGCOMPANYUNIT B-3,IDA,AUTONAGAR,VISAKHAPATNAM-530012

0891-2766799 18/09/201912:47:01

23 R.K.ENGINEERS


0000308709 133/3THAPARNAGAR,MEERUT

9837015240 18/09/201912:47:01

24 RAHULCONSTRUCTIONS THANE

[email protected]

0000345436 A 4 AMARGIAN COOPPREMISESSO LTDOPPKHOPAT ST STANDKHOPATTHANEWEST

02225470554 18/09/201912:47:01

25 ROCKSOILANDASSOCIATESCONST CO PVTLTD


0000300926 3HOMELANDS,55 HILLROADBANDRA,MUMBAI

9323161153 18/09/201912:47:01

26 S.THARTIUSENGINEERINGCONTRACTORS


0000303383 5A/195, IISTREET

04612375936 18/09/201912:47:01

27 SANMARGPROJECTS PVTLTD

[email protected]

0000348095 5th floorATS towerPlot no- 16,Sector 135Noida201305

0120-6242100 18/09/201912:47:01

28 Sarthak ContractsPrivate Limited


0000167616 Near PNBBank, 7 -Naa - 21,JawaharNagar,Jaipur.

0141-4113421 18/09/201912:47:01

29 Shri SaiConstruction


0000357481 G-256,Sector-63,Noida(201301)UttarPradesh

0120-4554593 18/09/201912:47:01



page 5 of 71

30 T S Ghai andCompany


0000301958 e/449,mayurviharphase-2,newdelhi-110091

9999916147 18/09/201912:47:01

31 Tridot Engineers [email protected]

0000123266 79,NandpuriColony,Hawa Sarak,Jaipur-302006

9587012185 18/09/201912:47:01

32 VIJAYBUILDERS &CONSTRUCTIONS PVT.LTD

[email protected]

0000300630 24 Goodwillpremises,178 Swastikindustrialestate, CSTroad,Kalina.

02226541741-43 18/09/201912:47:01

33 Vintech Builders [email protected]

0000357821 H.O. 2140,Sector 48-C,Chandigarh

18/09/201912:47:01

Documents

Sr.No. File name File description

Filesize (in

MB)Date and time Status

1 NIT covering letterrevised 63703 new2.pdf

covering letter 0.506 17/09/201916:01:13

Approved

2 Ban on use of HydraCrane in BPCL work

sites110.pdf

Ban on Hydro Crane 0.383 04/09/201910:47:23

Approved

Bidding forms

Technicalbid

General Instructions to bidders for e-tendering

Sr.no. Description

Bidder'sConfirmation

1 I /We hereby agree to all the terms and conditions of the attachedAnnexure-I

Annexure I- General Instructions to bidders for e-

tendering



page 6 of 71

Technicalbid

General Conditions of Contract & HSSE requirements

General Conditions of Contract & HSSE Requirement

Description BiddersConfirmation

I /We hereby agree to all the terms and conditions of the attached Annexurefor General Conditions of Contract

I /We hereby agree to all the terms and conditions of the attached Annexurefor HSSE Requirements

Annexure II - General Conditions of Contract & HSSE

requirements

Technicalbid

Standard Payment Terms

Standard Payment Terms

BPCL Standard Payment Terms Bidders Confirmation

I agree to the Payment terms mentioned in the Annexure

Annexure III- Standard Payment Terms

Technicalbid

Bidder shall have to essentially sign the Integrity Pact(IP) for participating in the tender. Bidder isrequired to download the IP document, sign and also take the witness signatures and upload thesame.

IP

Sr.No. Item Description


1 Download the Integrity Pact of BPCL. The same is required to besigned by the vendor and also take the witness signatures and uploadthe same.

Annexure IV- Integrity Pact(IP)



page 7 of 71

Technicalbid

Instruction to Bidders

Instruction to Bidders

Item Description Bidder'sConfirmation

I /We hereby agree to all the terms and conditions of the attached Annexurefor Instruction to Bidder

Annexure V- Instruction to Bidders

Technicalbid

Annexure VI - Technical documents, QAP, Specification, Drawing, Scope, Special PaymentTerms, reconciliation Details, Free Issue Steel plate Details etc.

Drawing, Technical Specification, QAP, Scope of JOB etc.

Sr.No. Item Description


1 I /We hereby agree to all the terms and conditions of the attachedAnnexure (including Drawing, Technical Specification, QAP, Scope ofJOB etc.). Any Technical Deviation can be mentioned in TechnicalDeviation Statement only.

Annexure VI - Technical documents, QAP, Specification,

Drawing, Scope, Special Payment Terms, reconciliation

Details, Free Issue Steel plate Details etc.

Technicalbid

Deviation, to be described in below given table. If no deviation, then write NIL DEVIATION.

Deviation

Annexure Number Form Name Clause Number Deviation Justification for Deviation

Annexure VII - Deviation statement



page 8 of 71

Technicalbid

GST Form

GST Form

Sr.No ParticularsDetails to beprovided bythe vendor

1 Kindly Provide Your Complete Billing Address (Type of GST namelyIGST/ CGST-SGST will be determined based on the billing addressprovided in the tender & the state in which works are being executed).The billing address will be Final & Binding till completion of the work

2 Provide your GSTIN for your above mentioned Billing Address

3 Kindly Confirm that GST rate is 18% for the tender. In case ofdeviation, the same to be given in deviation sheet.

4 State whether the Tenderer/ Firm/ Company is a Micro or SmallEnterprise (MSE). If YES, please provide Supporting Document.

5 State whether the Tenderer/ Firm/ Company is a Micro or SmallEnterprise (MSE) owned by Scheduled Caste (SC) or the ScheduledTribe (ST) Entrepreneurs. If YES, please provide SupportingDocument.

6 I/We declare that we are not currently serving any Holiday ListingOrder/s issued by BPCL or MOPNG debarring us from carrying onbusiness dealings with BPCL/ MOPNG or serving a banning order byanother Oil PSE.

7 I/We hereby declare that none of the Proprietor/ Any of the Partners/Any of Directors of your Firm/ Company is related to Any of theDirectors of BPCL. In case of deviation, the same to be given indeviation sheet.

DECLARATIONS AND GST Form

Price bid

Price bid for Service of SOR ITEMS

Column name Bidder response

SAP Item No. 10

Pricebid for Loni



page 9 of 71

Service Code 9018736

Short Description . . . EXCV<1.5 ORD DIS IN

Long Description

Earth work in excavation upto required depth belowexisting groundlevel upto required depth includingremoval of vegetation, shrubs anddebris cutting anddressing the sides in slopes and bottom, levelling,grading and ramming of bottoms, bailing out of water ,supplying ofTemporary supports to existing servicesline like water pipes, sewagepipes, electric overheadand u/g cables etc all if encountered, shoring, strutting,backfilling in foundation trenches/plinth beam/underthefloors etc. compacting by the side of the foundationas directed by theEngineer in Charge includingspreading, watering and compaction usingsuitablecompactors. The measurement of the excavation wouldbe based onactual depth of excavation with applicablerate for different depths.Payment to be made as perexcavation plan only.No payment would be madeforextra excavation for making slopes etc.(Paymentagainst this itemshall be released only for the earthbeing disposed. Disposal shall bedone inside BPCLpremises)Depth upto 1.5 M normal soil

Plant 0

UOM M3

Quantity 350

Unit Rate in Rs. (Figure) Publishedby BPCL

242

Discount on Basic % (Positive orNegative: Negative discount willreduce the prices whereas Positivediscount will add on to the rate)

Unit Rate in Rs. After Discount(Figure)

Total Cost

GST in %

GST in Rs.

Total Landed Amount in Rs.(Figures)

Total Landed Amount in Rs.(Words)

SAC Code



page 10 of 71


SAP Item No. 20


Short Description . . . EXCV<3 ORD DIS IN

Long Description

Earth work in excavation upto required depth belowexisting groundlevel upto required depth includingremoval of vegetation, shrubs anddebris cutting anddressing the sides in slopes and bottom, levelling,grading and ramming of bottoms, bailing out of water ,supplying ofTemporary supports to existing servicesline like water pipes, sewagepipes, electric overheadand u/g cables etc all if encountered, shoring, strutting,backfilling in foundation trenches/plinth beam/underthefloors etc. compacting by the side of the foundationas directed by theEngineer in Charge includingspreading, watering and compaction usingsuitablecompactors. The measurement of the excavation wouldbe based onactual depth of excavation with applicablerate for different depths.Payment to be made as perexcavation plan only.No payment would be madeforextra excavation for making slopes etc. (Paymentagainst this itemshall be released only for the earthbeing disposed. Disposal shall bedone inside BPCLpremises) Depth >1.5 BUT <3.0 M in normal soil

Plant 0

UOM M3

Quantity 15


306



Total Cost

GST in %

GST in Rs.





page 11 of 71

SAC Code


SAP Item No. 30


Short Description . . . PCC PLIN 1:4:8 CS 20

Long Description

"Providing and laying PLAIN CEMENT CONCRETEfor all depths below andupto plinth level infoundations, drains, fillings, non-suspended floors,pavements & ramps or any other works etc.includingthe cost ofpositioncement concrete of specified gradeincluding the cost ofcentring andshuttering, tamping,ramming, vibrating, curing, in anyshape, position, thickness and finishing the top surface rough orsmooth, etc. allcomplete as per directions of Engineer-in-charge. - All work upto plinthlevel1:4:8 (1 cement: 4 coarse sand : 8 crushed stoneaggregate 20 mm nominalsize)"

Plant 0

UOM M3

Quantity 60


3691



Total Cost

GST in %

GST in Rs.



SAC Code



page 12 of 71


SAP Item No. 40


Short Description . . . PCC PLIN 1:2:4 CS

Long Description

"Providing and laying PLAIN CEMENT CONCRETEfor all depths below andupto plinth level infoundations, drains, fillings, non-suspended floors,pavements & ramps or any other works etc.includingthe cost ofpositioncement concrete of specified gradeincluding the cost ofcentring andshuttering, tamping,ramming, vibrating, curing, in anyshape, position, thickness and finishing the top surface rough orsmooth, etc. allcomplete as per directions of Engineer-in-charge. - All work upto plinthlevel1:2:4 (1 Cement: 2 coarse sand: 4 graded stoneaggregate 20 mm nominalsize)"

Plant 0

UOM M3

Quantity 45


4131



Total Cost

GST in %

GST in Rs.



SAC Code



page 13 of 71


SAP Item No. 50


Short Description . . . RCC PLIN 1:1.5:3 CS

Long Description

Supplying and laying in postion RCC of specifiednominal mix using 20mmanddown size graded crushedstone aggregate in sub structure of alltypes e.g.trenches, culverts, manholes, pipe encasement,catchpits, drains, pits, etc., including placing ofconcrete, supplying pockets, openings, recesses, chamfering wherever requiredetc., vibrating, tamping, curing andrendering if reqd. togive a smooth and even surfaceetc. allcomplete(excluding the cost of reinforcement, butincluding thecost of centringand shuttering)for alldepths below and upto plinthlevel in any shape,position, thickness etc. all complete as specifiedanddirected. Onlysteel shuttering will be used so as toobtain requiredfinish. Theheight of shuttering shall notexceed 1.5 m per lift ofconcrete.: 1:1.5:3 (1 cement: 1.5coarse sand: 3 grade stone aggregate20 mm nominalsize)

Plant 0

UOM M3

Quantity 50


5799



Total Cost

GST in %

GST in Rs.





page 14 of 71

SAC Code


SAP Item No. 60


Short Description . . . RCC AB PL 1:1.5:3 CS

Long Description

Supplying and laying in postion RCC of specifiednominal mix using 20mmanddown size graded crushedstone aggregate for columns, beams slabs andsoffits,staircases, lintels etc.of all typesincluding placingofconcrete, supplying pockets, openings, recesses,rendering if reqd. to givea smooth and even surface etc.all complete(excluding the cost ofreinforcement, butincluding the cost of centringand shuttering)forallheights above plinth level in any shape, position,thickness etc. allcomplete as specified and directed.Onlysteel shuttering will be used soas to obtainrequired finish. Theheight of shuttering shall notexceed1.5 m per lift of concrete.: 1:1.5:3 (1 cement: 1.5coarse sand: 3 gradestone aggregate 20 mm nominalsize)

Plant 0

UOM M3

Quantity 20


6584



Total Cost

GST in %

GST in Rs.





page 15 of 71

SAC Code


SAP Item No. 70


Short Description . . . STEEL REINFORCEMENT

Long Description

Supplying and placing HYSD steel reinforcement ofGrade 500 (TMT)conforming to IS 1786 in position forRCC worksincluding straightening, cutting, bending,placing in position andbinding with 16 SWG blacksoftannealed binding wire at everyintersection,supplying and placingappropriate cover block allcompleteincluding cleaning and making itfree from oil,grease etc. complete-for all heights and depthsandconforming to relevant IS code (Make: SAIL,TATA, JSW, ESSAR, VIZAG STEELor approvedequivalent make conforming to IS code)

Plant 0

UOM KG

Quantity 3000


53



Total Cost

GST in %

GST in Rs.



SAC Code



page 16 of 71


SAP Item No. 80


Short Description . . . S/F EARTH QUARY

Long Description

Supplying and Filling earth (Plastic Limit less than 20)obtained fromapproved quarries free from all organicvegetation and foreign matterincluding all royalities,taxes, mining cess etc., handling andtransportation tosite, spreading in layers not exceeding 150 mmwithinBPCL premises, watering, compacting bymechanical means by power drivenroller/ vibratorycompactor of minimum 8-10 tonne capacity. Thedensityto be achieved shall not be less than 90% of thedensity obtained in thelaboratory (modified proctormethod)

Plant 0

UOM M3

Quantity 5


330



Total Cost

GST in %

GST in Rs.



SAC Code




page 17 of 71

SAP Item No. 90


Short Description . . . S/F RIVER SAND

Long Description

Supplying and filling sweet river fine sand of approvedquality underfloors, in building/tank foundation, plinth,in trenches etc. of anycompacted thickness insideBPCL premises, spreading in layers ofthickness notexceeding 150mm at all depths, compactingmechanically tominimum 90% of maximum laboratorydry density (modified proctor)including dressing asrequired etc. complete, as directed byEngineer-in-charge.Silt content should not be more than 8% in sandandSand should conform to Zone III & IV as per IS383 & 2386

Plant 0

UOM M3

Quantity 40


792



Total Cost

GST in %

GST in Rs.



SAC Code


SAP Item No. 100




page 18 of 71

Short Description BLD RCC PLINTH PROTECTION

Long Description

Providing, laying, consolidating and curing reinforcedcement concrete(R.C.C.) in required thicknessincluding centering, shuttering, scaffolding but excluding steel reinforcementetc.complete, using cementof approved make,including curing as specified. The rates areapplicablefor all heights / depths and floors including scaffolding,unless otherwise specified.

Making plinth protection 50 mm thick of cementconcrete 1:3:6 (1 cement:3 coarse sand : 6 graded stoneaggregate 20 mm nominal size) over 75mmthick bed ofdry brick ballast 40 mm nominal size, well rammedandconsolidated and grouted with fine sand, includingfinishing the topsmooth. Rate to incl. shuttering formwork , curing for a period of 14days. Removing ofcentering; shuttering; shoring scaffolding shall bedonecarefully

Plant 0

UOM M2

Quantity 40


650



Total Cost

GST in %

GST in Rs.



SAC Code




page 19 of 71

SAP Item No. 110


Short Description . . . GALVALUME SHEET

Long Description

"ROOFING COLOUR COATED HI PROFILESHEETING Supplying andfixingpermanently colourcoated hi rib profiled sheets of rib depth 28- 30mmwith 190 - 250 mm pitch distance. Hi profiled sheetsshall beminimum0.5 TCT galvalume or zincalume steelsheet having minimum yieldstrengthof 550 Mpa, with acoating of mass of minimum 150 gsm(AluminiumZincalloy). The Galvalume steel sheet shallbe finished with 20 micronsofsilicon modifiedpolyester (SMP) colour coating (approvedcolour)overan epoxy primer coat of 5 micron. Thesheet shall also have a backcoatof 5 microns on reverseside over 5 microns primer coat. The sheetshallbe fixedover the purlins with hexagonal head selfdrillingfasteners of12 - 14 x 55 mm long includingneoprene/EPDM washer on eachcrest ofsheet. Themaximum end lap of sheet shall be 150 mm andsealedwithsilicon sealent. The work shall include of alllabour, equipments, materials, submission of shop drawings, cost ofconsumables, fasteners, washers etc. Payment would be made on the basis ofroof area coveredbythe sheets.

This item includes for lovers, claddings, roof lightopenings, etc., allcomplete as directed by the engineerin charge. Overlaps shall not bepaid"

Plant 0

UOM M2

Quantity 25


641



Total Cost

GST in %

GST in Rs.

Total Landed Amount in Rs.



page 20 of 71

(Figures)


SAC Code


SAP Item No. 120


Short Description . . . BRK MSN PL CS CL75

Long Description

BRICK MASONRY BELOW PLINTH: Providing andlaying Brick work withbrickshaving compressivestrength not less than specified and conforming toBISstd. of specified class and above, satisfyingefflorescene, waterabsorbtionand dimension test as perIS code) infoundation and plinth inCement mortar1:5(1 cement: 5 Coarse sand) asper specifications inoneor more brick thickness including soaking of bricks,providingopenings, recesses , scaffolding, staging,curing, finishing the jointsflush belowground level andraking out joints etc. all complete, as perdirectionsofEngineer-in-charge.CL 75 (BIS Class 75, Compressivestrength 75kg/cm2)

Plant 0

UOM M3

Quantity 70


4556



Total Cost

GST in %

GST in Rs.




page 21 of 71


SAC Code


SAP Item No. 130


Short Description . . . BRK MSN AB PL CS C75

Long Description

BRICK MASONRY ABOVE PLINTH , Supplyingand laying Brick work insuperstructure aboveplinthlevel including supplying and laying goodqualitybricksconforming to BIS std. of specified class andabove, satisfying efflorescene, water absorbtion anddimension test as per IScode) in superstructureusingCement Mortar 1:5(1part cement : 5 partcoarse sand)includingraking out joints, curing, soaking of bricks,providing recesses, openings, scaffolding, staging,curing, raking out jointsetc. complete as directedCL 75 (BIS Class 75, Compressive strength 75kg/cm2)

Plant 0

UOM M3

Quantity 30


4948



Total Cost

GST in %

GST in Rs.





page 22 of 71

(Words)

SAC Code


SAP Item No. 140


Short Description . . . SOAK PIT

Long Description

Making soak pit 2.5 m diameter 3.0 metre deep with 45x 45 cm dry brickhoney comb shaft with bricks andS.W. drain pipe 100 mm diameter, 1.8 mlong completeas per standard design conforming to IS:2470. ( Rateisinclusive of top slab of required thickness & C.I.FRAME with cover)with common burnt clayF.P.S.(non modular) bricks of class designation7.5

Plant 0

UOM EA

Quantity 1


22301



Total Cost

GST in %

GST in Rs.



SAC Code



page 23 of 71


SAP Item No. 150


Short Description . . . SEPTIC TANK 50 PERS

Long Description

"Construction, supplying, installation, testing andcommissioning ofseptic tank as per standards andIS:2470 Part-I , with all necessaryaccessories like inlet,outlet vent pipes, manhole covers, rungs etc.includingearthwork in excavation in all type of soil except softandhard rock, backfilling and disposal of surplus earth forallleads etc. complete as per standards, drawings,specifications and directions of Engineer-in-Charge.The job includesexcavation;sand filling; cementconcrete foundation; plastering (1:3CM)of internalwalls with waterproofing compound;plastering 1:4 CMexternalwall; on top and sides upto230mm belowfinished formation ground leveland also incl. CImanhole cover over septic tank; inlet/ outletchambers;3M long 65mm dia AC vent pipe with AC cover/fixedto the roofslope of the septic tank

50 persons"

Plant 0

UOM EA

Quantity 1


52056



Total Cost

GST in %

GST in Rs.





page 24 of 71

SAC Code


SAP Item No. 160


Short Description . . . PLASTER 12MM CS 1:5

Long Description

CEMENT PLASTER Providing cement plasterfinished including cleaning, hacking of base surfaces, scaffolding, curing,finishing etc. allcomplete for all heights as perspecifications and directions ofEngineer-in-chargeincluding grooves, bands, drip moulder whereeverrequired as specified. also including providing 20gauge chicken wiremesh stretched tight at all RCC/PCC and masonry meeting points in 300mmwide strips(150mm on on each surface) fixed with G.I. "U" typenailsbefore plastering.(Payment will be madeseparately for chicken wiremesh).12mm thick with 1:5(1 cement: 2 parts of fine sand: 3 parts ofcoarse sand)

Plant 0

UOM M2

Quantity 500


129



Total Cost

GST in %

GST in Rs.





page 25 of 71

SAC Code


SAP Item No. 170


Short Description . . . PLASTER 18MM CS 1:5

Long Description

CEMENT PLASTER Providing cement plasterfinished including cleaning, hacking of base surfaces, scaffolding, curing,finishing etc. allcomplete for all heights as perspecifications and directions ofEngineer-in-chargeincluding grooves, bands, drip moulder whereeverrequired as specified. also including providing 20gauge chicken wiremesh stretched tight at all RCC/PCC and masonry meeting points in 300mmwide strips(150mm on on each surface) fixed with G.I. "U" typenailsbefore plastering.(Payment will be madeseparately for chicken wiremesh).18mm thick with 1:5(1 cement: 2 parts of fine sand: 3 parts ofcoarse sand)

Plant 0

UOM M2

Quantity 170


176



Total Cost

GST in %

GST in Rs.



SAC Code



page 26 of 71


SAP Item No. 180


Short Description . . . SL DPC M SAND

Long Description

Supplying and laying damp-proof Course (DPC) ofspecified thickness withcement concrete of specifiedratio withstone aggregate 12.5 mm nominalsize andmixing approved waterproofing compound @ 1 lit/1 kgper cementbag or as per manufacturerspecificationsincluding shuttering/curingand finishing the topsurfacesmooth complete. Manufactured sand ispermitted basedon meeting the acceptance criteria. The DPC shallbelaid in 2 layers: 1:1.5:3 (1 cement: 1.5 m sand: 3grade stone aggregate12.5 mm nominal size) 50mmthick

Plant 0

UOM M2

Quantity 10


302



Total Cost

GST in %

GST in Rs.



SAC Code




page 27 of 71

SAP Item No. 190


Short Description . . . WC EUROPIAN

Long Description

Supplying and fixing white glazed vitreous chinaEuropean waterclosetwith ISI mark conforming to IS7231 - Studio type with cistern(EWC) of superiorquality 81cmhigh, double trap syphonic pattern, 'P'or'S' trap, with low level 10 litre low level white P.V.C.cistern withcover with siphon and standard flushfittings, with specified colorsolid plastic seat cover &lid of superior approved quality, CP brassbarhinges,screws, bolts, rubber, buffers 15mm dia PVC inletpipeconnectionand CP brass angle stopcock fixingEWC to floor withnecessary brassscrews, all completeat all leads and lifts as perdrawings, specifications andinstructions of the Engineer Incharge.

Plant 0

UOM EA

Quantity 1


7934



Total Cost

GST in %

GST in Rs.



SAC Code




page 28 of 71

SAP Item No. 200


Short Description . . . WC INDIAN

Long Description

"Providing and fixing water closet squatting pan(Indian type W.C. pan)with 100 mm Sand Cast Iron PorS trap, 10 litre low level white P.V.C. flushing cistern,includingflush pipe, manually controlled device(handle lever) conforming to IS : 7231, with all fittingsand fixturescomplete, including cutting andmaking good the walls and floors wherever required:White Vitreous chinaOrissa pattern W.C. pan of size580x440 mm with integral type footrests"

Plant 0

UOM EA

Quantity 3


4558



Total Cost

GST in %

GST in Rs.



SAC Code


SAP Item No. 210




page 29 of 71

Short Description . . . URINAL CHINA 580X380

Long Description

"Providing and fixing white vitreous china flat backhalf stall urinalof size 580x380x350 mm with whitePVC automatic flushing cistern, with fittings, standardsize C.P. brassflush pipe, spreaders with unions andclamps (all in C.P. brass) withwaste fitting as per IS :2556, C.I. trap with outlet grating and othercouplingsin C.P. brass, including painting of fittings and cuttingandmaking good the walls and floors whereverrequired: Single half stallurinal with 5 litre PVC.flushing cistern"

Plant 0

UOM EA

Quantity 4


6187



Total Cost

GST in %

GST in Rs.



SAC Code


SAP Item No. 220


Short Description . . . WASH BASIN 630X450MM

Long Description



page 30 of 71

"Supplying, fitting and fixing white glazed vitreouschina wash basinofsuperior quality with ISI markhaving single ordouble holes with 15mm CP brasspillar tap, CP brass chain and plugs, 32mm CP brasswastecoupling, 32mm CP Brass Bottle trap and unions,32mm dia PVC flexiblewaste pipe, 15mm PVC inletwater pipe connection, CI cantileverbracketsembeddedin 1:2:4 concrete, 15 mm CP brass angle stopcock,etc.fillingthe gaps between basin and wall with whitecement etc., pedestal, allcomplete at all leads and liftsas per drawings, specificationsandinstructions of theEngineer Incharge.

Flat back wash basin of size 630x450 mm"

Plant 0

UOM EA

Quantity 2


3265



Total Cost

GST in %

GST in Rs.



SAC Code


SAP Item No. 230


Short Description . . . MIRROR 6MM POLISHED

Long Description



page 31 of 71

supplying minimum 6mm thick polished float glassmirror, bevelled edge, of approved make fixed to with 6mm thick marineplywood sheetbackingwith necessary beading, fixingarrangements all complete at allleadsand lifts as perdrawings, specifications and instructions oftheEngineerIncharge.

Plant 0

UOM M2

Quantity 1


2356



Total Cost

GST in %

GST in Rs.



SAC Code


SAP Item No. 240


Short Description . . . PP GRANITE PARTITION

Long Description

supplying and fixing 18mm to 20mm thick pre polishedgranite dividersofapproved shade in between two urinalstalls with all exposed edgesbullnosed, fixing to thewall at all leads and lifts as per drawings, specificationsand instructions of the Engineer Incharge.Ratesshallinclude grouting the divider into the wall100mm deep and makinggoodthe surface. The exposed



page 32 of 71

area will be 900 mm x 450 mm (width).

Plant 0

UOM EA

Quantity 2


993



Total Cost

GST in %

GST in Rs.



SAC Code


SAP Item No. 250


Short Description . . . FLOOR TRAP 100MM OPN

Long Description

"supplying and fixing Heavy Grade Cast Ironfloor/Nahani trap ofspecified size with CP hingedheavy SS grating to be fixed in PCC M15with 20mmdown size aggregateand made water tight with all byeworkscomplete as per the direction ofthe engineer.

100mm openable"

Plant 0

UOM EA



page 33 of 71

Quantity 10


256



Total Cost

GST in %

GST in Rs.



SAC Code


SAP Item No. 260


Short Description . . . GULLY TRAP 150X100

Long Description

"supplying SW yard gully trap of specified sizeconforming to IS 651, with CI grating 150mm x 150mm and water tight lightweight CIcovers(not less than 7.5 Kgs) conforming toIS:1726 of size 300x300mmpaintedwith two coats ofbitumastic paint and seated in cementconcrete1:2:4including brick masonry in CM (1:4)plastered neatly with 15mmthick CM(1:3) on bothfaces, 150mm thick PCC bed of grade 1:4:8,necessaryexcavation, dewatering, backfilling, curingetc. complete at allleadsand lifts as per drawings,specifications and instructions oftheEngineer Incharge.

150x100 mm size P type"

Plant 0

UOM EA



page 34 of 71

Quantity 4


1216



Total Cost

GST in %

GST in Rs.



SAC Code


SAP Item No. 270


Short Description . . . BIB COCK 15NB

Long Description

"Providing and fixing C.P. brass long body bib cock ofapproved qualityconforming to IS standards andweighing not less than 690 gms.

15NB"

Plant 0

UOM EA

Quantity 4


459

Discount on Basic % (Positive orNegative: Negative discount will



page 35 of 71

reduce the prices whereas Positivediscount will add on to the rate)


Total Cost

GST in %

GST in Rs.



SAC Code


SAP Item No. 280


Short Description . . . UPVC WASTE PIP 100NB

Long Description

"supplying, fixing and / or laying, jointing and testingheavy duty6kg/cm2 UPVC pipe ISI marked pipelinesincluding ventilating pipe withall necessaryfittings andaccessories like specials, bends, single and /or double,equal/unequal branches of required degrees with orwithoutoval accessdoor, offsets of required projection,hill rest bend, invertedbranch of required degree, traps,plugs, cowl, clamps etc., allconforming to IS code , ofapproved make, with all leads and lifts, allcomplete asperspecification and direction of Engineer Incharge.

100mm dia"

Plant 0

UOM M

Quantity 40


319




page 36 of 71


Total Cost

GST in %

GST in Rs.



SAC Code


SAP Item No. 290


Short Description . . . GRANITE FLOORING

Long Description

Providing and laying Granite flooring includingflooring onkitchencounter slabs and wash basin counterslabs with 18mm - 20mm thickmarblestone (sample ofmarble shall be approved by Entineer-in-charge)over20mm (average) thick base of cementmortar 1:4 (1 cement : 4 coarsesand)laid and jointedwith grey/white cement slurry mixed withmatchingpigment, epoxy touch ups including rubbing,curing, and polishing toedgespolishing to granolithicfinish complete with Granite of any size, shape andshade

Plant 0

UOM M2

Quantity 2


2451





page 37 of 71

Total Cost

GST in %

GST in Rs.



SAC Code


SAP Item No. 300


Short Description . . . CERAMIC TILES 8MM

Long Description

FLOORING CERAMIC TILES GLAZED/MATTProvding and fixing glazed screenceramic printed tilesconforming to IS 15622 of minimum thickness 8mmofapproved desigh;colour, size and shade in floor,skirting, risers ofsteps and dados on 12mm thickcement plaster 1:3( 1 cement :3 coarcesand ) jointedwith white cement slurry mixed with matching pigmentincluding cleaning finished surface with Oxalic acid,wax polishing, etc. complete.

Plant 0

UOM M2

Quantity 50


708



Total Cost

GST in %



page 38 of 71

GST in Rs.



SAC Code


SAP Item No. 310


Short Description . . . CERAMIC TILES 5MM

Long Description

FLOORING CERAMIC TILES GLAZED/MATT :Provding and fixing glazed screenprinted ceramic tilesconforming to IS 15622 of minimum thickness 5mmofapproved design;colour, size and shade on wall,skirting, risers ofsteps and dados on 12mm thickcement plaster 1:3( 1 cement :3 coarcesand ) jointedwith white cement slurry mixed with matchingpigmentincluding cleaning finished surface with Oxalicacid, wax polishing, etc. complete.

Plant 0

UOM M2

Quantity 30


673



Total Cost

GST in %

GST in Rs.




page 39 of 71


SAC Code


SAP Item No. 320


Short Description . . . HDPE WATER TK 1000L

Long Description

"supplying and fixing HDPE water tank of approvedmake with ISI markandconforming to IS 12701 andwith GI fittings for inlet, outlet, Overflow, scour floatvalve, connections of required size anddia.Includingconnections and hoisting/fixing the sametank on roof and otherplacesat all heights with all bye-works complete at all leads and liftsas perdrawings,specifications and instructions of the EngineerIncharge.1000 lit"

Plant 0

UOM EA

Quantity 1


5375



Total Cost

GST in %

GST in Rs.





page 40 of 71

SAC Code


SAP Item No. 330


Short Description . . . WATERPROOF CMT+BRK

Long Description

Roof Treatment :Providing and laying integral cementbased waterproofing treatment for terraces includingpreparation of surface asrequired for treatment of roofs,balconies, terraces etc. consisting offollowingoperations. (a) Applying and grouting a slurry coat ofneatcement using 2.75 kg/m2 of cement admixed withwater proofing compoundconforming to IS :2645 overRCC slab including cleaning of surfacebefore thetreatment. (b) Laying broken bricks/brick bats of 25mmto100mm size with 50% of cement mortar 1:5 admixedwith water proofingcompound and providing 20 mmthick layer of cement mortar 1:5 admixedwith waterproofing compound to required slope, treatingadjoining wallsupto 300 mm height including roundingof junctions of walls and slabsetc. The cement mortarto be prepared with miminum 30% replacement ofOPCwith fly ash by weight of cement.

Plant 0

UOM M2

Quantity 45


803



Total Cost

GST in %

GST in Rs.





page 41 of 71

(Words)

SAC Code


SAP Item No. 340


Short Description . . . HDPE PIP EXPOSED 40

Long Description

"Supplying and laying HDPE pipes of heavy dutyconforming to IS code4984 with all necessary fittingssuch as bends, unions (flanges forpipesize above50mm), clamps, fixtures, etc., includingnecessaryearthwork, painting, threading etc., completeas per specification(including concealing below floor/ground, laying in a layer of sand, necessary painting with two coatsof anticorrosiveblack bitumasticpaint over a coat of approved primer ,etc.)

80mm"

Plant 0

UOM M

Quantity 60


208



Total Cost

GST in %

GST in Rs.





page 42 of 71

SAC Code


SAP Item No. 350


Short Description . . . HDPE PIP EXPOSED 25

Long Description

"Supplying, fitting and laying exposed HDPE pipes ofheavy classconforming to IS code 4984 with allnecessary fittings such as bends, tees, elbows, reducers,unions , nipples, plugs, clamps, fixtures, etc., inmasonry /concrete works including necessary paintingwith two coatsof oil paintover a coat of approvedprimer complete at all leads andlifts as perdrawings,specifications and instructions of the EngineerIncharge.

25mm NB"

Plant 0

UOM M

Quantity 60


153



Total Cost

GST in %

GST in Rs.



SAC Code



page 43 of 71


SAP Item No. 360


Short Description . . . PVC COWL 110NB

Long Description

"P/F PVC SLOTTED COWL (TERMINAL GUARD)on the Vent pipe

110mm dia"

Plant 0

UOM EA

Quantity 5


192



Total Cost

GST in %

GST in Rs.



SAC Code


SAP Item No. 370


Short Description . . . DOOR FRAME POWDER



page 44 of 71

Long Description

"Providing and fixing Pressed steel door, window &ventilator framesconforming to IS : 4351 made of 16SWG pressed steel sheet bent to shapeas per drawing,using bending machine to form solid, trueedges/corners, stiffened with 50mm x 5mm thick M.S.flatspacers welded to the frame facing the wall/column @max.600mm c/cincluding fixing the frame withmasonry/RCC/metal frame work forpartitions etc. bymeans of 300mm x 25mm x 6mm M.S. holdfastswelded tospacers and grouted with M-15 gradeconcrete in min.350mm x 100mm x 100mm sized hole in masonry/96mm long 12mm dia dashfasteners, bolting with metalframe work, making provisions for hinges, lockingdevices, other hardwares by machine cutting andproviding 3mmthick M.S. pad plates at all areas ofhardware fixation, welding etc.painting of all metallicsurfaces by 2 coats of synthetic enamel paint(approvedshade, ICI or approvedequivalent over red oxide zinc chromateprimer/electrostatic powdercoating of approved shade ,25 micron), finishing etc. all complete. Forframe size(assorted size out of) Overall 125mm x 60mm Section.

S/F Frames painted with Electrostatic powder coating."

Plant 0

UOM M

Quantity 30


526



Total Cost

GST in %

GST in Rs.



SAC Code



page 45 of 71


SAP Item No. 380


Short Description . . . PVC DOOR SHUTTER 35

Long Description

"35 mm thick factory made Solid panel PVC Doorshutter, made out ofsingle piece extruded soild PVCprofiles, 5 mm (? 0.2 mm) thick, havingstyles & rails(except lock rail) of size 95 mmx 35 mm x 5 mm, outofwhich 75 mm shall be flat and 20 mm shall betapered (on both side), having one side thickness of 15mm integrally extruded on the hinge sideof the profilefor better screw holding power, includingreinforcingwith MS tube of size 40 mm X 20 mm x 1mm, joints of styles & rails tobe mitered cut & jointwith the help of PVC solvent cement, self drivenselftapping screws & M.S. rectangular pipes bracket ofsize 190 mm X100 mm of cross section size 35 mm x17 mm x 1 mm at each corner. Singlepiece extruded5mm thick solid PVC Lock rail of size 115 mm x 35mm x 35mm, out of which 95 mm to be flat and 20 mmto be tapered at both ends, having 15 mm solid core inmiddle of rail section integrally extruded, fixing thestyles & rails with the help of solvent and self drivenselftapping screws of 125 mm x 11 mm, includingproviding 5 mm Single piecesolid PVC extruded sheetinserted in the door as panel,all complete as per manufacturer’s specification anddirection ofEngineer-in-charge."

Plant 0

UOM M2

Quantity 42


2428



Total Cost

GST in %

GST in Rs.



page 46 of 71



SAC Code


SAP Item No. 390


Short Description . . . LOUVER GLASS ANODIZE

Long Description

Supplying, fitting & fixing in position specified type ofanodised (15microns), fully glazed, heavy dutyaluminium windows & ventilator withframe of min.2mm thick, overall 75mm wide approved shade,aluminiumsheet louvers fixed at 50mm, bent to shapeincluding providing min. 3mmaluminium sheet sidemembers for framing the louvers (Aluminite, Aldowin,Jindal or any make with prior approval of BPCL) instandardsections as per IS 1948 or as per directions ofEngineer-in-Charge &including providing & fixingspecified type of glass with felt, aluminium beading,glazing clips & special sashputty of approved make etc.all Complete as perinstructions of Engineer-in-Charges.

Louvers with 5.5mm opaque glass.

Plant 0

UOM M2

Quantity 4


4093



Total Cost

GST in %

GST in Rs.



page 47 of 71



SAC Code


SAP Item No. 400


Short Description . . . DOOR LATCH 250

Long Description

"Providing and fixing bright finished brass door latchwith necessaryscrews etc. complete

250x16x5 mm"

Plant 0

UOM EA

Quantity 4


161



Total Cost

GST in %

GST in Rs.



SAC Code



page 48 of 71


SAP Item No. 410


Short Description . . . AL HANDLE 150MM

Long Description

"Providing and fixing aluminium handles, ISI marked,anodised (anodiccoating not less than grade AC10 asper IS : 1868) transparent or dyedto required colour orshade, with necessary screws etc. complete

150mm"

Plant 0

UOM EA

Quantity 2


60



Total Cost

GST in %

GST in Rs.



SAC Code


SAP Item No. 420




page 49 of 71

Short Description . . . BLD PNT SNOWCEM 2C

Long Description

"Preparing surface and painting of approved make,shade and quality inall heights of walls, ceiling, sunsheds fins etc. incl. providingscaffolding, pitting inplaster to be made good, cleaning with coir brush&sand paper, curing and supply of all materials andlabour complete.The finished surface shall be even anduniform.The application of paintshall conform toManufacturer's recommendation and as per thedirectionsof Enginner-in-Charge.

2 coats of Cement Paint of Snowcem or equivalentmake"

Plant 0

UOM M2

Quantity 1150


48



Total Cost

GST in %

GST in Rs.



SAC Code


SAP Item No. 430




page 50 of 71

Short Description . . . BLD PNT OBD 2C

Long Description

"Preparing surface and painting of approved make,shade and quality inall heights of walls, ceiling, sunsheds fins etc. incl. providingscaffolding, pitting inplaster to be made good, cleaning with coir brush&sand paper, curing and supply of all materials andlabour complete.The finished surface shall be even anduniform.The application of paintshall conform toManufacturer's recommendation and as per thedirectionsof Enginner-in-Charge.

2 coats of Oil Bound Distemper"

Plant 0

UOM M2

Quantity 150


43



Total Cost

GST in %

GST in Rs.



SAC Code


SAP Item No. 440


Short Description . . . ROAD WBM 150 AG63-90



page 51 of 71

Long Description

Supplying and spreading stone aggregate of requiredsize to achieve therequired thickness as mentionedbelow, followed by supplyingandspreading 12 mmdown stone aggregate to fill voids, re-rollingthesamewith 8 - 10 ton roller, followed by supplyingand spreading bindingmaterial of plasticity index upto6% such as murrum or quarry dust orapproved qualityearth, consolidating the same withoptimumwatermoisture till the surface is evenly anddenselyconsolidate to achieve.NOTE : Please note thateach layer of stoneaggregate has to beconsolidated with8 - 10 ton roller. During themurrum filling,wateringshould be done per each run of the rollerandminimum 5 such runs have tobe undertaken onsubgrade. During each suchrun if any void isobservedafter watering the same shall be filledusing1:1mix of 12 mm metal &murrum. The spreading ofbinding material , sprinkling of water, sweepingwith abroom and rolling shall continue until the slurry that isformedwell after filling the voidsformed ahead of thewheels of the movingroller and any undulations inthesurface developed due to rolling shallbe made good.The ratesshould be inclusive of all cost of equipment,material, labour etc.150 mm thick compacted WBMusing stone aggregate ofsize 63-90 mm

Plant 0

UOM M2

Quantity 75


248



Total Cost

GST in %

GST in Rs.



SAC Code



page 52 of 71


SAP Item No. 450



Long Description

Supplying and spreading stone aggregate of requiredsize to achieve therequired thickness as mentionedbelow, followed by supplyingandspreading 12 mmdown stone aggregate to fill voids, re-rollingthesamewith 8 - 10 ton roller, followed by supplyingand spreading bindingmaterial of plasticity index upto6% such as murrum or quarry dust orapproved qualityearth, consolidating the same withoptimumwatermoisture till the surface is evenly anddenselyconsolidate to achieve.NOTE : Please note thateach layer of stoneaggregate has to beconsolidated with8 - 10 ton roller. During themurrum filling,wateringshould be done per each run of the rollerandminimum 5 such runs have tobe undertaken onsubgrade. During each suchrun if any void isobservedafter watering the same shall be filledusing1:1mix of 12 mm metal &murrum. The spreading ofbinding material , sprinkling of water, sweepingwith abroom and rolling shall continue until the slurry that isformedwell after filling the voidsformed ahead of thewheels of the movingroller and any undulations inthesurface developed due to rolling shallbe made good.The ratesshould be inclusive of all cost of equipment,material, labour etc.75 mm thick compacted WBMusing stone aggregate ofsize 45-63mm

Plant 0

UOM M2

Quantity 75


136



Total Cost

GST in %

GST in Rs.



page 53 of 71



SAC Code


SAP Item No. 460



Long Description

Supplying and spreading stone aggregate of requiredsize to achieve therequired thickness as mentionedbelow, followed by supplyingandspreading 12 mmdown stone aggregate to fill voids, re-rollingthesamewith 8 - 10 ton roller, followed by supplyingand spreading bindingmaterial of plasticity index upto6% such as murrum or quarry dust orapproved qualityearth, consolidating the same withoptimumwatermoisture till the surface is evenly anddenselyconsolidate to achieve.NOTE : Please note thateach layer of stoneaggregate has to beconsolidated with8 - 10 ton roller. During themurrum filling,wateringshould be done per each run of the rollerandminimum 5 such runs have tobe undertaken onsubgrade. During each suchrun if any void isobservedafter watering the same shall be filledusing1:1mix of 12 mm metal &murrum. The spreading ofbinding material , sprinkling of water, sweepingwith abroom and rolling shall continue until the slurry that isformedwell after filling the voidsformed ahead of thewheels of the movingroller and any undulations inthesurface developed due to rolling shallbe made good.The ratesshould be inclusive of all cost of equipment,material, labour etc.100 mm thick compacted WBMusing stone aggregate ofsize 45- 63 mm

Plant 0

UOM M2

Quantity 75


176


Unit Rate in Rs. After Discount



page 54 of 71

(Figure)

Total Cost

GST in %

GST in Rs.



SAC Code


SAP Item No. 470


Short Description . . . PREMIX CARPET 25MM

Long Description

ROAD WORKS PRE MIX CARPET 25mm premixcarpet surfacing with 2.25cu.m.respectively per 100 sq.m. and 52 kg. and 56 kg. of hot bitumenper cu.m. ofstone c hippings of 13.2 mm and 11.2 mmsizerespectivelyincluding a tack coat with hot straightrun bitumenincludingconsolidation with road roller of8-10 tonne capacity etc.complete :as per specificationsand directions ofEngineer-in-charge.(tack coat tobepaid for separately). With pavingAsphalt 80/100heated and then mixedwith solvent at the rate of 70gramsper kg. of asphalt.with paving Asphalt 80/100

Plant 0

UOM M2

Quantity 2000


162



Total Cost



page 55 of 71

GST in %

GST in Rs.



SAC Code


SAP Item No. 480


Short Description . . . BITUMEN SEAL COAT 12

Long Description

ROAD WORK: Seal Coat: supplying seal coat usingsand/6mm gritprecoatedwith bitumen & bitumenshould be thoroughlymixed to have uniform mix.Therolling shall be done asexplained above. Rates includecost ofallmaterial, labour, equipment etc.complete.12mm seal coat with bitumen1Kg/Sqm

Plant 0

UOM M2

Quantity 2000


114



Total Cost

GST in %

GST in Rs.




page 56 of 71

(Figures)


SAC Code


SAP Item No. 490


Short Description . . . S/F CHAIN LINK 1.35M

Long Description

ROAD WORKS CHAIN LINK FENCING 1.35m Ht.Supplying anderecting chainlinkfencing 1.35m high onthe angle iron posts atapproximately 2.5m centretocentre embedded in CC 1:3:6as per ourstandarddrawing no E.1S.01.001incl. supplying 3 strands GIbarbed wire12 SWG with 4 points on 0.4mhigh bentarm on top of angle iron postsincl. painting verticalpostwith 2coats each of Red oxide and aluminiumpaint.

Plant 0

UOM M

Quantity 200


824



Total Cost

GST in %

GST in Rs.





page 57 of 71

SAC Code


SAP Item No. 500


Short Description . . . SFE STR STL MANUAL

Long Description

"Supply, fabrication and erection in position; boltedand/or weldedstructural steel works at all levels;including all built-up sections/compound sections madeout of rolled sections and / or platesintrusses; rafters;purlins; wind ties; coloumns; portals; platforms;staircases; (excluding chequered plates, swing ladders,foundation boltsand gratings) ladders; stoppers;brackets sag rods; supports forequipment andaccessories; hand railings posts cutting to requiredsizeas per approved drawings; straightening if requiredbolting/ welding ofjoints (including sealing the jointsof the box sections with continuouswelding whereverspecified) finishing edges by grinding; fixing in lineandlevel with temporary staging and removal of same aftererection;grouting with ordinary grout or non-shrinkgrout as specified; includingpreparation of detailedfabrication drawings, Cost of painting asspecifiedbelow, Complete in all respect as directed byEngineer-in-charge. Cost of nutbolts to be borne by contractor.NOTE :

1. All structural steel shall conform to IS-2062 &IS-808 and ofSAIL/TISCO/IISCO/ JINDAL/ ESSAR/VIZAG STEEL or equivalent make withprior approvalfrom BPCL only.

2. The structure may be Pre-fabricated with boltingarrangements bymaking necessary holes, surfaceprepration by manual cleaning/ wirebrushing etc andpainting except final coat, which will be carriedoutafter completion of the erection works. Min. hotworks will be allowedat site. It is vendorsresponsibility to verify the actual measurementsat sitebefore making the bolting schedule.

3. PAINTING SPECIFICATIONS :

The cost includes surface preparation by manualcleaning/wire brushingetc.

Primer Coat :

After surafce preparationtwo coats surface tolerant epoxy primer @ 125microns

Top Finish Coat :

2 coats of acrylic aliphatic polyeurethene @ 30microns per coat.



page 58 of 71

Total DFT 225 microns minimum.The rate includes the cost of materials, consumables,labour, tools andplants, transportation, loading,unloading, machinery, safety requirents, incidental charges if any, all complete."

Plant 0

UOM KG

Quantity 20000


56



Total Cost

GST in %

GST in Rs.



SAC Code


SAP Item No. 510


Short Description . . . SFE MS GRATING

Long Description

"Supplying, fabricating and erecting in position boltedand/ or weldedMS grating (fabricated as per BPCLstandard drawing) using MS flats inplatforms, staircase, catwalks, treads etc. including cutting torequiredsize, shape, making hole of required size, making theedgessmooth, removing the burrs, manual cleaning/wire brushing etc., PAINTING SPECIFICATIONS :The cost includes surface preparation by manual



page 59 of 71

cleaning/wire brushingetc..Primer Coat :After surafce preparation one coate of inorganic zincsilicate @65microns.Intermediate Coat:One coat of epoxy high built micaceous iron oxide @100 microns.Top Finish Coat :2 coats of acrylic aliphatic polyeurethene @ 30microns per coat.Total DFT 225 microns minimum.The rate includes the cost of materials, consumables,labour, tools andplants, transportation, loading,unloading, machinery, safety requirents, incidental charges if any, all complete."

Plant 0

UOM KG

Quantity 5000


72



Total Cost

GST in %

GST in Rs.



SAC Code


SAP Item No. 520


Short Description . . . ANTIST BITUMASTIC 38

Long Description



page 60 of 71

FLOORING ANTISTATIC MASTIC 38 mm :Providing and laying 38 mm thickAntistatic Bitumasticflooring conforming to Indian standardspecifications(IS:8374 - 1977) and Indian standard code for layingofBitumastic floorings (IS:1196 - 1973) includingmaking the surfacesmooth as directed by the Engineer-in-Charge and having materialspecifications andpositions as given : Bitumen (90/15 or 75/15Grade)-13to 18% Carbon Black of the conductive grade likeGraphite-5 to7% Stone Dust (Clean) - 30% Stone Grit(Max. 6 mm size) - 20% Lime Dust(80 to 90%Calcium) -30%

Plant 0

UOM M2

Quantity 1200


892



Total Cost

GST in %

GST in Rs.



SAC Code


SAP Item No. 530


Short Description . . . ANTIST BITUMASTIC 15

Long Description

FLOORING ANTISTATIC MASTIC 15 mm :Providing and laying 15 mm thickAntistatic Bitumastic



page 61 of 71

flooring conforming to Indian Standardspecifications(IS:8374 - 1977) and Indian standard code of Practiceforlaying on the vertical faces of columns includingmaking the surfacesmooth as directed by the Engineer-in-Charge and having materialspecifications andpositions as given : Bitumen (90/15 or 75/15Grade)-13to 18% Carbon Black of the conductive grade likeGraphite-5 to7% Stone Dust (Clean) - 30% Stone Grit(Max. 6 mm size) - 20% Lime Dust(80 to 90%Calcium) -30%

Plant 0

UOM M2

Quantity 50


569



Total Cost

GST in %

GST in Rs.



SAC Code


Tender Document...AD 500 004 7 emkay trading co emkaytradingco @gmail.com 0000151675 a-46, bapu...

Documents

Transcript of Tender Document...AD 500 004 7 emkay trading co emkaytradingco @gmail.com 0000151675 a-46, bapu...