Temporary fasteners and associated tooling - ITP · Temporary fasteners and associated tooling ... ...

Issue 05Issue 05Issue 05---2009 Rev. C2009 Rev. C2009 Rev. C

Temporary fasteners Temporary fasteners and associated toolingand associated tooling

BLANC AERO INDUSTRIESBLANC AERO INDUSTRIESTour gamma “A”Tour gamma “A”193, rue de 193, rue de BercyBercy75582 Paris 75582 Paris CedexCedex 1212Phone : (33) 01 44 67 85 85Phone : (33) 01 44 67 85 85Fax : (33) 01 44 67 67 33Fax : (33) 01 44 67 67 33Web site: Web site: www.www.lisilisi--aerospace.comaerospace.comemail: tool.division@email: [email protected]

BLANC AERO INDUSTRIESBLANC AERO INDUSTRIESPlantPlantZA La ZA La LandetteLandette18500 Vignoux sur Barangeon18500 Vignoux sur BarangeonPhone. : (33) 02 48 52 96 96Phone. : (33) 02 48 52 96 96Fax : (33) 02 48 52 96 97Fax : (33) 02 48 52 96 97

2Issue May 2009 – Rev. C

M.Roussy

Plunger types or lead thread standard temporary fasteners allow Plunger types or lead thread standard temporary fasteners allow the prethe pre--assembly of all kind of assembly of all kind of material elements. Spring loaded or not, they are designed for ematerial elements. Spring loaded or not, they are designed for efficient clamping in rubber sealant fficient clamping in rubber sealant or resin applications.or resin applications.

Special high performance temporary fasteners answer to particular requirements such as :- Large diameters

- Hard tool holding

- Wide structure thickness

- Clamping through hard tool bushings

A complete range of standard or special tools ensure adjustable pre-loads of the assembly as well as access in confined areas.

DescriptionDescription

The 18000 sq.ft plant of Vignoux- sur-Barangeon

Bourges

Toulouse

Bordeaux

Nantes

Paris

Toulon

LocationLocation


Together with our R&D Center, global analysis of drilling issues, pre-assembly, selection and installation of fasteners.

Use of Solidworks CAD and Cosmosworks for stress analysis (finite element calculation).

Design Development

Our manufacturing workshops utilize all the necessary processes for the manufacturing of each material component.

The benefit from the most modern equipments: CAD, CD turning-lathes, presses, heat treatment furnaces, test benches.

Manufacturing

Each material is strictly tested by our personnel at every step of the manufacturing process and prior to delivery.

The plant of Vignoux-sur-Barangeon is certified ISO 9001 version 2000 and en 9100.

We also undertake the maintenance of hydraulic and pneumatic materials as well as the reconditioning of temporary fasteners.

Control, storage, delivery, product support

The aerospace fasteners sold by LISI AEROSPACE benefit from the support of the Technical Field Support department (TFS) which offers regular presence on-the-spot.

More than 30 years of experience and industrial partnership

Technologies

EDM wire machining

Milling

Turning

Grinding

Heat treatment

Assembly


[ SERIES AND MODELS ][ SERIES AND MODELS ]

� Series 1000 et 1100 …… p 11-12Plunger typesSpring loaded plunger type fastener used to clamp low thickness parts. installed with simple hand pliers or pneumatic pliers

� Series 1200 et 1300 …… p 13Plunger typesSpring loaded plunger type fastener used to clamp low thickness parts. installed with simple hand pliers or pneumatic pliers

� Series 20 ……………………….. p 14Lead thread typeHand operated by means of a knurled nut. Used for simple assembly work as en series 1000/1100

� Series 22 ……………………….. p 15-16

Lead thread typePower operated temporary fastener with cylindrical driving nut. Used for simple assembly work as en series 1000/1100

� Series 25 ……………………….. p 17-18

Lead thread typePower operated temporary fastener with hex driving nut. Used forsimple assembly work as en series 1000/1100

� Series 26 ……………………….. p 19-20

Lead thread type – spring loaded (spring 60daN)Power operated temporary fastener. Low profile and low thickness for rubber sealant applications

� Series 27 ………………………... p 21-22


SummarySummary


� Series 28 ……………………… p 23-25


� Series 29 ……………………… 26-27

Lead thread type – spring loaded (spring 20daN)Power operated temporary fastener. Low profile and low thickness for rubber sealant applications. Teflon sleeve covered for resin applications

� Series 30 ……………………… p 28-29

Lead thread type – hex driving nutFor same applications than series 25 but wider thickness

� Series 30G …………………… p 30-31

Lead thread type – hex driving nutPower operated temporary fastener. Special for hard tool positioning and clamping

� Series 31 ……………………… p 32-33

Lead thread type – hex driving nutFor same applications than series 30 but thinner and lower profile, used through hard tools bushing

� Series 32 ……………………… 34-36

Lead thread type – cylindrical driving nutFor same applications than series 22 but wider thickness. High clamping forces and large grip capacity

� Series 32G …………………... p 37-38

Lead thread type – cylindrical driving nutPower operated temporary fastener. Special for hard tool positioning and clamping

SummarySummary


� Series 35 ……………….. p 39-41

Lead thread type – miniature not spring loadedPower operated temporary fastener. Very short and variable overall body length and special effectiveness en more confined area

� Series 351 ……………… p 42-44Lead thread type – not spring loadedPower operated temporary fastener. Short but constant overall body length (45mm). Special for the elements positioning and clamping

� Series 352 ……………… p 45-46

Lead thread type – not spring loadedPower operated temporary fastener. Special for hard tool positioning and clamping. Used with “concentric collet” type drilling machines

� Series 353 ……………… p 47-48

Lead thread type – not spring loadedPower operated temporary fastener. Used through hard tools bushing in association with series 352

� Series 356 ……………… p 49-50Lead thread type – not spring loadedPower operated temporary fastener. Flush temporary fastener (reduce volume) intended for elements clamping through hard tool.

� Series 36 ………………… p 51-52Lead thread type – not spring loadedPower operated temporary fastener. Mini temporary fastener called “marking” for positioning robot-end-effector

� Series 37 ………………… p 53-54Lead thread type – spring loaded. High clamping

performancePower operated temporary fastener. Reduce volume design for being installed and removed in a confined area. Same compensation device than series 54.

SummarySummary


SommaiSommairereSummarySummary

� Series 41 ………………………………. p 55-56

Lead thread type – spring loaded – hex driving nutPower operated temporary fastener. Same advantages than series 30 but equipped with spring loaded for rubber sealant application

� Series 42 ………………………………. p 57-58

Lead thread type – spring loaded – cylindrical driving nutPower operated temporary fastener. For same applications than series 41 but equipped with a cylindrical driving nut

� Series 42S / 42S G / 42S ET… p 59-60

Lead thread type – spring loaded – cylindrical driving nutPower operated temporary fastener. For same applications than series 42 with an optimized cap for hard tool’s clamping

� Series 43 ………………………………… p 61-62

Lead thread type – spring loaded – hex driving nutPower operated temporary fastener called “marking” for positioning robot-end-effector

� Series 44 ………………………………… p 63-64

Lead thread type – cylindrical driving nutPower operated temporary fastener. Special for resin leveling applications en composite material that require low calibrated (± 5%) clamping load. fastener controls tool air shut-off

� Series 44H ……………………………… p 65-66

Lead thread type – hex driving nutSame as series 44 but driver controls clamping load

� Series 45G ……………………………… p 67-68

Lead thread type – spring loaded - cylindrical driving nutPower operated temporary fastener. Special for hard tool positioning and clamping



� Series 45GH ………………. p 69-70

Lead thread type – spring loaded - hex driving nutPower operated temporary fastener. Special for hard tool positioning and clamping

� Series 49 / 49H …………. p 71-73

Lead thread type – spring loaded. High clamping forceUsed for rubber sealant applications. H version has hex driving nut.

� Series 49G / 49GH ……… p 71-76

Lead thread type – spring loadedPower operated temporary fastener. High clamping force. Special for hard tool positioning and clamping

� Series 50 …………………….. p 77-78

Lead thread type – no spring loadedPower operated temporary fastener. High clamping force

� Series 51 …………………….. p 79-80

Lead thread type – spring loadedPower operated temporary fastener used for rubber sealant application. Teflon sleeve covered when used for resin application

� Series 52 …………………….. p 81-83

Lead thread type – spring loadedPower operated temporary fastener used for rubber sealant application. High clamping force. Used en association with series 70

� Series 53 ………………………….. p 84-85

Lead thread type – spring loaded – c-sink capPower operated temporary fastener used for rubber sealant application. High clamping force. Used in c-sink holes



� Series 54 ………………………….. p 86-87

Lead thread type – spring loadedPower operated temporary fastener. Short and variable overall body length and special effectiveness through hard tool bushings. For rubber sealant applications

� Series 55 M / R or ET ……… p 88-91

Lead thread type – spring loadedSame as series 54 but grippers can be Teflon sleeve covered for resin applications

� Series 58 …………………………... p 92

Lead thread type – spring loaded – cylindrical driving nut and bodyHybrid temporary fastener, cylindrical design and hex lock. Sameadvantages as series 42 with incorporated spring. Installation and removal is performed by a roller bearing drive system.Optimized bearing area decreases material damages. The removable end washer ensure the reparability of the temporary fastener.

� Series 60 …………………………... p 93-94

Lead thread type Operated by robot-end-effector

� Series 70 …………………………… p 95-96

Lead thread type – spring loaded – cylindrical driving nut Power operated temporary fastener. Special for hard tool positioning and clamping

� Series 81 …………………………………… p 97-98

Lead thread type – spring loaded Power operated temporary fastener. High clamping force. For rubber

sealant applications



� Series CCTF / CCTFH ……….. p 99-100

Lead thread type – spring loaded High clamping force. Calibrated for “concentric collet” system. Bearing area is optimized on 4 jaws.

� Series R / RG……………………….. p 101-103

Lead thread type – spring loaded Double threaded rod for a quick installation and removal. For rubber sealant application. Grippers can be Teflon sleeve covered for resin applications.

� Series M / MG……………………….. p 101-103

Lead thread type – spring loaded Double threaded rod for a quick installation and removal. For rubber sealant application. Grippers can be Teflon sleeve covered for resin applications.


Series1000-1100

Temporary fastenersTemporary fastener

Plunger type

• Features: The series 1000-1100 sheet holder clamp is the standard pliers-actuated-clamp, spring loaded in a plastic body; it is effective for most space requirements. clamping force max. : 20 daN.

• Sizes: Diameters, colors and grip are defined in the chart below.

• Weight : Kg/1000 parts = 8 Kg.

Dimensions in mm

Presentation

Part number example

Series 1000

Series 1100

10 32

Diameter code in 1/10 mm

First 2 digits of series number10 for series 100011 for series 1100

Series 1000Red plunger

Series 1100Whitte plunger

0 - 6,5 6,5 - 13

YellowRed

Brow nGreyGreenBlueWhiteGreenBrow n

Plastic body color

6,3

3,03,2

3,5 / 3,64,04,85,6

Grip range

Drill diameter

2,02,4 / 2,5


Pneumatic pliers :Supply : lubricated air at 85 PSI max.

Manual pliers Part No. 041

Series1000-1100

Installation tooling

Part No. PPA-013-DStraight type

Part No. PPA-013-E90° angle type

Part No. PPA-013-O105° angle type

Temporary fastenerPlunger type


Series1200-1300

Temporary fasteners

• Features: The series 1200-1300 sheet holder clamp is the standard pliers-actuated-clamp, spring loaded in a metallic body ; it is effective for most space requirements. clamping force max. : 20 daN.



Dimensions in mm

Presentation

Part number example

Series 1200

Series 1300

12 56


First 2 digits of series number12 for series 120013 for series 1300

Series 1200 Series 1300Black 5,6 5,6

Bronze 6,3 6,3

Grip 0 - 6,5 6,5 - 13

Hole diameterBody color

Temporary fastenerPlunger type


Series 20 Temporary fasteners

Temporary fastener Threaded type

Knurled driving nut

• Features: Temporary fastener with hand operated by means of a knurled nut intended for regular assembly.



Dimensions in mm

Presentation

Part number example

20 32


Series number

nominal mini maxi mini maxiRed 2,4 2,40 2,50 0 9

Brow n 3,0 2,90 3,00 0 9Grey 3,2 3,20 3,35 0 9Green 3,6 3,50 3,70 0 9Blue 4,1 4,00 4,20 0 9White 4,8 4,70 5,00 0 9Red 5,6 5,50 5,80 0 9Grey 6,3 6,20 6,50 0 9

Hole diameterBody color

Grip


Series 22Temporary fasteners

• Features: Power operated clamping fastener with cylindrical driving nut and reinforced grippers for high clamping force applications in confined area. Standard grip : from 0 - 9 mm.


• Preload control device. Part No.: ACP-040.


Dimensions in mm

Presentation

22 32


Serial number

Part number example

Red 2,4 / 2,5 100Brow n 3,0 200Grey 3,2 200Green 3,5 / 3,6 200Blue 4,0 250White 4,8 / 5 250Red 5,6 250

Brow n 5,8 / 6,0 250Grey 6,3 250

Body color Hole diameterClamping force

max. ( daN )


Cylindrical driving nut


• Driver with automatic stop by air shut-off.

• High accuracy of clamping.

• Reaction torque is hold by the hex of the temporary fastener’s body.

• Driver’s nose ensure the removal of the temporary fastener by a 1/12 of a turn.

In addition to the drivers depicted in the table below, specific installation tools can be manufactured upon request.

Series 22Installation tooling

Presentation



90° angle type driver

A B C Ø D Ø E(mm) (mm) (mm) (mm) (mm)

VPA 32 27 D1 10 0,6 - 4 N.m 289 74,5 184 35 22,5

TorquePart No.


VPA 32 17 E1 10 0,5 - 3 N.m 260 51 112 33 24

Part No. Torque

Part number example VPA 32 27 D 1 � 10Nut diameterVersion No.(E) Angle style(D) Straight type(2) Torque range(7) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener

Straight type driver



• Features: Power operated clamping fastener with hex driving nut and reinforced grippers for high clamping force applications in confined area. Standard grip : 0 - 9 mm.




Dimensions in mm

Presentation

Temporary fastenerThreaded typeHex driving nut

Part number example

25 32


Series number

Red 2,4 / 2,5 100Brow n 3,0 200Grey 3,2 200

Green 3,5 / 3,6 200Blue 4,0 250White 4,8 / 5 250Red 5,6 250

Brow n 5,8 / 6,0 250Grey 6,3 250


max. ( daN )









Presentation



VPA 25 27 D1 10 0,6 - 4 N.m 296 82 184 35 19,5

Part No. Torque

Part number example

VPA 25 27 D 1 � 10Nut diameterVersion No.(E) Angle type(D) Straight type(2) Torque range(7) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener



• Features: intended for pre assembly of weak thickness elements with a spring loaded for rubber rubber sealant application in confined area.



Dimensions in mm

Presentation

Temporary fastenerThreaded type

Spring loaded 60 daN

Part number example

mini maxiRed 3,2 2 9 74,5Red 3,2 5 12 77,5

White 4,0 2 9 75,0

Body color Hole diameter AGrip

26 032 05-12

Grip capacity


Series number


Series 26 Installation tooling

Foot type driver

Presentation

*: Driver with nose indexation device.

Part number exampleVPA 26 17 P 1 � 9

Nut diameterVersion No.

(P) Foot type

(1) Torque range(7) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener

A B C D E(mm) (mm) (mm) (mm) (mm)

VPA 26 27 P1 9 0,6 - 4 N.m 243 40 184 100 20,5

Part No. Torque








A B C D E F(mm) (mm) (mm) (mm) (mm) (mm)

VPA 26 17 P1 9 0,5 - 3 N.m 294 40 60 60 20,5 32VPA 26 17 P2 9* 0,5 - 3 N.m 264 40 89 60 20,5 32

Part No. Torque



• Features: intended for pre assembly of weak thickness elements with a spring loaded for rubber sealant application in confined area.



Dimensions in mm

Presentation

Part number example

mini maxiBlack 2,5 2 9 74,0Red 3,2 5 12 77,5


27 025 02-09

Grip capacity


Series number



Yellow



Foot type driver

Presentation


Nut diameterVersion No.

(P) Foot type

(1) Torque range(7) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener

A B C D E(mm) (mm) (mm) (mm) (mm)

VPA 26 27 P1 9 0,6 - 4 N.m 243 40 184 100 20,5

Part No. Torque








*: Driver with nose indexation device.


VPA 26 17 P1 9 0,5 - 3 N.m 294 40 60 60 20,5 32VPA 26 17 P2 9* 0,5 - 3 N.m 264 40 89 60 20,5 32

Part No. Torque



• Features: intended for pre assembly of weak thickness elements with a spring loaded for rubber sealant application in confined area. Grip capacity : 2 - 9 mm.



Dimensions in mm

Presentation

Part number example 28 040 02-09

Grip capacity


Series number



min maxRed 3,2 2 9 74,5Red 3,2 5 12 77,5

White 4,0 2 9 75,0White 4,0 9 16 81,5

Yellow 4,8 2 9 76,0Black 5,6 2 9 76,0Green 5,8 5 12 79,5Green 5,8 13 20 87,5Brow n 6,3 2 9 76,0

Plastic body color Hole diameter AGrip range



Presentation


VPA 28 27 D1 09 0,6 - 4 N.m 265 58 184 31 16,5

Part No. Torque

Part number example VPA 28 27 D 1 � 09Nut diameterVersion No.(E) 90° angle type(D) Straight type(P) Foot type(2) Torque range(7) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener


VPA 28 17 E1 09 0,5 - 4,5 N.m 270 58 123 31 16,5

Part No. Torque












Foot type driver

Presentation

Part number example

VPA 28 17 P 1 � 09Nut diameterVersion No.(E) 90° angle type(D) Straight type(P) Foot type(1) Torque range(7) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener


VPA 28 17 P1 09 0,5 - 4,5 N.m 294 40 80 60 20,5 32

Part No. Torque










• Features: Grippers covered with Teflon sleeve - intended for pre assembly of weak thickness elements in confined area with a spring loaded for carbon / carbon assembly with liquid shim between element.

•Sizes: Diameters, colors and grip are defined in the chart below.


Dimensions in mm

Presentation


Spring loaded 20 daNTeflon Sleeve over grippers


Grip capacity


Series number

min maxRed 3,2 2 9 74,5Red 3,2 7 14 79,5Red 3,2 12 19 84,5

White 4,1 2 9 74,5White 4,1 7 14 79,5White 4,1 12 19 84,5

Plastic body color Hole diameter

Grip rangeA



Foot type driver

Presentation

Part number example

VPA 29 17 P 1 � 09Nut diameterVersion No.(E) 90° angle type(D) Straight type(P) Foot type(1) Torque range(7) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener


VPA 29 17 P1 09 0,2 N.m 294 40 60 60 20,5 32

Part No. Torque


Spring loaded 20 daNTeflon Sleeve over grippers








• Features: Installation / removal via pneumatic tooling – Reinforced grippers for simple assemblies. Standard grip capacity : 0 - 15 mm.




Dimensions in mm

Presentation


Part number example

30 32


Series number

Black 2,4 / 2,5 100 1Pink 3,0 100 1Red 3,2 200 1Blue 3,5 / 3,6 200 1White 4,0 250 1Yellow 4,8 / 5 350 2Black 5,6 350 2Green 5,8 / 6,0 350 2Brow n 6,3 350 2


max. ( daN )Driver code

advised




Presentation

Part number example









1 VPA 25 27 D1 10 0,6 - 4 N.m 296 82 184 35 19,52 VPA 25 37 D1 10 3,5 - 10 N.m 319 82 184 35 19,5

Part No. TorqueDriver code


Series 30G Temporary fasteners

• Features: Specially designed to quickly “position” and “center” template.




Dimensions in mm

Presentation


Drill jig positioning

Part number example

3,2 200 100 28 3 9,5 15,83,2 200 100 28 3 12,7 15,86,3 200 100 28 3 9,5 15,86,7 200 106 28 3 9,5 15,87,2 200 106 28 3 12,7 15,8

Hole diameter

Clamping force max. ( daN ) A C D G H

30G 32 95 28 30 45

Grip max.

Grip min.

Guiding area lenght C in mm

Guiding diameter code G in 1/10 mm


Series number


Series 30G Installation tooling

Presentation


VPA 3027 D1 10 0,6 - 4 N.m 289 75,0 184 35 19,5

Part No. Torque


VPA 30 17 E1 10 0,5 - 3 N.m 258 56 113 29 16,5

Part No. Torque

Part number example VPA 30 27 D 1 � 10Nut diameterVersion No.(E) Angle type(D) Straight type(2) Torque range(7) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener












• Features: Temporary fastener specially designed to “center” template. Arise of the series 30, it is shorter, thinner and embedded in the bushes of the drilling jigs.Standard grip capacity : 8 - 18 mm.



Dimensions in mm

Presentation


Grip capacity


Series number


Min MaxWhite 4,0 8 18 250White 4,0 16 26 250

Yellow 5,1 8 18 350Green 6,0 8 18 350Green 6,0 16 26 350Brow n 6,3 8 18 350

Cap color Hole diameter Max pre-load ( daN )Grip range



Presentation

Part number example


VPA 31 17 D1-9 0,9 - 10 N.m 285 64,5 247 32 14,6

Part No. Torque

VPA 31 17 D 1 � 9Nut diameterVersion No.(D) Straight type(1) Torque range(9) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener



• Battery Driver with automatic stop by means of a clutch.







Dimensions in mm

Presentation

Part number example

• Features: Installation/removal via pneumatic tooling with cylindrical driving nut, reinforced grippers, large grip capacity and high clamping force for simple assemblies.




32 60 00-15

Grip capacity


Series number



Black 2,4 / 2,5 100 1-3Pink 3,0 100 1-3Red 3,2 200 1-3Blue 3,5 / 3,6 200 1-3White 4,0 250 1-3Yellow 4,8 / 5 350 2-4Black 5,6 350 2-4Green 5,8 / 6,0 350 2-4Brow n 6,3 350 2-4


max. ( daN )Driver code

advisedMin Max

Black 2,4 / 2,5 0 15 100Pink 3,0 0 15 150Red 3,2 0 15 150Blue 3,5 / 3,6 0 15 150White 4,0 0 15 250

Yellow 4,8 / 5 0 15 350Black 5,6 0 15 350Green 5,8 / 6,0 0 15 350Brow n 6,3 0 15 350

Plastic body color Hole diameter Max pre-load (daN)Grip range



Presentation

Part number example VPA 32 27 D 1 � 10Nut diameterVersion No.(E) 90° angle type(D) Straight type(P) Foot style(2) Torque range(7) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener











1 VPA 32 27 D1 10 0,6 - 4 N.m 289 74,5 184 35 22,52 VPA 32 37 D1 10 3,5 - 10 N.m 312 74,5 184 35 22,5

Driver code Part No. Torque


3 VPA 32 17 E1 10 0,5 - 3 N.m 260 51 112 33 24




Foot type driver

Presentation


Nut diameterVersion No.(E) 90° angle type(D) Straight type(P) Foot type(1) Torque range(7) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener









4 VPA 32 17 P1 10 2,5 - 7 N.m 380 59,5 30 52 23,5 30




Dimensions in mm

Presentation

Part number example

• Features: Installation/removal via pneumatic tooling with cylindrical driving nut, reinforced grippers, large grip capacity. It ensure the guiding and positioning of a drilling jig.




Cylindrical driving nutDrill jig positioning

32G 40 17 15 17 32

Grip max.

Grip min.

Guiding area lenght A in mm



Series number

Min. Max.3,9 17 22 12 5 22 12 1-34,0 17 32 15 3 22 17 1-34,6 17 32 15 3 24 20,2 2-34,8 22 34 22 7 20 14 2-36,3 22 34 22 7 20 14 2-3

Ø D Ø G Driver code advised

Hole diameter Grip A B



Presentation

Part number example VPA 32 27 D 1 � 10Nut diameterVersion No.(E) 90° angle type(D) Straight type(P) Foot type(2) Torque range(7) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener











1 VPA 32 27 D1 10 0,6 - 4 N.m 289 74,5 184 35 22,52 VPA 32 37 D1 10 3,5 - 10 N.m 312 74,5 184 35 22,5



3 VPA 32 17 E1 10 0,5 - 3 N.m 260 51 112 33 24




Dimensions in mm

Presentation • Features: Reduced volume specially designed for reduced access area. Anti adhesive coating applied on gripper for ease cleaning and for increasing the life cycle for rubber sealant application.



Temporary fastenerLow profile threaded type

Not spring loaded

Part number example35 063 10-25

Grip capacity


Series number

Min. Max.Threaded

rod body Min. Max.Threaded

rod body

3,20 7 15 45 20 12 19 2-3-13 6,31 30 50 96 35 12 19 2-3-134,00 0 20 67 35 12 19 2-3-13 7,81 10 35 84 40 12 19 44,00 10 30 76 35 12 19 2-3-13 7,90 5 25 69 35 12 19 2-3-9-134,00 14 22 52 20 12 19 2-3-13 7,90 10 25 59 25 12 19 2-3-9-134,00 18 26 54 20 12 19 2-3-13 7,90 10 35 85 40 12 19 2-3-9-134,72 0 20 65 35 12 19 2-3-13 7,90 18 26 55 20 12 19 2-3-9-134,80 5 8 32 15 10 16 1-7 8,00 30 50 97 35 12 19 2-3-9-134,80 5 25 69 35 12 19 2-3-13 9,38 10 30 79 35 16 23 6-10-144,80 7 16 41 19 10 16 8 9,49 5 25 72 35 16 23 6-10-145,00 0 20 75 40 12 19 4 9,49 10 30 79 35 16 23 6-10-145,00 10 30 75 35 12 19 2-3-13 10,97 15 40 95 40 16 23 6-10-146,00 0 20 67 35 12 19 2-3-13 11,08 15 40 95 40 16 23 6-10-146,00 5 25 74 35 12 19 2-3-13 11,08 10 30 78 35 16 23 6-10-146,00 10 30 77 35 12 19 2-3-13 11,08 30 50 98 35 16 23 6-10-146,00 10 35 87 40 12 19 4 11,10 20 26 58 20 15 22 56,00 20 26 58 20 12 19 2-3-13 12,55 10 40 99 45 16 23 6-10-146,00 20 40 87 35 12 19 2-3-13 12,67 10 40 99 45 16 23 6-10-146,00 30 50 103 40 12 19 4 12,67 30 50 98 35 16 23 6-10-146,00 37 46 76 20 12 19 2-3-13 12,70 37 46 76 20 15 22 56,30 14 22 52 20 12 19 2-3-13 12,70 48 55 86 20 15 22 56,30 10 25 59 25 12 19 2-3-13 14,24 20 40 88 35 20 27 116,31 5 25 69 35 12 19 2-3-13 15,83 20 40 94 40 24 31 126,31 10 30 76 35 12 19 2-3-13 15,83 45 65 119 40 24 31 126,31 20 40 86 35 12 19 2-3-13

Driver code advised

A BE / across

flatF / across

flatE / across

flatF / across

f lat Hole diameter GripDriver code

advised

Hole diameter Grip A B



Presentation

Part number example



Not spring loaded








1 VPA 35 27 D1 10 0,6 à 4 N.m 270 56 184 35 23,32 VPA 35 27 D1 12 0,6 à 4 N.m 272 58 184 35 253 VPA 35 18 D1 12 1,2 à 4,5 N.m 310 58 177 35 254 VPA 35 27 D2 12 0,6 à 4 N.m 272 58 184 35 255 VPA 35 27 D1 15 0,6 à 4 N.m 272 58 184 36 296 VPA 35 18 D1 16 2,4 à 6 N.m 310 58 177 38 317 VPA 35 37 D1 10 3,5 à 10 N.m 293 56 184 35 23,38 VPA 35 37 D2 10 3,5 à 10 N.m 293 56 184 35 23,39 VPA 35 37 D1 12 3,5 à 10 N.m 295 58 184 35 25

10 VPA 35 37 D1 16 3,5 à 10 N.m 295 58 184 38 3111 VPA 35 37 D1 20 3,5 à 10 N.m 295 58 184 35 4212 VPA 35 37 D1 24 3,5 à 10 N.m 300 62 184 47,5 40,5




Presentation

Part number example

VPA 35 12 E 1 � 12Nut diameterVersion No.(E) Angle type(D) Straight type(1) Torque range(2) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener


Not spring loaded








13 VPA 35 12 E1 12 2 - 5,5 N.m 314 58 134 35 2514 VPA 35 12 E1 16 1,5 - 5 N.m 317 58 134 38 31




Dimensions in mm

Presentation • Features: Reduced volume (constant clamped height of 45 mm), designed for reduced access area and intended for positioning and clamping.




Not spring loaded


Grip capacity


Series number

Min. Max.4,1 5 30 88 19 19 12 Alu4,1 10 35 93 19 19 12 Alu

4,72* 5 30 89 19 19 12 Alu4,78 5 30 89 19 19 12 Alu

5 5 30 89 19 19 12 Alu5 5 30 89 19 19 12 Purple5 10 35 94 19 19 12 Purple5 30 55 112 19 19 12 Alu6 5 30 87 19 19 12 Alu6 30 55 112 19 19 12 Alu

6,2 5 30 89 19 19 12 Green6,2 10 35 89 19 19 12 Green6,2 30 55 114 19 19 12 Green

6,23* 5 30 89 19 19 12 Alu6,23* 35 60 120 19 19 12 Alu6,3 5 30 89 19 19 12 Bronze6,31 5 30 89 19 19 12 Alu6,31 30 55 113 19 19 12 Alu7,81* 5 30 88 19 19 12 Alu7,9 5 30 88 19 19 12 Alu7,9 5 30 88 19 19 12 Yellow7,9 30 55 113 19 19 12 Alu8,1 25 50 110 19 19 12 Alu8,1 35 60 120 19 19 12 Alu8,1 105 130 190 19 19 12 Alu8,2 15 40 100 19 19 12 Black

9,38* 10 35 93 23 23 16 Alu9,38* 35 60 120 23 23 16 Alu9,49 10 35 93 23 23 16 Alu9,49 35 60 118 23 23 16 Alu9,5 10 35 93 23 23 16 Green9,5 15 40 98 23 23 16 Green

Grip A Ø F H I Cap color

Hole diameter Min. Max.

9,52 15 40 98 23 23 16 Alu10,1 36 60 120 23 23 16 Purple10,8 39 65 125 23 23 16 Blue

10,97* 10 35 95 23 23 16 Alu10,97* 35 60 120 23 23 16 Alu11,08 10 35 95 23 23 16 Alu11,08 35 60 120 23 23 16 Alu11,1 15 40 100 23 23 16 Black11,1 25 50 110 23 23 16 Black12,1 25 50 111 23 23 16 Orange12,1 45 70 131 23 23 16 Orange12,6* 10 35 96 23 23 16 Alu12,6* 35 60 118 23 23 16 Alu12,67 10 35 96 23 23 16 Alu12,67 35 60 121 23 23 16 Alu12,7 0 25 85 23 23 16 Alu12,7 15 40 100 23 23 16 Alu12,7 25 50 110 23 23 16 Alu12,8 60 85 145 23 23 16 Purple

14,12* 10 35 96 27 27 20 Alu14,12* 35 60 121 27 27 20 Alu14,25 10 35 93 27 27 20 Alu14,25 35 60 121 27 27 20 Alu14,25 60 85 146 27 27 20 Alu14,3 5 30 91 27 27 20 Blue14,3 25 50 111 27 27 20 Blue14,8 65 90 151 27 27 20 Green15,9 20 45 106 31 31 24 Red15,9 45 70 131 31 31 24 Red17,2 80 105 166 31 31 24 Yellow18,8 100 125 186 31 31 24 Bronze19,1 25 50 111 31 31 24 Blue

IH Cap color

Grip A Ø FHole diameter

* : Copper Threaded rod/gripper



Presentation

Part number example

VPA 351 D H 5 � 8,2 A(A) Atlas / (i) Ingersoll(5 - 8,2) Dia. of temporary fastener(H) Hex nut

(E) Angle type(D) Straight typeSeries No. of temporary fastenerDriver for temporary fastener


Not spring loaded







Part numbers contained in this list are LISI AEROSPACE part numbers.

Some customers have created their own internal part numbers. Contact us


VPA 351DH 4,1-8,2i 1,2 - 4,5 N.m 295 58 177 35 25VPA 351DH 5-8,2 A 0,6 - 4 N.m 273 58 184 35 25VPA 351DH 5-8,2 i 1,2 - 4,5 N.m 295 58 177 35 25

VPA 351DH 9,5-12,8 A 0,6 - 4 N.m 273 58 184 38 31VPA 351DH 9,5-12,8 i 2,4 - 6 N.m 295 58 177 38 31

VPA 35 18 D1 12 1,2 - 4,5 N.m 310 58 177 35 25VPA 35 18 D1 16 2,4 - 6 N.m 310 58 177 38 31

VPA 351DH 14,3-14,8 A 3,5 - 12,5 N.m 287 58 184 42 35VPA 351 DH 15,9-19,1 A 3,5 - 12,5 N.m 292 62 184 47,5 40,5

Part No. Torque


Presentation

Part number example


VPA 35 12 E 1 � 16Nut diameterVersion No.(E) Angle type(D) Straight type(1) Torque range(2) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener


Not spring loaded










VPA 35 12 E1 12 2 - 5,5 N.m 314 58 134 35 25VPA 35 12 E1 16 1,5 - 5 N.m 317 58 134 38 31

Part No. Torque



Dimensions in mm

Presentation • Features: Reduced volume, designed for being embedded into drilling jig. intended for installation and positioning of the drilling jigs for “Concentric Collet” machines.



Part number example

Min. Max. Min. Max.3,20 2 8 32 43 15,875 20,5 16 9,25 Red3,20 7 13 41 52 15,875 20,5 16 9,25 Red3,20 13 19 50 61 15,875 20,5 16 9,25 Red4,10 2 8 33 44 15,875 20,5 16 9,25 Alu4,10 8 14 42 53 15,875 20,5 16 9,25 Alu4,10 14 20 51 62 15,875 20,5 16 9,25 Alu4,10 20 25 60 71 15,875 20,5 16 9,25 Alu4,80 2 8 32 43 15,875 20,5 16 9,25 Yellow4,80 7 13 41 52 15,875 20,5 16 9,25 Yellow4,80 13 19 50 61 15,875 20,5 16 9,25 Yellow5,60 0 5 28 39 15,875 20,5 16 9,25 Orange5,60 5 11 37 48 15,875 20,5 16 9,25 Orange5,60 10 16 46 57 15,875 20,5 16 9,25 Orange5,60 16 22 55 66 15,875 20,5 16 9,25 Orange6,30 0 6 29 40 15,875 20,5 16 9,25 Bronze6,30 5 11 38 49 15,875 20,5 16 9,25 Bronze6,30 11 17 47 58 15,875 20,5 16 9,25 Bronze6,30 17 23 56 67 15,875 20,5 16 9,25 Bronze6,30 22 28 65 76 15,875 20,5 16 9,25 Bronze6,30 28 34 74 85 15,875 20,5 16 9,25 Bronze7,92 4 10 36 47 25,400 33,0 26 12,90 Yellow7,92 10 16 45 56 25,400 33,0 26 12,90 Yellow7,92 15 21 54 65 25,400 33,0 26 12,90 Yellow9,52 5 11 38 48 28,575 45,0 26 14,80 Green9,52 10 16 46 56 28,575 45,0 26 14,80 Green9,52 15 21 54 64 28,575 45,0 32 14,80 Green9,52 22 26 62 72 28,575 45,0 32 14,80 Green11,10 8 14 43 53 31,000 45,0 32 14,80 Black11,10 14 19 51 61 31,000 45,0 32 14,80 Black11,10 19 24 59 69 31,000 45,0 32 14,80 Black11,10 24 29 67 77 31,000 45,0 32 14,80 Black11,10 29 34 75 85 31,000 45,0 32 14,80 Black12,70 8 14 43 53 33,400 48,0 38 19,40 Alu12,70 14 19 51 61 33,400 48,0 38 19,40 Alu12,70 19 24 59 69 33,400 48,0 38 19,40 Alu12,70 24 29 67 77 33,400 48,0 38 19,40 Alu12,70 29 34 75 85 33,400 48,0 38 19,40 Alu14,30 8 14 43 53 35,000 48,0 38 19,40 Blue14,30 14 19 51 61 35,000 48,0 38 19,40 Blue14,30 19 24 59 69 35,000 48,0 38 19,40 Blue14,30 24 29 67 77 35,000 48,0 38 19,40 Blue14,30 29 34 75 85 35,000 48,0 38 19,40 Blue

Cap colorE /

across f lat

F / across

flat

Hole diameter

Grip lenght 1/16" * J H

* 20 mm grid height and 10 mm foot height.

Grip * Lenght identification

352 056 28-39

Grip capacity


Series number


Not spring loadedDrill jig positioning




Presentation

Part number example VPAD 352 3,2 � 6,3 A(A) Atlas / (P) Pneumat(3,2-6,3) Dia. of temporary fastenerSeries No. of temporary fastener(E) Angle type(D) Straight typeDriver for temporary fastener


Not spring loadedDrill jig positioning









A B C Ø D Ø E Ø F G(mm) (mm) (mm) (mm) (mm) (mm) (mm)

VPAD 352 3,2-6,3 A 0,6 - 4 N.m 250 41 184 36 24,5 12,7 3VPAD 352 3,2-6,3 P 2,2 - 5 N.m 278 42,5 150 36 24,5 12,5 4,5

VPAD 352 7,9 A 0,6 - 4 N.m 250 41 184 46,5 37 16,5 3VPAD 352 7,9 P 1 - 8 N.m 256 41 165 46,5 37 16,5 3

VPAD 352 9,5-11,1 A 3,5 - 10 N.m 273 41 184 58,5 49 18,5 3VPAD 352 9,5-11,1 P 1 - 8 N.m 256 41 165 58,5 49 18,5 3

VPAD 352 12,7-15,9 A 3,5 - 10 N.m 273 41 184 61,5 52 24,5 3VPAD 352 12,7-15,9 P 1 - 8 N.m 256 41 165 61,5 52 24,5 3

Part No. Torque


VPAE 352 3,2-6,3 A 0,5 - 3 N.m 260 41 106 36 24,5 12,7 3VPAE 352 3,2-6,3 P 1 - 3,8 N.m 304 41 106 36 24,5 12,7 3

VPAE 352 7,9 A 0,5 - 3 N.m 267 41 109 46,5 37 16 3VPAE 352 7,9 P 2 - 5,5 N.m 310 41 106 46,5 37 16 3

VPAE 352 9,5-11,1 A 0,5 - 4,5 N.m 281 44 109 58,5 49 18,5 6VPAE 352 9,5-11,1 P 2 - 5,5 N.m 320 44 110 58,5 49 18,5 6

VPAE 352 12,7-15,9 A 0,5 - 4,5 N.m 285 43 109 61,5 52 24,5 5VPAE 352 12,7-15,9 P 2 - 5,5 N.m 322 43 110 61,5 52 24,5 5

Part No. Torque



Dimensions in mm

Presentation • Features: Reduced volume, designed for being embedded into drilling jig. intended for the clamping of the aircraft elements through drilling jigs for “Concentric Collet” machines.




Not spring loadedTrough drill jig application


Grip capacity


Series number

Min. Max. Min. Max.3,20 2 8 2 13 Red3,20 7 13 11 22 Red3,20 13 19 20 31 Red4,10 2 8 3 14 Alu4,10 8 14 12 23 Alu4,10 14 20 21 32 Alu4,80 2 8 2 13 Yellow4,80 7 13 11 22 Yellow5,60 0 5 0 9 Orange5,60 5 11 7 18 Orange5,60 10 16 16 27 Orange5,60 16 22 25 36 Orange6,30 0 6 0 10 Bronze6,30 5 11 8 19 Bronze6,30 11 17 17 28 Bronze6,30 17 23 26 37 Bronze6,30 17 23 35 46 Bronze

Hole diameter Grip lenght 1/16" GripLenght

identif ication Cap color




Presentation

Part number example


Not spring loadedTrough drill jig application










VPAD 352 3,2-6,3 A 0,6 - 4 N.m 250 41 184 36 24,5 12,7 3VPAD 352 3,2-6,3 P 2,2 - 5 N.m 278 42,5 150 36 24,5 12,5 4,5

VPAD 352 7,9 A 0,6 - 4 N.m 250 41 184 46,5 37 16,5 3VPAD 352 7,9 P 1 - 8 N.m 256 41 165 46,5 37 16,5 3

VPAD 352 9,5-11,1 A 3,5 - 10 N.m 273 41 184 58,5 49 18,5 3VPAD 352 9,5-11,1 P 1 - 8 N.m 256 41 165 58,5 49 18,5 3

VPAD 352 12,7-15,9 A 3,5 - 10 N.m 273 41 184 61,5 52 24,5 3VPAD 352 12,7-15,9 P 1 - 8 N.m 256 41 165 61,5 52 24,5 3

Part No. Torque


VPAE 352 3,2-6,3 A 0,5 - 3 N.m 260 41 106 36 24,5 12,7 3VPAE 352 3,2-6,3 P 1 - 3,8 N.m 304 41 106 36 24,5 12,7 3

VPAE 352 7,9 A 0,5 - 3 N.m 267 41 109 46,5 37 16 3VPAE 352 7,9 P 2 - 5,5 N.m 310 41 106 46,5 37 16 3

VPAE 352 9,5-11,1 A 0,5 - 4,5 N.m 281 44 109 58,5 49 18,5 6VPAE 352 9,5-11,1 P 2 - 5,5 N.m 320 44 110 58,5 49 18,5 6

VPAE 352 12,7-15,9 A 0,5 - 4,5 N.m 285 43 109 61,5 52 24,5 5VPAE 352 12,7-15,9 P 2 - 5,5 N.m 322 43 110 61,5 52 24,5 5

Part No. Torque

VPA D 352 3,2 � 6,3 A(A) Atlas / (P) Pneumat(3,2-6,3) Dia. of temporary fastenerSeries No. of temporary fastener(E) Angle type(D) Straight typeDriver for temporary fastener


!

Presentation

Part number example

• Features: temporary fastener without spring loaded called as”Clamping”, designed for being embedded into drilling jig. Intended for the clamping of the aircraft elements through drilling jigs.



Temporary fastener Low profile threaded type

Not spring loaded

356041 03 08

Grip max.

Grip min.


Series numberAdd "H" for hex nut

Dimensions in mm

Min Max Min Max

3.2 3.2 3.35 2 - 4 2 7 1.2 140 12.7 11.6 7 11.6 Red3.2 3.2 3.35 4 - 7 6 11 1.2 140 12.7 11.6 7 11.6 Red3.2 3.2 3.35 7 - 9 10 15 1.2 140 12.7 11.6 7 11.6 Red3.2 3.2 3.35 9 - 12 14 19 1.2 140 12.7 11.6 7 11.6 Red3.2 3.2 3.35 12 - 14 18 23 1.2 140 12.7 11.6 7 11.6 Red3.2 3.2 3.35 14 - 17 22 27 1.2 140 12.7 11.6 7 11.6 Red3.2 3.2 3.35 17 - 19 26 31 1.2 140 12.7 11.6 7 11.6 Red4.1 4 4.2 2 - 5 3 8 1.2 140 12.7 11.6 7 11.6 White4.1 4 4.2 5 - 7 7 12 1.2 140 12.7 11.6 7 11.6 White4.1 4 4.2 7 - 10 11 16 1.2 140 12.7 11.6 7 11.6 White4.1 4 4.2 10 - 12 15 20 1.2 140 12.7 11.6 7 11.6 White4.1 4 4.2 12 - 15 19 24 1.2 140 12.7 11.6 7 11.6 White4.1 4 4.2 15 - 17 23 28 1.2 140 12.7 11.6 7 11.6 White4.1 4 4.2 17 - 20 27 32 1.2 140 12.7 11.6 7 11.6 White4.8 4.7 5 2 - 4 2 7 1.2 140 12.7 11.6 7 11.6 Yellow4.8 4.7 5 4 - 7 6 11 1.2 140 12.7 11.6 7 11.6 Yellow4.8 4.7 5 7 - 9 10 15 1.2 140 12.7 11.6 7 11.6 Yellow4.8 4.7 5 9 - 12 14 19 1.2 140 12.7 11.6 7 11.6 Yellow4.8 4.7 5 12 - 14 18 23 1.2 140 12.7 11.6 7 11.6 Yellow

Temporary fastener diameter

Grip

leng

ht

1/16

"

Clamping

G mm

Nom

inal Tolerance Grip range Torque

Nm +/- 10%

ForceDaN

H mm F mm E mm Color




Presentation

Part number example VPAD 352 3,2 � 6,3 A(A) Atlas / (P) Pneumat(3,2-6,3) Dia. of temporary fastenerSeries No. of temporary fastener(E) Angle type(D) Straight typeDriver for temporary fastener

NOTE : Installation and removal with the adapter 356 3.2-4.8


Not spring loaded










VPAD 352 3,2-6,3 A 0,6 - 4 N.m 250 41 184 36 24,5 12,7 3VPAD 352 3,2-6,3 P 2,2 - 5 N.m 278 42,5 150 36 24,5 12,5 4,5

VPAD 352 7,9 A 0,6 - 4 N.m 250 41 184 46,5 37 16,5 3VPAD 352 7,9 P 1 - 8 N.m 256 41 165 46,5 37 16,5 3

VPAD 352 9,5-11,1 A 3,5 - 10 N.m 273 41 184 58,5 49 18,5 3VPAD 352 9,5-11,1 P 1 - 8 N.m 256 41 165 58,5 49 18,5 3

VPAD 352 12,7-15,9 A 3,5 - 10 N.m 273 41 184 61,5 52 24,5 3VPAD 352 12,7-15,9 P 1 - 8 N.m 256 41 165 61,5 52 24,5 3

Part No. Torque


VPAE 352 3,2-6,3 A 0,5 - 3 N.m 260 41 106 36 24,5 12,7 3VPAE 352 3,2-6,3 P 1 - 3,8 N.m 304 41 106 36 24,5 12,7 3

VPAE 352 7,9 A 0,5 - 3 N.m 267 41 109 46,5 37 16 3VPAE 352 7,9 P 2 - 5,5 N.m 310 41 106 46,5 37 16 3

VPAE 352 9,5-11,1 A 0,5 - 4,5 N.m 281 44 109 58,5 49 18,5 6VPAE 352 9,5-11,1 P 2 - 5,5 N.m 320 44 110 58,5 49 18,5 6

VPAE 352 12,7-15,9 A 0,5 - 4,5 N.m 285 43 109 61,5 52 24,5 5VPAE 352 12,7-15,9 P 2 - 5,5 N.m 322 43 110 61,5 52 24,5 5

Part No. Torque




Dimensions in mm

Presentation • Features: Miniature temporary fastener called as “marking”, designed for the clamping of aircraft elements as well as the positioning of drilling-riveting machine’s spindle.




Not spring loadedFor "mark out"

Part number example

36 32 08-14

Grip capacity


Series number

Min. Max. Threaded rod

3,2 8 14 59 29 16 8 11

Hole diameter Grip A B C

E / across f lat

F / across

flat



Foot type driver

Presentation

Part number example VPA 36 P 1 � 08Nut diameterVersion No.(E) 90° angle type(D) Straight type(P) Foot typeSeries No. of temporary fastenerDriver for temporary fastener


VPA 36 P1 08 0,5 - 3 N.m 281 22 61 33,5 16,5 24

TorquePart No.


VPA 36 P1 08 RAL 0,5 - 3 N.m 281 22 151 33,5 16,5 24

Part No. Torque


Not spring loadedFor "mark out"









Movable spacer

• Features: Temporary fastener designed for the clamping of aircraft elements, allowing the installation or removal of temporary fastener out of the bushing without removing drilling jig or conversely allowing the removal of drilling jig without removing temporary fasteners. When the grippers are opened, the spacer moves with the grippers for minimizing the outside volume of the temporary fastener.

• Standard grip capacity.


Part number example

Presentation

Nominal dia. H A B C dia. E G I J37 052 20 40 5,2 151,5 101 77,5 19 37 8 A/flat Ø 9,3 13 A/flat Ø 13,7 137 052 36 56 5,2 167,5 101 77,5 19 37 8 A/flat Ø 9,4 13 A/flat Ø 13,8 137 074 12 32 7,4 140,5 95,5 74,5 24 37,5 11 A/flat Ø 12,7 17 A/flat Ø 18 237 074 31 51 7,4 159,5 95,5 74,5 24 37,5 11 A/flat Ø 12,8 17 A/flat Ø 19 237 074 50 70 7,4 178,5 95,5 74,5 24 37,5 11 A/flat Ø 12,9 17 A/flat Ø 20 237 074 69 89 7,4 197,5 95,5 74,5 24 37,5 11 A/flat Ø 12,10 17 A/flat Ø 21 237 088 10 26 8,8 135,5 95,5 73,5 24 35,5 12 A/flat Ø 13,9 19 A/flat Ø 20 337 088 24 40 8,8 149,5 95,5 73,5 24 35,5 12 A/flat Ø 13,10 19 A/flat Ø 21 337 088 38 54 8,8 163,5 95,5 73,5 24 35,5 12 A/flat Ø 13,11 19 A/flat Ø 22 337 088 52 68 8,8 177,5 95,5 73,5 24 35,5 12 A/flat Ø 13,12 19 A/flat Ø 23 337 088 66 82 8,8 191,5 95,5 73,5 24 35,5 12 A/flat Ø 13,13 19 A/flat Ø 24 337 088 80 96 8,8 205,5 95,5 73,5 24 35,5 12 A/flat Ø 13,14 19 A/flat Ø 25 337 088 94 110 8,8 219,5 95,5 73,5 24 35,5 12 A/flat Ø 13,15 19 A/flat Ø 26 337 097 14 30 9,7 144 100 80 24 34 14 A/flat Ø 16,2 20 A/flat Ø 21 437 097 29 45 9,7 159 100 80 24 34 14 A/flat Ø 16,3 20 A/flat Ø 22 437 097 44 60 9,7 174 100 80 24 34 14 A/flat Ø 16,4 20 A/flat Ø 23 437 097 59 75 9,7 189 100 80 24 34 14 A/flat Ø 16,5 20 A/flat Ø 24 437 121 21 38 12,1 164,5 112 90 33 36 17 A/flat Ø 19,7 26 A/flat Ø 27 537 121 37 54 12,1 180,5 112 90 33 36 17 A/flat Ø 19,8 26 A/flat Ø 28 537 121 53 70 12,1 196,5 112 90 33 36 17 A/flat Ø 19,9 26 A/flat Ø 29 537 136 27 47 13,6 181,5 118 90 37 40 18 A/flat Ø 20,8 31 A/flat Ø 32 637 136 45 65 13,6 199,5 118 90 37 40 18 A/flat Ø 20,9 31 A/flat Ø 33 637 136 63 83 13,6 217,5 118 90 37 40 18 A/flat Ø 20,10 31 A/flat Ø 34 637 165 45 63 16,5 211,5 129,5 95,5 43 39 23 A/flat Ø 26,6 39 A/flat Ø 41 737 165 60 78 16,5 226,5 129,5 95,5 43 39 23 A/flat Ø 26,7 39 A/flat Ø 42 737 165 75 93 16,5 241,5 129,5 95,5 43 39 23 A/flat Ø 26,8 39 A/flat Ø 43 737 165 90 108 16,5 256,5 129,5 95,5 43 39 23 A/flat Ø 26,9 39 A/flat Ø 44 737 180 66 84 18 236,5 141,5 107,5 45 40 23 A/flat Ø 26,6 39 A/flat Ø 45 737 180 81 99 18 - 141,5 107,5 45 40 23 A/flat Ø 26,7 39 A/flat Ø 46 737 180 96 114 18 276,5 141,5 107,5 45 40 23 A/flat Ø 26,8 39 A/flat Ø 47 7

37 180 111 129 18 291,5 141,5 107,5 45 40 23 A/flat Ø 26,9 39 A/flat Ø 48 7

Part No.SIZE (mm) Driver code

advised

37 097 14 30 NGNew generationGrip max.Grip min.Diameter code in 1/10 mm Series number



Presentation

VPA 37 12 E 1 � 17Nut diameterVersion No.(E) 90° angle type(1) Torque range(2) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener


Movable spacer







Part number example


1 VPA 37 12 E1 08 1.5 - 8 N.m 384 54 110,5 28 14,8

2 VPA 37 12 E1 11 4 - 33 N.m 384 66 114,5 28 243 VPA 37 12 E1 12 4 - 33 N.m 384 58,5 115 28 244 VPA 37 12 E1 14 4 - 33 N.m 385,5 60 104,5 31 255 VPA 37 12 E1 17 10 - 37 N.m 389 68 131 38 316 VPA 37 12 E1 18 30 - 70 N.m 389 74,5 135,5 38 357 VPA 37 12 E1 23 30 - 70 N.m 392 78,5 140,5 44,5 45,5

TorqueDriver code Part No.


• Features: Temporary fastener with double threaded stem is intended for fast installation and high production applications. It is produced with a special anti-adhesive coating, avoiding the accumulation of rubber sealant product on the fastener.




Temporary fastenerDouble threaded type

Spring loadedHex driving nut

Presentation

Dimensions in mm

Part number example


41 - 32 - 00 - 25 - ETAccurate spacer

Grip max.

Grip min.


Series number

00-15 00-1500-25 00-2500-15 15-4000-25 25-5000-15 00-1500-25 00-2510-35 15-4000-15 25-5000-25 00-1510-35 00-2500-15 15-4000-25 25-5015-40 00-1500-15 00-2500-25 15-4015-40 25-5025-50 00-15

00-2515-4025-50

Clamping force max.

( daN )

2,4 2,4-2,5 Black 100

Nominal diameter Hole diameter Body color Grip

3,0 3-3,1 Pink 100

3,2 3,2-3,35 Red 200

3,6 3,5-3,7 Blue 200

4,1 4-4,2 White 250

4,8 4,7-5 Yellow 350

Clamping force max.

( daN )

5,0 5H7 Yellow 350


5,7-6 Green 350

5,6 5,4-5,7 Black 350

6,2-6,5 Brow n 350

6,0 6H7 Green 350

1-3

1-3

1-3

6,3

5,8

1-3

1-3

2-4

Driver code advised

2-4

2-4

2-4

2-4

2-4

Driver code advised



Presentation

Part number exampleVPA 75 27 D 1 � 10

Nut diameterVersion No.(E) Angle type(D) Straight type(2) Torque range(7) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener











1 VPA 75 27 D1 10 0,6 - 4 N.m 296 82 184 35 19,52 VPA 75 37 D1 10 3,5 - 10 N.m 319 82 184 35 19,5

Driver code TorquePart No.


3 VPA 41 17 E1 10 0,5 - 3 N.m 258 73,0 128 29 16,54 VPA 41 07 E1 10 2,5 - 7 N.m 357 73 130 29 16,5



• Features: temporary fastener designed from the series 41 with double threaded stem, cylindrical driving nut allowing a quick installation and removal. These high performance temporary fasteners with spring loaded are intended for rubber sealant application. Anti adhesive coating is applied on gripper for ease cleaning.




Presentation

Dimensions in mm

Part number example


42 - 32 - 00 - 25

Grip max.

Grip min.


Series number


Spring loadedCylindrical driving nut

00-15 00-1500-25 00-2500-15 15-4000-25 25-5000-15 00-1500-25 00-2510-35 15-4000-15 25-5000-25 00-1510-35 00-2500-15 15-4000-25 25-5015-40 00-1500-15 00-2500-25 15-4015-40 25-5025-50 00-15

00-2515-4025-50

Clamping force max.

( daN )

2,4 2,4-2,5 Black 100


3,0 3-3,1 Pink 100

3,2 3,2-3,35 Red 200

3,6 3,5-3,7 Blue 200

4,1 4-4,2 White 250

4,8 4,7-5 Yellow 350

Clamping force max.

( daN )

5,0 5H7 Yellow 350


5,7-6 Green 350

5,6 5,4-5,7 Black 350

6,2-6,5 Brow n 350

6,0 6H7 Green 350

1-3

1-3

1-3

6,3

5,8

1-3

1-3

2-4

Driver code advised

2-4

2-4

2-4

2-4

2-4

Driver code advised



Presentation



Spring loadedCylindrical driving nut









1 VPA 42 27 D1 10 0,6 - 4 N.m 297 83 184 35 242 VPA 42 37 D1 10 3,5 - 10 N.m 320 83 184 35 24



3 VPA 42 17 E1 10 0,5 - 3 N.m 260 70 133 35 244 VPA 42 07 E1 10 2,5 - 7 N.m 360 70 135 35 24



• Features: temporary fastener designed from the series 42 with double threaded stem, cylindrical driving nut allowing a quick installation and removal. The end fitting enable an optimized bearing area with the drilling jig. These high performance temporary fasteners with spring loaded are intended for rubber sealant application. Anti adhesive coating is applied on gripper for ease cleaning.



Presentation

Dimensions in mm

Part number example

Series 42S Temporary fasteners

A B C D

Min. Max.8,0 24,0 35,0 500 81 143 5 28

Hole diameter Grip

Clamping force max. ( daN )

42S 80 24-35

Grip capacity


Series number

Options 42S G Guiding42S ET Positioning

Temporary fastenerThreaded typespring loaded

With optimized bearing surface


Series 42S Installation tooling

Presentation

Part number example


Temporary fastenerThreaded typespring loaded

With optimized bearing surface








VPA 42 37 D1 10 3,5 - 10 N.m 320 83 184 35 24

Part No. Torque


VPA 42 07 E1 10 2,5 - 7 N.m 360 70 135 35 24

Part No. Torque



Presentation

Dimensions in mm

Part number example


• Features: Temporary fastener called as “marking”, designed for the clamping of aircraft elements as well as the positioning of drilling-riveting machine’s spindle.



Min. Max.Red 3,2 4 18 200

White 4,0 0 19 250

Body color Hole diameter GripClamping force

max. ( daN )

43 32 4-18

Grip capacity


Series number

Temporary fastenerThreaded type Spring loaded For “Mark out”



Presentation


VPA 43 27 D1 10 0,6 - 4 N.m 309 95 184 35 20

Part No. Torque

Part number example


Temporary fastenerThreaded type Spring loaded For “Mark out”








Temporary fastener Threaded type Spring loaded

Calibrated clamping loadPresentation

Dimensions in mm

Part number example


• Features: auto calibrated reduced preload specially designed for assembly with aluminum resin. The diameter of the cylindrical driving nut is reduced for avoiding to use the installation tool of the series 42. Standard grip capacity : 0 - 15 mm.




Black 2,4 / 2,5 100Pink 3,0 100Red 3,2 100 12 ( Red )Blue 3,5 / 3,6 100 25-30 ( Black )White 4,0 101 45 ( Grey )

Yellow 4,8 / 5 102 60 ( White )Pink 5,3 102 100 ( Yellow (1) )

Black 5,6 102 130 ( Green (1) )Green 5,8 / 6 102Brow n 6,3 103

(1) No limiter

12 - 20 - 25 - 30 - 45 - 60 100

30 - 45 - 60 - 100 - 130

Body color Hole diameter Clamping force (daN) Spring colorA

44 32

Pre-loadMax gripMin gripDiamter in 1/10 mmSeries numbe

XX XX 12




Presentation

Part number example


Calibrated clamping load








VPA 44 27 D1 9,5 N/A 304 79 184 32 19 21 17VPA 44 18 D1 9,5 N/A 328 80 177 32 21 19 17VPA 44 18 D3 9,5 N/A 328 80 177 32 21 19 17VPA 44 20 D3 9,5 N/A 317 79 145 32 21 19 17

Part No. Torque


VPA 44 17 E1 9.5 N/A 260 79 150 32 19 21 17

Part No. Torque

VPA 44 27 D 1 � 9,5Nut diameterD1: 12 up to 60 DaN / D3: 30 up to 130 DaN(E) Angle type(D) Straight type(2) Torque range(7) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener


Presentation

Dimensions in mm

Part number example

Series 44H Temporary fasteners

• Features: Temporary fastener with reduced preload specially designed for assembly with aluminum resin.




44H 32 12Clamping force


Series number



Min. Max.Black 2,4 / 2,5 100 0 15 20 BlackRed 3,2 / 3,35 100 0 15 20 BlackBlue 3,5 / 3,7 100 0 15 20 BlackWhite 4,0 / 4,2 101 0 15 20 BlackWhite 4,0 / 4,2 127 0 25 20 BlackWhite 4,0 / 4,2 120 10 35 20 BlackYellow 4,8 / 5 102 0 15 20 BlackYellow 4,8 / 5 129 0 25 20 BlackYellow 4,8 / 5 137 10 35 20 BlueBlack * 5,4 / 5,7 104 0 15 20 BlackGreen 5,7 / 6 104 0 15 20 BlackGreen 5,7 / 6 140 10 35 20 BlackGreen 5,7 / 6 138 10 40 20 BlackGreen 5,7 / 6 143 15 40 20 BlackGreen 5,7 / 6 151 25 50 20 BlackBrow n 6,2 / 6,5 103 0 15 20 BlackBrow n 6,2 / 6,5 103 0 15 60 White

Clamping force (daN)

Spring color

(1) No limiter - * Accurate spacer


44H 32

Pre-loadMax gripMin gripDiamter in 1/10 mmSeries numbe

XX XX 12


Series 44H Installation tooling

Presentation

Part number exampleVPA 44DH 20 DAN A

ProviderSpring loadSeries No. of temporary fastener / "D" straight / "H" hexDriver for temporary fastener













VPA 44DH 20 DAN A 0,4 - 5 N.m 290 88,5 170 35 / 19,5 /VPA 44DH 60 DAN A 0,4 - 5 N.m 290 88,5 170 35 / 19,5 /

Part No. Torque


VPA 44EH 20 DAN A 0,5 - 3 N.m 264 88,5 166 35 19,5 / /VPA 44EH 60 DAN A 0,5 - 3 N.m 264 88,5 166 35 19,5 / /

Part No. Torque




Presentation

Dimensions in mm

Part number example


• Features: temporary fastener designed from the series 42, intended for clamping and positioning of drilling jig.



Min. Max.3,0 15 30 15 5 25 6,4 134 1-33,0 15 30 15 5 25 8,0 134 1-33,2 3 17 2,5 5 16 10,0 136 1-33,2 15 30 15 5 25 10,0 136 1-33,5 15 30 15 5 25 6,4 132 1-34,0 9 21 3 5 24 14,5 137,5 1-34,0 15 30 15 5 25 6,4 137,5 1-34,0 30 55 14 5 17 10,0 137,5 1-35,0 15 30 15 5 25 8,2 155 2-4

Hole diameter Grip A B Ø C Ø G D Driver code advised

45G 30 64 21 16 29

Grip max.Grip min.Guiding area lenght A in mmGuiding diameter code G in 1/10 mmDiameter code in 1/10 mmSeries number



Presentation













1 VPA 42 27 D1 10 0,6 - 4 N.m 297 83 184 35 242 VPA 42 37 D1 10 3,5 - 10 N.m 320 83 184 35 24



3 VPA 42 17 E1 10 0,5 - 3 N.m 260 70 133 35 244 VPA 42 07 E1 10 2,5 - 7 N.m 360 70 135 35 24



Presentation

Dimensions in mm

Part number example

Series 45GH Temporary fasteners

• Features: temporary fastener designed from the series 41, intended for clamping and positioning of drilling jig.





Min. Max.4,0 15 30 15 5 25 6 170,5 1-34,0 30 55 14 5 17 10 170,5 1-34,7 15 30 14 5 17 10 135 2-46,2 24 41 14 5 17 10 170,5 2-4

Hoel diameter Grip A B Ø C Ø G D Driver code advised

45GH 40 10 14 30 55

Grip max.Grip min.Guiding area lenght A in mmGuiding diameter code G in 1/10 mmDiameter code in 1/10 mmSeries number


Series 45GH Installation tooling

Presentation












1 VPA 75 27 D1 10 0,6 - 4 N.m 296 82 184 35 19,52 VPA 75 37 D1 10 3,5 - 10 N.m 319 82 184 35 19,5



3 VPA 41 17 E1 10 0,5 - 3 N.m 258 73,0 128 29 16,54 VPA 41 07 E1 10 2,5 - 7 N.m 357 73 130 29 16,5



Presentation

Dimensions in mm

Part number example


• Features: Temporary fastener with the same features as the series 50 with in addition a spring loaded.



49 063 00 25

Grip max.

Grip min.


Series number


Spring loaded - High clamping forceCylindrical driving nut

Min. Max.6,30 0 25 600 128 15,8 10 14 Alu Brow n 26,30 5 25 600 125 15,8 10 14 Green Brow n 27,60 10 35 600 132 15,8 10 14 Green Alu 27,80 0 13 600 112 15,8 10 14 Green Alu 27,80 12 26 600 125 15,8 10 14 Green Alu 27,80 0 26 600 135 15,8 10 14 Green Alu 27,90 0 26 600 130 15,8 10 14 Alu Alu 27,90 10 35 600 132 15,8 10 14 Green Alu 2

7,90 25 40 600 151 15,8 10 14 Alu Alu 29,20 10 35 800 156 15,8 10 14 Green Alu 29,37 0 25 800 146 15,8 10 14 Alu Alu 29,37 12 26 800 137 15,8 10 14 Green Alu 29,37 26 39 800 151 15,8 10 14 Green Alu 29,50 10 35 800 156 15,8 10 14 Green Alu 210,80 10 35 1150 182 20,0 13 18 Alu Alu 3-410,97 12 26 1150 173 20,0 13 18 Alu Alu 3-410,97 26 39 1150 186 20,0 13 18 Alu Alu 3-411,10 10 35 1150 182 20,0 13 18 Alu Alu 3-412,40 20 40 1500 190 20,0 13 18 Alu Alu 3-412,55 12 26 1500 175 20,0 13 18 Alu Alu 3-412,55 26 39 1500 188 20,0 13 18 Alu Alu 3-412,70 20 40 1500 190 20,0 13 18 Alu Alu 3-4

Hole diameter Grip Clamping force max.

( daN )

ACap color Driver code

advisedØ D Ø E F /

across flat

Stop color


Presentation

Dimensions in mm

Part number example


• Features: Temporary fastener with the same features as the series 50 with in addition a spring loaded, designed for the clamping and the positioning of drilling jig.





49G 032 190 32 50 75Grip max.Grip min.Guiding area lenght A in mmGuiding diameter code G in 1/10 mmDiameter code in 1/10 mmSeries number

Min. Max. Min. Max.3,2 34 54 34 5 19,0 10 14 1 6,3 35,0 55,0 32,0 5,0 19,0 10 14 23,2 35 55 32 5 19,0 10 14 1 6,3 34,0 62,0 34,0 5,0 19,0 10 14 23,2 50 75 32 5 19,0 10 14 1 6,3 36,0 61,0 36,0 5,0 22,0 10 14 23,2 35 55 32 5 22,0 10 14 1 6,3 35,0 55,0 32,0 5,0 22,1 10 14 23,2 35 55 32 5 22,1 10 14 1 6,3 45,0 61,0 36,0 5,0 22,1 10 14 23,2 35 55 32 5 25,4 10 14 1 6,3 35,0 55,0 32,0 5,0 25,0 10 14 23,2 50 75 32 5 25,4 10 14 1 6,3 35,0 55,0 33,0 5,0 25,4 10 14 23,9 25 45 16 5 10,0 10 14 1 6,6 35,0 55,0 32,0 5,0 22,1 10 14 2

3,9 25 45 16 5 12,0 10 14 1 6,6 45,0 76,0 36,0 5,0 22,1 10 14 23,9 25 45 16 5 14,0 10 14 1 7,9 25,0 45,0 16,0 5,0 14,0 10 14 24,1 34 52 34 5 19,0 10 14 1 7,9 35,0 55,0 32,0 5,0 19,0 10 14 24,6 34 54 34 5 19,0 10 14 1 7,9 50,0 75,0 32,0 5,0 19,0 10 14 2

4,76 34 54 34 5 15,8 10 14 1 7,9 35,0 55,0 32,0 5,0 25,4 10 14 24,77 25 45 16 5 10,0 10 14 1 7,9 50,0 75,0 32,0 5,0 25,4 10 14 24,8 35 55 32 5 19,0 10 14 1 7,9 36,0 61,0 36,0 5,0 25,4 10 14 24,8 35 55 32 5 22,0 10 14 1 7,9 45,0 61,0 36,0 5,0 25,4 10 14 24,8 35 55 32 5 22,1 10 14 1 9,5 41,0 76,0 36,0 5,0 28,5 10 14 26,0 70 105 55 5 16,0 10 14 2 9,5 40,0 61,0 40,0 5,0 28,5 10 14 26,0 85 110 65 5 16,5 10 14 2 11,0 56,0 76,0 36,0 5,0 31,5 13 18 3-46,3 25 45 16 5 12,0 10 14 2 12,7 36,0 61,0 36,0 5,0 22,0 13 18 3-46,3 34 54 34 5 15,8 10 14 2

Hole diameterGrip A B Ø G

Hole diameterGrip A BØ E F /

across flat

Driver code

advised

Ø E F / across

f lat

Ø G Driver code

advised


Series 49 - 49G









Presentation


Part number example

A B C Ø D E Ø F G(mm) (mm) (mm) (mm) (mm) (mm) (mm)

1 VPA 49 27 D1 10 0,6 - 4 N.m 292 87 185 33 / 25 /2 VPA 49 37 D1 10 3,5 - 10 N.m 327 87 185 33 / 25 /3 VPA 49 47 D1 13 3,5 - 12,5 N.m 340 94 185 41 29 34 23,54 VPA 49 37 D2 13 3,5 - 10 N.m 374 132 185 42 28,6 34 25

TorquePart No.Driver code

VPA 49H 37 D 1 � 10Nut diameterVersion No.(E) Angle type(D) Straight type(3) Torque range(7) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener


Presentation

Dimensions in mm

Part number example

Series 49H Temporary fasteners

• Features: Temporary fastener with the same features as the series 50 with in addition a spring loaded.




Spring loaded - High clamping forceHex driving nut

Min. Max. Min. Max.6,20 10 35 350 141 15,8 10 14 Alu Alu 1-5-6 9,50 5 30 800 152 15,8 10 14 Alu Alu 1-5-6

6,60 0 25 350 131 15,8 10 14 Brow n Alu 1-5-6 9,50 10 35 800 156 15,8 10 14 Green Alu 1-5-66,60 10 35 350 141 15,8 10 14 Brow n Alu 1-5-6 10,50 10 35 800 185 20,0 13 18 Alu Alu 2-3-4-77,20 15 30 350 131 15,8 10 14 Green Alu 1-5-6 11,00 15 40 1150 191 20,0 13 18 Alu Alu 2-3-4-7

7,3 / 7,5 10 35 600 145 15,8 10 14 Green Alu 1-5-6 11,10 10 35 1150 182 20,0 13 18 Alu Alu 2-3-4-77,6 / 8,2 45 62 600 184 15,8 10 14 Alu Alu 1-5-6 11,10 30 55 1150 206 20,0 13 18 Alu Alu 2-3-4-77,6 / 8,2 62 79 600 201 15,8 10 14 Alu Alu 1-5-6 12,60 10 35 1500 186 20,0 13 18 Alu Alu 2-3-4-7

7,80 0 25 600 135 15,8 10 14 Alu Alu 1-5-6 12,60 30 55 1500 206 20,0 13 18 Alu Alu 2-3-4-77,80 5 30 600 151 15,8 10 14 Alu Alu 1-5-6 12,70 10 35 1500 189 20,0 13 18 Alu Alu 2-3-4-77,80 10 35 600 145 15,8 10 14 Alu Alu 1-5-6 13,00 30 55 1500 228 27,0 13 22 Alu Alu 2-3-4-77,80 20 35 600 131 15,8 10 14 Green Blue 1-5-6 13,60 62 85 1500 261 27,0 13 22 Alu Alu 2-3-4-77,90 0 26 600 131 15,8 10 14 Green Alu 1-5-6 13,60 85 108 1500 284 27,0 13 22 Alu Alu 2-3-4-77,90 5 30 600 151 15,8 10 14 Alu Alu 1-5-6 13,90 15 40 1500 216 27,0 13 22 Alu Alu 2-3-4-77,90 10 35 600 132 15,8 10 14 Green Alu 1-5-6 14,50 50 75 2000 262 27,0 13 22 Alu Alu 2-3-4-78,20 15 40 600 161 15,8 10 14 Alu Alu 1-5-6 15,70 10 35 2500 228 27,0 13 22 Alu Alu 2-3-4-78,80 0 25 600 146 15,8 10 14 Alu Alu 1-5-6 15,70 30 55 2500 248 27,0 13 22 Alu Alu 2-3-4-78,80 15 40 600 161 15,8 10 14 Alu Alu 1-5-6 16,50 90 110 3000 298 29,0 13 28 Alu Alu 2-3-4-79,40 0 25 800 146 15,8 10 14 Alu Alu 1-5-6 16,50 116 138 3000 326 29,0 13 28 Alu Alu 2-3-4-79,40 15 40 800 161 15,8 10 14 Alu Alu 1-5-6 18,00 118 138 3500 330 29,0 13 28 Alu Alu 2-3-4-79,50 0 26 800 147 15,8 10 14 Alu Alu 1-5-6 18,90 25 45 4000 236 29,0 13 28 Alu Alu 2-3-4-7

Hole diameter

Grip Clamping force max.

( daN )

A Ø D E / across

flat

F / across

f lat

Stop color

Cap color

Hole diameter

Grip Clamping force max.

( daN )

Stop color

Cap color

Driver code

advised

Driver code

advised

A Ø D E / across

flat

F / across

f lat

49H 072 15 30Grip max.Grip min.Diameter code in 1/10 mmSeries number


Presentation

Part number example

Series 49GH Temporary fasteners

Dimensions in mm

49GH 060160 55 70 105

Grip max.

Grip min.

Guiding area lenght A in mm



Series number

• Features: Temporary fastener with the same features as the series 50 with in addition a spring loaded, designed for the clamping and the positioning of drilling jig.





Min. Max.6,0 70 105 55 5 26 16,0 10 14 1-5-6

6,0 85 110 65 5 26 16,5 10 14 1-5-66,3 36 61 36 5 32 22,0 10 14 1-5-66,3 85 110 65 5 26 16,5 10 14 1-5-67,7 85 110 65 5 26 16,0 10 14 1-5-67,9 85 110 65 5 26 16,0 10 14 1-5-67,9 70 105 55 5 26 18,0 10 12 1-5-67,9 35 60 20 5 26 20,0 10 14 1-5-6

10,0 35 60 20 5 27 21,0 10 14 1-5-612,4 35 60 35 5 29 19,0 10 14 1-5-6

Hole diameterGrip A B Ø C Ø G E /

across f lat

F / across

flat

Driver code advised


Presentation

Part number example

Series 49H - 49GH Installation tooling


Spring loaded - High clamping forceHex driving nut








VPA 49H 37 D 1 � 10Nut diameterVersion No.(E) Angle type(D) Straight type(3) Torque range(7) Motor manufacturerSeries No. of temporary fasDriver for temporary fastene

A B C Ø D E Ø F G(mm) (mm) (mm) (mm) (mm) (mm) (mm)

1 VPA 49H 37 D1 10 3,5 - 10 N.m 327 82 185 35 23,8 25 202 VPA 49H 37 D1 13 3,5 - 10 N.m 360 119 185 38 / 30,2 /3 VPA 49H 37 D2 13 3,5 - 10 N.m 379 132 185 42 28,6 34 254 VPA 49H 37 D3 13 3,5 - 10 N.m 379 132 185 50,2 / 40 /



5 VPA 49H 07 E2 10 7 - 15 N.m 356 92,5 139 33 246 VPA 49SH 07 E2 10 10 - 20 N.m 362 92,5 139 33 247 VPA 49H 07 E1 13 2,5 - 7 N.m 360 119 181 38 30,2



Presentation

Dimensions in mm

Part number example


• Features: Temporary fastener for specific application. Installation through drilling jig, allowing the installation or removal of temporary fastener out of the bushing without removing drilling jig or conversely allowing the removal of drilling jig without removing temporary fasteners. High grip range and high clamping force.



50 44 8-22Grip capacity


Series number


Not spring loaded - High clamping forceHex driving nut

Min. Max. E F4,40 8,0 22,0 300 90 35 33 15 Ø10 12 A/flat 15,70 8,0 28,0 500 92 43 40 15 10 A/flat 12 A/flat 2-3-4-6-77,80 5,0 25,0 700 140 53 60 18 10 A/flat 16 A/flat 2-3-4-6-77,90 5,0 25,0 700 140 53 60 18 10 A/flat 16 A/flat 2-3-4-6-77,90 8,0 26,0 700 140 53 60 18 10 A/flat 16 A/flat 2-3-4-6-77,90 17,0 22,0 700 140 53 60 18 10 A/flat 16 A/flat 2-3-4-6-78,00 17,0 26,0 700 140 53 60 18 10 A/flat 16 A/flat 2-3-4-6-78,20 20,0 42,0 700 157 73 60 18 10 A/flat 16 A/flat 2-3-4-6-79,00 27,0 53,0 800 171 85 65 18 10 A/flat 16 A/flat 2-3-4-6-79,35 5,0 25,0 850 139 58 60 18 10 A/flat 16 A/flat 2-3-4-6-710,00 27,0 53,0 850 171 85 65 18 10 A/flat 16 A/flat 2-3-4-6-710,20 27,0 53,0 850 171 85 65 18 10 A/flat 16 A/flat 2-3-4-6-710,95 5,0 25,0 950 138 58 60 18 10 A/flat 16 A/flat 2-3-4-6-79,50 32,0 50,0 850 330 83 221 22 13 A/flat 19 A/flat 510,73 32,0 50,0 850 336 90 221 22 13 A/flat 19 A/flat 511,20 27,0 53,0 950 181 86 67 22 13 A/flat 19 A/flat 511,20 32,0 50,0 950 336 90 221 22 13 A/flat 19 A/flat 512,08 32,0 50,0 950 336 90 221 22 13 A/flat 19 A/flat 512,79 27,0 53,0 950 181 86 67 22 13 A/flat 19 A/flat 512,79 32,0 50,0 950 336 90 221 22 13 A/flat 19 A/flat 5

Hole diameter GripClamping

force max. ( daN )

A B C Ø D Dimensions Driver code advised



Presentation



Not spring loaded - High clamping forceHex driving nut









1 VPA 50 27 D4 10 0,6 - 4 N.m 295 81 184 35 22,52 VPA 50 37 D3 10 3,5 - 10 N.m 275 67 184 29 16,53 VPA 50 47 D2 10 3,5 - 12,5 N.m 317 88 184 35 24,54 VPA 50 47 D5 10 3,5 - 12,5 N.m 302 88,0 184 35 23,55 VPA 50 47 D1 13 3,5 - 12,5 N.m 306 93,0 184 35 27



6 VPA 50 07 E1 10 2,5 - 7 N.m 358 50 109 30 16,57 VPA 50 07 E2 10 2,5 - 7 N.m 357 62 118 29 16,5





Presentation

Dimensions in mm

Part number example


• Features: With or without Teflon sleeve on the grippers. For rubber sealant and resin applications. Grip range: 0 - 15 mm.



51 -040- 00 - 15

Grip max

Grip min


Series number

Alu 4,0 103,0 250 1-3Yellow 4,8 104,5 350 2-4Bronze 6,3 104,0 350 2-4

Driver code advised

Stop color Hole diameter AClamping

force max. ( daN )



Presentation












1 VPA 75 27 D1 10 0,6 - 4 N.m 296 82 184 35 19,52 VPA 75 37 D1 10 3,5 - 10 N.m 319 82 184 35 19,5



3 VPA 41 17 E1 10 0,5 - 3 N.m 258 73,0 128 29 16,54 VPA 41 07 E1 10 2,5 - 7 N.m 357 73 130 29 16,5



Presentation

Dimensions in mm

Part number example


• Features: Installation through drilling jig, allowing the installation or removal of temporary fastener out of the bushing without removing drilling jig or conversely allowing the removal of drilling jig without removing temporary fasteners. High grip range and high clamping force. Equipped with a spring loaded for rubber sealant application. Grippers are covered with an anti adhesive coating for easing the cleaning. For hole diameter below 6.35 mm, the hex driving nut is replaced by a cylindrical driving nut of 10mm of diameter for the use of quick installation/removal drivers.



52 048 15-30

Grip capacity


Series number


Spring loaded - High clamping force

Min. Max.4,00 0 15 200 144 12 12 Black White 1-3-54,40 0 17 300 144 12 12 Black Yellow 1-3-54,60 0 17 300 144 12 12 White Yellow 1-3-54,80 15 30 300 161 12 12 White Yellow 2-4-66,00 0 26 500 161 13 12 Black Bronze 2-4-66,30 0 15 500 161 13 12 White White 2-4-66,30 0 26 500 161 13 12 White Bronze 2-4-67,20 18 27 700 177 14 16 Black Green 2-4-67,50 15 35 700 177 14 16 White White 2-4-67,90 15 35 700 177 14 16 White Green 2-4-67,90 25 45 700 187 14 16 White Green 2-4-69,10 20 40 800 185 16 16 Black Red 2-4-69,50 20 40 800 185 16 16 White Red 2-4-610,70 25 45 800 195 18 16 White Blue 711,10 25 45 800 195 16 16 Copper Blue 711,10 0 17 800 144 18 16 Blue White 712,50 50 75 249 22 22 White White 7

Hole diameter Grip A Driver code advised

Clamping force max.

( daN )

Ø DF

A/f lat Stop and body color

Cap color



cylindrical nut

Presentation













1 VPA 42 27 D1 10 0,6 - 4 N.m 297 83 184 35 242 VPA 42 37 D1 10 3,5 - 10 N.m 320 83 184 35 24



3 VPA 42 17 E1 10 0,5 - 3 N.m 260 70 133 35 244 VPA 42 07 E1 10 2,5 - 7 N.m 360 70 135 35 24




Hex nut

Presentation

Part number example











5 VPA 52 27 D1 10 0,6 - 4 N.m 332 115 184 35 22,6 23,3 256 VPA 52 37 D1 10 3,5 - 10 N.m 332 115 184 35 22,6 23,3 257 VPA 53 47 D1 13 3,5 - 12,5 N.m 349 132 184 42 28,6 34 25



Temporary fastenerThreaded type Spring loaded

For finished c-sink holes

Presentation

Dimensions in mm

Part number example


• Features: Installation through drilling jig, allowing the installation or removal of temporary fastener out of the bushing without removing drilling jig or conversely allowing the removal of drilling jig without removing temporary fasteners. High grip range and high clamping force. Equipped with a spring loaded for rubber sealant application. Grippers are covered by an anti adhesive coating for easing the cleaning. Specially design for avoiding the finished countersunk hole damage.



53 048 08-14

Grip capacity


Series number

Min. Max.4,80 8 14 300 178 14,5 10 12 1-26,30 12 18 600 181 14,5 10 12 1-27,90 12 25 700 198 16,0 10 16 1-29,50 12 30 800 188 20,0 10 16 1-211,10 12 35 800 198 20,0 10 16 1-212,70 25 45 1150 246 27,0 13 22 314,30 25 45 1250 248 27,0 13 22 315,90 25 45 1300 258 27,0 13 22 3

Hole diameter

Grip AClamping force max. (

daN )

Ø D E / across flat Nut

F / across

flat body

Driver code advised



Presentation

Part number example



For finished c-sink holes








1 VPA 52 37 D1 10 3,5 - 10 N.m 332 115 184 35 22,6 23,3 252 VPA 75 37 D1 10 3,5 - 10 N.m 319 82 184 35 / 19,5 /3 VPA 53 47 D1 13 3,5 - 12,5 N.m 349 132 184 42 28,6 34 25



• Reduced volume - designed for not exceeding the drilling jig thickness. For rubber sealant application requiring high clamping force.



Temporary fastener Compact threaded type

Spring loadedVery high clamping force

Presentation

Dimensions in mm


Part number example54 57 07 26 - DF

Double thread up to diameter 8.9mmGrip max.Grip min.Diameter code in 1/10 mmSeries number

Min. Max. Min. Max.5,7 7 26 97 44 33 10 A/f lat Ø 11,5 16 A/f lat Ø 17 1-7-8 9,7 60 90 191 118 33 14 A/flat Ø 19 20 A/f lat Ø 21 6-125,7 23 42 113 60 33 10 A/f lat Ø 11,6 16 A/f lat Ø 17 1-7-8 12,1 14 49 165 79 34 17 A/flat Ø 19,7 26 A/f lat Ø 27 136,4 7 26 98 45 33 12 A/f lat Ø 13,5 19 A/f lat Ø 20 3-4-10 12,1 19 61 164 84 34 17 A/flat Ø 20 26 A/f lat Ø 27 136,4 23 42 111 61 33 12 A/f lat Ø 13,6 19 A/f lat Ø 20 3-4-10 12,1 39 74 190 104 34 17 A/flat Ø 19,7 26 A/f lat Ø 27 137,4 7 26 98 45 33 13 A/f lat Ø 15 19 A/f lat Ø 20 5-11 12,1 64 99 215 129 34 17 A/flat Ø 19,7 26 A/f lat Ø 27 137,4 7 34 117 54 33 11 A/f lat Ø 12,7 17 A/f lat Ø 18 2-9 13,6 0 36 151 65 34 18 A/flat Ø 20,8 31 A/f lat Ø 32 147,4 23 42 114 61 33 13 A/f lat Ø 15 19 A/f lat Ø 20 5-11 13,6 29 65 179 93 34 18 A/flat Ø 20,8 31 A/f lat Ø 32 147,4 23 50 135 70 33 11 A/f lat Ø 12,7 17 A/f lat Ø 18 2-9 13,6 63 99 214 127 34 18 A/flat Ø 20,8 31 A/f lat Ø 32 147,4 47 74 158 93 33 11 A/f lat Ø 12,8 17 A/f lat Ø 18 2-9 16,5 50 66 208 114 44,5 23 A/flat Ø 26,6 39 A/f lat Ø 41 157,4 71 98 182 117 33 11 A/f lat Ø 12,9 17 A/f lat Ø 18 2-9 16,5 50 82 247 130 63,5 23 A/flat Ø 26,7 39 A/f lat Ø 41 157,4 95 122 206 141 33 11 A/f lat Ø 12,1 17 A/f lat Ø 18 2-9 16,5 66 82 225 130 44,5 23 A/flat Ø 26,8 39 A/f lat Ø 41 158,8 0 30 134 58 33 12 A/f lat Ø 14 19 A/f lat Ø 20 3-4-10 16,5 78 110 275 158 63,5 23 A/flat Ø 26,9 39 A/f lat Ø 41 158,8 8 50 143 67 33 12 A/f lat Ø 15 19 A/f lat Ø 20 3-4-10 16,5 82 98 241 146 44,5 23 A/f lat Ø 26,10 39 A/f lat Ø 41 158,8 45 80 176 100 33 12 A/f lat Ø 16 19 A/f lat Ø 20 3-4-10 16,5 106 138 303 186 63,5 23 A/f lat Ø 26,11 39 A/f lat Ø 41 158,9 7 26 99 46 33 13 A/f lat Ø 15 19 A/f lat Ø 20 5-11 16,5 128 160 325 208 63,5 23 A/f lat Ø 26,12 39 A/f lat Ø 41 158,9 23 42 115 62 33 13 A/f lat Ø 16 19 A/f lat Ø 20 5-11 18 50 82 283 145 80 23 A/f lat Ø 26,13 39 A/f lat Ø 41 158,9 39 58 131 78 33 13 A/f lat Ø 17 19 A/f lat Ø 20 5-11 18 78 110 311 173 80 23 A/f lat Ø 26,14 39 A/f lat Ø 41 159,7 11 36 138 65 33 14 A/f lat Ø 16 20 A/f lat Ø 21 6-12 18 106 138 339 201 80 23 A/f lat Ø 26,15 39 A/f lat Ø 41 159,7 26 51 155 82 33 14 A/f lat Ø 17 20 A/f lat Ø 21 6-12 18 134 166 367 229 80 23 A/f lat Ø 26,16 39 A/f lat Ø 41 159,7 41 70 170 97 33 14 A/f lat Ø 18 20 A/f lat Ø 21 6-12

Hole diameter

GripA B C Ø E Ø F Hole

diameterØ E Ø F

Driver code

advised

Driver code

advised

GripA B C



Presentation

Part number example










VPA 54 17 E 1 � 17Nut diameterVersion No.(E) Angle type(1) Torque range(7) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener


8 VPA 54 17 E1 10 7 - 15 N.m 354 56,5 99 28 219 VPA 54 17 E1 11 7 - 15 N.m 354 68 110 28 2410 VPA 54 17 E1 12 10 - 19 N.m 354 84 125 28 2411 VPA 54 17 E1 13 10 - 19 N.m 354 58 99 28 23,512 VPA 54 17 E1 14 10 - 19 N.m 356 74 127 31 2513 VPA 54 17 E1 17 10 - 19 N.m 380 91 135 38 3114 VPA 54 12 E1 18 10 à 37 N.m 451 90 140 38 3515 VPA 54 12 E1 23 30 à 70 N.m 456 90 150 46 46



1 VPA 54 18 D1 10 4 - 10 N.m 301 67 177 34 212 VPA 54 47 D1 11 3,5 - 12,5 N.m 295 80 185 34 21,13 VPA 54 18 D2 12 4 - 10 N.m 301 67 177 34 244 VPA 54 47 D2 12 3,5 - 12,5 N.m 308 83 185 34 245 VPA 54 20 D1 13 3,5 - 14 N.m 306 67 160 34 246 VPA 54 20 D1 14 3,5 - 14 N.m 322 68 160 34 257 VPA 54 18 D2 10 4 - 10 N.m 301 67 177 34 19,5



Presentation

Dimensions in mm

Series 55R Temporary fasteners


Spring loadedTeflon sleeve over grippers

• Temporary fastener with the same features as the series 54 with or without Teflon sleeve on the grippers :• 55 R : resin application• 55 M : rubber sealant application• 55 ET: accurate spacer for elements positioning.



mini maxi

55R 038 14 30 3,8 14 30 105,2 17 14 (Ø16) 8 155R 038 25 41 3,8 25 41 116,2 17 14 (Ø16) 8 155R 047 28 47 4,7 28 47 127,5 17 14 (Ø16) 8 155R 052 22 41 5,2 22 41 122 17 14 (Ø16) 8 155R 052 28 47 5,2 28 47 128 17 14 (Ø16) 8 155R 052 36 55 5,2 36 55 136 17 14 (Ø16) 8 155R 052 39 58 5,2 39 58 139 17 14 (Ø16) 8 155R 059 14 33 5,9 14 33 115,5 21 18 (Ø21,5) 10 255R 059 19 38 5,9 19 38 120,5 21 18 (Ø21,5) 10 255R 059 22 41 5,9 22 41 123,5 21 18 (Ø21,5) 10 255R 059 28 47 5,9 28 47 129,5 21 18 (Ø21,5) 10 255R 059 36 55 5,9 36 55 137,5 21 18 (Ø21,5) 10 255R 059 39 58 5,9 39 58 140,5 21 18 (Ø21,5) 10 255R 059 53 72 5,9 53 72 154,5 21 18 (Ø21,5) 10 255R 067 14 33 6,7 14 33 116 21 18 (Ø21,5) 10 255R 067 26 45 6,7 26 45 128 21 18 (Ø21,5) 10 255R 078 14 31 7,8 14 31 114,5 23 21 (Ø24) 12 355R 078 17 34 7,8 17 34 117,5 23 21 (Ø24) 12 355R 078 20 37 7,8 20 37 120,5 23 21 (Ø24) 12 355R 078 22 39 7,8 22 39 122,5 23 21 (Ø24) 12 355R 078 25 42 7,8 25 42 125,5 23 21 (Ø24) 12 355R 078 30 47 7,8 30 47 130,5 23 21 (Ø24) 12 355R 078 36 53 7,8 36 53 136,5 23 21 (Ø24) 12 355R 078 39 56 7,8 39 56 139,5 23 21 (Ø24) 12 355R 078 44 61 7,8 44 61 144,5 23 21 (Ø24) 12 355R 078 53 70 7,8 53 70 153,5 23 21 (Ø24) 12 355R 087 19 32 8,7 19 32 120,5 23 21 (Ø24) 12 355R 087 30 43 8,7 30 43 131,5 23 21 (Ø24) 12 355R 087 40 53 8,7 40 53 141,5 23 21 (Ø24) 12 355R 087 50 63 8,7 50 63 151,5 23 21 (Ø24) 12 355R 089 14 33 8,9 14 33 125,5 23 21 (Ø24) 12 355R 156 36 56 15,6 36 56 212 44 40 (Ø45) 23 755R 156 54 74 15,6 54 74 230 44 40 (Ø45) 23 7

Driver code advised

C across f lat

B across f latPart No.


GripA Ø D


Dimensions in mm

Series 55M Temporary fasteners



mini maxi

55M 038 14 30 3,8 14 30 105,2 17 14 (Ø16) 8 155M 038 25 41 3,8 25 41 116,2 17 14 (Ø16) 8 155M 047 28 47 4,7 28 47 127,5 17 14 (Ø16) 8 155M 052 22 41 5,2 22 41 122 17 14 (Ø16) 8 155M 052 28 47 5,2 28 47 128 17 14 (Ø16) 8 155M 052 39 58 5,2 39 58 139 17 14 (Ø16) 8 155M 059 14 33 5,9 14 33 115,5 21 18 (Ø21,5) 10 255M 059 22 41 5,9 22 41 123,5 21 18 (Ø21,5) 10 255M 059 28 47 5,9 28 47 129,5 21 18 (Ø21,5) 10 255M 059 36 55 5,9 36 55 137,5 21 18 (Ø21,5) 10 255M 059 39 58 5,9 39 58 140,5 21 18 (Ø21,5) 10 255M 059 53 72 5,9 53 72 154,5 21 18 (Ø21,5) 10 255M 067 14 33 6,7 14 33 116 21 18 (Ø21,5) 10 255M 067 26 45 6,7 26 45 128 21 18 (Ø21,5) 10 255M 070 24 43 7 24 43 126 21 18 (Ø21,5) 10 255M 070 36 55 7 36 55 138 21 18 (Ø21,5) 10 255M 078 14 31 7,8 14 31 114,5 23 21 (Ø24) 12 355M 078 17 34 7,8 17 34 117,5 23 21 (Ø24) 12 355M 078 20 37 7,8 20 37 120,5 23 21 (Ø24) 12 355M 078 22 39 7,8 22 39 122,5 23 21 (Ø24) 12 355M 078 25 42 7,8 25 42 125,5 23 21 (Ø24) 12 355M 078 30 47 7,8 30 47 130,5 23 21 (Ø24) 12 355M 078 39 56 7,8 39 56 139,5 23 21 (Ø24) 12 355M 078 44 61 7,8 44 61 144,5 23 21 (Ø24) 12 355M 078 53 70 7,8 53 70 153,5 23 21 (Ø24) 12 355M 087 19 32 8,7 19 32 120,5 23 21 (Ø24) 12 355M 087 22 35 8,7 22 35 123,5 23 21 (Ø24) 12 355M 087 28 41 8,7 28 41 129,5 23 21 (Ø24) 12 355M 087 30 43 8,7 30 43 131,5 23 21 (Ø24) 12 355M 087 38 51 8,7 38 51 139,5 23 21 (Ø24) 12 355M 087 40 53 8,7 40 53 141,5 23 21 (Ø24) 12 355M 087 50 63 8,7 50 63 151,5 23 21 (Ø24) 12 355M 089 14 33 8,9 14 33 125,5 23 21 (Ø24) 12 355M 089 25 44 8,9 25 44 136,5 23 21 (Ø24) 12 355M 089 36 55 8,9 36 55 147,5 23 21 (Ø24) 12 355M 100 14 33 10 14 33 142 24 21 (Ø24) 14 455M 100 25 44 10 25 44 153 24 21 (Ø24) 14 455M 121 20 39 12,1 20 39 154,5 30 27 (Ø31) 17 555M 121 30 49 12,1 30 49 164,5 30 27 (Ø31) 17 555M 137 25 44 13,7 25 44 179 35 32 (Ø36) 18 655M 156 36 56 15,6 36 56 212 44 40 (Ø45) 23 755M 156 54 74 15,6 54 74 230 44 40 (Ø45) 23 7

Driver code advised

Part No.Temporary fastener diameter

GripA C across

f latB across

f latØ D


Dimensions in mm

Series 55ET Temporary fasteners

Part number example

55M 038 14 30

Grip max.

Grip min.


Series number "M for sealant" "R for resin" "ET for accurate spacer"


Spring loaded – Centering applicationVery high clamping force

mini maxi

55 079 24 42-ET 7,9 24 42 125,5 23 21 (Ø24) 12 355 079 36 53-ET 7,9 36 53 136,5 23 21 (Ø24) 12 355 095 14 33-ET 9,5 14 33 142 24 21 (Ø24) 14 455 095 25 44-ET 9,5 25 44 153 24 21 (Ø24) 14 455 111 14 33-ET 11,1 14 33 148,5 30 27 (Ø31) 17 555 111 25 44-ET 11,1 25 44 159,5 30 27 (Ø31) 17 555 143 25 44-ET 14,3 25 44 200 44 40 (Ø45) 23 7

Driver code advised


GripA Ø D C across

f latB across

f latPart No.


Presentation


Part number example









VPA 55 27 D 1 � 08Value B across flat of driving nutVersion No.(D) Straight type(2) Torque range(7) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener


1 VPA 55 27 D1 08 0,6 - 4 N.m 255 42 184 36 242 VPA 55 27 D1 10 0,6 - 4 N.m 257 43 184 39 273 VPA 55 27 D1 12 0,6 - 4 N.m 283 69,5 184 43 314 VPA 55 27 D1 14 0,6 - 4 N.m 269 55 184 43 315 VPA 55 27 D1 17 0,6 - 4 N.m 273 59 184 43 386 VPA 55 27 D1 18 0,6 - 4 N.m 283 69,5 184 55 447 VPA 55 27 D1 23 0,6 - 4 N.m 300 86 184 64 53




Hybrid temporary fastenerSpring loaded

Dimensions in mm

Part number example58 5/32 00 15

Grip max.

Grip min.

Diameter code in 1/32 in

Series number

Presentation • Features : cylindrical body designed for installation and removal with standard driver. Removable cap allow to replace or repair the gripper assembly or spacer. Grippers are covered by an anti adhesive coating for easing the cleaning.



Min. Max.58-3/32-0-0,5 3/32" 0 0,558-3/32-0-1 3/32" 0 158-1/8-0-0,5 1/8" 0 0,558-1/8-0-1 1/8" 0 1

58-5/32-0-0,5 5/32" 0 0,558-5/32-0-1 5/32" 0 1

58-5/32-0,5-1,5 5/32" 0,5 1,558-3/16-0-0,5 3/16" 0 0,558-3/16-0-1 3/16" 0 1

58-3/16-0,5-1,5 3/16" 0,5 1,558-7/32-0-0,5 7/32" 0 0,558-7/32-0-1 7/32" 0 1

58-7/32-0,5-1,5 7/32" 0,5 1,558-1/4-0-0,5 1/4" 0 0,558-1/4-0-1 1/4" 0 1

58-1/4-0,5-1,5 1/4" 0,5 1,5

Part No. Hole diameter Ø DGrip

A B Ø C



Cylindrical body temporary fastenerNot spring loaded

Dimensions in mm

Part number example59 5/32 00 15

Grip max.

Grip min.

Diameter code in 1/32 in

Series number

Presentation • Features : cylindrical body designed for installation and removal with standard driver. Removable cap allow to replace or repair the gripper assembly or spacer. Grippers are covered by an anti adhesive coating for easing the cleaning.



Min. Max.58-3/32-0-0,5 3/32" 0 0,558-3/32-0-1 3/32" 0 158-1/8-0-0,5 1/8" 0 0,558-1/8-0-1 1/8" 0 1

58-5/32-0-0,5 5/32" 0 0,558-5/32-0-1 5/32" 0 1

58-5/32-0,5-1,5 5/32" 0,5 1,558-3/16-0-0,5 3/16" 0 0,558-3/16-0-1 3/16" 0 1

58-3/16-0,5-1,5 3/16" 0,5 1,558-7/32-0-0,5 7/32" 0 0,558-7/32-0-1 7/32" 0 1

58-7/32-0,5-1,5 7/32" 0,5 1,558-1/4-0-0,5 1/4" 0 0,558-1/4-0-1 1/4" 0 1

58-1/4-0,5-1,5 1/4" 0,5 1,5

Part No. Hole diameter Ø DGrip

A B Ø C


• Features : Temporary fastener called as “positioning” with reduced volume designed for thin assembly elements. Can be operated by a robot.

• Standard grip capacity : 3 - 15 mm.


Presentation

Dimensions in mm



Operated by robot-end-effector

Min. Max.3 G9 3 15 80 50

3,2 G9 3 15 80 504,166 G9 3 15 80 505,055 G9 3 15 81,5 50

6 G9 3 15 81 1206,604 G9 3 15 81 120

Hole diameterGrip

AClamping force max.

( daN )

60 030 03 15

Grip max.

Grip min.


Series number

Part number example



Presentation

Part number example

VPA 60 18 D 1 � 09Nut diameterVersion No.(D) Straight type(1) Torque range(8) Motor manufacturerSeries No. of temporary fastenerDriver for temporary fastener


Operated by robot-end-effector








VPA 60 18 D1 09 1 - 2,5 N.m 330 96 180 31 Canelures 17,3 8

Part No. Torque



Drill jig positioningPresentation

Dimensions in mm

Part number example


• Features: Temporary fastener designed for the quick installation and positioning of drilling jig. For hole diameter below 6.35 mm, the hex driving nut is replaced by a cylindrical driving nut of 10mm of diameter for the use of quick installation/removal drivers.



70 48 15-35 12

Bushing diameter "H"

Grip capacity


Series number

Min. Max.3,2 15 35 200 161 44 19,5 11,5 Ø10 12 White Blue 13,2 15 35 200 161 44 20,0 12,0 Ø10 12 Yellow Blue 14,0 20 28 200 103 22 20,0 12,0 Ø10 12 White White 14,1 15 35 250 162 45 19,5 11,5 Ø10 12 White Red 14,1 15 35 250 162 45 21,0 13,0 Ø10 12 Bronze Blue 14,1 15 50 250 176 60 22,0 14,0 Ø10 12 Green Blue 14,2 20 28 250 103 22 20,0 12,0 Ø10 12 Blue Blue 14,8 15 35 350 162 45 20,0 12,0 Ø10 12 Yellow Red 24,8 15 50 350 189 73 19,0 12,0 Ø10 12 Yellow Red 24,8 15 50 350 189 73 19,0 14,0 Ø10 12 Yellow Red 25,0 15 50 350 189 73 19,0 14,0 Ø10 12 Red White 25,0 15 50 350 189 73 19,0 16,0 Ø10 12 Red White 25,8 51 79 350 169 53 19,0 13,0 Ø10 12 White White 26,0 15 50 350 185 68 24,0 16,0 Ø10 16 Red Blue 26,2 15 50 350 185 68 22,0 16,0 Ø10 16 Red Blue 26,2 15 50 350 185 68 24,0 18,0 Ø10 16 Blue Blue 26,2 15 55 350 185 73 26,0 20,0 Ø10 16 Bronze White 26,2 15 60 350 187 83 28,0 22,0 Ø10 16 Green White 26,2 15 70 350 190 93 31,0 25,0 Ø10 16 Yellow White 26,3 55 70 350 190 83 18,0 12,0 Ø10 12 Bronze Red 26,3 15 50 350 177 61 21,0 12,0 Ø10 16 Bronze Red 26,3 15 50 350 177 61 21,0 13,0 Ø10 16 Bronze Red 27,9 15 50 500 187 70 22,0 14,0 0 A / fla 16 Green Red 37,9 15 50 500 187 70 26,0 18,0 0 A / fla 16 Blue Blue 39,5 15 50 800 187 70 24,0 16,0 0 A / fla 16 Red Red 3

11,1 15 50 1150 187 70 26,0 18,0 0 A / fla 16 Blue Red 312,7 15 55 1150 219 95 26,0 20,0 3 A / fla 20 Bronze White 414,3 15 60 1150 245 110 28,0 22,0 3 A / fla 20 Green White 415,9 15 70 1150 258 118 31,0 25,0 3 A / fla 20 Yellow White 4

B G Ø HHole diameter Grip Clamping force max.

( daN )

A F A/flat

EA/flat

Cap color

Stop color

Driver code

advised



Presentation

Part number example











1 VPA 42 27 D1 10 0,6 - 4 N.m 297 83 184 35 19,6 24 16

2 VPA 52 37 D1 10 3,5 - 10 N.m 332 115 184 35 22,6 23,3 253 VPA 75 37 D1 10 3,5 - 10 N.m 319 82 184 35 / 19,5 /4 VPA 70 07 D1 13 3,5 - 12,5 N.m 382 152 184 41 30,6 34 25



Presentation

Part number example


• Features: Temporary fastener designed for installation through drilling jig for rubber sealant application. High clamping force capacity.



81 032 00 25

Grip max.

Grip min.



Dimensions in mm



Min. Max. Body3,20 3,2-3,35 0 25 200 154 71 11,8 Ø10 12 Red White 1-4-8-124,10 4-4,2 0 25 200 151 71 11,8 Ø10 12 Alu White 1-4-8-124,10 4-4,2 20 45 200 169 71 11,8 Ø10 12 Alu Black 1-4-8-124,80 4,7-5 0 25 200 152 71 12,0 Ø10 12 Yellow White 1-4-8-124,80 4,7-5 25 50 200 182 71 12,0 Ø10 12 Yellow Yellow 1-4-8-125,60 5,4-5,7 5 30 200 158 71 12,0 Ø10 12 Orange White 1-5-8-116,30 6,2-6,5 0 25 200 152 71 12,0 Ø10 12 Bronze White 1-5-8-116,30 6,2-6,5 25 50 200 183 71 12,0 Ø10 12 Bronze Black 1-5-8-116,30 6,2-6,5 50 75 200 208 71 12,0 Ø10 12 Bronze Yellow 1-5-8-117,90 7,8-8,4 5 30 500 181 71 15,75 13 A/f lat 20 Yellow White 3-7-107,90 7,8-8,4 30 55 500 206 71 15,75 13 A/f lat 20 Yellow Black 3-7-107,90 7,8-8,4 55 80 500 231 71 15,75 13 A/f lat 20 Yellow Yellow 3-7-107,90 7,8-8,4 80 105 500 256 71 15,75 13 A/f lat 20 Yellow Yellow 3-7-109,50 9,35-10 5 30 500 189 71 15,75 13 A/f lat 20 Green White 3-7-109,50 9,35-10 25 50 500 209 71 15,75 13 A/f lat 20 Green Black 3-7-109,50 9,35-10 55 80 500 239 71 15,75 13 A/f lat 20 Purple Green 3-7-1011,10 10,95-11,6 10 35 500 195 71 17,75 13 A/f lat 20 Black White 3-7-1011,10 10,95-11,6 30 55 500 215 71 17,75 13 A/f lat 20 Black Black 3-7-1012,70 12,55-13,2 15 40 500 202 71 20,0 13 A/f lat 20 Alu White 3-7-1012,70 12,55-13,2 35 60 500 222 71 20,0 13 A/f lat 20 Alu Black 3-7-1014,30 14,1-14,8 20 45 500 226 81 21,0 13 A/f lat 20 Blue White 3-7-1014,30 14,1-14,8 40 65 500 246 81 21,0 13 A/f lat 20 Blue Black 3-7-1015,90 15,7-16,4 30 55 500 239 81 22,0 13 A/f lat 20 Red w hite 3-7-1015,90 15,7-16,4 50 75 500 259 81 22,0 13 A/f lat 20 Red Black 3-7-10

Nominal diameter Hole diameter Grip A L Ø DClamping

force max. ( daN )

Driver code

advised

E NutF / across

f lat Color n°1 Color n°2


Presentation

Part number example


VPA DC 3,2 � 6,3 A(A) Motor manufacturer(3,2 - 6,3) Temporary fastener diameter"D" Straight type"C" Cylindrical nutDriver for temporary fastener













1 VPA DC 3,2-6,3 A 0,6 - 4 N.m 296 67,5 184 35 242 VPA DH 3,2-6,3 A 0,6 - 4 N.m 296 82 184 35 19,53 VPA DH 7,9-15,9 A 3,5 - 10 N.m 390 152 184 41 344 VPA 42 27 D1 10 0,6 - 4 N.m 296 67,5 184 35 245 VPA 42 37 D1 10 3,5 - 10 N.m 296 67,5 184 35 246 VPA 75 27 D1 10 0,6 - 4 N.m 296 82 184 35 19,57 VPA 70 47 D1 13 3,5 - 12,5 N.m 382 152 184 41 34



8 VPA EC 3,2-6,3 A 0,5 - 4,5 N.m 280 67,5 140 33 249 VPA EH 3,2-6,3 A 0,5 - 4,5 N.m 280 88 140 29 16,510 VPA EH 7,9-15,9 A 6 - 15 N.m 315 152 210 41 3411 VPA 42 07 E 11 2,5 - 7 N.m 365 70 125 35 2412 VPA 42 17 E1 10 0,5 - 3 N.m 260 70 133 35 2413 VPA 41 17 E1 10 0,5 - 3 N.m 258 73 128 29 16,5



Presentation

Part number example

Series CCTF/CCTFHTemporary fasteners

• Features: Temporary fastener designed for installation through drilling jig for rubber sealant application. High clamping force performance due to the 4 jaws. Material damage is consequently decreased.



CCTF 0635 25 50

Grip max.

Grip min.



Dimensions in mm

Temporary fastener Threaded type – Concentric collet

Spring loaded – Hex or cylindrical driveHigh clamping performance

Min Max6,2 148,6 6,15 7,8 123 19 8 5 30 Bronze7,8 148,6 7,75 9,6 123 19 8 5 30 Yellow

7,94 139,6 7,85 10 123 19 8 0 25 Yellow7,94 164,9 7,85 10 123 19 8 25 50 Alu7,94 197,5 7,85 10 108,6 19 8 40 65 Alu9,3 158,6 9,3 11,1 123 19 8 15 40 Green

9,52 164,7 9,4 11,4 124,9 19 8 25 50 Alu9,52 179,7 9,4 11,4 124,9 19 8 40 65 Alu25,4 226,6 25,3 31,5 153,2 45 9 55 80 Alu

Temporary fastener

Ø A Ø B Ø C Cap color Driver code advisedØ D Ø E Ø F Grip


Presentation

Part number example

Series CCTF/CCTFH


CCTF 37 D 1 � 10Nut diameterVersion No.

(D) Straight type

(3) Torque range(7) Motor manufacturerSeries No. of temporary fastener

Temporary fastener Threaded type – Concentric collet

Spring loaded – Hex or cylindrical driveHigh clamping performance










1 CCTF 37 D1 10 3,5 - 10 N.m 281,3 42,5 185 35 262 CCTFH 37 D1 9 3,5 - 10 N.m 281,3 42,5 185 35 23,5



Presentation

Part number example

Series R / RG

Temporary fasteners

• Features:Temporary fastener with double threaded stem is intended for fast installation and high production applications. It is produced with a special anti-adhesive coating and the grippers are covered with a Teflon sleeve for resin application.



Dimensions in mm

R 50 10 35

Grip max.

Grip min.


Series numberAdd "G" for clamping through drilling jigs.


Teflon sleeve over grippers

Min Max4,1 10 35 146,5 11 63,5 10 12 935 10 35 136 11 50 10 12 85

6,2 10 35 136,5 11 50 10 12 84,56,2 10 35 148 11 61,5 10 12 966,2 30 55 166,5 11 55 10 12 89,56,2 50 75 186,5 11 55 10 12 89,56,2 70 95 206,5 11 55 10 12 89,56,2 100 125 236,5 11 55 10 12 89,58,1 10 35 155,5 15,8 61 10 14 95,58,1 30 55 175,5 15,8 61 10 14 95,58,1 50 75 195,5 15,8 61 10 14 95,58,1 70 95 216,5 15,8 61 10 14 95,58,1 90 115 236,5 15,8 61 10 14 95,58,1 110 135 256,5 15,8 61 10 14 95,511 10 35 185 20 71 13 18 11611 30 55 205 20 71 13 18 116

12,1 10 35 184,5 20 73 13 18 113,512,1 30 55 204,5 20 73 13 18 113,512,1 50 75 224,5 20 73 13 18 113,512,1 70 95 244,5 20 73 13 18 113,513 30 55 225 27 - //22 95 13 22 130

14,5 50 75 262 27 - //22 95 13 22 14016,1 30 55 247 27 - //22 95 13 22 139,516,1 50 75 267 27 - //22 95 13 22 139,516,1 70 95 287 27 - //22 95 13 22 139,5

Hole diameterGrip

C mm Ø F mm G mm H mm HexI mm

J mm


Presentation

Part number example

SeriesM/ MG

Temporary fasteners

• Features:Temporary fastener with double threaded stem is intended for fast installation and high production applications. It is produced with a special anti-adhesive coating and the grippers are covered with a Teflon sleeve for resin application



M 50 10 35

Grip max.

Grip min.


Series numberAdd "G" for clamping through drilling jigs.

Dimensions in mm


Min Max4,1 10 35 144,5 11 60,5 10 12 955 10 35 146 11 60,5 10 12 955 10 35 135 14 51,5 10 12 84,5

6,2 10 35 149 11 60,5 10 12 956,2 30 55 148 11 60,5 10 12 956,2 10 35 137 14 50,5 10 12 84,56,2 30 55 137 14 55 10 12 89,58,1 10 35 145 15,8 60,5 10 14 968,1 30 55 176 15,8 60,5 10 14 968,1 50 75 196 15,8 60,5 10 14 968,1 70 95 216 15,8 60,5 10 14 968,1 110 135 256 15,8 60,5 10 14 96

12,1 30 55 205 20 73 13 18 113,512,1 50 75 225 20 73 13 18 113,512,1 70 95 245 20 73 13 18 113,516,1 30 55 247 Ø27-//25.4 95 13 22 139,5

G mm H mm HexI

J mmHole diameter

GripC mm F mm


Presentation

Part number example

Series R/ RG M / MG




VPA 51DH 4.1-6.2 A

Provider(4.1-6.2) temporary fastener diameterSeries No. / "D" straight / "H" hexDriver for temporary fastener


High clamping performance








Part No. Torque (Nm) Setting ØA mm ØB mm C mm D mm E mm Ø Temporary Color(s)0.8 ± 0.07 R1

2 ± 0.2 R2WhitePurpleGreen

0.8 ± 0.07 R12 ± 0.2 R2

0.26 ± 0.02 R30.8 ± 0.07 R12.6 ± 0.2 R24.3 ± 0.2 R32.1 ± 0.2 R43.5 ± 0.2 R5

VPA 49EH 7.9-9.5 A 0.8 ± 0.07 R1 25 33 86,5 296 160 7.9 à 9.5 White6.25 ± 0.15 R23.5 ± 0.2 R32.1 ± 0.2 R42.1 ± 0.2 R16.3 ± 0.2 R2

VPA 51DH 4.1-6.2 A 19,5 35 82 285 185 4.1 à 6.2 WhitePurple

VPA 51EH 5-6.2 A 16,5 29 88 280 140 5 à 6.2 PurpleGreen

VPA 49DH 7.9-9.5 A 24 33 86 317 185 7.9 à 9.5 White

VPA 49DH 10.1-12.1 A 30,2 38 119 350 185 10.1 à 12.1 PurpleOrange

VPA 49DH 16.1 A 34 42 132 364 185 16,1 White

VPA 51DH 4.1-6.2-20 A 0.26 ± 0.02 R3 19,5 4.1 à 6.235 82 285 185


DRIVERS CHOICE

MANUFACTURER CodeG. Renault 0Pneumat 2

Fiam 4Atlas Copco 7

Ingersoll Rand 8

Lisi aerospace serial No. :

(2): See list below

(3): Variable torque and rpm

(1): Same driver can be used for different series of temporary fastener

Specific part number

VPA 52 3 7 D 1 - 10

Version No.E - 90° angle typeD - Straight type

Torque range (3) P - Foot type

Diameter (cylindrical nut) / across flat value (hex nut)

Driver for temporary fasteners

Series No. of temporary fastener (1)

Motor manufacturer (2)

VPA 351 D H 5 - 8,2 ADriver for temporary fasteners A AtlasCopco

P Pneumat

I Ingersoll Rand

Series No. of temporary fastener (1) Temporary fastener dia.

H HexD - Straight type C Cylindrical

E - 90° angle type

Note:

For any specific requirement, contact us.All drivers depicted in this catalog are existing.


NOTES

Notes :

Temporary fasteners and associated tooling - ITP · Temporary fasteners and associated tooling ... ...

Documents

Transcript of Temporary fasteners and associated tooling - ITP · Temporary fasteners and associated tooling ... ...