Telestack Tracked Conveyors Brochure
-
Upload
raghavendra-deshpande -
Category
Documents
-
view
131 -
download
3
description
Transcript of Telestack Tracked Conveyors Brochure
Mobile Stockpiling Solutions
Track Conveyors
www.telestack.com
Mobile Stockpiling Solutions
FUEL CONSUMPTION FROM ONLY 5 LITRES (1.32 GALLONS) PER HOUR
Telestack equipment has a proven record of performance and reliability, operating in all types of applications and climates around the world.
Satisfied customers include Cemex, La Farge, Holcim, CRH, Anglo American, Rio Tinto, BHP Billiton, Mechel, Suek and many more.
ELIMINATE / REDUCE THE USE OF WHEEL LOADERS / TRUCKS!
STOCKPILING – RECIRCULATING – LINKING – TRUCK LOADING – SHIPLOADING
Track Conveyors
TC 421 x2 – RECIRCULATING / STOCKPILINGTC 421 STOCKPILING FROM PRIMARY CRUSHER
Eliminate double handling of material with wheel loaders
Stockpiling rates from 100 - 1500TPH*
Stockpiling 0 - 300mm (12inch down) material
Environmental benefits – reduced noise, dust and emissions
Safety benefits - less site traffic movement
Discharge heights up to 12 metres (40ft)
Conical stockpile up to 3,927 tonnes – 2,454m3 (3,210 yrds3 – 4,330 ton)
Radial stockpile up to 15,123 tonnes – 9,452m3 (12,362 yrds3 – 16,670 ton)
*Based on bulk density of 1.6 t/m3 (100lbs / per cubic ft)
STANDARD OPTIONS:Dual power (electric driven belts)
All electrical conveyor
Radio remote control
Upgrades for 0-300mm (0-12”) material
Hydraulic folding tail section
Dust covers
Dust suppression
Automatic stockpile program
Parallel travel tracks
Feed-boot extensions
Side skirting
Anti-roll back measures
AGGREGATES – SAND / GRAVEL – IRON ORE – COAL – FERTILISER – GRAIN – WOODCHIPS
A Discharge heightB Stockpile Height C Conveyor length (Tip to Tip)D Conveyor length (Drum centre)
E Conveyor working angle F Material angle of repose G Conveyor mid section depthH Material not fouling on tracksI Ground clearance and widthJ No added counterweightK Variable feed-in height
A
E F
IH
J
G
B
C
D
K
CRITICAL DESIGN FACTORS INCLUDE:
TC 624 FED FROM WHEEL LOADER DISCHARGING INTO VESSEL – PARALLEL TRAVEL
HF 418 WITH INDEPENDENT FEEDER HEAVY DUTY TRACKED TELESCOPIC AS LINK CONVEYOR FROM PRIMARY CRUSHER TO SECONDARY PLANT
Low loader – RO - RO Transport Loaded into 1 x 40ft container
Telestack LimitedBankmore Way East Omagh, Co. Tyrone Northern Ireland BT79 0NZ
TRANSPORTATION & CONTAINERISATION
The ease of transport of these units makes it very easy and cost efficient for transporting these units globally. Each Unit can be transported on a low loader trailer to move easily from site to site. Set up time on site is 15 minutes. Each unit can be packed into 1 x 40ft container and shipped anywhere in the world.
The Telestack factory is a state of the art manufacturing facility to ensure the highest standard of workmanship of all products.The customized heavy duty design and manufacturing processes are key to the success of the Telestack range of equipment in many different applications and industries globally.
8,000sq metres production facility
Established 1999 as the specialist materials handling division of Loughside Engineering (est.1985)
Highly experienced specialist workforce
Complete in-house design, manufacture, installation and commissioning of all equipment
Units fully built and tested prior to dispatch
Facsimile +44 (0)28 8225 2211
Telephone +44 (0)28 8225 1100
Despite the economic downturn, the demand for Telestack track conveyors has continued to increase. The main reason for this is the proven savings they offer crushing / screening customers. The continued success shows Telestack’s drive to offer innovative and cost effective solutions. Our track conveyors have been installed in 5 continents since 2007 in many different applications including stockpiling, shiploading / unloading and link conveyors.
www.telestack.com