HI -MOTIONS Sr l

Via del l ’ Indus tr ia, 91

36030 Sarcedo ( VI ) ITALY

T +39 0445 367536

F +39 0445 367520

info@himotions.i t

w w w.himotions.i t

himot ions . i t

Several solutions exis t for closing an industr ial or residential access pointIn most s i tuat ions, the bes t c los ing solut ions are s l id ing doors, because they are ver y f lex ible and provide greater poss ibi l i t ies for managing the passage of heav y vehic les.

Why you should choose a telescopic s l iding gateDif ferent t ypes of s l id ing gates are avai lable to of fer a range of solut ions for each applicat ion. In par t icular, i f manoeuvr ing space is l imited, the ideal solut ion for c los ing large access point s is the telescopic s l id ing gate. This solut ion makes i t poss ible to minimise as much as poss ible the space occupied by the gate in the manoeuvr ing space.

HI -MOTIONS has designed a new range of accessor ies for the cons truc t ion of te lescopic s l id ing gates with t wo or more panels that s l ide on the same number of t racks on the ground. They also make k i t s containing the accessor ies necessar y for assembling a te lescopic sys tem.

Why choose HI-MOTIONS systems· The opt ion of ins tal l ing the gate

with t wo f ix ing modes: lower or lateral.

· Help with the ins tal lat ion process through a v ideo tutor ial that quick ly and eas i ly explains the main phases of the process.

Less space, more speedTelescopic gates al low an access point to be opened at t wice as fas t as a t radit ional s l id ing gate.

Telescopic s l id ing gates

TELESCOPICSLIDING

GATES

HI -MOTIONS Sr l

Via del l ’ Indus tr ia, 91

36030 Sarcedo ( VI ) ITALY

T +39 0445 367536

F +39 0445 367520

info@himotions.i t

w w w.himotions.i t

himot ions . i t

Several solutions exis t for closing an industr ial or residential access pointIn most s i tuat ions, the bes t c los ing solut ions are s l id ing doors, because they are ver y f lex ible and provide greater poss ibi l i t ies for managing the passage of heav y vehic les.

Why you should choose a telescopic s l iding gateDif ferent t ypes of s l id ing gates are avai lable to of fer a range of solut ions for each applicat ion. In par t icular, i f manoeuvr ing space is l imited, the ideal solut ion for c los ing large access point s is the telescopic s l id ing gate. This solut ion makes i t poss ible to minimise as much as poss ible the space occupied by the gate in the manoeuvr ing space.

HI -MOTIONS has designed a new range of accessor ies for the cons truc t ion of te lescopic s l id ing gates with t wo or more panels that s l ide on the same number of t racks on the ground. They also make k i t s containing the accessor ies necessar y for assembling a te lescopic sys tem.

Why choose HI-MOTIONS systems· The opt ion of ins tal l ing the gate

with t wo f ix ing modes: lower or lateral.

· Help with the ins tal lat ion process through a v ideo tutor ial that quick ly and eas i ly explains the main phases of the process.

Less space, more speedTelescopic gates al low an access point to be opened at t wice as fas t as a t radit ional s l id ing gate.

Telescopic s l id ing gates

TELESCOPICSLIDING

GATES

A S

LALA = [(A+B)/2] + S

S60

T T60

T T60

B

min. 30

himot ions . i t h imot ions . i t

7

11

5 2

121 4

3

8

6

9

10

1 2 3 4 5 6

7 8 9 10 11 12

+2x

Door 1: Max imum weight ( kg )

Door 2: Max imum weight ( kg )

Tota l Max imumWeight ( kg )

Door 1:Speed (m/min)

Door 2:Speed (m/min) Cable Ø (mm)

40 0 40 0 80 0

9 18

4

450 450 90 0 5 [s t a in les s s tee l ]

60 0 60 0 120 0 5

350 350 70 0

12 24

4

40 0 40 0 80 0 5 [s t a in les s s tee l ]

50 0 50 0 10 0 0 5

250 250 50 0

15 30

4

30 0 30 0 60 0 5 [s t a in les s s tee l ]

450 450 90 0 5

20 0 20 0 40 0

18 36

4

250 250 50 0 5 [s t a in les s s tee l ]

40 0 40 0 80 0 5

150 150 30 0

21 42

4

20 0 20 0 40 0 5 [s t a in les s s tee l ]

30 0 30 0 60 0 5

Cable selec tion table:

The bes t cable and the sys tem operat ion l imit s are ident i f ied depending on the dimens ioning of the door panels and their manoeuvr ing speed.

In this case, the pul ley box is pos i t ioned under the door. The cable running underneath the lower par t a l lows e l iminat ing the aes thet ic impac t, a lso thanks to the s ide guards (281.11). This t ype of assembly a l lows ins ta l l ing more than t wo doors . I t i s necessar y to cons ider the minimum wheel d iameter (min. 120 mm) and the T door prof i le d imens ions (min. 60 mm, max. 120 mm).

A (m)B (mm) S (mm) T (mm)

Notes[recommended] [minimum] [recommended]

up to 4 m 50 40 0 60 -120 use one guide bracket (283.30X-283.40X )

more than 4 m 150 80 0 60 -120 use two guide bracket s (283.30X-283.40X )

Bot tom mounting:In this case, the pul ley box is ins ta l led on the s ide of the door, which al lows e l iminat ing the cons t ra int s of wheel d iameter and T door prof i le d imens ions. This conf igurat ion does not a l low ins tal l ing more than t wo doors .

HI -MOTIONS reminds c l ient s that for cor rec t ins ta l lat ion,

in compl iance wi th appl icable s tandards, i t i s necessar y to comply wi th minimum safet y d is tances as wel l as to ver i f y the operat ive force wi th in the sys tem.

A (m)B (mm) S (mm) T (mm)

[recommended] [minimum] [recommended]

up to 4 m 50 40 0 any

more than 4 m 150 80 0 any

Side mounting:

Technical drawing and minimum measurements:

DOOR 2 DOOR 1

Watch the assembly ins t ruc t ion v ideo.

Telescopic s l id ing gates Te lescopic s l id ing gates

Available in var ious t ypes of k it .

Components of the telescopic sys tem:

Galvanized cable covers for bot tom/side mounting

Galvanized f ixed pulley box for cable

Galvanized adjustable pulley box for cable

Galvanized cable ground f ix ing bracket

Galvanized connec tion bracket between the two leaves

Galvanized L-bracket for t rack 283

Galvanized track cap

Galvanized guide bracket with 4 rollers CableGalvanized track

Adjustable guide plate to be screwed

Galvanized wheel with internal suppor t

281.11281.21 282.401

282.501282.411282.511

282.521282.541

282.531282.551

283.011

283.013283.014

283.30X283.40X 284.401

284.501284.503

283.3X X283.4X X

283.200283.201

109.120T111.120T

A S

LALA = [(A+B)/2] + S

S60

T T60

T T60

B

min. 30

himot ions . i t h imot ions . i t

7

11

5 2

121 4

3

8

6

9

10

1 2 3 4 5 6

7 8 9 10 11 12

+2x

Door 1: Max imum weight ( kg )

Door 2: Max imum weight ( kg )

Tota l Max imumWeight ( kg )

Door 1:Speed (m/min)

Door 2:Speed (m/min) Cable Ø (mm)

40 0 40 0 80 0

9 18

4

450 450 90 0 5 [s t a in les s s tee l ]

60 0 60 0 120 0 5

350 350 70 0

12 24

4

40 0 40 0 80 0 5 [s t a in les s s tee l ]

50 0 50 0 10 0 0 5

250 250 50 0

15 30

4

30 0 30 0 60 0 5 [s t a in les s s tee l ]

450 450 90 0 5

20 0 20 0 40 0

18 36

4

250 250 50 0 5 [s t a in les s s tee l ]

40 0 40 0 80 0 5

150 150 30 0

21 42

4

20 0 20 0 40 0 5 [s t a in les s s tee l ]

30 0 30 0 60 0 5

Cable selec tion table:

The bes t cable and the sys tem operat ion l imit s are ident i f ied depending on the dimens ioning of the door panels and their manoeuvr ing speed.

In this case, the pul ley box is pos i t ioned under the door. The cable running underneath the lower par t a l lows e l iminat ing the aes thet ic impac t, a lso thanks to the s ide guards (281.11). This t ype of assembly a l lows ins ta l l ing more than t wo doors . I t i s necessar y to cons ider the minimum wheel d iameter (min. 120 mm) and the T door prof i le d imens ions (min. 60 mm, max. 120 mm).

A (m)B (mm) S (mm) T (mm)

Notes[recommended] [minimum] [recommended]

up to 4 m 50 40 0 60 -120 use one guide bracket (283.30X-283.40X )

more than 4 m 150 80 0 60 -120 use two guide bracket s (283.30X-283.40X )

Bot tom mounting:In this case, the pul ley box is ins ta l led on the s ide of the door, which al lows e l iminat ing the cons t ra int s of wheel d iameter and T door prof i le d imens ions. This conf igurat ion does not a l low ins tal l ing more than t wo doors .

HI -MOTIONS reminds c l ient s that for cor rec t ins ta l lat ion,

in compl iance wi th appl icable s tandards, i t i s necessar y to comply wi th minimum safet y d is tances as wel l as to ver i f y the operat ive force wi th in the sys tem.

A (m)B (mm) S (mm) T (mm)

[recommended] [minimum] [recommended]

up to 4 m 50 40 0 any

more than 4 m 150 80 0 any

Side mounting:

Technical drawing and minimum measurements:

DOOR 2 DOOR 1

Watch the assembly ins t ruc t ion v ideo.

Telescopic s l id ing gates Te lescopic s l id ing gates

Available in var ious t ypes of k it .

Components of the telescopic sys tem:

Galvanized cable covers for bot tom/side mounting

Galvanized f ixed pulley box for cable

Galvanized adjustable pulley box for cable

Galvanized cable ground f ix ing bracket

Galvanized connec tion bracket between the two leaves

Galvanized L-bracket for t rack 283

Galvanized track cap

Galvanized guide bracket with 4 rollers CableGalvanized track

Adjustable guide plate to be screwed

Galvanized wheel with internal suppor t

281.11281.21 282.401

282.501282.411282.511

282.521282.541

282.531282.551

283.011

283.013283.014

283.30X283.40X 284.401

284.501284.503

283.3X X283.4X X

283.200283.201

109.120T111.120T

HI -MOTIONS Sr l

Via del l ’ Indus tr ia, 91

36030 Sarcedo ( VI ) ITALY

T +39 0445 367536

F +39 0445 367520

info@himotions.i t

w w w.himotions.i t