TECO Electronics AS - ShipServ · TECO Electronics AS. ... Maintenance of old systems possible due...
15
TECO Electronics AS Marine Electronics TECO Electronics AS
Transcript of TECO Electronics AS - ShipServ · TECO Electronics AS. ... Maintenance of old systems possible due...
TECO Electronics AS
Marine Electronics
TECO Electronics AS
Teco Electronics AS
PORSGRUNN
NORWAY SINGAPOREROTTERDAM
TECO Electronics AS
Marine Electronics
TECO are able to conduct repairs and maintenance onboard ships while in
service, during dry-docking, at anchorage or in our workshops around the world.
TECO s flexibility is the key figure for our customers and services. Planning
together is necessary to carry out the work in accordance with the vessels
trading pattern to avoid off-hire.
TECO is an approved service partner for Norris, Krohne-Skarpenord, Honeywell
(Eltekand Enraf), Jowa, Emerson Process Management (MEP), and repair
equipment from most international manufacturers.
TECO also help customers to keep certificates for calibration equipment up to
date, by performing compulsory annual certification as well as supplying new
test equipment.
TECO s qualified professionals have long and varied experience, offering our
customers a high quality and flexible service.
TECO Electronics AS
Marine Electronics
TECO is a specialist supplier of technical services and products within the industry.
We operate within the following fields:
Electronic Circuit Boards
Automation and Maintenance of existing Control and Monitoring Systems
Calibration and Marine Test Equipment
Service partners
Repair and maintenance of electronic control system onboard vessels while at sea,
incl PCB repairs. Testing and calibration of control and alarm systems.
TECO Electronics AS
Marine Electronics
Voyage repair
Our service engineers travel world wide to perform a range of services onboard vessels .
A/E Alarm/Start/Stop Automatics.
Battery chargers/Power supplies.
Bridge remote control systems.
Cargo alarm/Monitoring systems.
Level, 95/98%, temp, press, vacuum, gas.
Compressor controls.
Deck crane automations.
Fire alarm systems.
Generator/Switchboard (GAC, AVR).
M/E alarm/Monitoring systems.
Separator controls (oil, water).
Complete recondition of existing alarm systems
for M/E and Cargo monitoring during voyage.
PCB repairs with Portable Electronic Workshop.
Repair/upgrade of existing M/E alarm system to
meet E0 (unmanned) Class requirements.
Repair and preventive maintenance of deck
Crane Automation including PCBs during voyage.
Trouble shooting, repair and preventive
maintenance on most Alarm-and Automation
system onboard.
TECO Electronics AS
Marine Electronics
We repair and handle equipment from most international manufacturers, incl. small and
out off-business companies.
Our electronic services have expanded to a considerable volume over the years as our
customers have discovered all the advantages of this service.
Existing units are reconditioned for a fraction of new unit price.
Fixed prices in advance.
One shipment address gives lower cost, less paperwork, shorter delivery time.
Low turndown rate, high Quality/Customer satisfaction guarantee.
Personal and flexible customer support.
Maintenance of old systems possible due to our stock of obsolete and hard-to-
find spare parts.
Our Norcontrol AutoChief II
test station
TECO Electronics AS
Marine Electronics
Almost all PCB cards can be reconditioned
M/E Alarm/Monitoring Systems
A/E Alarm/Start/Stop Automatics
Cargo Alarm/Monitoring systems (level, temp, press, vacuum, gas)
Bridge remote control systems
Deck crane automation
Generator/Switchboard (GAC, AVR)
Separator controls (oil, water)
Battery chargers/Power supplies
Fire alarm systems
Compressor controls
Boiler/Burner controls
Gas monitoring systemsValmet Damatic Classic Test
station
TECO Electronics AS
Marine Electronics
PCB reconditioning
It is a huge different between repair and reconditioning.
TECO Electronics AS
Marine Automation
Marine AutomationTECO Electronics AS offers turn key retrofit solutions for a range of different automation
systems like engine room alarm & monitoring systems, bridge remote control systems,
power management systems and fire alarm systems & gas detection systems.
We have long and good experience with retrofit whilst ship is in service and during dry-dock,
our aim is to be flexible in order to avoid off-hire costs for our customers.
We can offer a total package from overhaul to retrofit depending on needs and specifications.
Engineroomalarm & monitoringsystems
Bridge remotecontrolsystems
Power managementsystems
Fire alarm systems
Gas detectionsystems
TECO Electronics AS
Marine Calibration
In addition to sales of this Test/Calibration Cases our calibration department in Norway,
Rotterdam and Singapore offers repair, calibration and certifications of portable
instruments and calibrations like;
On-Board Preventative, Meets SOLAS ISM regulation,
ALL in one test case.
TECO offers to keep records of all instruments calibrated. In the Annual Certification Procedure, a
reminder is sent to the customer 1 month prior to expiry date of the instrument Calibration Certificate.
Gas detectors (O2, H2S, CO, HC, Alco meters).
AVO-meters (Ampere, Volt, Ohm).
Sensor simulator (Ma, V, Mv, Ohm/Pt100).
Pressure Calibrators.
Pressure Indicators.
Temperature Calibrations.
Temperature Indicators.
TECO Electronics AS
Service Reference list & Partners
AEG
Alfa Laval
Allen-Bradley
Alsthom
A-S Telesystemer
ASEA
Aspo
Atlas
Auer
Auto Maskin
Autronica
Auxitrol
Baelz
Barton
Basler Electric
Bergan
BOUYER
BQW
Bristol Babcock
BY Control
C.S.I
Cathelco
Cerberus
CMR
CMS
CommandeS De Pilotage
Corroteam
Daihatsu Diesel
Daito Instrument co ltd
Decca
Deckma
Deif
Delco
DRA Dansk Radio AS
DAAB
Eekels
Elreg
El-trade
Ero Electronic
Eur-Control
Foxboro
Frydenbø
Fuji
Gestra
GME-Systems
Graviner
HDW
Honeywell
Ian-Conrad Bergan
Ifeas
IHI
Indikon Company
Inor
Intercontrol
Intronic
ITT
Janssen
Jowa
JRC Japan Radio
Company
JRCS
Juckheim M. K.
Katadyn
Kawasaki / Sasakura
KDG Instruments
KDG Mobrey ltd
Komyo Rikagaku Kogyo
Kværner Eureka AS
LGA
Liebherr
Lips B.V.
LK NES
Lyngsø
Malling
Maritek
Matre & CO
Mekatronik
Merlin Gerin
Micro Motion
Mitsubishi
Mitsui
Modicon
Moland / Macon
Mook & Co
More
Mfg. Co.,Ltd. Moss
Rosenborg Verft
MSA
MTL
Musasino
Müller&Weigert
NAF
Navitron
NDC
Nea Lindberg
NEBB
Nera GmbH
Newport Omega
Nippon Zossen Kikai
Nohiki Hosai Kogyo
Norcontrol
Noris
Ohkura
Oilon
Okamoto
Oltronix
Omicron
Osaka Denetsu Kogyo
Oy
Penny & Giles
Philips
Phonico
Pleiger Elektronik
Porsgrunn Steering Gir
AS
Powec
Paab
RDK Rika Denki
Rietschoten & Houwens
Rixius
Robertson
Rosemount
Sabroe Marine
Sailor
Sasakura
Satt Electronics
Sauer
Sauter
Scana Moland
Scana servoteknikk
Scana Skarpenord
Schaller
Schottel
Sea Way
Selco
Semco
Shimadzu Corporation
Shinko
Shonan Kosausho
Siemens
Signalco
Simrad
Skanti Radio
Solatron Mobrey
Stal
Status Instruments
Steenhans
Strømberg
Suhr
Sulzer
Saab
Saab Scania
Saacke
Taiyo
Tandberg Data
Terasaki
Texon
Toshiba
Uchida
Uljanik
Ulstein
Uzushio
Valmet
Vingtor Marine
Wanson
Weishaupt / Somy
Wartsila AB / strømberg
Whesso
Willet Printos
Wärtsilä
Yamatake-Honeywell
Yokogawa Electric Works
YEW
Zimmer
TECO Electronics AS
Marine Services
About TECO Since 1994 TECO has supplied highly specialized technical products and services to the
marine and the offshore industry.
We believe that know-how, personal services and good logistics combined with adedicated
staff are vital factors into day’s market. Currently TECO has a shore staff of about 80
people based in offices world wide; Oslo, Porsgrunn, Bergen, Rotterdam and Singapore. In
addition to about 300 workers on board vessels performing ballast tankcoating, servicing
automation equipment, cleaning cargotanks and generalship-repair.
TECO Electronics AS
Vision, Mission, Strategies and Values
Vision
TECOs vision is to be a preferred and reliable provider of high quality voyage repair and maintenance
onboard ships, rigs and platforms while at sea.
Mission
TECOs mission is to optimize the businessconcept and incooperation with the customers streamline the
maintenance program for any ship, rig or platform in operation. Thereby,
TECO will be a valuable contributor to the customers which shall ensure a better turnaround and less
downtime for their operative fleet.
Strategy
TECOs strategy is to be innovative and future-oriented.
To offer turn-key, high quality, cost efficient voyage repairs to vessels, offshore rigs and platforms for
maintaining while at sea.
Continual process in line with ISO9001 requirements.
Values
TECO knows the fact that our goals will only be achieved by having a dedicated and safety minded staff.
TECO strives to ensure the best possible working condition and environment for all employees.
TECO shall ensure that the company’s personnel are educated and skilled for the work tasks given.
TECO Electronics AS
Main activities
TECOs main activities:
Coating Services
Marine Electronics
Tank Cleaning and Supercargo services
General Shiprepair and Maintenance
TECO Electronics AS
Groupoffices and addresses:
TECO Coating AS, Oslo
Lysaker Torg No. 8. 1327, Lysaker Norway
Tel: + 47 67 200 300 -Fax: + 47 67 200 301
E-mail: [email protected]
TECO Chemicals AS,
TollbodallmenningenNo. 1B, 5004 Bergen Norway
Tel: + 47 55 21 21 50 -Fax: + 47 67 200 381
E-mail: [email protected]
TECO Maritime ASA
Lysaker Torg No. 8. 1327 Lysaker, Norway
Tel: + 47 67 200 300 -Fax: + 47 67 200 301
E-mail: [email protected]
TECO Maritime Benelux BV
Puntweg 3, 3208 LD Spijkenisse, The Netherlands
Tel: + 31 181 600 780 -Fax: + 31 181 600 799
E-mail: [email protected]
TECO Electronics AS
Tormod Gjestlands veg 51, 3908 Porsgrunn, Norway
Tel: + 47 35 560 300 -Fax: + 47 35 560 301
E-mail: [email protected]
TECO Maritime Far East Pte. Ltd. Spore
8 Boon Lay Way, 609964 Singapore
Tel: + 65 6777 7052 - Fax: + 65 6777 8136
E-mail: [email protected]
TECO Coating LLC ,
Al Jadaf Shipyard Dubai, U.A.E.
P.O.Box62487 Dubai, U.A.E.
Tel: + 971 4 324 2727 -Fax: + 971 4 324 2800
E-mail: [email protected]
