TechTalk: 3D Printing

download TechTalk: 3D Printing

of 29

  • date post

    18-Nov-2014
  • Category

    Technology

  • view

    339
  • download

    0

Embed Size (px)

description

Glenn Adam's Tech Talk on 3D Printing at LVTech August 2013.

Transcript of TechTalk: 3D Printing

  • 1. (aka 3D Printing) Additive Manufacturing Glenn Adams gj@gjadams.com
  • 2. (President Obama talks about 3D printing, starting at 14:54) http://www.whitehouse.gov/state-of-the-union-2013 http://namii.org/resources/logos/ http://www.putmanplanninganddesign.com/FabLab.html
  • 3. http://www.clubpenguinsaraapril.com Educated Consumer Conversational Ready to Hack Ready To Innovate
  • 4. http://wordlesstech.com/2013/03/19/nanoscale-3d-printed-microstructures/ equal to the diameter of a human hair
  • 5. http://3dprintingindustry.com
  • 6. http://www.esa.int/Highlights/Lunar_3D_printing
  • 7. http://inhabitat.com/the-solar-powered-sinter-3d-printer-turns-desert-sand-into-glass/
  • 8. http://www.contourcrafting.org/
  • 9. Type Technologies Materials Extrusion Fused deposition modeling (FDM) Thermoplastics (e.g. PLA, ABS), HDPE, eutectic metals, edible materials Wire Electron Beam Freeform Fabrication (EBF3) Almost any metal alloy Granular Direct metal laser sintering (DMLS) Almost any metal alloy Electron beam melting (EBM) Titanium alloys Selective laser melting (SLM) Titanium alloys, Cobalt Chrome alloys, Stainless Steels, Aluminium Selective heat sintering (SHS)[citation needed] Thermoplastic powder Selective laser sintering (SLS) Thermoplastics, metal powders, ceramic powders Powder bed and inkjet head 3d printing, Plaster-based 3D printing (PP) Plaster Laminated Laminated object manufacturing (LOM) Paper, metal foil, plastic film Light polymerised Stereolithography (SLA) photopolymer Digital Light Processing (DLP) photopolymer http://en.wikipedia.org/wiki/3D_printing
  • 10. DMLS http://www.custompartnet.com/wu/direct-metal-laser-sintering
  • 11. http://blog.ponoko.com/2012/02/08/3d-printed-lower-jawbone-transplanted-into-an-83-year-old-woman/
  • 12. http://formlabs.com/
  • 13. http://www.flickr.com/photos/bre/3458247336/ http://reprap.org/wiki/File:Builder.jpg http://en.wikipedia.org/wiki/File:First_replication.jpg
  • 14. http://www.youtube.com/watch?v=WoZ2BgPVtA0 Emma was born with her legs folded up by her ears, her shoulders turned in. She could only move her thumb
  • 15. http://www.123dapp.com/create
  • 16. http://www.thingiverse.com/explore/featured/3d-printing
  • 17. http://www.repetier.com/documentation/repetier-host/object-placement/
  • 18. http://meshlab.sourceforge.net/images/screenshots/SnapMeshLab.align2.png
  • 19. http://cloud.netfabb.com/
  • 20. http://www.hotmelt.com/blog/color-glue-sticks-glitter-glue-sticks-a-craftsters-dream
  • 21. http://en.wikipedia.org/wiki/File:Rapid_prototyping_slicing.jpg
  • 22. http://www.repetier.com/documentation/repetier-host/gcode-editor/
  • 23. http://reprap.org/wiki/RAMPS_1.4 http://commons.wikimedia.org/wiki/File:Arduino_Uno_logo.png
  • 24. http://reprap.org/wiki/Marlin https://github.com/ErikZalm/Marlin Marlin 3D Printer Firmware
  • 25. http://reprap.org/wiki/CAM_Toolchains
  • 26. http://meganlattereviews.wordpress.com/tag/fish-and-chips/
  • 27. Glenn Adams Facebook https://www.facebook.com/glenn.jay.adams Email gj@gjadams.com LinkedIn http://www.linkedin.com/in/gjadams