Technologies and equipment

for animal husbandry

ISO 9001:2008

Construction of livestock breeding farms from

50 to 1200 head

- Construction of new facilities to create the best conditions for keeping animals, distribution of forage,

- design of new buildings with metal structures, reduces labor costs, terms of manufacturing, installation, financial cost for construction- lifetime of new buildings - 50 years

- depending on the number of places for animals determined by the area needed for construction new complex compliance with all sanitary, fire, technical standards, download forage base.

getting milk, manure removal

- If is premises for the reconstruction our specialists carry out exit for all necessary measurements, detection suitability building for reconstruction, survey of the construction and the possibility of its further operation

- important factor in keeping animals is the lighting and ventilation building. Depending on location in the region, projecting light-ventilating device

- after these measures held technological design compliance with all standards and determining the cost of reconstruction

- Reconstruction of buildings for tethered and non- tethered keeping animals

Pipe-line milking installations model 100 and model 200

On dairy farms with more than 50 cows, for milking in stalls are used pipe-line milking installations model 100 and 200 "Bratslavchanka" in combination with in pair-milking device, with the increased volume of a collector.

In comparison with bucket milking the productivity increases on 28%, while the labor input decreases on 30% and milk yield increases on 10-15% per cow.

Milking unit consists of stainless steel pipes and plastic milk line, galvanized steel pipes vaсuum-line, installed over stalls cowshed. Milking machines are connected to the milk-line and vaсuum-line with help combined milks-vacuum cranes. In a special room mounted system of primary processing of milk and washing system. Drive propulsion system milking plant electric. In the work of milking the milking plant is based onthe principle of sucking of milk from milking teatcows under action of vacuum, created in the systempipeline vacuum pump. Milk from the milkingapparatus ingoing in the indicator accounting of milk or directly into the milk-line. For the milk-line ittransported to dosers milk, of dosers in receiver milk, separated from the air and milk pump

through the filter is pumped into the reservoir.

flushing parameters cleaning suctioned from the tank washing machine through the milking machines and then through the whole system of dairy pipeline enters the receiver of milk. From the receiver milk, a cleaning solution is pumped into the tank.

Milking installations

1 – vacuum installations;2 – pipe-line;3 – line flushing;4 – receiver milk;5 – tank to collect milk;6 – machine flushing;7 – electric heater;8 – vaсuum-line.

The main components of the milking machines and their characteristics

# Name Brief descriptionNumber of seats

50 100 200

1 Milk-lineНаружный диаметр трубы из нержавеющей стали 45 мм

1 1 1

2 Vacuum-line Pipe diameter: 1 "11 / 2" and 2 " 1 1 1

3 Receiver milkCapacity of 50 dm3

automatic pumping milk1 1 1

4 Milking equipment Milking machine milking paired. 3 6 12

5 machine flushing Stainless pipe with washing heads 1 1 2

6 Milk dispenserType of discrete

air hydraulic2 2 4

7Installation

vacuum Universal: 6045

See operational documents to a vacuum apparatus1

1 2

8 Indicator accounting milk See the operating documents device 3 6 6

9 Filter Type of tubular filter element with single-use 1 1 1

10 Pump milk universal See the operating documents pump 1 1 1

Milking parlour equipment model 16 “Herringbone”

Installation for milking in the halls of the type “Herringbone” designed for milking cows in group looms of the type “Herringbone” and primary processing of milk.

The installation is used on farms with livestock from 200up to 500 animals, predominantlywith the box-loose housingcontent of cows, with the average yield of milk not less than 3000 kgfrom the cow.

The Installation is designed to execute the following operations:•rinsing of dairy equipment before milking;•launch cows at milking parlor and machine tools;•washing of, preparation for milking and udder health checks;•donning the milking machines;•machine milking;•final phase of the milking - automated;•removal of milking machines;•yield of cows from the machine and the milking parlor;

Device and Operation

accounting milk yield per cow and sampling to determine the fat content of milk;filtration and transport of milk into a storage container;washing milking equipment and the milk line

MACHINESTECHNOLOGY LINE MILKING EQUIPMENTROCKER FOR MILKINGDRIVE GATESLINE FLUSHINGMILK LINEVACUUM LINEMACHINE FLUSHING \

INSTALLATION OF AUTOMATIC

MILKING