Technische Daten Technical Data Caractéristiques ...1).pdf · conçue selon la norme DIN 15018,...

38
LTM1250/1 Technische Daten Technical Data Caractéristiques techniques Mobilkran Mobile Crane Grue automotrice Teleskopausleger Telescopic boom Flèche télescopique 72 m View thousands of Crane Specifications on FreeCraneSpecs.com View thousands of Crane Specifications on FreeCraneSpecs.com

Transcript of Technische Daten Technical Data Caractéristiques ...1).pdf · conçue selon la norme DIN 15018,...

LTM1250/1

Technische DatenTechnical DataCaractéristiques techniques

MobilkranMobile CraneGrue automotrice

Teleskopausleger

Telescopic boom

Flèche télescopique

72 m

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

2

33,544,556789

10

1214161820222426283032343638404244

11

4648505254565860626466

33,544,556789

101112141618202224262830323436384042444648505254565860626466

25017315714413612311210293847463

15,5 m*

20,7 m 25,9 m 31,1 m 36,3 m 41,5 m 46,7 m 51,9 m 57,1 m 62,3 m

m m

15,5 m – 72 m 360° 97,5 t

Die Traglasten amTeleskopausleger.Lifting capacities ontelescopic boom.Forces de levage à la flèche télescopique.

Sein größtes Lastmoment ist 840tm.

Für die Kranberechnungen gelten die DIN-Vorschriften lt. Gesetz gemäß Bundes-arbeitsblatt von 2/85: Die Traglasten DIN/ISOentsprechen den geforderten Standsicher-heiten nach DIN 15019, Teil 2 und ISO 4305.Für die Stahltragwerke gilt DIN 15018, Teil 3.Die bauliche Ausbildung des Krans entsprichtDIN 15018, Teil 2 sowie der F. E. M.Bei den DIN/ISO-Traglasttabellen sind inAbhängigkeit von der Auslegerlänge Wind-stärken von 5 bis 7 Beaufort zulässig.Die Traglasten sind in Tonnen angegeben.Das Gewicht des Lasthakens bzw. der Haken-flasche ist von den Traglasten abzuziehen.Die Ausladungen sind von Mitte Drehkranzgemessen.Traglaständerungen vorbehalten.Traglasten über 135 t nur mit Zusatzeinrich-tungen.

When calculating crane stresses and loads,German Industrial Standards (DIN) are appli-cable, in conformity with German legislation(published 2/85): The lifting capacities(stability margin) DIN/ISO are as laid downin DIN 15019, part 2, and ISO 4305. Thecrane’s structural steel works is in accord-ance with DIN 15018, part 3. Design and con-struction of the crane comply with DIN 15018,part 2, and with F. E. M. regulations.For the DIN/ISO load charts, depending on jiblength, crane operation may be permissible atwind speeds up to 5 resp. 7 Beaufort.Lifting capacities are given in metric tons.The weight of the hook blocks and hooksmust be deducted from the lifting capacities.Working radii are measured from the slewingcentreline.Subject to modification of lifting capacities.Lifting capacities above 135 t only with specialequipments.

La grue est calculée selon normes DIN con-formément au décret fédéral 2/85. Les chargesDIN/ISO respectent les sécurités au bascule-ment requises par les normes DIN 15019, par-tie 2 et ISO 4305. La structure de la grue estconçue selon la norme DIN 15018, partie 3. Laconception générale est réalisée selon lanorme DIN 15018, partie 2, ainsi que selon lesrecommandations de la F. E. M.Les charges DIN/ISO tiennent compte d’ef-forts au vent selon Beaufort de 5 à 7 en fonc-tion de la longueur de flèche.Les charges sont indiquées en tonnes.Les poids du crochet ou de la moufle sont àdéduire des charges indiquées.Les portées sont prises à partir de l’axe derotation de la partie tournante.Charges données sous réserve de modifica-tion.Forces de levage plus de 135 t seulement avecéquipements supplémentaires.

Anmerkungen zu den Traglast-tabellen.

Remarks referring to loadcharts.

Remarques relatives aux tableauxdes charges.

1.

2.

3.4.

5.

6.7.

1.

2.

3.4.

5.

6.7.

1.

2.

3.4.

5.

6.

7.

DINISO

LTM1250/1

17617315714413612311210191837463

13513513412711510496898376695849,525,8

00000

9292929292

100100100100100

0/ 0/ 046/ 0/ 0

0/ 0/

0/46/ 00/ 0/ 0

46

46/ 0/ 046 / 046/46/46

/46

/92

0/ 00/ 0/46

46/ 0/ 046 / 0

/ 0/46

0/460/ 0/460/ 0/46

46/46/ 092 /4646 /460

/46/46/46/46

0/ 0/46

46/ 0/ 04646/4646/4646

/92/46/46/46

/46/92

92/46/ 0464646/46/9246/92/92

/46/46/46/46

92/46/46924646/46/9246/46/92

/92/46/92/46

92/46/46929246/92/9246/46/92

/92/46/92/92

92/46929292/9246/92

/92/92

TAB 131003 / 131195

IIIIIIIVV

IIIIIIIVV% %

* nach hinten / over rear / en arrière

11711711610910092857973695849,54337,532,5

8686848279746965574942,53732,528,925,821,1

717069686562585246,542,53833,53128,425,723,421,5

555554545351464238,535,532,53027,624,922,620,618,817,315

4342,540,538,53733,529,927,225,223,722,421,12018,918,117,416,816,215,414,36,3

33,533,532,531,529,226,624,322,12018,417,216151413,112,61211,611,110,610,29,8

26,226,226,224,823,321,619,918,41715,614,413,312,511,71110,39,89,28,88,37,97,67,46,6

20,720,720,619,918,917,716,515,414,413,412,511,710,910,29,698,58,17,77,476,76,46,1

1716,916,816,215,614,81413,212,411,71110,39,79,18,57,97,46,96,46,15,75,354,74,34

67,5 m 72 m

141413,913,513,112,411,71110,49,89,28,78,17,77,26,76,35,95,55,24,94,64,343,73,43,1

26,8 m

51515045413835,532,530,528,825,622,720,919,317,816,4

38,1 m

363431,529,427,325,624,121,41917,315,814,413,112,211,410,79,99,3

49,4 m

2624,723,522,420,418,516,815,314,1131211,110,29,698,47,87,36,96,66,2

60,7 m

19,419,418,517,616,515,314,313,312,411,610,910,19,58,98,37,87,476,66,25,85,55,14,8

0100100100100

00

100100100

000

100100

0000

100

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

3

33,544,556789

10

1214161820222426283032343638404244

11

4648505254565860626466

33,544,556789

101112141618202224262830323436384042444648505254565860626466

17617315714413612311210293837463

m m

15,5 m – 72 m 360° 85 t

DINISO

LTM1250/1

00000

9292929292

100100100100100

0/ 0/ 046/ 0/ 0

0/ 0/

0/46/ 00/ 0/ 0

46

46/ 0/ 046 / 046/46/46

/46

/92

0/ 00/ 0/46

46/ 0/ 046 / 0

/ 0/46

0/460/ 0/460/ 0/46

46/46/ 092 /4646 /460

/46/46/46/46

0/ 0/46

46/ 0/ 04646/4646/4646

/92/46/46/46

/46/92

92/46/46464646/46/4646/46/92

/92/46/46/46

92/46/46924646/46/9246/46/92

/92/46/92/46

92/46/46929246/92/9246/46/92

/92/46/92/92

92/46929292/9246/92

/92/92

TAB 131004 / 131196

IIIIIIIVV

IIIIIIIVV% %

* nach hinten / over rear / en arrière

1761731571441361231119989807363

13513513412711510596898173665647,525,8

1171171161091009285797366554740,535,531

86868482797469655546,54034,530,527,225,621,1

717069686562585246,54135,53329,626,62421,819,8

555554545351464238,535,532,528,725,723,120,918,917,215,715

4342,540,538,53733,529,927,225,223,722,421,12018,918,117,416,41513,812,76,3

2624,723,522,420,418,516,815,314,1131211,110,29,698,47,87,36,96,66,2

33,533,532,531,529,226,624,322,12018,417,216151413,112,61211,611,110,610,29,8

26,226,226,224,823,321,619,918,41715,614,413,312,511,71110,39,89,28,88,37,97,67,46,6

19,419,418,517,616,515,314,313,312,411,610,910,19,58,98,37,87,476,66,25,85,55,14,8

20,720,720,619,918,917,716,515,414,413,412,511,710,910,29,698,58,17,77,476,76,46,1

1716,916,816,215,614,81413,212,411,71110,39,79,18,57,97,46,96,46,15,75,354,74,34

141413,913,513,112,411,71110,49,89,28,78,17,77,26,76,35,95,55,24,94,64,343,73,43,1

15,5 m*

20,7 m 25,9 m 31,1 m 36,3 m 41,5 m 46,7 m 51,9 m 57,1 m 62,3 m 67,5 m 72 m26,8 m 38,1 m 49,4 m 60,7 m

51515045413835,532,530,528,825,622,720,919,317,816,4

363431,529,427,325,624,121,41917,315,814,413,112,211,410,79,99,3

0000

100

000

100100

00

100100100

0100100100100

Die Traglasten amTeleskopausleger.Lifting capacities ontelescopic boom.Forces de levage à la flèche télescopique.

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

4

33,544,556789

10

1214161820222426283032343638404244

11

4648505254565860626466

33,544,556789

101112141618202224262830323436384042444648505254565860626466

17617315714413612311210089797263

m m

15,5 m – 72 m 360° 72,5 t

DINISO

LTM1250/1

00000

9292929292

100100100100100

0/ 0/ 046/ 0/ 0

0/ 0/ 0

0/46/ 00/ 0/46

46/ 0/ 046 / 046/46/46

/46

/92

0/ 00/ 0/46

46/ 0/ 046 / 0

/ 0/46

0/460/ 0/460/ 0/46

46/46/ 092 /4646 /460

/46/46/46/46

0/ 0/46

46/ 0/ 04646/4646/4646

/92/46/46/46

/46/92

92/46/46464646/46/4646/46/92

/92/46/46/46

92/46/46924646/46/9246/46/92

/92/46/92/46

92/46/46929246/92/9246/46/92

/92/46/92/92

92/46929292/9246/92

/92/92

TAB 131005 / 131197

IIIIIIIVV

IIIIIIIVV% %

* nach hinten / over rear / en arrière

1761731571441361231099786776963

1351351341271151059686777063524525,8

1171171161091009285776963524437,532,528,5

86868482797469625143,5373229,427,12421,1

717069686562585244,538,53530,526,623,52118,817

555554545351464238,53429,525,722,720,117,917,11614,613,4

4342,540,538,53733,529,927,225,223,722,421,12018,816,915,313,912,611,510,46,3

33,533,532,531,529,226,624,322,12018,417,216151413,112,61211,610,89,998,3

26,226,226,224,823,321,619,918,41715,614,413,312,511,71110,39,89,28,88,37,97,56,96,3

20,720,720,619,918,917,716,515,414,413,412,511,710,910,29,698,58,17,77,476,665,5

1716,916,816,215,614,81413,212,411,71110,39,79,18,57,97,46,96,46,15,75,34,84,23,83,4

141413,913,513,112,411,71110,49,89,28,78,17,77,26,76,35,95,55,24,94,64,33,83,32,92,6

Die Traglasten amTeleskopausleger.Lifting capacities ontelescopic boom.Forces de levage à la flèche télescopique.

Its maximum load moment is 840tm.

15,5 m*

20,7 m 25,9 m 31,1 m 36,3 m 41,5 m 46,7 m 51,9 m 57,1 m 62,3 m 67,5 m 72 m26,8 m 38,1 m 49,4 m 60,7 m

51515045413835,532,530,528,825,622,720,919,317,816,4

363431,529,427,325,624,121,41917,315,814,413,112,211,410,79,99,3

2624,723,522,420,418,516,815,314,1131211,110,29,698,47,87,36,96,66,2

19,419,418,517,616,515,314,313,312,411,610,910,19,58,98,37,87,476,66,25,85,55,14,8

0100100100100

00

100100100

000

100100

0000

100

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

5

Die Hubhöhen.Lifting heights.Hauteurs de levage.

Teleskopausleger.Telescopic boom.Flèche télescopique.

LTM1250/1

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

6

LTM1250/1

15,5 m – 72 m 12,2 m* 360° 85 t

Die Traglasten an der Klappspitze.Lifting capacities on the folding jib.Forces de levage à la fléchette pliante.

DINISO

3,544,556789

101112141618202224262830323436384042444648505254565860626466687072747678

3,544,556789

101112141618202224262830323436384042444648505254565860626466687072747678

16,516,21615,815,41514,514,113,212,311,49,98,77,66,65,95,3

12,2 m 12,2 m 12,2 m 12,2 m 12,2 m 12,2 m

15,5 m 51,9 m 57,1 m 62,3 m 67,5 m 72 m

0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°

46/ 092/4692/9246/9246/92

00000

92/46/ 092/92/9292/92/9246/92/9246/46/92

92/4692/9292/9292/9246/92

9292929292

100100100100100

TAB 131132.1/7 / 131142.1/7 / 131152.1/7

IIIIIIIVV

IIIIIIIVV%

m m

%* einteilige Klappspitze / one-parted folding jib / fléchette pliante à 1 élément

13,513,112,411,811,210,710,39,69,18,37,36,35,5

9,49,49,18,98,58,28,17,86,66,6

16,516,516,31615,715,314,914,514,113,412,611,911,110,59,89,38,88,37,87,46,96,66,365,75,43,9

13,312,712,111,611,210,810,510,19,89,69,39,18,98,78,37,87,476,66,365,75,5

9,49,298,88,78,58,48,38,28,18,187,97,87,47,16,76,465,7

14,414,414,414,21413,813,513,212,611,811,110,49,79,18,67,97,36,96,56,25,95,65,35,14,84,64,34,1

12,612,111,611,210,810,510,29,99,79,49,18,88,27,67,16,66,25,95,55,254,74,54,34

9,39,18,98,88,68,58,48,38,28,187,97,87,36,86,45,95,65,354,84,5

12121211,811,711,611,110,49,99,38,88,37,87,36,96,565,65,35,14,84,64,34,13,93,73,53,3

11,511,310,910,610,3109,79,498,587,57,16,66,25,85,45,14,94,64,44,243,73,53,3

8,98,88,68,58,48,38,28,187,97,77,36,86,465,65,24,94,64,44,23,93,73,5

9,69,69,69,69,69,59,28,88,58,27,97,57,16,76,465,65,354,74,44,13,83,53,332,82,62,42,22

9,69,69,39,18,88,48,17,77,47,16,86,56,25,95,55,24,94,54,243,73,43,232,72,52,32,1

8,38,28,187,97,77,47,16,86,66,36,15,75,354,74,44,13,83,53,22,92,72,4

8,18,18,18,18,17,97,77,47,16,86,56,35,95,65,34,94,64,34,13,83,53,33,12,92,72,62,42,221,81,61,4

8,18,18,187,77,47,16,96,76,46,15,85,55,14,84,54,243,73,53,232,82,62,42,221,81,61,4

7,97,87,57,376,76,56,265,75,454,74,44,13,93,63,43,12,92,72,52,221,8

Couple de charge maxi.: 840tm.

Fortsetzung

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

7

LTM1250/1

15,5 m – 72 m 22 m* 360° 85 t

DINISO

44,556789

101112141618202224262830323436384042444648505254565860626466687072747678808284

44,556789

101112141618202224262830323436384042444648505254565860626466687072747678808284

7777776,96,76,66,56,25,95,65,35,14,94,84,64,343,6

22 m 22 m 22 m 22 m 22 m 22 m

15,5 m 51,9 m 57,1 m 62,3 m 67,5 m 72 m

0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°

46/ 092/4692/9246/9246/92

00000

92/46/ 092/92/9292/92/9246/92/9246/46/92

92/4692/9292/9292/9246/92

9292929292

100100100100100

TAB 131132.3/7 / 131142.3/7 / 131152.3/7

IIIIIIIVV

IIIIIIIVV%

m m

%* zweiteilige Klappspitze / bi-parted folding jib / fléchette pliante à 2 éléments

665,75,45,24,94,74,54,44,34,143,8

4,74,54,34,143,93,83,8

777776,96,86,66,56,46,26,15,95,85,65,55,35,25,154,94,84,84,74,64,44,34,13,93,8

65,95,75,65,45,35,254,94,84,74,74,64,54,44,44,34,24,24,14443,93,8

4,74,64,54,44,34,24,14,1443,93,93,93,83,83,83,83,83,83,83,8

6,66,66,66,66,56,46,36,26,165,95,85,65,55,45,35,25,154,94,84,74,44,243,83,63,43,33,12,92,8

5,85,65,55,35,25,154,94,84,74,64,54,54,44,44,44,34,24,143,93,73,53,33,12,9

4,64,64,54,44,34,24,24,14,1443,93,93,93,93,83,83,83,83,73,53,33,1

5,95,95,95,95,95,85,85,75,65,55,55,45,35,25,154,94,84,74,64,343,83,63,43,232,92,82,62,52,42,3

5,35,25,154,94,84,74,64,64,54,44,44,34,34,34,24,143,83,53,33,232,82,72,62,42,3

4,44,44,34,24,24,14,143,93,93,93,83,83,83,83,83,83,63,53,33,12,92,72,5

5,45,45,45,35,35,25,25,15,1554,94,94,84,74,64,64,44,243,73,53,33,12,92,72,52,42,22,11,91,81,61,41,3

4,94,84,74,74,64,54,44,44,34,24,24,24,14,143,93,83,63,43,22,92,72,52,32,221,81,71,51,3

4,24,24,1443,93,93,83,83,73,73,73,73,73,73,73,53,33,12,82,62,42,221,81,6

4,84,84,84,84,84,74,74,64,64,64,54,54,54,44,343,83,63,43,232,82,62,52,32,221,81,71,51,31,21

4,54,54,44,44,34,34,24,24,14,1443,93,73,53,33,12,92,72,52,42,221,91,71,51,31,21

443,93,83,83,73,73,73,63,63,63,53,53,53,43,22,92,72,52,32,221,81,61,41,1

Die Traglasten an der Klappspitze.Lifting capacities on the folding jib.Forces de levage à la fléchette pliante.

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

8

LTM1250/1Die Hubhöhen.Lifting heights.Hauteurs de levage.

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

9

LTM1250/1

15,5 m – 72 m 19,2 m* 360° 85 t

DINISO

44,556789

1011121416182022242628303234363840424446485052545658606264666870727476788082

44,556789

1011121416182022242628303234363840424446485052545658606264666870727476788082

10,510,510,410,2109,89,69,398,78,27,77,16,66,25,75,14,74,23,8

19,2 m 19,2 m 19,2 m 19,2 m 19,2 m 19,2 m

15,5 m 51,9 m 57,1 m 62,3 m 67,5 m 72 m

0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°

46/ 092/4692/9246/9246/92

00000

92/46/ 092/92/9292/92/9246/92/9246/46/92

92/4692/9292/9292/9246/92

9292929292

100100100100100

TAB 131132.2/7 / 131142.2/7 / 131152.2/7

IIIIIIIVV

IIIIIIIVV%

m m

%* zweiteilige Klappspitze / bi-parted folding jib / fléchette pliante à 2 éléments

8,88,58,27,676,565,75,35,14,94,5

5,85,45,24,94,84,74,64,6

10,510,510,310,1109,89,59,28,98,78,48,27,97,67,37,16,86,66,46,15,95,75,45,24,94,74,54,24

8,78,48,17,87,57,276,76,56,36,15,95,85,65,45,35,25,154,94,84,74,54,24

5,85,75,55,45,35,25,154,94,84,84,74,74,74,64,64,64,64,64,5

9,59,59,39,298,88,78,48,287,87,67,47,276,76,56,25,85,454,74,44,243,83,63,43,23,1

87,87,67,37,16,86,66,46,265,95,75,65,55,35,25,14,94,64,34,13,93,73,53,33,1

5,85,75,55,45,35,25,154,94,94,84,84,74,74,74,64,64,44,243,73,53,3

887,97,87,77,67,57,47,37,176,86,76,56,35,95,65,34,94,64,343,83,73,53,33,232,82,72,52,4

7,27,16,96,76,56,36,165,85,75,55,45,35,25,14,94,64,343,73,53,33,132,82,72,52,4

5,55,45,35,25,154,94,84,84,74,74,64,64,64,54,54,23,93,63,43,23,12,92,7

6,86,86,86,76,76,66,66,56,46,36,26,15,95,75,45,14,84,54,343,83,63,33,12,92,62,42,32,121,81,61,5

6,36,26,165,85,75,65,55,35,25,154,94,74,54,34,13,83,63,33,12,92,62,42,221,91,71,5

5,25,154,94,84,74,74,64,64,54,54,44,44,34,343,73,53,232,72,52,32,11,9

5,95,95,95,95,85,85,75,75,65,55,35,14,84,64,44,13,93,73,53,332,82,72,52,32,121,81,61,41,31,11

5,75,65,55,45,35,25,154,94,84,64,44,243,73,53,33,12,92,72,52,32,121,81,61,41,21

4,84,84,74,74,64,54,54,44,44,34,34,243,83,53,332,82,62,42,221,81,61,41,2

Die Traglasten an der Klappspitze.Lifting capacities on the folding jib.Forces de levage à la fléchette pliante.

Fortsetzung

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

10

LTM1250/1

15,5 m – 72 m 29 m* 360° 85 t

Die Traglasten an der Klappspitze.Lifting capacities on the folding jib.Forces de levage à la fléchette pliante.

DINISO

56789

10111214161820222426283032343638404244464850525456586062646668707274767880828486

56789

10111214161820222426283032343638404244464850525456586062646668707274767880828486

5,35,35,35,35,35,35,254,74,44,23,93,73,53,43,232,92,82,72,62,5

29 m 29 m 29 m 29 m 29 m 29 m

15,5 m 51,9 m 57,1 m 62,3 m 67,5 m 72 m

0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°

46/ 092/4692/9246/9246/92

00000

92/46/ 092/92/9292/92/9246/92/9246/46/92

92/4692/9292/9292/9246/92

9292929292

100100100100100

TAB 131132.5/7 / 131142.5/7 / 131152.5/7

IIIIIIIVV

IIIIIIIVV%

m m

%* dreiteilige Klappspitze / three-parted folding jib / fléchette pliante à 3 éléments

4,13,83,63,43,232,92,72,62,52,42,42,4

2,92,82,72,52,42,42,32,32,32

5,35,35,35,35,25,14,94,74,54,44,24,143,83,73,63,53,43,33,33,23,132,92,82,82,72,72,62,62,52,5

4,13,93,83,73,53,43,33,23,132,92,92,82,82,72,72,62,52,52,52,42,42,42,32,32,3

2,92,92,82,72,62,62,52,52,42,42,42,42,32,32,32,32,32,32,32,32,32,3

4,84,84,84,84,84,74,64,44,34,243,93,83,73,63,53,43,33,23,1332,92,92,82,72,72,62,52,42,32,22,1

3,83,73,63,53,43,33,23,132,92,82,82,72,72,72,62,62,52,52,52,42,42,42,42,32,32,22,1

2,82,82,72,62,62,52,52,52,42,42,32,32,32,32,22,22,22,22,22,22,22,22,2

4,24,24,24,24,24,24,143,93,83,73,63,53,43,33,23,13,132,92,92,82,82,82,72,52,42,32,22,121,91,81,71,6

3,53,53,43,33,23,1332,92,82,72,72,72,62,62,62,52,52,52,52,42,42,42,32,22,121,91,81,7

2,62,62,62,52,52,52,42,42,42,32,32,32,32,22,22,22,22,22,22,22,22,22,11,91,7

3,73,73,73,73,73,73,73,63,53,43,33,23,23,1332,92,92,82,82,72,72,62,52,32,221,91,71,51,41,21,1

3,23,23,1332,92,82,82,72,62,62,62,52,52,52,52,42,42,42,42,42,42,32,121,81,61,41,31,1

2,42,42,42,42,42,42,32,32,32,32,22,22,22,22,22,22,22,22,22,22,11,91,71,51,21

3,23,23,23,23,23,23,23,23,23,1332,92,92,82,82,72,72,62,52,32,221,91,71,61,41,31,21

2,92,92,92,82,72,72,62,62,52,52,52,42,42,42,42,32,32,32,32,22,11,91,81,61,41,31,1

2,32,32,32,32,32,32,32,22,22,22,22,22,22,22,22,22,22,121,81,61,41,21

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

11

Die Hubhöhen.Lifting heights.Hauteurs de levage.

Klappspitze.Folding jib.Fléchette pliante.

LTM1250/1

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

12

LTM1250/1

15,5 m – 72 m 26,2 m* 360° 85 t

Die Traglasten an der Klappspitze.Lifting capacities on the folding jib.Forces de levage à la fléchette pliante.

DINISO

4,556789

101112141618202224262830323436384042444648505254565860626466687072747678808284

4,556789

101112141618202224262830323436384042444648505254565860626466687072747678808284

6,86,86,86,86,86,86,76,56,25,85,454,64,34,13,83,63,43,33,132,8

26,2 m 26,2 m 26,2 m 26,2 m 26,2 m 26,2 m

15,5 m 51,9 m 57,1 m 62,3 m 67,5 m 72 m

0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°

46/ 092/4692/9246/9246/92

00000

92/46/ 092/92/9292/92/9246/92/9246/46/92

92/4692/9292/9292/9246/92

9292929292

100100100100100

TAB 131132.4/7 / 131142.4/7 / 131152.4/7

IIIIIIIVV

IIIIIIIVV%

m m

%* dreiteilige Klappspitze / three-parted folding jib / fléchette pliante à 3 éléments

6,86,86,86,86,86,66,36,15,85,65,45,254,84,64,44,34,143,93,83,73,63,53,43,33,23,132,92,9

6,26,26,26,26,165,85,65,45,254,94,74,54,44,24,143,93,83,73,63,53,43,33,232,92,72,62,52,42,2

5,45,45,45,45,35,35,254,94,74,64,44,34,24,13,93,83,73,73,63,53,43,232,92,72,62,42,32,22,121,91,8

4,54,54,54,54,54,54,54,44,34,24,143,93,83,73,63,63,53,43,33,232,82,72,52,32,221,81,61,51,31,21

44444443,93,93,93,83,73,63,53,53,43,33,23,12,92,72,52,32,221,91,71,61,41,31,1

5,14,84,44,13,93,63,43,23,12,92,82,72,7

5,14,94,74,54,44,24,13,93,83,73,63,53,43,33,23,13,132,92,92,82,82,72,72,72,7

4,74,64,44,34,143,93,83,73,63,53,43,33,33,23,1332,92,92,82,82,72,72,62,52,42,2

4,34,24,13,93,83,73,63,53,43,33,33,23,23,13,1332,92,92,82,82,62,52,42,32,22,11,91,8

3,83,83,73,63,53,43,43,33,23,23,13,1332,92,92,92,82,82,72,52,42,221,91,71,51,31,1

3,53,53,43,33,23,23,13,132,92,92,92,92,82,82,82,72,52,32,221,81,71,51,31,21

3,43,33,12,92,82,72,62,62,6

3,43,43,33,23,132,92,92,82,82,72,72,72,72,62,62,62,62,62,62,62,6

3,33,33,23,1332,92,82,82,82,72,72,72,62,62,62,62,62,62,62,62,62,5

3,23,13,132,92,92,82,82,72,72,72,72,72,62,62,62,62,62,62,62,52,32,22,1

332,92,92,82,82,82,72,72,72,62,62,62,62,62,62,62,62,52,32,11,91,71,51,31,1

2,82,82,82,72,72,62,62,62,52,52,52,52,52,52,52,52,42,221,81,61,41,21

Fortsetzung

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

13

LTM1250/1

15,5 m – 72 m 36 m* 360° 85 t

DINISO

6789

10111214161820222426283032343638404244464850525456586062646668707274767880828486889092

6789

10111214161820222426283032343638404244464850525456586062646668707274767880828486889092

3,63,63,63,63,63,63,63,43,232,82,62,52,32,22,121,91,91,81,71,71,61,51,5

36 m 36 m 36 m 36 m 36 m 36 m

15,5 m 51,9 m 57,1 m 62,3 m 67,5 m 72 m

0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°

46/ 092/4692/9246/9246/92

00000

92/46/ 092/92/9292/92/9246/92/9246/46/92

92/4692/9292/9292/9246/92

9292929292

100100100100100

TAB 131132.6/7 / 131142.6/7 / 131152.6/7

IIIIIIIVV

IIIIIIIVV%

m m

%* vierteilige Klappspitze / four-parted folding jib / fléchette pliante à 4 éléments

3,53,53,53,53,53,43,33,23,12,92,82,72,62,52,52,42,32,22,12,1221,91,91,81,81,81,71,71,71,61,61,61,5

3,23,23,23,23,23,23,12,92,82,72,62,52,52,42,32,32,22,12,1221,91,91,91,81,81,81,71,71,71,61,61,51,51,51,5

2,82,82,82,82,82,82,72,72,62,52,42,32,32,22,22,12,1221,91,91,81,81,81,71,71,71,71,61,61,61,51,41,31,21,11

2,42,42,42,42,42,42,42,32,32,22,22,12,1221,91,91,91,81,81,81,71,71,71,71,61,61,51,31,21

222222222221,91,91,91,81,81,81,71,71,71,71,61,61,41,31,21

2,52,52,42,32,121,91,81,81,71,61,61,51,51,41,4

2,52,52,42,32,22,12,121,91,91,81,81,81,71,71,71,61,61,61,61,51,51,51,51,41,41,41,4

2,32,32,32,22,12,121,91,91,81,81,81,71,71,71,61,61,61,61,61,51,51,51,51,41,41,41,41,4

2,12,12,1221,91,91,81,81,71,71,71,61,61,61,61,61,61,51,51,51,51,41,41,41,41,41,31,31,21,1

1,91,91,91,91,91,81,81,71,71,71,61,61,61,61,51,51,51,51,51,51,51,41,41,41,41,31,21

1,71,71,71,71,71,71,61,61,61,61,51,51,51,51,51,41,41,41,41,41,31,31,21,1

1,81,71,71,61,51,51,41,41,41,4

1,71,71,71,61,61,61,51,51,51,51,51,51,41,41,41,41,41,41,41,41,41,4

1,61,61,61,61,51,51,51,51,51,51,41,41,41,41,41,41,41,41,41,41,41,41,4

1,51,51,51,51,51,51,41,41,41,41,41,41,41,41,41,41,41,41,41,41,41,41,31,3

1,41,41,41,41,41,41,41,41,41,41,41,41,41,41,41,41,41,41,41,41,31,31,1

1,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,21,1

Die Traglasten an der Klappspitze.Lifting capacities on the folding jib.Forces de levage à la fléchette pliante.

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

14

Die Hubhöhen.Lifting heights.Hauteurs de levage.

Klappspitze.Folding jib.Fléchette pliante.

LTM1250/1

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

15

LTM1250/1

15,5 m – 51,9 m0°14 m – 42 m 360° 85 t

DINISO

Die Traglasten an der festen Gitterspitze.Lifting capacities on the lattice fly jib.Forces de levage à la fléchette treillis fixe.

33,54

56789

10111214161820222426283032343638404244

4,5

4648505254565860626466687072747678808284

33,544,556789

101112141618202224262830323436384042444648505254565860626466687072747678808284

17,917,917,917,917,717,316,816,115,214,213,212,310,697,76,55,54,63,93,1

14 m 14 m

15,5 m + 1,5 m*

m m

51,9 m + 1,5 m*

21 m 21 m28 m 28 m35 m 35 m42 m 42 m

* Adapter / adapter / pièce d’adaptateur

00000

TAB 131502.1/2

IIIIIIIVV

IIIIIIIVV% %

92/4692/9246/9246/4646/46

13,613,613,413,212,812,311,811,41110,79,99,28,37,46,45,54,74,13,632,5

9,79,498,68,387,46,96,465,75,354,64,23,63,22,82,421,6

6,46,25,75,34,94,64,343,73,53,33,12,82,62,52,321,71,41,1

4,74,44,13,83,53,332,82,62,42,32,22,11,91,81,71,61,51,41,1111

17,917,917,917,517,116,615,915,114,113,312,411,610,810,19,48,78,17,576,45,95,55,14,84,44,13,73,4

13,413,112,612,111,711,310,910,510,19,89,498,58,17,67,16,66,25,75,34,94,64,23,93,73,43,12,92,6

9,79,38,98,58,27,87,57,276,76,46,265,85,65,45,35,14,94,74,54,23,83,63,33,12,92,72,52,32,11,9

6,96,76,46,15,95,65,45,14,94,74,54,34,243,83,73,63,43,33,23,12,92,82,72,62,52,52,32,121,81,61,51,3

5,254,84,64,44,243,83,63,53,33,232,92,72,62,52,42,42,32,22,12,121,91,81,71,71,61,61,51,51,31,21

Fortsetzung

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

16

LTM1250/1

57,1 m – 72 m0°14 m – 35 m 360° 85 t

DINISO

11121416182022242628303234363840424446485052545658606264666870727476788082

11121416182022242628303234363840424446485052545658606264666870727476788082

14,514,514,414,313,913,412,912,211,510,810,19,58,98,47,87,36,86,35,85,454,74,44,13,83,53,232,7

14 m 21 m

57,1 m + 1,5 m*

m m

67,5 m + 1,5 m*

21 m 21 m28 m 28 m 35 m35 m 28 m14 m 35 m35 m

92/4692/9292/9246/9246/46

TAB 131502.3/4/5

IIIIIIIVV

IIIIIIIVV% %

9292929292

100100100100100

62,3 m + 1,5 m*

14 m

92/46929292

46 92

92/92/92/

/

42 m

72 m +1,5 m*

10,810,810,510,310,2109,89,48,98,487,57,16,76,35,95,55,24,84,44,13,83,63,43,22,92,72,52,32,11,9

8,58,487,77,57,276,86,56,36,15,95,75,65,45,35,14,84,54,23,93,63,43,12,82,62,52,42,221,91,71,51,3

6,36,15,95,65,45,254,84,64,44,34,143,83,73,63,43,33,33,23,132,92,72,42,221,91,81,71,51,31,21

4,54,34,243,93,73,63,43,33,132,92,82,72,52,42,42,32,22,12,1221,91,81,81,61,51,31,21,11

11,611,511,411,110,710,39,99,48,98,47,97,476,66,15,75,454,64,343,83,63,43,232,72,52,32,1

8,68,68,68,58,58,387,87,57,16,86,56,25,95,65,34,94,64,343,73,43,22,92,82,62,52,32,221,91,71,5

6,96,96,86,66,46,36,165,85,65,55,35,14,94,64,44,23,93,73,53,232,82,62,32,22,11,91,81,71,61,41,21,1

5,35,14,94,84,64,54,34,24,13,93,83,73,63,53,43,33,23,132,82,62,42,221,91,71,61,41,31,21,11

8,78,78,78,68,58,287,87,57,16,86,56,25,95,75,354,74,44,13,83,53,22,92,72,52,32,11,91,71,51,3

6,86,86,86,86,66,56,36,15,95,65,45,254,84,64,44,23,93,73,43,232,82,52,32,11,91,71,51,41,21

5,35,35,35,35,25,14,94,84,64,44,24,13,93,83,63,53,43,23,12,92,72,52,32,11,91,81,61,41,21

2,72,72,72,72,72,72,72,72,62,52,32,22,11,91,81,61,51,3

3,73,73,73,73,73,73,73,63,53,43,23,132,92,72,62,52,42,32,22,11,91,71,61,41,31,11

* Adapter / adapter / pièce d’adaptateur

Die Traglasten an der festen Gitterspitze.Lifting capacities on the lattice fly jib.Forces de levage à la fléchette treillis fixe.

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

17

LTM1250/1

15,5 m – 51,9 m20°14 m – 42 m 360° 85 t

DINISO

89

10111214161820222426283032343638404244464850525456586062646668707274767880828486

89

10111214161820222426283032343638404244464850525456586062646668707274767880828486

16,115,314,513,813,112119,47,96,55,44,33,4

14 m 14 m

15,5 m + 1,5 m*

m m

51,9 m + 1,5 m*

21 m 21 m28 m 28 m35 m 35 m42 m 42 m

* Adapter / adapter / pièce d’adaptateur

00000

TAB 131522.1/2

IIIIIIIVV

IIIIIIIVV% %

92/4692/9246/9246/4646/46

109,698,587,67,36,96,25,34,43,62,8

6,25,85,45,14,84,64,44,243,93,632,41,9

4,13,83,53,33,12,92,72,62,52,42,32,32,21,91,5

2,92,72,52,32,221,91,81,71,61,61,51,41,41,41,31

15,414,71413,412,912,411,911,511,110,39,798,47,87,26,76,25,75,34,94,54,1

9,49,18,88,68,38,17,97,77,67,47,27,16,96,66,25,85,34,94,64,23,93,63,3

65,85,65,55,35,154,94,74,64,54,44,34,24,143,93,93,83,63,43,12,82,62,3

43,93,73,63,43,33,23,132,92,82,72,62,62,52,52,42,32,32,32,32,32,22,221,8

2,62,52,42,32,22,12,121,91,91,81,71,71,61,61,61,51,51,41,41,41,41,41,41,41,31,21

Die Traglasten an der festen Gitterspitze.Lifting capacities on the lattice fly jib.Forces de levage à la fléchette treillis fixe.

Fortsetzung

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

18

LTM1250/1

57,1 m – 72 m20°14 m – 35 m 360° 85 t

DINISO

18202224262830323436384042444648505254565860626466687072747678808284

18202224262830323436384042444648505254565860626466687072747678808284

13,713,112,712,111,61110,59,99,38,78,17,67,16,66,15,65,24,84,64,23,93,63,2

14 m 21 m

57,1 m + 1,5 m*

m m

67,5 m + 1,5 m*

21 m 21 m28 m 28 m35 m 28 m14 m 35 m35 m

92/4692/9292/9246/9246/46

TAB 131522.3/4/5

IIIIIIIVV

IIIIIIIVV% %

100100100100100

62,3 m + 1,5 m*

14 m

9292929292

Die Traglasten an der festen Gitterspitze.Lifting capacities on the lattice fly jib.Forces de levage à la fléchette treillis fixe.

Der LTM 1250/1 hat für jeden Einsatzdie passende Ausrüstung.

* Adapter / adapter / pièce d’adaptateur

42 m 35 m

72 m +1,5 m*

92/4692/9292/9292/9246/92

8,68,48,287,87,67,57,47,276,76,35,95,55,14,84,44,13,83,53,232,82,52,3

5,65,45,35,154,84,74,64,54,44,34,24,24,1443,73,53,22,92,72,52,32,221,8

3,73,63,43,33,23,132,92,92,82,72,62,52,52,42,42,42,32,32,22,221,81,71,61,41,21

2,42,32,32,22,1221,91,81,81,71,71,61,61,61,51,51,51,41,41,41,41,31,21,1

10,610,29,99,59,18,78,37,97,57,26,96,56,15,75,34,94,54,23,93,73,43,232,7

7,87,67,47,26,96,76,46,15,95,65,45,14,94,74,443,73,53,232,82,62,42,32,11,9

5,154,84,74,64,54,44,34,34,24,143,93,73,53,43,12,92,62,42,32,11,91,81,71,61,4

3,33,23,13,132,92,82,82,72,62,62,52,42,42,42,32,32,32,11,91,71,51,41,31,11

8,48,17,87,57,276,76,46,25,95,65,45,14,94,64,343,73,43,22,92,72,52,221,8

6,36,15,95,75,55,25,14,94,74,54,44,243,83,63,53,332,82,52,42,221,71,51,31,1

4,64,54,44,34,143,83,73,53,43,33,232,92,82,72,62,52,32,11,91,71,51,31,1

2,72,62,62,52,52,42,42,32,22,1221,91,81,71,61,41,21,1

32,92,82,82,72,62,62,52,52,52,42,32,22,22,121,91,81,71,51,41,21,1

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

19

LTM1250/1

15,5 m – 51,9 m40°14 m – 42 m 360° 85 t

DINISO

1214161820222426283032343638404244464850525456586062646668707274

1214161820222426283032343638404244464850525456586062646668707274

12,511,710,810,19,27,665,4

14 m 14 m

15,5 m + 1,5 m*

m m

51,9 m + 1,5 m*

21 m 21 m28 m 28 m35 m 35 m

* Adapter / adapter / pièce d’adaptateur

00000

TAB 131542.1/2

IIIIIIIVV

IIIIIIIVV% %

9292464646

42 m 42 m

7,376,86,66,46,25,24

4,54,34,13,93,83,73,63,63,53,5

2,72,52,42,32,22,22,12,12,12,1

1,71,61,51,41,41,31,31,31,31,31,3

12,211,911,511,210,810,510,3109,89,38,687,56,9

7,27,176,96,86,76,66,56,56,46,36,265,65,2

4,44,34,24,143,93,83,83,73,73,73,63,63,63,63,6

2,62,52,52,42,42,32,32,22,22,22,22,12,12,12,12,12,1

1,41,41,31,31,31,31,31,31,31,3

Die Traglasten an der festen Gitterspitze.Lifting capacities on the lattice fly jib.Forces de levage à la fléchette treillis fixe.

Fortsetzung

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

20

LTM1250/1

57,1 m – 67,5 m40°14 m – 35 m 360° 85 t

DINISO

2224262830323436384042444648505254565860626466687072747678

2224262830323436384042444648505254565860626466687072747678

11,511,210,910,610,39,99,498,47,87,36,86,35,95,4

14 m 21 m

57,1 m + 1,5 m*

m m

67,5 m + 1,5 m*

21 m 21 m28 m 28 m35 m 28 m 35 m14 m 35 m

9292924646

TAB 131542.3/4/5

IIIIIIIVV

IIIIIIIVV% %

9292929292

62,3 m + 1,5 m*

14 m

9292929246

Die Traglasten an der festen Gitterspitze.Lifting capacities on the lattice fly jib.Forces de levage à la fléchette treillis fixe.

42 m

6,96,86,76,76,66,56,56,46,46,25,85,45,14,74,3

4,24,143,93,93,83,83,73,73,63,63,63,63,63,63,53,2

2,52,42,42,32,32,32,22,22,22,22,12,12,12,12,12,12,1

1,41,31,31,31,31,31,31,31,31,31,31,3

9,79,498,68,27,87,57,26,96,66,35,95,55,14,74,3

6,66,56,46,36,15,95,65,45,254,74,54,343,73,4

43,93,93,83,83,73,73,63,63,63,63,53,43,33,22,92,72,5

2,42,32,32,32,22,22,22,12,12,12,12,12,12,12,12,121,8

7,77,57,26,96,76,56,25,95,75,45,254,84,54,23,8

5,65,45,254,94,74,54,44,34,13,93,73,63,43,232,7

3,83,73,73,63,63,53,33,23,132,92,82,72,62,42,32,2

2,22,22,22,12,12,12,12,12,12,12,1221,91,81,71,51,3

* Adapter / adapter / pièce d’adaptateur

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

21

LTM1250/1Die Hubhöhen.Lifting heights.Hauteurs de levage.

Feste Gitterspitze.Lattice fly jib.Fléchette treillis fixe.

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

22

LTM1250/1

789

1011121416182022242628303234363840424446485052545658606264666870

789

1011121416182022242628303234363840424446485052545658606264666870

504947,546,54645,543,53727,2

21 m 28 m 35 m 35 m42 m 42 m49 m 49 m56 m 56 m 63 m63 m 17,5 m17,5 m 21 m 28 m

15,5 m + 3 m* 25,9 m + 3 m*

* Adapter / adapter / pièce d’adaptateur

m m

17,5 m – 70 m82°15,5 m – 25,9 m 360° 72,5 t

DINISO

00000

4646000

TAB 131313.1/2

IIIIIIIVV

IIIIIIIVV% %

70 m70 m

4847464544434236,529,3

35,535343332,531,529,725,220,615,6

27,126,425,725,224,724,42422,319,416,613,5

2120,720,319,919,519,21918,417,616,815,413,511,48,5

16,416,21615,815,515,315,114,914,714,614,313,812,410,99,57,9

12,812,612,512,312,11211,911,811,511,31110,710,410,39,98,97,96,84,9

10,1109,89,79,69,49,298,78,58,287,77,57,37,16,96,76,65,84,7

7,57,16,76,46,15,85,55,254,74,44,23,93,73,53,33,12,92,82,62,42,32,22,2

39,539,539,539,539,539,536,5

35,535,535,53535353530,5

27,627,327,126,926,926,926,725,822,415,5

21,120,920,720,620,620,620,620,520,118,115,3

16,616,516,416,216,116,116,116,115,915,615,114,112,49

13,11312,812,712,612,612,512,512,512,412,412,412,411,710,38,6

10,310,210,1109,99,89,89,79,69,49,298,88,78,68,58,47,8

8,28,187,97,97,87,77,77,67,57,47,276,96,76,66,56,36,26,15,2

6,46,25,95,65,45,24,94,74,54,243,83,63,43,23,12,92,72,62,52,32,22,1

Die Traglasten an der wippbaren Gitterspitze.Lifting capacities on the luffing lattice jib.Forces de levage à la fléchette treillis relevable.

The LTM 1250/1 can be equippedto tackle any job.

Fortsetzung

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

23

LTM1250/1

1112141618202224262830323436384042444648505254565860626466

1112141618202224262830323436384042444648505254565860626466

26,726,726,726,726,726,7

17,5 m 21 m 28 m 35 m 42 m 49 m 56 m 63 m 17,5 m 21 m 28 m 35 m 42 m 49 m 56 m

36,3 m + 3 m* 46,7 m + 3 m*

m m

17,5 m – 70 m82°36,3 m – 46,7 m 360° 72,5 t

DINISO

* Adapter / adapter / pièce d’adaptateur

92464600

9246464646

TAB 131313.3

IIIIIIIVV

IIIIIIIVV% %

23,723,623,623,523,523,523,5

18,418,318,318,218,218,218,218,218,2

14,714,614,514,514,414,414,414,414,414,414,4

11,811,711,611,511,511,511,511,511,511,511,511,511,5

9,39,39,29,29,19,19,19,19,19,19,19,19,19,19,19,1

7,47,47,37,37,27,27,27,27,27,27,27,27,27,27,27,27,27,2

5,85,85,75,75,75,75,65,65,65,65,65,65,65,65,65,65,65,65,55,55,3

16,616,516,516,516,5

14,714,614,514,514,514,514,5

11,511,411,311,311,311,311,311,311,3

8,98,88,88,78,78,78,78,78,78,78,7

7,17776,96,96,96,96,96,96,96,96,9

5,45,45,45,35,35,35,35,35,35,35,35,35,35,35,3

3,93,93,93,93,93,93,93,93,93,93,93,93,93,93,93,93,93,9

Fortsetzung

Die Traglasten an der wippbaren Gitterspitze.Lifting capacities on the luffing lattice jib.Forces de levage à la fléchette treillis relevable.

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

24

LTM1250/1

1618202224262830323436384042444648

1618202224262830323436384042444648

9,99,99,89,89,8

17,5 m 17,5 m 17,5 m21 m 21 m 21 m28 m 28 m 28 m35 m 35 m42 m

57,1 m + 3 m* 62,3 m + 3 m*

m m

17,5 m – 70 m82°57,1 m – 67,5 m 360° 72,5 t

DINISO

* Adapter / adapter / pièce d’adaptateur

9292924646

9292929292

TAB 131313.4

IIIIIIIVV

IIIIIIIVV% %

67,5 m + 3 m*

9292929246

8,88,78,78,68,68,6

6,76,66,66,66,66,66,66,6

5,15554,94,94,94,94,94,9

3,53,53,53,53,53,53,53,53,53,53,53,53,5

7,57,47,37,37,3

6,46,46,46,36,36,3

4,84,74,74,74,74,64,64,6

3,13,13,13,13,13,13,13,13,13,13,1

5,45,35,35,3

4,64,54,54,54,5

2,82,82,82,82,82,82,8

Die Traglasten an der wippbaren Gitterspitze.Lifting capacities on the luffing lattice jib.Forces de levage à la fléchette treillis relevable.

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

25

LTM1250/1Die Hubhöhen.Lifting heights.Hauteurs de levage.

Wippbare Gitterspitze.Luffing lattice jib.Fléchette treillis relevable.

Teleskopausleger / Telescopic boom / Flèche télescopique: 82°

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

26

LTM1250/1

1214161820222426283032343638404244464850525456586062646668707274

1214161820222426283032343638404244464850525456586062646668707274

46,54542,537,532

17,5 m17,5 m 21 m21 m 28 m28 m 35 m35 m 42 m42 m 49 m49 m 56 m56 m 63 m63 m 70 m70 m

15,5 m + 3 m* 25,9 m + 3 m*

m m

17,5 m – 70 m75°15,5 m – 25,9 m 360° 72,5 t

DINISO

Die Traglasten an der wippbaren Gitterspitze.Lifting capacities on the luffing lattice jib.Forces de levage à la fléchette treillis relevable.

* Adapter / adapter / pièce d’adaptateur

00000

TAB 131343.1/2

IIIIIIIVV

IIIIIIIVV% %

4646000

42403836,532,5

32,531,530,529,929,527,32317,8

24,824,123,523,122,822,62118,315,3

19,819,318,818,418,117,917,616,916,114,912,910,7

15,415,114,814,514,314,214,1141413,512,210,79,3

12,111,911,811,511,311,211,11110,710,510,310,19,88,97,86,4

9,49,39,18,98,68,48,27,97,77,57,37,16,96,76,66,45,8

6,15,85,55,24,94,74,44,23,93,73,53,33,12,92,72,52,42,32,22,1

3837,535,533,5

34,53433,532,530,529,4

26,325,925,625,525,324,722,4

20,320,220,119,919,819,819,819,818,415,4

15,915,815,715,615,615,615,515,314,814,413,1

12,512,412,312,212,212,112,112,112,112,112,112,110,99,1

9,79,69,59,59,49,39,29,18,98,88,68,58,48,48,2

7,77,77,67,67,57,57,47,37,176,86,76,56,46,36,26,15,6

5,35,14,84,64,44,243,83,63,43,232,82,72,52,42,32,22,1

La LTM 1250/1possède l'équipementqui convient à chaque problème.

Fortsetzung

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

27

LTM1250/1

182022242628303234363840424446485052545658606264666870

182022242628303234363840424446485052545658606264666870

25,925,924,623,3

17,5 m 17,5 m 21 m21 m 28 m28 m 35 m35 m 42 m42 m

36,3 m + 3 m*

m m

17,5 m – 63 m75°36,3 m – 67,5 m 360° 72,5 t

DINISO

* Adapter / adapter / pièce d’adaptateur

92464600

9246464646

TAB 131343.3

IIIIIIIVV

IIIIIIIVV% %

46,7 m + 3 m*

56 m56 m 49 m49 m 63 m

23,12322,421,320,3

17,917,917,817,717,116,516,2

14,214,214,114,114,114,113,913,513,3

11,311,311,211,211,211,211,211,211,211,110,9

998,98,98,88,88,88,88,88,88,88,88,8

7,17,17,177777777777

5,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,4

16,216,115,715,2

14,214,214,113,713,4

1111111110,810,6

8,58,58,58,48,48,48,48,4

6,76,76,76,76,76,76,76,76,76,7

4,94,94,94,94,94,94,94,94,94,94,94,9

3,33,33,33,33,33,33,33,33,33,33,33,33,33,3

2830323436384042444648505254

2830323436384042444648505254

9,49,1

17,5 m 17,5 m 17,5 m21 m 21 m 21 m28 m 28 m 28 m35 m 35 m42 m

57,1 m + 3 m*

m m

* Adapter / adapter / pièce d’adaptateur

9292924646

9292929292

9292929246

TAB 131343.4

IIIIIIIVV

IIIIIIIVV% %

67,5 m + 3 m*62,3 m + 3 m*

8,48,38,27,9

6,46,46,46,36,1

4,54,54,54,54,54,54,54,5

2,92,92,92,92,92,92,92,92,9

76,8

6,16,165,8

4,14,14,14,14,1

2,52,52,52,52,52,5

4,84,8 3,9

3,9 2,22,22,22,22,2

Die Traglasten an der wippbaren Gitterspitze.Lifting capacities on the luffing lattice jib.Forces de levage à la fléchette treillis relevable.

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

28

LTM1250/1Die Hubhöhen.Lifting heights.Hauteurs de levage.

Wippbare Gitterspitze.Luffing lattice jib.Fléchette treillis relevable.

Teleskopausleger / Telescopic boom / Flèche télescopique: 75°

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

29

LTM1250/1

1618202224262830323436384042444648505254565860626466687072747678

1618202224262830323436384042444648505254565860626466687072747678

38,538,536,532,5

17,5 m17,5 m 21 m21 m 28 m28 m 35 m35 m 42 m42 m 49 m49 m 56 m56 m 63 m63 m 70 m70 m

15,5 m + 3 m* 25,9 m + 3 m*

m m

17,5 m – 70 m68°15,5 m – 25,9 m 360° 85 t

DINISO

Die Traglasten an der wippbaren Gitterspitze.Lifting capacities on the luffing lattice jib.Forces de levage à la fléchette treillis relevable.

* Adapter / adapter / pièce d’adaptateur

00000

4646000

TAB 131372.1/2

IIIIIIIVV

IIIIIIIVV% %

3734,5333225,2

29,12827,226,624,820,4

22,72221,621,421,219,716,9

17,817,41716,816,716,115,414,112,2

14,414,113,813,513,413,413,413,41311,810,3

11,311,110,910,710,610,610,510,310,1109,68,77,4

8,88,68,48,287,77,57,37,16,96,76,56,46,3

4,94,74,44,243,73,53,33,12,92,72,62,42,32,22,1

33,53128,927,5

30,528,426,625,1

24,823,922,821,720,720,1

19,31918,818,517,917,216,6

15,215,114,914,914,914,814,513,913,2

11,911,911,811,811,811,811,811,811,711,1

9,39,39,29,198,98,78,68,58,48,48,3

7,37,37,37,37,27,16,96,86,66,56,36,26,16,1

4,54,34,13,93,73,53,33,132,82,62,52,32,22,12,1

Fortsetzung

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

30

LTM1250/1

26283032343638404244464850525456586062646668707274

26283032343638404244464850525456586062646668707274

19,918,717,7

17,5 m 21 m 28 m 35 m 35 m42 m 42 m49 m 49 m56 m 56 m63 m 17,5 m 21 m 28 m

36,3 m + 3 m* 46,7 m + 3 m*

* Adapter / adapter / pièce d’adaptateur

m m

17,5 m – 63 m68°36,3 m – 67,5 m 360° 85 t

DINISO

92464600

9246464646

TAB 131372.3

IIIIIIIVV

IIIIIIIVV% %

18,417,316,4 15,6

14,814,113,512,9

13,212,612,111,611,110,7

1110,910,710,3109,69,38,98,7

8,78,78,78,78,68,387,87,57,3

6,96,96,96,96,96,96,86,66,46,26,16

5,25,25,25,25,25,25,25,25,25,254,94,8

13,112,411,8

1211,410,8 9,8

9,49,18,78,3

7,97,77,47,276,8

6,36,36,165,95,75,55,3

4,54,54,54,54,54,54,54,34,2

3,13,13,13,13,13,13,13,13,13,13,1

3638404244464850525456586062

3638404244464850525456586062

76,7

17,5 m 21 m 28 m 28 m 28 m35 m 35 m42 m

57,1 m + 3 m* 67,5 m + 3 m*

* Adapter / adapter / pièce d’adaptateur

m m

9292924646

9292929292

TAB 131372.4

IIIIIIIVV

IIIIIIIVV% %

62,3 m + 3 m*

9292929246

6,26

4,94,74,54,3

3,73,53,43,33,2

2,62,62,52,42,32,32,2

3,12,92,8 2,1

2,121,9

1,81,81,8

Die Traglasten an der wippbaren Gitterspitze.Lifting capacities on the luffing lattice jib.Forces de levage à la fléchette treillis relevable.

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

31

LTM1250/1Die Hubhöhen.Lifting heights.Hauteurs de levage.

Wippbare Gitterspitze.Luffing lattice jib.Fléchette treillis relevable.

Teleskopausleger / Telescopic boom / Flèche télescopique: 68°

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

32

LTM1250/1

3950

4000

14.00 R 25

16.00 R 25

3800

3850

2612

2552

3705

3755

2996

3046

2015

2065

330

380

400

450

15°

17°

17°

19°

11°

13°

A A B C D E F G α b b1

* abgesenkt / lowered / abaissé

Maße / Dimensions / Encombrement mm

150 mm*

Die Maße.Dimensions.Encombrement.

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

33

LTM1250/1

12 12 12 12 12 12 72t

1 2 3 4 5 6AchseAxle

Essieu

AntriebeDrive

Mécanismes

stufenlosinfinitely variableen continu

SeilØ / SeillängeRope diameter / Rope length

Diamètre du câble / Longueur du câble

Max. SeilzugMax. single line pullEffort au brin maxi.

m/min für einfachen Strangm/min single linem/min au brin simple

m/min für einfachen Strangm/min single linem/min au brin simple

ca. 60 s bis 82° Auslegerstellungapprox. 60 seconds to reach 82° boom angleenv. 60 s jusqu’à 82°

ca. 450 s für Auslegerlänge 15,4 m – 72 mapprox. 450 seconds for boom extension from 15,4 m – 72 menv. 450 s pour passer de 15,4 m – 72 m

Gesamtgewicht tTotal weight (metric tons)

Poids total t

Die Gewichte.Weights.Poids.

Die Geschwindigkeiten.Working speeds.Vitesses.

1

360°

2

%%

km/h

km/h

2000150014501040870500

175142108703110,5

181410631

39 %

43 %

97531–

13

8

15

8

22

13

24

14

34

20

37

22

50

29

55

32

70

40

76

44

12

7

14

7,5

0 – 135 23 mm / 360 m 105 kN

0 – 130 23 mm / 425 m 105 kN

0 – 1,6 min-1

1 12 23 34 45 5R R

Traglast tLoad (metric tons)Forces de levage t

1)

1)

1)

RollenNo. of sheaves

Poulies

SträngeNo. of lines

Brins

Gewicht kgWeight kgPoids kg

1) Es gelten die jeweiligen Ländervorschriften.The safety regulations of the respective country shall be applicable.Les spécifications de sécurité du pays concerné seront en vigueur.

14.00 R 25 16.00 R 25

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

��

Rahmen:Abstützungen:

Gitterspitzen:

2. Hubwerk:Zusatzballast:

Motor:

Klappspitzen:

Getriebe:

Achsen:

Federung:Gelenkwellen:

Bereifung:

Bereifung:

Lenkung:

Antrieb 12 x 8:Telma-Wirbelstrombremse:

Weitere Zusatzausrüstung auf Anfrage.

Bremsen:

Fahrerhaus:

Elektr. Anlage:

Eigengefertigte, verwindungssteife Kastenkonstruktion aus hochfestem Feinkorn-Baustahl.Vier hydraulisch ausfahrbare Schiebeholme mit hydraulischen Abstützzylindern und Drucktellern.Der vordere Stützkasten ist zwischen den Achsen 2 und 3, der hintere Stützkasten am Fahrgestell-heck angeordnet. Abstützbasis: 8,8 m längs x 8,5 m quer.

Einfach-Klappspitze 12,2 m lang, unter 0°, 20° oder 40° zum Teleskopausleger anbaubar.Doppel-Klappspitze 12,2 m – 22 m lang, unter 0°, 20° oder 40° zum Teleskopausleger anbaubar.

Automatik-Getriebe, Fabrikat Allison, Typ CLBT 755, mit Drehmomentwandler und Strömungs-bremse. 5 Vorwärts- und 1 Rückwärtsgang. Verteilergetriebe, 2-stufig, mit Verteilerdifferentialund Geländestufe.Wartungsarme Kranfahrzeugachsen. Alle 6 Achsen gefedert. Achsen 1 bis 3 sowie 5 und 6 gelenkt.Achsen 1, 5 und 6 sind Planetenachsen, Achse 5 mit Zwischenachsdifferential, alle angetriebenenAchsen mit Querdifferentialsperren.

Alle Achsen sind hydropneumatisch gefedert mit automatischer Niveauregulierung. Achsdruck-ausgleich zwischen den Achspaaren 1 + 2, 3 + 4 und 5 + 6. Federung hydraulisch blockierbar.

Alle Gelenkwellen mit 70° Kreuzverzahnung und wartungsfrei.

12fach, alle Achsen einzeln bereift. Reifengröße: 14.00 R 25.

12fach, alle Achsen einzeln bereift. Reifengröße 16.00 R 25.

ZF-Halbblock-Hydrolenkung, 2-Kreisanlage mit hydraulischer Servoeinrichtung und zusätzlicherReservepumpe, von der Achse angetrieben.

Zusätzlich wird die 3. Achse angetrieben.An der 4. Achse angebaut, zur Erhöhung der Dauerbremsleistung.

Betriebsbremse: Allrad-Servo-Druckluftbremse, 2-Kreisanlage.Zusatzbremsen: Auspuffklappenbremse mit Liebherr-Zusatzbremssystem, Retarder imAutomatikgetriebe.Handbremse: Federspeicher auf alle Räder der 2. bis 6. Achse wirkend.Großräumige Kabine in Stahlblechausführung, Kataphorese tauchgrundiert, gummielastischaufgehängt, Sicherheitsverglasung, Bedienungs- und Kontrollinstrumente.Moderne Datenbus-Technik zur Steuerung der elektrischen und elektronischen Komponenten,24 Volt Gleichstrom, 2 Batterien mit je 170 Ah, Beleuchtung nach StVZO.

8-Zylinder-Diesel, Fabrikat Liebherr, Typ D 9408 TI-E, wassergekühlt, Leistung nach DIN440 kW (598 PS) bei 1900 min nach ECE-R 24.03 und 2001/27/EG (Euro 3), max. Drehmoment2600 Nm bei 1400 min , Kraftstoffbehälter: 600 l.

-1

-1

Feste Gitterspitze 14 m – 42 m lang, unter 0°, 20° oder 40°, wippbare Gitterspitze 17,5 m – 70 mlang.Für den 2-Hakenbetrieb bzw. zum Verstellen der wippbaren Gitterspitze.2 zusätzliche seitliche Einhängeklötze à 12,5 t für einen Gesamtballast von 97,5 t.

Das Kranfahrgestell.

Rahmen:

Kranmotor:

Kranantrieb:Steuerung:

Hubwerk:

Wippwerk:Drehwerk:Krankabine:

Sicherheits-einrichtungen:Ballast:Teleskopausleger:

Elektr. Anlage:

Eigengefertigte, verwindungssteife Schweißkonstruktion aus hochfestem Feinkorn-Baustahl.Als Verbindungselement zum Kranfahrgestell dient eine Rollendrehverbindung, dieunbegrenztes Drehen ermöglicht.

Über zwei 4fach Handsteuerhebel, selbstzentrierend. Elektronische Steuerung über die LICCON-Anlage. Stufenlose Regulierung aller Kranbewegungen durch Verstellen der Hydraulikpumpen,zusätzliche Geschwindigkeitsregelung durch Verstellen der Dieselmotor-Drehzahl.Axialkolben-Verstellmotor, Liebherr-Seilwinde mit eingebautem Planetengetriebe und feder-belasteter Haltebremse.1 Differentialzylinder mit Sicherheitsrückschlagventil.Hydromotor, Planetengetriebe, Drehwerksritzel und federbelasteter Haltebremse.Kabine in verzinkter Stahlblechausführung pulverbeschichtet, Sicherheitsverglasung,Bedienungs- und Kontrollinstrumente. Kabine um 20° nach hinten neigbar.LICCON-Überlastanlage, Testsystem, Hubendbegrenzung, Sicherheitsventile gegen Rohr- undSchlauchbrüche.72,5 t Ballast bestehend aus: 1 Grundplatte 10 t, 3 Teile à 12,5 t, 2 seitliche Einhängeklötze à 12,5 t.1 Anlenkstück und 5 Teleskopteile. Alle Teleskope separat ausschiebbar über das Schnelltakt-Teleskopiersystem TELEMATIK.Auslegerlänge: 15,4 m – 72 m.

Moderne Datenbus-Technik, zur Steuerung der elektrischen und elektronischen Komponenten,24 Volt Gleichstrom, 2 Batterien mit je 170 Ah.

4-Zylinder-Diesel, Fabrikat Liebherr, Typ D 924 TI-E, wassergekühlt, Leistung nach DIN 180 kW(245 PS) bei 1800 min , max. Drehmoment 1080 Nm bei 1150 min . Kraftstoffbehälter: 250 l-1 -1

Diesel-hydraulisch mit 5 Axialkolben-Verstellpumpen mit Servosteuerung und Leistungsregelung.

Der Kranoberwagen.

Die Zusatzausrüstung.

LTM1250/1

Zwischenstücke: 2 Zwischenstücke à 7 m lang zur Verlängerung der Doppelklappspitze auf 29 m bzw 36 m.

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

��

LTM1250/1

Frame:

Outriggers:

Lattice jibs:Intermediate sections:

2nd hoist gear:Additional counterweight:

Engine:

Folding jibs:

Transmission:

Axles:

Suspension:

Tyre equipment:

Cardan shaft:

Tyre equipment:

Steering:

Drive 12 x 8:TELMA-type eddycurrent brake:

Further equipment available on request.

Brakes:

Driving cab:

Electrical system:

Liebherr designed and manufactured, box-type, torsion resistant design of high-tensile finegrained structural steel.Four hydraulically extendable sliding beams with hydraulic jacks and supporting pads. The frontoutrigger casing is mounted between axles 2 and 3 and the rear casing is located at the rear ofthe carrier. Supporting basis: 8,8 m longitudinally x 8,5 m transversally.

Single folding jib, 12,2 m long, for mounting on telescopic boom at 0°, 20° or 40°.Double folding jib, 12,2 m to 22 m long, for mounting on telescopic boom at 0°, 20° or 40°.

Automatic transmission, make Allison, type CLBT 755, with torque converter and hydrodynamic brake,5 forward speeds, 1 reverse. Two stage transfer case with transfer differential and off-road ratio.

Crane carrier axles of minor maintenance. All axles suspended. Axles 1 to 3 and 5 and 6 steered.Axles 1, 5 and 6 are planetary axles, intermediate differential at axle 5, all driven axles withtransverse differential locks.

All axles with hydropneumatic suspension and automatic levelling system. Load equalizationbetween the axle pairs 1 + 2, 3 + 4 and 5 + 6. The suspension can be locked hydraulically.12 tyres, all axles equipped with single tyres.Size of tyres: 14.00 R 25.

All cardan shafts with 70° diagonal toothing and maintenance-free.

12 tyres, all axles with single tyres. Tyre size 16.00 R 25.

ZF semi-integral power steering, dual circuit system with hydraulic servo-system and additionalbacking pump driven by an axle.

Axle 3 additionally driven.Fitted to the 4 axle for increasing the sustained-action braking performance.th

Service brake: All-wheel servo-air brake, dual circuit system.Supplementary brakes: Exhaust brake with Liebherr supplementary brake system, retarder in theautomatic transmission.Hand brake: Spring-loaded, acting on all wheels of axles 2 to 6.Spacious sheet steel cab, cataphoretic dip-primed, mounted on rubber shock absorbers, safety glasswindows, operating and control elements.Modern data bus technique for the control of the electric and electronic components.24 Volt DC, 2 batteries of 170 Ah each, lighting according to traffic regulations.

8-cylinder Diesel engine, make Liebherr, type D 9408 TI-E, watercooled, output acc. to DIN440 kW (598 HP) at 1900 min acc. to ECE-R 24.03 and 2001/27/EG (Euro 3), max. torque2600 Nm at 1400 min . Fuel tank: 600 l.

-1

-1

Fixed lattice jib 14 m to 42 m long, installation at 0°, 20° or 40°, luffing lattice jib 17,5 m to 70 m long.2 intermediate sections of 7 m each for the extension of the biparted swing-away jib to 29 m or 36 m.

For 2-hook operation or for operating the luffing lattice jib.2 additional lateral hang on slabs of 12,5 t each for a total counterweight of 97,5 t.

Crane carrier.

Complementary equipment.

Frame:

Crane engine:

Crane drive:

Crane control:

Hoist gear:

Luffing gear:Slewing gear:Crane cab:

Safety devices:

Counterweight:

Telescopic boom:

Electric system:

Liebherr-made torsion resistant, welded construction of high-tensile structural steel, linked tocarrier by a roller slewing rim for 360° continuous rotation.

Two self-centering control levers (joy-sticks). Electronic control by means of the LICCON system,infinitely variable crane motions through displacement control of the hydraulic pumps.Additional working speed control by variation of the Diesel engine speed.Axial piston variable displacement motor, Liebherr hoist drum with integrated planetary gearand spring-loaded static brake.1 differential hydraulic rams with nonreturn valve.Hydraulic motor, planetary gear, slewing pinion and spring-loaded static brake.Galvanized steel construction, powder coating, safety glazing, operating and control elements.Cab tiltable backwards by 20°.LICCON safe load indicator, test system, hoist limit switches, safety valves against rupture ofpipes and hoses.72,5 t counterweight comprising 1 basic slab of 10 t and 3 slabs of 12,5 t each,2 lateral hang on slabs of 12,5 t each.1 base section and 5 telescopic sections. All telescopic sections extendable individually by meansof the rapid-cycle telescoping system TELEMATIK.Boom length 15,4 m to 72 m.

Modern data bus technique for the control of the electric and electronic components,24 Volt DC, 2 batteries of 170 Ah each.

4-cylinder Diesel engine, make Liebherr, type D 924 TI-E, watercooled, output acc. to DIN180 kW (245 HP) at 1800 min , max. torque 1080 Nm at 1150 min . Fuel tank capacity: 250 l-1 -1

Diesel-hydraulic, with 5 axial piston variable displacement pumps, with servo-control andcapacity control.

Crane superstructure.

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

LTM1250/1

Châssis:

Stabilisateurs:

Fléchettes:Deuxième treuil:

Moteur:

Fléchettes pliante:

Boîte de vitesse:

Essieux:

Arbres articulés:Suspension:

Pneumatiques:

Pneumatiques:

Contrepoidscomplémentaire:

Direction:

Entraînement 12 x 8:Frein Telma:

Autres équipement supplémentaires sur demande.

Freins:

Cabine:

Installation électrique:

Fabrication Liebherr, construction en caisson indéformable, en acier à haute résistance à grainsfins.Quatre poutres horizontales télescopiques, avec vérins hydrauliques de calage verticaux et patins.Les caissons de poutres de calage avants sont situés entre les essieux 2 et 3, et les caissons despoutres de calage arrières sont situés à l'arrière du châssis. Surface de calage: 8,8 m en long et8,5 m travers.

Fléchette pliante, 12,2 m, pour le montage à la flèche télescopique à 0°, 20° ou 40°.Fléchette pliante double, 12,2 m à 22 m, pour montage à la flèche télescopique à 0°, 20° ou 40°.

Boîte automatique de marque Allison, type CLBT 755, avec convertisseur de couple et ralentisseurhydraulique intégré. Cinq rapports avants et 1 rapport arrière. Boîte de transfert à 2 rapports avecblocage de différentiel et étage vitesses terrain.

Essieux de la grue exempts d'entretien, les 6 essieux sont suspendus. Les essieux 1 à 3, 5 et 6 sontdirecteurs. Les essieux 1, 5 et 6 sont des essieux planétaires, entraînés, différentiel intermédiaire àl'essieu 5, tous les essieux moteurs sont munis de dispositifs de blocage du différentiel transversal.Tous les arbres articulés à denture étagée de 70° et exempts d'entretien.Tous les essieux sont suspendus hydropneumatiquement avec mise à niveau et équilibrage entreessieux automatiques. Egalisation de la charge par essieu entre essieux 1 + 2, 3 + 4 et 5 + 6.Suspension blocable hydrauliquement.12 roues à monte simple. Taille: 14.00 R 25

12 fois, tous les essieux munis de roues simples. Taille 16.00 R 25.2 blocs latéraux de suspension de 12,5 t pour un contrepoids total de 97,5 t.

Direction semi-bloc ZF, à double circuit, assistée hydrauliquement, avec pompe auxiliaireentraînée par un essieu.

3ème essieu est entraîné additionnellement.Monté sur le 4ème essieu pour augmenter la puissance de freinage continu.

Frein de service: à double circuit assisté pneumatiquement, sur toutes les roues.Freins supplémentaires: frein à clapet d'échappement avec systèm de freinage supplémentaireLiebherr, ralentisseur dans la boîte automatique.Frein de secours et frein à main: par cylindres à ressorts sur les essieux 2 à 6.Cabine spacieuse, tôle d'acier, revêtue anti-corrosion par bain de cataphorèse, suspendue sursilent blocs, vitrage de sécurité, tableau de bord complet.Technologie de bus de données moderne pour la commande des composants électriques etélectroniques, courant continu 24 Volts, 2 batteries de 170 Ah chacune, éclairage conforme aucode de la route.

Diesel 8 cylindres, marque Liebherr, type D 9408 TI-E, refroidi par eau, puissance selon DIN440 kw (598 ch) à 1900 min selon ECE-R 24.03 et 2001/27/EG (Euro 3), couple max. 2600 Nm à1400 min . Réservoir à carburant: 600 l.

-1

-1

Fléchette fixe de 14 m à 42 m; montable à 0°, 20° ou 40° fléchette à volée variable de 17,5 m à 70 m.Pour le travail avec 2 crochets ou le relevage de la fléchette à volée variable.

Châssis porteur.

Châssis:

Moteur:

Entraînement:Commande:

Treuil:

Relevage de flèche:Orientation:Cabine de grue:

Sécurités:

Contrepoids:

Construction mécanosoudée en tôle d'acier à haute résistance à grains fins. Reliée au porteur parune couronne d'orientation à 3 rangées de rouleaux. Rotation totale 360°.

2 leviers à 4 directions avec rappel automatique au point mort. Commande électronique via ledispositif LICCON. Commande des mouvements progressive en continu par variation del'inclinaison des pompes et augmentation du régime moteur.Moteur hydraulique à cylindrée variable, treuil de marque Liebherr avec réducteur planétaire àfrein d'arrêt à lamelles intégrées.1 vérin hydraulique différentiel avec clapet anti-retour de sécurité.Un moteur hydraulique, un réducteur planétaire, un pignon d'orientation et un frein à lamelles.En tôle d'acier galvanisée, peinte par poudrage polyester et cuisson au four, avec vitrage de sécurité,dôtées de tous les éléments de contrôle et de commande, cabine inclinable vers l'arrière de 20°.Contrôleur de charge LICCON, système test, fin de course crochet haut, clapets de sécurité en casde ruptures de flexibles.72,5 t, composé d'une plaque de base de 10 t et 3 plaques de 12,5 t unitaires, 2 blocs latéraux desuspension de 12,5 t.

Flèche télescopique:

Circuit électrique:

Un élément de base et de 5 télescopes. Chaque partie peut être télescopée individuellement àl'aide du système de télescopage séquentiel rapide TELEMATIK.Longueur de flèche: 15,4 m – 72 m.

Technologie de bus de données moderne pour la commande des composants électriques etélectroniques, courant continu 24 Volts, 2 batteries de 170 Ah chacune.

Diesel 4 cylindres, marque Liebherr, type D 924 TI-E, refroidi par eau, puissance DIN 180 kw(245 ch) à 1800 min , couple max. 1080 Nm à 1150 min . Réservoir à carburant: 250 l.-1 -1

Diesel hydraulique à 3 pompes à débit variable servo commandées à régulation de puissance.

Partie tournante.

Equipement optionnel.

Eléments intermédiaires: 2 éléments intermédiaires de 7 m de long pour l'allongement de la fléchette pliante double jusqu'à29 m resp. 36 m.

��

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

37

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

TP 314d.02.03Änderungen vorbehalten. / Subject to modification. / Sous réserve de modifications.

Nehmen Sie Kontakt auf mitPlease contactVeuillez prendre contact avecLIEBHERR-WERK EHINGEN GMBHD-89582 Ehingen/Donau, +49 (0) 73 91 5 02-0, Telefax +49 (0) 73 91 5 02-33 99www.liebherr.com, E-mail: [email protected]

View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com