TECHNICAL STANDARDS - mdmetric.com · superior quality affordable tools 477 tools striking 10...

483

487

491

503

485

488

492

DEAD BLOW HAMMERS

PLASTIC AND RUBBER MALLETS AND HAMMERS

BALL PEIN & CLAW HAMMERS

DRILLING & SLEDGE HAMMERS

HOLLOW PUNCH SETS

CHISELS, PUNCHESAND DRIFT PINS

ALIGNMENT BARS

Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M

Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329

476

TECHNICAL STANDARDS

B107.53M “Ball Pein Hammers: Safety Requirements”B107.56 “Body Repair Hammers: Safety Requirements”B107.54 “Heavy Striking Tools: Safety Requirements”B148.97 “Aluminum - Bronze Sand Casting”

B107.47M “Metal chisels: safety requirements”B107.48M “Metal Punches and Drift Pins Safety Requirements”

GGG-H-86-C “Hammer (Forged steel head)”

GGG-C-313C “Chisels, hand: cape, diamond point, cold, round nose and side Cutting”GGG-C-330C “Chisels. Tools blanks, Caltiking Tools and metal-forming Tools, Power Hammer”GGG-B-101E “Bars, Chisel, Pinch, Pry, Wrecking; digging; tamping, Digging, And Crowbars”GGG-P-831E “Punches; Center, coopers, drive pin, Aligning, and prick”GGG-P-833A “Punches, Cutting”

DIN7462: 1970-05 “Wooden hammers”DIN7482: 1966-11 “Wooden handles for eyed wood bits”DIN5130: 1974-02 “Copper hammers”

DIN5138: 1973-03 “Chisel Handles”DIN5139: 1973-03 “Firmer chisels with tang”DIN5143: 1973-03 “Mortise chisel”DIN5154: 1973-03 “Chisels; technical specifications”DIN5155: 1973-03 “Chisels; denominations”DIN6450: 1984-11 “Pin punches”DIN6451: 1985-01 “Cape chisels”DIN6453: 1984-11 “Flat chisels”DIN6455: 1984-11 “Grooving chisels”DIN6458: 1984-11 “Drift punches”DIN7200: 1968-03 “Hollow punches”DIN7250: 1984-11 “Center punches”DIN7254: 1984-11 “Mason chisels”DIN7255: 1984-11 “Engineers’ cold chisels and allied tools; technical specifications”DIN7256: 1984-11 “Pointed chisels”

HAMMERS AND MALLETS APPLICABLE STANDARDS FOR: APPLICABLE STANDARDS FOR:

CHISELS, DRIFT PINS & PUNCHES

URREA manufactures its tools according to technical product standards.

A technical product standard is a document specifying design and manufacturing guidelines to ensure adequate product performance under conditions that meet users’ requirements. These standards are issued by private or government bodies and associations.

The only organization to issue international standards is known as ISO (International Organization for Standardization). It issues the ISO 9000 series, related to quality systems, although it also issues product technical standards. There are various associations that issue or used to issue standards, such as GSA/US FEDERAL, ASME, ANSI, ISO; similarly, in Europe there is DIN (Deutsches Institut für Normung e.V.) German Institute for Standardization,

which groups together different organizations and committees dedicated to promoting the standardization and quality of products commercialized in Germany.

The hand tool standards, known as Federal (in Mexico) are no longer updated and are being absorbed by ASME. The same is happening to standards issued by ANSI.

Nowadays, ASME standards for hand tools are initially reviewed by committees formed by different tool manufacturers, users, and distributors so they can be approved and issued by ASME.

SAE standards (in particular are those applicable to the aerospace industry) are stricter standards, that for the most part, demand smaller tool dimensions and greater resistance.



477SUPERIOR QUALITY AFFORDABLE TOOLS

TOOLSSTRIKING

10

TECHNICAL STANDARDS

STRIKING AND TENSION TESTS FOR HAMMERS AND MALLETSASME B107.53M, B107.56 & B107.54 STANDARDS

STRIKING TEST TENSION TEST DEVICE

Consists of striking the tested hammer or mallet on a steel block a set number of times. The steel block must have a hardness between 92 and 105 °HRb. The tool's strike faces must not show any marks, fractures or deformations, or any type of failure.

After the striking test, the tool undergoes a tension test where a given force is applied parallel to the handle. The head must withstand the force without coming apart from the tool.

RESULTADOS PRUEBA DE TENSIÓN MARTILLOS Y MARROS

1000

Lower Spec

2000 3000 4000 5000 6000

RESULTS

HAMMER AND MALLET TENSION TEST RESULTS

BALL PEIN HAMMER TENSION PERFORMANCE

ASME/ANSILB-INCH

RESULTSDESEMPEÑO DE TENSIÓN DE MARTILLOS DE BOLA

0 500

1,00

0

1,50

0

2,00

0

2,50

0

3,00

0

3,50

0

1324-PN1332-PN1340-PN

Lbf.

Lbf.

ASME/ANSILB-PULG

ASME/ANSILB-PULG

DESEMPEÑO DE MARROS DE ACERO

0 50,0

00

100,

000

150,

000

200,

000

250,

0000

1433G1434G1435G1436G1437G

Lbf=Pounds force



478

TECHNICAL STANDARDS

HAMMER AND MALLET HARDNESS TESTSASTME 18 STANDARD

A Rockwell hardness tester is used for this test. A load perpendicular to the testing surface is applied and the result directly depends on the diamond tip's penetration into the tested element (According to ASTME 18).

HARDNESS TEST PRESS

FLEXION TEST

SHORT-TERM CAPABILITY

HARDNESS READINGS' STATISTICAL TEST PERFORMED ON URREA HAMMERS DUREZAS MEDIDAS EN MARTILLOS

45

Lower Spec Upper Spec

47 49 51 53 55 57 59

RESULTS

OpCPUCPLOpkOpm

16.9221.9311.9111.91

*

TargUSLLSLkn

*60.00045.0000.296

25.000

MeanMean+3sMean-3ss

50.280050.723349.83670.1478

%>USL ExpObs

%<LSL ExpObs

0.000.000.000.00

PPM>USL ExpObs

PPM<LSL ExpObs

0000

FLEXION TESTS FOR HAMMERS AND MALLETSASME B107.53M, B107.56 & B107.54 STANDARDS

In this test the tool's head is firmly fastened. The other end is suspended and is positioned perpendicular to the grip. In the testing device, one of the strike faces will be positioned face down and a load will be applied on the handle's end, where users normally hold it, about 10" from the head's farthest point.The hammer or mallet must resist this test without breaking or fracturing.




TOOLSSTRIKING

10

SPECIFICATIONS AND STANDARDS

HARDNESS TEST FOR CHISELS, PUNCHES, & DRIFT PINS

IMPACT TEST FOR CHISELS IMPACT TEST FOR DRIFT PINS

ASTME 18 STANDARDThis hardness test must be done on the striking area as well as on the cutting end. The test is performed using a Rockwell hardness tester, which features a diamond tip upon which a load perpendicular to the testing surface is applied. The result directly depends on the diamond tip's penetration into the tested element (According to ASTME 18).The hardness on the cutting end must be measured at no less than 1/4" from the edge.

HARDNESS TEST PRESS

IMPACT TEST IMPACT TEST

HARDNESS READINGS' STATISTICAL TESTS PERFORMED ON URREA CHISELS

OpCPUCPLOpkOpm

2.763.561.951.95

*

TargUSLLSLkn

*60.000048.00000.2917

12.0000

MeanMean+3sMean-3ss

52.250054.426050.07400.7253

%>USL ExpObs

%<LSL ExpObs

0.000.000.000.00

PPM>USL ExpObs

PPM<LSL ExpObs

0000

The chisel must be vertically mounted on a 1/4" diameter bar. The chisel's cutting line must form a 90° angle with the shaft's centering line.The bar must rest on a steel block weighing at least 200 lb (91 kg) and have a 35 HRc.The chisel is struck by a load according to its size. The load must be a piece of steel with a 45-60 HRc hardness. After repeating the impact 20 times, no fracturing or chipping should be visible, or any other type of damage, or failure.

The chisel must be vertically mounted on a 1/4" thick steel plate with 45-50 HRc hardness.The plate must rest on a steel block at least 200 lb (91 kg) in weight and have a 35 HRc minimum hardness.The drift pin is struck by a load according to its size. The load must be a piece of steel with a 45-60 HRc hardness. After repeating the impact 20 times, no fracturing or chipping should be visible, or any other any other type of damage, or failure.

DUREZAS MEDIDAS EN CINCELES

Lower Spec Upper Spec

49 51 53 55 57 59

RESULTS

SHORT-TERM CAPABILITY



480

QUICK SELECTION GUIDE FOR STRIKING TOOLS

STRIKING TOOLS

www.urreaprofessionaltools.com

(800) 366-6911

For your convenience the

products in this catalog can be

found on our Website at www.

urreaprofessionaltools.com, a

quick and free service available

24 hours a day. Thanks to its

specialized search engine you

can quickly and easily find the

products you are looking for.

VISIT US ONLINE

HEAD WEIGHT

DRILLING & SLEDGE DEAD BLOWBRONZE

INTERCH. FACERUBBER BALL PEIN BODYWORKPLASTICSET RUBBER

23 4 6 8 10 12 16 3.6 7 8 12 13 16 18 22 24 26 29 32 36 38 40 444854

1433GFV

1430FV

1432FV

1430DBX 1332FV 1332P 1332PN1332E1430

1432

1436DB

1439DB

1435DB

1383SF150HK SF150 1434PDB

1435PDB1326DB

1336DB

1344DB1348DB 1432DB 1348P 1348PN

1430DB1340FV 1340P 1340PN

1324FV 1324P 1324E 1324PN

1367

1366

1368

1316P 1316PN 1421

1428

1424

1364 1427

1308FV1312FV

1316FV

1308P1312P

1308PN1312PN

1438GFV1439GFV1440GFV 1440G

1438G1439G

1434GFV1435GFV1436GFV1437GFV 1437G

1436G1435G1434G1433G

490PAGE

488PAGE

489PAGE

488PAGE

488PAGE

487PAGE

487PAGE

487PAGE

486PAGE

486PAGE

486PAGE

486PAGE

485PAGE

485PAGE

485PAGE

484PAGE

484PAGE

483PAGE

483PAGE

LB

OZ




TOOLSSTRIKING

10

QUICK SELECTION GUIDE FOR STRIKING TOOLS

STRUCK TOOLS

3/16”1/4”

1/4” x 1/16”1/4” x 3/32”

5/16”5/16” x 1/8”5/16” x 5/32”

3/8"3/8” x 3/16”3/8” x 5/32”

7/16”7/16” x 7/32”

1/2”1/2” x 1/4”1/2” x 5/16”

1/2” x 7”5/8”3/4”

3/4” x 8”3/4” x 12”7/8” x 8”7/8” x 12”

1” x 8”1” x 12”

SIZE

PUNCHESCENTERING

90ODRILLING

50O

CHISELS

50-3/16

50-5/16

86A-3/1641-1/4

41-5/16

41-3/8

41-7/16 44-7/16

41-1/2 44-1/2

41-5/8 44-5/849920

49922

96-5/896-3/4

86A-5/8

86A-3/4X886A-3/4X1286A-7/8X8

86A-7/8X1286A-1X8

86A-1X12

76-5/8

96-1/2 50-1/2

44-3/8

44-1/4

44-5/16

96-1/4

96-5/16

96-3/8

96-7/16 50-7/16

50-3/8 86A-3/8

86A-5/16

86A-7/16

86A-1/2 76-1/2

76-3/8 72-3/8

47-1/4X1/1647-1/4X3/32

47-5/16X1/847-5/16X5/32

48-3/8X3/16 47-3/8X3/1648-3/8X5/32

48-7/16X7/32

48-1/2X5/1648-1/2X1/4 47-1/2X1/4

47-7/16X7/32

50-1/4 86A-1/4 76-1/4

76-5/16 72-5/16

72-1/4

500PAGE

500PAGE

500PAGE

497PAGE

497PAGE

496PAGE

496PAGE

498PAGE

498PAGE

492PAGE

URREA tools are designed to

offer precision, quality and

endurance.

They are made by highly

qualified employees.

They are marked with the

country of origin, following

the strictest quality

standards.


(800) 366-6911

THE BEST WARRANTY

PNEUMATICTOOLS

HAND TOOLS



482

QUICK SELECTION GUIDE FOR STRUCK TOOLS

STRUCK TOOL SETS

SHORTGUIDEPUNCHES

CHISELS

NO.4

6

NO.6

NO.5

NO.2

86D

96A

86B

47A

50A

NO.4

NO.3

48A

99B

41A

86C

86A

4990

3

26P

IECE

S

16P

IECE

S

12P

IECE

S

10P

IECE

S

10P

IECE

S

7PI

ECES

7PI

ECES

7PI

ECES

6PI

ECES

5PI

ECES

5PI

ECES

5PI

ECES

5PI

ECES

5PI

ECES

5PI

ECES

5PI

ECES

3PI

ECES

SIZECODE

BRONZEPUNCH

CENTERPUNCHES

PINPUNCHES

LONGGUIDEPUNCHES

499204992286A-3/1686A-1/486A-5/1686A-3/886A-7/1686A-1/286A-5/886A-3/4X886A-7/8X886A-1X841-1/441-5/1641-3/841-1/241-5/844-5/1644-3/848-3/8X5/3248-3/8X3/1648-7/16X7/3248-1/2X1/448-1/2X5/1647-1/4X1/1647-1/4X3/3247-5/16X1/847-5/16X5/3247-3/8X3/1647-7/16X7/3247-1/2X1/496-1/496-5/1696-3/896-7/1696-1/296-5/896-3/450-3/1650-1/450-5/1650-3/850-7/1650-1/2

1/2”3/4”3/16”1/4”5/16”3/8”7/16”1/2”5/8”3/4” x 8”7/8” x 8”1” x 8”1/4”5/16”3/8”1/2”5/8”5/16”3/8”3/8” x 5/32”3/8” x 3/16”7/16” x 7/32”1/2” x 1/4”1/2” x 5/16”1/4” x 1/16”1/4” x 3/32”5/16” x 1/8”5/16” x 5/32”3/8” x 3/16”7/16” x 7/32”1/2” x 1/4”1/4”5/16”3/8”7/16”1/2”5/8”3/4”3/16”1/4”5/16”3/8”7/16”1/2”

492PAGE

499PAGE

499PAGE

498PAGE

496PAGE

495PAGE

494PAGE

494PAGE

495PAGE

495PAGE

499PAGE

495PAGE

499PAGE

494PAGE

493PAGE

493PAGE

493PAGE




TOOLSSTRIKING

10

BRONZE HAMMERS

STRIKING TOOLS

BRONZEHAMMER WITHFIBERGLASSHANDLE

STANDARD: FEDERAL GGG-H-33a

1430FV1432FV

CODE FACE DIAMETER

HEAD LENGTH

TOTAL LENGTH

L WEIGHT

mm34.950.8

in.1 3/8

2

mm87.395.2

in.3 7/163 3/4

mm342.9355.6

in.13 1/2

14

gm8121750

lb.1.793.85

1432FV

Bronze head does not deform stricken materials.

Fiberglass ergonomic handle

Bronze hammers do not give off sparks when striking other metals, making them a very safe tool for use in flammable environments or for precision

work such as bushings, transmissions, etc.

1432

BRONZEHAMMER WITHWOODENHANDLE

STANDARDS: FEDERAL GGG-H-33a

14301432

CODE FACE DIAMETER

HEAD LENGTH

TOTAL LENGTH

L WEIGHT

mm34.950.8

in.1 3/8

2

mm87.395.2

in.3 7/163 3/4

mm342.9355.6

in.13 1/2

14

gm.8851700

lb.1.953.74

Impact-resistant oak handle.

DEAD BLOW HAMMERS

HOLE PUNCH SETS

CHISELS, PUNCHES & DRIFT PINS

ALIGNMENT BARS

BALL PEIN HAMMERS

RUBBER MALLETS AND PLASTIC FACE HAMMERS

HAMMERS



484

OCTAGONALSLEDGEHAMMER WITHFIBERGLASSHANDLE

STANDARDS: FEDERAL GGG-H-86c, ASME B107.54

1433GFV1434GFV1435GFV1436GFV1437GFV1438GFV1439GFV1440GFV

CODE FACE DIAMETER

HEAD WEIGHT

HEAD LENGTH

HANDLE LENGTH

WEIGHT

mm4144525660646875

in.1 5/81 3/4

2 1/162 3/162 3/82 1/2

2 11/162 15/16

mm114130143152165175195214

in.4 1/25 1/85 5/8

66 1/26 7/8

7 11/168 7/16

mm387387387914914914914914

in.15 1/415 1/415 1/4

3636363636

gm11351620223034004300521061207930

lb.2.53.64.97.59.511.513.517.5

lb.23468

101216

STEELOCTAGONALSLEDGEHAMMER,AMERICANHICKORY36"HANDLE

STANDARDS: ASME B107.54, FEDERAL GGG-H-86

1436G1437G1438G1439G1440G

CODE FACE DIAMETER

HEAD WEIGHT

HEAD LENGTH

HANDLE LENGTH

WEIGHTmm5660646875

in.2 3/162 3/82 1/2

2 11/162 15/16

mm152165175195214

in.6

6 1/26 7/8

7 11/168 7/16

in.36 36 36 36 36

mm914914914914914

gm33404220514061007850

lb.7.49.311.313.417.3

lb.68101216

STEELOCTAGONALSLEDGEHAMMER,AMERICANHICKORY12"HANDLE


1433G1434G1435G

CODE FACE DIAMETER

HEAD WEIGHT

HEAD LENGTH

HANDLE LENGTH

WEIGHTmm414452

in.1 5/81 3/4

2 1/16

mm114130143

in.4 1/25 1/85 5/8

in.121212

gm108515702150

lb.2.43.54.7

lb.234

ENGINEERSLEDGEHAMMERWITH AMERICANHICKORY16"HANDLE


CODE FACE DIAMETER

HEAD WEIGHT

HEAD LENGTH

HANDLE LENGTH

WEIGHT

1433EG1434EG1435EG

mm414452

in.1 5/81 3/42 1/16

mm114130143

in.4 1/25 1/85 5/8

in.161616

gm143016802350

lb.3.23.75.2

lb.234

STRIKING TOOLS

STEEL OCTAGONAL SLEDGE HAMMERS

1435GFV

SPAREHANDLESFOR AMERICANHICKORYSLEDGEHAMMERS

CAB7UHCAB10UH

CODE TOTAL LENGTH

L

mm305914

in.1236

gm180675

lb.0.401.50

CAB10UH

1436G

1434G

1435G

1433G

1433EG

Standard eye

Double wedge hafting, with wood and metal.

USED IN:• Construction• Industrial Maintenance• Railroad Industry• Mining

NOTE:These are not non-spark sledge hammers.Not recommended in flammable, volatile, or corrosive environments.

Epoxy resin connection guarantees secure hafting.

• Carbon steel forged head, quenched and tempered.

• 50 HRc hardness.• Beveled and polished faces.

AMERICAN

HICKORY

AMERICAN

HICKORY

Includes wood and metal wedges

DEAD BLOW HAMMERS

HOLE PUNCH SETS


ALIGNMENT BARS

BALL PEIN HAMMERS

RUBBER MALLETS AND PLASTIC FACE HAMMERS

HAMMERS




TOOLSSTRIKING

10

STRIKING TOOLS

INTERCHANGEABLE FACE DEAD BLOW HAMMERS

Super soft (gray)

Soft (brown)

Medium (red)

Rugged use (green)

Medium rough (beige)

Hard (black)

Extra hard (yellow)

Steel

Hammer

1 Plastic case

Faceassortment:C O N T E N T S

9 interchangeable faces, each with a different Shore or Rockwell hardness, measurement used to assign a hardness value on soft materials such as plastic, rubber, non-tempered steel, etc.

Thesehammershavetwomaincharacteristics.First,anydeformationsderivingfromthestrikeactionoccuronthehammerfacesandnotonthestrickenobject.Second,thehammer'shollowheadisfilledwithsteelshot.Thisshotworksasastrikevibrationdissipater,preventingthehammerfrombouncingwitheachblow,thuscreatingadeadblow.

Includes8faces

Strike deformations occur on the faces, not on the object.

SF15SS SF15M

SF15ST

SF15MH

SF15T

SF15XH

SF15H

SF16B

SF16S

16OZ.WITHINTERCHANGEABLEFACES

SF150HK

HEAD

HEAD DIAMETER

HEAD LENGTH

TOTAL LENGTH

L

in.1 1/2

mm38.1

in.4

mm101.6

lb.1

oz.16

in.11 1/2

mm292.1

gm1374

TOTAL

lb.3.02

9-PIECE SET

INTERCHANGEABLEFACESFOR11/2”DEADBLOWHAMMERS

SF15SS

SF15STSF15MSF15TSF15MHSF15HSF15XHSF16SSF16B

CODE STRIKE FORCE

SUPER SOFT

SOFTMEDIUMRUGGED

MEDIUM HARDHARD

EXTRA HARDSOLIDSOLID

FACE COLOR

LIGHT GRAY

BROWNRED

GREENBEIGEBLACK

YELLOWSTEEL FACE

BRONZE FACE

PVC

PVCPVCPVC

POLYURETHANEPOLYURETHANEPOLYURETHANE

STEELBRONZE

HARDNESS MATERIAL

SHORE A INSTANTANEOUS, 45-58SHORE A 30 SEC, 45-58SHORE A 30 SEC, 59-72SHORE A 30 SEC, 59-73SHORE D 30 SEC, 40-48SHORE D 30 SEC, 49-65SHORE D 30 SEC, 65-86

38-46 HRC74-76 HRB

16OZ.DEADBLOWHAMMER(DOESNOTINCLUDEINTERCHANGEABLEFACES)

SF150

HEAD

HEAD DIAMETER

HEAD LENGTH

TOTAL LENGTH

L

in.1 1/2

mm38.1

in.4

mm101.6

lb.1

oz.16

in.11 1/2

mm292.1

gm586

TOTAL

lb.1.29

Steel shot in side head.

Fiberglass handle with rubber grip minimizes

the vibration felt on the hand.

SF150

SF150HK

The dead blow hammer with interchangeable faces is mainly used in the assembly of machinery parts, where it is important that surfaces stricken do not

get damaged.

FIXED FACE DEAD BLOW HAMMER

Indestructible non-slip fiberglass handle with Super Grip.Reinforced faces.

HIGH-IMPACT,FIXEDFACE DEADBLOWHAMMER

1430DBX

HEAD

HEAD DIAMETER

HEAD LENGTH

TOTAL LENGTH

L

in.2

mm50.8

in.5

mm127

lb.2

oz.32

in.13 3/4

mm349.2

gm907

TOTAL

lb.2.0

Non-slip, shock absorbtion handle

Indestructable fiber glass handle

HAMMERS DEAD BLOW HAMMERS

HOLE PUNCH SETS


ALIGNMENT BARS

BALL PEIN HAMMERS

RUBBER MALLETS AND PLASTIC FACE HAMMERSDEAD BLOW

HAMMERS



486

DEAD BLOW IMPACT AND DEAD BLOW SLEDGE HAMMERS

The body is composed of a steel body with two fixed faces made of cellulose acetate, designed for use on metals and other materials susceptible to strike marks or deformations. The deformation is absorbed and occurs on the face, not on the stricken object.

HIGH-IMPACTHAMMER

1434PDB1435PDB

CODE

HEAD

HEAD DIAMETER

HEAD LENGTH

TOTAL LENGTH

L TOTAL

in.1 51/641 51/64

mm45.745.7

in.5 1/85 1/8

mm130.1130.1

lb.1

1.5

oz.1624

in.12 1/412 1/4

mm311.1311.1

gm454680

lb.1.001.50

1435PDB

The high-impact dead blow hammer, in addition to featuring a head filled with steel shot that makes it weigh more, also has a greater contact area, very useful in the assembly of machinery parts requiring great force.

HEAVY-DUTY HIGH-IMPACTHAMMER

1430DB1432DB

CODE

HEAD

HEAD DIAMETER

HEAD LENGTH

TOTAL LENGTH

L TOTAL

in.2

2 3/4

mm50.869.8

in.4 3/84 3/4

mm111.1120.6

lb.23

oz.3248

in.13 3/4

14 11/16

mm349.2373.0

gm9071360

lb.2.003.00

1432DB

• Made of one piece from high-impact polyurethane, resistant to chemicals.

• Head filled with steel shot is heavier.• Does not bounce or give off sparks.

DEADBLOWIMPACTSLEDGEHAMMERS

1435DB1436DB1439DB

CODE FACE DIAMETER

HEAD LENGTH

TOTAL LENGTH

L TOTAL

in.2 9/162 3/43 1/8

mm657080

in.5 7/167 3/32

8

mm138180203

in.15 1/8

2036 1/2”

mm385508927

gm164231755380

lb.3.67.011.9

• Body made of high-impact polyurethane, resistant to chemicals.

• Face and ball made of steel alloy.• Beveled strike face does not produce shrapnel.• Ball machined with accurate radii to deliver

better impacts.• Non-slip handle.• Handle's bottom features wide end cap to

prevent tool from slipping off hands.

DEADBLOWBALLPEINHAMMERS

1326DB1336DB1344DB1348DB

CODE HEAD DIAMETER

HEAD LENGTH

TOTAL LENGTH

L TOTAL

in.1.231.471.681.68

mm31374343

in.4.254.54.884.88

mm108114124124

in.12.75

1313.516.25

mm323330342412

gm737102112471361

oz.26364448

STRIKING TOOLS

1326DB

1439DB

• Does not damage any surfaces.• More resistant to cuts, indentations, and

abrasion than rubber hammers.• Flat faces deliver better strikes.• Non-slip handle.• Handle's bottom features a wide end cap to

prevent the tool from slipping off hands.• Ideal for any type of application.

1435DB

Fiber glass handle with rubber grip minimizes hand vibration

Heads are partially filled with steel shot

Steel shot inside head dissipates vibration


HOLE PUNCH SETS


ALIGNMENT BARS

BALL PEIN HAMMERS

RUBBER MALLETS AND PLASTIC FACE HAMMERSDEAD BLOW

HAMMERS




TOOLSSTRIKING

10

RUBBERHEADMALLET

136613671368

CODE

HEAD

HEAD DIAMETER

HEAD LENGTH

TOTAL LENGTH

L TOTAL

in.1 25/322 3/162 5/8

mm45.255.566.6

in.3 1/163 3/44 1/2

mm77.795.2114.3

lb.0.51

1.4

oz.81622

in.12 1/214 1/2

16 19/32

mm317.5368.3421.8

gm.226454635

lb.0.501.001.40


RUBBER MALLETSMalletswithrubberheadsareidealformechanics,bodyworkers,brassworkersandcarpenters.Veryusefulforstrikinglargepieces

requiringspecialcare.

Oak handle provides excellent impact resistance.

Head made of neoprene rubber that delivers strong blows without

damaging the stricken object.

Cylindrical head delivers greater impact area.

1368

PLASTIC OR RUBBER FACE HAMMERS

1383FV will be included??

Fixedplasticfacehammersareusedforstrikingsoftmaterialsthatdonotrequirealotofforce.

INTERCHANGEABLEFACESFOR HAMMERSSF150AND1364

STANDARD: FEDERAL GGG-H-33b

1364XS1364T

CODE STRIKE TYPE

EXTRA SOFT RUGGED USE

FACE COLOR

DARK GRAYBEIGE

SIZE

1 1/2”1 1/2”

SHORE HARDNESS

6095

STANDARD: FEDERAL GGG-H-33a

HAMMERWITHINTERCHANGEABLE RUBBERFACES

1364

HEAD DIAMETER

HEAD LENGTH

TOTAL LENGTH

L

in.1 1/2

mm38.1

in.3 3/8

mm85.7

in. 12

mm304.8

gm385

TOTAL

lb.0.85

These faces can be used on hammers SF150 and 1364

1364XS 1364TExtra softgray face

Rugged use beige face

1364

FACTSHEETFOR1383HAMMERSWITHPLASTICFACES

FEDERALSTANDARD GGG-H-33a CHARACTERISTICS

1383

CODE

78

SHORE

HARDNESS A

25 13 360

STRIKE TYPE

PLASTIC FACES

HEAD OZ. HEAD gm.

FACTSHEETFOR1383FVHAMMERSWITHPLASTICFACES

FEDERALSTANDARD GGG-H-33a CHARACTERISTICS

1383

CODE

78

SHORE

HARDNESS A

25 13 360

STRIKE TYPE

PLASTIC FACES

HEAD OZ. HEAD gm.

Resistant plastic faces prevent hammer from

bouncing.

Plastic face with 95° Shore hardness for solid strikes.

Center cast in Zamak for solid impacts.

Plastic face with 60° Shore hardness for soft strikes.

Compact oak handle offers excellent

impact resistance.

1383

HAMMERWITHFIXEDPLASTICFACES

1383

HEAD DIAMETER

HEAD LENGTH

TOTAL LENGTH

L

in.1 5/6

mm33.3

in.3 15/32

mm88.1

in. 12

mm304.8

gm360

TOTAL

lb.0.79


HAMMERWITHFIXEDPLASTICFACESFIBBERGLASSHANDLE

1383FV

HEAD DIAMETER

HEAD LENGTH

TOTAL LENGTH

L

in.1 5/6

mm33.3

in.3 15/32

mm88.1

in. 12

mm304.8

gm350

TOTAL

lb.0.77


STRIKING TOOLS


HOLE PUNCH SETS


ALIGNMENT BARS

BALL PEIN HAMMERSRUBBER MALLETS AND

PLASTIC FACE HAMMERS

Resistant plastic faces prevent hammer

bouncing.

Lower vibration through hand and arm.

Fiberglass handle, rubber covered.



488

BALL PEIN HAMMERSBallpeinhammersallowyoutoworkonrivetsandmetalsurfaces.

POLISHEDBALLPEINHEAD WITHFIBERGLASSHANDLE

1308FV1312FV1316FV1324FV1332FV1340FV

CODE

HEAD

TENSION RESISTANCE

ASME B107.53MLB-INCH

TOTAL LENGTH

L TOTAL

STANDARDS: FEDERAL:GGG-H-86C, ASME B107.53M NMX-O-103

in.11 1/412 1/2 12 1/2 14 1/414 1/4 15 3/4

mm286318318362362400

gm38454866297011971508

lbf150015002250225022502250

oz.81216243240

gm2273404546809071134

lb.0.841.211.462.142.643.32

BALLPEINHAMMERSFACTSHEET

ASMEB107.53MSTANDARD

CODE HARDNESSORC

TENSIONLBF

FLEXIONLBF

STRIKE

1308FV1312FV1316FV1324FV1332FV1340FV

45-6045-6045-6045-6045-6045-60

400400400100010001000

406080150150175

202020202020

POLISHEDBALLPEINHEAD WITHAMERICANHICKORYHANDLE

1308P1312P1316P1324P1332P1340P1348P

CODE

HEAD

TENSION RESISTANCE


TOTAL LENGTH

L TOTAL

STANDARDS: FEDERAL:GGG-H-86C, ASME B107.53, NMX-O-103

in.12 3/8

1414

16 1/416 1/4

1818

mm314356356413413454454

gm333522636912113914021629

lbf3800380042004200420042004200

oz.8121624324048

gm22734045468090711341361

lb.0.731.151.402.012.513.093.59



CODE HARDNESSORC

TENSIONLBF

FLEXIONLBF

STRIKE

1308P1312P1316P1324P1332P1340P1348P

45-6045-6045-6045-6045-6045-6045-60

75075022502250225022502250

406080150150175175

20202020202020

STRIKING TOOLS

Epoxy resin connection

guarantees secure hafting.

American Hickory handle, polished and

lacquered.

Forged and tempered steel alloy head,

polished and varnished.

1340FV 1332P

AMERICAN

HICKORY

1332FVS

Fiberglass handle with rubber grip minimizes the

vibration felt on the hand.

BLACKBALLPEINHAMMER WITHFIBBERGLASSHANDLE

1332FVS1324FVS

CODE

HEAD

TENSION RESISTANCE


TOTAL LENGTH

L TOTAL

STANDARDS: FEDERAL: GGG-H-86C, ASME B107.53, NMX-O-103

in.7 7/87 7/8

mm200200

gm11651010

lbf22502250

oz.3224

gm907680

lb.2.562.26


HOLE PUNCH SETS


ALIGNMENT BARS

BALL PEIN HAMMERS

RUBBER MALLETS AND PLASTIC FACE HAMMERS BALL PEIN

HAMMERS




TOOLSSTRIKING

10



CODE HARDNESSORC

TENSIONLBF

FLEXIONLBF

STRIKE

1308PN1312PN1316PN1324PN1332PN1340PN1348PN

45-6045-6045-6045-6045-6045-6045-60

75075022502250225022502250

406080150150175175

20202020202020

BLACKBALLPEINHAMMER

1308PN1312PN1316PN1324PN1332PN1340PN1348PN

CODE

HEAD

TENSION RESISTANCE


TOTAL LENGTH

L TOTAL

STANDARDS: FEDERAL:GGG-H-86C, ASME B107.53, NMX-O-103

in.12 3/8

1414

16 1416 1/4

1717

mm314356356413413432432

gm333522636912113914021629

lbf3800380042004200420042004200

oz.8

121624324048

gm227340454680907

11341361

lb.0.731.151.402.012.513.093.59

STRIKING TOOLS

Oak handle offers excellent impact

resistance.

Double heat-treated forged steel head. Hafted with metal and wood wedges to lock head and handle together.

Phosphatized head prevents corrosion.

1324PN



CODE HARDNESSORC

TENSIONLBF

FLEXIONLBF

STRIKE

1324E1332E

45-6045-60

10001000

150175

2020

BLACKBALLPEINHAMMER WITHERGONOMICHANDLE

1324E1332E

CODE

HEAD

TENSION RESISTANCE


TOTAL LENGTH

L TOTAL

STANDARDS: FEDERAL: GGG-H-86C, ASME B107.53, NMX-O-103

in.16 1/416 1/4

mm413413

gm 9121139

lbf42004200

oz.2432

gm680907

lb.2.012.51

Ergonomic oak handle prevents slippage.

Forged steel alloy head, quenched and tempered,

blued finish.49 to 55 HRc hardness

on striking faces. Tempered eye.

1332E

CAB3UH

SPAREAMERICANHICKORYHANDLE FORBALLPEINHAMMERS

CAB1UHCAB2UHCAB3UHCAB4UH

CODE TOTAL LENGTH

L

HAMMERSin.12141618

mm305356406457

gm108130214266

TOTAL

lb.0.240.340.470.59

8 oz.12 & 16 oz.24 & 32 oz.40 & 48 oz.

SPAREOAKERGONOMICHANDLE1324EAND1332E

TOTAL LENGTH

L

HAMMERSin.16

mm406

gm200

TOTAL

lb.0.4 24 & 32 oz.

CAB6U

AMERICAN

HICKORY

Includes wood and metal wedges.

CAB6U

Includes wood and metal wedges.

Oak handle.

American Hickory handle.


HOLE PUNCH SETS


ALIGNMENT BARS

BALL PEIN HAMMERS


HAMMERS



490

STRIKING TOOLS

BODYWORK HAMMERSBodyworkhammersareusedtorepaircardents.Theirheadsfeatureradiiandgeometriesthatmaketheheadsfitverywellinthevariousshapesfoundinbodywork.

Square and round face hammer, quenched and tempered with 43-45 °RC. Smooths damaged metallic surfaces, especially corner areas.

SQUAREANDROUNDFACE HAMMER

1424

HEAD DIAMETER

HEAD LENGTH

mm31.7

in.4

mm101.6

in.1 1/4

gm350

TOTAL LENGTH

L

in. 13

mm330.2

lb.0.77

STANDARDS: FEDERAL GGG-H-20A, ASME B107.56

Hammer with round face and flat tip for finishes on edges and molds.

FLATTIPANDROUNDFACE HAMMER

1427

HEAD DIAMETER

HEAD LENGTH

mm34.9

in.4 1/2

mm114.3

in.1 3/8

gm322

TOTAL LENGTH

L

in. 12 1/4

mm311.15

lb.0.71


BLUNTPOINTANDROUNDFACE HAMMER

1428

HEAD DIAMETER

HEAD LENGTH

mm38.1

in.5 7/8

mm149.2

in.1 1/2

gm326

TOTAL LENGTH

L

in. 14

mm355.6

lb.0.72


Blunt point and round face hammer for smoothing out dents in metal sheets and deep areas.

BODYWORKHAMMER WITHTWOFACES

1421

FACE DIAMETER

HEAD LENGTH

mm31.7

in. 6

mm152.4

in.1 5/8

mm41.2

in.1 1/4

gm515

TOTAL LENGTH

L

in. 13 3/4

mm349.2

FACE DIAMETER

lb.1.14


BODYWORKHAMMERSFACTSHEET

ASMEB107.56STANDARD CHARACTERISTICS

CODE HARDNESSORC

TENSIONLBF

FLEXIONLBF

STRIKE

HEAD OZ. HEAD gm1421142414271428

45-6025-3025-3025-30

400400400400

256080150

20202020

13161616

368453453453

142814241427

Bodywork hammer with two round, flat faces. Features double heat-treated, steel alloy forged head. This hammer is ideal

for work on dents, wrinkles, undulations, and other bodywork damage.

Impact-resistant oak handle.

Also called a dingingor engravers hammer

These are also calledfinishing hammers

Also calleda dinging hammer

1421


HOLE PUNCH SETS


ALIGNMENT BARS

BALL PEIN HAMMERS


HAMMERS




TOOLSSTRIKING

10

STRIKING TOOLS

HOLLOW PUNCH SETS Hollowpunchsetsareusedtocutoutroundsectionsondifferentmaterials.Theirapplicationsareverydiverse.Forexample,theycanbe

usedtomakesealsforautomobilecrankcases,forhydraulicortoiletinstallations,etc.Thematerialsitcancutarepolyurethanefoam,rubber,cardboard,leather,andjointmaterials.

49902

49900

They are manufactured with high-carbon steel, with a 53 to 66 °RC hardness. Handles made of impact-resistant steel alloy. Polypropylene case.

This system was made so 2 or more hollow punches can be used at the same time.

It is used to cut out round shapes and rings to make foam, cardboard, leather,

rubber, fiber, plastic and lead seals, among other possible

materials.

1/8”TO2”INPLASTICCASE

49902

DESCRIPTION ACCESSORIES

TOTAL

in.1/8, 3/16, 1/4, 5/16, 3/8,7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4, 1 5/16, 1 3/81 7/16, 1 1/2, 1 5/8, 1 11/16, 1 3/4, 1 7/8, 2

gm2748Handle

adapterPlastic case

lb.6.06

27-PIECE SET

49901

1/8”TO3/4”INPLASTICCASE

49901


TOTAL

in.1/8, 3/16, 1/4, 5/16, 3/8 7/16, 1/2, 9/16, 5/8, 3/4

gm598Handle

Plastic case

lb.1.32

11-PIECE SET

1/8”TO13/16”INPLASTICCASE

49900


TOTAL

in.1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1 , 1 1/16, 1 1/8, 1 3/16

gm1120Handle

Plastic case

lb.2.47

16-PIECE SET49900M

3TO30MMINPLASTICCASE

49900M


TOTAL mm

3 mm, 4 mm, 6 mm,8 mm, 10 mm, 12 mm,14 mm, 16 mm, 18 mm, 20 mm, 22 mm, 24 mm, 26 mm, 28 mm, 30 mm.

gm1120Handle

Plastic case

lb.2.47

16-PIECE SET


HOLE PUNCH SETS


ALIGNMENT BARS

BALL PEIN HAMMERS

RUBBER MALLETS AND PLASTIC FACE HAMMERS HOLE PUNCH

SETS



492

50900

FORSHEETMETAL,5/8”TO11/14” INPLASTICCASE

50900

STRIKING PUNCH

Øin.5/83/41

1 1/4

gm800

lb.1.76

WEIGHT

OPENING MATRIX

in.9/1619/3251/641 1/32

SCREWS

in.5/1625/6415/32

mm81012

mm1619

25.432

in.1

1 1/21 3/4

mm25.438.144.4

in.1/2

39/5914/19

mm131719

L THREAD OPENINGØ

7-PIECE SET

For medium steel and aluminum sheet metal, 10 gauge (3.5 mm)

STRIKING TOOLS

BRONZE DRIFT PUNCHESDriftpunchesareusedtoinstallorremovepins and rivets. Their length depends on thejobathand.Straightpunchescanalsobe used to align holes when assemblingparts.

End designed to withstand strikes.

Designed to prevent any damage of the stricken

object.

Does not strip or deform.

Knurled grasping area for a better grip.

BRONZEDRIFTPINS

49903 3-PIECE SET

DESCRIPTION

3/8”, 1/2”, 3/4” POUCHgm793

ACCESSORIES

TOTALlb.

1.75

49920

49903

BRONZEDRIFTPUNCHES

TIP DIAMETER

B

LENGTHL

TOTAL

4992049922

in.1/23/4

mm12.719.0

in.1/23/4

mm12.719.0

in.78

mm1720

gm.190485

SHAFT DIAMETER

B

CODE

lb.0.421.07

Saves time in perforation, serration, filing and manual adjustments.

Make burr-free, clean holes to install conduit pipes, controls, instruments and for sheet metal boxes.

Easy to use tools.Can be operated with a common wrench.

Assortment of hole punches for different hole sizes.

SHEET METAL HOLE PUNCH SETS


HOLE PUNCH SETS


ALIGNMENT BARS

BALL PEIN HAMMERS

RUBBER MALLETS AND PLASTIC FACE HAMMERS HOLE PUNCH

SETSCHISELS, PUNCHES

& DRIFT PINS




TOOLSSTRIKING

10

STRIKING TOOLS

DRIFTPINS,PUNCHES,ANDCHISELS

NO.46 26-PIECE SET

CODE SIZE

41-3/841-1/244-5/16

47-1/4X3/3247-5/16X1/847-5/16X5/3247-3/8X3/1647-7/16X7/3247-1/2X1/4

50-1/450-5/1650-3/850-7/1650-1/2

86A-3/1686A-1/486A-5/1686A-7/1686A-1/286A-5/886A-3/4X886A-7/8X886A-1X8

96-5/1696-3/896-1/2

E516

3/8 x 1/81/2 x 3/165/16 x 7/64

1/4 x 3/325/16 x 1/85/16 x 5/323/8 x 3/167/16 x 7/32

1/2 x 1/4

1/4 x 3/325/16 x 1/83/8 x 3/167/16 x 7/32

1/2 x 1/4

1/4 x 3/161/4 x 1/4

5/16 x 5/167/16 x 7/16

1/2 x 1/25/8 x 5/83/4 x 3/47/8 x 1

1 x 1 3/16

5/16 x 1/83/8 x 3/161/2 x 1/4

Pouch

9.5 x 3.212.7 x 4.87.9 x 2.8

6.4 x 2.47.9 x 3.27.9 x 4.09.5 x 4.811.1 x 5.612.7 x 6.4

6.4 x 2.47.9 x 3.29.5 x 4.811.1 x 5.612.7 x 6.4

6.4 x 4.86.4 x 6.47.9 x 7.9

11.1 x 11.112.7 x 12.7 15.9 x 15.919.1 x 19.122.2 x 25.425.4 x 30.2

7.9 x 3.29.5 x 4.812.7 x 6.4

in. mm

DRIFTPINSANDPUNCHES

NO.6 16-PIECE SET

CODE SIZE

47-1/4X3/3247-5/16X1/847-5/16X5/3247-3/8X3/1647-1/2X1/4

50-1/450-1/450-5/1650-3/850-7/1650-1/2

96-3/896-1/2

41-3/841-1/244-3/8

E514

1/4 x 3/325/16 x 1/85/16 x 5/323/8 x 3/161/2 x 1/4

1/4 x 1/161/4 x 3/325/16 x 1/83/8 x 3/167/16 x 7/321/2 x 1/4

3/8 x 3/161/2 x 1/4

3/8 x 1/81/2 x 3/163/8 x 5/32

Pouch

6.4 x 2.47.9 x 3.27.9 x 4.09.5 x 4.812.7 x 6.4

6.4 x 1.66.4 x 2.47.9 x 3.29.5 x 4.811.1 x 5.612.7 x 6.4

9.5 x 4.812.7 x 6.4

9.5 x 3.212.7 x 4.89.5 x 4.0

in. mm

DRIFTPINS,PUNCHESANDCHISELS

NO.5 12-PIECE SET

CODE SIZE

47-1/4X3/3247-5/16X1/847-5/16X5/3247-3/8X3/16

50-5/1650-3/8

96-3/4

41-3/8

86A-3/1686A-5/1686A-7/1686A-1/2

E519

1/4 x 3/325/16 x 1/85/16 x 5/323/8 x 3/16

5/16 x 1/83/8 x 3/16

3/4 x 3/8

3/8 x 1/8

1/4 x 3/165/16 x 5/167/16 x 7/161/2 x 1/2

Pouch

6.4 x 2.47.9 x 3.27.9 x 4.09.5 x 4.8

7.9 x 3.29.5 x 4.8

19.1 x 9.5

9.5 x 3.2

6.4 x 4.87.9 x 7.9

11.1 x 11.112.7 x 12.7

in. mm

Combinationsetsmakeanexpert'sworkeasier.Manufacturedwithtempered,micro-alloysteel.Hexagonalbodydesign.

COMBINATION SETS OF

CHISELS, PUNCHES AND DRIFT PINS

NO.46 NO.6 NO.5


HOLE PUNCH SETS


ALIGNMENT BARS

BALL PEIN HAMMERS

RUBBER MALLETS AND PLASTIC FACE HAMMERS CHISELS, PUNCHES

& DRIFT PINS



494

STRIKING TOOLS

CHISELS,DRIFTPINSANDPUNCHES

NO.2 10-PIECE SET

CODE SIZE

41-3/8

47-1/4X3/32

47-5/16X1/8

47-3/8X3/16

50-3/16

50-5/16

50-3/8

86A-1/4

86A-3/8

86A-7/16

E307

3/8 x 1/8

1/4 x 3/32

5/16 x 1/8

3/8 x 3/16

1/4 x 1/16

5/16 x 1/8

3/8 x 3/16

1/4 x 1/4

3/8 x 3/8

7/16 x 7/16

Pouch

9.5 x 3.2

6.4 x 2.4

7.9 x 3.2

9.5 x 4.8

6.4 x 1.6

7.9 x 3.2

9.5 x 4.8

6.4 x 6.4

9.5 x 9.5

11.1 x 11.1

in. mm


NO.4 5-PIECE SET

CODE SIZE

47-5/16X5/32

50-3/8

41-3/8

86A-7/1686A-1/2

E518

5/16 x 5/32

3/8 x 3/16

3/8 x 1/8

7/16 x 7/161/2 x 1/2

Pouch

7.9 x 4.2

9.5 x 4.8

9.5 x 3.2

11.1 x 11.112.7 x 12.7

in. mm


NO.3 5-PIECE SET

CODE SIZE

41-3/8

47-5/16X1/847-3/8X3/16

50-5/16

86A-1/2

E300

3/8 x 1/8

5/16 x 1/83/8 x 3/16

5/16 x 1/8

1/2 x 1/2

Pouch

9.5 x 3.2

7.9 x 3.29.5 x 4.8

7.9 x 3.2

12.7 x 12.7

in. mm

NO.2 NO.4 NO.3

COMBINATION SETS OF

CHISELS, PUNCHES, DRIFT AND PINS


HOLE PUNCH SETS


ALIGNMENT BARS

BALL PEIN HAMMERS


& DRIFT PINS




TOOLSSTRIKING

10

STRIKING TOOLS

EXTRALONGPINPUNCHES

48A 5-PIECE SET

48-3/8X5/3248-3/8X3/1648-7/16X7/3248-1/2X1/448-1/2X5/16

E517

3/8 x 5/323/8 x 3/167/16 x 7/321/2 x 1/41/2 x 5/16

Pouch

9.5 x 4.09.5 x 4.811.1 x 5.612.7 x 6.412.7 x 7.9

CODE SIZEin. mm

SHORTDRIFTPUNCHES

50A 6-PIECE SET

50-3/1650-1/450-5/1650-3/850-7/1650-1/2E515

1/4 x 1/161/4 x 3/325/16 x 1/83/8 x 3/167/16 x 7/321/2 x 1/4

Pouch

6.4 x 1.66.4 x 2.47.9 x 3.29.5 x 4.811.1 x 5.612.7 x 6.4

CODE SIZEin. mm

50A 48A

LONGDRIFTPUNCHES

96A 7-PIECE SET

96-1/496-5/1696-3/896-7/1696-1/296-5/896-3/4

E303

1/4 x 3/325/16 x 1/83/8 x 3/167/16 x 7/321/2 x 1/45/8 x 5/163/4 x 3/8

Pouch

6.4 x 2.47.9 x 3.29.5 x 4.811.1 x 5.612.7 x 6.415.9 x 7.919.1 x 9.5

CODE SIZEin. mm

STRAIGHTPINPUNCHES

47A 7-PIECE SET

47-1/4X1/1647-1/4X3/3247-5/16X1/847-5/16X5/3247-3/8X3/1647-7/16X7/3247-1/2X1/4

E307

1/4 x 1/161/4 x 3/325/16 x 1/85/16 x 5/323/8 x 3/167/16 x 7/32

1/2 x 1/4

Pouch

6.4 x 1.66.4 x 2.47.9 x 3.27.9 x 4.09.5 x 4.811.1 x 5.612.7 x 6.4

CODE SIZEin. mm

PUNCHES AND DRIFT PINSDriftpinsareusedtoinstallorremoveguidebushings,pins,andcenterguides.Theirlengthisimportantanditdependsonthejob.Straightpinscanalsobeusedtoalignholeswhenassembling parts.

The tool's butt end is designed to withstand strikes.

Made with micro-alloy steel for greater resistance.

Tapered tip, ideal for installing or removing pins and center

guides in deep holes.

Straight tip, ideal for installing or removing guide bushings when

die-cutting.

47A

96A


HOLE PUNCH SETS


ALIGNMENT BARS

BALL PEIN HAMMERS


& DRIFT PINS



496

STRIKING TOOLS

LONGDRIFTPUNCHES

99B 5-PIECE SET

96-5/1696-3/896-7/1696-1/296-5/8

E517

5/16 x 1/83/8 x 3/167/16 x 7/32

1/2 x 1/45/8 x 5/16

Pouch

7.9 x 3.29.5 x 4.811.1 x 5.612.7 x 6.415.9 x 7.9

CODE SIZEin. mm

99B

STRAIGHTPINPUNCHES

47-1/4X1/1647-1/4X3/3247-5/16X1/847-5/16X5/3247-3/8X3/1647-7/16X7/3247-1/2X1/4

LENGTHL TOTAL

in.1/163/321/85/323/167/321/4

mm1.62.93.24.04.85.66.4

in.4 3/84 3/45 1/45 5/86 1/86 1/26 3/4

mm111.1120.7133.4142.9155.6165.1171.5

gm242840456849127

BCODE

in.1/41/4

5/165/163/8

7/161/2

mm6.46.48.08.09.511.112.7

A

lb.0.050.060.090.100.150.110.28

STANDARDS: FEDERAL GGG-P-831F ASME B107.48M

STRAIGHTPINPUNCHESFACTSHEET

ANSI209.2

CODE CUT AREA HARDNESS ORC

IMPACTHEIGHT/INCH

STRIKING AREA HARDNESS ORC

IMPACTWEIGHT/LB

47-1/4X1/1647-1/4X 3/3247-5/16X1/847-5/16X5/3247-3/8X 3/1647-7/16X7/3247-1/2X 1/4

53-6053-6053-6053-6053-6053-6053-60

571010203025

45 max.45 max.45 max.45 max.45 max.45 max.45 max.

11

2 1/2”55510

To install or remove guide bushings when die-cutting. To install or remove pins and center guides, and in the alignment of pins that center two or more pieces. The tool's butt end is designed to withstand strikes.

48-3/8 x 3/16

47-1/2 x 1/4

8”EXTRALONGSTRAIGHTPINPUNCHES

48-3/8X5/3248-3/8X3/1648-7/16X7/3248-1/2X1/448-1/2X5/16

LENGTHL TOTAL

A BCODE

in.3/83/87/161/21/2

mm9.59.511.112.712.7

in.5/323/167/321/45/16

mm4.04.85.66.37.9

in.88888

mm203203203203203

gm388357617826830

lb.0.850.781.361.821.83



HOLE PUNCH SETS


ALIGNMENT BARS

BALL PEIN HAMMERS


& DRIFT PINS




TOOLSSTRIKING

10

STRIKING TOOLS

LONGTAPEREDDRIFTPUNCHES

96-1/496-5/1696-3/896-7/1696-1/296-5/896-3/4

LENGTHL TOTAL

CODE B

in.3/321/83/167/321/45/163/4

mm2.23.24.85.66.47.919.0

A

in.1/45/163/87/161/25/83/8

mm6.37.99.511.112.715.89.5

in.10101010101010

mm254.0254.0254.0254.0254.0254.0254.0

gm5280117172224354503

lb.0.110.180.260.380.490.781.11


LONGTAPEREDDRIFTPUNCHESFACTSHEET

ASMEB107.48M


IMPACTHEIGHT/INCH


IMPACTWEIGHT/LB

96-1/496-5/1696-3/896-7/1696-1/296-5/896-3/4

53-6053-6053-6053-6053-6053-6053-60

202020SESESESE

45 max.45 max.45 max.45 max.45 max.45 max.45 max.

51010SESESESE

SHORTTAPEREDDRIFTPUNCHESFACTSHEET

ASMEB107.48M


IMPACTHEIGHT/INCH


IMPACTWEIGHT/LB

50-3/1650-1/450-5/1650-3/850-7/1650-1/2

53-6053-6053-6053-6053-6053-60

20202020SESE

45 max.45 max.45 max.45 max.45 max.45 max.

551010SESE

To install or remove guide bushings when die-cutting. To install or remove pins and center guides in deep holes, and in the alignment of pins that center two or more pieces.The tool's butt end is designed to with stand strikes.

SHORTTAPEREDDRIFTPUNCHES

50-3/1650-1/450-5/1650-3/850-7/1650-1/2

LENGTHL TOTAL

BACODE

in.1/163/321/83/167/321/4

mm1.62.43.24.85.66.4

in.1/41/4

5/163/8

7/161/2

mm6.46.48.09.511.112.7

in.4 1/84 5/85 1/85 5/8

66 1/2

mm104.7117.4130.1142.8152.4165.1

gm21244275112153

lb.0.050.050.090.170.250.34


50-5/16 96-1/2

PUNCHES AND DRIFT PINS


HOLE PUNCH SETS


ALIGNMENT BARS

BALL PEIN HAMMERS


& DRIFT PINS



498

STRIKING TOOLS

CENTER AND PRICK PUNCHES50°centerpunchesareusedtomarkpiecesinmanufacturingorassembly.90°prickpunchesareusedtocentertheborepointandpreventtips from slipping off.

PRICKANDDRILLPUNCHES

41A 5-PIECE SET

41-1/441-5/1641-3/841-1/241-5/8

E518

1/4 x 5/645/16 x 3/323/8 x 1/81/2 x 3/165/8 x 5/16

Pouch

6.4 x 2.07.9 x 2.49.5 x 3.212.7 x 4.815.9 x 7.9

CODE SIZEin. mm

STANDARDS: FEDERAL GGG-P-831F, ASME B107.48M

50˚PRICKPUNCHES

LENGTHL TOTAL

44-1/444-5/1644-3/844-7/1644-1/244-5/8

CODE B

in.3/327/643/8

7/32"1/4"3/8"

mm2.32.79.55.56.49.5

A

in.1/45/163/8

7/16"1/2"5/8"

mm6.47.99.511.112.715.8

in.4 3/4

55 1/45 5/8"

6"6 7/8"

mm120.6127.0133.3142.8152.4174.6

gm25457095196400

lb.0.060.100.150.200.430.88

500

For tracing on metal plates or sheet metal; to mark or punch guide holes; to place self-threading screws.

CENTERPUNCHESFACTSHEET

ANSI209.1


IMPACTHEIGHT/IN.


IMPACTWEIGHT/LB

41-1/441-5/1641-3/841-7/1641-1/241-5/8

48-6048-6048-6048-6048-6048-60

151515151515


555555

Useful for initiating holes. The tool's butt end is designed to withstand strikes.

PRICKPUNCHESFACTSHEET

ANSI209.1


IMPACTHEIGHT/IN.


IMPACTWEIGHT/LB

44-1/444-5/1644-3/844-7/1644-1/244-5/8

48-6048-6048-6048-6048-6048-60

151515151515


555555

41A

41 - 1/2 44 - 3/8

The tool's butt end is designed to withstand

strikes.

FOR CENTERINGOR MARKING

900

500FOR PRICKINGOR DRILLING


90˚CENTERPUNCHES

LENGTHL TOTAL

41-1/441-5/1641-3/841-7/1641-1/241-5/8

in.4 1/44 5/84 7/85 1/45 5/86 1/4

mm107.9117.4123.8133.3142.8158.7

gm24396287163222

CODE

in.5/643/321/85/323/165/8

mm2.02.43.24.04.815.8

B

in.1/45/163/87/161/25/16

mm6.47.99.511.112.77.9

A

lb.0.050.090.140.190.360.49

900


HOLE PUNCH SETS


ALIGNMENT BARS

BALL PEIN HAMMERS


& DRIFT PINS




TOOLSSTRIKING

10

STRIKING TOOLS

Designedtoremove,cutorbreakmaterialswithahardnesssofterthanthechisel's,suchasconcrete,rock,slag,brass,untreatedsteel,nuts,bolts,pins,etc.Itiswidelyusedintheconstructionindustry,aswellasintheinstallationandmaintenanceoffixedequipmentandpipinginthechemicalandfoodindustries.Thetip'swidthdictatesthechisel'suses,dependingontheaccuracyorbruteforcerequired.

CHISELS

The tool's butt end is designed to withstand

strikes.

Made with micro-alloy steel for greater resistance.

Designed to remove cold materials like iron, brass, bronze and steel.

Tip wider than body

CHISELSET

86D 10-PIECE SET

86A-3/1686A-1/486A-5/1686A-3/886A-7/1686A-1/286A-5/886A-3/4X886A-7/8X886A-1X8

E513

1/4 x 3/161/4 x 1/4

5/16 x 5/163/8 x 3/8

7/16 x 7/161/2 x 1/25/8 x 5/83/4 x 3/47/8 x 1

1 x 1 3/16

Pouch

6.4 x 4.86.4 x 6.47.9 x 7.99.5 x 9.5

11.1 x 11.112.7 x 12.715.9 x 15.919.1 x 19.122.2 x 25.425.4 x 30.2

CODE SIZEin. mm

CHISELSET

86B 7-PIECE SET

86A-1/486A-5/1686A-3/886A-7/1686A-1/286A-5/886A-3/4X8

E303

1/4 x 1/45/16 x 5/16

3/8 x 3/87/16 x 7/16

1/2 x 1/25/8 x 5/83/4 x 3/4

Pouch

6.4 x 6.47.9 x 7.99.5 x 9.5

11.1 x 11.112.7 x 12.715.9 x 15.919.1 x 19.1

CODE SIZEin. mm

CHISELSET

86A 5-PIECE SET

86A-5/1686A-7/1686A-1/286A-5/886A-3/4X8

E520

5/16 x 5/167/16 x 7/161/2 x 1/25/8 x 5/83/4 x 3/4"

Pouch

7.9 x 7.911.1 x 11.112.7 x 12.715.9 x 15.919.1 x 19.1

CODE SIZEin. mm

86D

86B 86C 86A

CHISELSET

86C 5-PIECE SET

86A-1/486A-5/1686A-3/886A-7/1686A-1/2

E520

1/4 x 1/45/16 x 5/163/8 x 3/8

7/16 x 7/161/2 x 1/2

Pouch

6.4 x 6.47.9 x 7.99.5 x 9.5

11.1 x 11.112.7 x 12.7

CODE SIZEin. mm


HOLE PUNCH SETS


ALIGNMENT BARS

BALL PEIN HAMMERS


& DRIFT PINS



500

STRIKING TOOLS

CHISELS

86A-1/2 76-3/8 72-3/8


COLDCUTCHISELS

LENGTHL

TOTAL

86A-3/1686A-1/486A-5/1686A-3/886A-7/1686A-1/286A-5/886A-3/4X886A-3/4X1286A-7/8X886A-7/8X1286A-1X886A-1X12

TIP SIZE

A

BODY SIZE

B

CODE

in.1/45/163/87/161/25/83/47/87/811

1 3/16 1

mm6.47.99.511.112.715.919.022.222.225.425.430.2 25.4

in.3/161/45/163/87/161/25/83/43/47/87/811

mm4,86.47.99.511.112.715.919.019.020.620.625.425.4

in.4 7/85 1/85 3/85 1/2

66 5/8

7812812

8 1/4 12

mm123.8130.2136.5139.7152.4168.3177.8203.2304.8203.2304.8209.5 304.8

gm17325178114165270469695500773670 1085

lb.0.040.070.110.170.250.360.601.031.531.101.701.48 2.39

STANDARDS: FEDERAL GGG-P-831C, ASME B107.48M

DIAMONDTIPCHISELS

LENGTHL

TOTAL

76-1/476-5/1676-3/876-1/276-5/8

TIP SIZE

A

BODY SIZE

B

CODE

in.5/323/161/45/165/8

mm4.04.86.47.915.9

in.1/45/163/81/23/8

mm6.47.99.512.79.5

in.4 1/2

55 5/8

6 6 1/2

mm114.3127.0142.9152.4165.1

gm345996183309

lb.0.070.130.210.400.68

COLDCUTCHISELSFACTSHEET

ASMEB107.47M


IMPACTHEIGHT/INCH


86A-3/1686A-1/4

86A-5/1686A-3/8

86A-7/1686A-1/286A-5/8

86A-3/4X886A-3/4X1286A-7/8X8

86A-7/8X1286A-1X8

86A-1X12

45-6045-6045-6045-6045-6045-6045-6045-6045-6045-6045-6045-6045-60

66620202030303030303030

45 max.45 max.45 max.45 max.45 max.45 max.45 max.45 max.45 max.45 max.45 max.45 max.45 max.

DIAMONDTIPCHISELFACTSHEET

ASMEB107.47M


IMPACTHEIGHT/INCH


76A-1/476A-5/1676A-3/876A-1/276A-5/8

53-6053-6053-6053-60 53-60

6662020

45 max.45 max.45 max.45 max.45 max.

Designed to make V-shaped cuts and to clean interior corners.

For removing, cutting or breaking materials with a hardness lower than the chisel's. Designed to remove cold materials like iron, brass, bronze and steel. The tool's butt end is designed to withstand strikes.

Designed for cutting plumbing and make slits on metals.

CAPECHISELS

LENGTHL

TOTAL

TIP SIZE

A

BODY SIZE

B

CODE

72-1/472-5/1672-3/8

in.11/6413/641/4

mm4.45.26.4

in.1/45/163/8

mm6.47.99.5

in.4 5/85 1/85 1/2

mm117.5130.2139.7

gm284668

lb.0.060.100.15

STANDARD: FEDERAL GGG-C-313C


HOLE PUNCH SETS


ALIGNMENT BARS

BALL PEIN HAMMERS


& DRIFT PINS




TOOLSSTRIKING

10

PUNCH AND CHISEL HOLDERS Reducestheriskofhandinjury.Idealforholdingpunchesandchiselsupto1inchindiameter.

PUNCHANDCHISELHOLDER

2108

2108

CODE

gm275

lb.0.605

SHAFT DIAMETER

mm9.5

in.3/8

TOTAL LENGTH

mm215.9

in.8 1/2

SQUAREPUNCHANDCHISELHOLDER

2108A

2108A

CODE

gm275

lb.0.605

SHAFT DIAMETER

mm9.5

in.3/8

TOTAL LENGTH

mm215.9

in.8 1/2

High-resistance ergonomic plastic

handle.

Chrome-vanadium steel

shaft.

Blued coating.

Up to 1" holding

capacity.

STRIKING TOOLS

2108

Up to 1" holding

capacity.

2108A


HOLE PUNCH SETS


ALIGNMENT BARS

BALL PEIN HAMMERS


& DRIFT PINS



502

SPRING-LOADED PUNCH SETApplyupto3,500PSIforce.Theusercaneasilycontroltheamountofforceappliedbyadjustingthespring'stension.Thishighlyaccuratetooloffersgreatcontrol.Idealforworkintightareasoronjobsrequiringgreatprecision.

SPRING-LOADEDLETTERAND NUMBERPUNCHSET

42AZ09 37-PIECE SET

DESCRIPTION

TOTAL

26 Letters, A to Z10 numbers, 0 to 9Spring-loaded punchPlastic case

gm480

lb.1.06

42AZ09

STRIKING TOOLS

LEADERSHIPINDISPUTABLE QUALITY

The quality of URREA tools exceeds

international manufacturing

standards (ISO, ANSI, ASME, SAE,

GSA, DIN, DGN, EMA, ANCE, VDE).

When buying a URREA tool you are

purchasing from the best tools in

the world.


(800) 366-6911


HOLE PUNCH SETS


ALIGNMENT BARS

BALL PEIN HAMMERS


& DRIFT PINS




TOOLSSTRIKING

10

ALIGNMENT BARS Thereisagreatvarietyofalignmentbarsfordifferentpurposes.Theycanbeusedtoalign,adjust,moveordisassemblemetalorwood

pieces.

Great tool for creating leverage, for aligning or for positioning mechanical parts or pipe flanges.

STRIKING TOOLS

2125

The angled chisel tip allows greater leverage when used to remove wooden seals or machinery

elements.

The flat tip is used mainly for aligning.

Useful for prying

HEADALIGNMENTPRYBARSWITH TURNINGHEAD

21262130

CODE LENGTHL TOTAL

in.1/25/8

in.16 1/2

18

gm419702

DISTANCE BETWEEN HEXAGON PLANES

B

lb.0.921.55

L

B

mm12.715.9

mm419.1457.2

ALIGNMENTBARS

2116212021242125

CODE LENGTHL

TOTAL


B

in.1/25/83/47/8

mm12.715.919.022.2

in.12 13/16

1623 3/4

30

mm325.4406.4603.2762.0

gm32455010132267

lb.0.711.212.235.00

L

B

2130

2126

2120

2116

21003 3-PIECE SET

ALIGNMENTBARS

211621202126

CODE LENGTHL


B

in.1/25/81/2

mm12.715.912.7

in.12 13/16

1616

mm325.4406.4406.4

L

B


HOLE PUNCH SETS


ALIGNMENT BARS

BALL PEIN HAMMERS

RUBBER MALLETS AND PLASTIC FACE HAMMERS ALIGNMENT

BARS



TECHNICAL STANDARDS - mdmetric.com · superior quality affordable tools 477 tools striking 10...

Documents

Transcript of TECHNICAL STANDARDS - mdmetric.com · superior quality affordable tools 477 tools striking 10...