AWMS-3-13714- Page 1 of 5

Technical SpecificationAWMS-3-13714-

Triple Monitor Mount on 400 Post

• Supports three monitors up to 24”. Larger monitors may be compatible, refer to Monitor Size (page 2).

• Larger screens compatible when upgraded to sliders. Refer to AWM-HS Technical Specification for details.

• Monitor quick release mechanism.

• Integrated, optional 180° rotation limiter to prevent interference with desk mounted panels and dividers.

• Cable management with generous capacity guides cables discreetly down the arms and post to the work surface.

0 - 9kg (0 - 20lb)*

0 - 12kg (0 - 25lb)*

318mm (12.52˝)

+45° / -25°

360°

75x75 | 100x100

Monitor weight rangeA71A13Vertical AdjustmentTilt angleMonitor rotationVESA mounting

FEATURES

WARRANTY

*Monitor weight should be within the weight range of all modular elements that make up the complete monitor mounting solution.

*Curved monitors, deep devices (such as all-in-one PCs) and offset VESA locations exert additional leverage that can exceed the capacity of the mount even though the monitor weight may be within the stated range. Please contact Atdec if you would like further information.

10 years limited

AWMS-3-13714- Page 2 of 5

Joint MovementMAX 360°/180°

JointMovement

360°

PanMovement

360°

MonitorRotation360°

MOVEMENT - 710 ARM

DIMENSIONS - 710 ARM ON POST

Front AttachmentSide Attachment

285mm

78mm(3.07”)

285mm

60mm(2.36”)

MAX.708.5mm(27.89”)

MIN.124mm(4.88”)

(11.22”)

(11.22”)

56mm(2.2”)

78mm(3.07”)

359mm(14.13”)

MONITOR SIZE

598mm

Maximum Monitor Width

20˚cockpitangle

(23.54˝)

568mmMaximum Monitor Width

with a nominal monitor

depth of 60mm (2.36˝)

and 20˚ cockpit angle

(22.36˝)

TILT ANGLE

45°

25°

AWMS-3-13714- Page 3 of 5

DIMENSIONS - 130 ARM ON POST

78mm

(3.07”)

56mm

(2.2”) 78mm

(3.07”)

60mm

(2.36”)

Front AttachmentSide Attachment

MOVEMENT - 130 ARM

Pan MovementMAX 360°/180°

MonitorRotation360°

DIMENSIONS - 710 ARM ON 400 POST

MIN

MAX MIN MAX RANGEHEIGHT ON 400 POST *C CLAMP INCREASES MINIMUM HEIGHT ON POST BY 26MM (1”)

230mm* (9.06”)

548mm* (21.57”)

318mm* (12.52”)

TILT ANGLE

45°

25°

AWMS-3-13714- Page 4 of 5

115mm(4.53”)

4.5mm(0.18”)

Ø4.5mm(0.18”)

115mm(4.53”)

100mm(3.94”)

75mm(2.95”)

DESK FIXING OPTIONS

FRONT VIEW SIDE VIEW

Below are the fixing options available for this solution. For more information and detailed specifications for these products please see the separate Technical Specifications available on the Atdec website.Note: Chosen desk fixing must be added to this solution code when ordering.

DIMENSIONS - VESA HEAD

DIMENSIONS - 130 ARM ON 400 POST

MIN

MAX MIN MAX RANGEHEIGHT ON 400 POST *C CLAMP INCREASES MINIMUM HEIGHT ON POST BY 26MM (1”)

110mm* (4.33”)

428mm* (16.85”)

318mm* (12.52”)

BOLT THROUGH AWM-FB

0-33mm(0-1.3”)

Worksurfacethickness

Rear edge ofworksurface

Min35mm(1.38”)

53mm(2.09”)

8mm(0.31”)

53mm(2.09”)

63mm(2.48”)

4mm(0.16”)

0-33mm(0-1.3”)

Worksurfacethickness

Rear edge ofworksurface

Min35mm(1.38”)

53mm(2.09”)

8mm(0.31”)

53mm(2.09”)

63mm(2.48”)

4mm(0.16”)

AWMS-3-13714- Page 5 of 5

atdec.com | atdec.co.uk | atdec.com.au

No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. ©20190320

C CLAMP AWM-FC

85mm(3.35”)

45mm(1.77”)

96mm(3.78”)Rear edge of

worksurface

Top View

18-33mm(0.71-1.3”)

Worksurfacethickness

26mm(1”)

24mm(0.94”)Front View

GROMMET CLAMP AC-GC

62mm(2.44”)

18-36mm(0.71-1.42”)

Worksurfacethickness

6mm(0.24”)

112mm(4.41”)

51mm(2.00”)

Grommethole

62mm(2.44”)

18-36mm(0.71-1.42”)

Worksurfacethickness

6mm(0.24”)

112mm(4.41”)

41mm(1.61”)

Grommethole

F CLAMP AWM-FF

43mm(1.69”)

Rear edge ofworksurface

0-79mm(0-3.11”)

Worksurfacethickness

8mm(0.31”)

74mm(2.91”)

88mm(3.46”)

55mm(2.17”)

Rear edge ofworksurface

0-79mm(0-3.11”)

Worksurfacethickness

8mm(0.31”)

74mm(3.23”)

33mm(2”) 88mm

(3.46”)

55mm(2.17”)

HEAVY DUTY F CLAMP AWM-FH

Rear edge ofworksurface

82mm(3.23”)

75mm(2.95”)

43mm(1.69”)

0-68mm(0-2.68”)

Worksurfacethickness

110mm(4.33”)

112mm(4.41”)

8mm(0.31”)

Rear edge ofworksurface

82mm(3.23”)

75mm(2.95”)

33mm(1.3”)

0-68mm(0-2.68”)

Worksurfacethickness

110mm(4.65”)

112mm(4.41”)

8mm(0.31”)