Technical Solution
4
Article No # 808-6/2646 ed to increase Lasting allowance at Side (3.00mm )and Seat (4.00mm) Increase (+) 4.00mm . (Seat Increase (+) 3.00mm . (Side) Start with 0.00mm .
-
Upload
tapash-kumar-roy -
Category
Engineering
-
view
145 -
download
0
Transcript of Technical Solution
Article No # 808-6/2646
Need to increase Lasting allowance at Side (3.00mm )and Seat (4.00mm)
Increase (+) 4.00mm . (Seat)Increase (+) 3.00mm . (Side)
Start with 0.00mm .
Article No # 808-6/2646
Opened area. Required stitching at the edge.The edge stitching distance should be maximum 1.5mm.
The material is tearing out at the time of Seat & Side lasting (by machine) .
Article No # 808-6690
Opened area. Required stitching at the edge.The edge stitching distance should be maximum 1.5mm.
The material is tearing out at the time of Seat & Side lasting (by machine) .