Technical Information Bulletin LED Vapor Tight Luminaire · IET ETI TEETES TOT IC ISTORTI T Date:...
Transcript of Technical Information Bulletin LED Vapor Tight Luminaire · IET ETI TEETES TOT IC ISTORTI T Date:...
Data is based upon tests performed in a controlled environment and representative of relative performance. Actual performance can vary depending on operating conditions. Specifications are subject to change without notice.
December 13, 2016
ORDERING INFORMATION
FEATURES AND SPECIFICATIONS
FIXTURE PERFORMANCE POWER FACTOR (PF)
Technical Information Bulletin LED Vapor Tight Luminaire
AMBIENT OPERATING TEMPERATURES
TOTAL HARMONIC DISTORTION (THD)
Date:In hands date of project:Project name/Number:Name of distributor:Client #:Name of end user:
DIMMABLE DAMP WET INDOOR OUTDOOR COMMERCIAL INDUSTRIAL RESIDENTIAL EDUCATIONAL
YEARS
WARRANTY
5IP65IP65
RATING
Order code: 65056Description: LSV/S2/40W/40K/2/DD1/FP/STDUPC: 69549650565Case quantity: 1Luminaire description: LED Vapor Tight Luminaire
Lens type: Frosted PolycarbonateLens benefits: The lens is: UV stabilized, frosted, flexible, light-weight and made of impact
resistant polycarbonate.Applications: Ideal for use in parking garages, dusty wet environments & various industrial,
residential and commercial applications. Indoor or Outdoor applications.Target Mounting Heights: Suitable for lower mounting heightsComparable Traditional Light Source: 2 Lamp T5H0 Vapor Tight LuminaireVoltage (V): 120-277Frequency (Hz): 50/60Input Current (mA): 120 V / 340 mAIn-rush current: 50 ADimming: 0-10 VBeam Angle: 112°Environment: Wet Locations (IP65)Mounting: Surface/SuspendedWarranty: Limited 5-year warranty
Wattage (W): 40Colour temperature (K): 4 000CRI: 82Average life in hours: 50 000Lumens: 5 200Efficacy with lens (LPW): 130
-30°C to + 40°C (-22°F to + 104°F)
120 V 4.7%277 V 15.7%347 V -480 V -
120 V >0.97277 V >0.92347 V -480 V -
CAN ICES-005 (A) / NMB-005 (A)This lighting equipment complies with Canadian standard ICES-005; for use in commercial applications.
Data is based upon tests performed in a controlled environment and representative of relative performance. Actual performance can vary depending on operating conditions. Specifications are subject to change without notice.
December 13, 2016
ORDERING INFORMATION
PHOTOMETRICS - BEAM SPREAD*
PHOTOMETRICS - COEFFICIENTS OF UTILIZATION (ZONAL CAVITY METHOD)*
PHOTOMETRICS - CANDELA DISTRIBUTION*
Technical Information Bulletin LED Vapor Tight Luminaire
The attached data is provided to assist users in making lighting decisions based on various assumptions, factors and methods. Resources and efforts have been put in place to account for the data and the development of this tool however STANDARD does not warrant or guarantee that the results obtained will be accurate under actual use conditions. A lighting layout is recommend to ensure the proper light levels are attained to satisfy the demand of the application
Vertical spread -Horizontal spread -
Height Footcandle Beam Diameter
2'
4'
6'
8'
10'
4.9' 5.7'
9.8' 11.5'
14.7' 17.2'
19.6' 23.0'
24.5' 28.7'
440.5
110.1
48.9
27.5
17.6
101.6°110.3°
Order code: 65056Description: LSV/S2/40W/40K/2/DD1/FP/STDUPC: 69549650565Case quantity: 1Luminaire description: LED Vapor Tight Luminaire
170° 160° 150° 140°
VA: 0° 10° 20° 30° 40°
130°
120°
110°
100°
90°
80°
110°80°
70°
60°
50°
Polar Candela Distribution
-0°H -90°H
1 8001 500
1 200
900
600
300
CD: 0
300
600
9001 200
1 500
1 800
Data is based upon tests performed in a controlled environment and representative of relative performance. Actual performance can vary depending on operating conditions. Specifications are subject to change without notice.
December 13, 2016
ORDERING INFORMATION
TECHNICAL DRAWINGS
DIMENSIONS
Technical Information Bulletin LED Vapor Tight Luminaire
WARNINGS
INCLUDED
The attached data is provided to assist users in making lighting decisions based on various assumptions, factors and methods. Resources and efforts have been put in place to account for the data and the development of this tool however STANDARD does not warrant or guarantee that the results obtained will be accurate under actual use conditions. A lighting layout is recommend to ensure the proper light levels are attained to satisfy the demand of the application
Qty Description Price
I accept the specifications of the luminaire configuration mentioned above.
Name:Company:Signature: Date:
• Installation and maintenance must be performed by licensed electricians only.• To avoid risk of electric shock, make sure to turn off main power switch prior to installation or maintenance.• Must be installed in compliance with Canadian Electrical Code in Canada or National Electrical Code (NEC) in the US.• Make sure input voltage and frequency are compatible with the fixture. Check installation guide for power requirements prior to installation.
WARNING – Risk of electric shock. Suitable for damp locations.
Cable gland kit & Stainless steel mounting hardware accommodates flush (wall/ceiling) Mounting applications.
Order code: 65056Description: LSV/S2/40W/40K/2/DD1/FP/STDUPC: 69549650565Case quantity: 1Luminaire description: LED Vapor Tight Luminaire
Length: 50.79" (129 cm)Width: 6.39" (16.23 cm)Depth: 3.86" (9.8 cm)Weight: 8.80 lbs (4 kg)
DESCRIPTION
A luminaire ideal for a variety of industrial, commercial, vandal resistant and residential applications. The housing is sealed with a uniform gasket that blocks the ingress of moisture and dust and reinforced snap clips lock the luminaire together. Polycarbonate construction makes the luminaire lightweight, �exible, vandal resistant and highly impact resistant. As well, the UV stabilized polycarbonate housing and lens with LED di�using pigment is impervious to rust or rot and is una�ected by extreme temperatures. Installed either indoors or outside, the VP4-L provides superior light distribution. Our standard color temperature is 40k, however other color temperatures are available upon request.
FEATURES
• Lightweight, �exible and durable polycarbonate construction• Integral gasket forms uniform, long-life seal around the entire enclosure• Stainless steel mounting hardware for wall, ceiling or suspended mounting
• Multiple conduit knockouts in housing ends• Flush mount
• Row mount aligners molded into housing ends• UV stabilized lens with LED di�using pigments• Sealed strain relief/cable gland kit included
DIMENSIONS
VP4-L
VAPOR TIGHT LINEAR FIXTURELED
VP4 L
Series Lamp type Wattage Voltage Color temperature Options
VP4 L - LED A1 - 40W (3600 lumens)A2 - 54W (5509 lumens)A3 - 75W (7200 lumens)
2 -120-277V8 - 347V
40K - 4000K50K - 5000K
DIM1 - Dimming driver 0-10VL6 - 6' cable lengthL10 - 10' cable lengthSS - Stainless steel latchesOSI - Occupancy sensor (ON/OFF)ODIM - Occupancy sensor Bi-level dimmingEM - Emergency backup (from 0°C - 25°C) 120/277V onlyCL* - Cold location (-40°C)*KV - 10kV Surge protector
* Consult factory.
3-3/4"
36"
6-1/2"
50-1/4"
ORDERING GUIDE
Approvals:CSA Certi�ed Suitable for damp & wet locations.
IP RATING
65
Project: Contractor:
50.79" (129 cm)
38" (96.5 cm)
3.86" (9.8 cm)
6.5" (16.5 cm)