TECHNICAL DESCRIPTION - · PDF fileTECHNICAL DESCRIPTION The renewed ETN-Lined pumps are...
Transcript of TECHNICAL DESCRIPTION - · PDF fileTECHNICAL DESCRIPTION The renewed ETN-Lined pumps are...
TECHNICAL DESCRIPTION
The renewed ETN-Lined pumps are singlestage, magnetic driven, centrifugal pumps in close-coupled execution. ETN-Lined pumps are available both inPP+GF and ETFE. The pump casing is integrali lined,manufactured with the CDR ILS (Integral Lined System) technology. This is a particular transfer moulding technology that allows to mould the corrosion resistant layer directly on the metallic shell, providing optimal grip as well as elevated mechanical and corrosion resistance. The LF Graphite bush configuration, with its low friction coefficient, combined with CDR FTC exclusive balancing system of the internal magnet (Full Thrust Control), allow to withstand occasional dry running periods up to one hour. On the other hand, the SiC version allows the use of ETN-Lined pumps with particularly aggressiveand abrasive liquids. The magnetic coupling with neodymium-iron-boron magnets insures a sealless, zero-leakage pumping solution. Last but not least, ETN-Lined pumps feature a most appealing price/quality level for both end users and OEMs.
HYDRAULIC PERFORMANCES
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorizatio
ETN EN DT 01 Rev.2- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
FEATURES AND APPLICATIONS
FEATURES AND APPLICATIONS DESCRIPTION
Close coupled centrifugal pumpPump type
PP-GF / ETFE with "ILS" technologyMaterials
Corrosive, inflammable and toxic liquidsHandled liquids
Q max=80 m3/h H=34mHydraulic performances
from 0,75 kW (gr. 80) to 7.5 kW (gr. 132)Drives
from -20 °C to +90 °CTemperature range
PP-GF from -10°C=PN 6 to 80°C=PN 2 ETFE from -20°C=PN 6 to 90°C=PN 4
System pressure ratings
400 cSt maxViscosity
2% max concentration in weightSolids
Hardness max 800 Vk.
Size max 150 µm.
DRY RUNNING PROTECTION FEATURES "FTC" (Full Thrust Control) CDR System
Features Description
AL2O3 99,7 % CeramicShaft material
Graphite LFBushing material
PP-GF / ETFEMaterials
1 hWorking time with unprimed pump
2 hWorking time with dry pump
Note: Liquid used for testing: water. Bushing wear after test: insignificant dimensional change
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorizatio
ETN EN DT 02 Rev.3- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
MAX TEMPERATURES AND PRESSURE
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DT 03 Rev.2- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
PARTS INTERCHANGEABILITY TABLE
Pump casing Isolation shell Isolant shell cover Shaft Pump
Size Motor size 102 151,1 151,2 211
50 80 9420/01/0M 9420/13/0M 9410/32/0M 1820/03/0M 50 90 9420/01/0M 9420/13/0M 9410/32/0M 1820/03/0M 50 100/112 9420/01/0M 9420/13/0M 9410/32/0M 1820/03/0M 60 80 9425/01/0M 9420/13/0M 9410/32/0M 1820/03/0M 60 90 9425/01/0M 9420/13/0M 9410/32/0M 1820/03/0M 60 100/112 9425/01/0M 9420/13/0M 9410/32/0M 1820/03/0M 60 132 9425/01/0M 9420/13/0M 9410/32/0M 1820/03/0M 70 80 9430/_01/0M 9420/13/0M 9410/32/0M 1820/03/0M 70 90 9430/_01/0M 9420/13/0M 9410/32/0M 1820/03/0M 70 100/112 9430/_01/0M 9420/13/0M 9410/32/0M 1820/03/0M 70 132 9430/_01/0M 9420/13/0M 9410/32/0M 1820/03/0M
Impeller Rotating bushing Axial thrust shoe Lantern Support flange Pump
Size Motor size 230 310 317 341 341,1
50 80 9424/C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* 9420/10/0M02 50 90 9424/C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* 9420/10/0M02 50 100/112 9424/C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* - 60 80 9426/C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* 9420/10/0M02 60 90 9426/C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* 9420/10/0M02 60 100/112 9426/C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* - 60 132 9426/C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* 9425/03/0M02 70 80 9430/C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* 9420/10/0M02 70 90 9430/C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* 9420/10/0M02 70 100/112 9430/C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* - 70 132 9430/C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* 9425/03/0M02
* Lantern with incorporated flange cod.9420/19/0M18
Casing gasket Rotating bushing gasket
Pump lantern flange Safety ring Adapting ring Pump Size
Motor size
412,1 412,2 500,1 502 502,1 50 80 130/4725M 130/2131M44 9420/09/0M02** 9420/15/0M26 - 50 90 130/4725M 130/2131M44 9420/09/0M02** 9420/15/0M26 - 50 100/112 130/4725M 130/2131M44 9420/09/0M02** 9420/15/0M26 - 60 80 130/4725M 130/2131M44 9420/09/0M02** 9420/15/0M26 - 60 90 130/4725M 130/2131M44 9420/09/0M02** 9420/15/0M26 - 60 100/112 130/4725M 130/2131M44 9420/09/0M02** 9420/15/0M26 - 60 132 130/4725M 130/2131M44 9420/09/0M02** 9420/15/0M26 - 70 80 130/4800M 130/2131M44 9420/09/0M02** 9420/15/0M26 9430/04/0M44 70 90 130/4800M 130/2131M44 9420/09/0M02** 9420/15/0M26 9430/04/0M44 70 100/112 130/4800M 130/2131M44 9420/09/0M02** 9420/15/0M26 9430/04/0M44 70 132 130/4800M 130/2131M44 9420/09/0M02** 9420/15/0M26 9430/04/0M44
** With lantern cod.9420/19/0M18 pump lantern flange has to be removed
Spacer Spacer. Washer External magnet Suction cover Pump Size
Motor size 505,1 505,2 550,2 847 106
50 80 9420/12/0M08*** 9420/16/0M02 9410/42/0M02 9180/C1/AM31 9420/03/0M43 50 90 9420/12/0M08*** 9420/11/0M02 9410/41/0M02 9180/C1/BM31 9420/03/0M43 50 100/112 9420/12/0M08*** - 9410/45/0M02 9180/C1/CM31 9420/03/0M43 60 80 9420/12/0M08*** 9420/16/0M02 9410/42/0M02 9180/C1/AM31 9425/02/0M43 60 90 9420/12/0M08*** 9420/11/0M02 9410/41/0M02 9180/C1/BM31 9425/02/0M43 60 100/112 9420/12/0M08*** - 9410/45/0M02 9180/C1/CM31 9425/02/0M43 60 132 9420/12/0M08*** - 3200/01M05 9417/C1/0M31 9425/02/0M43 70 80 9420/12/0M08*** 9420/16/0M02 9410/42/0M02 9180/C1/AM31 9430/03/0M43 70 90 9420/12/0M08*** 9420/11/0M02 9410/41/0M02 9180/C1/BM31 9430/03/0M43 70 100/112 9420/12/0M08*** - 9410/45/0M02 9180/C1/CM31 9430/03/0M43 70 132 9420/12/0M08*** - 3200/01M05 9417/C1/0M31 9430/03/0M43
*** With lantern cod.9420/19/0M18 spacer has to be removed
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi) Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
ETN EN -DT -04 -Rev.3-
OVERALL DIMENSIONS - MOTOR SIZE 80/90/100/112/132
ETN 50 40 UNI 2223/29 PN 16 ANSI B16.5 150 RF
UNI 2223/29 PN 16 ANSI B16.5 150 RF
25 80
ETN 60 65 UNI 2223/29 PN 16 ANSI B16.5 150 RF
UNI 2223/29 PN 16 ANSI B16.5 150 RF
40 80
ETN 70 80 UNI 2223/29 PN 16 ANSI B16.5 150 RF
UNI 2223/29 PN 16 ANSI B16.5 150 RF
50 100
80 B5 175,5 233 29090 B5 175,5 256 336100 B5 175,5 314 366112 B5 175,5 323 415132 B5 193,5 400 503
ETN 50 32 80 19,5 24,4 51,5 56,4ETN 50 32 90 24,5 34,5 56,5 66,5ETN 50 32 100 35,5 40 67,5 72ETN 50 32 112 45 65 77 97ETN 50 32 132 68 80 100 112ETN 60 32 80 19,5 24,4 51,5 56,4ETN 60 32 90 24,5 34,5 56,5 66,5ETN 60 32 100 35,5 40 67,5 72ETN 60 32 112 45 65 77 97ETN 60 32 132 68 80 100 112ETN 70 37 80 19,5 24,4 56,5 61,4ETN 70 37 90 24,5 34,5 61,5 71,5ETN 70 37 100 35,5 40 72,5 77ETN 70 37 112 45 65 82 102ETN 70 37 132 68 80 105 117
General dimensionsPump type Dna DNm Motor
Size f1Motor dimensions L1
TEFC ADPEa
Pump weight (Kg) Pump weight with motor (Kg)TEFC Eex
Pump weightMotor weight (Kg)
TEFC EexSize
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DDI 05 Rev.2- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
OVERALL DIMENSIONS ON ETN BASE - MOTOR SIZE 80/90/100/112/132
ETN 50 40 UNI 2223/29 PN 16 ANSI B16.5 150 RF
UNI 2223/29 PN 16 ANSI B16.5 150 RF
25 80
ETN 60 65 UNI 2223/29 PN 16 ANSI B16.5 150 RF
UNI 2223/29 PN 16 ANSI B16.5 150 RF
40 80
ETN 70 80 UNI 2223/29 PN 16 ANSI B16.5 150 RF
UNI 2223/29 PN 16 ANSI B16.5 150 RF
50 100
80 B5 175,5 233 29090 B5 175,5 256 336100 B5 175,5 314 366112 B5 175,5 323 415132 B5 193,5 400 503
ETN 50 32 80 19,5 24,4 51,5 56,4ETN 50 32 90 24,5 34,5 56,5 66,5ETN 50 32 100 35,5 40 67,5 72ETN 50 32 112 45 65 77 97ETN 50 32 132 68 80 100 112ETN 60 32 80 19,5 24,4 51,5 56,4ETN 60 32 90 24,5 34,5 56,5 66,5ETN 60 32 100 35,5 40 67,5 72ETN 60 32 112 45 65 77 97ETN 60 32 132 68 80 100 112ETN 70 37 80 19,5 24,4 56,5 61,4ETN 70 37 90 24,5 34,5 61,5 71,5ETN 70 37 100 35,5 40 72,5 77ETN 70 37 112 45 65 82 102ETN 70 37 132 68 80 105 117
General dimensionsPump type Dna DNm Motor
Size f1Motor dimensions L1
TEFC ADPEa
Pump weight (Kg) Pump weight with motor (Kg)TEFC Eex
Pump weightMotor weight (Kg)
TEFC EexSize
ETN 1550ETN 1560ETN 1570
Pump type Baseplate weight (Kg)
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DDI 06 Rev.2- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
EXPLODED VIEW
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DDI 07 Rev.2- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
3D DRAWING PP-GF PUMP MOTOR SIZE 80/90
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DIS 08 Rev.2- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
2D DRAWING PP-GF PUMP MOTOR SIZE 80/90
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DIS 09 Rev.2- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
PART LIST PP-GF PUMP MOTOR SIZE 80/90
102 1 Pump casing PP nodular cast iron lined106 1 Suction cover ETFE
151,1 1 Isolation shell PP-GF151,2 1 Isolation shell cover PC-CF211 1 Shaft AL2O3/SiC230 1 Impeller PP310 2 Rotating bushing Graphite LF/SiC/AL2O3+PTFE317 2 Axial thrust shoe AL2O3* / SiC*341 1 Lantern Nodular cast iron
341,1 1 Support flange Carbon steel412,1 1 Gasket FPM/EPDM/FFKM412,2 2 Gasket PTFE500,1 1 Lantern flange** Carbon steel502 1 Safety ring Bronze
505,1 2 Spacer** AISI 304505,2 1 Spacer Carbon steel550,1 4 Washer AISI 304550,2 1 Washer AISI 304550,3 4 Washer AISI 304847 1 External magnet NdFeB900 1 Screw AISI 304
901,1 4 Screw AISI 304901,2 2 Screw AISI 304901,3 6 Screw** AISI 304902 4 Stud AISI 304920 4 Nut AISI 304
Ref Qty Description Materials
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DIS 10 Rev.3- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
* + PFA ring shock absorbing version**If the lantern incorporates the flange, part numbers 500,1_505,1_901,3 have to be removed
3D DRAWING PP-GF PUMP MOTOR SIZE 100/112
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DIS 11 Rev.2- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
2D DRAWING PP-GF PUMP MOTOR SIZE 100/112
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DIS 12 Rev.2- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
PART LIST PP-GF PUMP MOTOR SIZE 100/112
102 1 Pump casing PP nodular cast iron lined106 1 Suction cover ETFE
151,1 1 Isolation shell PP-GF151,2 1 Isolation shell cover PC-CF211 1 Shaft AL2O3/SiC230 1 Impeller PP310 2 Rotating bushing Graphite LF/SiC/AL2O3+PTFE317 2 Axial thrust shoe AL2O3* / SiC*341 1 Lantern Nodular cast iron
412,1 1 Gasket FPM/EPDM/FFKM412,2 2 Gasket PTFE500,1 1 Lantern flange** Carbon steel502 1 Safety ring Bronze
505,1 2 Spacer** AISI 304550,1 4 Washer AISI 304550,2 1 Washer AISI 304550,3 4 Washer AISI 304847 1 External magnet NdFeB900 1 Screw AISI 304
901,1 4 Screw AISI 304901,2 2 Screw AISI 304901,3 6 Screw** AISI 304901,4 4 Screw AISI 304
Ref Qty Description Materials
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DIS 13 Rev.3- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
* + PFA ring shock absorbing version**If the lantern incorporates the flange, part numbers 500,1_505,1_901,3 have to be removed
3D DRAWING PP-GF PUMP MOTOR SIZE 132
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DIS 14 Rev.2- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
2D DRAWING PP-GF PUMP MOTOR SIZE 132
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DIS 15 Rev.2- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
PART LIST PP-GF PUMP MOTOR SIZE 132
102 1 Pump casing PP nodular cast iron lined106 1 Suction cover ETFE
151,1 1 Isolation shell PP-GF151,2 1 Isolation shell cover PC-CF211 1 Shaft AL2O3/SiC230 1 Impeller PP310 2 Rotating bushing Graphite LF/SiC/AL2O3+PTFE317 2 Axial thrust shoe AL2O3* / SiC*341 1 Lantern Nodular cast iron
341,1 1 Support flange Carbon steel412,1 1 Gasket FPM/EPDM/FFKM412,2 2 Gasket PTFE500,1 1 Lantern flange** Carbon steel502 1 Safety ring Bronze
505,1 2 Spacer** AISI 304550,1 4 Washer AISI 304550,2 1 Washer AISI 304550,3 4 Washer AISI 304847 1 External magnet NdFeB900 1 Screw AISI 304
901,1 4 Screw AISI 304901,2 2 Screw AISI 304901,3 6 Screw** AISI 304901,4 4 Screw AISI 304914,1 4 Inner exagon screw AISI 304
Ref Qty Description Materials
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DIS 16 Rev.3- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
* + PFA ring shock absorbing version**If the lantern incorporates the flange, part numbers 500,1_505,1_901,3 have to be removed
3D DRAWING ETFE PUMP MOTOR SIZE 80/90
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DIS 17 Rev.2- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
2D DRAWING ETFE PUMP MOTOR SIZE 80/90
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DIS 18 Rev.2- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
PART LIST ETFE PUMP MOTOR SIZE 80/90
102 1 Pump casing ETFE nodular cast iron lined106 1 Suction cover ETFE
151,1 1 Isolation shell ETFE151,2 1 Isolation shell cover PC-CF211 1 Shaft AL2O3/SiC230 1 Impeller ETFE310 2 Rotating bushing Graphite LF/SiC/AL2O3+PTFE317 2 Axial thrust shoe AL2O3* / SiC*341 1 Lantern Nodular cast iron
341,1 1 Support flange Carbon steel412,1 1 Gasket FPM/EPDM/FFKM412,2 2 Gasket PTFE500,1 1 Lantern flange** Carbon steel502 1 Safety ring Bronze
505,1 2 Spacer** AISI 304505,2 1 Spacer Carbon steel550,1 4 Washer AISI 304550,2 1 Washer AISI 304550,3 4 Washer AISI 304847 1 External magnet NdFeB900 1 Screw AISI 304
901,1 4 Screw AISI 304901,2 2 Screw AISI 304901,3 6 Screw** AISI 304902 4 Stud AISI 304920 4 Nut AISI 304
Ref Qty Description Materials
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DIS 19 Rev.3- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
* + PFA ring shock absorbing version**If the lantern incorporates the flange, part numbers 500,1_505,1_901,3 have to be removed
3D DRAWING ETFE PUMP MOTOR SIZE 100/112
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DIS 20 Rev.2- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
2D DRAWING ETFE PUMP MOTOR SIZE 100/112
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DIS 21 Rev.2- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
PART LIST ETFE PUMP MOTOR SIZE 100/112
102 1 Pump casing ETFE nodular cast iron lined106 1 Suction cover ETFE
151,1 1 Isolation shell ETFE151,2 1 Isolation shell cover PC-CF211 1 Shaft AL2O3/SiC230 1 Impeller ETFE310 2 Rotating bushing Graphite LF/SiC/AL2O3+PTFE317 2 Axial thrust shoe AL2O3* / SiC*341 1 Lantern Nodular cast iron
412,1 1 Gasket FPM/EPDM/FFKM412,2 2 Gasket PTFE500,1 1 Support flange** Carbon steel505,1 2 Spacer** AISI 304550,1 4 Washer AISI 304550,3 4 Washer AISI 304550,4 1 Washer AISI 304847 1 External magnet NdFeB
900,1 1 Screw AISI 304901,1 4 Screw AISI 304901,3 6 Screw** AISI 304901,4 4 Screw AISI 304
Ref Qty Description Materials
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DIS 22 Rev.3- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
* + PFA ring shock absorbing version**If the lantern incorporates the flange, part numbers 500,1_505,1_901,3 have to be removed
3D DRAWING ETFE PUMP MOTOR SIZE 132
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DIS 23 Rev.2- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
2D DRAWING ETFE PUMP MOTOR SIZE 132
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DIS 24 Rev.2- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
PART LIST ETFE PUMP MOTOR SIZE 132
102 1 Pump casing ETFE nodular cast iron lined106 1 Suction cover ETFE
151,1 1 Isolation shell ETFE151,2 1 Isolation shell cover PC-CF211 1 Shaft AL2O3/SiC230 1 Impeller ETFE310 2 Rotating bushing Graphite LF/SiC/AL2O3+PTFE317 2 Axial thrust shoe AL2O3*/SiC*341 1 Lantern Nodular cast iron
341,1 1 Support flange Carbon steel412,1 1 Gasket FPM/EPDM/FFKM412,2 2 Gasket PTFE500,1 1 Support flange** Carbon steel502 1 Safety ring Bronze
505,1 2 Spacer** AISI 304550,1 4 Washer AISI 304550,2 1 Washer AISI 304550,3 4 Washer AISI 304847 1 External magnet NdFeB900 1 Screw AISI 304
901,1 4 Screw AISI 304901,2 2 Screw AISI 304901,3 6 Screw** AISI 304901,4 4 Screw AISI 304914,1 4 Inner exagon screw AISI 304
Ref Qty Description Materials
C.D.R. Pompe S.p.A. Via P. Togliatti 26/A 20030-Senago (Mi)Tel. : +39 02 9901941 Fax: +39 02 9980606 Web: www.cdrpompe.com e-mail: [email protected]
This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorization
ETN EN DIS 25 Rev.3- - - -
Improvements and/or changes to this document may be made by C.D.R. Pompe S.p.A. at any time without notice
* + PFA ring shock absorbing version**If the lantern incorporates the flange, part numbers 500,1_505,1_901,3 have to be removed