Technical datasheet and material specification
Transcript of Technical datasheet and material specification
Technical datasheet and material specification We hereby confirm that below mentioned product conform to the technical specification shown in this document.
Identification Model No T30
Description 1” sanitary diaphragm pump
Serial No -
Materials and specifications
Part description and part No Material Options Housings (wetted, pos 11) Stainless steel AISI 316L
In/outlets (wetted, pos 13) Stainless steel AISI 316L
Diaphragms (wetted, pos 15) EPDM / PTFE / NBR / White EPDM / White PTFE
Valve balls (wetted, pos 23) EPDM / PTFE / NBR / Polyurethane / Stainless steel AISI 316L
Valve seats (integrated in pos 11 and 13) Stainless steel AISI 316L Centre block (not wetted) PP (polypropylene)
Air valve (not wetted) Brass/NBR Brass/EPDM Brass/FKM AISI316L/FKM PET/FKM
General data Inlet connection Clamp ISO 2852, 1” General performance curve
Outlet connection Clamp ISO 2852, 1”
Air connection ¼” BSP
Max discharge pressure 8 bar
Max air pressure 8 bar
Volume per stroke 50 ml
Temperature range -20.... +110°C
Weight 3 kg
ATEX Available Upon Request
Notes Special Executions Available upon request
Connections Special Executions Available upon request
Technical datasheet and material specification We hereby confirm that below mentioned product conform to the technical specification shown in this document.
Identification Model No T50
Description ½” diaphragm pump
Serial No -
Materials and specifications
Part description and part No Material Options
Housings (wetted, pos 11) PE / PTFE
In/outlets (wetted, pos 13) PE / PTFE / AISI 316L
Diaphragms (wetted, pos 15) PTFE / EPDM / NBR
Valve balls (wetted, pos 23) EPDM / PTFE / FKM / NBR / Polyurethane / AISI 316L / Ceramic / SiC
Valve seats (wetted, pos 20, 21) PTFE / Polyurethane / AISI 316
Spacer sleeve (wetted, pos 19) PE / PTFE / AISI 316L Centre block (not wetted) PP
Air valve (not wetted) Brass/NBR Brass/EPDM Brass/FKM AISI 316L/FKM PET / FKM
General data Inlet connection Thread ½” BSP (female) General performance curve
Outlet connection Thread ½” BSP (female)
Air connection Thread ¼” BSP (female)
Max discharge pressure 8 bar
Max air pressure 8 bar
Volume per stroke 87.5 ml
Temperature range -20°C.... +70°C
Weight 5.5 kg
Atex Available upon request
Noise data Less than 80 dB (A)
Notes Special executions on request
Connections Special executions on request
Technical datasheet and material specification We hereby confirm that below mentioned product conform to the technical specification shown in this document.
Identification Model No T80
Description 1” sanitary diaphragm pump Serial No -
Materials and specifications
Part description and part No Material Options
Housings (wetted, pos 11) Stainless steel AISI 316L
In/outlets (wetted, pos 13) Stainless steel AISI 316L
Diaphragms (wetted, pos 15) EPDM / PTFE / NBR / White EPDM / White PTFE Valve balls (wetted, pos 23) EPDM / PTFE / NBR / Polyurethane / Stainless steel AISI 316L
Valve seats (integrated in pos 11 and 13) Stainless steel AISI 316L
Centre block (not wetted) PP (polypropylene)
Air valve (not wetted) Brass/NBR Brass/EPDM Brass/FKM AISI316L/FKM PET/FKM
General data Inlet connection Clamp ISO 2852, 1” General performance curve
Outlet connection Clamp ISO 2852, 1”
Air connection ¼” BSP
Max discharge pressure 8 bar
Max air pressure 8 bar
Volume per stroke 87.5 ml
Temperature range -20.... +110°C
Weight 8 kg
ATEX Available upon request
Notes Special Executions Available Upon Request
Connections Special Executions Available Upon Request
Technical datasheet and material specification We hereby confirm that below mentioned product conform to the technical specification shown in this document.
Identification Model No T100
Description 1” diaphragm pump
Serial No -
Materials and specifications
Part description and part No Material Options
Housings (wetted, pos 11) PE / PTFE
In/outlets (wetted, pos 13) PE / PTFE / AISI 316L Diaphragms (wetted, pos 15) PTFE / EPDM / NBR
Valve balls (wetted, pos 23) EPDM / PTFE / FKM / NBR / Polyurethane / AISI 316L / Ceramic / SiC
Valve seats (wetted, pos 20, 21) PTFE / Polyurethane / AISI 316
Spacer sleeve (wetted, pos 19) PE / PTFE / AISI 316L
Centre block (not wetted) PP
Air valve (not wetted) Brass/NBR Brass/EPDM Brass/FKM AISI 316L/FKM PET / FKM
General data Inlet connection 1” BSP (female) General performance curve
Outlet connection 1” BSP (female)
Air connection ¼” BSP (female)
Max discharge pressure 8 bar
Max air pressure 8 bar
Volume per stroke 280 ml
Temperature Max 70°C
Weight 10 kg
Atex Available upon request
Noise data Less than 80 dB (A)
Notes Special execution on request
Connections Special execution on request
Technical datasheet and material specification We hereby confirm that below mentioned product conform to the technical specification shown in this document.
Identification Model No T125 STT
Description 1 ½” sanitary diaphragm pump
Serial No -
Materials and specifications
Part description and part No Material Options Housings (wetted, pos 11) Stainless steel AISI 316L
In/outlets (wetted, pos 13) Stainless steel AISI 316L
Diaphragms (wetted, pos 15) EPDM / PTFE / NBR / White EPDM / White PTFE
Valve balls (wetted, pos 23) EPDM / PTFE / NBR / Polyurethane / Stainless steel AISI 316L
Valve seats (integrated in pos 11 and 13) Stainless steel AISI 316L
Centre block (not wetted) PP (polypropylene) Air valve (not wetted) Brass/NBR
Brass/EPDM Brass/FKM AISI316L/FKM PET/FKM
General data Inlet connection Clamp ISO 2852, 1 ½” General performance curve
Outlet connection Clamp ISO 2852, 1 ½”
Air connection ¼” BSP
Max discharge pressure 8 bar
Max air pressure 8 bar
Volume per stroke 300 ml
Temperature range -20.... +110°C
Weight 11 kg
Dimensions (LxWxH) 320x350x439mm
ATEX Available upon request
Notes Special Executions Available Upon Request
Connections Special Executions Available Upon Request
Technical datasheet and material specification We hereby confirm that below mentioned product conform to the technical specification shown in this document.
Identification Model No T200
Description 1 ½” diaphragm pump
Serial No -
Materials and specifications
Part description and part No Material Options Housings (wetted, pos 11) PE / PTFE
In/outlets (wetted, pos 13) PE / PTFE / AISI 316L
Diaphragms (wetted, pos 15) PTFE / EPDM / NBR
Valve balls (wetted, pos 23) EPDM / PTFE / FKM / NBR / Polyurethane / AISI 316L / Ceramic / SiC
Valve seats (wetted, pos 20, 21) PTFE / Polyurethane / AISI 316
Spacer sleeve (wetted, pos 19) PE / PTFE / AISI 316L
Centre block (not wetted) PP
Air valve (not wetted) Brass/NBR Brass/EPDM Brass/FKM AISI 316L/FKM PET / FKM
General data Inlet connection 1 ½” BSP (female) General performance curve
Outlet connection 1 ½” BSP (female)
Air connection ½” BSP (female)
Max discharge pressure 8 bar
Max air pressure 8 bar
Volume per stroke 933 ml
Temperature Max 70°C
Weight 24 kg
Atex Available upon request
Noise data Less than 80 dB (A)
Notes Special executions on request
Connections Special executions on request
Technical datasheet and material specification We hereby confirm that below mentioned product conform to the technical specification shown in this document.
Identification Model No T225
Description 2” sanitary diaphragm pump
Serial No -
Materials and specifications
Part description and part No Material Options Housings (wetted, pos 11) Stainless steel AISI 316L
In/outlets (wetted, pos 13) Stainless steel AISI 316L
Diaphragms (wetted, pos 15) EPDM / PTFE / NBR / White EPDM / White PTFE
Valve balls (wetted, pos 23) EPDM / PTFE / NBR / Polyurethane / Stainless steel AISI 316L
Valve seats (integrated in pos 11 and 13) Stainless steel AISI 316L
Centre block (not wetted) PP (polypropylene) Air valve (not wetted) Brass/NBR
Brass/EPDM Brass/FKM AISI316L/FKM PET/FKM
General data Inlet connection Clamp ISO 2852, 2” General performance curve
Outlet connection Clamp ISO 2852, 2”
Air connection ½” BSP
Max discharge pressure 8 bar
Max air pressure 8 bar
Volume per stroke 933 ml
Temperature range -20.... +110°C
Weight 21 kg
Dimensions (LxWxH) 360x420x639 mm
ATEX Available upon request
Notes Special Executions Available Upon Request
Connections Special Executions Available Upon Request
Technical datasheet and material specification We hereby confirm that below mentioned product conform to the technical specification shown in this document.
Identification Model No T400
Description 2” diaphragm pump Serial No -
Materials and specifications
Part description and part No Material Options
Housings (wetted, pos 11) PE / PTFE
In/outlets (wetted, pos 13) PE / PTFE / AISI 316L
Diaphragms (wetted, pos 15) PTFE / EPDM / NBR Valve balls (wetted, pos 23) EPDM / PTFE / FKM / NBR /
Polyurethane / AISI 316L / Ceramic / SiC
Valve seats (wetted, pos 20, 21) PTFE / Polyurethane / AISI 316
Spacer sleeve (wetted, pos 19) PE / PTFE / AISI 316L Centre block (not wetted) PP
Air valve (not wetted) Brass/NBR Brass/EPDM Brass/FKM AISI 316L/FKM PET / FKM
General data Inlet connection 2” BSP (female) General performance curve
Outlet connection 2” BSP (female)
Air connection ½” BSP (female)
Max discharge pressure 8 bar
Max air pressure 8 bar
Volume per stroke 2300 ml
Temperature Max 70°C
Weight 44 kg
Atex Available upon request
Noise data Less than 80 dB (A)
Notes Special executions on request
Connections Special executions on request
Technical datasheet and material specification
We hereby confirm that below mentioned product conform to the technical specification shown in this document.
Identification
Model No T425
Description 2 ½” sanitary diaphragm pump
Serial No -
Materials and specifications
Part description and part No Material Options
Housings (wetted, pos 11) Stainless steel AISI 316L
In/outlets (wetted, pos 13) Stainless steel AISI 316L Diaphragms (wetted, pos 15) EPDM / PTFE / NBR / White EPDM / White PTFE
Valve balls (wetted, pos 23) EPDM / PTFE / NBR / Polyurethane / Stainless steel AISI 316L
Valve seats (integrated in pos 11 and 13) Stainless steel AISI 316L
Centre block (not wetted) PP (polypropylene)
Air valve (not wetted) Brass/NBR Brass/EPDM Brass/FKM AISI316L/FKM PET/FKM
General data
Inlet connection Clamp ISO 2852, 2 ½” General performance curve
Outlet connection Clamp ISO 2852, 2 ½”
Air connection ½” BSP
Max discharge pressure 8 bar
Max air pressure 8 bar
Volume per stroke 2300 ml
Temperature range -20.... +110°C
Weight 35 kg
ATEX Available Upon Request
Notes Special Executions Available Upon Request
Connections Special Executions Available Upon Request
Technical datasheet and material specification We hereby confirm that below mentioned product conform to the technical specification shown in this document.
Identification Model No T800 Description 3” diaphragm pump
Serial No -
Materials and specifications
Part description and part No Material Options
Housings (wetted, pos 11) PE / PTFE
In/outlets (wetted, pos 13) PE / PTFE / AISI 316L Diaphragms (wetted, pos 15) PTFE / EPDM / NBR
Valve balls (wetted, pos 23) EPDM / PTFE / FKM / NBR / Polyurethane / AISI 316L / Ceramic / SiC
Valve seats (wetted, pos 20, 21) PTFE / Polyurethane / AISI 316
Spacer sleeve (wetted, pos 19) PE / PTFE / AISI 316L
Centre block (not wetted) PP
Air valve (not wetted) Brass/NBR Brass/EPDM Brass/FKM AISI 316L/FKM PET / FKM
General data Inlet connection Flanged DIN DN80 General performance curve
Outlet connection Flanged DIN DN80
Air connection 1/2” BSP (female)
Max discharge pressure 8 bar
Max air pressure 8 bar
Volume per stroke 5125 ml
Temperature Max 70°C
Weight 140 kg
Atex Available upon request
Noise data Less than 80 dB (A)
Notes Special executions on request
Connections Special executions on request
Technical datasheet and material specification
We hereby confirm that below mentioned product conform to the technical specification shown in this document.
Identification
Model No T825 STT-3DA
Description 3” air operated diaphragm pump in stainless steel
Materials and specifications
Part description and part No Material Options Housings (wetted, pos 11) Stainless steel AISI 316L
In/outlets (wetted, pos 13) Stainless steel AISI 316L
Diaphragms (wetted, pos 15) EPDM / PTFE / NBR / White EPDM / White PTFE
Valve balls (wetted, pos 23) EPDM / PTFE / NBR / Polyurethane / Stainless steel AISI 316L
Valve seats (integrated in pos 11 and 13) Stainless steel AISI 316L Centre block (not wetted) PP (polypropylene)
Air valve (not wetted) Brass/NBR Brass/EPDM Brass/FKM AISI316L/FKM PET/FKM
General data
Inlet connection DN80 DIN 11864-1 Form A nut connection
General performance curve
Outlet connection DN80 DIN 11864-1 Form A nut connection
Air connection ½”
Max discharge pressure 8 bar
Max air pressure 8 bar
Temperature range -20°C .... +110°C
Weight 140 kg
Dimensions (L x W x H) 750 x 760 x 1341 mm
ATEX Available Upon Request
Notes Special Executions Available Upon Request
Connections Special Executions Available Upon Request
Technical datasheet and material specification We hereby confirm that below mentioned product conform to the technical specification shown in this document.
Identification Model No TR9 Description 1/4” diaphragm pump
Serial No -
Materials and specifications
Part description and part No Material Options
Housings (wetted, pos 11) PE / PTFE In/outlets (wetted, pos 13) PE / PTFE / AISI 316L
Diaphragms (wetted, pos 15) PTFE / EPDM / NBR
Rod valves (wetted, pos 20, 21) PE / PTFE
Spacer sleeve (wetted, pos 19) PE / PTFE
Centre block (not wetted) PP Air valve (not wetted) Brass / Stainless / PET
General data Inlet connection General performance curve
Outlet connection
Air connection Thread 1/8” BSP (female)
Max discharge pressure 8 bar
Max air pressure 8 bar
Volume per stroke 13 ml
Temperature range -20°C.... +110°C
Weight 1.6 kg
Atex Available upon request
Noise data Less than 80 dB (A)
Notes Special executions on request
Connections Special executions on request
Technical datasheet and material specification We hereby confirm that below mentioned product conform to the technical specification shown in this document.
Identification Model No TR20 Description 3/8” diaphragm pump
Serial No -
Materials and specifications
Part description and part No Material Options
Housings (wetted, pos 11) PE / PTFE In/outlets (wetted, pos 13) PE / PTFE / AISI 316L
Diaphragms (wetted, pos 15) PTFE / EPDM / NBR
Rod valves (wetted, pos 20, 21) PE / PTFE
Spacer sleeve (wetted, pos 19) PE / PTFE
Centre block (not wetted) PP Air valve (not wetted) Brass / Stainless / PET
General data Inlet connection Thread 3/8” BSP (female) General performance curve
Outlet connection Thread 3/8” BSP (female)
Air connection Thread 1/8” BSP (female)
Max discharge pressure 8 bar
Max air pressure 8 bar
Volume per stroke 50 ml
Temperature range -20°C.... +70°C
Weight 1.5 kg
Atex Available upon request
Noise data Less than 80 dB (A)
Notes Special executions available upon request
Connections Special executions on request
Technical datasheet and material specification We hereby confirm that below mentioned product conform to the technical specification shown in this document.
Identification Model No TX25
Description ½” air operated diaphragm pump Serial No -
Materials and specifications
Part description and part No Material Options
Housings Aluminium / Cast Iron / PTFE Coated Aluminium
In/outlets Aluminium / AISI 316L / Cast Iron
Diaphragms PTFE / EPDM / NBR
Valve balls PTFE / EPDM / NBR
Valve seats (integrated in housings) Stainless steel AISI 316
Centre block (not wetted) Aluminium / Cast Iron / PTFE Coated Aluminium
Air valve (not wetted) Brass/NBR Brass/EPDM Brass/FKM
General data Inlet connection 1/2” BSP (female) General performance curve
3” BSP (female) 1/2” BSP (female)
Air connection 1/8”
Max discharge pressure 8 bar
Max air pressure 8 bar
Temperature range -20°C .... +110°C
Weight 2 kg
ATEX details EX-proof according to ATEX group II, cat 2, T4
Notes Special executions on request
Connections Special executions on request
Technical datasheet and material specification We hereby confirm that below mentioned product conform to the technical specification shown in this document.
Identification Model No TX70 Description 3/4” air operated diaphragm pump
Serial No -
Materials and specifications
Part description and part No Material Options
Housings Aluminium / Stainless / Cast Iron / PTFE Coated Aluminium
In/outlets Aluminium / AISI 316L / Cast Iron
Diaphragms PTFE / PTFE 1705B / EPDM / NBR / FKM
Valve balls PTFE / EPDM / NBR / FKM / Polyurethane / AISI 316L / Ceramic
Valve seats (integrated in housings) Stainless steel AISI 316
Centre block (not wetted) Aluminium / Cast Iron / PTFE Coated Aluminium
Air valve (not wetted) Brass/NBR Brass/EPDM Brass/FKM AISI 316L / FKM PET / FKM
General data Inlet connection 3/4” BSP (female) General performance curve
3” BSP (female) 3/4” BSP (female)
Air connection ¼”
Max discharge pressure 8 bar
Max air pressure 8 bar
Temperature range -20°C .... +110°C
Weight 5 kg
Dimensions (L x W x H) 150 x 168 x 229 mm
ATEX details EX-proof according to ATEX group II, cat 2, T4
Notes Special Executions available upon request
Connections Special Executions available upon request
Technical datasheet and material specification We hereby confirm that below mentioned product conform to the technical specification shown in this document.
Identification Model No TX120
Description 1” air operated diaphragm pump
Serial No -
Materials and specifications
Part description and part No Material Options
Housings Aluminium / Stainless / Cast Iron / PTFE Coated Aluminium
In/outlets Aluminium / AISI 316L / Cast Iron
Diaphragms PTFE / PTFE 1705B / EPDM / NBR
Valve balls PTFE / EPDM / NBR / FKM / Polyurethane / AISI 316L / Ceramic
Valve seats (integrated in housings) Stainless steel AISI 316
Centre block (not wetted) Aluminium / Cast Iron / PTFE Coated Aluminium
Air valve (not wetted) Brass/NBR Brass/EPDM Brass/FKM AISI 316L / FKM PET / FKM
General data Inlet connection 1” BSP (female) General performance curve
3” BSP (female) 1” BSP (female)
Air connection ¼”
Max discharge pressure 8 bar
Max air pressure 8 bar
Temperature range -20°C .... +110°C
Weight 8 kg
Dimensions (L x W x H) 200 x 195 x 302 mm
ATEX details EX-proof according to ATEX group II, cat 2, T4
Notes Special executions available upon request
Connections Special Executions available upon request
Technical datasheet and material specification We hereby confirm that below mentioned product conform to the technical specification shown in this document.
Identification Model No TX220 Description 1 ½” air operated diaphragm pump
Serial No -
Materials and specifications
Part description and part No Material Options
Housings Aluminium / Stainless / Cast Iron / PTFE Coated Aluminium
In/outlets Aluminium / AISI 316L / Cast Iron
Diaphragms PTFE / PTFE 1705B / EPDM / NBR
Valve balls PTFE / EPDM / NBR / FKM / Polyurethane / AISI 316L
Valve seats (integrated in housings) Stainless steel AISI 316 Centre block (not wetted) Aluminium / Cast Iron / PTFE
Coated Aluminium
Air valve (not wetted) Brass/NBR Brass/EPDM Brass/FKM AISI 316L / FKM PET / FKM
General data Inlet connection 1 ½” BSP (female) General performance curve
Outlet connection 1 ½” BSP (female)
Air connection ½”
Max discharge pressure 8 bar
Max air pressure 8 bar
Volume per stroke 933 ml
Temperature range -20°C .... +80°C
Weight 19 kg
Dimensions (L x W x H) 270 x 265 x 412 mm
ATEX details EX-proof according to ATEX group II, cat 2, T4
Notes Special executions available upon request
Connections Special executions available upon request
Technical datasheet and material specification We hereby confirm that below mentioned product conform to the technical specification shown in this document.
Identification Model No TX420
Description 2” air operated diaphragm pump
Serial No -
Materials and specifications
Part description and part No Material Options
Housings Aluminium / Stainless / Cast Iron / PTFE Coated Aluminium
In/outlets Aluminium / AISI 316L / Cast Iron
Diaphragms PTFE / PTFE 1705B / EPDM / NBR Valve balls PTFE / EPDM / NBR / FKM /
Polyurethane / AISI 316L
Valve seats (integrated in housings) Stainless steel AISI 316
Centre block (not wetted) Aluminium / Cast Iron / PTFE Coated Aluminium
Air valve (not wetted) Brass/NBR Brass/EPDM Brass/FKM AISI 316L / FKM PET / FKM
General data Inlet connection 2” BSP (female) General performance curve
Outlet connection 2” BSP (female)
Air connection ½”
Max discharge pressure 8 bar
Max air pressure 8 bar
Volume per stroke 2300 ml
Temperature range -20°C.... +80°C
Weight 37 kg
Dimensions (L x W x H) 350 x 342 x 537 mm
ATEX details EX-proof according to ATEX group II, cat 2, T4
Notes Special executions available upon request
Connections Special executions available upon request
Technical datasheet and material specification
We hereby confirm that below mentioned product conform to the technical specification shown in this document.
Identification
Model No TX820
Description 3” air operated diaphragm pump
Serial No -
Materials and specifications
Part description and part No Material Options
Housings Aluminium / Stainless
In/outlets Aluminium / AISI 316L Diaphragms PTFE / EPDM / NBR
Valve balls PTFE / EPDM / NBR / Polyurethane
Valve seats (integrated in housings) Stainless steel AISI 316
Centre block (not wetted) Aluminium / PP
Air valve (not wetted) PET / NBR / Brass Shaft PAT / FKM / S/S Shaft
General data
Inlet connection 3” BSP (female) General performance curve
Outlet connection 3” BSP (female)
Air connection ½”
Max discharge pressure 8 bar
Max air pressure 8 bar
Temperature range -20°C .... +100°C
Weight 97 kg
Dimensions (L x W x H) 470 x 530 x 833 mm
ATEX details EX-proof according to ATEX group II, cat 2, T4
Notes Special executions available upon request
Connections Special executions available upon request