TECHNICAL DATA SMS LOW PROFILE BALLASTED SYSTEM...USA Solar Mounting Solutions 75 Pierces Road,...

1
Solar Mounting Solutions 75 Pierces Road, Newburgh, NY 12550 USA www.sms.solar Phone: 845.565.6363 FAX: 845.565.3709 Email: [email protected] TECHNICAL DATA FEATURES SMS LOW PROFILE BALLASTED SYSTEM Average 50% faster to install than any other rack Rack arrives direct from factory with all hardware pre-inserted Integrated wire management system™ Ballast protected from environment and contained per code Low profile design equals less ballast blocks Single tool installation EPDM rubber strips are pre-applied Available in Galvanized Steel/Aluminum/Painted (powder coated) Made in New York State, USA Preferred rack by solar installers TEST/CERTIFICATIONS CALCULATIONS MATERIAL Class A Fire Rating Tested ETL/UL Listed Grounding Components 50 PSF Snow Load Rated Wind Tunnel Simulation Tested G90 Coated 20 Year Warranty / 25 Year Available 3rd party structural PE stamped drawing and calculations Main Rack Component: G90 Galvanized Steel Main Grounding Component: Stainless Steel Hardware pre-install: Nickel Coated All materials are manufactured, assembled and tested for quality, mechanical strength and electrical bonding at our New York facility. HIGHER NET PROFITS INTEGRATED WIRING CODE COMPLIANT CUSTOM DESIGNS MADE IN THE USA

Transcript of TECHNICAL DATA SMS LOW PROFILE BALLASTED SYSTEM...USA Solar Mounting Solutions 75 Pierces Road,...

Page 1: TECHNICAL DATA SMS LOW PROFILE BALLASTED SYSTEM...USA Solar Mounting Solutions 75 Pierces Road, Newburgh, NY 12550 Phone: 845.565.6363 FAX: 845.565.3709 Email: info@sms.solar TECHNICAL

Solar Mounting Solutions75 Pierces Road, Newburgh, NY 12550USA

www.sms.solarPhone: 845.565.6363FAX: 845.565.3709Email: [email protected]

T E C H N I C A L D ATA

F E AT U R E S

SMS LOW PROFILEBALLASTED SYSTEM

Average 50% faster to install than any other rack

Rack arrives direct from factory with all hardware pre-inserted

Integrated wire management system™

Ballast protected from environment and contained per code

Low profile design equals less ballast blocks

Single tool installation

EPDM rubber strips are pre-applied

Available in Galvanized Steel/Aluminum/Painted (powder coated)

Made in New York State, USA

Preferred rack by solar installers

TEST/CERTIFICATIONS CALCULATIONS

MATERIAL

Class A Fire Rating Tested

ETL/UL Listed Grounding Components

50 PSF Snow Load Rated

Wind Tunnel Simulation Tested

G90 Coated 20 Year Warranty / 25 Year Available

3rd party structural PE stamped drawing and calculations

Main Rack Component: G90 Galvanized Steel

Main Grounding Component: Stainless Steel

Hardware pre-install: Nickel Coated

All materials are manufactured, assembled and tested for quality, mechanical strength and electrical bonding at our New York facility.

H I G H E R N E T P R O F I T S I N T E G R A T E D W I R I N G C O D E C O M P L I A N T C U S T O M D E S I G N S M A D E I N T H E U S A