TECHNICAL DATA SHEET - rapidwashrooms.com Soap... · SOAP SPECIFICATION Soap Compatibility Foaming...
Transcript of TECHNICAL DATA SHEET - rapidwashrooms.com Soap... · SOAP SPECIFICATION Soap Compatibility Foaming...
TECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEETTECHNICAL DATA SHEET
Manufactured by Rapid Washrooms Limited2 Relay Road, Waterlooville, Hampshire, PO7 7XA
DISPENSER SPECIFICATION
Materials:Solid 316 Stainless Steel - Marine Grade
FinishSateen (Optional scratch resistant PVD coating)
Weight1.4Kg
Mounting StylesWall and counter mounted options
Mounting Hole Size26mm diameter
Deck / Wall Thickness38mm (Max)
Anti-RotationFeatures anti-rotation technology
MaintenanceAll maintenance performed from the front of unit following installation
191mm
60mm 134mm57mm
38mm MAX
30mm
184mm
123mm
57mm38m
m M
AX
TECHNICAL DATA SHEET
Manufactured by Rapid Washrooms Limited2 Relay Road, Waterlooville, Hampshire, PO7 7XA
WORKING SPECIFICATION
Mains Power Supply:100-240V AC / 50-60Hz
Operating Voltage12V DC
Maximum Load600mA @ 12VDC
Working Load300mA @ 12VDC
Working Temperature5 - 55°�C
Sensor50 - 250mm Range (Pre-set to 50mm)
ApprovalsCE
Dose Size0.30 - 1.25ml per activation
Installation DistancesPump to dispenser - 3m Max , Pump to reservoir - 5m Max
Wall MountingSnap fit, quick release wall bracket included
Online ConnectivityWiFi, LoRaWAN, GSM
Data FeedbackAverage consumption, Predicted replenishment, Live consumable level feedback, Remote access to settings, Peak time analysis, Activation count, Email alerts
Online Security ProtocolsLocal access + key combination required to launch portal, SSL encryption, SHA256 hash encryption
WarrantyContract Dependant (2 year - unlimited)
140mm
35mm 120mm
TECHNICAL DATA SHEET
Manufactured by Rapid Washrooms Limited2 Relay Road, Waterlooville, Hampshire, PO7 7XA
SOAP SPECIFICATION
Soap CompatibilityFoaming Soap Only
Recommended SoapRapid Foaming Soap (Other soaps must be verified)
Soap Storage Capacity5L, 10L containers
5 LitreHeight 195mm
Plan: 200mm x 200mmWeight 5kg
10 LitreHeight 264mm
Plan: 285 x 245mmWeight 10kg
Up to 16,500 Handwashes
Up to 33,000 Handwashes
Multi-Feed Compatible Individual-Feed Compatible
Manufactured by Rapid Washrooms Limited2 Relay Road, Waterlooville, Hampshire, PO7 7XA
TECHNICAL DATA SHEET
INSTALLATION REQUIREMENTS & IMPORTANT INFORMATION
Sinks/WallsAppropriate for any sink or wall with a 26mm mounting hole and a maximum material thickness of 38mm.
Recommended Soap Rapid Washrooms Soap. Alternative soaps must be verifi ed for compatibility.
Soap Reservoir PositionPlease see the below diagram that shows appropriate mounting positions.
Set up of Soap DispenserThe Soap Dispenser is delivered ready to use, if you wish to change any of the settings of the Soap Dispenser you can do so via the UI on the dispenser.
PowerTransformer supplied with 2 core cable with stripped ends. Recommended to hard-wire to spur. Check your buildings requirements.
Soap Head should be mounted no further than 500mm away from the Soap Dispenser
Total length of power leads is 3.5m
Reservoir should be mounted no further than 5m away from the Soap Dispenser
Soap Dispenser must be mounted no higher than 1m from the reservoir