Technical collection - Isoone...Technical collection ISOONE, La Manufacture de France 18 rue Jean...
Transcript of Technical collection - Isoone...Technical collection ISOONE, La Manufacture de France 18 rue Jean...
Technical collection
ISOONE, La Manufacture de France18 rue Jean Monnet31240 SAINT-JEAN
Tel . +33 5 62 89 23 22Fax. +33 5 62 89 23 29
Mail : [email protected] : www.isoone.eu
May 2018
LA MANUFACTURE DE FRANCE
AN ERp CoMpUTER sysTEM To MANAgE ThE pRoDUCTioN AND TRACEAbiLiTy oF ThE CoMpoNENTs UsED.
Layout of the ground floor where the mechanical and isolated assembly workshops are located.
BUREAUX
AUVENTCHARGEMENT / DÉCHAGEMENT
POUBELLES
RDC800 m2
LOCA
LIN
FORM
ATIQ
UEVE
STIA
IRE
StockComposants
Coupe �ls
StockMaintenance
Auvent ext.
ATELIER MÉCANIQUE
Soudure / brasage
SablagePolissage
Centre usinage 4 axes
Cisaille
Presses
Poinçonneuse
Presse plieuse
Nettoyage chimique
Stock matières premières
Coudeuse
Découpe et fabrication de cadres alu.
ATELIER CABLAGE / ASSEMBLAGELuminaires techniques et salle blanche
RECEPTIONS EXPEDITION
LocalSocialValidation
électriques et techniques
H2OCO2
H2O
H2OCO2
H2OCO2
EVAC
UATI
ON
FUM
ÉES
RFT_2
La Manufacture de France
In 1940, a few years after their arrival from Italy, François Colombo and his two eldest sons, Gino and Tino, found-ed SEAE. It is by following the tech-nological evolution that the company discovered the electric welding with the stick, a revolution for a blacksmith. Then the fluorescent lighting opened the way to the mass industry. SEAE entered in general lighting, grew and exported, it’s the 70’s and 80’s. At the dawn of the 2010s the mass industrial model was no longer sustainable, a new technology came out : LED. It was time to re-invent the model so the family sold the activity of production of fluorescent lighting in 2013 .
In 2016, Corinne and Frédéric Colom-bo, Tino’s grandchildren founded La Manufacture de France SAS. The goal? Perpetuate the family tradition in a sustainable model in France, allowing to maintain a local manufacture. The shareholding remains 100% family. A
workshop was created in the outskirts of Toulouse where digital machines and craft techniques are working together, a fascinating program!
The model changed but the profes-sion continues, The Manufacture de France is specialized in the design and manufacture of very specific lumi-naires: art chandelier under the mark of MAELIS and cleanroom luminaires with ISOONE, because technique is never far from art.
THE STORY
RADIUM by SEAE.
ISOONE is a trademark of La Manu-facture de France SAS, specialized in the design and manufacture of clean room lighting systems.
The choice of the ultra-cleanliness area was quite natural, forty years ago we designed, at the time of SEAE, the first luminaires for illu-minating cleanrooms, the famous BATDX.
BATDX by SEAE, the first cleanroom luminaire. 1980.
Later we created Radium and Iridi-um, the best runners in cleanroom lighting ... Over the years, we have learned to master the constraints to illuminate these so specific spaces. Light sources have evolved, power systems and the needs related to contamination control too. In order to continue innovating in the field of cleanroom lighting, we felt it was es-sential to focus on it, this is the pur-pose of ISOONE, created to meet the specifics needs of ultra-clean environments users.It is therefore with knowledge and with our sensibility of lighting designer that we want to create the luminaires of the future, to illuminate the industries of the future. So our products qualities give add-ed value to those of our customers.
ISOONE, The most innovating brand in cleanroom lighting. With its innovative and adapted products, ISOONE naturally stands out as THE reference brand in the field of cleanroom lighting. This is evidenced by the number of users who have already validated and used our products in France and abroad where 40% of the production is exported since our founding date in 2016. At this date the main projects where ISOONE luminaires have been selected are (in progress or ended) : Laboratorios CALIER - Spain (Salmonella vaccine), ISREC - Switzerland (cancer research), BOERHINGER Respimat - Spain (Bronchodilator), GRIFOLS Dublin - Ireland (purification plant for the protein albumin), Instectarium de L’UNIVERSITÉ DE STRASBOURG - France, SAINT-GOBAIN - Mexico (securit glass). Many other customers have already choosed our fixtures fer new or revamping installations :
RFT_3
RECESSED ACCESS FROM BELOW IP65
RECESSED ACCESS FROM ABOVE IP65
Xe54LED Recessed luminaires with micro-prismatic polycarbonate plate. LED PCB source exclusively, allowing to obtain L90B10 at 50,000h, a colour rendering higher than 85 (90 on request) and a UGR lower than 19. High power to be suitable for operating theatres.
IP65 IK08 960º9010
INNOVATION
Ir77LED Recessed luminaires. Installation in modular false ceilings or continuous false ceilings to be cut. PMMA or PC opal plate. Wide range of powers and dimensions.
IP65
Sumary
BATDXRecessed luminaires with top and bottom access with compact dimensions: 390x390 mm or 205x390 mm. New generation LED product, intensive or exten-sive distribution of light, large range of emitted flows allowing, in particular, to illuminate high-rise buildings...
IP65 IK08OPPC
960ºOPPC3
ISO
INNOVATION IK07OPMI
650ºOPMIPage 12
Ra88 HLED Recessed luminaires with low glare optics in vacuum metallised glossy alu-minium and tempered glass. Wide range of powers and dimensions.
IP65 IK08 960º3ISO8 1
60.000hPage 18
Ir77 HLED Recessed luminaires with PMMA or PC opal plate. Wide range of powers and dimensions.
IP653ISO
Page 21
DRACOLED Recessed luminaire with compact dimensions, 390x390 mm or 210x390 mm. New generation LED product, intensive or extensive distribution of light, large range of emitted flows allowing, in particular, to illuminate high-rise build-ings.
IP654 ISO
INNOVATION
Page 24
Ra88LED Recessed luminaires. Installation in modular false ceilings or continuous false ceilings to be cut. Very low glare optics in vacuum metallised glossy alu-minium and tempered glass, UGR lower than 19. Wide range of powers and dimensions.
IP65 IK08 960ºPage 28
Page 31
Page 34
MARSRecessed luminaires with top access with compact dimensions: 390x390 mm or 240x390 mm. New generation LED product, intensive or extensive distribution of light, large range of emitted flows allowing in particular to illuminate high-rise buildings.
IP653ISO
INNOVATION IK07OPMI
650ºOPMIPage 15
IK08OPPC
960ºOPPC
IK07OPMI
650ºOPMI
IK08OPPC
960ºOPPC8 1
60.000h
8 160.000h
8 160.000h
4 ISO
4 ISO
4 ISO
IK07OPMI
650ºOPMI
IK08OPPC
960ºOPPC
IK07OPMI
650ºOPMI
IK08OPPC
960ºOPPC
WALKABLE
WALKABLE
RFT_4
REVAMP and TAILORED SOLUTIONS
LES SAILLIS
SIRIUS
IP65
Low profile surface mounted luminaires for PCB LEDs, integrated driver in the body. Opal plate in pmma (OPMI) or polycarbonate (OPPC). Very homogene-ous lighting.
IP65
ETOGIP66 surface mounted waterproof luminaires with LED source. Polycarbonate body extruded grey and clear by bi-injection process, grey glued tips. Available in two lengths, high flux.
IP66 IK08 960º
LEDETOGCompact, IP66 flooded waterproof luminaires with LED source. EN-47100 al-uminium alloy body lacquered RAL 7035, diffusers in polycarbonate (PCI) or acrylic (MI). Suitable for a wide range of ambient temperatures, from -30ºC to + 45ºC. Version with acrylic plate (MI) particularly suitable for use in chemically aggressive environments.
IP66 IK08 960º
-30ºC >> +45ºC
IP66
PANEL LED
IDA
IP20/54
IP40 panel LED. White lacquered aluminium frame. External power supply. Mi-cro-prismatic diffuser to obtain a UGR lower than 19. Optional surface mounting accessories.
IK06 650ºOPMI
IP20/40
H1 IP65IP65 panel LED from above and below, welded aluminium frame. For surface mounting, fixing by threaded rods, clipping or direct screwing on the support. Available in combined safe-light, white 4000 K / red 630 nm and yellow 580 - 600 nm.
20IP40
IK06 650ºOPMI
Page 37
Page 39
Page 50
Page 52
Page 54
IP655 ISO
5 ISO IK07
OPMI650º
OPMIIK08
OPPC960º
OPPC
1552
352
1476,60
270
AUTEUR
VERIF.
APPR.
FAB.
QUAL.
SAUF INDICATION CONTRAIRE:LES COTES SONT EN MILLIMETRESETAT DE SURFACE:TOLERANCES: LINEAIRES: ANGULAIRES:
FINITION:
NOM SIGNATURE DATE
MATERIAU:
NE PAS CHANGER L'ECHELLE REVISION
TITRE:
No. DE PLAN
ECHELLE:1:10 FEUILLE 1 SUR 1
A3Matériau <non spécifié>
N/D
Nº de Plan
FC 13-02-18
SP_LU_17091
ISOSPE E17 091
A A
B B
C C
D D
E E
F F
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
FC000000
Epaisseur (mm): 10/10
1
Dossier de rangement :
SP - Spéciaux
3,36Surface (m2)
Sauf indication contraire les cotes de pliage sont toujours EXTÉRIEURES
La Manufacture de France SAS
SP_LU_17091FICHIER
590
630
630
630
630
471
471
AUTEUR
VERIF.
APPR.
FAB.
QUAL.
SAUF INDICATION CONTRAIRE:LES COTES SONT EN MILLIMETRESETAT DE SURFACE:TOLERANCES: LINEAIRES: ANGULAIRES:
FINITION:
NOM SIGNATURE DATE
MATERIAU:
NE PAS CHANGER L'ECHELLE REVISION
TITRE:
No. DE PLAN
ECHELLE:1:5 FEUILLE 1 SUR 1
A3Matériau <non spécifié>
N/D
Nº de Plan
FC 04-02-17
SP_LU_16007
ISOSPE 16007
A A
B B
C C
D D
E E
F F
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
FC000000
Epaisseur (mm): ND
2
Dossier de rangement :
SP - Spéciaux
4,02Surface (m2)
Sauf indication contraire les cotes de pliage sont toujours EXTÉRIEURES
La Manufacture de France SAS
SP_LU_16007FICHIER
100 mm MAX.
Page 11
RFT_5
RECESSED LUMINAIRES RECESSED LUMINAIRES
ACCES from ABOVE ACCESS from BELOW
RANGE NAME BATDX MiniLed MARS Ra88 HLED / HT5 Ir77 HLED / HT5 DRACO Ra88 LED / T5 Ir77 LED / T5 Xe54
PHOTO
DESCRIPTION
Compact, lightweight, powerful and walkable luminaire. Suitable for any type of room.
Compact, lightweight, powerful and walkable luminaire. Suitable for any type of room.
Low glare luminaire and tempered protection glass.
Recessed luminaire with opal pmma or polycar-bonate optics.
Compact, lightweight and powerful luminaire. Suitable for any type of room.
Low glare luminaire and tempe-red protection glass.
Recessed luminaire with opal pmma or polycarbonate optics.
Suitable for operating theaters, IRC greater than 90.
MOUNTING Recessed Recessed Recessed Recessed Recessed Recessed Recessed Recessed
MAINTENANCE ACCESS UP and DOWN UP UP UP DOWN DOWN DOWN DOWN
CEILING
Continuous false ceilings sandwich-type
from 15 to 100 mm thick
Continuous false ceilings sandwich-type
from 15 to 100 mm thick
Continuous false ceilings sandwich-type
from 15 to 100 mm thick
Continuous false ceilings sandwich-type from 15
to 100 mm thick
Continuous false ceiling to bu cut from 13 tp 80 mm thickness
Modular false ceiling and conti-nuous false ceiling to bu cut from
13 tp 80 mm thickness
Modular false ceiling and conti-nuous false ceiling to bu cut from
13 tp 80 mm thickness
Continuous false ceiling to bu cut from 13 tp 60 mm thickness
SOURCE LED LED LED ou T5 LED ou T5 LED LED ou T5 LED ou T5 LED
LIFETIME (LED) L80 B10 at 50.000 hL70 B20 at 70.000 h
L80 B10 at 50.000 hL70 B20 at 70.000 h
L80 B10 at 60.000 hL70 B20 at 80.000 h
L80 B10 at 60.000 hL70 B20 at 80.000 h
L80 B10 at 50.000 hL70 B20 at 70.000 h
L80 B10 at 60.000 hL70 B20 at 80.000 h
L80 B10 at 60.000 hL70 B20 at 80.000 h L90 B10 at 50.000 h
IP IP65 IP65 IP65 IP65 IP65 IP65 IP65 IP65
IK IK07 / IK08 IK07 / IK08 IK08 IK07 / IK08 IK07 / IK08 IK08 IK07 / IK08 IK08
GLOW WIRE TEST 650º ou 960º 650º ou 960º 960º 650º ou 960º 650º ou 960º 960º 650º ou 960º 960º
ISO ISO 3 ISO 3 ISO 3 ISO 3 ISO 4 ISO 4 ISO 4 ISO 4
DIMENSIONS (mm) 390x205 / 390x390 390x240 / 390x390 665x300, 665x515, 1305x300, 1605x300
665x300, 665x515, 1305x300 390x210, 390x390 597x297, 597x597, 1197x297,
1497x297597x297, 597x597,
1197x297, 1497x298 1197x200, 1497x200
WEIGHT 5,5 Kg or 7 Kg 4,5 Kg or 6 Kg 9 Kg / 13 Kg / 17 Kg 8 Kg / 11 Kg / 15 Kg 2,5 Kg or 4,5 Kg 6 Kg / 8,5 Kg / 10 Kg 6 Kg / 8 Kg / 9,5 Kg 7 Kg / 8 Kg
EMITTED FLOW (LED) 1450 to 5300 Lm 1450 to 9300 Lm 3200 to 8000 Lm 2000 to 7000 Lm 1450 to 9300 Lm 3200 to 8000 Lm 2000 to 7000 Lm 6500 to 8200 Lm
POWER (LED) 14 to 48 W 14 to 89 W 32 to 81 W 32 to 80 W 14 to 89 W 32 to 81 W 32 to 80 W 35 to 65 W
LUMEN/W (LED) Up to 130 Lm/W Up to 130 Lm/W Up to 106 Lm/W Up to 85 Lm/W Up to 130 Lm/W Up to 106 Lm/W Up to 85 Lm/W Up to 110 Lm/W
OPTICS
Opal polycarbonate or Opal pmma (per-spex). Micro-prism polycarbonate or glass.
Intensive 30 °, In-tensive 60 °, Opal p o l y c a r b o n a t e , Opal pmma or mi-cro-prism
Safety glass and low luminance louver
Opal polycarbonate or opal pmma
Intensive 30 °, Intensive 60 °, Opal polycarbonate, Opal pmma or micro-prism
Safety glass and low lumi-nance louver
Opal polycarbonate or opal pmma
Polycarbonate plate with mi-cro-prism
COLOUR TEMPERATURE (K) 4000°K (other on request)
4000°K (other on request)
4000°K (other on request)
4000°K (other on request)
4000°K (other on request)
4000°K (other on request)
4000°K (other on request)
4000°K (other on request)
IRC 85 85 85 85 85 85 85 90
WARRANTY 5 years 5 years 5 years 5 years 5 years 5 years 5 years 5 years
Walkable Walkable
RFT_6
RECESSED LUMINAIRES RECESSED LUMINAIRES
ACCES from ABOVE ACCESS from BELOW
RANGE NAME BATDX MiniLed MARS Ra88 HLED / HT5 Ir77 HLED / HT5 DRACO Ra88 LED / T5 Ir77 LED / T5 Xe54
PHOTO
DESCRIPTION
Compact, lightweight, powerful and walkable luminaire. Suitable for any type of room.
Compact, lightweight, powerful and walkable luminaire. Suitable for any type of room.
Low glare luminaire and tempered protection glass.
Recessed luminaire with opal pmma or polycar-bonate optics.
Compact, lightweight and powerful luminaire. Suitable for any type of room.
Low glare luminaire and tempe-red protection glass.
Recessed luminaire with opal pmma or polycarbonate optics.
Suitable for operating theaters, IRC greater than 90.
MOUNTING Recessed Recessed Recessed Recessed Recessed Recessed Recessed Recessed
MAINTENANCE ACCESS UP and DOWN UP UP UP DOWN DOWN DOWN DOWN
CEILING
Continuous false ceilings sandwich-type
from 15 to 100 mm thick
Continuous false ceilings sandwich-type
from 15 to 100 mm thick
Continuous false ceilings sandwich-type
from 15 to 100 mm thick
Continuous false ceilings sandwich-type from 15
to 100 mm thick
Continuous false ceiling to bu cut from 13 tp 80 mm thickness
Modular false ceiling and conti-nuous false ceiling to bu cut from
13 tp 80 mm thickness
Modular false ceiling and conti-nuous false ceiling to bu cut from
13 tp 80 mm thickness
Continuous false ceiling to bu cut from 13 tp 60 mm thickness
SOURCE LED LED LED ou T5 LED ou T5 LED LED ou T5 LED ou T5 LED
LIFETIME (LED) L80 B10 at 50.000 hL70 B20 at 70.000 h
L80 B10 at 50.000 hL70 B20 at 70.000 h
L80 B10 at 60.000 hL70 B20 at 80.000 h
L80 B10 at 60.000 hL70 B20 at 80.000 h
L80 B10 at 50.000 hL70 B20 at 70.000 h
L80 B10 at 60.000 hL70 B20 at 80.000 h
L80 B10 at 60.000 hL70 B20 at 80.000 h L90 B10 at 50.000 h
IP IP65 IP65 IP65 IP65 IP65 IP65 IP65 IP65
IK IK07 / IK08 IK07 / IK08 IK08 IK07 / IK08 IK07 / IK08 IK08 IK07 / IK08 IK08
GLOW WIRE TEST 650º ou 960º 650º ou 960º 960º 650º ou 960º 650º ou 960º 960º 650º ou 960º 960º
ISO ISO 3 ISO 3 ISO 3 ISO 3 ISO 4 ISO 4 ISO 4 ISO 4
DIMENSIONS (mm) 390x205 / 390x390 390x240 / 390x390 665x300, 665x515, 1305x300, 1605x300
665x300, 665x515, 1305x300 390x210, 390x390 597x297, 597x597, 1197x297,
1497x297597x297, 597x597,
1197x297, 1497x298 1197x200, 1497x200
WEIGHT 5,5 Kg or 7 Kg 4,5 Kg or 6 Kg 9 Kg / 13 Kg / 17 Kg 8 Kg / 11 Kg / 15 Kg 2,5 Kg or 4,5 Kg 6 Kg / 8,5 Kg / 10 Kg 6 Kg / 8 Kg / 9,5 Kg 7 Kg / 8 Kg
EMITTED FLOW (LED) 1450 to 5300 Lm 1450 to 9300 Lm 3200 to 8000 Lm 2000 to 7000 Lm 1450 to 9300 Lm 3200 to 8000 Lm 2000 to 7000 Lm 6500 to 8200 Lm
POWER (LED) 14 to 48 W 14 to 89 W 32 to 81 W 32 to 80 W 14 to 89 W 32 to 81 W 32 to 80 W 35 to 65 W
LUMEN/W (LED) Up to 130 Lm/W Up to 130 Lm/W Up to 106 Lm/W Up to 85 Lm/W Up to 130 Lm/W Up to 106 Lm/W Up to 85 Lm/W Up to 110 Lm/W
OPTICS
Opal polycarbonate or Opal pmma (per-spex). Micro-prism polycarbonate or glass.
Intensive 30 °, In-tensive 60 °, Opal p o l y c a r b o n a t e , Opal pmma or mi-cro-prism
Safety glass and low luminance louver
Opal polycarbonate or opal pmma
Intensive 30 °, Intensive 60 °, Opal polycarbonate, Opal pmma or micro-prism
Safety glass and low lumi-nance louver
Opal polycarbonate or opal pmma
Polycarbonate plate with mi-cro-prism
COLOUR TEMPERATURE (K) 4000°K (other on request)
4000°K (other on request)
4000°K (other on request)
4000°K (other on request)
4000°K (other on request)
4000°K (other on request)
4000°K (other on request)
4000°K (other on request)
IRC 85 85 85 85 85 85 85 90
WARRANTY 5 years 5 years 5 years 5 years 5 years 5 years 5 years 5 years
RFT_7
LED PANEL LED PANEL
SURFACE or RECESSED MOUNTING SURFACE or RECESSED ou MOUNTING
RANGE NAME H1 H1 / YE H1/ WR IDA 20/40
PHOTO
DESCRIPTIONUltra thin LED panel, IP65 on top and bottom sides, obtained thanks to the use of a special double seal profile.
Ultra thin LED panel, IP65 on top and bottom sides, obtained thanks to the use of a special double seal profile. Yellow safe-light 580 nm.
Ultra thin LED panel, IP65 on top and bottom sides, obtained thanks to the use of a special double joint profile. Red safe-light (620 nm) combined with white, two individuals circuits.
Ultra thin LED panel, IP20 above et IP40 below. aluminium body, microprism opal plate. Low glare.
MOUNTINGRecessed or surface mounted installation by direct clamping on the support (/ V), by 4 threaded rods
(/ TF) or by clipping (8 clips, version / C)
Recessed or surface mounted installation by direct clamping on the support (/ V), by 4 threaded rods (/ TF) or by clipping (8 clips,
version / C)
Recessed or surface mounted installation by direct clamping on the sup-port (/ V), by 4 threaded rods (/ TF) or by clipping (8 clips, version / C) Recessed
MAINTENANCE ACCESS Access from below for the panel and from above for power supply
Access from below for the panel and from above for power supply Access from below for the panel and from above for power supply Access from below
CEILINGLaminated panels (/ V and / TF)Metal panels (/ V, / TF and / C)
Modular ceilings T-bar (/ E)
Laminated panels (/ V and / TF)Metal panels (/ V, / TF and / C)
Modular ceilings T-bar (/ E)
Laminated panels (/ V and / TF)Metal panels (/ V, / TF and / C)
Modular ceilings T-bar (/ E)Modular ceilings T-bar
SOURCE LED LED LED LED
LIFETIME (LED) L80 B10 to 50.000 h L80 B10 to 50.000 h L80 B10 to 50.000 h L80 B10 to 50.000 h
IP IP65 IP65 IP65 IP20/40
IK IK06 IK06 IK06 IK06
GLOW WIRE TEST 650º 650º 650º 650º
ISO ISO 5 ISO 5 ISO 5 --
DIMENSIONS (mm) 298x298 598x598 1198x298 1498x298 598x598 598x598 597x597, 1197x297
WEIGHT 1,5 Kg 4,5 Kg 4,6 Kg 7,6 Kg 4,5 Kg 4,5 Kg 4,5 Kg
EMITTED FLOW (LED) 1500 Lm 4200 Lm 5150 Lm 7000 Lm 2800 Lm 4000 Lm (4000K) - 700 Lm (630 nm) De 3400 à 3785 Lm
POWER (LED) 18 W 36 W 54 W 80 W 40 W 36 W + 28 W 34 W
LUMEN/W (LED) 83 116 95 88 N/D N/D 100 Lm/W
OPTICS Reflective sheet with pmma light guide and diffu-sing film
Reflective sheet with pmma light guide and diffusing film
Reflective sheet with pmma light guide and diffusing film Reflective sheet with pmma light guide and diffusing film.
COLOUR TEMPERATURE (K) 4000°K 580 nm 4000°K + 620 nm 4000°K
IRC 80 -- -- 80
WARRANTY 3 years 3 years 3 years 3 years
RFT_8
LED PANEL LED PANEL
SURFACE or RECESSED MOUNTING SURFACE or RECESSED ou MOUNTING
RANGE NAME H1 H1 / YE H1/ WR IDA 20/40
PHOTO
DESCRIPTIONUltra thin LED panel, IP65 on top and bottom sides, obtained thanks to the use of a special double seal profile.
Ultra thin LED panel, IP65 on top and bottom sides, obtained thanks to the use of a special double seal profile. Yellow safe-light 580 nm.
Ultra thin LED panel, IP65 on top and bottom sides, obtained thanks to the use of a special double joint profile. Red safe-light (620 nm) combined with white, two individuals circuits.
Ultra thin LED panel, IP20 above et IP40 below. aluminium body, microprism opal plate. Low glare.
MOUNTINGRecessed or surface mounted installation by direct clamping on the support (/ V), by 4 threaded rods
(/ TF) or by clipping (8 clips, version / C)
Recessed or surface mounted installation by direct clamping on the support (/ V), by 4 threaded rods (/ TF) or by clipping (8 clips,
version / C)
Recessed or surface mounted installation by direct clamping on the sup-port (/ V), by 4 threaded rods (/ TF) or by clipping (8 clips, version / C) Recessed
MAINTENANCE ACCESS Access from below for the panel and from above for power supply
Access from below for the panel and from above for power supply Access from below for the panel and from above for power supply Access from below
CEILINGLaminated panels (/ V and / TF)Metal panels (/ V, / TF and / C)
Modular ceilings T-bar (/ E)
Laminated panels (/ V and / TF)Metal panels (/ V, / TF and / C)
Modular ceilings T-bar (/ E)
Laminated panels (/ V and / TF)Metal panels (/ V, / TF and / C)
Modular ceilings T-bar (/ E)Modular ceilings T-bar
SOURCE LED LED LED LED
LIFETIME (LED) L80 B10 to 50.000 h L80 B10 to 50.000 h L80 B10 to 50.000 h L80 B10 to 50.000 h
IP IP65 IP65 IP65 IP20/40
IK IK06 IK06 IK06 IK06
GLOW WIRE TEST 650º 650º 650º 650º
ISO ISO 5 ISO 5 ISO 5 --
DIMENSIONS (mm) 298x298 598x598 1198x298 1498x298 598x598 598x598 597x597, 1197x297
WEIGHT 1,5 Kg 4,5 Kg 4,6 Kg 7,6 Kg 4,5 Kg 4,5 Kg 4,5 Kg
EMITTED FLOW (LED) 1500 Lm 4200 Lm 5150 Lm 7000 Lm 2800 Lm 4000 Lm (4000K) - 700 Lm (630 nm) De 3400 à 3785 Lm
POWER (LED) 18 W 36 W 54 W 80 W 40 W 36 W + 28 W 34 W
LUMEN/W (LED) 83 116 95 88 N/D N/D 100 Lm/W
OPTICS Reflective sheet with pmma light guide and diffu-sing film
Reflective sheet with pmma light guide and diffusing film
Reflective sheet with pmma light guide and diffusing film Reflective sheet with pmma light guide and diffusing film.
COLOUR TEMPERATURE (K) 4000°K 580 nm 4000°K + 620 nm 4000°K
IRC 80 -- -- 80
WARRANTY 3 years 3 years 3 years 3 years
RFT_9
SURFACE MOUNTING
ACCESS FROM BELOW
RANGE NAME SIRIUS ETOG LEDETOG
PHOTO
DESCRIPTION
Surface mounted luminaire with integrated driver. Lacquered steel body of pyramidal shape. Aluminium frame.
Waterproof luminaire protrud-ing IP66 led. Tubular body with glued ends, installation from out-side by waterproof connector.
Projected waterproof lumi-naire. Body made of injected aluminium, condensation vent, extreme temperatures -30 ° C to + 45 ° C.
MOUNTING Surface Surface Surface
MAINTENANCE ACCESS Access from below Access from below Access from below
CEILING All non-flammable supports All non-flammable supports All non-flammable supports
SOURCE LED LED LED
LIFETIME (LED) L80 B10 at 50.000 h L80 B10 at 50.000 h L80 B10 at 50.000 h
IP IP65 IP66 IP66
IK IK07 / IK08 IK08 IK08
GLOW WIRE TEST 650º / 960º 850º 850º
ISO ISO-05 --- ---
DIMENSIONS (mm) 480x480, 1020x310 L = 640 / 1200 / 1480 L = 1047
WEIGHT 6 Kg
EMITTED FLOW (LED) 3300 to 3700 lm 2100 / 4000 / 5800 Lm 4200 to 6100 Lm
POWER (LED) 38 W 21 / 38 / 53 W 31 / 44 W
LUMEN/W (LED) 100 Lm/W 109 Lm/W 140 Lm/W
OPTICS Opal polycarbonate or opal pmma
Extruded polycarbonate opal tube
Opal injected diffuser in PMMA or PC
COLOUR TEMPERATURE (K) 4000°K 4000°K 4000°K
IRC 85 80 80
WARRANTY 5 years 3 years 5 years
RFT_10
REVAMP and TAILORED SOLUTIONS
Isoone advises you in order to find the best solutions you need for your project:
REVAMP
We can make an audit of your actual lighting solution to estimate the best revamp solution by calculating profitability solutions.
To revamp installations we can :
Design a new LED motor that can fit in your actual luminaire body, recovering the initial lighting level.
Design a new luminaire that can fit in the hole you have in your ceiling.
1.
2.
Example of a revamp kit for SEAE Radium H.Time to switch from fluo to LED : 15 min.No need to stop the cleanroom
TAILORED SOLUTIONS
For your new project or also to revamp, we can design special fitting. As this is a service for our cleanroom users customers we do not have minimum quantity. Our goal is to solve the problem to our customer.
With the input you can send to us, we make a complete 3D CAD model design that you can accept or change, then we use to make a cost sample before manufacturing the definitive serie.
590
630
630
630
630
471
471
AUTEUR
VERIF.
APPR.
FAB.
QUAL.
SAUF INDICATION CONTRAIRE:LES COTES SONT EN MILLIMETRESETAT DE SURFACE:TOLERANCES: LINEAIRES: ANGULAIRES:
FINITION:
NOM SIGNATURE DATE
MATERIAU:
NE PAS CHANGER L'ECHELLE REVISION
TITRE:
No. DE PLAN
ECHELLE:1:5 FEUILLE 1 SUR 1
A3Matériau <non spécifié>
N/D
Nº de Plan
FC 04-02-17
SP_LU_16007
ISOSPE 16007
A A
B B
C C
D D
E E
F F
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
FC000000
Epaisseur (mm): ND
2
Dossier de rangement :
SP - Spéciaux
4,02Surface (m2)
Sauf indication contraire les cotes de pliage sont toujours EXTÉRIEURES
La Manufacture de France SAS
SP_LU_16007FICHIER
100 mm MAX.
1552
352
1476,60
270
AUTEUR
VERIF.
APPR.
FAB.
QUAL.
SAUF INDICATION CONTRAIRE:LES COTES SONT EN MILLIMETRESETAT DE SURFACE:TOLERANCES: LINEAIRES: ANGULAIRES:
FINITION:
NOM SIGNATURE DATE
MATERIAU:
NE PAS CHANGER L'ECHELLE REVISION
TITRE:
No. DE PLAN
ECHELLE:1:10 FEUILLE 1 SUR 1
A3Matériau <non spécifié>
N/D
Nº de Plan
FC 13-02-18
SP_LU_17091
ISOSPE E17 091
A A
B B
C C
D D
E E
F F
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
FC000000
Epaisseur (mm): 10/10
1
Dossier de rangement :
SP - Spéciaux
3,36Surface (m2)
Sauf indication contraire les cotes de pliage sont toujours EXTÉRIEURES
La Manufacture de France SAS
SP_LU_17091FICHIER
RFT_11
RECESSED Cleanroom Luminaire
BATDX MiniLed
BATD
X_M
LED
ISO
ON
E-FT
-201
6-V2
-BAT
DX_
LED
_EN
.indd
- 18-
05-1
7-13
05
Technical sheet
TYPE OF PRODUCTWalk-on compact IP65 recessed led luminaire for cleanroom, access from above and from below. Large range of powers and optical solutions. Only adapted for self supported sand-wich panel.
MECHANICAL ENGINEERING1mm thickness steel body, white lacquered with polyester, classifi ed Qualicoat class 1 and GSB. Clamping frame in white lacquered steel, classifi ed Qualicoat class 1. 2mm alumini-um, red lacquered top cover, to be easily identifi able in the plenum space. Lower frame in extruded aluminium lacquered white, screwed on the body of the luminaire by 4 stainless steel screws.
LED MODULESZagha mid-power LED module, fi xed on a 2mm thickness aluminium plate for a better thermal management. 3 SDCM colour space, IRC above 85. Estimated lifetime L80B10 at 50.000h.
OPTICS- TRPC/30 : narrow spot optic (30º) applied directly on the pcb, clear polycarbonate diffuser- TRPC/60 : medium spot optic (60º) applied directly on the pcb, clear polycarbonate dif-fuser- OPPC : opal plate in PC. High mechanical resistance.- OPMI : opal plate in PMMA of high light transmission , perspex difuse 80. High chemical resistance.- MPPC : prismatic plate with diamond-like structure to reduce glare. UGR below 19.- MPVR : tempered laminated glass and internal micro-prism diffuser to reduce glare to achieve UGRs below 19. Excellent resistance to hydrogen peroxide.
CONTAMINATION CONTROLThe reduced level of retention and emission of particles obtained on this range of products allows their use in cleanrooms classifi ed up to ISO 3.A set of technical seals ensures the sealing, avoids the proliferation of bacteria and reduces the gas exchanges.
WEIGHT RESISTANCELuminaires designed and tested to resist the application of a mass of 100 Kg on the top cover corresponding to an accidental support of a person on the luminaire in the walkable plenum space.
H2O2 RESISTANCEComponents that can come into contact with hydrogen peroxide during the decontamina-tion process were tested by cyclic, direct and prolonged contact with a 35% H2O2 solution, see resistance in the table of references.
POWER SUPPLYLuminaires equipped with European branded full-fl ow electronic power supplies (EPF). Rat-ed voltage 240 V. DALI dimming (GDA) available as an option. Access to the equipment from above and below the fi xture.
TEMPERATURE AND HUMIDITYReference ambient temperature: 20ºC. Operating temperature range: 5 to 25ºC (the tem-perature affects the lifetime of the LEDs).For environments with a moisture content of more than 70%, we recommend the use of laquered INOX 304 for the body, as an option.
INSTALLATIONInstallation in false ceilings of high thickness from 15 to 100 mm. Adaptation possible for larger thicknesses, please consult us. Quick installation without luminaire opening.
WIRINGThrough a waterproof Wieland brand connector, RST20i on the top of the luminaire (fl exible H07RN-F 3G1,5mm2 cord mounting).
1/3
LED
IP65
CE
IK07OPMI
650ºOPMI
960ºPC/VR
3ISO
7 280.000h
IK08PC/VR
RFT_12
RECESSED Cleanroom Luminaire
BATDX MiniLed
BATD
X_M
LED
ISO
ON
E-FT
-201
6-V2
-BAT
DX_
LED
_EN
.indd
- 18-
05-1
7-13
05
Technical sheet
TYPE OF PRODUCTWalk-on compact IP65 recessed led luminaire for cleanroom, access from above and from below. Large range of powers and optical solutions. Only adapted for self supported sand-wich panel.
MECHANICAL ENGINEERING1mm thickness steel body, white lacquered with polyester, classifi ed Qualicoat class 1 and GSB. Clamping frame in white lacquered steel, classifi ed Qualicoat class 1. 2mm alumini-um, red lacquered top cover, to be easily identifi able in the plenum space. Lower frame in extruded aluminium lacquered white, screwed on the body of the luminaire by 4 stainless steel screws.
LED MODULESZagha mid-power LED module, fi xed on a 2mm thickness aluminium plate for a better thermal management. 3 SDCM colour space, IRC above 85. Estimated lifetime L80B10 at 50.000h.
OPTICS- TRPC/30 : narrow spot optic (30º) applied directly on the pcb, clear polycarbonate diffuser- TRPC/60 : medium spot optic (60º) applied directly on the pcb, clear polycarbonate dif-fuser- OPPC : opal plate in PC. High mechanical resistance.- OPMI : opal plate in PMMA of high light transmission , perspex difuse 80. High chemical resistance.- MPPC : prismatic plate with diamond-like structure to reduce glare. UGR below 19.- MPVR : tempered laminated glass and internal micro-prism diffuser to reduce glare to achieve UGRs below 19. Excellent resistance to hydrogen peroxide.
CONTAMINATION CONTROLThe reduced level of retention and emission of particles obtained on this range of products allows their use in cleanrooms classifi ed up to ISO 3.A set of technical seals ensures the sealing, avoids the proliferation of bacteria and reduces the gas exchanges.
WEIGHT RESISTANCELuminaires designed and tested to resist the application of a mass of 100 Kg on the top cover corresponding to an accidental support of a person on the luminaire in the walkable plenum space.
H2O2 RESISTANCEComponents that can come into contact with hydrogen peroxide during the decontamina-tion process were tested by cyclic, direct and prolonged contact with a 35% H2O2 solution, see resistance in the table of references.
POWER SUPPLYLuminaires equipped with European branded full-fl ow electronic power supplies (EPF). Rat-ed voltage 240 V. DALI dimming (GDA) available as an option. Access to the equipment from above and below the fi xture.
TEMPERATURE AND HUMIDITYReference ambient temperature: 20ºC. Operating temperature range: 5 to 25ºC (the tem-perature affects the lifetime of the LEDs).For environments with a moisture content of more than 70%, we recommend the use of laquered INOX 304 for the body, as an option.
INSTALLATIONInstallation in false ceilings of high thickness from 15 to 100 mm. Adaptation possible for larger thicknesses, please consult us. Quick installation without luminaire opening.
WIRINGThrough a waterproof Wieland brand connector, RST20i on the top of the luminaire (fl exible H07RN-F 3G1,5mm2 cord mounting).
1/3
LED
IP65
CE
IK07OPMI
650ºOPMI
960ºPC/VR
3ISO
7 280.000h
IK08PC/VR
BATDX MiniLed
BATD
X_LE
D
2/3
30°
60°
30°
60°
A
B
C C
D D
E E
F F
8
8
7
7
6
6
5
5 4 3 2 1
390 205
Technical sheet
PHOTOMETRY
Opal
DIMENSIONS (mm)
100
A Shape
A
B
C C
D D
E E
F F
8
8
7
7
6
6
5
5 4 3 2 1
390
100
B Shape
A
B
C C
D D
E E
F F
8
8
7
7
6
6
5
5 4 3 2 1
390
OPTIONS
304 INOX
Caisson Emergency
Emergency kit KS1Philips trustsight with 7.2 V 1300mA battery to power a led circuit with 3W for one hour. C2
Cadre
renforcé
Reinforced clamping frame Reinforced clamping frame made of 2mm thick sheet steel.
30°
60°
30°
60°
MPVR
RFT_13
BATDX MiniLed
BATD
X_LE
D
3/3
Technical sheet
TECHNICAL AND ORDERING DATA
ART. NUMBER TYPE Shape Recessed cut (mm) P (W) Emitted fl ow Weight H2O2
OPMI Optic
EUP2077EPF BATDX-MLED OPMI 390/205 1700/2 14/840 EPF A 185x367 14 W 1700 Lm 5,5 Kg •EUP2115EPF BATDX-MLED OPMI 390/390 3900/5 31/840 EPF B 367x367 28 W 3600 Lm 7 Kg •EUP2079EPF BATDX-MLED OPMI 390/390 5300/5 44/840 EPF B 367x367 44 W 5300 Lm 7 Kg •OPPC OpticEUP2078EPF BATDX-MLED OPPC 390/205 1450/2 14/840 EPF A 185x367 14 W 1450 Lm 5,5 Kg •EUP2116EPF BATDX-MLED OPPC 390/390 3400/5 31/840 EPF B 367x367 28 W 3100 Lm 7 Kg •EUP2080EPF BATDX-MLED OPPC 390/390 4500/5 44/840 EPF B 367x367 44 W 4500 Lm 7 Kg •MPPC Optic
EUP2122EPF BATDX-MLED MPPC 390/390 3700/5 31/840 EPF A 367x367 31 W 3700 Lm 7 Kg •EUP2118EPF BATDX-MLED MPPC 390/390 5100/5 44/840 EPF B 367x367 44 W 5100 Lm 7 Kg •MPVR Optic
EUP2123EPF BATDX-MLED MPVR 390/390 3800/5 38/840 EPF A 185x367 38 W 3800 Lm 8 Kg •EUP2124EPF BATDX-MLED MPVR 390/390 5200/5 48/840 EPF B 367x367 48 W 5200 Lm 8 Kg •
Light and power output tolerance ± 10%
ISOONE reserves the right to modify or update this document at any time wit-hin the framework of the technological evolution and the updating of our tech-nical documentation. Despite the care taken in the design and the updating of this card, it can not under any circumstances constitute a contractual document.
Note
CONFORMITYDownload our EU declaration of conformity in our website.
WARRANTY5 years or 20,000 hours of operation warranty according to our general or special terms and conditions of warranty in force at the moment of purchase, and published on our website.
TEMPERATURE AND SWITCHES ONThe operating temperature and the number of daily switches have an infl uence on the service life of the prod-ucts. Our LED luminaires are designed to withstand at least 30,000 starts. Consult us for more information.
STANDARDS AND WARRANTY
ISOONE is a trademark of La Manufacture de France SAS18 rue Jean Monnet - 31240 Toulouse - FranceEmail : [email protected] / Phone : +33 (0)5 62 89 23 23
RFT_14
RECESSED Cleanroom Luminaire
MARS
MAR
S_LE
D
ISO
ON
E-FT
-201
6-V3
-MAR
S_LE
D_E
N.in
dd - 1
8-05
-17-
1305
Technical sheet
TYPE OF PRODUCTWalk-on compact IP65 recessed led luminaire for cleanroom, access from the plenum space.Large range of powers and optical solutions. High power for high spaces. Only adapted for self supported sandwich panel.
MECHANICAL ENGINEERING1mm thickness steel body, white lacquered with polyester, classifi ed Qualicoat class 1 and GSB. Clamping frame in white lacquered steel. 2mm aluminium body, red lacquered top cover, to be easily identifi able in plenum.
LED MODULESZagha mid-power LED fi xed on a 2mm thickness aluminium plate for a better thermal management. 3 SDCM colour space, IRC is lower than 85. Estimated lifetime L80B10 at 50.000h.
OPTICS- TRPC/30 : narrow spot optic (30º) applied directly on the pcb, clear polycarbonate dif-fuser- TRPC/60 : medium spot optic (60º) applied directly on the pcb, clear polycarbonate dif-fuser- OPPC : opal plate in PC. High mechanical resistance.- OPMI : opal plate in PMMA of high light transmission , perspex diffuse 80. High chemical resistance.- MPPC : prismatic plate with diamond-like structure to reduce glare. UGR is lower than 19.
CONTROL OF CONTAMINATIONThe reduced level of retention and emission of particles obtained on this range of prod-ucts allows their use in cleanrooms classifi ed up to ISO 3.A set of technical seals ensures the sealing, avoids the proliferation of bacteria and re-duces the gas exchanges.
WEIGHT RESISTANCELuminaires designed and tested to resist the application of a mass of 100 Kg on the top cover corresponding to an accidental support of a person on the luminaire in the walkable plenum space.
H2O2 RESISTANCEComponents that can come into contact with hydrogen peroxide during the decontami-nation process were tested by cyclic, direct and prolonged contact with a 35% H2O2 solu-tion, see resistance in the table of references.
POWER SUPPLYLuminaires equipped with European branded full-fl ow electronic power supplies (EPF). Rated voltage 240 V. DALI dimming (GDA) available as an option. Access to the equip-ment from the top of the fi xture, without breaking the classifi cation of the room.
TEMPERATURE AND HUMIDITYReference ambient temperature: 20ºC. Operating temperature range: 5 to 25ºC (the tem-perature affects the lifetime of the LEDs).For environments with a moisture content of more than 70%, we recommend the use of lacquered INOX 304 for the body, as an option.
INSTALLATIONInstallation in false ceilings of high thickness from 15 to 100 mm. Adaptation possible for larger thicknesses, please consult us. Quick installation without luminaire opening.
WIRINGThrough a waterproof Wieland brand connector, RST20i on the top of the luminaire (fl ex-ible H07RN-F 3G1,5mm2 cord mounting).
1/3
LED
IP65
CE
3ISO
IK07OPMI
IK08OPPC
650ºOPMI
960ºOPPC
BATDX MiniLed
BATD
X_LE
D
3/3
Technical sheet
TECHNICAL AND ORDERING DATA
ART. NUMBER TYPE Shape Recessed cut (mm) P (W) Emitted fl ow Weight H2O2
OPMI Optic
EUP2077EPF BATDX-MLED OPMI 390/205 1700/2 14/840 EPF A 185x367 14 W 1700 Lm 5,5 Kg •EUP2115EPF BATDX-MLED OPMI 390/390 3900/5 31/840 EPF B 367x367 28 W 3600 Lm 7 Kg •EUP2079EPF BATDX-MLED OPMI 390/390 5300/5 44/840 EPF B 367x367 44 W 5300 Lm 7 Kg •OPPC OpticEUP2078EPF BATDX-MLED OPPC 390/205 1450/2 14/840 EPF A 185x367 14 W 1450 Lm 5,5 Kg •EUP2116EPF BATDX-MLED OPPC 390/390 3400/5 31/840 EPF B 367x367 28 W 3100 Lm 7 Kg •EUP2080EPF BATDX-MLED OPPC 390/390 4500/5 44/840 EPF B 367x367 44 W 4500 Lm 7 Kg •MPPC Optic
EUP2122EPF BATDX-MLED MPPC 390/390 3700/5 31/840 EPF A 367x367 31 W 3700 Lm 7 Kg •EUP2118EPF BATDX-MLED MPPC 390/390 5100/5 44/840 EPF B 367x367 44 W 5100 Lm 7 Kg •MPVR Optic
EUP2123EPF BATDX-MLED MPVR 390/390 3800/5 38/840 EPF A 185x367 38 W 3800 Lm 8 Kg •EUP2124EPF BATDX-MLED MPVR 390/390 5200/5 48/840 EPF B 367x367 48 W 5200 Lm 8 Kg •
Light and power output tolerance ± 10%
ISOONE reserves the right to modify or update this document at any time wit-hin the framework of the technological evolution and the updating of our tech-nical documentation. Despite the care taken in the design and the updating of this card, it can not under any circumstances constitute a contractual document.
Note
CONFORMITYDownload our EU declaration of conformity in our website.
WARRANTY5 years or 20,000 hours of operation warranty according to our general or special terms and conditions of warranty in force at the moment of purchase, and published on our website.
TEMPERATURE AND SWITCHES ONThe operating temperature and the number of daily switches have an infl uence on the service life of the prod-ucts. Our LED luminaires are designed to withstand at least 30,000 starts. Consult us for more information.
STANDARDS AND WARRANTY
ISOONE is a trademark of La Manufacture de France SAS18 rue Jean Monnet - 31240 Toulouse - FranceEmail : [email protected] / Phone : +33 (0)5 62 89 23 23
RFT_15
MARSTechnical sheet
MAR
S_LE
D
2/3
DIMENSIONS (mm)
30°
60°
PHOTOMETRY
30°
60°
30°
60°
30°
60°
30°
60°
30°
60°
Opal Optique 60º Optique 30º
OPTIONS
304 INOX
Caisson
B Shape
390
420
103
390
390
A Shape
390 420
103
390
240
RFT_16
MARSTechnical sheet
MAR
S_LE
D
3/3
TECHNICAL AND ORDERING DATA
ISOONE reserves the right to modify or update this document at any time wit-hin the framework of the technological evolution and the updating of our tech-nical documentation. Despite the care taken in the design and the updating of this card, it can not under any circumstances constitute a contractual document.
Note
ISOONE is a trademark of La Manufacture de France SAS18 rue Jean Monnet - 31240 Toulouse - FranceEmail : [email protected] / Phone : +33 (0)5 62 89 23 23
Light and power output tolerance ± 10%
Art. number Type Shape Cut (mm) P (W) Emitted fl ow LOR UGR Weight H2O2
TRPC/30 Optics : intensive 30º - Polycarbonate
EUP2019EPF MARS TRPC/30 LED 390/390 4500/4 35/840 EPF B 367x367 35 W 4500 Lm 128 Lm/W 6 Kg •EUP2020EPF MARS TRPC/30 LED 390/390 9200/4 76/840 EPF B 367x367 76 W 9200 Lm 120 Lm/W 6 Kg •TRPC/60 Optics: aperture 60º - Polycarbonate
EUP2021EPF MARS TRPC/60 LED 390/390 4500/4 35/840 EPF B 367x367 35 W 4500 Lm 128 Lm/W 6 Kg •EUP2022EPF MARS TRPC/60 LED 390/390 9200/4 76/840 EPF B 367x367 76 W 9200 Lm 120 Lm/W 6 Kg •OPMI Optics : opal PMMA diffuser
EUP2093EPF MARS OPMI LED 240/390 1700/2 14/840 EPF A 14 W 1700 Lm 118 Lm/W 4,5 Kg •EUP2094EPF MARS OPMI LED 390/390 3950/5 31/840 EPF B 367x367 28 W 3600 Lm 127 Lm/W 6 Kg •EUP2095EPF MARS OPMI LED 390/390 5300/5 44/840 EPF B 367x367 44 W 5300 Lm 121 Lm/W 6 Kg •EUP2110EPF MARS OPMI LED 390/390 9900/5 90/840 EPF B 367x367 90 W 9900 Lm 110 Lm/W 6 Kg •OPPC Optics : opal polycarbonate
EUP2010EPF MARS OPPC LED 240/390 1450/2 14/840 EPF A 14 W 1450 Lm 101 Lm/W 4,5 Kg •EUP2023EPF MARS OPPC LED 390/390 3400/5 31/840 EPF B 367x367 28 W 3100 Lm 109 Lm/W 6 Kg •EUP2024EPF MARS OPPC LED 390/390 4500/5 44/840 EPF B 367x367 44 W 4500 Lm 103 Lm/W 6 Kg •MPPC Optics : polycarbonate Micro-prismatic
EUP2082EPF MARS MPPC LED 390/390 3700/5 31/840 EPF B 367x367 28 W 3300 Lm 119 Lm/W <19 6 Kg •EUP2081EPF MARS MPPC LED 390/390 5100/5 44/840 EPF B 367x367 44 W 5100 Lm 117 Lm/W 6 Kg •EUP2089EPF MARS MPPC LED 390/390 9200/5 89/840 EPF B 367x367 89 W 9200 Lm 103 Lm/W 6 Kg •MPVR Optics : tempered glass + micro-prismatic sheet
EUP2120EPF MARS MPVR 390/390 3800/5 36/840 EPF B 367x367 28 W 3800 Lm 105 Lm/W <19 6 Kg •EUP2121EPF MARS MPVR 390/390 5200/5 48/840 EPF B 367x367 44 W 5200 Lm 108 Lm/W 6 Kg •
CONFORMITYDownload our EU declaration of conformity in our website.
WARRANTY5 years or 20,000 hours of operation warranty according to our general or special terms and conditions of war-ranty in force at the moment of purchase, and published on our website.
TEMPERATURE AND SWITCHES ONThe operating temperature and the number of daily switches have an infl uence on the service life of the pro-ducts. Our LED luminaires are designed to withstand at least 30,000 starts. Consult us for more information.
STANDARDS AND WARRANTY
RFT_17
Ra88-HLED
Ra88
-HLE
D
ISO
ON
E_FT
_Ra8
8H_L
ED_E
N.in
dd -
18-0
5-17
-130
5
TYPE OF PRODUCTIP65 recessed led luminaire for cleanroom, access from the plenum space.Low glare louver and high resistance tempered glass. Only adapted for self supported sandwich panel. Large range of outputs.
MECHANICAL ENGINEERING1mm thickness cold rolled steel body, white polyester powder coat painted (RAL9003) , classifi ed Qualicoat class 1 and GSB. Clamping frame in white painted steel. Red lac-quered top cover, to be easily identifi able in plenum.
LED MODULESMid-power LED with opal cover fi xed on a large steel plate to ensure a good thermal management. 3 SDCM colour space, IRC is 85. Estimated lifetime L80B10 at 60.000h.
LOUVEROptical body mounted on the lower frame, consisting of a 3mm thick safety glass and a low luminance louver in glossy metallized aluminium under vacuum. Upscale visual comfort: UGR <19.
CONTROL OF CONTAMINATIONThe reduced level of retention and emission of particles obtained on this range of prod-ucts allows their use in cleanrooms classifi ed up to ISO 3.A set of technical seals ensures the sealing, avoids the proliferation of bacteria and re-duces the gas exchanges.
H2O2 RESISTANCEComponents that can come into contact with hydrogen peroxide during the decontam-ination process were tested by cyclic, direct and prolonged contact with a 35% H2O2 solution, see resistance in the table of references.
TEMPERATURE AND HUMIDITYReference ambient temperature: 20ºC / 68ºF. Operating temperature range: 5 to 25ºC / 41 to 77 ºF (the temperature affects the lifetime of the LEDs).For environments with a moisture content of more than 70%, we recommend the use of lacquered INOX 304 for the body, as an option.
POWER SUPPLYLuminaires equipped with European branded full-fl ow electronic power supplies (EPF). Rated voltage 240 V. DALI dimming (GDA) available as an option. Access to the equip-ment from the top of the fi xture, without breaking the classifi cation of the room.
MOUNTINGInstallation in false ceilings sandwich type, from 15 to 100 mm thickness. Adaptation possible for larger thickness’s, please consult us. Quick installation without luminaire opening.
ELECTRICAL WIRINGThrough a waterproof Wieland brand connector, RST20i on the top of the fi xture (fl exible H07RN-F 3G1,5mm2 cord mounting).
1/3
LED
IP65
CE
IK08
960º
Ambiante
º25ºC
3ISO
8 160.000h
7 280.000h
RECESSED Cleanroom Luminaire Technical sheet
RFT_18
Ra88
-HLE
D
2/3
30°
45°
30°
45°
OPTIONS
Ra88-HLED
304 INOX
Caisson Emergency
Emergency kit KS1Philips trustsight with 7.2 V 1300mA battery to power a 3W LED cir-cuit for 1h.
DIMENSIONS (mm)
1305
1245
300
235
120
C Shape
665
605
515
450
120
B Shape
1545 235
1605
120
300
D Shape
665
605
300
235
120
A Shape
Technical sheet
PHOTOMETRY
Ra88-HLED
Ra88
-HLE
D
ISO
ON
E_FT
_Ra8
8H_L
ED_E
N.in
dd -
18-0
5-17
-130
5
TYPE OF PRODUCTIP65 recessed led luminaire for cleanroom, access from the plenum space.Low glare louver and high resistance tempered glass. Only adapted for self supported sandwich panel. Large range of outputs.
MECHANICAL ENGINEERING1mm thickness cold rolled steel body, white polyester powder coat painted (RAL9003) , classifi ed Qualicoat class 1 and GSB. Clamping frame in white painted steel. Red lac-quered top cover, to be easily identifi able in plenum.
LED MODULESMid-power LED with opal cover fi xed on a large steel plate to ensure a good thermal management. 3 SDCM colour space, IRC is 85. Estimated lifetime L80B10 at 60.000h.
LOUVEROptical body mounted on the lower frame, consisting of a 3mm thick safety glass and a low luminance louver in glossy metallized aluminium under vacuum. Upscale visual comfort: UGR <19.
CONTROL OF CONTAMINATIONThe reduced level of retention and emission of particles obtained on this range of prod-ucts allows their use in cleanrooms classifi ed up to ISO 3.A set of technical seals ensures the sealing, avoids the proliferation of bacteria and re-duces the gas exchanges.
H2O2 RESISTANCEComponents that can come into contact with hydrogen peroxide during the decontam-ination process were tested by cyclic, direct and prolonged contact with a 35% H2O2 solution, see resistance in the table of references.
TEMPERATURE AND HUMIDITYReference ambient temperature: 20ºC / 68ºF. Operating temperature range: 5 to 25ºC / 41 to 77 ºF (the temperature affects the lifetime of the LEDs).For environments with a moisture content of more than 70%, we recommend the use of lacquered INOX 304 for the body, as an option.
POWER SUPPLYLuminaires equipped with European branded full-fl ow electronic power supplies (EPF). Rated voltage 240 V. DALI dimming (GDA) available as an option. Access to the equip-ment from the top of the fi xture, without breaking the classifi cation of the room.
MOUNTINGInstallation in false ceilings sandwich type, from 15 to 100 mm thickness. Adaptation possible for larger thickness’s, please consult us. Quick installation without luminaire opening.
ELECTRICAL WIRINGThrough a waterproof Wieland brand connector, RST20i on the top of the fi xture (fl exible H07RN-F 3G1,5mm2 cord mounting).
1/3
LED
IP65
CE
IK08
960º
Ambiante
º25ºC
3ISO
8 160.000h
7 280.000h
RECESSED Cleanroom Luminaire Technical sheet
RFT_19
Ir77-HLED
IR77
-HLE
D
ISO
ON
E-FT
-201
6-V2
-Ir77
-HLE
D_E
N.in
dd - 1
8-05
-17-
1305
TYPE OF PRODUCTIP65 recessed led luminaire for cleanroom, access from the plenum space.Opal PMMA or PC high light transmission plate. Only adapted for self supported sandwich panel. Large range of outputs.
MECHANICAL ENGINEERING1mm thickness cold rolled steel housing, white polyester powder coat painted (RAL9003) , classifi ed Qualicoat class 1 and GSB. Clamping frame in white painted steel. Red lac-quered top cover, to be easily identifi able in the plenum space.
LED MODULESMid-power LED with opal cover fi xed on a large steel plate to ensure a good thermal management. 3 SDCM colour space, IRC is 85. Estimated lifetime L80B10 at 60.000h.
OPTICSOpal plate glued on the lower frame of the fi xture :- OPPC : opal plate in PC. High mechanical resistance.- OPMI : opal plate in PMMA of high light transmission. High chemical resistance.
CONTROL OF CONTAMINATIONThe reduced level of retention and emission of particles obtained on this range of products allows their use in cleanrooms classifi ed up to ISO 3.A set of technical seals ensures the sealing, avoids the proliferation of bacteria and reduces the gas exchanges.
H2O2 RESISTANCEComponents that can come into contact with hydrogen peroxide during the decontam-ination process were tested by cyclic, direct and prolonged contact with a 35% H2O2 solution, see resistance in the table of references.
TEMPERATURE AND HUMIDITYReference ambient temperature: 20ºC / 68ºF. Operating temperature range: 5 to 25ºC / 41 to 77 ºF (the temperature affects the lifetime of the LEDs).For environments with a moisture content of more than 70%, we recommend the use of lacquered INOX 304 for the body, as an option.
POWER SUPPLYLuminaires equipped with European branded full-fl ow electronic power supplies (EPF). Rated voltage 240 V. DALI dimming (GDA) available as an option. Access to the equip-ment from the top of the fi xture, without breaking the classifi cation of the room.
MOUNTINGInstallation in false ceilings sandwich type, from 15 to 100 mm thickness. Adaptation pos-sible for larger thickness’s, please consult us. Quick installation without luminaire open-ing.Assembly of the lower body from below, clamping of the support frame from above thanks to 4 knurled nuts, without the need to open the luminaire.Luminaires designed for application in self supported sandwich panel with a thickness of 15 to 100 mm. The sealing between the false ceiling and the lower frame must be made at the time of installation
ELECTRICAL WIRINGThrough a waterproof Wieland brand connector, RST20i on the top of the fi xture (fl exible H07RN-F 3G1,5mm2 cord mounting).
1/2
LED
IP65
CE
IK07OPMI
960ºOPPC
3ISO
IK08OPPC
650ºOPMI
8 160.000h
7 280.000h
RECESSED Cleanroom Luminaire Technical sheet
Ra88
-HLE
D
3/3
Ra88-HLED
Art. Number Type Shape CUT (mm) P (W) Emitted fl ow UGR weight
A Shape
EUP2038EPF Ra88-HLED DPVR 665/300 3200/2 32/840 EPF A 640x275 32 W 3200 Lm <19 9 Kg
EUP20401EPF Ra88-HLED DPVR 665/300 4000/2 45/840 EPF A 640x275 45 W 4000 Lm <19 9 Kg
B Shape
EUP2034EPF Ra88-HLED DPVR 665/515 3500/3 33/840 EPF B 640x490 33 W 3500 Lm <19 13 Kg
EUP2035EPF Ra88-HLED DPVR 665/515 5000/3 48/840 EPF B 640x490 48 W 5000 Lm <19 13 Kg
C Shape
EUP2036EPF Ra88-HLED DPVR 1305/300 4200/2 44/840 EPF C 1275x275 44 W 4200 Lm <19 13 Kg
EUP2037EPF Ra88-HLED DPVR 1305/300 6000/2 64/840 EPF C 1275x275 64 W 6000 Lm <19 13 Kg
D Shape
EUP2039EPF Ra88-HLED DPVR 1605/300 5500/2 56/840 EPF D 1575x275 56 W 5500 Lm <19 17 Kg
EUP2040EPF Ra88-HLED DPVR 1605/300 8000/2 81/840 EPF D 1575x275 81 W 8000 Lm <19 17 Kg
TECHNICAL AND ORDERING DATA
Technical sheet
Light and power output tolerance ± 10%
CONFORMITYDownload our EU declaration of conformity in our website.
WARRANTY5 years or 20,000 hours of operation warranty according to our general or special terms and conditions of warranty in force at the moment of purchase, and published on our website.
TEMPERATURE AND SWITCHES ONThe operating temperature and the number of daily switches have an infl uence on the service life of the products. Our LED luminaires are designed to withstand at least 30,000 starts. Consult us for more information.
STANDARDS AND WARRANTY
ISOONE reserves the right to modify or update this document at any time wit-hin the framework of the technological evolution and the updating of our tech-nical documentation. Despite the care taken in the design and the updating of this card, it can not under any circumstances constitute a contractual document.
Note
ISOONE is a trademark of La Manufacture de France SAS18 rue Jean Monnet - 31240 Toulouse - FranceEmail : [email protected] / Phone : +33 (0)5 62 89 23 23
RFT_20
Ir77-HLED
IR77
-HLE
D
ISO
ON
E-FT
-201
6-V2
-Ir77
-HLE
D_E
N.in
dd - 1
8-05
-17-
1305
TYPE OF PRODUCTIP65 recessed led luminaire for cleanroom, access from the plenum space.Opal PMMA or PC high light transmission plate. Only adapted for self supported sandwich panel. Large range of outputs.
MECHANICAL ENGINEERING1mm thickness cold rolled steel housing, white polyester powder coat painted (RAL9003) , classifi ed Qualicoat class 1 and GSB. Clamping frame in white painted steel. Red lac-quered top cover, to be easily identifi able in the plenum space.
LED MODULESMid-power LED with opal cover fi xed on a large steel plate to ensure a good thermal management. 3 SDCM colour space, IRC is 85. Estimated lifetime L80B10 at 60.000h.
OPTICSOpal plate glued on the lower frame of the fi xture :- OPPC : opal plate in PC. High mechanical resistance.- OPMI : opal plate in PMMA of high light transmission. High chemical resistance.
CONTROL OF CONTAMINATIONThe reduced level of retention and emission of particles obtained on this range of products allows their use in cleanrooms classifi ed up to ISO 3.A set of technical seals ensures the sealing, avoids the proliferation of bacteria and reduces the gas exchanges.
H2O2 RESISTANCEComponents that can come into contact with hydrogen peroxide during the decontam-ination process were tested by cyclic, direct and prolonged contact with a 35% H2O2 solution, see resistance in the table of references.
TEMPERATURE AND HUMIDITYReference ambient temperature: 20ºC / 68ºF. Operating temperature range: 5 to 25ºC / 41 to 77 ºF (the temperature affects the lifetime of the LEDs).For environments with a moisture content of more than 70%, we recommend the use of lacquered INOX 304 for the body, as an option.
POWER SUPPLYLuminaires equipped with European branded full-fl ow electronic power supplies (EPF). Rated voltage 240 V. DALI dimming (GDA) available as an option. Access to the equip-ment from the top of the fi xture, without breaking the classifi cation of the room.
MOUNTINGInstallation in false ceilings sandwich type, from 15 to 100 mm thickness. Adaptation pos-sible for larger thickness’s, please consult us. Quick installation without luminaire open-ing.Assembly of the lower body from below, clamping of the support frame from above thanks to 4 knurled nuts, without the need to open the luminaire.Luminaires designed for application in self supported sandwich panel with a thickness of 15 to 100 mm. The sealing between the false ceiling and the lower frame must be made at the time of installation
ELECTRICAL WIRINGThrough a waterproof Wieland brand connector, RST20i on the top of the fi xture (fl exible H07RN-F 3G1,5mm2 cord mounting).
1/2
LED
IP65
CE
IK07OPMI
960ºOPPC
3ISO
IK08OPPC
650ºOPMI
8 160.000h
7 280.000h
RECESSED Cleanroom Luminaire Technical sheet
Ra88
-HLE
D
3/3
Ra88-HLED
Art. Number Type Shape CUT (mm) P (W) Emitted fl ow UGR weight
A Shape
EUP2038EPF Ra88-HLED DPVR 665/300 3200/2 32/840 EPF A 640x275 32 W 3200 Lm <19 9 Kg
EUP20401EPF Ra88-HLED DPVR 665/300 4000/2 45/840 EPF A 640x275 45 W 4000 Lm <19 9 Kg
B Shape
EUP2034EPF Ra88-HLED DPVR 665/515 3500/3 33/840 EPF B 640x490 33 W 3500 Lm <19 13 Kg
EUP2035EPF Ra88-HLED DPVR 665/515 5000/3 48/840 EPF B 640x490 48 W 5000 Lm <19 13 Kg
C Shape
EUP2036EPF Ra88-HLED DPVR 1305/300 4200/2 44/840 EPF C 1275x275 44 W 4200 Lm <19 13 Kg
EUP2037EPF Ra88-HLED DPVR 1305/300 6000/2 64/840 EPF C 1275x275 64 W 6000 Lm <19 13 Kg
D Shape
EUP2039EPF Ra88-HLED DPVR 1605/300 5500/2 56/840 EPF D 1575x275 56 W 5500 Lm <19 17 Kg
EUP2040EPF Ra88-HLED DPVR 1605/300 8000/2 81/840 EPF D 1575x275 81 W 8000 Lm <19 17 Kg
TECHNICAL AND ORDERING DATA
Technical sheet
Light and power output tolerance ± 10%
CONFORMITYDownload our EU declaration of conformity in our website.
WARRANTY5 years or 20,000 hours of operation warranty according to our general or special terms and conditions of warranty in force at the moment of purchase, and published on our website.
TEMPERATURE AND SWITCHES ONThe operating temperature and the number of daily switches have an infl uence on the service life of the products. Our LED luminaires are designed to withstand at least 30,000 starts. Consult us for more information.
STANDARDS AND WARRANTY
ISOONE reserves the right to modify or update this document at any time wit-hin the framework of the technological evolution and the updating of our tech-nical documentation. Despite the care taken in the design and the updating of this card, it can not under any circumstances constitute a contractual document.
Note
ISOONE is a trademark of La Manufacture de France SAS18 rue Jean Monnet - 31240 Toulouse - FranceEmail : [email protected] / Phone : +33 (0)5 62 89 23 23
RFT_21
Ir77-HLED
2/3 IR77
-HTL
ED
OPTIONS
304 INOX
CaissonEmergency
DIMENSIONS (mm)
1305
1245
300
235
120
C Shape
665
605
515
450
120
B Shape
1545 235
1605
120
300
D Shape
665
605
300
235
120
A Shape
Technical sheet
PHOTOMETRY
Emergency kit KS1Philips trustsight with 7.2 V 1300mA battery to power a 3W LED cir-cuit for 1h.
RFT_22
Ir77-HLED
3/3
Art. Number Type Shape Cut (mm) P (W) Emitted fl ow weight (Kg)
OPMI - Opal plate PMMA
EUP2072EPF Ir77-HLED OPMI 665/300 2800/2 32/840 EPF A 275x640 32 W 2800 Lm 8 Kg
EUP2070EPF Ir77-HLED OPMI 665/515 4000/3 48/840 EPF B 490x640 48 W 4000 Lm 11 Kg
EUP2090EPF Ir77-HLED OPMI 665/515 5500/4 64/840 EPF B 490x640 64 W 5500 Lm 11 Kg
EUP2071EPF Ir77-HLED OPMI 1305/300 4000/2 45/840 EPF C 1275x275 45 W 4000 Lm 11 Kg
EUP2113EPF Ir77-HLED OPMI 1305/300 5500/2 64/840 EPF C 1275x275 64 W 5500 Lm 11 Kg
EUP2088EPF Ir77-HLED OPMI 1605/300 7000/2 80/840 EPF D 1575x275 80 W 7000 Lm 15 Kg
OPPC - Opal plate polycarbonate
EUP2075EPF Ir77-HLED OPPC 665/300 2000/2 32/840 EPF A 275x640 32 W 2000 Lm 8 Kg
EUP2073EPF Ir77-HLED OPPC 665/515 3200/3 48/840 EPF B 490x640 48 W 3200 Lm 11 Kg
EUP2091EPF Ir77-HLED OPPC 665/515 4200/4 64/840 EPF B 490x640 64 W 4200 Lm 11 Kg
EUP2074EPF Ir77-HLED OPPC 1305/300 3200/2 45/840 EPF C 1275x275 45 W 3200 Lm 11 Kg
EUP2114EPF Ir77-HLED OPPC 1305/300 4200/2 64/840 EPF C 1275x275 64 W 4200 Lm 11 Kg
EUP2112EPF Ir77-HLED OPPC 1605/300 5500/2 80/840 EPF D 1575x275 80 W 5500 Lm 15 Kg
TECHNICAL AND ORDERING DATA
IR77
-HTL
ED
Technical sheet
Light and power output tolerance ± 10%
CONFORMITYDownload our EU declaration of conformity in our website.
WARRANTY5 years or 20,000 hours of operation warranty according to our general or special terms and conditions of warranty in force at the moment of purchase, and published on our website.
TEMPERATURE AND SWITCHES ONThe operating temperature and the number of daily switches have an infl uence on the service life of the products. Our LED luminaires are designed to withstand at least 30,000 starts. Consult us for more information.
STANDARDS AND WARRANTY
ISOONE reserves the right to modify or update this document at any time with-in the framework of the technological evolution and the updating of our tech-nical documentation. Despite the care taken in the design and the updating of this card, it can not under any circumstances constitute a contractual document.
Note
ISOONE is a trademark of La Manufacture de France SAS18 rue Jean Monnet - 31240 Toulouse - FranceEmail : [email protected] / Phone : +33 (0)5 62 89 23 23
Ir77-HLED
2/3 IR77
-HTL
ED
OPTIONS
304 INOX
CaissonEmergency
DIMENSIONS (mm)
1305
1245
300
235
120
C Shape
665
605
515
450
120
B Shape
1545 235
1605
120
300
D Shape
665
605
300
235
120
A Shape
Technical sheet
PHOTOMETRY
Emergency kit KS1Philips trustsight with 7.2 V 1300mA battery to power a 3W LED cir-cuit for 1h.
RFT_23
DRACO
DRA
CO
_LED
ISO
ON
E-FT
-201
6-V3
-DRA
CO_L
ED_E
N.in
dd - 1
8-05
-17-
1305
Technical sheet
TYPE OF PRODUCTCompact IP65 recessed led luminaire for cleanroom, access from above.Large range of powers and optical solutions. High power for high spaces. Only adapted for self supported sandwich panel.
MECHANICAL CONSTRUCTION0,8mm thickness steel body, white lacquered with white polyester, classifi ed Qualicoat class 1 and GSB. Lower frame in extruded aluminium lacquered white, screwed on the body of the luminaire by 4 stainless steel screws. Internal 2mm plate designed to improve heat dissipa-tion.
LED MODULESVery high effi ciency LED circuits (> 180 Lm / W) of European brand, screwed on a 2mm thick aluminium plate ensuring optimal dissipation for the product life. Characteristic of leds L80B10 for a lifespan of 50.000h. Low colour dissipation: 3 SDCM. Colour rendering index higher than 85. OPTICS- TRPC/30 : narrow spot optic (30º) applied directly on the pcb, clear polycarbonate diffuser- TRPC/60 : medium spot optic (60º) applied directly on the pcb, clear polycarbonate diffuser- OPPC : opal plate in PC. High mechanical resistance.- OPMI : opal plate in PMMA of high light transmission , perspex diffuse 80. High chemical resistance.- MPPC : prismatic plate with diamond-like structure to reduce glare. UGR is lower than 19.
CONTROL OF CONTAMINATIONThe reduced level of retention and emission of particles obtained on this range of products allows their use in cleanrooms classifi ed up to ISO 3.A set of technical seals ensures the sealing, avoids the proliferation of bacteria and reduces the gas exchanges.
H2O2 RESISTANCEComponents that can come into contact with hydrogen peroxide during the decontamina-tion process were tested by cyclic, direct and prolonged contact with a 35% H2O2 solution, see resistance in the table of references.
POWER SUPPLYLuminaires equipped with European branded no dimmable electronic power supply (EPF). Rated voltage 240 V. DALI dimming (GDA) available as an option. Access to the equipment from below.
TEMPERATURE AND HUMIDITYReference ambient temperature: 20ºC. Operating temperature range: 5 to 25ºC (the temper-ature affects the lifetime of the LEDs).For environments with a moisture content of more than 70%, we recommend the use of lac-quered INOX 304 for the body, as an option.
INSTALLATIONInstallation in false ceilings, thickness from 13 to 80 mm :- By clamping by means of the stretcher provided as standard, allowing thanks to the IsoFlex system a fi xation by the inside of the luminaire while maintaining the tightness- By suspension by means of threaded rods (not supplied) attached to the shell.- By optional mounting brackets.
WIRINGThrough a waterproof Wieland branded connector, RST20i on the top of the luminaire (fl exi-ble H07RN-F 3G1,5mm2 cord mounting).
1/3
LED
IP65
CE
4 ISO
IK07OPMI
IK08OPPC
650ºOPMI
960ºOPPC
7 280.000h
RECESSED Cleanroom Luminaire
RFT_24
DRACOTechnical sheet
DIMENSIONS (mm)
30°
60°
PHOTOMETRY
30°
60°
30°
60°
30°
60°
30°
60°
30°
60°
Opal 60º Optics 30ª Optics
210
150
100
390
330
A Shape
390
330
390
330
90B Shape
DETAILS
STANDARD CLAMPING OPIONAL CLAMPINGA1002ACC - ETRIER DRACO 2139
Pour modèle 210x390 mm
DRA
CO
_LED
2/3
OPTIONS
Frame without screws (SV)The 4 INOX screws are replaced by in-ternal springs.
Body INOX 304 laqueredFor applications where the risk of oxida-tion is high.
RFT_25
DRACOTechnical sheet
DRA
CO
_LED
3/3
Art. Number Type Shape Cut (mm) P (W) Emitted fl ow UGR < 19 Clamping 4 points (mm) Weight
TRPC/30 Optics : intensive 30º - Polycarbonate
EDO2021EPF DRACO TRPC/30 LED 390/390 4500/4 35/840 EPF B 350x350 35 W 4500 Lm • 187x187 4,5 KgEDO2022EPF DRACO TRPC/30 LED 390/390 9200/4 76/840 EPF B 350x350 76 W 9200 Lm • 187x187 4,5 Kg
TRPC/60 Optics: aperture 60º - Polycarbonate
EDO2023EPF DRACO TRPC/60 LED 390/390 4500/4 35/840 EPF B 350x350 35 W 4500 Lm • 187x187 4,5 KgEDO2024EPF DRACO TRPC/60 LED 390/390 9200/4 76/840 EPF B 350x350 76 W 9200 Lm • 187x187 4,5 Kg
OPMI Optics : PMMA difuse
EDO2013EPF DRACO OPPC LED 210/390 1450/2 14/840 EPF A 170x350 14 W 1450 Lm 101x187 2,5 KgEDO2014EPF DRACO OPPC LED 210/390 2900/2 33/840 EPF A 170x350 33 W 2900 Lm 101x187 2,5 Kg
EDO2025EPF DRACO OPPC LED 390/390 3100/5 28/840 EPF B 350x350 28 W 3100 Lm 187x187 4,5 Kg
EDO2026EPF DRACO OPPC LED 390/390 4500/5 44/840 EPF B 350x350 44 W 4500 Lm 187x187 4,5 Kg
OPPC Optics : polycarbonate opal
EDO2092EPF DRACO OPMI LED 210/390 1700/2 14/840 EPF A 170x350 14 W 1700 Lm 101x187 2,5 KgEDO2093EPF DRACO OPMI LED 210/390 3300/2 33/840 EPF A 170x350 33 W 3300 Lm 101x187 2,5 Kg
EDO2094EPF DRACO OPMI LED 390/390 3600/5 28/840 EPF B 350x350 28 W 3600 Lm 187x187 4,5 Kg
EDO2095EPF DRACO OPMI LED 390/390 5300/4 44/840 EPF B 350x350 44 W 5300 Lm 187x187 4,5 Kg
EDO2108EPF DRACO OPMI LED 390/390 9300/5 89/840 EPF B 350x350 89 W 9300 Lm 187x187 4,5 Kg
MPPC Optics : polycarbonate Micro-prismatic
EDO2086EPF DRACO MPPC LED 390/390 3300/5 28/840 EPF B 350x350 28 W 3300 Lm • 187x187 4,5 KgEDO2087EPF DRACO MPPC LED 390/390 5100/5 44/840 EPF B 350x350 44 W 5100 Lm 187x187 4,5 Kg
EDO2100EPF DRACO MPPC LED 390/390 9200/5 89/840 EPF B 350x350 89 W 9200 Lm 187x187 4,5 Kg
TECHNICAL AND ORDERING DATA
Light and power output tolerance ± 10%
ISOONE reserves the right to modify or update this document at any time with-in the framework of the technological evolution and the updating of our tech-nical documentation. Despite the care taken in the design and the updating of this card, it can not under any circumstances constitute a contractual document.
Note
ISOONE is a trademark of La Manufacture de France SAS18 rue Jean Monnet - 31240 Toulouse - FranceEmail : [email protected] / Phone : +33 (0)5 62 89 23 23
CONFORMITYDownload our EU declaration of conformity in our website.
WARRANTY5 years or 20,000 hours of operation warranty according to our general or special terms and conditions of warranty in force at the moment of purchase, and published on our website.
TEMPERATURE AND SWITCHES ONThe operating temperature and the number of daily switches have an infl uence on the service life of the prod-ucts. Our LED luminaires are designed to withstand at least 30,000 starts. Consult us for more information.
STANDARDS AND WARRANTY
Light and power output tolerance ± 10%
RFT_26
RFT_27
Ra88_LED
Ra88
_LED
ISO
ON
E-FT
-201
6-V2
-Ra8
8_LE
D_F
R.in
dd - 1
8-05
-17-
1305
Fiche technique
1/3
LED
IP65
CE
IK08
960º
Ambiante
º25ºC
4 ISO
8 160.000h
7 280.000h
TYPE OF PRODUCTLuminaires encastrés à LED, IP65, accès par le dessous. Optique basse lumi-nance et verre de protection.Large gamme de puissances et dimensions. Installation en faux-plafonds modu-laires ou à découpe.
CONSTRUCTION MÉCANIQUECorps fabriqué en tôle d’acier 0,8mm d’épaisseur, laqué blanc par poudrage polyester. Le retour plat du caisson permet une application optimale du joint lors de l’installation.Cadre inférieur en aluminium laqué blanc, vissé sur le caisson par l’intermédiaire de 8 vis inox.
MODULES LEDModules linéaire haut rendement avec diffuseur de haute transmission lumi-neuse. Faible dispersion chromatique : 3 SDCM. Durée de vie 50.000h à 20ºC : L80 B10. OPTIQUEEnsemble optique monté sur le cadre aluminium, composé d’un verre de sécu-rité de 3mm d’épaisseur et d’une grille basse luminance en aluminium brillant métallisé sous vide. Confort visuel haut de gamme : UGR<19.
CONTRÔLE DE LA CONTAMINATIONLe faible niveau de rétention et d’émission de particules obtenu sur cette gamme de produits permet leur utilisation dans des salles classifi ées jusqu’à ISO 4.Un ensemble de joints techniques assure l’étanchéité, évite la prolifération de bactéries et réduit les échanges gazeux.
RÉSISTANCE H2O2Les composants pouvant rentrer en contact avec le peroxyde d’hydrogène lors du processus de décontamination ont été testés par contact cyclique, direct et prolon-gé à une solution H2O2 35%.
ÉQUIPEMENT ÉLECTRIQUELuminaires équipés d’alimentation électronique plein fl ux (EPF), tension nomi-nale 220/240V 50/60Hz, de marque européenne. Alimentation gradable DALI en option (GDA). Accès à l’équipement par le dessous du luminaire.
TEMPERATURE ET HUMIDITÉTempérature ambiante de référence : 20ºC . Plage de températures de fonction-nement : 5 à 25ºC(la température a une infl uence sur la durée de vie des LED). Pour des ambiances dont le taux d’humidité est supérieur à 70% nous conseil-lons l’utilisation de caissons INOX 304 laqué ou brossé, en option.
INSTALLATIONEncastrement du caisson en faux-plafond modulaire (hors clip-in) ou à découpe de 13 à 80 mm d’épaisseur :- Par serrage au moyen des brancards fournis de série permettant, grâce au sys-tème Isofl ex une fi xation par l’intérieur du luminaire en conservant l’étanchéité.- Par suspension au moyen de tiges fi letées (non fournies) fi xées au gros oeuvre.- Par les pattes de serrages optionnelle.
CONNEXION ÉLECTRIQUEPar un connecteur étanche de marque Wieland sur le dessus du luminaire (mon-tage sur cordon fl exible)
Luminaires ENCASTRÉS IP65
RFT_28
Ra88_LEDFiche technique
Ra88
_LED
2/3
PHOTOMETRIE
30°
45°
30°
45°
OPTIONS
304 INOX
Caisson
DIMENSIONS (mm)
1197
1176
297
260
90
Type C
597
576
597
560
90
Type B
1476 260
1497
90
297
Type D
597
576Type A
297
260
90
Emergency
Kit secours KS1Trustsight de Philips avec baterie 7,2 V 1300mA pour l’alimentation d’un circuit LED 3W durant 1h.
RFT_29
Ra88_LEDFiche technique
Ra88
_LED
3/3
Code Description Type Découpe (mm) P (W) Flux émis UGR Poids
A shape
EDO2039EPF Ra88 DPVR LED 597/297 3200/2 21/840 EPF A 580x280 21 3200 Lm <19 6 Kg
EDO2091EPF Ra88 DPVR LED 597/297 4000/2 48/840 EPF A 580x280 48 4000 Lm <19 6 Kg
B shape
EDO2036EPF Ra88 DPVR LED 597/597 3500/3 33/840 EPF B 580x580 33 3500 Lm <19 8,5 Kg
EDO2089EPF Ra88 DPVR LED 597/597 5000/3 48/840 EPF B 580X580 48 5000 Lm <19 8,5 Kg
C shape
EDO2155EPF Ra88 DPVR LED 1197/297 4200/2 44/840 EPF C 1180x280 44 4200 Lm <19 8,5 Kg
EDO2037EPF Ra88 DPVR LED 1197/297 6000/2 64/840 EPF C 1180x280 64 6000 Lm <19 8,5 Kg
D shape
EDO2156EPF Ra88 DPVR LED 1497/297 5500/2 56/840 EPF D 1480x280 56 5500 Lm <19 10 KgEDO2038EPF Ra88 DPVR LED 1497/297 8000/2 80/840 EPF D 1480x280 80 8000 Lm <19 10 Kg
REFERENCES ET DIMENSIONS
Tolérance de production du fl ux lumineux et de consommation ±10%
110
mm
Epai
sseu
r de
serr
age
de 1
0 à
100
mm
Vis non fournies
clamping tabs
ACCESSORIES
CODE RÉFÉRENCE
Pattes de serrage pour faux-plafond, épaisseur de serrage 13 à 100 mm.
A1000ACC PTTS DUO
A1001ACC PTTS TRIO/QUARTO
Filins pour suspension de sécuritéA1021ACC Kit fi lin Duo Ir77-Ra88 (pour format type A, C et D)
A1022ACC Kit fi lin quarto Ir77-Ra88 (pour format type B)
CONFORMITÉConsulter la déclaration EU de conformité sur notre site internet.
GARANTIEGamme garantie 5 ans, 20.000 heures de fonctionnement selon nos conditions générales de vente et condi-tions particulières de garantie, faisant référence au moment de l’achat et publiées sur notre site internet.
TEMPÉRATURE ET ALLUMAGESLa température de fonctionnement et le nombre d’allumages quotidien ont une infl uence sur la durée de vie des produits. Nos luminaires sont conçu afi n de supporter au moins 30.000 allumages. Consultez-nous pour de plus amples renseignements.
NORMES ET GARANTIES
Dans le cadre de l’évolution technologique et de la mise à jour de nos documenta-tions techniques, ISOONE se réserve le droit de modifi er ou actualiser ce docu-ment à tout moment. Malgré le soin apporté à la conception et à la mise à jour de cette fi che elle ne pourra en aucun cas constituer un document contractuel.
Remarque
ISOONE est une marque de La Manufacture de France SASRFT_30
RECESSED Cleanroom Luminaire
Ir77-LED
ISO
ON
E-FT
-201
7-V2
-Ir77
_LED
_EN
.indd
- 18-
05-1
7-13
05
Technical sheet
TYPE OF PRODUCTIP65 recessed led luminaire for cleanroom, access from below.Opal PMMA or PC high light transmission plate. Adapted for modular T-bar false ceiling or continuous false ceiling to be cut. Large range of outputs.
MECHANICAL ENGINEERINGBody made of 0.8 mm thick sheet steel, white lacquered with polyester powder coating (RAL9003) , classifi ed Qualicoat class 1 and GSB. The fl at return of the body allows opti-mal application of the seal during installation. Lower frame in white lacquered aluminum, screwed to the body by means of 8 stainless steel screws.
LED MODULESMid-power LED with opal cover fi xed on a large steel plate to ensure a good thermal man-agement. 3 SDCM colour space, IRC is 85. Estimated lifetime L80B10 at 60.000h.
OPTICSOpal plate glued on the lower frame of the fi xture :- OPPC : opal plate in PC. High mechanical resistance.- OPMI : opal plate in PMMA of high light transmission. High chemical resistance.- OPVR : tempered glass with inner sanded face
CONTROL OF CONTAMINATIONThe reduced level of retention and emission of particles obtained on this range of products allows their use in cleanrooms classifi ed up to ISO 3.A set of technical seals ensures the sealing, avoids the proliferation of bacteria and reduces the gas exchanges.
H2O2 RESISTANCEComponents that can come into contact with hydrogen peroxide during the decontam-ination process were tested by cyclic, direct and prolonged contact with a 35% H2O2 solution, see resistance in the table of references.
TEMPERATURE AND HUMIDITYReference ambient temperature: 20ºC / 68ºF. Operating temperature range: 5 to 25ºC / 41 to 77 ºF (the temperature affects the lifetime of the LEDs).For environments with a moisture content of more than 70%, we recommend the use of lacquered INOX 304 for the body, as an option.
ELECTRICAL EQUIPMENTLuminaires equipped with European branded full-fl ow electronic power supplies (EPF). Rated voltage 240 V. DALI dimming (GDA) available as an option.
INSTALLATIONBody recessed in modular suspended ceilings (off clip-in) or continuous ceiling from 13 to 80 mm thick: - by means of the shafts supplied as standard, allowing, thanks to the Isofl ex system, a fi xation from the inside of the luminaire while maintaining the tightness. - by means of threaded rods (not supplied) attached to the shell. - by the optional clamping tabs.
ELECTRICAL WIRINGThrough a waterproof Wieland brand connector, RST20i on the top of the fi xture (lexible H07RN-F 3G1,5mm2 cord mounting).
1/3
LED
IP65
CE
IK07OPMI
960ºOPPC
4 ISO
IK10OPPC
650ºOPMI
8 160.000h
7 280.000h
Ir77_
LED
RFT_31
Ir77-LEDTechnical sheet
Ir77_
LED
2/3
PHOTOMETRY
30°
45°
30°
45°
OPTIONS
304 INOX
Caisson
DIMENSIONS (mm)
1197
1176
297
260
90
C Shape
597
576
597
560
90
B Shape
1476 260
1497
90
297
D Shape
597
576A Shape
297
260
90
ACCESSORIES
110
mm
Epai
sseu
r de
serr
age
de 1
0 à
100
mm
Vis non fournies
Art. Number Type
Clamps for false ceilings, clamping thickness 13 to 100 mm.
A1000ACC PTTS DUO
A1001ACC PTTS TRIO/QUARTO
Security steel cableA1021ACC Kit fi lin Duo Ir77-Ra88 (pour format type A, C et D)
A1022ACC Kit fi lin quarto Ir77-Ra88 (pour format type B)
clamping tabs
Emergency
Emergency kit KS1Philips trustsight with 7.2 V 1300mA battery to power a 3W LED cir-cuit for 1h.
RFT_32
Ir77-LEDTechnical sheet
Ir77_
LED
3/3
TECHNICAL AND ORDERING DATA
Art. Number Type Shape Cut (mm) P (W) Emitted fl ow weight (Kg)
OPMI - Opal plate PMMA
EDO2074EPF Ir77-LED OPPC 597/597 3200/3 48/840 EPF B 580x580 48 3200 Lm 8 KgEDO2078EPF Ir77-LED OPPC 597/597 4200/4 64/840 EPF B 580x580 64 4200 Lm 8 Kg
EDO2075EPF Ir77-LED OPPC 1197/297 3200/4 45/840 EPF C 1180x280 45 3200 Lm 8 Kg
EDO2077EPF Ir77-LED OPPC 1197/297 4200/4 64/840 EPF C 1180x280 64 4200 Lm 8 Kg
EDO2076EPF Ir77-LED OPPC 597/297 2000/2 32/840 EPF A 580x280 32 2000 Lm 6 Kg
EDO2158EPF Ir77-LED OPPC 1497/297 5500/4 80/840 EPF D 1480x280 80 5500 Lm 9,5 Kg
OPPC - Opal plate polycarbonate
EDO2070EPF Ir77-LED OPMI 597/597 4000/3 48/840 EPF B 580x580 48 4000 Lm 8 KgEDO2084EPF Ir77-LED OPMI 597/597 5500/4 64/840 EPF B 580x580 64 5500 Lm 8 Kg
EDO2071EPF Ir77-LED OPMI 1197/297 4000/4 45/840 EPF C 1180x280 45 4000 Lm 8 Kg
EDO2073EPF Ir77-LED OPMI 1197/297 5500/4 64/840 EPF C 1180x280 64 5500 Lm 8 Kg
EDO2159EPF Ir77-LED OPMI 1197/297 7000/2 81/840 EPF C 1180x280 81 7000 Lm 8 Kg
EDO2072EPF Ir77-LED OPMI 597/297 2750/2 32/840 EPF A 580x280 32 2750 Lm 6 Kg
EDO2157EPF Ir77-LED OPMI 1497/297 7000/4 80/840 EPF D 1480x280 80 7000 Lm 9,5 Kg
OPVR - Tempered glass, sanded inner face
EDO2107EPF Ir77-LED OPVR LED 597/597 5400/6 62/840 EPF B 580x580 62 5400 Lm
Light and power output tolerance ± 10%
CONFORMITYDownload our EU declaration of conformity in our website.
WARRANTY5 years or 20,000 hours of operation warranty according to our general or special terms and conditions of warranty in force at the moment of purchase, and published on our website.
TEMPERATURE AND SWITCHES ONThe operating temperature and the number of daily switches have an infl uence on the service life of the products. Our LED luminaires are designed to withstand at least 30,000 starts. Consult us for more information.
STANDARDS AND WARRANTY
ISOONE reserves the right to modify or update this document at any time with-in the framework of the technological evolution and the updating of our tech-nical documentation. Despite the care taken in the design and the updating of this card, it can not under any circumstances constitute a contractual document.
Note
ISOONE is a trademark of La Manufacture de France SAS18 rue Jean Monnet - 31240 Toulouse - FranceEmail : [email protected] / Phone : +33 (0)5 62 89 23 23
RFT_33
RECESSED Cleanroom Luminaire
Xe54-LED
Xe54
_LED
ISO
ON
E-FT
-201
6-V1
-Xe5
4_LE
D_E
N.in
dd - 1
8-05
-17-
1305
Technical sheet
TYPE OF PRODUCTRecessed LED luminaire for operating theatres, IP65, access from below. Low glare optics, IRC higher than 85.Installation in continuous false ceilings.Low width allowing an optimal aesthetic integration in the architecture.
MECHANICAL ENGINEERINGBody made of 0.8mm thick sheet steel, white lacquered with polyester powder coating (RAL9003), classifi ed Qualicoat class 1 and GSB. The fl at return of the body allows optimal application of the seal during installation.Optical low glare frame in white lacquered aluminium, screwed to the box by means of 8 stainless steel screws.
LED MODULESVery high effi ciency LED circuits (> 180 Lm / W) of European brand, screwed on a 2mm thick aluminium plate ensuring optimal dissipation for the product life. Characteristic of leds L90B10 for a lifespan of 50.000h. Low colour dissipation: 3 SDCM. Colour rendering index higher than 85. OPTICOptical unit consisting of a white lacquered aluminium frame, a transparent polycarbonate closure plate and an internal diffuser with three-dimensional mi-cro-prisms. This optic ensures a high mechanical strength associated with a UGR lower than 19. On the other hand the optics being smooth outside fouling is very limited and cleaning very easy.
CONTROL OF CONTAMINATIONThe reduced level of retention and emission of particles obtained on this range of prod-ucts allows their use in cleanrooms classifi ed up to ISO 4.A set of technical seals ensures the sealing, avoids the proliferation of bacteria and reduc-es the gas exchanges.
POWER SUPPLYLuminaires wired with dimmable electronic power supply (push button and DALI), nominal voltage 220/240V 50/60Hz, European brand. Access to the equipment from below the luminaire.
TEMPERATURE AND HUMIDITYReference ambient temperature: 20ºC. Operating temperature range: 5 to 25ºC (the temperature affects the lifetime of the LEDs).For environments with a moisture content of more than 70%, we recommend the use of lacquered INOX 304 for the body, as an option.
INSTALLATIONRecessed in continuous false ceilings to be cut, from 13 to 60 mm thickness:- by means of the shafts supplied as standard, allowing, thanks to the Isofl ex sys-tem, a fi xation from the inside of the luminaire while maintaining the tightness.- by suspension by means of threaded rods (not supplied) attached to the shell.
ELECTRICAL WIRINGPower supply via a PG13 cable gland, connection to a 5 poles automatic terminal block (Phase, Neutral, Earth, D1, D2).
1/2
LED
IP65
CE
IK10PRPC
850ºPRPC
4 ISO
9010
Xe54-LEDTechnical sheet
Xe54
_LED
2/2
PHOTOMETRY
30°
45°
30°
45°
TECHNICAL AND ORDERING DATA
Art. Number Type Shape CUT (mm) P (W) Emited fl ow weight (Kg)
PRPC - Diffuseur micro-prismes polycarbonate
EDO2164GDA Xe54-LED MPPC LED 1197/200 6600/1 65/840 GDA A 180x1180 65 6600 Lm 7
EDO2166GDA Xe54-LED MPPC LED 1497/200 8200/1 75/840 GDA B 180x1480 75 8200 Lm 8
DIMENSIONS (mm)
A & B Shape
1197 (type A) / 1497 (type B)
1162 (type A) / 1462 (type B)
200
163 173
Light and power output tolerance ± 10%
CONFORMITYDownload our EU declaration of conformity in our website.
WARRANTY5 years or 20,000 hours of operation warranty according to our general or special terms and conditions of warranty in force at the moment of purchase, and published on our website.
TEMPERATURE AND SWITCHES ONThe operating temperature and the number of daily switches have an infl uence on the service life of the products. Our LED luminaires are designed to withstand at least 30,000 starts. Consult us for more information.
STANDARDS AND WARRANTY
ISOONE reserves the right to modify or update this document at any time wit-hin the framework of the technological evolution and the updating of our tech-nical documentation. Despite the care taken in the design and the updating of this card, it can not under any circumstances constitute a contractual document.
Note
ISOONE is a trademark of La Manufacture de France SAS18 rue Jean Monnet - 31240 Toulouse - FranceEmail : [email protected] / Phone : +33 (0)5 62 89 23 23
RFT_34
RECESSED Cleanroom Luminaire
Xe54-LED
Xe54
_LED
ISO
ON
E-FT
-201
6-V1
-Xe5
4_LE
D_E
N.in
dd - 1
8-05
-17-
1305
Technical sheet
TYPE OF PRODUCTRecessed LED luminaire for operating theatres, IP65, access from below. Low glare optics, IRC higher than 85.Installation in continuous false ceilings.Low width allowing an optimal aesthetic integration in the architecture.
MECHANICAL ENGINEERINGBody made of 0.8mm thick sheet steel, white lacquered with polyester powder coating (RAL9003), classifi ed Qualicoat class 1 and GSB. The fl at return of the body allows optimal application of the seal during installation.Optical low glare frame in white lacquered aluminium, screwed to the box by means of 8 stainless steel screws.
LED MODULESVery high effi ciency LED circuits (> 180 Lm / W) of European brand, screwed on a 2mm thick aluminium plate ensuring optimal dissipation for the product life. Characteristic of leds L90B10 for a lifespan of 50.000h. Low colour dissipation: 3 SDCM. Colour rendering index higher than 85. OPTICOptical unit consisting of a white lacquered aluminium frame, a transparent polycarbonate closure plate and an internal diffuser with three-dimensional mi-cro-prisms. This optic ensures a high mechanical strength associated with a UGR lower than 19. On the other hand the optics being smooth outside fouling is very limited and cleaning very easy.
CONTROL OF CONTAMINATIONThe reduced level of retention and emission of particles obtained on this range of prod-ucts allows their use in cleanrooms classifi ed up to ISO 4.A set of technical seals ensures the sealing, avoids the proliferation of bacteria and reduc-es the gas exchanges.
POWER SUPPLYLuminaires wired with dimmable electronic power supply (push button and DALI), nominal voltage 220/240V 50/60Hz, European brand. Access to the equipment from below the luminaire.
TEMPERATURE AND HUMIDITYReference ambient temperature: 20ºC. Operating temperature range: 5 to 25ºC (the temperature affects the lifetime of the LEDs).For environments with a moisture content of more than 70%, we recommend the use of lacquered INOX 304 for the body, as an option.
INSTALLATIONRecessed in continuous false ceilings to be cut, from 13 to 60 mm thickness:- by means of the shafts supplied as standard, allowing, thanks to the Isofl ex sys-tem, a fi xation from the inside of the luminaire while maintaining the tightness.- by suspension by means of threaded rods (not supplied) attached to the shell.
ELECTRICAL WIRINGPower supply via a PG13 cable gland, connection to a 5 poles automatic terminal block (Phase, Neutral, Earth, D1, D2).
1/2
LED
IP65
CE
IK10PRPC
850ºPRPC
4 ISO
9010
Xe54-LEDTechnical sheet
Xe54
_LED
2/2
PHOTOMETRY
30°
45°
30°
45°
TECHNICAL AND ORDERING DATA
Art. Number Type Shape CUT (mm) P (W) Emited fl ow weight (Kg)
PRPC - Diffuseur micro-prismes polycarbonate
EDO2164GDA Xe54-LED MPPC LED 1197/200 6600/1 65/840 GDA A 180x1180 65 6600 Lm 7
EDO2166GDA Xe54-LED MPPC LED 1497/200 8200/1 75/840 GDA B 180x1480 75 8200 Lm 8
DIMENSIONS (mm)
A & B Shape
1197 (type A) / 1497 (type B)
1162 (type A) / 1462 (type B)
200
163 173
Light and power output tolerance ± 10%
CONFORMITYDownload our EU declaration of conformity in our website.
WARRANTY5 years or 20,000 hours of operation warranty according to our general or special terms and conditions of warranty in force at the moment of purchase, and published on our website.
TEMPERATURE AND SWITCHES ONThe operating temperature and the number of daily switches have an infl uence on the service life of the products. Our LED luminaires are designed to withstand at least 30,000 starts. Consult us for more information.
STANDARDS AND WARRANTY
ISOONE reserves the right to modify or update this document at any time wit-hin the framework of the technological evolution and the updating of our tech-nical documentation. Despite the care taken in the design and the updating of this card, it can not under any circumstances constitute a contractual document.
Note
ISOONE is a trademark of La Manufacture de France SAS18 rue Jean Monnet - 31240 Toulouse - FranceEmail : [email protected] / Phone : +33 (0)5 62 89 23 23
RFT_35
RFT_36
Panel LED luminaire
IDA
IDA
ISO
ON
E-FT
-201
6-V2
-IDA_
LED
_EN
.indd
1/2
LED
7 2
20IP40
IK06
650°
Classe II
Technical sheet
TYPE OF PRODUCTLow glare led panel very low profi le (11mm), surface or recessed mounting, invisible clamping systems. Wide range of emitted fl ow and dimensions.
MECHANICAL ENGINEERINGFrame made of extruded and welded aluminium, lacquered in white by thermo lacquering with high coating power to maintain the dissipation capacity, RAL 9016. Steel top plate of 0.8mm thickness.
LED MODULELED modules placed on the inner edge of the thick aluminium profi le. High performance LEDs encapsulated on an Epistar chip of medium power of important size, 26x46 thou-sand, thus obtaining better performance and a longer life.
OPTICSOptical assembly consisting of a refl ective sheet incorporating Toray’s Lumirror technolo-gy, a Mitsubishi pmma light guide and a Chimei transparent micro-prismatic diffusing fi lm. Low glare, UGR lower than 19.
ELECTRICAL EQUIPMENTLuminaires equipped with an external driver, European branded ,not dimmable electronic power supply (EPF). Rated voltage 220-240 V. DALI dimming (GDA) available as an option. Foresee a reservation in the plenum for the power supply (70 cm of cable).
TEMPERATUREReference ambient temperature: 20ºC. Operating temperature range: 5 to 25ºC (the tem-perature affects the lifetime of the LEDs).
INSTALLATION- By gravity on the T-bar sections of the false ceiling (safety suspension by steel cable in option)- Surface mounting (with accessory)
WIRINGConnection on the external power supply, with a traction stop system to be tightened and closed (accessories included).
OPTIONS
KIT SAILLIStainless steel frame
L21A1053ACC
30° 30°
60°60°
300
PHOTOMETRYMP (UGR<19)
RFT_37
Cleanroom panel LED - IP65
H1
H1
ISO
ON
E_FT
_H1_
EN.in
dd -
18-0
5-17
-130
5
Technical sheet
TYPE OF PRODUCTLed panel very low profi le (11mm), specially designed for application in cleanrooms, surface mounting, invisible clamping systems. IP65 from above and below, resistant to hydrogen per-oxide, Wide range of emitted fl ow and dimensions, from 1500 to 7000 lumens.
MECHANICAL ENGINEERINGFrame made of extruded and welded aluminium, lacquered in white by thermo lacquering with high coating power to maintain the dissipation capacity, RAL 9016. A system of double internal joints, upper and lower, as well as a top gland press ensure a lasting seal. Steel top plate of 0.8mm thickness.
LED MODULELED modules placed on the inner edge of the thick aluminium profi le. High performance LEDs encapsulated on an Epistar chip of medium power of important size, 26x46 thousand, thus obtaining better performance and a longer life.
OPTICSOptical assembly consisting of a refl ective sheet incorporating Toray’s Lumirror technology, a Mitsubishi pmma light guide and a Chimei white polystyrene diffusing fi lm.
CONTROL OF CONTAMINATIONThe reduced level of retention and emission of particles obtained on this range of products allows their use in cleanrooms classifi ed up to ISO 3.A set of technical seals ensures the sealing, avoids the proliferation of bacteria and reduces the gas exchanges.
H2O2 RESISTANCEComponents that can come into contact with hydrogen peroxide during the decontamination process were tested by cyclic, direct and prolonged contact with a 35% H2O2 solution, see resistance in the table of references.
ELECTRICAL EQUIPMENTLuminaires equipped with an external driver, European branded ,not dimmable electronic power supply (EPF). Rated voltage 220-240 V. DALI dimming (GDA) available as an option. Foresee a reservation in the plenum for the power supply (70 cm of cable)..
TEMPERATURE AND HUMIDITYReference ambient temperature: 20ºC. Operating temperature range: 5 to 25ºC (the tempera-ture affects the lifetime of the LEDs).
INSTALLATIONH1 is available in several versions: - /E gravity mounting, modular ceilings with exposed profi les - /C mounting clipped on metal panel. - /TF threaded rod mounting for laminated panel. - /V direct clamping by screws with conical headExcept for versions / V the fi xings are invisible.Peripheral shadow gap to be fi lled by installer to obtain an invisible sealing.
WIRINGConnection on the external power supply, with a traction stop system to be tightened and closed (accessories included).
1/4
LED
IP65
CE
IK06
650ºOPMI
Ambiante
º25ºC
5 ISO
DETAILS
Art. Number Type B (mm) C (mm) P (W) Flux émis Lm/W UGR K
Versions IP20/40 - MPMI
EDO2104EPF IDA 20/40 MPMI LED 597/597 4400/1 40/840 EPF 597 597 34 4400 Lm 110 <19 4000
EDO2105EPF IDA 20/40 MPMI LED 1197/297 5940/1 54/840 EPF 1197 297 54 5940 Lm 110 <19 4000
TECHNICAL AND ORDERING DATA
IDATechnical sheet
IDA2/2
DIMENSIONS (mm)
B
ISO
ON
E-FT
-201
6-V2
-IDA_
LED
_EN
.indd
Tolérance de production du fl ux lumineux et de consommation ±10%
11C
ISOONE reserves the right to modify or update this document at any time wit-hin the framework of the technological evolution and the updating of our tech-nical documentation. Despite the care taken in the design and the updating of this card, it can not under any circumstances constitute a contractual document.
Note
ISOONE is a trademark of La Manufacture de France SAS18 rue Jean Monnet - 31240 Toulouse - FranceEmail : [email protected] / Phone : +33 (0)5 62 89 23 23
CONFORMITYDownload our EU declaration of conformity in our website.
WARRANTY5 years or 20,000 hours of operation warranty according to our general or special terms and conditions of warranty in force at the moment of purchase, and published on our website.
TEMPERATURE AND SWITCHES ONThe operating temperature and the number of daily switches have an infl uence on the service life of the products. These LED luminaires are designed to withstand at least 10,000 starts. Consult us for more information.
STANDARDS AND WARRANTY
DETAILS
ALUMINIUM FRAME SOLDERED
RFT_38
Cleanroom panel LED - IP65
H1
H1
ISO
ON
E_FT
_H1_
EN.in
dd -
18-0
5-17
-130
5
Technical sheet
TYPE OF PRODUCTLed panel very low profi le (11mm), specially designed for application in cleanrooms, surface mounting, invisible clamping systems. IP65 from above and below, resistant to hydrogen per-oxide, Wide range of emitted fl ow and dimensions, from 1500 to 7000 lumens.
MECHANICAL ENGINEERINGFrame made of extruded and welded aluminium, lacquered in white by thermo lacquering with high coating power to maintain the dissipation capacity, RAL 9016. A system of double internal joints, upper and lower, as well as a top gland press ensure a lasting seal. Steel top plate of 0.8mm thickness.
LED MODULELED modules placed on the inner edge of the thick aluminium profi le. High performance LEDs encapsulated on an Epistar chip of medium power of important size, 26x46 thousand, thus obtaining better performance and a longer life.
OPTICSOptical assembly consisting of a refl ective sheet incorporating Toray’s Lumirror technology, a Mitsubishi pmma light guide and a Chimei white polystyrene diffusing fi lm.
CONTROL OF CONTAMINATIONThe reduced level of retention and emission of particles obtained on this range of products allows their use in cleanrooms classifi ed up to ISO 3.A set of technical seals ensures the sealing, avoids the proliferation of bacteria and reduces the gas exchanges.
H2O2 RESISTANCEComponents that can come into contact with hydrogen peroxide during the decontamination process were tested by cyclic, direct and prolonged contact with a 35% H2O2 solution, see resistance in the table of references.
ELECTRICAL EQUIPMENTLuminaires equipped with an external driver, European branded ,not dimmable electronic power supply (EPF). Rated voltage 220-240 V. DALI dimming (GDA) available as an option. Foresee a reservation in the plenum for the power supply (70 cm of cable)..
TEMPERATURE AND HUMIDITYReference ambient temperature: 20ºC. Operating temperature range: 5 to 25ºC (the tempera-ture affects the lifetime of the LEDs).
INSTALLATIONH1 is available in several versions: - /E gravity mounting, modular ceilings with exposed profi les - /C mounting clipped on metal panel. - /TF threaded rod mounting for laminated panel. - /V direct clamping by screws with conical headExcept for versions / V the fi xings are invisible.Peripheral shadow gap to be fi lled by installer to obtain an invisible sealing.
WIRINGConnection on the external power supply, with a traction stop system to be tightened and closed (accessories included).
1/4
LED
IP65
CE
IK06
650ºOPMI
Ambiante
º25ºC
5 ISO
DETAILS
Art. Number Type B (mm) C (mm) P (W) Flux émis Lm/W UGR K
Versions IP20/40 - MPMI
EDO2104EPF IDA 20/40 MPMI LED 597/597 4400/1 40/840 EPF 597 597 34 4400 Lm 110 <19 4000
EDO2105EPF IDA 20/40 MPMI LED 1197/297 5940/1 54/840 EPF 1197 297 54 5940 Lm 110 <19 4000
TECHNICAL AND ORDERING DATA
IDATechnical sheet
IDA2/2
DIMENSIONS (mm)
B
ISO
ON
E-FT
-201
6-V2
-IDA_
LED
_EN
.indd
Tolérance de production du fl ux lumineux et de consommation ±10%
11C
ISOONE reserves the right to modify or update this document at any time wit-hin the framework of the technological evolution and the updating of our tech-nical documentation. Despite the care taken in the design and the updating of this card, it can not under any circumstances constitute a contractual document.
Note
ISOONE is a trademark of La Manufacture de France SAS18 rue Jean Monnet - 31240 Toulouse - FranceEmail : [email protected] / Phone : +33 (0)5 62 89 23 23
CONFORMITYDownload our EU declaration of conformity in our website.
WARRANTY5 years or 20,000 hours of operation warranty according to our general or special terms and conditions of warranty in force at the moment of purchase, and published on our website.
TEMPERATURE AND SWITCHES ONThe operating temperature and the number of daily switches have an infl uence on the service life of the products. These LED luminaires are designed to withstand at least 10,000 starts. Consult us for more information.
STANDARDS AND WARRANTY
DETAILS
ALUMINIUM FRAME SOLDERED
RFT_39
H1 Technical sheet
H12/4
PHOTOMETRY
Art. Number Type Color Tº IRC (±3) Shape P (W) Emitted fl ow H2O2 weight
Gravity mounting
SUR1028EPF H1-E OP LED 598/598 4250/1 36/840 EPF 4000 K >80 B 36 4250 Lm √ 4,5 Kg
SUR1029EPF H1-E OP LED 296/1196 5150/1 54/840 EPF 4000 K >80 C 54 5150 Lm √ 4,6 Kg
SUR1031EPF H1-E OP LED 298/298 1500/1 18/840 EPF 4000 K >80 A 18 1500 Lm √ 1,5 Kg
SUR1041EPF H1-E OP LED 598/598 4250/1 36/865 EPF 6500 K >80 B 36 4250 Lm √ 4,5 Kg
SUR1042EPF H1-E OP LED 296/1196 5150/1 54/865 EPF 6500 K >80 C 54 5150 Lm √ 4,6 kg
SUR1044EPF H1-E OP LED 298/298 1500/1 18/865 EPF 6500 K >80 A 18 1500 Lm √ 1,5 kg
Mounting clipped on metal panel.
SUR1033EPF H1-C OP LED 598/598 4250/1 36/840 EPF 4000 K >80 B 36 4250 Lm √ 4,5 Kg
SUR1034EPF H1-C OP LED 296/1196 5150/1 54/840 EPF 4000 K >80 C 54 5150 Lm √ 4,6 Kg
SUR1036EPF H1-C OP LED 298/298 1500/1 18/840 EPF 4000 K >80 A 18 1500 Lm √ 1,5 Kg
SUR1045EPF H1-C OP LED 598/598 4250/1 36/865 EPF 6500 K >80 B 36 4250 Lm √ 4,5 Kg
SUR1046EPF H1-C OP LED 296/1196 5150/1 54/865 EPF 6500 K >80 C 54 5150 Lm √ 4,6 kg
SUR1048EPF H1-C OP LED 298/298 1500/1 18/865 EPF 6500 K >80 A 18 1500 Lm √ 1,5 kg
Threaded rod mounting for laminated panel
SUR1037EPF H1-TF OP LED 598/598 4250/1 36/840 EPF 4000 K >80 B 36 4250 Lm √ 4,5 Kg
SUR1038EPF H1-TF OP LED 296/1196 5150/1 54/840 EPF 4000 K >80 C 54 5150 Lm √ 4,6 Kg
SUR1040EPF H1-TF OP LED 298/298 1500/1 18/840 EPF 4000 K >80 A 18 1500 Lm √ 1,5 Kg
SUR1049EPF H1-TF OP LED 598/598 4250/1 36/865 EPF 6500 K >80 B 36 4250 Lm √ 4,5 Kg
SUR1050EPF H1-TF OP LED 296/1196 5150/1 54/865 EPF 6500 K >80 C 54 5150 Lm √ 4,6 kg
SUR1052EPF H1-TF OP LED 298/298 1500/1 18/865 EPF 6500 K >80 A 18 1500 Lm √ 1,5 kg
Direct clamping by screws with conical head
SUR1060EPF H1-V OP LED 598/598 4250/1 36/840 EPF 4000 K >80 B 36 4250 Lm √ 4,5 Kg
SUR1061EPF H1-V OP LED 296/1196 5150/1 54/840 EPF 4000 K >80 C 54 5150 Lm √ 4,6 Kg
SUR1063EPF H1-V OP LED 298/298 1500/1 18/840 EPF 4000 K >80 A 18 1500 Lm √ 1,5 Kg
TECHNICAL AND ORDERING DATA
30° 30°
60°60°
300
For other color temperatures please contact usLight and power output tolerance ± 10%
RFT_40
H1Technical sheet
H13/4
DIMENSIONS (mm)
C Shape
B Shape
A Shape 5
98
598 11
19
295
,50
593
593
298
298
11
19
140
293
293
1198
298
11
RFT_41
H1Technical sheet
H14/4
Art. Number Type Art. Number Type
Drilling templates
A1009ACC H1/C - Driling template 600/600 A1014ACC H1/TF - Driling template 600/600
A1010ACC H1/C - Driling template 300/1200 A1015ACC H1/TF - Driling template 300/1200
A1011ACC H1/C - Driling template 300/1500 A1016ACC H1/TF - Driling template 300/1500
A1012ACC H1/C - Driling template 300/300 A1017ACC H1/TF - Driling template 300/300
Safety steel cable
A1013ACC H1/P15 - Filin de sécurité
ACCESSORIES
OPTIONS
CONFORMITYDownload our EU declaration of conformity in our website.
WARRANTY3 years or 15,000 hours of operation warranty according to our general or special terms and conditions of warranty in force at the moment of purchase, and published on our website.
TEMPERATURE AND SWITCHES ONThe operating temperature and the number of daily switches have an infl uence on the service life of the products. This LED luminaires range is designed to withstand at least 20,000 starts. Consult us for more information.
STANDARDS AND WARRANTY
ISOONE reserves the right to modify or update this document at any time wit-hin the framework of the technological evolution and the updating of our tech-nical documentation. Despite the care taken in the design and the updating of this card, it can not under any circumstances constitute a contractual document.
Note
ISOONE is a trademark of La Manufacture de France SAS18 rue Jean Monnet - 31240 Toulouse - FranceEmail : [email protected] / Phone : +33 (0)5 62 89 23 23
LIGHT SPECTRUM
Résultats des mesures spectrales
Distribution spectrale moyenne du flux lumineux (normalisé)
MAE16
LMA
200nm 1000nm
Condition des essais = mesure spectrale dans l'axe à une distance où E = 500 lux
IES tr LDT tr RPT tr
Rapport de mesure
RPT171812v01DOCUMENT CONFIDENTIEL (MOD150219)
LED ENGINEERING DEVELOPMENT7 Rue Bénédict Prévost - 82000 MONTAUBAN
Tel : 05 63 66 42 [email protected]
SARL au capital de 80000€ - R.C.S. MONTAUBANN° de Siret : 495 333 544 – Code NAF : 7112B
TVA Intracommunautaire : FR26495333544
1
Auteur du document :
Mesure spectrale
Identifiant du projet :
RPT171812v01Identifiant du document :
Ref Luminaire : SUR1019EPFMAE16AA
Résultats des mesures spectrales
L.E.DConfidentiel 1/1
Spectral measurement of H1 panel, color temperature 4000 K.
Luminaire measurement in the axis at a distance or E = 500 Lux.
RFT_42
RED SAFELIGHT PANEL LED - IP65
H1_LED_WR
H1_
LED
ISO
ON
E-FT
-201
6-H
1-W
R_LE
D_E
N.in
dd - 1
8-05
-17-
1305
Technical sheet
1/3
LED
IP65
CE
IK06
650ºOPMI
Ambiante
º25ºC
5 ISO
TYPE OF PRODUCTLed panel very low profi le (11mm), specially designed for application in cleanrooms, surface mounting, invisible clamping systems. IP65 from above and below, resistant to hydrogen per-oxide, Wide range of emitted fl ow and dimensions, from 1500 to 7000 lumens. Hybrid safe-light red (620 nm) and white (4000K) lighting, with two independent cir-cuits.
MECHANICAL ENGINEERINGFrame made of extruded and welded aluminium, lacquered in white by thermo lacquering with high coating power to maintain the dissipation capacity, RAL 9016. A system of double internal joints, upper and lower, as well as a top gland press ensure a lasting seal. Steel top plate of 0.8mm thickness.
LED MODULELED modules placed on the inner edge of the thick aluminium profi le. High performance LEDs encapsulated on an Epistar chip of medium power of important size, 26x46 thousand, thus obtaining better performance and a longer life.
OPTICSOptical assembly consisting of a refl ective sheet incorporating Toray’s Lumirror technology, a Mitsubishi pmma light guide and a Chimei white polystyrene diffusing fi lm.
CONTROL OF CONTAMINATIONThe reduced level of retention and emission of particles obtained on this range of products allows their use in cleanrooms classifi ed up to ISO 5.A set of technical seals ensures the sealing, avoids the proliferation of bacteria and reduces the gas exchanges.
H2O2 RESISTANCEComponents that can come into contact with hydrogen peroxide during the decontamination process were tested by cyclic, direct and prolonged contact with a 35% H2O2 solution, see resistance in the table of references.
POWER SUPPLYLuminaires equipped with two externals drivers. European branded ,not dimmable electronic power supply (EPF). Rated voltage 220-240 V. DALI dimming (GDA) available as an option. Foresee a reservation in the plenum for the power supply (70 cm of cable)..
TEMPERATURE AND HUMIDITYReference ambient temperature: 20ºC. Operating temperature range: 5 to 25ºC (the tempera-ture affects the lifetime of the LEDs).
INSTALLATIONH1 is available in several versions: - /E gravity mounting, modular ceilings with exposed profi les - /C mounting clipped on metal panel. - /TF threaded rod mounting for laminated panel. - /V direct clamping by screws with conical headExcept for versions / V the fi xings are invisible.Peripheral shadow gap to be fi lled by installer to obtain an invisible sealing.
WIRINGConnection on the external power supply, with a traction stop system to be tightened and closed (accessories included).
H1Technical sheet
H14/4
Art. Number Type Art. Number Type
Drilling templates
A1009ACC H1/C - Driling template 600/600 A1014ACC H1/TF - Driling template 600/600
A1010ACC H1/C - Driling template 300/1200 A1015ACC H1/TF - Driling template 300/1200
A1011ACC H1/C - Driling template 300/1500 A1016ACC H1/TF - Driling template 300/1500
A1012ACC H1/C - Driling template 300/300 A1017ACC H1/TF - Driling template 300/300
Safety steel cable
A1013ACC H1/P15 - Filin de sécurité
ACCESSORIES
OPTIONS
CONFORMITYDownload our EU declaration of conformity in our website.
WARRANTY3 years or 15,000 hours of operation warranty according to our general or special terms and conditions of warranty in force at the moment of purchase, and published on our website.
TEMPERATURE AND SWITCHES ONThe operating temperature and the number of daily switches have an infl uence on the service life of the products. This LED luminaires range is designed to withstand at least 20,000 starts. Consult us for more information.
STANDARDS AND WARRANTY
ISOONE reserves the right to modify or update this document at any time wit-hin the framework of the technological evolution and the updating of our tech-nical documentation. Despite the care taken in the design and the updating of this card, it can not under any circumstances constitute a contractual document.
Note
ISOONE is a trademark of La Manufacture de France SAS18 rue Jean Monnet - 31240 Toulouse - FranceEmail : [email protected] / Phone : +33 (0)5 62 89 23 23
LIGHT SPECTRUM
Résultats des mesures spectrales
Distribution spectrale moyenne du flux lumineux (normalisé)
MAE16
LMA
200nm 1000nm
Condition des essais = mesure spectrale dans l'axe à une distance où E = 500 lux
IES tr LDT tr RPT tr
Rapport de mesure
RPT171812v01DOCUMENT CONFIDENTIEL (MOD150219)
LED ENGINEERING DEVELOPMENT7 Rue Bénédict Prévost - 82000 MONTAUBAN
Tel : 05 63 66 42 [email protected]
SARL au capital de 80000€ - R.C.S. MONTAUBANN° de Siret : 495 333 544 – Code NAF : 7112B
TVA Intracommunautaire : FR26495333544
1
Auteur du document :
Mesure spectrale
Identifiant du projet :
RPT171812v01Identifiant du document :
Ref Luminaire : SUR1019EPFMAE16AA
Résultats des mesures spectrales
L.E.DConfidentiel 1/1
Spectral measurement of H1 panel, color temperature 4000 K.
Luminaire measurement in the axis at a distance or E = 500 Lux.
RFT_43
H1_LED_WRTechnical sheet
H1_
LED
2/3
PHOTOMETRY
Art. Number Type Color Tº Shape P (W) Emitted fl ow4000 K
Emitted fl ow625 nm H2O2
Gravity mounting
SUR1053EPF H1-E OP W/R LED 598/598 3800/1 36/840 EPF 4000 K A 40+20 3800 Lm 1000 Lm ok
Mounting clipped on metal panel.
SUR1054EPF H1-C OP W/R LED 598/598 3800/1 36/840 EPF 4000 K A 40+20 3800 Lm 1000 Lm ok
Threaded rod mounting for laminated panel
SUR1055EPF H1-TF OP W/R LED 598/598 3800/1 36/840 EPF 4000 K A 40+20 3800 Lm 1000 Lm ok
Direct clamping by screws with conical head
SUR1056EPF H1-V OP W/R LED 598/598 3800/1 36/840 EPF 4000 K A 40+20 3800 Lm 1000 Lm ok
ORDERING AND TECHNICAL DATA
OPTIONS
DETAILS
30° 30°
60°60°
300
Art Number Tyoe Art Number Tyoe
Drilling templates
A1009ACC H1/C - Drilling template 600/600 A1014ACC H1/TF - Drilling template 600/600
Safety steel cable
A1013ACC H1/P15 - Safety steel cable
ACCESSORIES
L.E.D Confidentiel
Distribution spectrale moyenne du flux lumineux (normalisé)
. 1
0 780
Distribution spatiale de l'émission lumineuse
Données du fichier IES :
Puiss 42W
Flux 4373.51 lm
Coordonnées Chromatiques X : 0.3740 Y : 0.3749
RPT180111v01(MOD150219)
1 / Résultats des mesures spectrales Réglage 4000K
#REF!
L.E.DConfidentiel 2/4
WHITE 4000 K
LIGHT SPECTRUML.E.D Confidentiel
Distribution spectrale moyenne du flux lumineux (normalisé)
. 1
0 780
Distribution spatiale de l'émission lumineuse
Données du fichier IES :
Puiss 43.4 W
Flux 1053.93 lm
Coordonnées Chromatiques X : 0.6956 Y : 0.3011
#REF! RPT180111v01(MOD150219)
2 / Résultats des mesures spectrales Réglage RED Alim Fournie
L.E.DConfidentiel 3/4
RED SAFELIGHT (620-640nm)
Light and power output tolerance ± 10%
H1_LED_WRTechnical sheet
H1_
LED
3/3
DIMENSIONS (mm)
A Shape
598
598 11
19
295
,50
593
593
CONFORMITYDownload our EU declaration of conformity in our website.
WARRANTY3 years or 15,000 hours of operation warranty according to our general or special terms and conditions of warranty in force at the moment of purchase, and published on our website.
TEMPERATURE AND SWITCHES ONThe operating temperature and the number of daily switches have an infl uence on the service life of the products. Our LED luminaires are designed to withstand at least 30,000 starts. Consult us for more information.
STANDARDS AND WARRANTY
ISOONE reserves the right to modify or update this document at any time wit-hin the framework of the technological evolution and the updating of our tech-nical documentation. Despite the care taken in the design and the updating of this card, it can not under any circumstances constitute a contractual document.
Note
ISOONE is a trademark of La Manufacture de France SAS18 rue Jean Monnet - 31240 Toulouse - FranceEmail : [email protected] / Phone : +33 (0)5 62 89 23 23
RFT_44
H1_LED_WRTechnical sheet
H1_
LED
3/3
DIMENSIONS (mm)
A Shape 5
98
598 11
19
295
,50
593
593
CONFORMITYDownload our EU declaration of conformity in our website.
WARRANTY3 years or 15,000 hours of operation warranty according to our general or special terms and conditions of warranty in force at the moment of purchase, and published on our website.
TEMPERATURE AND SWITCHES ONThe operating temperature and the number of daily switches have an infl uence on the service life of the products. Our LED luminaires are designed to withstand at least 30,000 starts. Consult us for more information.
STANDARDS AND WARRANTY
ISOONE reserves the right to modify or update this document at any time wit-hin the framework of the technological evolution and the updating of our tech-nical documentation. Despite the care taken in the design and the updating of this card, it can not under any circumstances constitute a contractual document.
Note
ISOONE is a trademark of La Manufacture de France SAS18 rue Jean Monnet - 31240 Toulouse - FranceEmail : [email protected] / Phone : +33 (0)5 62 89 23 23
RFT_45
RFT_46
YELLOW SAFELIGHT PANEL LED - IP65
H1_LED_YE
H1_
LED
ISO
ON
E-FT
-201
6-H
1-YE
_LED
_EN
.indd
- 18
-05-
17-1
305
Technical Sheet
1/3
LED
IP65
CE
IK06
650ºOPMI
Ambiante
º25ºC
5 ISO
TYPE OF PRODUCTLed panel very low profi le (11mm), specially designed for application in cleanrooms, surface mounting, invisible clamping systems. IP65 from above and below, resistant to hydrogen per-oxide, Yellow 580nm safe-light.
MECHANICAL ENGINEERINGFrame made of extruded and welded aluminium, lacquered in white by thermo lacquering with high coating power to maintain the dissipation capacity, RAL 9016. A system of double internal joints, upper and lower, as well as a top gland press ensure a lasting seal. Steel top plate of 0.8mm thickness.
LED MODULELED modules placed on the inner edge of the thick aluminium profi le. High performance LEDs encapsulated on an Epistar chip of medium power of important size, 26x46 thousand, thus obtaining better performance and a longer life.
OPTICSOptical assembly consisting of a refl ective sheet incorporating Toray’s Lumirror technology, a Mitsubishi pmma light guide and a Chimei white polystyrene diffusing fi lm.
CONTROL OF CONTAMINATIONThe reduced level of retention and emission of particles obtained on this range of products allows their use in cleanrooms classifi ed up to ISO 5.A set of technical seals ensures the sealing, avoids the proliferation of bacteria and reduces the gas exchanges.
H2O2 RESISTANCEComponents that can come into contact with hydrogen peroxide during the decontamination process were tested by cyclic, direct and prolonged contact with a 35% H2O2 solution, see resistance in the table of references.
POWER SUPPLYLuminaires equipped with an external driver. European branded ,not dimmable electronic power supply (EPF). Rated voltage 220-240 V. DALI dimming (GDA) available as an option. Foresee a reservation in the plenum for the power supply (70 cm of cable)..
TEMPERATURE AND HUMIDITYReference ambient temperature: 20ºC. Operating temperature range: 5 to 25ºC (the tempera-ture affects the lifetime of the LEDs).
INSTALLATIONH1 is available in several versions: - /E gravity mounting, modular ceilings with exposed profi les - /C mounting clipped on metal panel. - /TF threaded rod mounting for laminated panel. - /V direct clamping by screws with conical headExcept for versions / V the fi xings are invisible.Peripheral shadow gap to be fi lled by installer to obtain an invisible sealing.
WIRINGConnection on the external power supply, with a traction stop system to be tightened and closed (accessories included).
RFT_47
H1_LED_YETechnical Sheet
H1_
LED
2/3
Art. number Type Shape P (W) Emitted fl ow H2O2
Gravity mounting
SUR1057EPF H1-E OP YE LED 598/598 2800/1 36/840 EPF A 36 W 2800 Lm ok
Mounting clipped on metal panel.
SUR1058EPF H1-C OP YE LED 598/598 2800/1 36/840 EPF A 36 W 2800 Lm ok
Threaded rod mounting for laminated panel
SUR1059EPF H1-TF OP YE LED 598/598 2800/1 36/840 EPF A 36 W 2800 Lm ok
Direct clamping by screws with conical head
SUR1067EPF H1-V OP YE LED 598/598 3800/1 36/840 EPF A 36 W 2800 Lm ok
ORDERING AND TECHNICAL DATA
OPTIONS
DETAILS
30° 30°
60°60°
300
YELLOW SAFELIGHT (580-600 NM)
PHOTOMETRY LIGHT SPECTRUM
Light and power output tolerance ± 10%
Art Number Tyoe Art Number Tyoe
Drilling templates
A1009ACC H1/C - Drilling templates 600/600 A1014ACC H1/TF - Drilling templates 600/600
Safety steel cable
A1013ACC H1/P15 - Safety steel cable
ACCESSORIES
RFT_48
H1_LED_YETechnical Sheet
H1_
LED
3/3
DIMENSIONS (mm)
Shape A
598
598 11
19
295
,50
593
593
CONFORMITYDownload our EU declaration of conformity in our website.
WARRANTY3 years or 15,000 hours of operation warranty according to our general or special terms and conditions of warranty in force at the moment of purchase, and published on our website.
TEMPERATURE AND SWITCHES ONThe operating temperature and the number of daily switches have an infl uence on the service life of the products. Our LED luminaires are designed to withstand at least 30,000 starts. Consult us for more information.
STANDARDS AND WARRANTY
ISOONE reserves the right to modify or update this document at any time wit-hin the framework of the technological evolution and the updating of our tech-nical documentation. Despite the care taken in the design and the updating of this card, it can not under any circumstances constitute a contractual document.
Note
ISOONE is a trademark of La Manufacture de France SAS18 rue Jean Monnet - 31240 Toulouse - FranceEmail : [email protected] / Phone : +33 (0)5 62 89 23 23 RFT_49
SURFACE Cleanroom Luminaire
SIRIUS
Siriu
s_LE
D
ISO
ON
E-FT
-201
6-V1
-Siri
us_L
ED_E
N.in
dd - 1
8-05
-17-
1305
Technical sheet
TYPE OF PRODUCTLED surface luminaire, IP65 all around, access from below. Low profi le, built-in power supply.
MECHANICAL CONSTRUCTIONInverted pyramidal body, made of 0.8 mm thick steel sheet, powder-coated white pol-yester RAL9003. Lower frame in white lacquered aluminium, screwed to the box by means of 4 stainless steel screws.
LED MODULESZagha mid-power LED module. 3 SDCM colour space, IRC above 85. Estimated life-time L80B10 at 50.000h.
OPTICS- OPPC : opal plate in PC. High mechanical resistance.- OPMI : opal plate in PMMA of high light transmission. High chemical resistance.
CONTROL OF CONTAMINATIONThe reduced level of retention and emission of particles obtained on this range of products allows their use in cleanrooms classifi ed up to ISO 3.A set of technical seals ensures the sealing, avoids the proliferation of bacteria and reduces the gas exchanges.
H2O2 RESISTANCEComponents that can come into contact with hydrogen peroxide during the decon-tamination process were tested by cyclic, direct and prolonged contact with a 35% H2O2 solution, see resistance in the table of references.
POWER SUPPLYLuminaires equipped with European branded not dimmable electronic power supply (EPF). Rated voltage 240 V. DALI dimming (GDA) available as an option. Access to the equipment from below.
TEMPERATURE AND HUMIDITYReference ambient temperature: 20ºC. Operating temperature range: 5 to 25ºC (the temperature affects the lifetime of the LEDs).For environments with a moisture content of more than 70%, we recommend the use of lacquered INOX 304 for the body, as an option.
MOUNTING4 points fi xing by the interior of the luminaire.
WIRINGCable entry on the top of the body by a membrane cable seal. Connection inside the body on terminal block 2 poles + ground, without possibility of derivation.
1/2
LED
IP65
CE
960ºOPPC
Ambiante
º25ºC
5 ISO
650ºOPMI
IK07OPMI
IK08OPPC
PHOTOMETRY OPTIONS
304 INOX
Caisson
RFT_50
SIRIUSTechnical sheet
SIRI
US_
LED
2/2
DIMENSIONS (mm)
A Shape
Art. Number Type Shape P (W) Emitted fl ow UGR H2O2
OPPC - Polycarbonate opal plate
SUR1000EPF SIRIUS OPPC LED 480/480 3300 37/840 EPF A 37 3300 Lm <22 •SUR1002EPF SIRIUS OPPC LED 1020/310 3600 40/840 EPF B 40 3600 Lm <22 •OPMI - PMMA opal plate
SUR1001EPF SIRIUS OPMI LED 480/480 3700 37/840 EPF A 37 3700 Lm <22 •SUR1003EPF SIRIUS OPMI LED 1020/310 4200 40/840 EPF B 40 4200 Lm <22 •
ORDERING AND TECHNICAL DATA
480
480
380
380
151
29
53
ISOONE reserves the right to modify or update this document at any time wit-hin the framework of the technological evolution and the updating of our tech-nical documentation. Despite the care taken in the design and the updating of this card, it can not under any circumstances constitute a contractual document.
Note
ISOONE is a trademark of La Manufacture de France SAS18 rue Jean Monnet - 31240 Toulouse - FranceEmail : [email protected] / Phone : +33 (0)5 62 89 23 23
CONFORMITYDownload our EU declaration of conformity in our website.
WARRANTY5 years or 30,000 hours of operation warranty according to our general or special terms and condi-tions of warranty in force at the moment of purchase, and published on our website.
TEMPERATURE AND SWITCHES ONThe operating temperature and the number of daily switches have an infl uence on the service life of the products. Our LED luminaires are designed to withstand at least 30,000 starts. Consult us for more information.
STANDARDS AND WARRANTY
1019
820
120
36
AUTEUR
VERIF.
APPR.
FAB.
QUAL.
SAUF INDICATION CONTRAIRE:LES COTES SONT EN MILLIMETRESETAT DE SURFACE:TOLERANCES: LINEAIRES: ANGULAIRES:
FINITION:
NOM SIGNATURE DATE
MATERIAU:
NE PAS CHANGER L'ECHELLE REVISION
TITRE:
No. DE PLAN
ECHELLE:1:5 FEUILLE 1 SUR 1
A3Matériau <non spécifié>
N/D
Nº de Plan
FC 03-05-18
SI_LU_SUR1003EPFOPMI
SIRIUS OPMI LED 1020/310 4200 40/840
A A
B B
C C
D D
E E
F F
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
FC000000
Epaisseur (mm): ND
1
Dossier de rangement :
SI - Sirius
0Surface (m2)
Sauf indication contraire les cotes de pliage sont toujours EXTÉRIEURES
La Manufacture de France SAS
SI_LU_SUR1003EPFOPMIFICHIER
B Shape
Light and power output tolerance ± 10%
RFT_51
Luminaires ÉTANCHES
ETOG G2
ETOG_G2_LEDL21-
FT-2
016-
V4-E
TOG
-LED
-G2_
EN.in
dd -
1805
1713
05
TYPE OF PRODUCTIP65 waterproof luminaires with LED modules.
MECHANICAL CONSTRUCTIONProfi le of bi-extruded polycarbonate, UV protected. The posterior part is opaque RAL7015 colour while the anterior part is opal translucent to ensure optimal light transmission. Two end caps in RAL 7035 polycarbonate are glued on the profi le ensuring a high level and durable waterproofs.
OPTICSInternal platinum in white lacquered steel and opal polycarbonate profi le ensure extensive distribution.
MODULES LEDMid-power LED modules. Assembled on a steel plate ensuring optimal cooling. IRC greater than 80. The estimated lifetime at Ta 25ºC is 35.000h for L80.Operating range -5º to + 35º C.The service life is variable depending on the operating temperature.
POWER SUPPLYNo dimmable electronic power supply to ensure constant photometric character-istics of the luminaire. 220-240 V, 50-60Hz. Mono-bloc luminaire without access to equipment. DALI dimming on request.
WIRINGBy waterproof connector from the outside of the luminaire, Stucchi branded.Possibility of through wiring 3G1.5mm2 (CTR).
MOUNTINGFixing the body to the support by two clipped stainless steel brackets, no drilling of the body is necessary. IP66 luminaire, do not expose directly to the rain.
FOODSTUFFSLuminaires compliant with Regulation (EC) No 852/2004 on the hygiene of food-stuffs.
IP66
IK08
CE
850°
1/2
LED
30° 30°
45°45°
Technical sheet
PHOTOMETRY
RFT_52
Ref. Number Type P (W) L (mm) D (mm) Flux (Lm)* Lm/W
Body and diff. in bi-extruded polycarbonate. Outdoor Stucchi plug-in connector.
SUR1027EPF ETOG OPPC LED 640/78 2200/1 21/840 EPF 21 W 640 348 2200 104
SUR1009EPF ETOG OPPC LED 1200/78 4100/1 37/840 EPF 37 W 1200 800 4100 108
SUR1010EPF ETOG OPPC LED 1480/78 5850/1 52/840 EPF 52 W 1480 1100 5850 109
Versions through wiring
SUR1017EPF ETOG OPPC/CTR LED 1200/78 4100/1 37/840 EPF 37 W 1200 800 4100 104
SUR1018EPF ETOG OPPC/CTR LED 1480/78 5850/1 52/840 EPF 52 W 1480 1100 5850 109
* Total luminous fl ux of the luminaire, color temperature 4000 K
ORDERING AND TECHNICAL DATA
ETOG_G2_LEDTechnical sheet
ETO
G_G
2_LE
D
2/2
DIMENSIONS (mm)
L21-
FT-2
016-
V4-E
TOG
-LED
-G2_
EN.in
dd -
1805
1713
05
DETAILS
CONSTRUCTION DETAILS, Factory Bonded Tips, Inaccessible power supply
Light and power output tolerance ± 10%
ISOONE reserves the right to modify or update this document at any time wit-hin the framework of the technological evolution and the updating of our tech-nical documentation. Despite the care taken in the design and the updating of this card, it can not under any circumstances constitute a contractual document.
Note
ISOONE is a trademark of La Manufacture de France SAS18 rue Jean Monnet - 31240 Toulouse - FranceEmail : [email protected] / Phone : +33 (0)5 62 89 23 23
CONFORMITYDownload our EU declaration of conformity in our website.
WARRANTY3 years or 15,000 hours of operation warranty according to our general or special terms and conditions of warranty in force at the moment of purchase, and published on our website.
TEMPERATURE AND SWITCHES ONThe operating temperature and the number of daily switches have an infl uence on the ser-vice life of the products. These LED luminaires are designed to withstand at least 10,000 starts. Consult us for more information.
STANDARDS AND WARRANTY
Luminaires ÉTANCHES
ETOG G2
ETOG_G2_LEDL21-
FT-2
016-
V4-E
TOG
-LED
-G2_
EN.in
dd -
1805
1713
05
TYPE OF PRODUCTIP65 waterproof luminaires with LED modules.
MECHANICAL CONSTRUCTIONProfi le of bi-extruded polycarbonate, UV protected. The posterior part is opaque RAL7015 colour while the anterior part is opal translucent to ensure optimal light transmission. Two end caps in RAL 7035 polycarbonate are glued on the profi le ensuring a high level and durable waterproofs.
OPTICSInternal platinum in white lacquered steel and opal polycarbonate profi le ensure extensive distribution.
MODULES LEDMid-power LED modules. Assembled on a steel plate ensuring optimal cooling. IRC greater than 80. The estimated lifetime at Ta 25ºC is 35.000h for L80.Operating range -5º to + 35º C.The service life is variable depending on the operating temperature.
POWER SUPPLYNo dimmable electronic power supply to ensure constant photometric character-istics of the luminaire. 220-240 V, 50-60Hz. Mono-bloc luminaire without access to equipment. DALI dimming on request.
WIRINGBy waterproof connector from the outside of the luminaire, Stucchi branded.Possibility of through wiring 3G1.5mm2 (CTR).
MOUNTINGFixing the body to the support by two clipped stainless steel brackets, no drilling of the body is necessary. IP66 luminaire, do not expose directly to the rain.
FOODSTUFFSLuminaires compliant with Regulation (EC) No 852/2004 on the hygiene of food-stuffs.
IP66
IK08
CE
850°
1/2
LED
30° 30°
45°45°
Technical sheet
PHOTOMETRY
RFT_53
Luminaires ÉTANCHES
LEDETOG
LEDETOGL21-
FT-2
016-
V4-L
EDET
OG
_EN
.indd
- 18
0517
1305
TYPE OF PRODUCTWaterproof LED module luminaires IP66 for extreme conditions.
MECHANICAL CONSTRUCTIONEN-47100 aluminium alloy body injected and powder coated RAL7035. Opal dif-fuser in polycarbonate or pmma. One-piece polyurethane seals set on the body with lockable stainless steel locks.
LED MODULESMid-power LED modules. Assembled on the aluminium base. IRC higher than 80. The estimated lifetime at Ta 25ºC is 50.000h for L80.
OPTICS - OPPC : special diffusing polycarbonate LED, recommended for its high impact resistance - OPMI : Special LED diffusing PMMA recommended for its resistance to chemical agents.
TEMPERATURE AND HUMIDITYOperating range -30º to + 45º C (the temperature affects the life of the LEDs).Luminaire equipped with a Gore event to prevent the accumulation of conden-sation inside the luminaire in case of temperature and humidity gradient that can generate a dew point.
POWER SUPPLYNo dimmable electronic power supply to ensure constant photometric character-istics of the luminaire. 220-240 V, 50-60Hz. Monobloc luminaire without access to equipment. DALI diming on request.
WIRINGBy waterproof connector from the outside of the luminaire, Stucchi branded.Possibility of through wiring 3G1.5mm2 (CTR).
MOUNTINGFixing the body to the support by two clipped stainless steel brackets, no drilling of the body is necessary.IP66 luminaire, do not expose to the weather.
IP66
CE
1/2
LEDTechnical Sheet
IK08OPPC
IK03OPMI
850ºOPPC
650ºOPMI
CONFORMITYDownload our EU declaration of conformity in our website.
WARRANTY5 years or 20,000 hours of operation warranty according to our general or special terms and conditions of warranty in force at the moment of purchase, and pub-lished on our website.
TEMPERATURE AND SWITCHES ONThe operating temperature and the number of daily switches have an infl uence on the service life of the products. Our LED luminaires are designed to withstand at least 30,000 starts. Consult us for more information.
STANDARDS AND WARRANTY
RFT_54
Art. Number Type P (W) EMITTED FLOW (Lm) Lm/W
OPPC
SUR1011EPF LEDETOG OPPC LED 1047/95 4200/1 31/840 EPF 31 W 4200 135
SUR1012EPF LEDETOG OPPC LED 1047/95 6000/1 44/840 EPF 44 W 6000 135
PMMA
SUR1013EPF LEDETOG OPMI LED 1047/95 4300/1 31/840 EPF 31 W 4300 135
SUR1014EPF LEDETOG OPMI LED 1047/95 6100/1 44/840 EPF 44 W 6100 135
ORDERING AND TECHNICAL DATA
LEDETOGTechnical Sheet
LED
ETO
G
2/2
DIMENSIONS (mm)
L21-
FT-2
016-
V4-L
EDET
OG
_EN
.indd
- 18
0517
1305
30° 30°
45°45°
PHOTOMETRY
ISOONE reserves the right to modify or update this document at any time wit-hin the framework of the technological evolution and the updating of our tech-nical documentation. Despite the care taken in the design and the updating of this card, it can not under any circumstances constitute a contractual document.
Note
ISOONE is a trademark of La Manufacture de France SAS18 rue Jean Monnet - 31240 Toulouse - FranceEmail : [email protected] / Phone : +33 (0)5 62 89 23 23
Light and power output tolerance ± 10%
RFT_55
ISOONE, La Manufacture de France18 rue Jean Monnet31240 SAINT-JEAN
Tel . +33 5 62 89 23 22Fax. +33 5 62 89 23 29
Mail : [email protected] : www.isoone.eu