TECHNICAL APPLICATIONS - Jet-Lube Canadajetlubecanada.com/brochures/Technical_Applications.pdf ·...

J e t - L u b e o f C a n a d a L t d .

TECHNICAL APPLICATIONS Anti-Seize, Sealants and Lubricants

2 Rev. Date 01-09-2017

TABLE OF CONTENTS

ANTI-SEIZE COMPOUNDS 3

CLEANERS AND DEGREASERS 5

DRILLING AND COMPLETION COMPOUNDS 6

ECO CERTIFIED PRODUCTS 9

EP GREASES 11

FOOD GRADE PRODUCT 13

HDD & WATERWELL PRODUCTS 14

LUBRICANTS 15

MARINE PRODUCTS 17

PENETRANTS AND COATINGS 17

STORAGE PRODUCTS 18

THREAD SEALANTS 18

VALVE PRODUCTS 19

SPECIALTY PRODUCTS 21

WATER WELL PRODUCTS - Design Water 22

3Rev. Date 01-09-2017

Anti-Seize Compounds

550 - Molybdenum Disulphide Anti-Seize• Metal free • For use on steel, brass, stainless, etc.• Contains MoS

2 and synthetic graphite • Ideal for use in petrochemical plants

• Not affected by vibration, expansion or contraction • Conforms to MIL-PRF-907E• -54°C to 1,316°C (-65°F to 2,400°F) • Part No. 155_ _

550 Extreme - Non-Metallic Anti-Seize• Metal free • Use on threaded connections and flange faces• Contains MoS

2 and synthetic graphite • Ideal where exposed to chemicals and gases

• Enhanced rust and corrosion resistance • Conforms to MIL-PRF-907E• -54°C to 1,316°C (-65°F to 2,400°F) • Part No. 471_ _

550 Extreme All-Weather - Non-Metallic Anti-Seize• Brushable to -40°C (-40°F) • Contains MoS

2 and synthetic graphite

• Fortified with rust and corrosion inhibitors • Well suited for steel and aluminum• Will not harden, evaporate or settle out • Conforms to MIL-PRF-907E• -54°C to 1,316°C (-65°F to 2,400°F) • Part No. 472_ _

ECF Anti-Seize - Environmental Anti-Seize Compound• Metal free • Excellent on high chrome or nickel alloys• Non-toxic and biodegradable • For chemical exposure/corrosive environments• Non-conductive • NSF H-2 registered• -54°C to 1,427°C (-65°F to 2,600°F) • Part No. 289_ _

Graphite Petrolatum - Anti-Seize for Aircraft Spark Plugs• Graphite paste • Electrically conductive• Designed for aircraft engine spark plugs • Good for corrosion resistant metals• Not for use on aluminum, zinc or cadmium alloys • Conforms to SAE-AMS-2518• -54°C to 482°C (-55°F to 900°F) • Part No. 272 _ _

Kopr-Kote - High Temperature Anti-Seize Compound• Copper and graphite paste • Non-melting grease base• Prevents seizure, heat-freeze and galling • Industry standard for anti-seize applications• Available in aerosol form • Conforms to MIL-PRF-907E• -54°C to 815°C (-65°F to 1,500°F) • Part No. 102 _ _

Marine Grade Anti-Seize - Non-Metallic Paste• Metal free formulation • Formulated for marine and offshore applications• High film strength • Contains MoS

2 for extreme pressures

• Resistant to water, salt spray, steam, etc. • Fills voids and imperfections on thread surfaces• -54°C to 1,316°C (-65°F to 2,400°F) • Part No. 497_ _

Moly Petrolatum - Anti-Seize Compound• Metal free, contains MoS

2 • For use on spark plug threads, frame fasteners

• Works well with parts of dissimilar metals • Lowers friction, reduces wrench torque• A thin coating is all that is required • Meets MIL - PRF-83483E• -54°C to 427°C (-65°F to 800°F) • Part No. 262 _ _

MP-50 - Moly Paste• Contains a high percentage of MoS

2 • Use where extreme pressure is encountered

• Non-melting and water resistant • Ideal for use as a valve stem lubricant• Plates metallic surfaces, bonds to metal • Prevents stick-slip• -25°C to 400°C (-13°F to 750°F) • Part No. 280_ _

4 Rev. Date 01-09-2017

Nikal - Extreme Temperature Anti-Seize• Contains nickel flake • Not for use as a thread sealant• Contains no lead, copper or graphite • Used on high strength alloys and stainless steel• May be used safely with ammonia and acetylene • Conforms to MIL-PRF-907E• -54°C to 1427°C (-65°F to 2,600°F) • Part No. 136 _ _

Nikal Nuclear - Extreme Temperature Anti-Seize• Contains chemically pure nickel • Chemical and acid resistant• Base is an ashless synthetic fluid • Certified to exceed nuclear grade purity levels• Contains a high-carbon synthetic graphite • Conforms to MIL-PRF-907E• -54°C to 1,427°C (-65°F to 2,600°F) • Part No. 135 _ _

Silver Plus - Metallic Anti-Seize • Contains aluminum and graphite • Ideal for use on aluminum and aluminum alloys• Very conductive • Utilizes a high temperature base grease• Nearly eliminates galvanic corrosion • Superior adhesive qualities• -54°C to 982°C (-65°F to 1,800°F) • Part No. 699_ _

SS-30 - High Temperature Anti-Seize• Contains pure copper • For use on stainless steel at high temperatures• Non-melting, will not run, drip or settle out • Prevents metal-to-metal contact• Will not harden or dry out in storage • Conforms to MIL-PRF-907E• -54°C to 982°C (-65°F to 1,800°F) • Part No. 125 _ _

White Knight - Food Grade Anti-Seize• Use where incidental contact with food may occur • May be used with potable water• Contains no metals • NSF H1 registered• Composed entirely of food grade ingredients • Conforms to MIL-PRF-907E• -54°C to 982°C (-65°F to 1,800°F) • Part No. 164_ _

Zinc Petrolatum - For Aluminum and its Alloys• Prevents galvanic corrosion • Water resistant• Lowers friction, reduces wrench torque • Not suitable for optical instruments• Petrolatum component evaporates • Conforms to CID-A-A-59313• -54°C to 420°C (-65°F to 788°F) • Part No. 270_ _

5Rev. Date 01-09-2017

Cleaners and Degreasers

Clean-Up - Degreaser and Safety Solvent• Non-flammable chlorinated solvent • Rapidly dissolves grease, paint, tar and grime• Does not leave a residue • Fast evaporating• Acid free • Ozone friendly• 53 kV dielectric strength • NSF K-1• Part No. 615 _ _

Clean-Up Plus - Organic Solvent Cleaner/Degreaser• Consists of a blend of safe, organic solvents • Safe on all metals and most plastics• Dries slowly to leave a residue-free surface • Biodegradable• No fluorinated or chlorinated ingredients • Ozone friendly, environmentally safe• 29 kV dielectric strength • NSF C-1• Part No. 725 _ _

Easy Clean Liquid - Alkaline Cleaner and Degreaser• Environmentally safe and ozone friendly • May be diluted with fresh or salt water• Biodegradable, non-toxic and non-flammable • Contains no acids, chlorides or phosphates• Ideal for pressure washing or steam cleaning • May be corrosive to aluminum if undiluted• 1°C to 99°C (34°F to 210°F) • Environmentally safe and ozone friendly• Part No. 300_ _

JL-5000 - Water Based Cleaner and Degreaser• Effectively removes grease, oil, organic deposits • Can be used in pressure washers• Contains no acids, alkalis, chlorides or phosphates • Environmentally safe and ozone friendly• Can be diluted with fresh or salt water • Safe on all metals and most plastics• 0°C to 100°C (32°F to 212°F) • CFIA listed, NSF registered A1, B2, C1• Part No. 710_ _

PS Terminal - Electrical Contact Cleaner• Penetrates to remove contaminants • Safe on most plastics• Evaporates to leave a residue-free surface • 35 kV dielectric strength• May be used while equipment is operating • No VOC’s• Non-flammable • NSF K2 Registered• Part No. 602_ _

6 Rev. Date 01-09-2017

Drilling and Completion Compounds#21 - Drill Pipe Compound

• Contains copper, graphite and anti-wear additives • Prevents downhole makeup• For use on rotary shouldered connections • Used on entire drill string in most applications• Ensures consistent make-up • For use where downhole conditions are severe• -18°C to 205°C (0°F to 400°F) • Aluminum stearate base• Part No. 121 _ _

API-Modified - Thread Compound• For use on tubing, casing, line pipe and flow lines • Sticks to wet, frosty or oily threads• Manufactured to API RP 5A3 specifications • Will not harden or dry out• Contains additives for corrosion protection • Not for use on rotary shouldered connections• -18°C to 205°C (0°F to 400°F) • Pressures to 69,000 kPa (10,000 psi)• Part No. 221 _ _

Easy Clean Liquid - Alkaline Cleaner and Degreaser• Environmentally safe and ozone friendly • May be diluted with fresh or salt water• Biodegradable, non-toxic and non-flammable • Contains no acids, chlorides or phosphates• Ideal for pressure washing or steam cleaning • May be corrosive to aluminum if undiluted• 1°C to 99°C (34°F to 210°F) • Environmentally safe and ozone friendly• Part No. 300_ _

Enviro-Safe - Thread Compound• Contains copper and graphite • Sticks to wet, frosty or oily threads• Use on OCTG where lead and zinc is undesirable • Will not harden or dry out• Meets API-Modified performance requirements • High film strength• -18°C to 205°C (0°F to 400°F) • Contains rust, corrosion and oxidation inhibitors• Part No. 218 _ _

Extreme - Thread Compound• For heavy duty drilling applications • Formulated to utilize API RP7G torque charts• Ideal for invert or high pH drilling muds • Superior rust and corrosion protection• Unequalled resistance to downhole makeup • Not classified as a marine pollutant• -18°C to 232°C (0°F to 450°F) • Use for high angle or horizontal holes• Part No. 114 _ _

J-75 - Drill Steel Lubricant• Specifically designed for percussion drilling • Resists shock, galling and seizing• Forms a coating to eliminates metal-to-metal contact • Environmentally safe, lead and zinc free• Resists water wash-off • Allows easy thread assembly and disassembly• -18°C to 260°C (0°F to 500°F) • Brushable formula• Part No. 248_ _

J-89 - Drill Steel Lubricant• Environmentally safe, lead and zinc free • Resists shock, galling and seizing• Extends steel and coupling life • Will not run out of hot threads• Allows for easy make-up and break-out • Resists water wash-off• -18°C to 232°C (0°F to 450°F) • Pumpable formula• Part No. 244 _ _

Jacking System Grease ECF - Non-Metallic Compound • Safe to use in offshore applications • Biodegradable, non-bioaccumulative• Outstanding galling protection • Excellent film strength• High-load resistance • Wide range of applications• -20°C to 149°C (-4°F to 300°F) • Metal free formulation• Part No. 258_ _

7Rev. Date 01-09-2017

Kopr-Kote - Drill Collar & Tool Joint Compound• Contains no lead or zinc • Superior adhesion to wet or frosty pipe• Unequalled resistance to downhole makeup • Friction factor increases as stress levels rise• For use in severe drilling conditions • Provides consistent rig floor makeup• -18°C to 205°C (0°F to 400°F) • Exceptional film strength• Part No. 101 _ _

Korr-Guard - Storage Compound• Easily flows into thread roots to displace moisture • Highly water resistant• Prevents the formation of rust and corrosion • Semi-fluid for ease of application• For long-term storage of drill pipe and tubular goods • Slightly overbased• -40°C to 149°C (-40°F to 300°F) • High soap content to hold oxidation inhibitors in place• Part No. 788 _ _

Kov’r-Kote - Tool Joint Compound• For both shouldered and interference threads • Exceeds performance specs of API RP 5A3• Metal free formulation • Prevents rust, corrosion and oxidation• Exceptionally high film strength • Same frictional characteristics as API-Modified• -18°C to 205°C (0°F to 400°F) • Formulated with high-tech polymers• Part No. 139_ _

LBX-Special - Tool Joint Compound• Contains copper, graphite and anti-wear additives • Prevents down-hole make-up• For use on rotary shouldered connections • Can be used on entire drill string in most cases• Ensures consistent make-up • For use where down-hole conditions are severe• -18°C to 205°C (0°F to 400°F) • Prevents high stress in drill pipe• Part No. 110 _ _

NCS-30 - Drill Pipe Thread Compound• Non-conductive for MWD applications • Conforms to API RP 7G torque charts• White in color • Resistant to invert or high pH drilling muds• Metal-free formulation • The ideal compound for wedge thread designs• -29°C to 260°C (-20°F to 500°F) • NSF Registered H-2• Part No. 169_ _

NCS-30 ECF - Drill String Compound• Biodegradable formulation • Non-bioaccumulative and non toxic• High oxidation and thermal stability • Superior adhesion to wet steel surfaces• Excellent on high chrome or nickel alloys • Ideal for offshore applications• -23°C to 260°C (-10°F to 500°F) • ‘Yellow’ and ‘E’ HOCNF classification• Part No. 237_ _

Pow’r-Kote - Drill Collar & Tool Joint Compound • Ideal for use on large diameter drill collars • Exceeds industry performance standards• Metal free formulation • Environmentally safe• For use in extreme conditions • Prevents excessive circumferential makeup• -18°C to 205°C (0°F to 400°F) • Exceptional film strength• Part No. 157 _ _

Run-N-Seal Extreme All-Weather - Metal Free Thread Compound• Metal free formulation • Protects against wear, galling and seizure• Environmentally safe alternative to API-Modified • Manufactured to the API RP 5A3 standard• Protects against rust, corrosion and oxidation • Exceeds performance criteria of API spec 5CT• -40°C to 232°C (-40°F to 450°F) • Sticks to wet, frosty or oily pipe• Part NO. 223 _ _

8 Rev. Date 01-09-2017

Run-N-Seal ECF - Thread Compound• Base is a blend of synthetic and vegetable oils • Gives consistent frictional performance• Biodegradable and non-bioaccumulative • An environmental alternative to API-Modified• Superior lubrication under high loads • Not for use on premium connections• -18°C to 232°C (0°F to 450°F) • Friction factor of 0.9 relative to API-Modified• Part No. 292 _ _

Seal-Guard ECF - Premium Thread Compound• Biodegradable • Superior lubrication under high loads• Designed for premium tubing/casing connections • Ideal for use on high-chrome connections• Made with a blend of synthetic and vegetable oils • Metal-free formulation• -29°C to 204°C (-20°F to 400°F) • Low solids content• Part No. 209 _ _

TF-15 - Thread Sealant• Contains PTFE particles and graphite • Seals badly worn threads• Resists vibration, surge, temperature fluctuations • 0.7 Friction Factor relative to API-Modified• Recommended compound for H

2S environments • Contains no leachable volatile organics

• -23°C to 316°C (-10°F to 600°F) • Seals pressures to 69,000 kPa (10,000 psi)• Part No. 230 _ _

Well-Guard - Monitor Well Thread Compound • Petroleum hydrocarbon free • Water and hydrocarbon resistant• Designed for environmentally sensitive areas • Non-toxic and chemically stable• Biodegradable • Contains no VOC’s• -23°C to 204°C (-10°F to 400°F) • For use in environmentally sensitive applications• Part No. 185_ _

Z-50 - Tool Joint Compound• Contains 50% pure metallic zinc • Maintains brushability over a wide temp range• Contains additives to prevent plating • Low sulphur content• Sticks to wet or frosty pipe • Resists downhole makeup• -18°C to 204°C (0°F to 400°F) • Does not build up on threads or shoulder faces• Part No. 204 _ _

9Rev. Date 01-09-2017

Eco-Certified ProductsAlco EP ECF - Extreme Service Multi-Purpose Grease

• Calcium Complex base • Biodegradable• Dropping Point of 260°C (500°F) • Extremely resistant to rust and corrosion• Color - Pale Red • Use in high moisture and sub-sea applications• -32°C to 232°C (-25°F to 450°F) • Exceeds MIL-G-18458C, Type II• Part No. 371_ _

Bullseye - Water Well Compound• Petroleum hydrocarbon free • For water well and environmental drilling• Biodegradable • Resistant to water and drilling mud• Vegetable-based fluids • Non-toxic• -7°C to 204°C (20° F to 400°F) • Not intended for monitor well drilling• Part No. 668_ _

Eco-Safe - Environmental Thread Compound• Contains no metals • Excellent on high-chrome or nickel alloys• Biodegradable • High film strength• Especially effective on invert or high pH muds • Ideal for casing drilling applications• -29°C to 260°C (-20°F to 500°F) • NSF H-2 registered• Part No. 145 _ _

EMS - Water Based Food Grade Silicone• Odorless, tasteless and non-staining • Provides a long-wearing lubricating film• Non-flammable • Will not become rancid • Stops squeaking and binding of moving parts • Excellent for use as a release agent• 1°C to 260°C (34°F to 500°F) • CFIA approved• Part No. 525 _ _

Enviro-Guard - Drop Pipe Lubricant and Sealant• Biodegradable • High solids content to ensure a seal• Metal free • Superior lubrication under high loads• Ideal for high-chrome connections • Sticks to wet or oily threads• -29°C to 260°C (-20°F to 500°F) • NLGI Grade 1• Part No. 184 _ _

Jacking System Grease ECF - Non-Metallic Compound • Safe to use in offshore applications • Biodegradable, non-bioaccumulative• Outstanding galling protection • Excellent film strength• High-load resistance • Wide range of applications• -20°C to 149°C (-4°F to 300°F) • Metal free formulation• Part No. 258_ _

JL-5000 - Water Based Cleaner and Degreaser• Effectively removes grease, oil, organic deposits • Can be used in pressure washers• Contains no acids, alkalis, chlorides or phosphates • Environmentally safe and ozone friendly• Can be diluted with fresh or salt water • Safe on all metals and most plastics• 0°C to 100°C (32°F to 212°F) • CFIA listed, NSF registered A1, B2, C1• Part No. 710 _ _

NCS-30 ECF - Drill String Compound• Biodegradable formulation • Non-bioaccumulative and non toxic• High oxidation and thermal stability • Superior adhesion to wet steel surfaces• Excellent on high chrome or nickel alloys • Ideal for offshore applications• -23°C to 260°C (-10°F to 500°F) • ‘ Yellow’ and ‘E’ HOCNF classifications• Part No. 237_ _

10 Rev. Date 01-09-2017

Run-N-Seal ECF - Thread Compound• Base is a blend of synthetic and vegetable oils • Gives consistent frictional performance• Biodegradable and non-bioaccumulative • An environmental alternative to API-Modified• Superior lubrication under high loads • Not for use on premium connections• -18°C to 232°C (0°F to 450°F) • Friction factor of 0.9 relative to API-Modified• Part No. 292 _ _

Seal-Guard ECF - Premium Thread Compound• Biodegradable • Superior lubrication under high loads• Designed for premium tubing/casing connections • Ideal for use on high-chrome connections• Made with a blend of synthetic and vegetable oils • Metal-free formulation• -29°C to 204°C (-20°F to 400°F) • Low solids content• Part No. 209 _ _

V-2 - Multi-Purpose Thread Sealant• Soft-setting, non-petroleum based formula • Allows for immediate pressurization• Contains PTFE and unique natural fillers • Will seal a wide variety of products• Environmentally safe • ULC listed for gas installations• -56°C to 260°C (-70°F to 500°F) • NSF P1 registered• Part No. 220 _ _


White Knight - Food Grade Anti-Seize• Use where incidental contact with food may occur • May be used with potable water• Contains no metals • CFIA and NSF H1 registered• Composed entirely of food grade ingredients • Conforms to MIL-PRF-907E• -54°C to 982°C (-65°F to 1,800°F) • Part No. 164 _ _

Wire Line Lubricant ECF - Environmental Lubricant• For slick line, electric line and braided line • Ideally suited to offshore applications• Biodegradable • Extremely water resistant• H

2S inhibited • Contains no VOC’s

• -29°C to 260°C (-20°F to 500°F) • Passes the biotoxicity test• Part No. 293_ _

11Rev. Date 01-09-2017

EP Greases#202 Moly-Lith - Multi-Purpose Grease

• Lithium 12-hydroxy base • Contains MoS2 for friction reduction

• Dropping Point of 200°C (390°F) • Excellent work stability• Color - Black • Ideal for chassis lubrication• -18°C to 150°C (0°F to 300°F) • Use for high loads and high speeds• Part No. 330 _ _

Alco EP - Premium Multi-Purpose Grease• Aluminum Complex base • Contains MoS

2 and graphite

• Dropping Point of 260°C (500° F) • Designed for bearings, bushings and chassis• Color - Black • Protects against extreme pressure and shock• -32°C to 232°C (-25°F to 450°F) • Excellent load-carrying ability• Part No. 370 _ _

Alco EP 73 Plus - Premium Water Resistant Grease• Aluminum Complex base • Extremely water resistant• Dropping Point of 260°C (500°F) • Excellent high temperature bearing grease• Color - Red • Use in high moisture and sub-sea applications• -32°C to 232°C (-25°F to 450°F) • MIL-PRF-18458C, Type I• Part No. 377 _ _

Alco EP ECF - Extreme Service Multi-Purpose Grease• Calcium Complex base • Biodegradable• Dropping Point of 260°C (500°F) • Extremely resistant to rust and corrosion• Color - Pale Red • Use in high moisture and sub-sea applications• -32°C to 232°C (-25°F to 450°F) • Exceeds MIL-PRF-18458C, Type II• Part No. 371_ _

AP-1 (White) - High-Temperature MP Grease• Clay base • Contains zinc oxide for added lubrication• No Dropping Point • For use where cleanliness is a factor• Color - White • Suitable for high temperature applications• -25°C to 288°C (-13°F to 550°F) • Superior storage life• Part No. 315 _ _

AP-5 - High Temperature Grease• Clay base • Contains MoS

2 for friction reduction

• No Dropping Point • High film strength• Color - Black • For heavy duty, long life protection• -25°C to 288°C (-13°F to 550°F) • Superior storage life• Part No. 250 _ _

Arctic - Low Temperature Service Grease• Anhydrous Calcium base • For use in arctic and sub-arctic conditions• Dropping Point of 140°C (285°F) • Resists humidity, ice and road salts• Color - Amber • Should not be used in highly loaded bearings• -54°C to 107°C (-65°F to 225°F) • Part No. 350 _ _

CB-2 - Super-Lith Multi-Purpose Grease• Lithium 12-Hydroxy base • Highly adhesive to metal• Dropping Point of 200°C (390°F) • Good for heavy loads• Color - Amber • Use when high quality and economy is needed• -18°C to 150°C (0°F to 300°F) • High film strength• Part No. 310 _ _

12 Rev. Date 01-09-2017

CC-Lube - Multi-Purpose Synthetic Lubricant• Semi-synthetic base • Clean, clear and odorless• Dropping Point of 260°C (500°F) • Non-toxic, non-staining• Color - Clear • NSF H-1• -18°C to 204°C (0°F to 400°F) • Conforms to SAE-AMS-G-4343• Part No. 706 _ _

EP Bearing Grease - Extreme Pressure MP Grease• Lithium 12-Hydroxy base • Suitable for most bearing applications• Dropping Point of 175°C (350°F) • Versatile and cost effective• Color - Purple • Good shear stability and lubrication properties• -18°C to 165°C • Highly adhesive to metal• Part No. 303 _ _

FMG - Food Machinery Grease• Aluminum Complex base • For use in the food preparation industry• Dropping Point of 260°C (500°F) • Extremely water resistant• Color - White • Polymer additives protect against shock loads• -18°C to 204°C (0°F to 400°F) • CFIA approved, NSF H-1 registered• Part No. 301 _ _

Kiln Grease - High Temperature Lubricant• Aluminum Complex base • For use in steel mills, pulp and paper mills, etc.• Dropping Point of 283°C (542°F) • High viscosity, highly refined base oil• Color - Green • Will not run or pound out• -18°C to 260°C (0°F to 500°F) • Excellent shear stability• Part No. 751 _ _

Marine MP - Multi-Purpose Grease• Calcium/Lithium base • Smooth, buttery texture• Dropping Point of 175°C (350°F) • Resistant to adverse marine conditions• Color - Purple • Multiple uses, lowers maintenance costs• -18°C to 163°C (0°F to 325°F) • Contains an EP performance package• Part No. 630 _ _

Marine Wire Rope & Hawser Grease - Lubricant• Protects wire rope from corrosion • Provides a non-drying film• Lubricates inner strands, drums and sheaves • Anti-corrosive• Resists humidity, heat and salt spray • Extends life and performance of wire rope• -18°C to 163°C (0°F to 325°F) • Conforms to MIL-PRF-18458C, Type I• Part No. 345_ _

Oven Chain Lube • Inorganic base • Semi-fluid consistency• No Dropping Point • Non-smoking at high temperatures• Color - White • Penetrates into the links and pins of chains• -32°C to 400°C (-25°F to 750°F) • NSF H-1 registered• Part No. 332 _ _

Silicone Compound DM - Moisture Proofing Lubricant• Inorganic base • High dielectric strength• No Dropping Point • Seals and lubricates• Color - translucent • Ideal for moisture-proofing electrical systems• -57°C to 204°C (-70°F to 400°F) • SAE-AS8660 (DM3), MIL-DTL-21567B (DM2)• Part No. 735 _ _

13Rev. Date 01-09-2017

Temp-Guard - High Temperature Synthetic Grease• Non-soap synthetic base • No petroleum based oils or additives• No Dropping Point • Low friction and extreme pressure capabilities• Color - Black • High flash point and low volatility• -22°C to 315°C (-10°F to 600°F) • Contains MoS

2 and graphite

• Part No. 318 _ _

White Lithium - Multi-Purpose Grease with PTFE• Lithium 12-Hydroxy base • Food grade formulation• Dropping Point of 200°C (390°F) • Very adhesive• Color - White • Available in aerosol form• -18°C to 190°C (0°F to 370°F) • NSF H2 registered• Part No. 503 _ _

Food Grade ProductsCC-Lube - Multi-Purpose Synthetic Lubricant

• Semi-synthetic base • Clean, clear and odorless• Dropping Point of 260°C (500°F) • Non-toxic, non-staining• Color - Clear • NSF H-1• -18°C to 204°C (0°F to 400°F) • Conforms to SAE-AMS-G-4343• Part No. 706 _ _

Clean-Up Plus - Organic Solvent Cleaner/Degreaser• Consists of a blend of safe, organic solvents • Safe on all metals and most plastics• Dries slowly to leave a residue-free surface • Biodegradable• No fluorinated or chlorinated ingredients • Ozone friendly, environmentally safe• 29 kV dielectric strength • NSF C-1• Part No. 725 _ _

EMS - Water Based Food Grade Silicone• Odorless, tasteless and non-staining • Provides a long-wearing lubricating film• Non-flammable • Will not become rancid • Stops squeaking and binding of moving parts • Excellent for use as a release agent• 1°C to 260°C (34°F to 500°F) • CFIA approved• Part No. 525 _ _

FMG - Food Machinery Grease• Aluminum Complex base • For use in the food preparation industry• Dropping Point of 260°C (500°F) • Extremely water resistant• Color - White • Polymer additives protect against shock loads• -18°C to 204°C (0°F to 400°F) • CFIA approved, NSF H-1 registered• Part No. 301 _ _

JL-5000 - Water Based Cleaner and Degreaser• Effectively removes grease, oil, organic deposits • Can be used in pressure washers• Contains no acids, alkalis, chlorides or phosphates • Environmentally safe and ozone friendly• Can be diluted with fresh or salt water • Safe on all metals and most plastics• 0°C to 100°C (32°F to 212°F) • CFIA listed, NSF registered A1, B2, C1• Part No. 710 _ _

Magic Wrench - Super Penetrant• Attacks rust and corrosion quickly • Does not evaporate• May be used as a light machine oil • Safe on all metals and most metals• Ideal for lubrication and conditioning of air tools • Silicone free, ozone safe• -51°C to 177°C (-60°F to 350°F) • CFIA approved and NSF H-1 Registered• Part No. 395 _ _

14 Rev. Date 01-09-2017

Oven Chain Lube • Inorganic base • Semi-fluid consistency• No Dropping Point • Non-smoking at high temperatures• Color - White • Penetrates into the links and pins of chains• -32°C to 400°C (-25°F to 750°F) • NSF H-1 registered• Part No. 332 _ _

PS Terminal - Electrical Contact Cleaner• Penetrates to remove contaminants • Safe on most plastics• Evaporates to leave a residue-free surface • 35 kV dielectric strength• May be used while equipment is operating • No VOC’s• Non-flammable • NSF K2 Registered• Part No. 602_ _



White Lithium - Multi-Purpose Grease with PTFE• Lithium 12-Hydroxy base • Food grade formulation• Dropping Point of 200°C (390°F) • Very adhesive• Color - White • Available in aerosol form• -18°C to 190°C (0°F to 370°F) • NSF H2 registered• Part No. 503 _ _

HDD & Waterwell ProductsJ-75 - Drill Steel Lubricant

• Specifically designed for percussion drilling • Resists shock, galling and seizing• Forms a coating to eliminates metal-to-metal contact • Environmentally safe, lead and zinc free• Resists water wash-off • Allows easy thread assembly and disassembly• -18°C to 260°C (0°F to 500°F) • Brushable formula• Part No. 248_ _

Kopr-Kote - Drill Collar & Tool Joint Compound• Contains no lead or zinc • Superior adhesion to wet or frosty pipe• Unequalled resistance to downhole makeup • Friction factor increases as stress levels rise• For use in severe drilling conditions • Provides consistent rig floor makeup• -18°C to 205°C (0°F to 400°F) • Exceptional film strength• Part No. 101 _ _


15Rev. Date 01-09-2017



Z-50 - Tool Joint Compound• Contains 50% pure metallic zinc • Maintains brushability over a wide temp range• Contains additives to prevent plating • Low sulphur content• Sticks to wet or frosty pipe • Resists downhole makeup• -18°C to 204°C (0°F to 400°F) • Does not build up on threads or shoulder faces• Part No. 204 _ _

LubricantsAX-2 - Valve Lubricant

• An economical valve body fill grease • Contains oxidation and corrosion inhibitors• Non-melting • Superior storage life• Water resistant • Highly stable, good in high and low temps• -25°C to 288°C (-13°F to 550°F) • Excellent adhesion to metal surfaces• Part No. 314 _ _

CC-Lube - Multi-Purpose Synthetic Lubricant• Semi-synthetic base • Clean, clear and odorless• Dropping Point of 260°C (500°F) • Non-toxic, non-staining• Color - Clear • NSF H-1• -18°C to 204°C (0°F to 400°F) • Conforms to SAE-AMS-G-4343• Part No. 705 _ _

Gear Guard - Paste Open Gear Lubricant• Exceptional ‘stay put’ characteristics • Bonds to steel surfaces• Reduces gear chatter • Ideal for use on fifth wheels, roller gears, etc.• Will not wash or wear off • Available in aerosol form• -32°C to 175°C (-25°F to 350°F) • Penetrates strands of wire rope• Part No. 179 _ _

Moly Mist - Dry Film Lubricant• Bonds to surfaces without heating or baking • Under sliding pressure will bond to metals• ‘Touches dry’ quickly • High chemical and thermal stability• Lowers friction, prevents galling and seizure • Inert to oil, alkalis, many acids and solvents• -185°C to 400°C (-300°F to 750°F) • Reduces torque and power consumption• Part No. 160 _ _

MP-50 - Moly Paste• Contains a high percentage of MoS

2 • Use where extreme pressure is encountered

• Non-melting and water resistant • Ideal for use as a valve stem lubricant• Plates metallic surfaces, bonds to metal • Prevents stick-slip• -25°C to 400°C (-13°F to 750°F) • Part No. 280 _ _

16 Rev. Date 01-09-2017

OG-H - Open Gear Lubricant• Made with a non-soap thickener, will not melt • Lowers operating temperatures• Very tacky, will not throw off • Increases equipment life• Reduces starting torques • Use for high pressures in slow moving equipment• -18°C to 285°C (0°F to 550°F) • Requires less lubricant versus competitive products• Part No. 260 _ _

Silicone Compound DM - Moisture Proofing Lubricant• Inorganic base • High dielectric strength• No Dropping Point • Seals and lubricates• Color - translucent • Ideal for moisture-proofing electrical systems• -57°C to 204°C (-70°F to 400°F) • NSF H1 Registered• Part No. 735 _ _

Silicone Spray - Industrial Grade Lubricant• Non-reactive to most substances • Maintains a slick, low-friction surface• Excellent lubricant for use in wet environments • Aerosol form, hydrocarbon propellant• Safe on metal, rubber, wood, plastics and vinyl • Economical lubricant for multiple applications• -18°C to 177°C (0°F to 350°F) • Quick-drying no mess formula• Part No. 507_ _

TF-500 - PTFE Lubricating Sealant• Contains a high percentage of PTFE particles • Ideal for use in the presence of harsh chemicals• Used as a supplementary seal in packing glands • Available with an organic or synthetic base• Greatly lowers friction and prevents seizure • Can be applied while equipment is running• Temperatures to 260°C (500°F) • Not for use in bearings• Part No. 143 _ _

WLD - Wire Line Dressing• Highly adhesive to wire line, cables, roller chains • Resists being thrown off the cable• Penetrates to the core, displacing moisture • Does not attract dirt and dust• Forms a thin flexible film • Contains MoS

2 and graphite

• -32°C to 175°C (-25°F to 350°F) • Highly adhesive formula• Part No. 285 _ _

WRL - Wire Rope Lubricant• Quickly penetrates to the core • Provides a non-drying, non-tacky film• Pumpable at low temperatures • Will not flake or peel• Can be used in drip or spray systems • Prevents friction and wear on inner strands• -32°C to 175°C (-25°F to 350°F) • Suited for high humidity environments• Part No. 340 _ _

17Rev. Date 01-09-2017

Marine Products

Marine Grade Anti-Seize - Non-Metallic Paste• Metal free formulation • Formulated for marine and offshore applications• High film strength • Contains MoS

2 for extreme pressures

• Resistant to water, salt spray, steam, etc. • Fills voids and imperfections on thread surfaces• -54°C to 1,316°C (-65°F to 2,400°F) • Part No. 497 _ _

Marine Moly - Lubricating Paste• Provides a protective shield on metal surfaces • Prevents galling and heat freeze• Can be applied to hot surfaces without melting • Extremely resistant to water• Withstands exposure to weather elements • 300,000 psi film strength• -185°C to 400°C (-300°F to 750°F) • Available in aerosol form• Part No. 650 _ _

Marine MP - Multi-Purpose Grease• Calcium/Lithium base • Smooth, buttery texture• Dropping Point of 175°C (350°F) • Resistant to adverse marine conditions• Color - Purple • Multiple uses, lowers maintenance costs• -18°C to 163°C (0°F to 325°F) • Contains an EP performance package• Part No. 630 _ _

Marine Wire Rope & Hawser Grease - Lubricant• Protects wire rope from corrosion • Provides a non-drying film• Lubricates inner strands, drums and sheaves • Anti-corrosive• Resists humidity, heat and salt spray • Extends life and performance of wire rope• -18°C to 163°C (0°F to 325°F) • Conforms to MIL-PRF-18458 C (SH)• Part No. 345_ _

Penetrants and Coatings

12/34 - Lubricant and Penetrant• Powerful industrial grade penetrant • Prevents rust and corrosion• Non-conductive • Contains ashless extreme pressure additives• Superior ‘creepability’ • Lifts and displaces moisture• -75°C to 150°C (100°F to 300°F) • MIL-PRF-81309F• Part No. 373 _ _

769 - Lubricant and Penetrant• Light machine oil base • Contains no fluorocarbons or silicones• Non-evaporating • Non-flammable CO

2 propellant

• Lifts and displaces moisture • NSF Registered H-2• -32°C to 150°C (-25°F to 300°F) • Conforms to MIL-PRF-81309F• Part No. 769 _ _


18 Rev. Date 01-09-2017

Magic Wrench - Super Penetrant• Attacks rust and corrosion quickly • Does not evaporate• May be used as a light machine oil • Safe on all metals and most metals• Ideal for lubrication and conditioning of air tools • Silicone free, ozone safe• -51°C to 177°C (-60°F to 350°F) • CFIA approved and NSF H-1 Registered• Part No. 395 _ _

Rubber Lubricant/Mold Release• Water based silicone product • Dries to a thin protective film• Contains twice the silicone of aerosol products • Absorbs into natural or synthetic rubber• Non-toxic, environmentally safe • Non-flammable• 0°C to 260°C (32°F to 500°F) • Excellent for all metal, plastic or rubber castings• Part No. 520 _ _

Rust-Guard - Corrosion Inhibitor• Displaces moisture • Penetrates into small crevices• Dries to a thin, waxy film • Easily removed with solvent s or detergents• For short-term storage of metallic equipment • Green in color to facilitate visual coverage check• -30°C to 138°C (-20°F to 280°F) • Conforms to MIL-PRF-16173E Grades 1 & 2• Part No. 132 _ _

Z-Plate - Zinc Rich Galvanize• Prevents galvanic corrosion • Repairs damaged galvanized surfaces• Forms a tough, durable zinc coating • Bonds electrochemically with base metal• Can be used as a primer for surfaces to be painted • Dry film, long term coating• -185°C to 400°C (-300°F to 750°F) • MIL-PRF-26915D• Part No. 605_ _

Storage Products

769 - Lubricant and Penetrant• Light machine oil base • Contains no fluorocarbons or silicones• Non-evaporating • Non-flammable CO

2 propellant

• Lifts and displaces moisture • NSF Registered H-2• -32°C to 150°C (-25°F to 300°F) • Conforms to MIL-PRF-81309F• Part No. 769 _ _


Rust-Guard - Corrosion Inhibitor• Displaces moisture • Penetrates into small crevices• Dries to a thin, waxy film • Easily removed with solvent s or detergents• For short-term storage of metallic equipment • Green in color to facilitate visual coverage check• -30°C to 138°C (-20°F to 280°F) • Conforms to MIL-PRF-16173E Grades 1 & 2• Part No. 132 _ _

19Rev. Date 01-09-2017

Thread Sealants

Petro-Tape - PTFE Thread Seal Tape• Made of pure, virgin PTFE • ULC Listed• Inert to chemicals, solvents, fuels, most acids, etc. • Will never dry out• Available in ¼”, ½”, ¾” and 1” widths • Cannot drip or run• -240°C to 260°C (-400°F to 500°F) • Conforms to CID A-A-58092• Part No. 307_ _

TF-15 - Thread Sealant• Contains PTFE particles and graphite • Seals badly worn threads• Resists vibration, surge, temperature fluctuations • 0.7 Friction Factor relative to API-Modified• Recommended compound for H

2S environments • Contains no leachable volatile organics

• -23°C to 316°C (-10°F to 600°F) • Seals pressures to 69,000 kPa (10,000 psi)• Part No. 230 _ _

TFW - Multi-Purpose Sealant• Contains PTFE particles for sealing threaded joints • No solvent structure that will harm ABS pipe• Allows for tight make-up with low torque • Non-hardening, will not settle out• Safe for use on potable water lines • Conforms to the Uniform Plumbing Code (IAPMO)• -18°C to 260°C (0°F to 500°F • Ideal for use on fire sprinkler systems• Part No. 240 _ _


Valve Products

AX-2 - Valve Lubricant• An economical valve body fill grease • Contains oxidation and corrosion inhibitors• Non-melting • Superior storage life• Water resistant • Highly stable, good in high and low temps• -25°C to 288°C (-13°F to 550°F) • Excellent adhesion to metal surfaces• Part No. 314_ _

Ezy-Open - Valve Penetrant• Vegetable oil / ester base • Non-flammable• Environmentally safe • Reduces breaking torque• Contains no SARA listed ingredients • Contains dispersants and detergents• -23°C to 204°C (-10°F to 400°F) • Contains PTFE• Part No. 990 _ _

Ezy-Pak #100 - Packing Compound• Synthetic base • Injectable using a high pressure lubricator• Contains PTFE particles • Chemically resistant• Color - white • Available in J-Sticks• -18°C to 288°C (0°F to 550°F) • Widely used as a packing material• Part No. 970_ _

20 Rev. Date 01-09-2017

Ezy-Pak #115 - Packing Compound• Synthetic base • For use with gasoline, propane, crude oil, etc.• Designed for use in WKM type stem glands • Most common packing used• Color - green • Available in J-Sticks and K-Sticks• -62°C to 288°C (-80°F to 550°F) • Reduces torque requirements• Part No. 985 _ _

Ezy-Pak #120 - Packing Compound• Vegetable oil base • Will not harden in storage• For hydrocarbon and aqueous service • Economical to use• Color - grey/black • Available in J-Sticks• -18°C to 260°C (0°F to 500°F) • Conforms to the shape of any void for sealing• Part No. 975_ _

Ezy-Pak #125 - Packing Compound• Synthetic base • For use with liquid and gaseous hydrocarbons• For use in severe arctic conditions • Excellent water resistance• Color - light blue • Available in J-Sticks and K-Sticks• -60°C to 288°C (-75°F to 550°F) • Good for steam service to 121°C (250°F)• Part No. 980 _ _

Ezy-Turn #2 - Gate Valve Sealant• Vegetable oil base • Use when hydrocarbon resistance is important• Contains no solid fillers • Extremely resistant to water• Color - Clear / Amber • Available in B-Sticks, J-Sticks and bulk• -29°C to 260°C (-20°F to 500°F) • Widely used in Vetco Gray and similar valves• Part No. 905 _ _

Ezy-Turn #3 - Plug Valve Sealant• Vegetable oil base • Use with light hydrocarbon liquids and gases• Contains MoS

2 • Ideal for pipeline and compressor station use

• Color - Gray / Black • Available in B-Sticks and J-Sticks• -18°C to 260°C (0°F to 500°F • Used mainly for gases• Part No. 930 _ _

Ezy-Turn #3 Arctic - Gate and Plug Valve Sealant• Made with a blend of vegetable and synthetic oils • Resistant to H

2S

• Contains MoS2 to lower torque requirements • For use with LPG and natural gas

• Designed for use in arctic conditions • Available in bulk form• -40°C to 260°C (-40°F to 500°F) • Allows for valve activation at low temperatures• Part No. 931 _ _

Ezy-Turn #4 - Gate Valve Sealant• Formulated from food grade polyester base fluids • Excellent resistance to aqueous solutions• Resistant to aliphatic hydrocarbons • Not recommended for steam or high alkalinity• Color - Gray / Black • Available in B-Sticks, J-Sticks and bulk• -40°C to 260°C (-40°F to 500°F) • For use in both low and high temperatures• Part No. 920_ _

Ezy-Turn #5 - Plug Valve Sealant• Vegetable oil base • Non-toxic and biodegradable• Use for maximum sealing power • Contains no solid lubricants• Color - Amber • Available in B-Sticks, J-Sticks, K-Sticks and bulk• -18°C to 204°C (0°F to 400°F) • Ideal for use on hydrocarbon liquids• Part No. 935 _ _

21Rev. Date 01-09-2017

Ezy-Turn #6 - Plug Valve Sealant• Formulated with food grade synthetic fluids • Holds better under pressure at high temps• Retains its consistency at high temperatures • Prevents scoring and galling on precision surfaces• Color - Green • Available in bulk form• -35°C to 260°C (-30°F to 500°F) • Effective with both liquids and gases• Part No. 940 _ _

Ezy-Turn #8 - Plug Valve Sealant• Vegetable oil base • Excellent on worn or scored valves• Contains a high percentage of PTFE particles • Water and hydrocarbon resistant• Color - Blue-Green • Available in J-Sticks, K-Sticks and bulk• -18°C to 230°C (0°F to 450°F) • Can use as a stem packing or thread sealant• Part No. 945 _ _

Ezy-Turn #12 - Gate Valve Sealant• Vegetable oil / polymer base • Hydrocarbon resistant• Standard ‘peanut butter’ sealant • For use with WKM and similar type valves• Color - Brown • Available in bulk form• -18°C to 93°C (0°F to 200°F) • Economical• Part No. 955 _ _

Ezy-Turn #22 - Gate Valve Sealant• Synthetic and vegetable base • Ideal for use in gaseous service• Contains no solid fillers • For use in a variety of service applications• Hydrocarbon and water resistant • Available in bulk form• -46°C to 149°C (-50°F to 300°F) • Biodegradable• Part No. 965 _ _

Ezy-Turn Body Fill - Gate Valve Sealant• Mineral Oil base • Not suitable for hydrocarbon resistance• Has good metal adhesion • Displaces moisture• For use where economy is a factor • Available in bulk form• -23°C to 177°C (-10°F to 350°F) • Good for close tolerance valves• Part No. 925_ _

Ezy-Turn H2S - Gate Valve Sealant

• Synthetic and vegetable oil base • Resistant to H2S and hydrocarbon fluids

• Extremely tacky • Use for aliphatic hydrocarbons, i.e. diesel fuel• Corrosion resistant • Available in bulk form• -18°C to 177°C (0°F to 350°F) • Clean up with Jet-Lube Ezy-Open• Part No. 910 _ _

Ezy-Turn Polar - Gate Valve Sealant• Synthetic oil base • For use in arctic conditions• Prevents galling of valve gates and seats • Resistant to H

2S and CO

2

• Will not absorb or mix with water • Available in bulk form• -59°C to 121°C (-75°F to 250°F) • Normal valve operation requires less torque• Part No. 915 _ _

SAGD Valve Seal - High Temperature Service Sealant• For use in steam and geothermal service • Gives consistent frictional performance• Base fluid is resistant to CO

2, H

2S, chemicals, etc. • Non-toxic, non-hazardous

• Provides excellent lubrication under high pressure • Provides oxidation resistance• -32°C to 400°C (-28°F to 750°F) • Can be used in a wide variety of valve types• Part No. 1761 _ _

22 Rev. Date 01-09-2017

Specialty Products

Dope Brushes• Beveled - Part No. 03500• Tapered - Part No. 03000• Tapered - 30” Handle - Part No. 02500

Water Well Products - Design Water

Chlor-Oust - Chlorine Neutralizer • Neutralizes or dechlorinates Sterilene • Dissolves very fast• Neutralizes 100 ppm chlorine (Sterilene) • Within 4 minutes of recirculation• Part No. DWT406

Mud-Buster - Clay Remover• Removes clays from an unconsolidated formations • Enhances well yields in new and old wells.• Part No. DWT41_

pH Neutralize - Neutralizes Any Acidic Liquid• Extremely concentrated, slightly alkaline liquid • Naturally occurring mineral• Readily usable by plant and animal life upon disposal • Mixes more easily than any of the present powders• Part No. DWT42_

Sterilene - The New Chlorine• NSF 60 Certified • 55% available chlorine• Granular but easy to mix, even in cold water • No premixing to control pH• No corrosive fumes so no corrosion in trucks • No shelf life limitations, lasts forever• Part No. DWT20_

Unicid Catalyst - Mineral Scale Remover• Liquid organic, slightly acidic formulation with polymer dispersants • Effectively dissolves blockages• Suspends the debris • Protects metal surfaces from corrosion• Part No. DWT30_

Unicid Granular - Mineral Scale Remover • Granular acid formulation of organic acids • Enhanced by chelates, dispersants, and inhibitors• Noncorrosive, safe for disposal • Unique dissolving capabilities• Part No. DWT31_

Unicid Bullets - Mineral Scale Remover• Granular acid formulation of organic acids • Enhanced by chelates, dispersants, and inhibitors• Liquid encapsulation process • Unique dissolving capabilities• Part No. DWT32_

Wirehog - Well Casing & Pipe Cleaning Brushes • Available with steel or poly bristles • Use poly brushes for PVC casing and screen• 3” Steel - Part No. DWT109 • 3” Poly - Part No. DWT153• 4” Steel - Part No. DWT112 • 4” Poly - Part No. DWT156• 5” Steel - Part No. DWT115 • 5” Poly - Part No. DWT165• 6” Steel - Part No. DWT118 • 6” Poly - Part No. DWT168• 8” Steel - Part No. DWT121 • 8” Poly - Part No. DWT171

23Rev. Date 01-09-2017

SM

Jet-Lube of Canada Ltd. was established in Edmonton, Alberta in 1954 to take advan-

tage of the oil boom ushered in by Leduc oil discovery and to serve the surge of the

new Oil Patch. The first products manufactured were primarily thread compounds

designed for the drilling and production industries. By focusing on product quality

and reliability, Jet-Lube soon became a dominant force in the niche industry of oilfield

thread compounds.

In the mid 1970’s the product line was diversified to include MRO (Maintenance, Re-

pair, Overhaul) products such as anti-seize compounds, thread sealants, greases and

lubricants, cleaners and degreasers, etc. – products that virtually every industry uses

in some part of their operations. The same care and attention to quality has quickly

brought us to the fore as a world leader in the manufacture of thread compounds and

specialty lubricants. New products are constantly being developed to address new

technology and environmental concerns.

Since the late 1980s, Jet-Lube has led the way in the development of environmentally-

acceptable lubricants, sealants and related specialty products. After years of reformu-

lation and testing, Jet-Lube now offers industries around the world a complete line

of environmentally acceptable products that exceed industry standards and meet

Jet-Lube’s own high-performance criteria. Qualifying products bear our “Eco-Certified”

thumbprint.

Over the past decade warehouse facilities have been added across Canada to better

serve our customers from coast to coast. While Jet-Lube of Canada Ltd. continues to

be inspired by the potential for further growth, the prime commitment will always be

to customer satisfaction.

We are always happy for the opportunity to talk to our customers and potential cus-

tomers about our products and about specific applications. If we don’t have a product

on the shelf that will help, ask us about developing or modifying a product specifically

for your application. Solving problems is what helps us grow!

CONTACT US

Head Office3820-97 Street NWEdmonton, Alberta T6E 5S8

Toll Free Ph: 1-888-771-7775Local Phone: (780) 463-7441

Toll Free Fax: 1-888-449-4449Fax: (780) 463-7454

[email protected]

Copyright©2012 - 2017. All images, photographs, logos and content are the property of Jet-Lube Inc. and Jet-Lube of Canada Ltd. These files are provided for information only and cannot be altered, disseminated or used in any way except by express permission of Jet-Lube of Canada Ltd.

TECHNICAL APPLICATIONS - Jet-Lube Canadajetlubecanada.com/brochures/Technical_Applications.pdf ·...

Documents

Transcript of TECHNICAL APPLICATIONS - Jet-Lube Canadajetlubecanada.com/brochures/Technical_Applications.pdf ·...