TECH VARI TECH is an acronym for VARIOUS …VARI-TECH’s engineering and VARI-TECH is an acronym...
Transcript of TECH VARI TECH is an acronym for VARIOUS …VARI-TECH’s engineering and VARI-TECH is an acronym...
1/8”
VARI-TECH LLCProtecting the Environment
HDPE PIPE & FITTINGSHDPE MANHOLES • PUMP STATIONS
STORMWATER STORAGE & REUSEDISTRICT HEATING AND COOLING
FIBERGLASS SYSTEMSSTRUCTURAL - GRATING - DUCT
AQUATHERM PP-RFUSIOLEN COMPOSITE PIPING
SPIROLITE LARGE DIAMETER THERMOPLASTIC
SYNTHETEXFABRIC FORMED CONCRETE
VARI-TECH Sales Engineers have extensive backgrounds and formal education in Civil, Mechanical, and Environmental Engineering fields. Field training of all VARI-TECH personnel is essential to providing high quality projects to our clients.
FULL LINE OF FUSION EQUIPMENT
SALE & RENTAL
Corporate Headquarters
Phone: (315)622-1800
Fax: (315)622-1811
www.varitech.com
Texas
(888)622-1881
Our technical field engineers average over 17 yearsexperience! Installation start-upis standard on every project. Wecan provide CAD drawings andsubmittal packages to complete the design.
VARI-TECH’S Fabrication and On-Site Installation experts are able to fabricate using thermoplastic and various alloys, as well as fiberglass reinforced plastics (FRP). Over the past 30 years, VARI-TECH has provided complete customer service, from assistance with simple pipe lay-outs to more sophisticated turn-key, skid mounted chemical and fluid handling systems.
VARI-TECH is a Certified McElroy Rental Affiliate with a degreed mechanic on staff. With a complete range of fusion equipment including PitBulls, TracStars and the original wheeled units, VARI-TECH has a thermal plastic pipe fusion machine for every HDPE and Aquatherm PP-R application.
We offer a course on the fusion process with McElroy machines. Students train in a classroom setting, as well as hands-on with a McElroy machine- guided by one of our fusion experts. Certification is granted upon successful completion of training.
Mid-Atlantic
(856)332-3918
New England
(978)887-0272
Doing More With VARI-TECH
Working with VARI-TECH means just that. When you choose VARI-TECH as your preferred product supplier, we work with you throughout the life of your project. Our scope of capabilities extends well beyond the typical waterworks distributor.
then, the scope of our business has spread across North America as we continue to expand. A partnership with Emco Corporation in
design, technicians, andfusion equipment at the Gowanus Canal Superfund Site in Brooklyn, NY—as featured by TIME Magazine. Watch the video and learn about more of our projects at www.VARITECH.com
Gowanus CanalVARI-TECH’s engineering and
WWW.VARITECH.COM
VARI-TECH is an acronym for VARIOUS TECHNOLOGIESVARI-TECH was established in 1989, initially selling engineered products and services to the northeastern United States. Since then, the scope of our business has spread across North America as we continue to expand. A partnership with Emco Corporation in 2004 has allowed growth into the export business.
VARI-TECH works with Facility and Consultant Engineers in order to ensure product suitability throughout construction details. Our technical personnel will partner with your design team to develop innovative, cost-effective, and imaginative solutions for all applications. VARI-TECH specializes in custom design and fabrications, by navigating environmental and situational application challenges, in order to best serve our customers from project conception to completion.
1/8”
VARI-TECH LLCProtecting the Environment
HDPE PIPE & FITTINGSHDPE MANHOLES • PUMP STATIONS
STORMWATER STORAGE & REUSEDISTRICT HEATING AND COOLING
FIBERGLASS SYSTEMSSTRUCTURAL - GRATING - DUCT
AQUATHERM PP-RFUSIOLEN COMPOSITE PIPING
SPIROLITE LARGE DIAMETER THERMOPLASTIC
SYNTHETEXFABRIC FORMED CONCRETE
VARI-TECH Sales Engineers have extensive backgrounds and formal education in Civil, Mechanical, and Environmental Engineering fields. Field training of all VARI-TECH personnel is essential to providing high quality projects to our clients.
FULL LINE OF FUSION EQUIPMENT
SALE & RENTAL
Corporate Headquarters
Phone: (315)622-1800
Fax: (315)622-1811
www.varitech.com
Texas
(888)622-1881
Our technical field engineers average over 17 yearsexperience! Installation start-upis standard on every project. Wecan provide CAD drawings andsubmittal packages to complete the design.
VARI-TECH’S Fabrication and On-Site Installation experts are able to fabricate using thermoplastic and various alloys, as well as fiberglass reinforced plastics (FRP). Over the past 30 years, VARI-TECH has provided complete customer service, from assistance with simple pipe lay-outs to more sophisticated turn-key, skid mounted chemical and fluid handling systems.
VARI-TECH is a Certified McElroy Rental Affiliate with a degreed mechanic on staff. With a complete range of fusion equipment including PitBulls, TracStars and the original wheeled units, VARI-TECH has a thermal plastic pipe fusion machine for every HDPE and Aquatherm PP-R application.
We offer a course on the fusion process with McElroy machines. Students train in a classroom setting, as well as hands-on with a McElroy machine- guided by one of our fusion experts. Certification is granted upon successful completion of training.
Mid-Atlantic
(856)332-3918
New England
(978)887-0272
Doing More With VARI-TECH
Working with VARI-TECH means just that. When you choose VARI-TECH as your preferred product supplier, we work with you throughout the life of your project. Our scope of capabilities extends well beyond the typical waterworks distributor.
then, the scope of our business has spread across North America as we continue to expand. A partnership with Emco Corporation in
design, technicians, andfusion equipment at the Gowanus Canal Superfund Site in Brooklyn, NY—as featured by TIME Magazine. Watch the video and learn about more of our projects at www.VARITECH.com
Gowanus CanalVARI-TECH’s engineering and
WWW.VARITECH.COM
VARI-TECH is an acronym for VARIOUS TECHNOLOGIESVARI-TECH was established in 1989, initially selling engineered products and services to the northeastern United States. Since then, the scope of our business has spread across North America as we continue to expand. A partnership with Emco Corporation in 2004 has allowed growth into the export business.
VARI-TECH works with Facility and Consultant Engineers in order to ensure product suitability throughout construction details. Our technical personnel will partner with your design team to develop innovative, cost-effective, and imaginative solutions for all applications. VARI-TECH specializes in custom design and fabrications, by navigating environmental and situational application challenges, in order to best serve our customers from project conception to completion.
HDPE PIPE & FITTINGSHDPE MANHOLES PUMP STATIONS
AQUATHERM PP-R FUSIOLEN COMPOSITE PIPING
AWWA C901
AWWA C906
Industrial Piping
Factory Mutual Approved
High Temperature Industrial
Landfill Piping Systems
Dual Containment Systems
Gas Piping Systems
Molded Fittings
Fabricated Fittings
Electrofusion Fittings
Hot Tapping
Heat Fusion Joints
Polyethylene Manholes
Odor Control Piping
Service Tees and Saddles
Chilled Water
Mechanical Joints
POLY-CAM Transitions
Hot & Cold Potable Water
Food-grade Applications
Hydronic Systems
Geothermal Systems
Industrial, Chemical Systems
Non-leaching
Solvent Free Assembly
Blue Pipe from .5” to 24”
Green Pipe from .5” to 18”
Heat Fusion Joints
Patented Faser Layerreduces linear expansion by75%
SPIROLITE LARGE-DIAMETER HDPE DIRECT BURY OR PIPE RELINING
PLATINUM PIPE (PE-RT)HIGH TEMPERATURE HDPE PIPE SYSTEMS DISTRICT HEATING AND COOLING (DH&C)
Platinum Pipe (PE-RT) is made from a high performance 4710 resin made by the Dow Corporation. This pressure pipe is ideal for applications with temperatures up to a continuous 180 degrees F. Hot water and condensate return pipe applications are perfect for this high performing resin. The pipe joints are fully restrained and as strong as the pipe itself. The ability of PE-RT pipe to absorb a large degree of axial and hoop strain allows for above and below ground applications. This pipe is a seamless companion to the typical 4710 resin series that is used in chilled water applications.
Spirolite® pipe, because of the unique process through which it is manufactured, is the only high density polyethylene system in the United States that truly offers a cost competitive alternative to traditional piping materials for gravity sanitary sewer and industrial waste applications. NYS DOT Culvert Relining Approved. PLASSON USA manufactures complete prefabricated Spirolite Odor Control Systems and Bio-Filter Systems.
• Continuous hot water applications up to 180 F
• PE-RT pipe can withstand intermittent operatingTemperatures to 95°C (203°F)
• Low forces generated when expanding or contracting.Approximately 5% the force of steel pipe!
• Fusion per ASTM F 2620 (same as standard 4710 resin)
• Broad pH chemical resistance range from 1-14.
Meets ASTM F-894
Bell x Spigot joint design
Made from pressure rated,pipe grade 4710 HDPE resin
18” to 120” I.D.
High tensile strength
High corrosion resistance
Tight joints/Impervious wall
Low flow friction loss
Longer Lengths/FewerJoints
Adaptable to Fittings &Manholes
Ability to CustomFabricate
SYNTHETEX FABRIC FORMED CONCRETE
FIBERGLASS STRUCTURAL • GRATING • HVAC
Hydrotex fabric forms have been used in millions of square feet of installations worldwide. This product consistently outperforms traditional concrete slope paving and rip-rap. Hydrotex Fabric Forms are filled in place with concrete, delivering the durability and performance of concretewithout the costly and difficult installation process of conventionally-formed concrete slope paving. Hydrotex systems are not only less expensive than rip rap, gabions, precast concrete blocks, or conventionally-formed concrete slope paving, but they also deliver significant stability and performance advantages once installed.
Lightweight forms are easily shipped
Hand tools, a generator, and a concrete pump are generallythe only equipment required
Concrete can be pumped in from 250 meters (800 ft.) away A minimal crew is required, simplifying mobilization
Corrosion Resistant
Simple Fabrication
Strong & Lightweight
Low Thermal Conductivity
Impact Resistant
Low Electrical Conductivity
Various fabric configurations available for every application
Polyethylene piping systems provide dependable quality and proven reliability that industry professionals rely on. Aside from being a leak free solution for all types of applications, polyethylene pipe is chemically inert, light weight, and corrosion and abrasion resistant. Under stress, polyethylene pipe’s flexibility will allow it to deflect rather than crack, making it a standard for critical applications.
Aquatherm is made from engineered PP-R resin. PP-R resin has very high pressure capabilitiies, up to 415 PSI, and can be used in up to 200° F temperatures. PP-R has significantly lower expansion and contraction rates than traditional thermoplastic systems, and expands at a similar rate as copper pipe. PP-R replaces more costly copper, stainless steel, and other welded metal pipe systems. Aquatherm PP-R is backed by a 10-year, unlimited, multi-million dollar warranty!
Available items include: Handrail, Molded and Pultruded Grating, Structural Members, Platforms, Insulated Panels, Ladders, Custom Pultrusions, Plate, Buildings & Shelters, Bridges, Anti-Skid Surfaces, Tanks, Ductwork, Dampers, Fans, Manholes, Baffle Walls, Custom Fabrications, Odor Control Covers, Attachment Hardware, Under Slab Duct, and Custom Industrial & Commercial Applications.
HDPE PIPE & FITTINGSHDPE MANHOLES PUMP STATIONS
AQUATHERM PP-R FUSIOLEN COMPOSITE PIPING
AWWA C901
AWWA C906
Industrial Piping
Factory Mutual Approved
High Temperature Industrial
Landfill Piping Systems
Dual Containment Systems
Gas Piping Systems
Molded Fittings
Fabricated Fittings
Electrofusion Fittings
Hot Tapping
Heat Fusion Joints
Polyethylene Manholes
Odor Control Piping
Service Tees and Saddles
Chilled Water
Mechanical Joints
POLY-CAM Transitions
Hot & Cold Potable Water
Food-grade Applications
Hydronic Systems
Geothermal Systems
Industrial, Chemical Systems
Non-leaching
Solvent Free Assembly
Blue Pipe from .5” to 24”
Green Pipe from .5” to 18”
Heat Fusion Joints
Patented Faser Layerreduces linear expansion by75%
SPIROLITE LARGE-DIAMETER HDPE DIRECT BURY OR PIPE RELINING
PLATINUM PIPE (PE-RT)HIGH TEMPERATURE HDPE PIPE SYSTEMS DISTRICT HEATING AND COOLING (DH&C)
Platinum Pipe (PE-RT) is made from a high performance 4710 resin made by the Dow Corporation. This pressure pipe is ideal for applications with temperatures up to a continuous 180 degrees F. Hot water and condensate return pipe applications are perfect for this high performing resin. The pipe joints are fully restrained and as strong as the pipe itself. The ability of PE-RT pipe to absorb a large degree of axial and hoop strain allows for above and below ground applications. This pipe is a seamless companion to the typical 4710 resin series that is used in chilled water applications.
Spirolite® pipe, because of the unique process through which it is manufactured, is the only high density polyethylene system in the United States that truly offers a cost competitive alternative to traditional piping materials for gravity sanitary sewer and industrial waste applications. NYS DOT Culvert Relining Approved. PLASSON USA manufactures complete prefabricated Spirolite Odor Control Systems and Bio-Filter Systems.
• Continuous hot water applications up to 180 F
• PE-RT pipe can withstand intermittent operatingTemperatures to 95°C (203°F)
• Low forces generated when expanding or contracting.Approximately 5% the force of steel pipe!
• Fusion per ASTM F 2620 (same as standard 4710 resin)
• Broad pH chemical resistance range from 1-14.
Meets ASTM F-894
Bell x Spigot joint design
Made from pressure rated,pipe grade 4710 HDPE resin
18” to 120” I.D.
High tensile strength
High corrosion resistance
Tight joints/Impervious wall
Low flow friction loss
Longer Lengths/FewerJoints
Adaptable to Fittings &Manholes
Ability to CustomFabricate
SYNTHETEX FABRIC FORMED CONCRETE
FIBERGLASS STRUCTURAL • GRATING • HVAC
Hydrotex fabric forms have been used in millions of square feet of installations worldwide. This product consistently outperforms traditional concrete slope paving and rip-rap. Hydrotex Fabric Forms are filled in place with concrete, delivering the durability and performance of concretewithout the costly and difficult installation process of conventionally-formed concrete slope paving. Hydrotex systems are not only less expensive than rip rap, gabions, precast concrete blocks, or conventionally-formed concrete slope paving, but they also deliver significant stability and performance advantages once installed.
Lightweight forms are easily shipped
Hand tools, a generator, and a concrete pump are generallythe only equipment required
Concrete can be pumped in from 250 meters (800 ft.) away A minimal crew is required, simplifying mobilization
Corrosion Resistant
Simple Fabrication
Strong & Lightweight
Low Thermal Conductivity
Impact Resistant
Low Electrical Conductivity
Various fabric configurations available for every application
Polyethylene piping systems provide dependable quality and proven reliability that industry professionals rely on. Aside from being a leak free solution for all types of applications, polyethylene pipe is chemically inert, light weight, and corrosion and abrasion resistant. Under stress, polyethylene pipe’s flexibility will allow it to deflect rather than crack, making it a standard for critical applications.
Aquatherm is made from engineered PP-R resin. PP-R resin has very high pressure capabilitiies, up to 415 PSI, and can be used in up to 200° F temperatures. PP-R has significantly lower expansion and contraction rates than traditional thermoplastic systems, and expands at a similar rate as copper pipe. PP-R replaces more costly copper, stainless steel, and other welded metal pipe systems. Aquatherm PP-R is backed by a 10-year, unlimited, multi-million dollar warranty!
Available items include: Handrail, Molded and Pultruded Grating, Structural Members, Platforms, Insulated Panels, Ladders, Custom Pultrusions, Plate, Buildings & Shelters, Bridges, Anti-Skid Surfaces, Tanks, Ductwork, Dampers, Fans, Manholes, Baffle Walls, Custom Fabrications, Odor Control Covers, Attachment Hardware, Under Slab Duct, and Custom Industrial & Commercial Applications.
HDPE PIPE & FITTINGSHDPE MANHOLES PUMP STATIONS
AQUATHERM PP-R FUSIOLEN COMPOSITE PIPING
AWWA C901
AWWA C906
Industrial Piping
Factory Mutual Approved
High Temperature Industrial
Landfill Piping Systems
Dual Containment Systems
Gas Piping Systems
Molded Fittings
Fabricated Fittings
Electrofusion Fittings
Hot Tapping
Heat Fusion Joints
Polyethylene Manholes
Odor Control Piping
Service Tees and Saddles
Chilled Water
Mechanical Joints
POLY-CAM Transitions
Hot & Cold Potable Water
Food-grade Applications
Hydronic Systems
Geothermal Systems
Industrial, Chemical Systems
Non-leaching
Solvent Free Assembly
Blue Pipe from .5” to 24”
Green Pipe from .5” to 18”
Heat Fusion Joints
Patented Faser Layerreduces linear expansion by75%
SPIROLITE LARGE-DIAMETER HDPE DIRECT BURY OR PIPE RELINING
PLATINUM PIPE (PE-RT)HIGH TEMPERATURE HDPE PIPE SYSTEMS DISTRICT HEATING AND COOLING (DH&C)
Platinum Pipe (PE-RT) is made from a high performance 4710 resin made by the Dow Corporation. This pressure pipe is ideal for applications with temperatures up to a continuous 180 degrees F. Hot water and condensate return pipe applications are perfect for this high performing resin. The pipe joints are fully restrained and as strong as the pipe itself. The ability of PE-RT pipe to absorb a large degree of axial and hoop strain allows for above and below ground applications. This pipe is a seamless companion to the typical 4710 resin series that is used in chilled water applications.
Spirolite® pipe, because of the unique process through which it is manufactured, is the only high density polyethylene system in the United States that truly offers a cost competitive alternative to traditional piping materials for gravity sanitary sewer and industrial waste applications. NYS DOT Culvert Relining Approved. PLASSON USA manufactures complete prefabricated Spirolite Odor Control Systems and Bio-Filter Systems.
• Continuous hot water applications up to 180 F
• PE-RT pipe can withstand intermittent operatingTemperatures to 95°C (203°F)
• Low forces generated when expanding or contracting.Approximately 5% the force of steel pipe!
• Fusion per ASTM F 2620 (same as standard 4710 resin)
• Broad pH chemical resistance range from 1-14.
Meets ASTM F-894
Bell x Spigot joint design
Made from pressure rated,pipe grade 4710 HDPE resin
18” to 120” I.D.
High tensile strength
High corrosion resistance
Tight joints/Impervious wall
Low flow friction loss
Longer Lengths/FewerJoints
Adaptable to Fittings &Manholes
Ability to CustomFabricate
SYNTHETEX FABRIC FORMED CONCRETE
FIBERGLASS STRUCTURAL • GRATING • HVAC
Hydrotex fabric forms have been used in millions of square feet of installations worldwide. This product consistently outperforms traditional concrete slope paving and rip-rap. Hydrotex Fabric Forms are filled in place with concrete, delivering the durability and performance of concretewithout the costly and difficult installation process of conventionally-formed concrete slope paving. Hydrotex systems are not only less expensive than rip rap, gabions, precast concrete blocks, or conventionally-formed concrete slope paving, but they also deliver significant stability and performance advantages once installed.
Lightweight forms are easily shipped
Hand tools, a generator, and a concrete pump are generallythe only equipment required
Concrete can be pumped in from 250 meters (800 ft.) away A minimal crew is required, simplifying mobilization
Corrosion Resistant
Simple Fabrication
Strong & Lightweight
Low Thermal Conductivity
Impact Resistant
Low Electrical Conductivity
Various fabric configurations available for every application
Polyethylene piping systems provide dependable quality and proven reliability that industry professionals rely on. Aside from being a leak free solution for all types of applications, polyethylene pipe is chemically inert, light weight, and corrosion and abrasion resistant. Under stress, polyethylene pipe’s flexibility will allow it to deflect rather than crack, making it a standard for critical applications.
Aquatherm is made from engineered PP-R resin. PP-R resin has very high pressure capabilitiies, up to 415 PSI, and can be used in up to 200° F temperatures. PP-R has significantly lower expansion and contraction rates than traditional thermoplastic systems, and expands at a similar rate as copper pipe. PP-R replaces more costly copper, stainless steel, and other welded metal pipe systems. Aquatherm PP-R is backed by a 10-year, unlimited, multi-million dollar warranty!
Available items include: Handrail, Molded and Pultruded Grating, Structural Members, Platforms, Insulated Panels, Ladders, Custom Pultrusions, Plate, Buildings & Shelters, Bridges, Anti-Skid Surfaces, Tanks, Ductwork, Dampers, Fans, Manholes, Baffle Walls, Custom Fabrications, Odor Control Covers, Attachment Hardware, Under Slab Duct, and Custom Industrial & Commercial Applications.
1/8”
VARI-TECH LLCProtecting the Environment
HDPE PIPE & FITTINGSHDPE MANHOLES • PUMP STATIONS
STORMWATER STORAGE & REUSEDISTRICT HEATING AND COOLING
FIBERGLASS SYSTEMSSTRUCTURAL - GRATING - DUCT
AQUATHERM PP-RFUSIOLEN COMPOSITE PIPING
SPIROLITE LARGE DIAMETER THERMOPLASTIC
SYNTHETEXFABRIC FORMED CONCRETE
VARI-TECH Sales Engineers have extensive backgrounds and formal education in Civil, Mechanical, and Environmental Engineering fields. Field training of all VARI-TECH personnel is essential to providing high quality projects to our clients.
FULL LINE OF FUSION EQUIPMENT
SALE & RENTAL
Corporate Headquarters
Phone: (315)622-1800
Fax: (315)622-1811
www.varitech.com
Texas
(888)622-1881
Our technical field engineers average over 17 yearsexperience! Installation start-upis standard on every project. Wecan provide CAD drawings andsubmittal packages to complete the design.
VARI-TECH’S Fabrication and On-Site Installation experts are able to fabricate using thermoplastic and various alloys, as well as fiberglass reinforced plastics (FRP). Over the past 30 years, VARI-TECH has provided complete customer service, from assistance with simple pipe lay-outs to more sophisticated turn-key, skid mounted chemical and fluid handling systems.
VARI-TECH is a Certified McElroy Rental Affiliate with a degreed mechanic on staff. With a complete range of fusion equipment including PitBulls, TracStars and the original wheeled units, VARI-TECH has a thermal plastic pipe fusion machine for every HDPE and Aquatherm PP-R application.
We offer a course on the fusion process with McElroy machines. Students train in a classroom setting, as well as hands-on with a McElroy machine- guided by one of our fusion experts. Certification is granted upon successful completion of training.
Mid-Atlantic
(856)332-3918
New England
(978)887-0272
Doing More With VARI-TECH
Working with VARI-TECH means just that. When you choose VARI-TECH as your preferred product supplier, we work with you throughout the life of your project. Our scope of capabilities extends well beyond the typical waterworks distributor.
then, the scope of our business has spread across North America as we continue to expand. A partnership with Emco Corporation in
design, technicians, andfusion equipment at the Gowanus Canal Superfund Site in Brooklyn, NY—as featured by TIME Magazine. Watch the video and learn about more of our projects at www.VARITECH.com
Gowanus CanalVARI-TECH’s engineering and
WWW.VARITECH.COM
VARI-TECH is an acronym for VARIOUS TECHNOLOGIESVARI-TECH was established in 1989, initially selling engineered products and services to the northeastern United States. Since then, the scope of our business has spread across North America as we continue to expand. A partnership with Emco Corporation in 2004 has allowed growth into the export business.
VARI-TECH works with Facility and Consultant Engineers in order to ensure product suitability throughout construction details. Our technical personnel will partner with your design team to develop innovative, cost-effective, and imaginative solutions for all applications. VARI-TECH specializes in custom design and fabrications, by navigating environmental and situational application challenges, in order to best serve our customers from project conception to completion.