TEC MEP Detailed Design Services Quotation
-
Upload
syed-moazzam-ali-ali -
Category
Documents
-
view
395 -
download
26
Transcript of TEC MEP Detailed Design Services Quotation
Excellence through efficiency
Taiba Engineering Consultants
MEP Designing and Draughting services
MEMBER
Proprietary
Taiba Engineering Consultants, “www.TaibaMEP.com”
Confidential
1
INDEX
SL NO DESCRIPTION OF WORK PAGE NO
1. MEP DESIGNING & DRAUGHTING SERVICES-----------------------------2
2. SCOPE OF WORK FOR MEP SERVICES
a. HVAC Designing & Draughting scope of work----------------------- 4
b. Plumbing Designing & Draughting scope of work-------------------- 6
c. Electrical Designing & Draughting scope of work-------------------- 8
d. Firefighting Designing & Draughting scope of work----------------- 10
e. RevitMEP - BIM ----------------------------------------------------------- 10
f. Coordination Services Drawing--------------------------------------------10
g. Green Building Energy & Thermal Simulation------------------------- 11
h. Builders Works Drawing---------------------------------------------------11
3. QUOTATION-------------------------------------------------------------------12
Proprietary
Taiba Engineering Consultants, “www.TaibaMEP.com”
Confidential
2
MEP DESIGNING & DRAUGHTING SERVICES
About us:
TEC is a leading provider of MEP Design & Drafting services. With our client base
spread across in Middle East and Asia.
Our team consists of young talented Engineers and Draughtsman with Experience
in the relevant fields.
TEC is committed to provide highest level of accuracy and precision in our
projects within timeframe allotted by client without compromising with quality.
We aim for client satisfaction, value addition and customer service. Our working
is completely process driven and result oriented. We strive to continually improve
and update our process and systems to stay in tune with the modern technology.
Our client friendly MEP engineering services, flexibility and efficient project
management has contributed significantly in building long term business
relationships.
TEC has handled high-volume projects and consistently delivered accurate, on-
time services to the clients. We have a versatile team of HVAC (Heating
Ventilation & Air conditioning), Plumbing, Electrical & Fire fighting engineers and
draftsmen who specialize in design drawing and drafting services. A wide range of
expertise and depth of experience enables our team to complete even the most
complicated HVAC, Electrical, Fire Fighting and Plumbing projects with ease. We
follow international standards and Codes for MEP.
We provide our clients with creative and custom tailored MEP designing &
draughting services. We can efficiently handle conceptual, preliminary and
detailed design projects in compliance with your standards or requirements. We
specialize in converting hand drawn sketches, fully detailed MEP drawing or a
concept into accurate and precise 2D drawings. Some of the input formats which
we accept are PDF files, AutoCAD files, GIF or JPEG files, pictures, photos,
scanned images, hand-drawn sketches and electronic files. We use AutoCAD,
CADian and Revit MEP software.
A formal corporate quality policy with total commitment from every individual in
our organization is the backbone of our quality initiative. Dedicated groups for
process definition, improvement and Quality Assurance, formal training on
process and standards, are just some of the steps that we take to ensure Top
Quality. Intensive training, and highly skilled specialists for every operation
ensure quality and productivity well above industry norms.
Our customer segment includes Architects, Building Contractors, MEP
Consultants, Construction Companies and CADD service providers.
Proprietary
Taiba Engineering Consultants, “www.TaibaMEP.com”
Confidential
3
Description of Work: We receive your requirement along with CAD files. You can send the CAD files by
courier, email or upload them on our secure FTP server or DropBox. We review
and evaluate the inputs received. In case of any clarification, we contact you so
as to avoid unnecessary delay and rework. We send you a time and cost work
order (quote). Once the quote is accepted, we start your project and finalize the
delivery model. We allocate a project manager for each project who distributes
the work to the concerned team and informs them about standards, specifications
or your requirements.
On completion of work, it is passed to Quality department which follows three tier
checking system. We allocate a quality controller for each project who is aware
about the client requirements and is the first tier of our quality checking system.
The quality controller compares the original drawing with the completed drawing.
Infrastructure: At TEC we have world class infrastructure for handling the corporate projects.
We have PC’s with latest configuration which enables to handle the large scale 3D
models and files. We have power back up to save our esteemed client’s projects
files from crashing due to power failure.
We have internal Email system for monitoring the status of the projects on daily
basis.
Proprietary
Taiba Engineering Consultants, “www.TaibaMEP.com”
Confidential
4
SCOPE OF WORK FOR MEP SERVICES
HVAC DESIGNING & DRAUGHTING SCOPE OF WORK
We specialize in providing high quality, cost effective and prompt HVAC system
designing & Draughting services. Our customer friendly approach and ability to
offer timely and value-added services is what distinguishes us from others.
We can efficiently handle HVAC projects with complex requirements. Our HVAC
engineers ensure that your designs and drawings are accurate and flawless in
accordance with your requirements or standards.
Our HVAC services include: - Load Calculation (Cooling & Heating) using HAP 4.5, Elite Software or E20 form.
- Using the ASHRAE standard to determine loads and air-flows.
- We ensure that both latent and sensible load components are accounted for in
load calculations.
- Refining Estimation & Costing for a complete project.
HVAC Duct Design & its Layout - Determining the register locations and types, acoustic calculations, ESP -
pressure drop calculations (internal and external), duct lengths and connections
required to produce layout given construction constraints.
- Specifying the material for ducts and their size according to SMACNA standards.
Design and layout of accessories such as diffuser, dampers, grilles etc.
- Layout of duct system on floor plan for Air-conditioning & Ventilation System,
accounting for the direction of joists, roof hips, fire-walls and other potential
obstructions.
Pipe sizing & its Layout
- Calculating required water flow, pipe sizing by using McQuay, decides fittings
locations and dielectric isolators where needed to design the piping system.
- Specifying piping material and criteria for pipe sizing. Layout of piping system.
- Hydraulic Calculation for Chilled Water Pump Selection, NPSH Calculations.
Proprietary
Taiba Engineering Consultants, “www.TaibaMEP.com”
Confidential
5
Ventilation & its Layout - Ventilation & Infiltration by ACH or CRACK Method Std. ASHRAE 62.1, ASHRAE
90.1
- Car Parking Ventilation – Impulse & Induction.
- Kitchen Ventilation – Hood Designing.
-Toilet Ventilation – Commercial & Residential Building.
- ESP Calculations for Blower Fans.
- Exhaust Fans Selection – Performance Curve.
-Stair Well Pressurization System Designing.
- Dehumidifier Selection.
HVAC Equipment Selection & Layout
- Sizing HVAC equipment’s to sensible load using ASHRAE standards.
- Selecting equipment’s like AHU, FCU, ACCU, Water Cooled Condenser, Air
Cooled Condenser, Cooling Tower, Chiller Packages, DX Chiller, Flooded Chiller,
Refrigerant Coil, Water Coil, Package Units, Chilled Water Pumps with VFD,
Ventilation Fans, Valves and other System Accessories and its layout.
Schedule for Equipment’s
- Air Cooled Chillers, Pumps, Exhaust Fans, Cooling Tower Schedule.
- AHU’s, FAHU’s, FCU’s, DX Units, VAV’s, Split AC, Sound Attenuator Schedule.
- Ducting Accessories (Grilles, Diffusers, MD, FD, VCD, FAL, STL etc) Schedule.
- Smoke Extract Fans, Duct Heaters, Heat Exchangers, Air Curtains Schedule.
Proprietary
Taiba Engineering Consultants, “www.TaibaMEP.com”
Confidential
6
HEATING VENTILATION & AIR-CONDITIONING
HVAC
Heat & Winter Load Calculations
Equipment Designing & Selection its Accessories
HVAC Duct Designing
Chilled Water & Cooling Tower Pipe Designing
Package A/c, DX Units, Split A/c Designing
AHU & Pump Room Designing
Ventialtion Designing - Toilet, Kitchen, Car Parking
Expansion Tank Designing
Stair Well Pressurization System Designing
Refrigerant Pipe Sizing for DX Systems
De-Humidifier, VAV & Sound Attenuator Designing
ESP Calculations for Blower Fan Selection
Hydraulic Calculations for CHW Pump Selection
Bill of Quantity, Estimation & Costing of a Project
Shop Drawings
Schematic, Section, Isometric, Schedule Drawings
Proprietary
Taiba Engineering Consultants, “www.TaibaMEP.com”
Confidential
7
PLUMBING (WATER SUPPLY & DRAINAGE) DESIGNING&
DRAUGHTING SCOPE OF WORK
We specialize in plumbing engineering services ranging from design to drafting.
We add value to our client's business by providing them the competitive edge by
offering these high quality plumbing products & plumbing design services at
reduced/lower cost. The key to our success is our customer centric approach. The
dedication and commitment of our team assists us better to meet your
requirements, accuracy and on time delivery.
Our Plumbing services include: Domestic Water System
- Finding total fixture units for hot and cold water.
- Assigning fixture unit to each plumbing fixture according to the usage and
concerned codes. Converting fixture units to GPM (consider system predominant
flash valve or flash tank).
- Determining the distance of remote fixture and minimum pressure required for
it & checking the need of booster pumps for domestic water system.
- Sizing of all individual branches according to the flow requirement and friction
loss which is estimated per 100 ft. from available pressure.
- Selecting and locating fittings like backflow preventer, water hammer arrestor,
water pressure regulator etc.
- Estimating hot water demand, heater capacity selection.
Waste Water System
- Assigning fixture unit to each plumbing fixture according to your usage and
concern codes.
- Sizing sanitary drainage / vent risers according to the number of fixture units to
be carried.
- Determining if sump pumps or sewage ejector pumps are required
- Estimating the number of sanitary and vent risers.
- Sizing horizontal of sanitary drainage / vent run according to the number of
fixture units to be carried and permissible slope from code.
- Designing septic tank, soak away pits, dispersion trenches, oil & grease trap.
Proprietary
Taiba Engineering Consultants, “www.TaibaMEP.com”
Confidential
8
Storm Water System
- Estimating roof area and Determining the riser and horizontal run size from rain
water flow data and applicable code. Placing roof drains, leaders, main stacks,
floor drains, floor sinks, sprinkler risers, funnel drains, fire standpipe risers etc.
according with the HVAC system
- Verifying structural drawings for space conditions affecting the plumbing work
- Providing necessary pipe spaces, wall thickness, etc.
Riser Diagram
- Domestic Hot / Cold Water Diagram
- Sanitary Drainage and Vent Diagram
- Storm Water Drainage Diagram
Typical Enlarged Diagram& Section Drawings
- The diagram shows section, details of plumbing accessories and connection to
plumbing fixtures. It consists of drawing that shows all details required for
execution of site work. Also, includes designing of supports for pipe considering
implication seismic zone if applicable.
- Detailing of plumbing services & preparing plumbing drawing, isometric
drawings.
Standards: NPC, IPC, ASPE, NSPC
Proprietary
Taiba Engineering Consultants, “www.TaibaMEP.com”
Confidential
9
PLUMBING DESIGNING
PLUMBING
Sump Designing
Overhead Tank Designing
Pumping Main Pipe Desinging
Hydraulic Calculations for Pump Selection
Storm Water Drainage in Building
Auto Pneumatic System
Pressure Tank Sizing
Septic Tanks, Soak Away Pits, Dispersion Trenches.
Oil & Grease Trap Designing.
Garden & Fountain Water Pipe Sizing
Hot Water Estimation, Heater Capacity Selection
Water Treatment Plant
Sewerage Treatment Plant
Manhole Designing
Drainage Water Pipe Designing
Equipment Selection & its Accessories
Pump Room Designing
Bill of Quantity, Estimation & Costing of a Project
Shop Drawings
Schematic, Section, Isometric, Schedule Drawings
Proprietary
Taiba Engineering Consultants, “www.TaibaMEP.com”
Confidential
10
ELECTRICAL DESIGNING & DRAUGHTING SCOPE OF WORK
Electrical Designing Services: Our services range from concept of electrical transformer design to drafting for all
electrical systems (lighting, security, power and emergency power) within a
building. We consider every detail of the electrical projects with the aim to ensure
smooth start-up of your project and minimal field changes.
Our Electrical services include: Design of Lighting System
- Lighting Load Estimations and determining numbers of feeder for Lighting Panel.
- Light Fixture Layout Designing involving Normal, Emergency, Critical and Life
Safety.
- Light Fixtures Identification as per the Standards and Occupancy sensors,
dimmers etc., their selection, and placement at appropriate location.
- Calculating the Lux levels for each classified areas together with lighting
controls requirements for power savings
- Worst-Case Egress Lighting Estimation. Lighting Distribution Panel design and
designing Emergency Panel
- Determining the Lighting Panel Location based on provided inputs
- Switchgear Sizing & Determining Transformer Size for Lighting Distribution
system
Design of Power System
- Calculating the Loads for Electrical and Electronics equipment’s
- Calculating the connected Load on each Circuits
- Determining the Receptacle, Electrical and Electronics equipment’s for all areas
- Lighting Distribution Panel design and designing Emergency Panel
- Designing the Life safety and determining Earth Protection requirements
- Switchgear Sizing
- Determining Transformer Size for Power Distribution
Proprietary
Taiba Engineering Consultants, “www.TaibaMEP.com”
Confidential
11
Design of Power Distribution System
- Calculating the Total Power Requirements
- Determining Power Factor Correction requirements
- Calculating Power and Lighting Load determination on the basis of actual
connected equipment with appropriate demand/diversity factors, as per your
standards
- Determining the Main Transformer requirements
- Determining the size of Generator
- Determining the HV equipment’s, metering and protective switchgear
requirements.
- Determining Cable Trays, Trenches their optimum path.
- Switchgear Sizing
- Determining the cable and wire sizing
- Determining the one line diagram for distribution system
Design of Fire Protection System
- Determining the numbers of Circuits and device types according to defined
areas
- Control Circuits for Integration, Annunciation, Automatic Dialing and Building
Management Systems
- Fire Detector, Enunciator, Manual Points and Panel Layout
- Control Diagram for Remote Panels and Main Panels
- Riser Diagram, Device and Panel schedule
Drafting of Lighting, Power and Power Distribution System - Layouts of lighting depicting different Lighting fixture, Egress and Emergency
Lighting, Occupancy Sensors etc.
- Power Layout Plan showing Receptacles, Refrigerator, Microwave, Freezer,
Coffee Machine etc.
- Drafting of Luminaries, Power Equipment’s, Devices counts, Terminations
Diagrams, Control Circuits, LV/HV electrical devices, Panel Schedule, Material List.
Proprietary
Taiba Engineering Consultants, “www.TaibaMEP.com”
Confidential
12
ELECTRICAL DESIGNING
ELECTRICAL
Load Schedule Calculation
Designing of Lighting Distribution Systems
Designing of Power Distribution Systems
Designing of Fire Protection Systems
Fire Alarm Systems & Load Calculation
CCTV Designing
Single Line Diagram
Cable Sizing & Tray Designing
Transformer Selection
Panel Board (MDB, SMDB, SDB) Selection
Fault Level Calculation for Transformer
Short Circuit Calculation, Circuit Breaker Selection
Capacitor Bank Selection
Bus Bar Selection
UPS & Generators Selection
Telecommunication
Emergency Lighting
Conduit Designing
Earthing Layout
Public Addressable Systems
Lighting Arrestor
Voltage Drop Calculations
Selection of Solar Panel, Solar Battery, Solar Regulators
Bill of Quantity, Estimation & Costing of a Project
Shop Drawings
Schematic, Section, Isometric, Schedule Drawings
Proprietary
Taiba Engineering Consultants, “www.TaibaMEP.com”
Confidential
13
FIRE FIGHTING DESIGNING & DRAUGHTING SCOPE OF WORK
Fire Fighting Designing and Shop Drawing Preparation.
Hose reel and automated Sprinklers system
Fire Water sump capacity and overhead tank capacity.
Fire Water pipe sizing & Hydraulic Calculations using Elite Software.
Fire Water Jockey Pump, Main Pump & Diesel pump sets capacity.
BOQ: Bill of Quantity, Estimation and Costing (Complete project)
FIRE FIGHTING DESIGNING
FIRE FIGHTING
Fire Fighting Designing & Calculations
Automated Sprinkler Designing
Sprinkler Pipe Designing
Fire Hose Reel & Cabinet Designing
Fire Hydrant Pipe Designing
Fire Extinguisher Co2, ABC, Chemical Powder Designing
Fire Water Sump Capacity
Over Head Tank Capacity
Hydraulic Calculations for Fire Pump Selection
FM200 Designing
Fire Equipment Designing & Selection
Bill of Quantity, Estimation & Costing of a Project
Shop Drawings
Schematic, Section, Isometric, Schedule Drawings
CO-ORDINATION SERVICES DRAWINGS [CSD]
Coordinate the Architectural, Structural; RCP Drawings with the individual MEP
[HVAC, Plumbing, Firefighting and Electrical] services Shop drawing for
identifying the FFL, SOS, TOC, FCL & rerouting the MEP services at fouling.
CO-ORDINATION SERVICES
CO-ORDINATION
SERVICES
MEP Co-Ordination Shop Drawings
Schematic, Section, Isometric, Schedule Drawings
Proprietary
Taiba Engineering Consultants, “www.TaibaMEP.com”
Confidential
14
BUILDERS WORKS DRAWINGS [BW]
Representing the Slab & Wall openings for MEP Services (Duct, Pipes, Cable
Trays etc.)
BUILDERS WORKS
BUILDERS WORKS
Wall Openings & Filling
Slab Openings & Filling
Shaft Openings & Filling
Equipment Foundation For Equipments Installations
Pipe & Duct Supports Foundations
REVIT MEP - BUILDING INFORMATION MODELING
General Project Setup
Exploring the User Interface, Creating an Effective Project Template, Worksets and
Worksharing, Best Practices for Sharing Projects with AutoCAD & other Consultants.
Revit MEP for Mechanical
Creating Logical Systems, HVAC Cooling and Heating Load Analysis, Mechanical
Systems and Ductwork, Mechanical Piping.
Revit MEP for Electrical
Lighting, Power, Communications, Circuiting and Panels. Load Schedules
Revit MEP for Plumbing
Plumbing (Domestic, Sanitary, and Other Piping), Pipe Routing Auto & Manual,
Revit MEP for Fire Protection
Sprinkler Heads, Fire Pump Assembly, Creating a Fire Riser Assembly, Fire
Protection Piping Auto & Manual.
Creation of Families
Solid Modeling, Creating Symbols and Annotation, Parameters, Creating Equipment,
Creating Lighting Fixtures, Creating Devices.
REVIT MEP - BIM DESIGNING
REVIT MEP – BIM
Designing & Drafting of Mechanical Air & Piping System
Designing & Drafting of Electrical System
Designing & Drafting of Plumbing System
Designing & Drafting of Fire Protection System
Working with Annotations & Dimensions
Detailing Shop Drawings & Co-ordination
Creating Documentation Views
Proprietary
Taiba Engineering Consultants, “www.TaibaMEP.com”
Confidential
15
GREEN BUILDING ENERGY & THERMAL SIMULATION.
Environmental Simulation Solutions using eQUEST Software.
Importing the drawings in Energy Simulation Software, Creating the ASHRAE
Baseline model.
Creating the AS IS model and comparing it with Baseline Model Energy
Consumption, Working on various Energy Consumption Measures (ECM),
Selecting the ECMs on the basis of Life Cycle Costs.
Analyze simulation results and Propose ECMs and ranking ECMs on life cycle
cost basis.
Preparation of final proposed case, Documentation and Filling Templates for
LEED.
GREEN BUILDING ENERGY SIMULATION
GREEN BUILDING
ENERGY
SIMULATION
Environmental Simulation Solutions using eQUEST
Importing the drawings in Energy Simulation Software,
Creating the ASHRAE Baseline model.
Creating the AS IS model and comparing it with Baseline
Model Energy Consumption, Working on various Energy
Consumption Measures (ECM), Selecting the ECMs on the
basis of Life Cycle Costs.
Analyze simulation results and Propose ECMs and ranking
ECMs on life cycle cost basis.
Preparation of final proposed case, Documentation and
Filling Templates for LEED.
Proprietary
Taiba Engineering Consultants, “www.TaibaMEP.com”
Confidential
16
QUOTATION
Service (Designing & Draughting) Fee in Indian
Rupees per Sq.ft.
HVAC - HEATING VENTILATION & AIR-CONDITIONING 4
PHE - PLUMBING SYSTEM 4
ELECTRICAL SYSTEM 4
FIRE FIGHTING SYSTEM 2
BW - BUILDERS WORKS 2
CSD - CO-ORDINATION SERVICES 3
GREEN BUILDING ENERGY SIMULATION 2
BIM - REVIT MEP - BIM 6
DESCRIPTION
PROJECT NAME
Block-1,2,3
Comm
Building
Fareej Al Soudan
Off & Res
Nuaija, Prop
B+G+2 Off
AL WAAB
CITY 123 PLOT 93 PLOT 199
Area in Sq Ft 16,27,905 2,74,097 56,782
Area in Sq M 1,51,315 25,477 5,278
Floors 2B+G+M+5 B+G+2 Off & Res B+G+2 Office
Proprietary
Taiba Engineering Consultants, “www.TaibaMEP.com”
Confidential
17
QUOTATION
Proprietary
Taiba Engineering Consultants, “www.TaibaMEP.com”
Confidential
18
CONTACT US
Ashwin Mathew
Director
Tel.: 048-4404 2004, 08129022004
Website: www.TaibaMEP.com
Branch Offices at:
1) Hyderabad – Malakpet
2) Hyderabad – Mehdipatnam
3) Bangalore – Ganganagar
4) Kochi – Kaloor