TBSTING LABORATORY DI E,T]ROTEST CONTROL EAD peleti_en.pdf · 2017. 2. 2. · TBSTING LABORATORY DI...
Transcript of TBSTING LABORATORY DI E,T]ROTEST CONTROL EAD peleti_en.pdf · 2017. 2. 2. · TBSTING LABORATORY DI...
TBSTING LABORATORY DI RECTORATE
E,T]ROTEST CONTROL EADl0g Besarabia Str.. Sofia 1517, tel. (02) 4470 360; tel./fax (02) 8720 596; www.eurotest-control.bg, E-mail: [email protected]
Certiflcate of Accreditation, reg. No. 9 ilV I 2l .01 .2014 , valid until 3 I .05.2 0 I 6, issued b1
EA BAS, in accordance with the requirements of standard BDS EN ISO/IEC 17025:2006
QF 5r0-lversiorr 3 I 201,1
1.
2.
a-r.
4.
f,.
TEST REPORTNo. 6754 I 01.07.2014
Biomass, pellets and briquettes, biofuels, charcoal
(product designation-type, brand, soft, etc)
Client: TRON EOOD. The sample is submitted by the client'
(client's name and address, sampling report number and date))
Test methods: ETC Y31217.3-712010; BDS EN 14714'2:2009; BDS EN 14774-3:2010; BDS EN
14775:2009; BDS EN 14918:2010;BDS EN 15103:2010(standard or validated nlethods name and nurnber)
Specimens/Samples receiving date for test in the laboratory with Request Incoming No. 1155
126.06.2014
Tested samples quantity: 1 sample, taken from own production - a pellet plant
(samples factory number, samples quantity and their mass, batch quantity, iniport invoice nunrber, prodrrctron date)
6. Test performing perio d: 26.06.2014 to 01 .07 .20141r,,Vtrht'''
DIRECTOR OF TESTING LABORATORY DIRECTOR
No. 6754 I 01.07 "2014Page I of2
QF 510-lversion 3 I 2014
7. Test results
No. Index nan-re Unit Standards / validatedmethods
Sarnple incorningand outgoing
number in journal
Test results (value.
uncertainty)
Index valuelimit
and Testconditions
1 2 3 4 5 t) 7 a
Sample No. 1,lab.No" 141061 1, takenfrom coniferous anddeciduous woodpellets - ownproduction
BDS EN 14961 -
2:2011. class 41
1 Total moisture o//o BDS EN 14774-2:2009 4.49 r 0.13 <10 t (22!4) "CRH (30+60)%
) Analytical moisture /o BDS EN 14774-3:2010 1"10 r 0.02 not normalized t (22!4) "CRH (30+60)%
3 Ash (on dry fuel Ad) o//o BDS EN 14175:2009 0.55 r 0.01 <0.7 t (22!4) "CRH (30+60)%
4 Sulphur (on dry fuel Sd) Erc v3t2t7 .3-7 t2010 0.020 t 0.001 <0.03 rQ2r4)"CRH (30+60)%
5 Bulk density (on dry basisBD)
kglm" BDS EN 15103:2010 647r6 >600 t (22t4)'CRH (30+60)%
6 Calorific value (net on dryfuel Qnet,v,d)
MJ/kg BDS EN 14918:2010 18.53 10.06 not normalized t (22!4) "CRH (30+60)%
7 Calorific value (net onworking fuel Qnet,v,ar)
MJ/kq BDS EN 14918:2010 17.58 t 0.05 16.5 + 19.0 t (2214) "CRH (30+60)%
Opinion on the test results: The tested sample No. 1, lab. No. 1410611, by characteristics: Total moisture; Ash (on dry fuelAd); Sulphur (on dry fuel Sd); Bulk density (on dry basis BD); Calorific value (net on working fuel Qnet,v,ar) conforms to therequirements of BDS EN 14961 - 2:2011, class A1.
NOTE l: Test results refer only to the samples tested. Test report excerpts are not allowed to be reproduced without the priorpermission in writing of the testing laboratory.
TEST PERFORMERS: DIRECTOR OF TESTING
LABORATORY DIR
tens. fytii?raskoY*.......,.,*,.n ",.,,,...t'-,.
Angelova/
jtj
HEAD OF DEPARTMENT:
Radosvetla Krasteva/
No.67-54 101.01.2014 Page 2 of 2