Taylor Catalog

TAYLOR

Liquid Level FloatGauges

1

Junior Gauge

Senior Gauge

TAYLOR

Junior and Senior Domestic Tank Gauges

Float gauges are designed to indicate the liquid level contents ofLP-Gas containers. These gauges mount in a junior or a seniorflanged coupling. Gauges can be top, side or angle mounted forabove ground or below ground containers.

Standard Stock Sizes

Junior Gauges (H=1/2")

Item Number Part Number Tank Diameter Mounting

130299 JA124I 24" Top

130305 JA154I 30" Top

130310 JA192J 37" Top

130315 JA206I 41" Top

130301 JC124B 24" 45° Angle

130303 JC154B 30" 45° Angle

130307 JC190B 37" 45° Angle

130312 JC210B 41" 45° Angle

130316 JD080A 24" Side, End

130318 JD100F 30" Side, End

130320 JD120D 37" Side, End

130322 JD140C 41" Side, End

Senior Gauges (H=1")


130324 SA130A 24" Top

130326 SA160A 30" Top

130328 SA194A 37" Top

130330 SA214A 41" Top

130332 SC130B 24" 45° Angle

130334 SC160A 30" 45° Angle

130336 SC194D 37" 45° Angle

130338 SC214C 41" 45° Angle

130340 SD080D 24" Side, End

130342 SD100C 30" Side, End

130344 SD120G 37" Side, End

130346 SD140A 41" Side, End

2

3/4" Threaded Brass Gauge

1 1/4" Threaded Brass gauge

1" Threaded Brass Gauge

Liquid Level Gauges

Threaded Brass Domestic Tank Gauges

Float gauges are designed to indicate the liquid level contents ofLP-Gas containers. These gauges mount in a 3/4", 1" or 1 1/4" tankcoupling. The 3/4" and 1" gauges are for only top mountapplications. The 1 1/4" gauges are for top, side or angle mountapplications. These threaded Brass gauges are only foraboveground tanks.


3/4" Threaded Brass Gauges (H=1")


131640 UA130A 24" Top

131645 UA160A 30" Top

131650 UA194A 37" Top

131655 UA210A 41" Top

1" Threaded Brass Gauge (H=1")


131589 HA130ARN 24" Top

131590 HA156ARN 30" Top

131592 HA160ARN 30" Top

131594 HA162ARN 31.5" Top

131595 HA194ARN 37" Top

131661 HA210ARN 41" Top

1 1/4" Threaded Brass Gauge (H=1")


131600 TA130A 24" Top

131604 TA156A 30" Top

131605 TA160A 30" Top

131609 TA164A 32" Top

131610 TA194A 37" Top

131615 TA210A 41" Top

3

Junior Gauge

Junior Side or End Mount

Junior 45° Angle Mount

TAYLORJunior and Threaded Vertical Cylinder Gauges

Float gauges are designed to indicate the liquid level contents ofLP-Gas containers. These gauges mount in a junior adaptor or a1" or 1 1/4" tank coupling.


Item Number Part Number Cylinder Size Head

131545 JA176B 200 LBJunior

131540 JA250J 420 LB

131608 HA180A 200 LB1" MNPT

131619 HA254J 420 LB

131611 TA180A 200 LB1 1/4" MNPT

131616 TA254S 420 LB

Junior and Senior Motor Fuel Tank Gauges

Float gauges are designed to indicate the liquid level contents ofLP-Gas containers. These gauges mount in a Junior or Senioradapters. Gauges can be top, side or angle mounted. Standard directread dials are installed, with remote sending units available.


Junior Gauges (H= -1/2)


130247 10CC 10" Side, End

130248 12CC 12" Side, End

130250 14CC 14" Side, End

130251 16CC 16" Side, End

130252 18CC 18" Side, End

130253 20CC 20" Side, End

130254 22CC 22" Side, End

130255 24CC 24" Side, End

130249 12AC 12" 45° Angle

130256 14AC 14" 45° Angle

130257 16AC 16" 45° Angle

130258 18AC 18" 45° Angle

130259 20AC 20" 45° Angle

130260 22AC 22" 45° Angle

130261 24AC 24" 45° Angle

4

TU160B

Horizontal PositionMeasures 0 - 40 % Full *

Vertical PositionMeasures 0 - 20 % Full *

Liquid Level Gauges

Junior and Threaded Lift Truck Gauges

Float gauges are designed to indicate the liquid level contents of LP-Gas containers. Choose a gauge to measure your lift truck cylinder ina vertical, horizontal or both positions. These gauges are availablewith Junior, 3/4" or 11/4" brass threaded heads.


Universal Mount


131506 JU086B

20 LB

Junior

131507 UU086B 3/4" MNPT

131520 TU086B 1 1/4" MNPT

131512 JU160B

33 LB

Junior

131513 UU160B 3/4" MNPT

131530 TU160B 1 1/4" MNPT

131516 JU212A

43 LB

Junior

131517 UU212A 3/4" MNPT

131535 TU212A 1 1/4" MNPT

Vertical Mount


131510 JA086A 20 LB

Junior131514 JA166A 33 LB

131518 JA216A 43 LB

Horizontal Mount


131508 JD060A20,33,43 LB

Junior

131525 TD060A 1 1/4" MNPT

Universal Gauge

* Example is for 33 LB cylinder

5

Junior Gauge

Senior Gauge

TAYLOR

Junior and Senior Anhydrous Ammonia Gauges

Float gauges are designed to indicate the liquid level contents ofanhydrous ammonia containers. These gauges mount in a Junior orSenior adapters. Gauges can be top, side or angle mounted.


Junior Gauges (H= 1/2")


130400 BA124A 24" Top

130402 BA154A 30" Top

130403 BA214B 41" Top

130410 BC124A 24" 45°Angle

130420 BD080A 24" Side, End

Senior Gauges (H=1")


130430 AA130A 24" Top

130432 AA160A 30" Top

130434 AA194A 37" Top

130436 AA214E 41" Top

290000 A6480-13 * 41" Top

130438 AA240A 46" Top

290001 A6480-12 * 46" Top

130439 AA250A 48" Top

130440 AC130A 24" 45°Angle

130442 AC160A 30" 45°Angle

130444 AC194A 37" 45°Angle

130446 AC214B 41" 45°Angle

130448 AC240A 46" 45°Angle

130450 AD080B 24" Side, End

130452 AD100D 30" Side, End

130454 AD120E 37" Side, End

130456 AD140A 41" Side, End

130458 AD150A 46" Side, End

130459 AD160J 48" Side, End

* All stainless steel construction

6

Liquid Level Gauges

Visible “4" Float Gauges

Visible “4" float gauges are designed to indicate the liquid levelcontents of LP-Gas and Anhydrous Ammonia containers. Thesegauges mount in a senior gauge adaptor. Gauges can be top, sideor angle mount for above ground containers up through 96" tankdiameter.

Master Model A and B Gauges

Visible “4" float gauges are designed to indicate the liquid levelcontents of LP-Gas and Anhydrous Ammonia storage containers.Both the model A and model B master gauges feature a large 10"dual service dial face with a chrome retainer.

Model A - Standard construction gauge which mounts directly toa 2" MNPT x Senior adaptor with a teflon gasket. Gauges can betop or end mounted.

Model B - Heavy duty construction gauge which mounts directlyto a 2 ½" MNPT x 8-Bolt flange adaptor with a stainless steelspiral wound gasket. Gauges can be top or end mounted.


TankDiameter

TankOpening

ModelType

ItemNumber

PartNumber

72"2" A 138000 ME2434A

2 1/2" B 138005 ME2434B

82"2" A 138010 ME2738A

2 1/2" B 138015 ME2738B

84"2" A 138020 ME2839A

2 1/2" B 138025 ME2839B

96"2" A 138030 ME3245A

2 1/2" B 138035 ME3245B

104" to 108"2" A 138040 ME3650A

2 1/2" B 138045 ME3650B

130"2" A 138050 ME3862A

2 1/2" B 138055 ME3862B

7

TAYLOR

“Roadmaster” Gauges for Mobile Applications

Uniquely designed to withstand the tough-shock and vibrationassociated with mobile service of LP-Gas and AnhydrousAmmonia. These gauge mount in a standard 8-bolt flange.Applicable to end or side mounting. Standard and easily replaceable“4" easy viewing dial.


Tank Diameter Item Number Part Number

72" 131833 RM1833

74" 131834 RM1834

79" 131836 RM1836

84" 131838 RM2438

8

136521 Digital Receiver

Sensor

136619 Monitor

Liquid Level Gauges

Senders and Receivers for Motor fuel Service

Squibb-Taylor’s sender gives both direct and remote indication of LP-gasliquid level on all makes of cars and trucks when used with either a receiver,furnished by Squibb-Taylor, or the original equipment fuel gauge on thevehicle. The sender also works on all recreational vehicles .

Squibb-Taylor’s 0-90 ohm receivers are available with either an analog ordigital display. Receivers can be mounted at the dash or other remotelocations.

Part Number Ohms Application Description

136600 0 - 90 GM & RV’s Sender

136601 70 - 10 Old Ford & Chrysler Sender

136602 15 - 160 New Ford Sender

136607 110 - 10 New Chrysler Sender

136609 95 - 5 New Dodge Sender

136536 40 - 250 New GM Sender

136613 220 - 20 Dodge 2000 Sender

136650 0 - 90 GM & RV’s Sender & 18' Cable

136651 70 - 10 Old Ford & Chrysler Sender & 18' Cable

136652 15 - 160 New Ford Sender & 18' Cable

136657 110 - 10 New Chrysler Sender & 18' Cable

136659 95 - 5 New Dodge Sender & 18' Cable

136520 0 - 90 Receiver Analog Display

136521 0 - 90 Receiver Digital Display

136605 0 - 90 Sender, Analog Receiver & 20' Cable

136606 0 - 90 Sender, Digital Receiver & 20' Cable

Stationary Tank Monitor

The Monitor remotely indicates the liquid level of LP-gas in a stationarystorage tank. It consists of two parts - a sensor installed at the tank and amonitor placed at a remote location. Liquid level indication on the monitoris given by a multicolor bar graph. The sensor fits directly on Taylor orRochester Jr. float gauges and connects to the monitor with outside gradetwo conductor 22/24 gauge cable.

Low/normal level alarm indication is given by red and green LEDs.

Resettable alarm buzzer triggers when low level is sensed.

Adjustable alarm level can be preset anywhere between 0% and 99%.

Two DPDT dry alarm contacts available for other uses.

AC/DC operation with a 120 VAC wall plug-in adaptor included.

Interfaces with RTUs or programmable controllers.

DescriptionPart

Number Includes*

Monitor & Sensor forremote readout at one

stationary tank.136619

Digital bar graph, low levelindicator light, pre-settablealarm level, low level audio

buzzer with reset button* Optional: Relay dry contact output. NO/NC, 1 amp.

9

136618 Monitor

TAYLORTank Monitors for Residential and Small Commercial Applications

The system consists of two components - a sensor installed at the propanetank and a monitor placed at a remote location. Propane level in the tank isdisplayed by the monitor on the bar graph.

Intended for residences using either aboveground or underground storagetanks. Also can be installed at restaurants, Laundromats, car washes, andother small commercial/industrial applications.

Gives visual indication (multi-colored bar graph) of propane level in thetank.

Two versions available - 120VAC operation (transformer included) forcontinuous liquid level indication or 9 VDC battery operation with "ondemand" (push-button) liquid level indication.

Extremely compact, easy to install.

Sensor fits all Taylor and other competitive float gauges, tank modificationsare unnecessary to make installation.

Part Number Description

136617 Sensor and 9 Volt Battery Monitor

136618 Sensor and 120 VAC Monitor

Taylor Gauge Screws, Gaskets and Dials

Part Number Description

130118 Junior Gauge Screw

130119 Senior Gauge Screw

130219 Master Gauge Bolt

130121 Junior Gauge Gasket - Buna-N

130122 Senior Gauge Gasket - Buna-N

130130 Senior Gauge Gasket - Teflon

130040 Master & Roadmaster Spirotallic Gasket

130020 Visible “4" LP-Gas Dial

130025 Visible “4" NH3 Dial

130035 Master Gauge Dial

131839 Roadmaster Dial

10

Style BLarge dia. Locator pin hole on back of dial in this location

Jr- 1 1/4" Brass

130021

R3D- Jr Hall Compatible

130022, 130023, 130024 & 130028

2701 5TR Style - R indicates partially red face dial. Red area indicates low fuel.

130012, 130009, 130011 & 130026

Style ALarge dia. Locator pin hole on back of dial in this location

Liquid Level Gauges

Taylor Gauge Replacement Dials

Part Number Used On Notes

130005 (2201) Glue-on replacement for any Taylor Jr crimped-in dial. Will work on any Jr gauge

130010 (2201) Glue-on replacement for any Taylor Sr crimped-in dial. Will work on any Sr gauge

130012 (2701) Used in all standard above ground system tank gauges: Jr, 1" or 1 1/4" (pre-2002)Used in any Jr or Sr end, side or angle gauges which are not crimped-in type.

Guide hole in back of dial at 95% - Style A

130009 (2701) Used in any Jr or Sr top mount gauges which are not the crimped-in type or standardabove ground system tanks.

Guide hole in back of dial at 5% - Style B

130011 (2700) Used in underground tanks: Trinity , American Welding & Thompson Guide hole in back of dial at 95% - Style A

130026 (2700) Used on underground tanks: Quality & Chemi-Trol Guide hole in back of dial at 5% - Style B

130022 (5-2767) Remote ready dial used in all standard above ground system tank gauges: Jr, 1" or 1 1/4"(pre-2002). Used in any Jr or Sr end, side or angle gauges which are not crimped-in type.

Guide hole in back of dial at E - Style A

130023 (5-2768) Remote ready dial used on any Jr or Sr top mount gauge which is not the crimped-in typeor standard above ground system tanks.

Guide hole in back of dial at 30% - Style B

130024 (5-2876) Remote ready dial used in underground tanks: Trinity , American Welding & Thompson Guide hole in back of dial at E - Style A

130028 (5-2824) Remote ready dial used on underground tanks: Quality & Chemi-Trol Guide hole in back of dial at 30% - Style B

130021 (2701) Used on any 1 1/4" (post 2002) gauge. Same as Rochester Jr dial

11

TAYLOR

Information Needed With Gauge Orders

Simply order Taylor Gauges by the gauge code and an exact duplicateof the gauge from which the code was taken will be delivered. AllTaylor Gauges produced since 1964 have the gauge code stamped onthe head.

If gauge code is not available, specify the following information.

1. Type of Service: LP-Gas, Anhydrous Ammonia or other materials

2. Gauge Size (Head Size): Specify Junior, Senior, Brass Threaded (3/4", 1" or 1 1/4"), Master Model A or B or Roadmaster.

3. Type Mounting: Top, Side, End or Angle (if angle, specify angle above horizontal centerline)

4. Give Following Dimensions: H - Distance from outside of container to base of gauge headD - Inside diameter of container

For vertical cylinders:X - Distance from center of gauge adaptor to nearest inside wallO - Cylinder height

5. Dial Number of old gauge.

Taylor Catalog

Documents

Transcript of Taylor Catalog