Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit
description
Transcript of Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit
![Page 1: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/1.jpg)
Tatum Unipost ImplantTatum Unipost Implant Abutment Preparation Abutment Preparation Instructions using theInstructions using theTatum EZ-Prep KitTatum EZ-Prep Kit
![Page 2: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/2.jpg)
Healed Healed Implant Site Implant Site
using a using a Tatum RHA Tatum RHA Healing CuffHealing Cuff
![Page 3: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/3.jpg)
Remove the Healing Cuff by turning
the screw clockwise and then slide the cuff off.
![Page 4: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/4.jpg)
Tatum RHATatum RHAHealing Cuff and Healing Cuff and a Tatum Tapered a Tatum Tapered
ImplantImplant
![Page 5: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/5.jpg)
Select the appropriate
abutment (we now offer two lengths) and try it into the implant by using your
HT.04, HT.10, or HT.11 and turn it to the
left.
![Page 6: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/6.jpg)
Try-In using your HT.11.
Make sure the angled
abutments rotate freely. Next, using high speed
handpiece and a GW2 carbide bur, score the
post at approximate
vertical height required.
![Page 7: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/7.jpg)
Screw the abutment into your hand held
post holder instrument. Using
a GW2 carbide bur to reduce the vertical height. Use a carbide
disc to create a slot on the
occlusal of the post if needed so
a screw driver can be used as a
driver.
![Page 8: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/8.jpg)
Remember, the abutments have
left handed threads and
should rotate freely if they are
of the angled design. If any resistance is
felt, air abrade the threads with aluminum oxide
to allow free rotation during cementation.
![Page 9: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/9.jpg)
Rinse the internal of the implant with
water. Acid etch the internal of
the implant and abutment
threads with 37% phosphoric acid.
Wash and dry. Cement using Resiment or
Panavia.
![Page 10: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/10.jpg)
Carefully rotate the threaded post into place. Align the post to the predetermined position. Check for extrusion of
the cement through the vent
in the post.
![Page 11: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/11.jpg)
Allow adequate time for cementing
agent to completely set. Be
sure to cement one abutment at a
time. Mix a new batch of cement
for each abutment as it sets up so
quickly.
![Page 12: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/12.jpg)
Using abutments one
size smaller than the
diameter of the implant
creates a defined
shoulder. Chamfer the shoulder to
create a bevel on the implant.
![Page 13: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/13.jpg)
Handpieces rotate
clockwise, our
abutments tighten
counter-clockwise.
This assures us of never loosening the post
during the preparation
process.
![Page 14: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/14.jpg)
While most gross
dimensions are done outside of the mouth, touching up
these dimensions
should be done with copius amounts of water using
either SS White GWU16 or 18 carbide bur.
![Page 15: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/15.jpg)
Using a diamond bur, prepare the abutment surface by
lightly roughening
the surface to aid in the
cementation of your crown.
![Page 16: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/16.jpg)
Using a diamond bur,
perfect preparations and create
proper gingival
margins.
![Page 17: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/17.jpg)
Place a anti-rotational groove on
the abutment
extending it onto the
body of the implant
![Page 18: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/18.jpg)
The final preparations should have
proper gingival
margins and the anti-
rotational groove on
the body of the implant.
![Page 19: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/19.jpg)
Some clinicians
use retraction cord while taking their
final impressions
![Page 20: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/20.jpg)
Take a final impression with
crown and bridge
impression material.
Hydrocolloid impression
material works extremely well
with narrow diameter
implant posts.
![Page 21: Tatum Unipost Implant Abutment Preparation Instructions using the Tatum EZ-Prep Kit](https://reader035.fdocuments.net/reader035/viewer/2022062408/56813cb3550346895da65f6c/html5/thumbnails/21.jpg)