TRANSFORMER CONTROL

TAPMOTION® ED ISM®

TRIED AND TESTED DRIVE.INTEGRATED MONITORING.

2

TAPMOTION® ED ISM®

TAPMOTION® ED ISM®.THE INTELLIGENT DRIVE.

3

Capture, evaluate, store, and visualizetransformer data and drive the on-loadtap-changer. TAPMOTION® ED ISM®.Integrated intelligence.

As well as driving the on-load tap-changer, theTAPMOTION® ED ISM® enables all relevant power trans-former operating data to be captured and evaluated: For example, tap-changer monitoring or evaluations of transformer utilization. TAPMOTION® ED ISM® helps to purposefully plan operation and maintenance. The sturdy housing protects both the tap changer‘s motordrive unit and the integrated monitoring system. The TAPMOTION® ED ISM® is ideally suited to upgrading monitoring of older and smaller transformers.

Automation solutions such as voltage regulation and cooling control are optionally available with the TAP-MOTION® ED ISM® and can be used as complement for transformer control.

We would be happy to advise and help develop solu-tions tailored to your needs. Of course, we can also undertake commissioning on site if requested.

Be on the safe side when operating on-load tap-changers and transformers.With a robust drive and integrated expert knowledge. The increasing meshingof networks and the need for greater availability and reliability from theequipment make continuous condition monitoring and evaluation indispensable.The TAPMOTION® ED ISM® motor-drive unit is a practical way of simplifying operational control and asset management.

Minimum wiring, maximum flexibility.

The intelligent TAPMOTION® ED ISM® motor-drive unit is delivered from the factory with our ISM® Tech-nology. This is particularly well suited to the special conditions of energy technology. Commissioning is quick and easy as the transformer sensors can be connected and configured with ease. In addition to the superior monitoring functions, you also benefit from the freely assignable in- and outputs, enabling you to design your transformer monitoring as you wish.

The data captured and evaluated can be transferreddirectly to the control system. This greatly reducesthe amount of wiring needed during installation andsignificantly cuts costs compared with the conven-tional connection method. An integrated web serverwith ISM® Intuitive Control Interface (IICI) displaysthe data so there is no need for the time-consumingprocess of installing software packages.

TAPMOTION® ED ISM®

4

State-of-the-art automation solutions are combined with tried and tested MR drive technology in the TAPMOTION® ED ISM®. With more than 100,000 drives sold since it was launched in 1997, the TAPMOTION® ED is synonymous with safety, reliability, and robustness. Proven components, modular design, and our ISM® automation platform, tailored exclusively to the needs of energy technology, guarantee MR's superior quality for years to come.

RELIABILITY MEETS AUTOMATION.

TAPMOTION® ED

I Robust and resistant housing made from cast aluminum (protection class IP66) guarantees a very long life

I Flexible assembly thanks to variable rail systemI Modular structure provides huge scope for individualizationI Standard fastening and output geometryI Quiet transmission gear with zero-maintenance belt-type

gear as the transmission elementI Terminals arranged to suit customer for simple electrical

connection using user-friendly terminal technologyI Status indicators (red, amber, green) in motor-drive unit’s

viewing window

ISM® Technology (Integrated Smart Module)

I Integration of monitoring function in the TAPMOTION® ED motor-drive unit with tested and ready-to-connect solution

I Modular and efficient hardware design particularly suited to substation requirements I 28 or 42* digital inputs 24 V DCI 15 or 20* digital outputs 24 V DC I 4 or 8* analog inputsI Voltage measurement Un: 100 V AC (20...190 V AC)I Current measurement 0.2/1/5 AI 32 bit CPU with various communication interfaces

5

On-load tap-changer monitoring*

I Contact wear for OILTAP® V, M, MS, R, RM, G, T

I Maintenance recommendationI Oil carbonization for OIL-

TAP® V, M, MS, R, RM, G, T

DGA*

I Trend monitoring of up to four gases and moisture in oil

I Limit values preset in accordance with relevant standards

I Choice of 10 preconfi gured harmful gases

Basic monitoring

I System voltage, load current, frequencyI Effective, reactive and apparent powerI Load factorI Temperatures (ambient temperature,

OLTC temperature, TopOil temperature and hotspot calculation in accordance with IEC or ANSI)

I Aging rate and lifetime consumptionI Signals from motor-drive unit

(e.g. motor protective switch, motor running)

I Tap-change statistics of OLTC (number of tap-change operations per tap, time per tap)

I Status of protective devices (e.g. Buchholz relay, RS2001)

I Tap position (integrated in the ED, tap position indication in the visualization or via SCADA communication)

* optional

Freely assignable inputs andoutputs

Control system communication*

I IEC61850 Ed. 1, Ed. 2I IEC60870-5-101, 103, 104I DNP3I Modbus TCP, RTU, ASCIII Media converterI Redundancy switch (RSTP or PRP)I Other protocols on request

User-friendly visualization and evaluation

No matter whether you are in the control room or out and about – thanks to fl exible implementation, you can access the measurements of the ISM® via all common Internet browsers wherever you are, while also taking your safety requirements into account. The information is displayed clearly without the lengthy process of installing software. On demand we off er a visualization panel.

Cooling Control*

I Intelligent (based on type of cooling and load) cooling stage activation (2, 4 or 6 cooling stages); parameterization of the individual cooling stages possible

I Cyclic and load-dependent cooling stage activation

I Fan running alternation to equa-lize operation time of the fans

Automatic Voltage Regulation (AVR)*

I Basic automatic voltage regulationI U / I measurementI Parallel operation

Available with various function packages, the TAPMOTION® ED ISM® uses sensors to capture and process all important power transformer conditions and makes them available via the integrated web visualization.

FOR EVERYONE WHO LIKES TO CONCENTRATE ON THE ESSENTIALS.

6

TAPMOTION® ED ISM®

MR's ISM® Technology is a pioneering and standardized basis, covering all aspects of substation automation.

Software

I Robust operating system as the basis for all system and application functions, used in aeronautics and military technology

I Database of current and historical operating data as well as status and log information

I Web-based visualization in accordance with HTML 5 standard with SVG (Scalable Vector Graphics)

I All necessary control system protocols are available in client or server functionality

Hardware

I Modular and efficient hardware design I Integrated, flexible functionsI Specific modules for various tasks, such as

measurement or communicationI Supports all common interface standardsI 19" design or housing for installation on cap rail

in a control cabinet or in motor-drive unitsI Optional operator panel for visualization

ISM® Technology is the standardized hardware and software basis that is being used for all MR automa-tion solutions.

The hardware components and the universal software architecture are distinguished by their user-friendli-ness and flexibility. The system is, of course, designed to meet the special requirements of energy techno-logy with regard to reliability, robustness, and dura-bility. ISM® Technology is also open and flexible, supporting both the use of standard products as well as the integration of individual requirements in transformer substation automation. Regardless of the application, users benefit from standardized components, tools, and operating interfaces – in short: the ISM® Intuitive Control Interface (IICI)).

FUTURE-PROOFED. THE NEW ISM® TECHNOLOGY.

7

provide customized systems for data management, control system connections, regulation and control, equipment automation, and monitoring of energy supply components. Benefit from our decades of experience in on-load tap-changer regulation and monitoring.

Our all-around service includes:I Appraisal I AdviceI Development of a solutionI EngineeringI Development and implementation I Commissioning

Designed with future requirements in mind

ISM® is also available as a retrofit module for all TAPMOTION® ED motor-drive units supplied to date. All it takes is a few hours to fit your TAPMOTION® motor-drive unit with additional intelligence and bring it in line with your individual requirements. As an option, we can supply the ISM® in a separate stainless steel cabinet.

Customized systems are available for more demanding customers

On request, our experts will develop solutions matched perfectly to your needs. In the areas of energy supply, transmission, and distribution, we

Simple and cost efficient retrofitting:Photo 1 The action: The ISM® is installed by our expertsPhoto 2 The result: Fit for the future – thanks to additional intelligence in the existing motor-drive unit

All-around service from MR.

ALWAYS IN THE BEST HANDS.

Functionally integrated drive with modular automation solutions

I Modular and economic system, making ideal adaptation to all requirements possibleI Can be installed on any power transformer (no extra sensors needed)I Complex and individual automation and monitoring tasks possibleI Integration of function (monitoring, voltage regulation and intelligent cooling control)

in the TAPMOTION® ED motor-drive unit with tested and ready-to-connect solution

Reliable transformer monitoring

I Capturing, saving, and evaluating the necessary values related to every aspect of a transformer makes condition-based maintenance possible

I Direct transmission of information to the control system or fl eet management system (by bus) reduces the amount of wiring needed

Simple operation and state-of-the-art graphic display

I Intuitive user interface with simple operating conceptI Software does not have to be installed thanks to web-based visualization I Interface for remote access included as standardI Optionally available touch displays are easy to connect

Additional services

I Undertaking of commissioningI Undertaking of and assistance with Factory/Site Acceptance Tests (FAT/SAT)I System modernization – including system advice and wiring adjustmentsI General product trainingI Technical training at the Regensburg training center or at local MR subsidiariesI On-site hands-on training I Certifi cation support for systems

Maschinenfabrik Reinhausen GmbHFalkensteinstrasse 893059 Regensburg, Germany

Phone: +49 941 4090-0Fax: +49 941 4090-7001E-mail: info@reinhausen.com

www.reinhausen.com

Please note: the data in our publications may diff er from the data of the devices delivered. We reserve the right to make changes without notice.IN4182044/01 EN – TAPMOTION® ED ISM® – F0327301 – 07/15 – uw – ©Maschinenfabrik Reinhausen GmbH 2014

MORE POWER, MORE VALUE.

Be on the safe side when operating on-load tap-changers. With our expert knowledge and TAPMOTION® ED ISM®.