Tanxperts Hungary Kft....E-mail address [email protected] Contractor / Tender winner...
Transcript of Tanxperts Hungary Kft....E-mail address [email protected] Contractor / Tender winner...
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC - 2014.
ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL
FLOATING ROOF CASE STUDY
Tanxperts Hungary Kft. pioneer project solution & installation in Hungary
REV.: 1 DATE 06/10/2014
Page 1 of 22
Installation of the first aluminium (skin & pontoon) floating cover at existing 2000m3 AST’s Fuel storage site of LUKOIL Hungary Ltd. – Dunaföldvár, Hungary
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 2 of 22
Version 1.2; date: 06.10.2014. Presented by: Tanxperts Hungary Kft
Client approval: Yes ___ No _______
Investor/ Customer/ Client profile
Customer name LUKOIL Mayarország Kft
Division LUKOIL fuel storage terminal at Dunaföldvár
Site address Sas u 12. Dunaföldvár - H-7020 Hungary
Company address Benczúr u. 13. Budapest - H-1068 Hungary
Phone number +36 1 465 7600
Fax number +36 1 465 7645
Web site address www.lukoil.hu
Industry Oil company
Contact name Mr Gábor Szikszai
Title technical manager
E-mail address [email protected]
Contractor / Tender winner company
Contractor GIA-Hungária Kft
Address Újszász street 45/b/z
City, state, ZIP Code BUDAPEST, 1165 HUNGARY
Web site address www.gia.hu
Project name or title Floating roof installation - VR2013/00341
Project launch management and proceeding company
Contact name Mr Attila Dömötör
Branch Tanxperts Hungary Kft
Address 15th Óváros square
City, state, ZIP Code VESZPRÉM 8200; HUNGARY
Web site address www.tanxperts.com
Title general manager
Phone number +36302355521
E-mail address [email protected]
Solution offering CTS-TANK B.V. The Netherlands –
Aluminium pontoon type Internal floating roof
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 3 of 22
Installation of the 1st aluminium pontoon type Internal Floating Roof (IFR) in Hungary, fully compliant with the relevant industrial standars, rules, national legislations and fully approved by the Hungarian Authorities, due to the adaptation of MSZ EN 14015:2005 and the international experiences proceeding by Tanxperts Hungary Llc.
Our company profile
tanxperts™ is a new and innovative company with its focus on tanks and nothing but tanks. Our services do not stop at just inspections and consultancy.
It started as a friendship between two engineers with mutual interest in tanks and has led to found an international company.
tanxperts™ - main purpose is to create a “bridge” to get through to Europe and the entire World, to merge their common interests and to make sound and reliable work for their Clients.
tanxperts™ - is an international company with two locations, one in Hungary (Tanxperts Hungary Llc.) and the other in The Netherlands (T.I.S.). Both with a highly trained team, with special and unique knowledge regarding the storage tank service capability and competitive pricing.
tanxperts™ - focusing the aboveground vertical, cylindrical steel storage tanks, and to make them safe, minimize the deteriorations and operation problems, extend lifetime, and to keep under control the degradation mechanism of the tanks.
Tank inspection/ integrity service as per the required industrial standards, guidelines contribute to the optimization of the reliability and profitability of the storage tanks as per EEMUA 159; EEMUA 231; JIG, IFQP/ MOCQAT; EN ISO 9001:2008, and National legislations.
We are capable to supply a wide scale of services for your storage tanks. (for further information please see 'Inspection' and 'Products'
EEMUA and API inspections, inspection when construction of new and used tanks, maintenance/ repair, advice/ consultancy, as such quality control and assurance, to mention only a few.
Our motto is: 'preventing is better than repairing'.
For this purpose 'tanxkirt©' to prevent bottom of above ground vertical, cylindrical storage tanks corrosion caused by rainwater ingress.
Further services:
Supervision, and/ or Inspection of storage tanks according to the codes of EEMUA 159, RBI The program is fully compliant to all the required industrial standards and guidelines (EEMUA 159, API 653), Remaining life calculations, QA/QC etc.;
Provide advice, second opinion, assessment ensuring as per - EEMUA 159; JIG; IFQP; ISO 9001:2008; (API 650; API 653) familiar with most of NDT techniques
Supervision, observe and issue the Operational & Quality Manual, procedures, instructions; arrange the operational/ quality audits, investigate and recommend corrective- & preventative actions
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 4 of 22
Business situation
In order to prevent vapors generated by replenishment of the petrol storage tanks and the storage
of petrol in general from escape into the environment, as per the “Inspection of the Vapor Recovery
System at LUKOIL Magyarország Kft’s fuel storage site in Dunafödlvár, Hungary – EXPERT OPINION
5. Results & proposals”:
But the most obvious solution would be to decrease emission values: also, in view of the emission
requirements provide for in Decree No. 118/2011 VM on the Reduction of Quantities of Volatile
Organic Compounds (VOC) Origination From the Storage and Distribution of Petrol and from the
Filling of Motor Vehicles at Fuel Stations, it is appropriate to install internal floating roofs in the
petrol storage tanks.
Typical fixed (cone) roof aboveground vertical, cylindrical steel storage tank
Based on our vast experience, installation of internal floating roofs in the storage tanks in question
is technically feasible. With the use of floating roofs, the loss generated in the site could be
minimized, with VRU unit being restricted serve the fuel island only. We have prepared our
calculations for the use of internal floating roofs, with preliminary and secondary mechanical seal
taken into consideration. The result are summarized in Table 2 below.
1 AST 3 AST LOSS
Annual turnover (2011) (million liter) 26,09 78,29 -
Evaporation loss with fixed roof (liter) 32.128 96.384 0,1231%
Evaporation loss with floating roof (liter) 719 2.157 0,0027%
Table 2 – comparative table for losses with different roof types
The table reveals that evaporation loss of the site can be reduced by approximately 97% after
installation of floating covers.
Strategic and competitive drives, justification VRU expert opinion 4.0; 5.0 reduce the volatility of the
product.
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 5 of 22
Technical situation
Technical challenges AST system, describe, technology, etc, application of MSZ EN 14015:2005
It was a huge challenge to convince the authorities in Hungary to approve the technology as
providing the same quality and complies with the other regulations such as MSZ EN
14015:2005, that the most widespread and commonly used steel constructed internal floating
roofs does.
The successful delivery of the project was greatly supported by the openness of the relevant
authorities and replacing, using the regulations of the internationally approved standard "MSZ EN
104015:2005
Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above
ground, welded, steel tanks for storage of liquids at ambient temperature and above" instead of the
former Hungarian Standard MSZ 15633-1:1992 (Regulations of fire protection for flammable liquid
storages and service stations and equipments).
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 6 of 22
Solution
Tanxperts Hungary Llc. solution offered by CTS-Tank B.V. - compared CS and AL IFRs
During the installation is less with the yellow marked activities what are not necessary to apply in
the aspect of pontoon type aluminum IFC opposite the “old fashion” carbon steel internal floating
roof!
Description / main activity Description - details Description / main activity Description - details
1 Szerződések aláírva Szerződések aláírva
2 Engedélyek, tervek a helyszínen Engedélyek, tervek a helyszínen
3Tartály kitisztítva, LOTO munkavégzésre
alkalmas, szárazon átadva
Tartály kitisztítva, LOTO munkavégzésre
alkalmas, szárazon átadva
4 Geometriai felmérés, NDT szkenneléses Geometriai felmérés, NDT szkenneléssel
5 Lemezanyaggok beszerzése Lemezanyaggok beszerzése
6Zárszerkezet és úszótető
tömítés beszerzése
Zárszerkezet és úszótető
tömítés beszerzése
7
lángzárak, lángvisszacsapók
beszerzése - Protego (11-13
hét) tartály & IFR
lángzárak, lángvisszacsapók
beszerzése - Protego (11-13
hét) tartályra CSAK 2003-asra
8 IFC-lemez legyártása IFC-lemez legyártása
9 helyszínre száll ítás helyszínre száll ítás
10egyéb gyártmányok legyártása
és leszáll ítása
egyéb gyártmányok legyártása
és leszáll ítása
11
8-14 hét
megrendeléstől számított
elfogadott tervrajzok,
helyszínre száll ítással
8-14 hét
megrendeléstől számított
elfogadott tervrajzok,
helyszínre száll ítással
12 felvonulás felvonulás
13szerelőkapu kivágása, behúző
rámpa összeállítása
szerelőkapu kivágása, behúző
rámpa összeállítása
14elektromos hálózat
kialakítása
elektromos hálózat
kialakítása
15mintavevő csücsonk kivágása
a tetőn
mintavevő csőcsonk kivágása
a tetőn
16IFC-lemezek behordása,
összeállítása
IFC-lemezek behordása,
összeállítása
17 IFC-lemezek készre hegesztése IFC-lemezek készre szerelése
18 Vákuumvizsgálat Vákuumvizsgálat
19 palást felhegesztése palást felhegesztése
20 palást merevítő beépítése palást merevítő beépítése
21 belső rekeszfal beépítése belső rekeszfal beépítése
22 habterelő lemezek beépítése habterelő lemezek beépítése
23 külső válaszfalak beépítése külső válaszfalak beépítése
24 belsó válaszfalak belsó válaszfalak
25 úszótető megemelése úszótető megemelése
26 lábtartó cső + lábak beépítése lábtartó cső + lábak beépítése
27 úszótető lábra helyezése úszótető lábra helyezése
28 légző csonk légző csonk
29 búvó beépítése plusz búvó beépítése
30 peremlégző peremlégző
31mintavevő cső beépítése
csonkozással
mintavevő cső beépítése
csonkozással
32 szerelvényezés szerelvényezés
33 festés festés
34lángzárak, lángvisszacsapók
beszerelése
lángzárak, lángvisszacsapók
beszerelése
35zárszerkezet, tömítés beépítése
(primer, szekunder)
zárszerkezet, tömítés beépítése
(primer, szekunder)
36 tetőszellőző beépítése tetőszellőző beépítése
37 túlfolyó beépítése túlfolyó beépítése
38mintavevő cső csonkjának
beépítése
mintavevő cső csonkjának
beépítése
39
központi légző + vész-szint
kapcsoló beépítése + földelés
beépítése
központi légző + vész-szint
kapcsoló beépítése + földelés
beépítése
40 festés, javítás festés, javítás
41szereleőkapu
visszahegesztése,
szereleőkapu
visszahegesztése,
42 NDT vizsgálatok terv szerint NDT vizsgálatok terv szerint
43 hidrosztatikai nyomáspróba hidrosztatikai nyomáspróba
44 időszakos kettős tér vizsgálata időszakos kettős tér vizsgálata
45 tűzjelző átalakítása tűzjelző átalakítása
46 szintmérő hitelesítése szintmérő hitelesítése
47tartály hitelesítése úszótetővel
- vízzel
tartály hitelesítése úszótetővel
- vízzel
48 befejező NDT vizsgálatok befejező NDT vizsgálatok
49
túzvédelmi tűzvédelmi próba,
műszerek vizsgálata, hatósági
átadás
túzvédelmi tűzvédelmi próba,
műszerek vizsgálata, hatósági
átadás
50 tűzvédelmi tervfejezet tűzvédelmi tervfejezet
51 tűzjelzés kettő tartályra tűzjelzés kettő tartályra
52 organizációs költsgég organizációs költsgég
53tartály hitelesítése úszótetővel
- szkenneléses
tartály hitelesítése úszótetővel
- szkenneléses
SZERELÉS
s.sz.ÚSZÓTETŐ BEÉPÍTÉSE 2003; 2005
IFC - MŰVELETI TERV carbon steel
ANYAGBESZERZÉS
GYÁRTÁS
ÚSZÓTETŐ SZERKEZETI KIALAKÍTÁSA
ÚSZÓTETŐ FUNKCIONÁLIS ELEMEINEK BEÉPÍTÉSE
EGYÉB MUNKÁLATOK
TARTÁLY ÁTALAKÍTÁSA
EGYÉB TEVÉKENYSÉG
ÚSZÓTETŐ BEÉPÍTÉSE 2003; 2005
IFC - MŰVELETI TERV aluminium
ANYAGBESZERZÉS
GYÁRTÁS
SZERELÉS
ÚSZÓTETŐ SZERKEZETI KIALAKÍTÁSA
ÚSZÓTETŐ FUNKCIONÁLIS ELEMEINEK BEÉPÍTÉSE
EGYÉB MUNKÁLATOK
TARTÁLY ÁTALAKÍTÁSA
EGYÉB TEVÉKENYSÉG
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 7 of 22
Technology description
Pre-Construction Meeting / Job Site Orientation
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 8 of 22
Tank Roundness & Lean & Plumbness of tank measured with 3D laser scanning by TotalScan Kft.
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 9 of 22
Layout of the IFR and IFR Accessories
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 10 of 22
Installation of the tank mounted accessories
Air Scoop/Inspection Hatch
Overflow/Vent
Anti-Rotation Systems
Anti-Static Cables Inlet Diffuser
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 11 of 22
Installation of the IFR
A. Perimeter Sections
B. Pontoon & Main Beam Installation
C. Leveling the IFR & Beam Alignment
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 12 of 22
Cross Beam Installation
D. Manway/Pressure-Vacuum Vent
E. Automatic Tank Gauge Float Well not applicable F. Column Wells & Seals
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 13 of 22
G. Sample Well
H. Auxiliary Pontoons
I. Surface Sheeting
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 14 of 22
J. Drain Tubes
K. Perimeter primary and secondary seals
Final Inspection
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 15 of 22
Technical benefits
The modification of the HHL (lower with 520 mm) is minimal owing to the legs could move freely between
the low and high pin bolt.
Exactly the capacity of the tank is less, than before the installation the nominal volume was 2 million
liter, and it’s less approx. 90 k liter from the total.
Technically the installation of the aluminium pontoon floating cover much more faster. The time of
completly assembly is 1 month (scaffolding and install the vents, and overflows) is less with 1/3rd
opposite the carbon steel (minimum 3 month).
There are not necessary to cut the tank shell and welding the carbon steel floating roof inside, welding
back the shell and finally inspect all the welding, what takes so long. All the six men (technical staff)
could carry the aluminium IFR through the side man-hole into the tank, and doing the entire assembly
what are the screwing and drilling.
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 16 of 22
Business benefits
Business benefits provided – less work, less men-hour, less money, more volume, more business –
see Solution point (not need to cut the shell of the AST)
The capacity of the tank is less, however the level is reduce, the volume less approx. 90 k liter from
the total 2 million, and it concerns the owner won 90k liter volume/ uploading compare with the
carbon steel roof, as itself the aluminum pontoon floating cover is not as heavy as the carbon
steel.
It is more convenient and effective to decrease the output values: according to the requirements
defined in the ordinance 118/2011VM regarding the volatile organic compounds from petrol
storage, distribution and the vehicle filling at the gas stations installing an internal floating roof into
the gasoline storage tank is justified.
In our opinion the installation of the internal floating roofs are feasible into the tanks previously
examined. Installing such floating roofs the loss generated at the terminal can be reduced to the
minimum, the VRU equipments should only support the filling island. We have conducted our
calculations for the internal floating roof with mechanical primary and secondary sealings. For the
results see table #2. for the detailed calculations and data inputs see .
According to the table it can be identified that the evaporation loss of the terminal can be reduced
by 97% using the internal floating roof.
If the owner decides on installing the IFR, the following tasks must be carried out in order to
operate the steam recovering system of the terminal:
Detailed static and solidity calculations for the given tank incorporating the future demands
It is highly recommended to carry out these calculations as a supplement to the regular ten
year inspection (11/1994.(III.25.) IKM) The fact that the cleaning of the given tank is
scheduled for 2016. such a major change implies that cleaning.
Preparation of a technical, electricity, and fire prevention certification and installation plan
of the required new and modified elements
permission for the planned maintenances, modifications by the respective authorities
the modification of authorization of the tank and the steam recovery system should be
requested with the supervision of the respective authorities
1 AST 3 AST LOSS
Annual turnover (2011) (million liter) 26,09 78,29 -
Evaporation loss with fixed roof (liter) 32.128 96.384 0,1231%
Evaporation loss with floating roof (liter) 719 2.157 0,0027%
Table 2 – comparative table for losses with different roof types
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 17 of 22
Literature what Tanxperts Hungary Llc. used
Inspection of the Vapour Recovery Unit (VRU) System at LUKOIL Magyarország Kft’s fuel storage
site in Dunafölvár, Hungary – EXPERT OPINION Iktatószám: K-0117/2012; 2012. június 25.
requested by LUKOIL Magyarország Kft.; prepared by GIA-Hunágria Kft.
EPA OEQPS report – Appendix #1
Services provided by other groups or companies
LUKOIL Magyarország Kft – client, investor
www.lukoil.hu
GIA-Hungária Kft – contractor company; outsourcing and manpower –
www.gia.hu
Tanxperts Hungary Llc. – entire project management, solution providing, proceeding best practice –
www.tanxperts.com
CTS Netherlands B.V. – supply solution/product and onsite supervision –
www.cts-tank.com
Kraftwerkbau Kft – welders, assembly, manpower, tools –
www.kraftwerkbau.hu
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 18 of 22
Appendix #1
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 19 of 22
Appendix #1
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 20 of 22
Appendix #1
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 21 of 22
Appendix #1
[email protected] COPYRIGTH © TANXPERTS HUNGARY LLC –
2014. ALL RIGHTS RESERVED. ALUMINIUM PONTOON INTERNAL FLOATING COVER - CASE STUDY
Page 22 of 22
Appendix #1