Tannoy Professional Catalogue

Professional full range cataloguetannoy.com

6483

112

9 / 0

112

professionalrange

catalogue2011/12

tannoy.com

Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: [email protected]

TCGI (ROW sales) T: 00 45 8742 7000 E: [email protected]

TCGA (Americas sales) T: 00 1 (519) 745 1158 E: [email protected]

Tannoy Middle East T: 00 971 (04) 4401208 E: [email protected]

Tannoy adopts a policy of continuous improvement and product specification is subject to change.

Dual Concentric, Integrip, Q-Centric Waveguide, VNET, PowerDual, Point Source Waveguide and ICT

are trademarks of Tannoy Limited. IntelliDrive Energy Efficient Amplifier is a trademark of Lab.gruppen

AB.All other trademarks remain the property of their respective owners. Copyright (c) 2011 Tannoy

Limited. All rights reserved.

Front Cover aw:Layout 1 12/1/12 16:09

No maintenance of Tannoy products is necessary.

All of our products have been produced and tested with care andprecision to give first-class service.

All passive components are guaranteed for a period of five years fromthe date of purchase from an authorised Tannoy dealer subject to theabsence or evidence of misuse, overload, or accidental damage.

All active and electronic components are guaranteed for a period of oneyear from the date of purchase from an authorised Tannoy dealersubject to the absence of, or evidence of, misuse, overload oraccidental damage.

If at any time during this warranty period the equipment proves to bedefective for any reason other than accident, misuse, neglect,unauthorised modification or fair wear and tear, we will repair any suchmanufacturing defect or, at our option, replace it without charge forlabour, parts or return carriage.

If you suspect a problem with a Tannoy product then, in the firstinstance, discuss it with your Tannoy dealer. If you require furtherassistance then we ask that you deal directly with your local Tannoy distributor.

Note:DO NOT SHIP ANY PRODUCT TO TANNOY WITHOUT PREVIOUSAUTHORISATION.

This warranty in no way affects your statutory rights.

WARRANTY STATEMENT

SPECIFICATION NOTES

The specifications in the professional section of this catalogue areanotated as follows:

1. Average over stated bandwidth. Measured at 1 metre on axis.

2. Unweighted pink noise input, measured at 1 metre in an anechoic chamber. A full range of measurements, performance data, and Ease™ Data can be downloaded from www.tannoy.com

DEVELOPMENT POLICY

Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods willalways equal or exceed the published specifications, which Tannoyreserves the right to alter without prior notification.

071

Front Cover aw:Layout 1 12/1/12 16:09

CONTENTS

004

014 071INTRODUCTION004 Pioneering Heritage 006 Technology

010 Applications

PROFESSIONAL014 Inceiling / Inwall 026 Architectural

038 Passive Sound Reinforcement

046 Powered Sound Reinforcement

056 Live / Rental Sound 060 Amps / Control

066 Subwoofers

WARRANTYWarranty Statement

Specification Notes

Document Policy

Tannoy Text2:Tannoy Text 12/1/12 14:59

Few companies' products have such a profound impact on ourlives that their names enter the dictionary as generic descriptionsfor their inventions. There are notable exceptions such as Biro,for its ballpoint pen and Hoover for its vacuum cleaner. But in theaudio field, Tannoy stands alone for its success in developing earlypublic address systems and then continuing its reputation forpioneering audio solutions. The word Tannoy is synonymous withsound, appearing in the dictionary as: 'a communicationssystem with loudspeakers, used for making announcements inpublic buildings.' The phrase 'Over the Tannoy' is universallyused to describe a PA announcement.

Tannoy is one of the oldest and most prestigious audio brandsin the world, having been founded as the Tulsemere ManufacturingCompany back in 1926. The name originates from a solid-staterectifier invented by company founder, Guy Fountain, made froman alloy or mixture of Tantalum and Lead. This Tantalum-Lead Alloywas the basis of the now world famous brand name of Tannoy.

Today, Tannoy is the brand name that can be found on many ofthe most prestigious sound installations throughout the world.Examples include the Hong Kong Convention Centre, the SydneyOpera House, the London Palladium and the Hard Rock Hotel inLas Vegas, and most recently, the Burj Khalifa and Atlantis HotelResort in Dubai and Yas Marina Hotel on the Abu Dhabi F1 circuitto name but just a few. The company’s Scottish factory HQ islocated in Coatbridge, near Glasgow where they’ve been basedfor the past 35 years.

Product development has been even more energetic and excitingsince Tannoy became part of the TC Group of companies in2002. TC Group now comprises of several individual audiotechnology businesses, which includes TC Electronic, a leader inthe field of digital sound processors for the MI market, as well asSwedish amplification specialists Lab.gruppen. The combinedexpertise of Tannoy, Lab.gruppen and TC Electronic is allowingthe companies to share research and development and award-winning products like Tannoy’s new QFlex series beartestament to this exciting synergy.

Presently, Tannoy remains active in three key audio sectors:Professional/Commercial Audio (the exclusive focus of thiscatalogue), Residential Hi-Fi and Studio Monitors. In each ofthese market sectors, Tannoy continues to incorporate highlydeveloped derivatives of the Dual Concentric™ driver into itsproducts maintaining the sound principles behind the originaldesign concept in that it combines transparent, fluid performancewith true point source symmetrical dispersion properties. Therecent introduction of the highly acclaimed VQ Series soundreinforcement system is a perfect example of this cutting edgeevolution of a consistently developed principle.

Pioneering Heritage

Tannoy stands alone for its success in developing early public address systems and then continuing its reputation for pioneering audio solutions.Today, Tannoy is the brand name that can be found on many of the most prestigious sound installations throughout the world.

005


Unlike ordinary drive units, the Dual Concentric is effectively two

drivers properly merged into one. The high-frequency unit is positioned

on the back of the low frequency driver so that they are effectively on the

same axis. With this system the sound energy is propagated from the

same point anddelivered through the centre of the low frequency

cone – a true point source. The Dual delivers a spherical wave front that

ensures even dispersion in the horizontal and vertical planes, providing

exceptional off-axis performance.

Discrete loudspeakers have an inherent design flaw in that each drive

unit is an acoustic source of its own. While the components are

physically aligned on the vertical axis they cannot remain so except for

at one listening point. Even those discrete systems with rotating horns

suffer from a significant ‘suck-out’ in the crossover region and no amount

of DSP processing can correct this phenomenon. The constant directivity

characteristic of the Tannoy Dual Concentric overcomes such time

alignment problems.

Dual Concentric Driver Technology

TECHNOLOGY


Discrete driver speaker systems cannot reproduce signalsaccurately because their sources are displaced in space.

In a Dual Concentric driver the signal sources are perfectlyaligned, resulting in smooth response and a wide listening areain both horizontal and vertical axes.

Signals remain perfectly aligned over a wide area in both verticaland horizontal axes

RESULTANT

HARMONIC RELATIONSHIPS PRESERVED USING A SINGLE POINT SOUR

TIME

POINT SOURCE

SECOND HARMONIC

��

��

�� TOP VIEW FRONT VIEW

No Alignment

High Frequency Low FrequencyMid Frequency

TOP VIEW SIDE VIEW

No Alignment No Alignment

Signals alignedonly in narrowband on one axis

SIDE VIEW

The Dual Concentric driver exhibits better harmonic alignment, the effect of which is to deliver a more natural sound with superb tonal balance and greater intelligibility. Propagating a spherical wave front aligned on all three axes, Tannoy’s point source driver delivers even dispersion into a wide listening field in both the horizontal and vertical planes. Optimal transient performance and sound quality is achieved bythe integrated design approach of the Dual. An even response throughout the listening area and a constant time delay over the frequencyspectrum provides exceptional off-axis performance.

007

Technology

Even when delays are applied to compensate for driver alignment, signals can only be aligned along a narrow listeningplane on one axis.

The controlled even dispersion and greater intelligibility of the Dual Concentric constant directivity drive unit ensures that the speaker output can be more accurately targeted to where it is needed.

Dual Concentric explained

HARMONIC RELATIONSHIPS USING MULTIPLE SOURCES

DISPLACEDSOURCES DIFFERENT RESULTANT

TIME

HARMONIC RELATIONSHIPS PRESERVED USING A SINGLE POINT SOURCE

POINT SOURCE

TIME

RESULTANT

SECOND HARMONICFUNDAMENTAL

THIRD HARMONIC

TIME

ORIGINAL VERSUS DISTORTED RESULTANT

DISTORTED MULTIPLE-SOURCE RESULTANTORIGNAL SINGLE-SOURCE RESULTANT

SIG

NA

L

PHASE RESPONSE OF A TYPICAL NON-ALIGNED SYSTEM PHASE RESPONSE OF A TANNOY DUAL CONCENTRIC SYSTEM

PHASE NOT INDEPENDENT OF FREQUENCY PHASE SUBSTANTIALLY INDEPENDENT OF FREQUENCY


008

ICT™ Driver Technology

The point source configuration of the Tannoy ICT driver’s mid-bass andtweeter sections ensures a wide and controlled dispersion for optimum coverage. By utilising a wireless electromagnetic tweeter that does not require a crossover and cannot be burned out from heavy or abusive use.This (Inductive Coupling Technology) drive unit also addresses the two mostcommon component failures experienced in background music and soundreinforcement systems, the tweeter and the crossover reliability.

The use of an inductively coupled 25 mm (1.00”) Duralumin domed wirelesselectromagnetic tweeter means that no crossover is required in the design.The high frequency dome has a deep drawn skirt which sits on the inside ofthe low frequency voice coil in the same magnetic gap. Like a single shortedturn, it is induced with high frequency information generated by the lowfrequency voice coil, which is fed a full bandwidth signal.

VQ Driver Technology

Cutting Edge Point Source Driver The VQ products utilize a unique driver technology to radiate a coherentsingle point source for superior dispersion control when coupled to oursingle horn. This advanced design aligns the acoustical centres of thetransducers providing a single coherent wavefront emanating from thethroat. The driver uses two concentric annular ring diaphragms, coupled toa uniquely engineered Point Source WaveguideTM. The larger of the twodiaphragms has a 3.5” voice coil and reproduces frequencies from 400 Hzto 7 kHz. Another major advantage here is that there is no crossoveranywhere near the vocal region ensuring the most natural and phasecoherent reproduction at this critical area. The 2” HF diaphragm takes overat 7 kHz to 22 kHz by way of a passive or an active crossover. The externalcasting features extensive heat-sinking ensuring good heat transfer for highpower handling and very low power compression.

Horn Design Without CompromiseThe use of a Dual Concentric compression driver results in a wavefront atthe throat of the horn being perfectly coherent across its frequency series.The MF/HF transducer loads into a large & proprietary designed commonhorn. There is a huge advantage here in comparison to acoustic sourceshither to used with horns which consist of an HF compression driver and aseparate midrange compression driver, each with its own horn. Invariablythere is interference between the midrange and high frequency at thecrossover. This results in uneven off axis performance, even if the HF horn ismounted in front of the MF horn. This artefact is compounded even further ifthe sources are displaced on the front baffle – No Exceptions.

For more information on VQ Series technology, see page 042.

Technology

Magnet assembly

Low frequency voicecoil receiving full bandwidth

Moulded polypropylene lowfrequency cone

Phase plug

Dust cap

25 mm (1.00”) Duralumin domeinductively coupled


009

QFlex Driver TechnologyThe key to our award-winning QFlex beam-steering technology lies in theunique driver assembly design and the revolutionary software steeringalgorithms. To achieve the desired level of acoustic control, it’s crucial that thelow frequency driver elements are densely spaced like the high frequencydrivers for effective operation over their pass-band. The 3” and 4” low frequencydrivers in QFlex have been optimized with a combination of FEA (finite elementanalysis), Klippel™ Analysis, and laser inferometery. With a highly efficientneodymium magnet structure and under-hung voice coil, we are able to achievelarge linear excursions while maintaining distortion free performance. Thisaffords us the desired low frequency performance while maintaining our dense spacing.

We also developed a very unique high frequency array solution, resulting in an 8element array with a specially designed neodymium magnet structure allowingfor very dense spacing of the sources. The dome centres are only 30 mm apart,banishing aliasing (lobing) to frequencies beyond 12 kHz Thermal powerhandling is further augmented by the inclusion of a common heat-sink on therear of the high frequency array.

For more information on QFlex technology including the innovative Beam EngineTM software, see page 034.

VNETTM Networking

VNET is Tannoy’s proprietary loudspeaker network protocol, comprising ofboth software and hardware DSP components. VNET allows for systemoptimisation and real-time diagnostics of an installed sound system, viastandard Ethernet network. The technology is available as part of many ofTannoy’s professional sound reinforcement systems including VQ Series, V Series and QFlex.

For more information on VNET technology, see page 065.

Tannoy Online Resources

This catalogue is intended only to give a summary overview of Tannoy’s Professional audio solutions. For more in-depth technical specification andperformance measurements of all products featured within, we stronglyrecommend you visit the Tannoy website at Tannoy.com. All Professionalproduct data can be located in the Professional section (navigation bar onleft) and is searchable by loudspeaker type (or category), by series name orby application type. Full data sheets, manuals, drawing files and EASE filesare available to download where applicable. The dedicated DOWNLOADSsection also allows for quick and easy search by sector and product series,and custom selection of the specific files you require, for collation into ahandy zip file saved to your computer.

The Professional section of the website also has an invaluable REFERENCEPROJECT LIBRARY resource where you can see Tannoy product in actionin a variety of real world application scenarios. We recommend you checkthis out next time you visit the site.

Don’t forget to sign up for the regular Over The Tannoy newsletter and jointhe Tannoy professional community via Facebook, Twitter and Youtube – alllinks are easily located on the Tannoy homepage.

For more in-depth technical specification and performance measurementsof all products featured within, we strongly recommend you visit theTannoy Pro website at Tannoy.com/pro

Technology


010

Tannoy manufacture professional loudspeaker systems for just about every possible end-use application, ranging from discrete in-wall and in-ceiling installed sound to large scale, clustered arraysdesigned for high SPL demanding applications such as stadium andarena sound. Many of Tannoy’s premium products feature thecompany’s world renowned Dual Concentric point source drivertechnology, delivering class-leading acoustic performance in justabout any situation, no matter what the constraints are. Whateverthe size and scale or the particular acoustic characteristics of avenue or environment, Tannoy can offer the perfect tool for the job.

Applications

One Point Source, Endless Applications


011

Applications

QFlex delivers clear message

Frankfurt has devoted an entire establishment to the story of howinformation has been passed around since earliest human history – theFrankfurt Museum of Communication situated on the city’s Main riverbank.So it’s perhaps a most fitting environment to find Tannoy’s QFlex steerablearray system installed, being one of the most cutting edge examples ofmodern communication technology.

The modern, transparent and open 4-storey building invites visitors on a journey of discovery through the ages, looking at how means ofcommunication have developed and evolved. As is typical with examples ofmodern architecture such as this, extensive use has been made of hardreflective materials such as glass, exposed concrete and expansivehardwood flooring. While this allows for open, well-lit spaces, it often leadsto spaces that are acoustically extremely challenging. And so it proved tobe, as the initial years of the museum have been blighted by frequentcomplaints from visitors about the poor intelligibility of both speech andbackground music – especially where audio program material was part of the various exhibits.

The irony in being faced with a major communication challenge at this particular museum certainly isn’t lost. Thankfully, such acoustical problemshave been overcome however, thanks to Tannoy’s revolutionary QFlexbeam-steering array system. Just four QFlex 16 devices were all that wasrequired to cover the majority of the affected areas, installed around themain circulation spaces of the museum, discretely mounted on theconcrete structural pillars. The final results here in Frankfurt speak forthemselves, not only has QFlex solved a major communication problem forboth staff and visitors, it has done so in the most discrete way – with verylittle impact on the crisp, clean lines of this modern piece of architecture.

Whatever the size and scale or particular acoustic characteristics of avenue or environment, Tannoy can offer a problem solving loudspeakersolution that delivers performance and value

With such a landmark construction project as Dubai’s world famous Burj Khalifa, comes a need to consider every detail carefully and so everycomponent of the development has been specified with the highest qualityin mind. This premium specification extends to the installed sound system,and so it’s not surprising to find Tannoy’s industry renowned range of in-ceiling and in-wall loudspeakers integrated throughout the vaststructure, on almost every single one of its 160 habitable floors in fact.

Over 5,000 of the Scottish-based speaker manufacturer’s CMS Series in-ceiling loudspeakers have been installed, along with over 1,000 IW Series in-wall speakers, providing an unrivalled standard of audio coverage throughout the many internal spaces of this vertical cityincluding the lobbies, corridors, terraces and reception areas of allpublically accessible floors. The majority of the in-ceiling loudspeakersinstalled were CMS 501PI, which benefit from being supplied with aseparate pre-install back can. These zinc plated, fully wired backcans are designed to be pre-installed into newly constructed, non-suspended ceilings leaving the product to be inserted at thefinal system commissioning stage of the install. This makes themparticularly suited to large scale, potentially complicated new-builddevelopments such as the Burj Khalifa, where the contractor needsto get in and complete installation and commissioning in very strict time frames.

Taking superior quality audio to new heightsProject: Burj KhalifaLocation: Dubai, UAE.Type: Mixed commercial office,

residential and hotel

Project: Museum of Communications

Location: Frankfurt, Germany

Type: Museum


012

Applications

Obsessive about dance music

Whilst many consider the likes of Berlin, London and Ibiza to be the clubbing hubs of Europe, on the continent’s often overlooked peripheries,there are some surprisingly high-end venues being created. One such venueis Obsession, located in the Transylvanian town of Cluj-Napoca. Obsessionis a subterranean club entered via a long golden passageway leading directlyinto the main room. Here interior designers Indestudio have created anintimate space that mixes shiny onyx-black, gold-leaf and cut glass. SGMIdea Series moving heads provide the main dancefloor action while LEDcove lighting and illuminated panels allow the Obsession team to subtly alterthe club’s identity from one night to the next. It is the sound system,however, of which the club is most proud.

The launch of the VQ series in 2008 marked Tannoy’s re-entrance into thehigh energy large scale club market. Whilst it has already been used to greateffect in a number of venues (such as Es Paradis in Ibiza), the system atObsession is by far the most impressive yet. The main room features astunning eight Tannoy VQ 60s - full range, three-way loudspeakers offeringvery high output capability with class leading pattern control. With lowfrequency extension to 90 Hz, the VQ 60 can be combined with varioussubwoofers for extended bandwidth and in the case of Obsession, eightTannoy VS 218DR were placed around the room. Each VS 218DRsubwoofers comprise twin 458 mm (18”) high efficiency drive units producing106 dB (1W), with a 100 mm (4”) voice coil. Even the DJ booth has a highquality sound in the form of two Tannoy IQ10s.

Ranked as one of the largest on-campus arenas in Northern California, theARC Pavilion is an integral part of campus life for UC Davis’students, andhosts basketball games and other sporting events, as well the school’sannual commencement ceremonies. But although the roughly 8000-capacity facility was plenty big enough for any event UC Davis held in it, thesound provided by its pre-existing audio system wasn’t.

Where the previous rig relied heavily on a central cluster of speakers, anewly installed Tannoy VQ system is distributed throughout the entire venuein a series of twelve clusters: Four distributed equally along each of thelonger east and west sides of the arena – one Tannoy VQ DF apiece in thetwo inner clusters and one VQ DF and two VQ MB’s at each corner –Identical coverage of the north and south bleachers was provided by twomore VQ DF’s, one mounted above each end of the court, with additionalsound reinforcement for the players – and for events in which only the floorof the arena is seated – provided by way of two Tannoy V12 HP’s setmidway between the inner and outer east/west clusters along the court’scentre line. The ability to control and mute individual zones enhancesintelligibility further, particularly during events where only a portion of thevenue is in play. “Intelligibility goes way up because you’re not bouncing allthat extra sound around.”, explained Ian Hunter of AV design firm ShalleckCollaborative Inc., describing the Tannoy VQ’s pattern control as “amazing”.

Stadium sound quality for Californian University sports arena

Project: ARC Pavilion

Location: University of California Davis Campus

Type: Sports arena

Project: Obsession

Location: Cluj-Napoca, RomaniaType: High energy dance club


013

Applications

sity sports arena

Star performance from VQ Series

The Pavilion, one of Glasgow’s oldest and best loved variety theatre venues, has recently overhauled its FOH system with a pair of Tannoy VQ 100 full-range loudspeakers. The new VQ 100s add a new level of clarity, definition and presence to the performances within the historic1449-seat auditorium and have gone down well with both cast and audiences since they were installed during the summer season.

A single VQ 100 can produce more power and clarity over its 100 degreebeamwidth area than many arrayed solutions using multiple cabinets,thanks to Tannoy’s latest Dual Concentric driver technology, patented PointSource Waveguide and innovative horn design that are the hallmarks of VQSeries. The class-leading performance characteristics meant that two full-range enclosures were all that was required, minimising the aestheticimpact not to mention the installation cost. General Manager,Iain Gordon,has spent long enough in the industry to have a keen sense of venueacoustics and knows a good system when he hears it. Clearly impressedwith the new install he commented, Tannoy’s VQ Series sounds better thananything I’ve heard in over 30 years of working in the theatre business. Thenew system really gives our performers a whole new level of presence inour shows and projects truly natural sound across the whole audience.”

Just as All Saints Chapel is the heart of spiritual life at this prestigiousDallas area school, the Chapel’s dual manual, twenty seven-stop organ– designed specifically for the school by organ-master, Fritz Noack – isthe heart of the chapel. Intentionally designed to have a long, smoothreverberation time, the Chapel favours sonic sources like theirmagnificent organ and ensemble vocals, but when it comes to speech,small musical ensembles or program music, its stark Greek design andvertical concrete walls become a liability. Happily for the school,Tannoy’s QFlex line of digitally steerable, multi-channel, array speakersare also purpose built; not only to provide a total audio solution forextremely difficult acoustic environments, but to do so with a degree ofelegance that makes them an ideal solution for The Episcopal School ofDallas’ specific needs.

Since the Tannoy QFlex rig went in this past Spring, explains MatthewNoack, Director of Real Estate at the school, a torrent of complaintsfielded by the School’s Founder, Father Swan, have become asteady stream of compliments. “It’s a huge change, he says.“Before, people could not understand the sermon if they were inthe back of the chapel. This has brought back the spoken word asa very clear component to our worship.”

Delivering a clear and concise sermon with QFlex

Project: Episcopal School of Dallasʼs All Saints ChapelLocation: Dallas, USA.Type: House of Worship

Project: The Pavilion

Location: Glasgow, Scotland

Type: Performance Theatre


015

In Ceiling / In Wall

Tannoy has long been associated withpremium quality ceiling speakers, having beenspecified into a vast number of prestigiousinstallations worldwide. The latest productsincorporate new developments in acoustic andmechanical engineering to create a classleading range of ceiling speakers to fit allapplication requirements, while still setting thestandard for audio performance at every level.

• Unique Tannoy drive unit technologies deliver point source constant directivity performance

• Blind mount (including back can) or pre-install (back can supplied as an option) configurations

• Seperate back can available for PI models• Quick and easy self aligning clamping

mechanism• Supplied with C ring and tile bridge • Essential approval certification

The full line up of ceiling speakers offeredsatisfies an exceptionally broad range ofapplications. High quality, unobtrusive soundsystems for commercial installations such asshopping malls, airports, hotels, leisurefacilities, cruise ships, pubs, clubs,boardrooms, right through to residentialcustom installations for multi room systems orhome theatre.

EASE Address

EASE Address is a unique design verificationsoftware package that enables system designersto accurately position, model and confirm ceilingdistributed speaker systemsutilising Tannoy loudspeakerproducts. Unlike conventional2D ceiling speaker software,EASE Address allows for complex room shapes withvarying ceiling heights

*see page 021 for information on EASE Address


Tech Brief CVS 4 CVS 6 CVS 4 Micro CVS 8100 mm (4”) Coaxial 150 mm (6”) Coaxial 100 mm (4”) Coaxial 200 mm (8”) Coaxial102 degrees 93 degrees 102 degrees 90 degrees conical77 Hz - 22 kHz 60 Hz - 24 kHz 90 Hz - 22 kHz 60 Hz – 24 Hz87 dB (2.45 V @ 6 ohms) 91 dB (2.45 V @ 6 ohms) 87 dB (2.45 V @ 6 ohms) 93 dB (2.45 V @ 6 ohms)103 dB (average) 109 dB (peak) 109 dB (average) 115 dB (peak) 109 dB (average) 115 dB (peak) 111 dB (average) 117 dB (peak)80 W 120 W 80 W 120W 2.60 kg 4.75 kg 2.60 kg 5.3kg213 mm x 202.5 mm 279.5 mm x 246.5 mm 213 mm x 98.3 mm 355.6 mm x 251 mm(8.4” x 9.8”) (11” x 9.7”) ( 8.4” x 3.9”) (14.00” x 9.88”)

CVS is supplied with an integral zinc-plated steel back can, with recessed termination box, the removable locking connector has screwterminals for secure wire termination and "loop through" facility. Strain relief is provided by a clamping mechanism for use with plenum ratedcable or conduit. Security toggle clamps make for quick and easy installation, while two tile support rails and one C-ring are also included inthe package. A plaster (mud) ring is available as an optional accessory. The CVS models are equipped with a low insertion loss linetransformer with a front baffle mounted rotary tapping switch.

Suited to high-level music and speech reinforcement applications requiring exceptional sonic quality with uncompromised reliability, the CMS 401 is specifically designed for fast, simple and cost effective installation in new and existing buildings. The driver pod unit can beentirely angled towards the listener within the fixed ceiling mounting ring; the challenge of difficult speaker placement, in less than perfectroom configurations, is therefore eliminated by being able to discreetly pivot the loudspeaker towards the desired area of coverage.

Model options for CMS 501 / 601 / 801CMS BM (Blind Mount) - supplied with an integral back can. CMS PI (Pre-Install) - supplied without a back can, optional transformeravailable. CMS PI back can (Pre-wire back can) - for use with the CMS PI models.

Tech Brief 401 e 401 dce 501 501 dc

016

The Tannoy CVS is a fullbandwidth ceiling speaker system comprising of a midbass driver with a coaxiallymounted high frequency section in a vented, injectionmoulded, paintable front bafflemanufactured from UV/weatherresistant UL94V-0 ABS material.

CVS Series

CMS Series

CMS speakers are full bandwidth; high power and high sensitivity ceilingmonitor systems,comprising either anICT or Dual Concentric point sourcetransducer. Mounted in a vented,injection moulded, paintable frontbaffle manufactured from UV/weatherresistant UL94V-0 ABS material, the configuration of these driver’s mid-bass and tweeter sectionsensures a wide and controlleddispersion for optimum coverage.

Driver Complement DispersionFreq Range (-10 dB) Sensitivity (1 W @ 1 m)Rated Max SPLRec. Amp Power WeightDimensions (Dia x Depth)

Driver Complement DispersionFreq Range (-10 dB)Sensitivity (1 W @ 1 m)Rated Max SPLRec. Amp Power WeightDimensions (HxWxD)

Overview

Description

Overview

Description

100 mm (4”) ICT 100 mm (4”) Dual Concentric 130 mm (5”) ICT 130 mm (5”) Dual Concentric120 deg 123 deg 105 deg 109 deg80 Hz – 24 kHz 80 Hz – 54 kHz 74 Hz – 24 kHz (inc back can) 70 Hz – 54k Hz (inc back can)88 dB (2.83 V @ 6 ohms) 88 dB (2.83 V @ 8 ohms) 89 dB (2.83 V @ 6 ohms) 89 dB (2.83 V @ 8 ohms)105 dB (average) 111dB (peak) 106 dB (average) 112 dB (peak) 106 dB (average) 112 dB (peak) 107 dB (average) 113 dB (peak)100 W 120 W 100 W 120 W3.05 kg 2.73 kg 3.6 kg 3.9 kg205 mm x 147.6 mm 205 mm x 147.6 mm 210 mm x 189.5 mm 210 mm x 189.5 mm (8” x 5.8”) (8” x 5.8”) (8.3” x 7.5”) (8.3” x 7.5”)


165 mm (6.5” ) ICT 165 mm (6.5”) Dual Concentric 200 mm (8”) Dual Concentric 305 mm (12”) Dual Concentric92 deg 111 deg 100 deg 90 degrees 51 Hz - 2 4 kHz 50 Hz - 30 kHz 41 Hz - 35 kHz 42 Hz - 20 kHz91 dB (2.45 V @ 6 ohms) 91 dB (2.83 V @ 8 ohms) 92 dB (2.83 V @ 8 ohms) 92 dB (2.45 V @ 6 ohms)108 dB (average) 112 dB (peak) 110 dB (average) 116 dB (peak) 112 dB (average) 118 dB (peak) 112 dB (average) 118 dB (peak)120 W 160 W 180 W 200 W 6.5 kg 7.45 kg 6.5 kg 6.3 kg280 mm x 258 mm 280 mm x 258 mm 325 mm x 310.5 mm 325 mm x 310.5 mm (11” x 10.2”) (11” x 10.2”) (12.8” x 12.2”) (12.8” x 12.2”)

These compact units are specifically designed for applications requiring the combination of premium sonic quality for music and speech reinforcement andexceptional reliability. The CMS series is equipped with a low insertion loss line transformer easily configurable via front baffle mounted rotary tapping switch.

Blind mount and pre-install versions of the CMS 601 and 801 models are available, as well as a separate back can to satisfy the vast majority of installation application requirements. Spring loaded self-aligning clamps make for quick and easy installation, while all models are also supplied with two tile support rails and one C-ring included in the package. A plaster (mud) ring is available as an optional accessory.

LF reinforcement in a discrete in-ceiling system format is provided in the shape of CMS 801sub - for added versatility in system design.

Tech Brief 601 601 DC 801 DC 801 Sub

CMS Series

As with the 100 mm (4.00”) and130 mm (5.00”) models, the CMS 601, 601DC and 801DC are mounted in a vented, injectionmoulded, paintable front bafflemanufactured from UV/weatherresistant UL94V-0 ABS material.

Description

DescriptionThe CMS 1201DC is a powerful state-of-the-art large format in-ceiling loudspeaker device conceived, designed and built to complement Tannoy’s existing class-leading CMS series . From the pioneers of point source and large format ceiling speakers the CMS 1201DC is engineered from theground up with superior full-range performance in mind to handle demanding distributed sound applications such as ballrooms, shopping malls, sports halls, airports and other high ceiling installations.

Each device comprises of 3 discrete components: the loudspeaker assembly (mounted on ported steel baffle), a separate 79 litre (2.8 cubic feet) steelback-can with multiple mounting points and a white powder-coated steel grille and moulded bevel cover.

Tech Brief 1201 DC300 mm (12”) Dual Concentric90 degrees conical45 Hz - 30 kHz99 dB (12.83 V for 8 ohms)122 dB (average) 128 dB (peak) 400 W TBA331 mm x 725 mm x 516 mm (13.0” x 28.5” x 20.3”)

017

Driver Complement Dispersion Freq Range (-10 dB)Sensitivity (1 W @ 1 m)Rated Max SPLRec. Amp Power WeightDimensions (HxWxD)


Overview


CVS Hardware

CVS 4

CVS 6

CVS 4 MICRO

CVS 8

C-RING AND TILE BRIDGE PLASTER (MUD) RINGCVS SERIES

SUPPLIED ACCESSORIES OPTIONAL ACCESSORIES

CMS Hardware

NOTE: Transformers are available as optional accessories for CMS PI models for the occasionswhere a back can is not to be used in an installation.

CMS 401e

CMS 401DC e

CMS 501PI

CMS 501BM

CMS 501DC PI

CMS 501DC BM

CMS 601PI

CMS 601BM

CMS 601DC PI

CMS 601DC BM

CMS 801DC PI

CMS 801DC BM

CMS 801sub PI

CMS 801sub BM

CMS 12TDC

C-RING AND TILE BRIDGE BACK CANPLASTER (MUD) RINGCMS SERIES

018

OPTIONAL ACCESSORIESSUPPLIED ACCESSORIES


DescriptionThe robust driver construction provides high power handling and the very wide bandwidth, ensuring exceptional intelligibility for music or speech with asmooth, uniform frequency response over a wide area of coverage. Based around a rigid moulded ABS baffle, with excellent structural integrity, the ic6 DC uses an ultra-secure, polycarbonate, three-clamp, self-aligning mounting system to ensure a performance enhancing rigid acoustic couplingwith the ceiling surface.

A metal ‘C-ring’ is supplied as standard to enable a very high degree of integrity when fixing to various ceiling materials. An optional shallow back can isavailable to allow fitting in areas with restricted space whilst also ensuring optimum acoustic performance. The perforated metal grille and low profilemounting frame of the iC6 DC can be painted to blend in seamlessly with any type of décor.

165 mm (6.5”) Dual Concentric90 degrees36 Hz - 36k Hz91 dB (2.83 V @ 6 ohms)113 (average), 119 (peak)20-150 W 3 kg270 mm x 99 mm (10.6” x 3.9”)

Tech Brief iC6 DC

The iC6 DC is a premium quality;compact and low profile ceiling monitorsystem based around a 165 mm (6.50”)point source, constant directivity DualConcentric transducer. Combining along throw, multi fibre, paper pulp basscone, the reference quality studiomonitor driver also delivers extendedbandwidth with its high frequencysection that utilises a 25-micron titaniumdome and neodymium magnet system.

DescriptionOCV Series pendant loudspeakers deliver the renowned acoustic performance and exceptional value of Tannoy’s CVS Series in-ceiling products in anarchitecturally sensitive, self-contained, lightweight cylindrical enclosure. Engineered specifically for applications where consistent and high quality audiocoverage is required in high or open-ceilinged spaces – such as transport terminus, shopping malls or large double or triple height commercial floors –without compromising clarity, intelligibility and SPL.

Conceived and engineered tomeet the exacting demands ofthe architectural sector, minimisingthe impact on aesthetics andallowing the systems designer tolocate the loudspeakers discretely,at a desired height without regard tothe physical ceiling height, and in amanner that won’t conflict withother suspendedsystems such aslightingVfixtures and ventilation..

iC6 DC

C-RINGiC SERIES

ACCESSORIES SUPPLIED

BACK CAN BACK CAN / TRANSFORMER

OPTIONAL

iC Series

OCV Series

Tech Brief OVC 6 OCV 8

019

Driver Complement DispersionFreq Range (-6 dB) Sensitivity (1 W @ 1 m)Rated Max SPLRec. Amp Power WeightDimensions (HxWxD)


Overview

Overview

150 mm (6.00") midd bas driver 200 mm (8.00”) mid bass driver90 deg conical 80 deg conical 60 Hz – 30 Hz 50 Hz – 30 Hz88 dB 90 dB105 dB (average). 111 dB (peak) 108 dB (average). 114 dB (peak120 W @ 16 ohms 140 W @ 16 ohms5.9 kg 7.8 kgBezel diametre - 260 mm (10.23”) Bezel diametre - 302 mm (10.23”)Overall Length - 423 mm (16.66”) Overall Length - 492.5 mm (16.66”)


Ceiling Subwoofers

The CMS 110TB features a resonance decoupling system and additionally each corner of the cabinet is fitted with a seismic tether point. The fourcorner flying points allow the unit to be flown in free space via a 3/8” threaded rod, a chain or aircraft cable. Fire rating is NFP-A Grade A.

Incorporating a 200 mm x 250 mm (8.00” x 10.00”) input module located on the side of the cabinet, ensuring that controls are easily accessed by liftingthe adjacent ceiling tile. The CMS 110TB can be ordered with a passive input module (110 TB-P) connected via barrier strip, or with a passive internalcrossover (CMS 110TB-PX). Both passive modules can be powered by a THP 60 Watt / 70 Volt line transformer for distributed systems (CMS 110TB-P70V and CMS 110TB-PX70V).

The CMS 110TB Tile Bridge ceiling subwoofer is a 250 mm(10.00”) drive unit in a compactdown-firing, vented cabinet capable of 31 Hz @ -3 dB (26 Hz@ -10dB). Easy to install and withno special construction requirements, the CMS 110TBdrops into a 2’ x 2’ ceiling tilespace; integrating invisibly intothe installation environment byusing a standard air conditioningvent cover as a speaker grille.

A compact, down-firing, ventedceiling subwoofer cabinet with250 mm (10.00”) long throwdriver capable of 31 Hz @ -3 dB(26 Hz @ -10 dB). The CMS110SR Sheet Rock subwoofer flushmounts into sheet rock ceilings,walls, or overhangs - any positionoffering adequate clearance andsuitable structural support. Theunit comes complete with a low profile square grille.

The CMS 110SR cabinet is fitted with seismic tether points and comes with a sturdy pre-installation ring (CMS 110SR-Ring) for safe and secure installation ofthe unit. (The pre-installation ring is available separately for new construction where the sheet rock installers arrive before the contractor.) Fire rating for the 110SR is NFPA Grade A.

The CMS 110SR incorporates a 200 mm x 250 mm (8.00” x 10.00”) input module located on the side of the cabinet. The input module controls are easilyaccessed by removing the grille and the unit remains serviceable and fully removeable from below after installation. The CMS 110SR can be ordered with apassive input module (CMS 110SR-P) connected via barrier strip, or with a passive internal crossover (CMS 110SR-PX). Both passive modules can bepowered by a THP 60 Watt / 70 Volt line transformer for distributed systems (CMS 110SR-P70V and CMS 110SR-PX 70V).

Description

250 mm (10”) direct radiating sub 250 mm (10”) direct radiating sub 250 mm (10”) direct radiating sub- - -26 Hz – 150Hz 26 Hz – 150 Hz 26 Hz – 150 Hz- - -105 dB (average) 111 dB (peak) 105 dB (average) 111 dB (peak) 105 dB (average) 111 dB (peak)110 W 110 W 110 W15.4 kg 15.4 kg 15.4 kg318 mm x 483 mm x 483 mm 318 mm x 483 mm x 483 mm 318 mm x 483 mm x 483 mm(12.4” x 19” x 19”) (12.4” x 19” x 19”) (12.4” x19” x 19”)

020

Driver Complement DispersionFreq Range (-10 dB)Sensitivity (1 W @1 m)Rated Max SPLRec. Amp Power WeightDimensions (HxWxD)

Tech Brief CMS 110TB-P CMS 110TB-PX CMS 110TB-A250 mm (10”) direct radiating sub 250 mm (10”) direct radiating sub 250 mm (10”) direct radiating sub- - -26 Hz – 15 0Hz 26 Hz – 150 Hz 26 Hz – 150 Hz- - -105 dB (average) 111 dB (peak) 105 dB (average) 111 dB (peak) 105 dB (average) 111dB (peak)110 W 110 W 110 W18.1 kg 18.1 kg 18.1 kg251 mm x 598 mm x 598 mm 251 mm x 598 mm x 598 mm 251 mm x 598 mm x 598 mm (9.8” x 23.5” x 23.5”) (9.8” x 23.5” x 23.5”) (9.8” x 23.5” x 23.5”)


Tech Brief CMS 110SR-P CMS 110SR-PX CMS 110SR-A

Overview

Description

Overview


021

EASE Address

EASE Address is the unique design verification software package that enables systemdesigners to accurately position, model and confirm ceiling distributed speaker systemsutilising Tannoy loudspeaker products. Unlike conventional 2D ceiling speaker software, EASEAddress allows for complex room shapes with varying ceiling heights. EASE Address modelsthe direct sound output of distributed systems in two dimensions, using the acousticalcalculation engine behind EASE (Enhanced Acoustic Simulator for Engineers); the industrystandard for sound reinforcement modelling.

The purpose of EASE Address is to provide both the end user, who needs to quickly develop asimple design for a ceiling loudspeaker system, as well as the sound designer, with a tool thatallows the easy and quick prediction of the system performance in a given space. Thefunctionality of EASE Address has been developed from EASE, the professional electro androom acoustic simulation software developed by ADA (Acoustic Design Ahnert) Berlin,Germany.

Designing distributed systems using Tannoy loudspeakersEach Tannoy ceiling product is included in the programmes file library as GLL system definitionfiles (.GLL). These files are created by means of the EASE SpeakerLab software and containthe data that defines a loudspeaker with regard to its geometrical and acoustical properties.Tannoy loudspeakers are independently measured at NWAA Labs, CA.

FeaturesConstant-Voltage networks like 70 V and 100 V, including tap settings and power sum calculationNoise level entry and S/N mappingImport and export of EASE project filesNew auto-arrange option for SPL variation over the gridMapping can be saved (after completed) along with the projectCreate print version now supports RTF and PDFCursors can be used to show level values in mapping, also relatively to the reference cursorAll graphs can be copied to the clipboard or file (use File menu or RMB)Allows copying floor/ceiling images from existing room to new roomEnglish and German program version and help files

UL Listed Tannoy Loudspeakers

Tannoy offers a number of loudspeaker products which have been designed and engineeredto meet or exceed the exacting standards for safety required for UL Listed certification, specifically with regards to those standards relevant to commercial loudspeaker installation (UL 1480, UL-2043). These strictly controlled UL Listed marks are a certification of theproduct’s ability to perform safely and to specification in relation to fire safety and installationin air-handling spaces and give the contractor confidence and assurance of delivering a system that meets specific local regulations in North America.

All products that are UL Listed and meet the UL-1480 and UL-2043 standards at time of pressare denoted with the UL LISTED logo.

Underwriters Laboratories® is an independent product safety certification organization thathas been testing products and writing standards for safety for more than a century. UL evaluates more than 19,000 types of products, components, materials and systems annuallywith 20 billion UL Marks appearing on 72,000 manufacturers' products each year. The ULMark on a product means that UL has tested and evaluated representative samples of thatproduct and determined that they meet UL requirements. Under a variety of programs products are periodically checked by UL at the manufacturing facility to make sure they continue to meet UL requirements.

EASE Address

UL Listed


With a continuous power output rated at 200 W RMS, this in wall subwoofer is capable of delivering impressive results in large residential andcommercial applications; such as small entertainment venues, restaurants, bars, public buildings, board rooms and business music systems.

Complementing any style of decor, the perforated metal grille and discreet moulded ABS baffle panel frame of all the in walls can be painted toblend in seamlessly with any environment.

Tech Brief iw 4DC iw 6DS iw 6TDC iw 62TDC

The compact iw 4DC uses the 100 mm (4.00”) Dual Concentric, the iw 6TDC a 165 mm (6.50”) version, while the iw 62TDC uses this and an additional 165 mm (6.50”) bass driver. The class leading performance is further enhanced by the inclusion of a self aligning clamp mechanism, allowingfor simple removal or reorientation of the loudspeaker, but crucially also providing the acoustically optimum bond to the wall surface without risk of distortion to the loudspeaker baffle. Gold plated spring loaded terminals are provided for ease of installation.

Built around an immensely strong chassis, the iw 6DS has a main bass and mid-range driver and a WideBand high frequency unit. The DC models all use the Tannoy Dual Concentric point sourcedriver; this with the addition of an additional SuperTweeterextending bandwidth out to over 50 kHz.

iW Series

The iw 62TS is a high performance in wall subwoofer.Designed to augment the low frequency output of the system, it uses the same construction andmechanical installation method,to ensure it is a perfect match,both acoustically and visually, tothe full range units.

Tech Brief iw 62TS2 x 165 mm (6.5”) LF Subwoofer-29 Hz - 110 Hz94d B half space (2.83 V @ 6 ohms)117 (average), 123 (peak)400 W6.5 kg473.5 x 227 x 95.5 mm (18.7” x 8.9” x 3.8”)

100 mm ( 4”) Dual Concentric 165 mm (6.5”) Discrete array 165 mm (6.5”) Dual Concentric 165 mm (6.5”) DC / 165 mm LF130 degrees 90 degrees 90 degrees 90 degrees73 Hz - 54 kHz 44 Hz – 54 kHz 36 Hz – 54 kHz 34 Hz – 54 kHz88 dB (2.83 V @ 6 ohms) 89 dB (2.83 V @ 8 ohms) 91 dB (2.83 V @ 8 ohms) 92 dB (2.83 V @ 8 ohms)106 dB (average) 112 dB (peak) 108 dB (average) 114 dB (peak) 112 dB (average) 118 dB (peak) 117 dB (average) 123 dB (peak)120 W 150 W 180 W 210 W2.60 kg 3.0 kg 3.0 kg 5.0 kg238 mm x 159 mm x 84 mm 320 mm x 209mm x 93mm 473.5 mm x 227 mm x 99 mm 473.5 mm x 227 mm x 95.5 mm (9.4 ”x 6.3” x 3.3”) (12.6” x 8.3” x 3.7”) (18.6” x 8.9” x 3.9”) (18.6” x 8.9” x 3.8”)

022


Driver Complement DispersionFreq Range (-6 dB)Sensitivity (1 W@ 1m)Rated Max SPLRec. Amp Power WeightDimensions (HxWxD)

Overview

Description

Overview

Description


iW Accessories

TOPTOP

TOP

Description With front mounted control of level, phase and a continuously variable crossover, adjustable from 50 Hz – 150 Hz, the iwSA 500 amplifier will offer allthe control needed to optimise the subwoofer integration with the mid / high units, regardless of the installation positions.

Two unbalanced RCA audio input’s and four gold plated binding post outputs, crossover bypass switch, limiter function switch for one or two subconfigurations and sleep mode defeat switch are all incorporated. The 2U iwSA 500 casing mounts directly into a standard EIA 19” rack or thebrackets can be removed for shelf location with no ventilation issues.

The iw SA500 is a single channelBASH© power amplifierspecifically designed to deliver500 Watts (max) of optimallymatched power to the Tannoyiw 62TS in wall subwoofer todeliver impressive results indomestic or commercialinstallations; this in applicationssuch as small venues,restaurants, bars, public buildingsand business music systems.

Available in North America Only iW Subwoofer Amplifier

Type in wall subwoofer amplifier

Rated power output 500 W continuous into 4 ohms250 W continuous into 8 ohms

Minimum frequency bandwidth 20 Hz – 500 Hz (no filters or EQ)

023

Tech Brief iW SA500

iW SERIES STEEL BACK CAN (complete) PRE-INSTALL MOUNTING RING

OPTIONAL ACCESSORIES

Overview

iw4 DC

iw6 DS

iw6 TDC

iw62 TDC

iw62 TS


Definition Install

Designed to be used in left, centre or right locations the DC 6i, DC 8i and DC 12i are capable of explosive dynamics with stunning detail in both musicand movie application in vast array of listening and viewing environments.

The Dual Concentric is effectively two drivers properly merged into one where, unlike ordinary drive units, the high frequency unit is positioned on theback of the low frequency driver. As a result they are on same axis, so ensuring that sound energy is effectively propagated from the same point anddelivered through the centre of the low frequency cone as true point source.

Description

The exceptionally versatile, high power handling iw 60EFX is able to extract the full potential of contemporary multi-channel soundtracks; an in wall surround /effects speaker designed to reproduce the same bandwidth and sound pressure levels as the main speakers.

Capable of an effortless and powerful performance to rival that of the cabinet based models in the range, the iw 63DC is equipped with a 165 mm (6.50”) Dualcoupled with two 165 mm (6.50”) high output woofers.

Both are built in heavily braced and comprehensively damped MDF cabinets that are supplied with a paintable, flush mounting grille designed to blendseamlessly into any architectural space. A mounting frame is available as an optional pre-installation accessory to fit into standard construction 2" x 4" stud walls.

Tech Brief iw 63DC iw 60EFX iw 210s

150 mm (6”) Dual Concentric 200 mm (8”) Dual Concentric 300 mm (12”) Dual Concentric 90 degrees conical 90 degrees conical 90 degrees conical70 Hz - 45 Hz 62 Hz - 45 kHz 50 Hz - 38 kHz90 dB (2.83 V @ 8 ohms) 92 dB (2.83 V @ 8 ohms) 97 dB (2.83 V @ 8 ohms)110 dB (average) 116 dB (peak) 110 dB (average) 116 dB (peak) 120 dB (average) 126 dB (peak)200 W 260 W 400 W7 kg 9.5 kg 20 kg334 mm x 250 mm x 214 mm 394 mm x 294 mm x 215 mm 550 mm x 410 mm x 255 mm(13.2” x 9.8” x 8.4”) (15.5” x 11.6” x 8.5”) (21.7” x 16.1” x 8.9”)

Tech Brief DC 6i DC 8i DC 12i

Description

These speakers are designed tobe hidden within a customdesigned installation; mounted onwall either behind the screen oracoustically transparentdecorative panels with noappreciable loss of performance.The units can be mounted eitherhorizontally or vertically using theintegral keyhole mounts and thesupplied wall plate.


Driver Complement DispersionFreq Range (-10 dB)Sensitivity (1 W @ 1m)Rated Max SPLRec. Amp Power WeightDimensions (HxWxD)

024

Overview

2x165 mm (6.5”) LF / 1x165 mm DC 1x165 mm (6.5”) DC / 2x100 mm DC 1 x 250 mm ( 10”) LF Driver / 1 x 250 mm ( 10”) Passive radiator- - -54 Hz - 40 kHz 74 Hz - 27 kHz 28 Hz - 600 Hz91 dB (2.83 V @ 8 ohms) 90 dB (2.83 V @ 8 ohms) 88 dB (2.83 V @ 8 ohms)111 dB (average) 117 dB (peak) 110 dB (average) 116 dB (peak) 112 dB (average) 118 dB (peak)200 W 200 W 500 W10.50 kg 9.50 kg 9.5 kg590 mm x 345 mm x 94 mm 590 mm x 345 mm x 94 mm 590 mm x 345 mm x 94 mm(23.2” x 13.6” x 3.7”) (23.2” x 13.6” x 3.7”) (23.2” x 13.6” x 3.7”)


CMS RANGE

Direct radiating subwoofer Direct radiating subwoofer90 degrees conical 90 degrees conical38 Hz 36 Hz94 dB (2.83 V @ 6 ohms) 96 dB (2.83 V @ 6 ohms)112 dB (average) 118 dB (peak) 124d B (average) 130 dB (peak)400 W - 800 W 600 W - 1200 W 21 kg 30 kg 435 mm x 370 mm x 355 mm 525 mm x 460 mm x 430 mm(7.1” x 14.6” x 14”) (20.7” x 18.1” x 17”)

The Definition Install DS 12i and DS 15i subs have been designed to underpin a Definition install theatre or media room system with truly remarkablelow frequency performance.

Massively constructed around either 12” or 15” professional drive units, this subwoofer will produce the ultimate soundtrack experience, with spectacular and thunderous bass, yet still be agile enough to maintain finer musical detail with precision and speed.

The DSi subs are compact enough to bring class leading performance to a wide range of installation applications; from media rooms to home theatreand boardrooms through to high end marine interiors.

Tech Brief DS 12i Sub DS 15i Sub

Description

Definition Install

025



027

Architectural

Some of the most demanding loudspeakerapplications require a solution that not onlydelivers superior audio quality, but does so in anunobtrusive and discrete manner. Tannoy haslong recognised the importance of offeringsystems that can satisfy both of theseuncompromising requirements, utilising bothtechnological and aesthetic innovations toensure a solution that performs beyondexpectation without impacting on thearchitectural style of a space.

Tannoy’s Architectural product ranges offer the system’s designer a wide choice ofloudspeakers to suit any situation, at any scaleand almost any budget. Whether it’s the award-winning QFlex series, using cutting-edgedigital beam steering technology, allowing forprecise control of audio coverage in highlyreverberant spaces such as cathedrals andairports without the need for large numbers ofunsightly delay speakers, or whether itssomething as simple as the new DVS Series -designed specifically for cost-sensitiveapplications where stylish aesthetic and highquality sound are still prerequisites.


Description

Description

110 mm (4.5”) ICT 165 mm (6.5”) ICT90 degrees 90 degrees80 Hz - 30 kHz 55 Hz - 24 kHz88 dB (2.45 V @ 6 ohms) 90 dB (2.45 V @ 6 ohms)105 dB (average) 111 dB (peak) 107 dB (average) 113 dB (peak)100 W 120 W 2.7 kg 5.0 kg240.7 mm x 155 mm x 162 mm 357.5 mm x 230 mm x 223.2 mm(9.5” x 6.1” x 6.4”) (14.1” x 9.1” x 8.8”)

As a constant directivity drive unit, the point source ICT (Inductive Coupling Technology) enables mounting of the loud speaker in either vertical orhorizontal orientations on the wall or ceiling with no compromise to performance. The ICT driver also addresses the two most common componentfailures experienced in background music and sound reinforcement systems; the tweeter and the crossover reliability. The use of a wirelesselectromagnetic tweeter in the ICT design means that no crossover is required; ensuring that the HF unit is exceptionally robust and reliable. The mineral loaded polypropylene cone material and nitrile rubber surround further enhance long-term durability.

The high impact polystyrene (HIPS) enclosure of all the Di series passive models is rated weather resistant as IP64 to EN60529 (IEC529).

Tannoy’s Dual Concentric provides extraordinary power handling, high sensitivity, extended frequency response and very low distortion, with a wide andcontrolled dispersion ensuring optimum coverage. By placing the high frequency drive unit physically inside the low frequency driver, a true point sourceis created that exhibits constant directivity and unparalleled linearity. Perfect for surface mount applications, the driver system generates a sphericalwave front unaffected by energy loss at the crossover frequency in either vertical or horizontal planes; allowing highly flexible speaker placement on thewall or ceiling with no compromise to performance and vocal intelligibility.

For 70 V or 100 V distributed sound applications all passive models are available in versions equipped with an internally mounted low insertion loss linetransformer, with easily configurable wattage taps via an easily accessible rotary tapping switch.

Durable and scuff resistant textured black or white paintedfinish, with matching rubber trims,all models are full bandwidthweather resistant loudspeakersdesigned for commercial, professional and residential applications where environmentdurability and high quality sonicperformance are required.

Designed for a wide variety ofsound reinforcement applications,the Tannoy Di Series is a range ofpremium performance, ultracompact surface mount weatherresistant loudspeakers. Tannoy’sexclusive point source, constantdirectivity drive unit technologiesin Di deliver outstanding clarity,definition and detail with classleading vocal intelligibility.

028



Tech Brief D i5 / Di 5t Di 6 / Di 6t

Tech Brief Di 5DC / Di 5DCt Di 6DC / Di 6DCt Di 8DC / Di 8DCt

Overview

Overview

110 mm (4.5”) Dual Concentric 165 mm (6.5”) Dual Concentric 200 mm (8”) Dual Concentric90 degrees 90 degrees 90 degrees80 Hz – 54 kHz 55 Hz – 35 kHz 53 Hz – 35 kHz 88 dB (2.8 3V @ 8 ohms) 89 dB (2.83 V @ 8 ohms) 91 dB (2.83 V @ 8 ohms)106 dB (average) 112 dB (peak) 107 dB (average) 115 dB (peak) 111 dB (average) 117 dB (peak)120 W 180 W 180 W2.7 kg 5.5 kg 7.0 kg 240.7 mm x 155 mm x 162 mm 357.5 mm x 230 mm x 223.2 mm 404.3 mm x 260 mm x 260.3 mm(9.5” x 6.1” x 6.4”) (14.1” x 9.1” x 8.8”) (15.9” x 10.2” x 10.2”)

Di Series - Weatherised


A recess on the rear of the enclosure contains the Euroblock type connector socket which completes the signal path when the speaker is offered up tothe bracket and pushed into place. The speaker may then be swivelled into the desired angle for optimum coverage before tightening the locking collar.A secondary support line can be secured to the tie back point and the rubber weather-sealing boot located.

This innovative bracket is available in black or white as an optional accessory for all the Di passive models.

Description The K-Ball Multi-angle Bracket

Designed to facilitate pre-wiringof the system, the K-Ball™carries a wiring loom through thearm of the bracket to a Euroblocktype connector plug located inthe ball. When mounted inconjunction with a standardconduit junction box (J-box) the assembly is thenready to receive the speakerduring the commissioning stageof the install.

Di Hardware

110 mm (4.5”) ICT90 degrees conical90 Hz - 30 kHz88 dB103 dB (average) 109 dB (peak)30 W RMS2.40 kg 240.7 mm x 155 mm x 162 mm(9.5” x 6.1” x 6.4”)

In common with the passive Di models, the Di 5a is available in black or white, with additional colour trims as optional accessories, ensuring effectivedecor matching in most installations. Utilisation of the point source loudspeaker allows the Di 5a to be mounted on a wall or ceiling in either horizontalor vertical orientations without affecting its performance.

A range of hardware options ensures simple and effective installation in stereo or monaural background or foreground music systems in applications asdiverse as theme parks, retail premises, restaurants and cafés, corporate audio visual and houses of worship. For installs requiring extended lowfrequency enhancement, a range of Tannoy sub-bass systems are available and can be used in conjunction with the Di 5a.

Di Series

With a rated output of 30 WRMS, the Di 5a is an ultracompact active loudspeakersystem capable of delivering high sound pressure levels withextremely low distortion, resultingin outstanding clarity, definitionand detail. Designed for a widevariety of sound reinforcementapplications, the Di5a deliversoutstanding performancecombined and durability.

Tech Brief Di 5a

029

Driver Complement DispersionFreq Range (-10 dB)Sensitivity (1 W @ 1 m)Rated Max SPLPower RatingWeightDimensions (HxWxD)

*Power supply is EU/US compliant

Overview

Description

Overview


Arena Highline Series

Description

Tech Brief 300c 500c

They can be used as left, right and centre around the screen, while low frequency reinforcement can be provided using the Tannoy V Series VS 10BPsubwoofer in conjunction with the TDX1 electronic system controller. Tannoy DMT (Differential Material Technology) is extensively used in the extra thickwalled aluminium cabinet extrusion to minimise any cabinet resonance. Arena HighLine is supplied with flush mounting hardware as standard.

Arena HighLine has been designedprimarily as a low profile, full rangeloudspeaker for use in conjunctionwith Plasma or LCD flat screentechnologies. The bracket systemand cable management ensure aclose to wall mounting and a visualeffect that blends with the décor;important in high style installationssuch as lounges, bars, hotels,boardrooms, houses of worship andretail premises.

Di Accessories

Di5a

Di5 / Di5t

Di5 DC / Di5 DCt

Di6 / Di6t

Di6 DC / Di6 DCt

Di8 DC / Di8 DCt

YOKE BRACKET POLEMOUNTK-BALLTMDi SERIES

SUPPLIED ACCESSORIES OPTIONAL ACCESSORIES

The Yoke bracket is supplied asstandard with all models.

The K-Ball is suitable for use withall passive models.

The Polemount adaptor may beused with either the Yoke or K-Ball braclkets.

300C

500C

WALL BRACKETSHIGHLINE SERIES

ACCESSORIES SUPPLIED

FLOOR STAND

OPTIONAL

Driver Complement DispersionFreq Range (-10 dB)Sensitivity (1 W @1 m)Rated Max SPLRec. Amp Power WeightDimensions (HxWxD)

030

Overview

Overview

4x75 mm (3”) LF/MF, 1x19 mm (0.75”) HF 1x100 mm (4”) DC, 1x100 mm (4”) LF140 x 90 degrees 120 x 90 degrees69 Hz – 62 kHz 83 Hz – 54 kHz85 dB (2.83 V @ 8 ohms) 88.5 dB (2.83 V @ 8 ohms103 (average), 109 (peak) 107 (average), 113 (peak)120 W 150 W 5 kg 6.5 kg109 mm x 590 mm x 101 mm 149 mm x 593 mm x 124 mm(4.3” x 23.2’ x 4”) (5.7” x 23.3” x 4.9”)


Tech Brief Single driver satellite Twin driver satellite 100 mm (4.5”) Dual Concentric 1 x100 mm (4.5”) DC / 1 x100 mm (4.5”) Bass driver120 degrees 90 x 120 degrees

- - -83 dB (2.83 V @ 8 ohms) 85 dB (2.83 V @ 8 ohms)101 (average), 107 (peak) 104 (average), 110(peak)120 W 150 W2.5 kg 4.0 kg187 mm x 133.5 mm x 175.5 mm 133 mm x 245 mm x 149 mm(7.4” x 5.3” x 6.9”) (5.2” x 9.6” x 5.9”)

Available in black, the Arena system comprises two satellite speaker options which can be configured in various multiple speaker options, partneredwith other sub woofers and system controllers. Arena satellite option has a single 5” Dual Concentric driver. The twin driver option has been equippedwith a supplementary bass driver to augment power handling. The rigid acoustic shell, robustly constructed in cast aluminium, provides full acousticoptimisation of the drive units. Both models are magnetically shielded to eliminate colour fringing effects when placed close to a television.

Description

Designed to fit exactly to theshape of the satellite units, thereare two bracket options available– one for the single driver unit andone for the twin. Available inblack to match the speakers,they form an elegant installsolution.

For installation requirements that demand a strong design statement,Arena’s contemporary looks blend form and function superbly, this beautifully crafted design offers much more than elegant styling. Ideally suited to fashionable hotel receptions, stylish restaurants or bars, luxurious boardrooms or chiccafés, the exceptional acoustic performance combines with application flexibility to deliver a system that defines the category.

Arena Hardware

Arena Series

SINGLE DRIVER SATELLITE

ARENA

ACCESSORIES

WALL / TABLE MOUNT BRACKET

OPTIONAL

TWIN DRIVER SATELLITE

Single driver satellite bracket Twin driver satellite bracket

Versatile mounting platforms that enable a variety of room integration solution, the table / counter top stands for both of the satellite speaker optionsare fitted with a swivel mechanism allowing precise adjustment. The same stands are also equipped with a wall mounting plate and a carefullydesigned cable management system and finished in colours to match the product.

031


Overview

Description

Overview


All elements of QFlex products are constantly monitored and logged.Fault conditions can be reported in various ways -

Via the built in onboard failure relay Via the VNet network on software Sentinel SM1 System Monitor

Sentinel SM1 system monitorThe optional standalone Sentinel SM1 System Monitor provides complete system-wide fault monitoring and reporting for mis-sion-critical applications. Built on a tried and trusted processing ‘engine’, Sentinel keeps a watchful eye on the audio systemand, if required, any controlling PCs. Problems are reported via relay contacts to the main monitoring panel in your system aswell as being shown on Sentinel’s front panel display. Multiple Sentinels can even monitor each other and the same network si-multaneously for systems that require dual redundant monitoring.

QFlex

Extensive Diagnostics

Ease of use

There are no complex menus or software applications to navigate with the SM1. In most cases, you simply connect the SM1 to your network of VNet devices, and it immediately starts to provide the monitoring your system requires.

If your system demands something slightly more elaborate,such as monitoring a PC, then a simple control panel in

the PodWare application allows you to set such things up.

Reliability

Sentinel SM1 has been built on a hardware and softwareplatform which has been field tested for several yearsand proven to be extremely reliable. But, just in case ofany problems, a hardware Watchdog monitors the operation of the software, and will cause the processor

to do a hard reset and restart if any problem is found.

PodWare application

The companion PodWare PC Windows application uses a small panel called a MonIcon to display all important status information at a glance. The full control panel is only one click away from the MonIcon, from which adjustments to all facets of Sentinel’s operation may be made. In most cases

no setup will be required.

Security

SM1’s front panel controls may be disabled via the Secure button on the rear panel of the unit.

032


DescriptionQFlex is quite revolutionary in that it is able to achieve even coverage and SPL which is maintained across the listening plane. QFlex is able to create anasymmetrical pattern which allows similar SPL's both in the near and far field. It is able to steer the beam away from surfaces that cause reflections tofrequencies beyond 12 kHz. This makes QFlex the first digitally steerable array to maintain music quality over the desired area of coverage, all in a veryarchitecturally pleasing package. The intuitive BeamEngine GUI allows the designer to specify target areas. Based on those target areas a steering algorithm is generated and tailored for that specific area, rather than having to choose from a limited palette of opening and steering angles. See opposite page for more details.

8 x 4” LF 8 x 3” LF / 8 x 1” HF 8 x 4” LF / 8 x 3” LF / 8 x 1” HF120 degrees 120 degrees 120 degrees 110 Hz - 4 kHz 130 Hz - 20 kHz 110 Hz - 20 kHz20 m (66 ft) 25 m (82 ft) 40 m (131 ft)92 dB 94 dB 96 dB700 Hz 700 Hz 400 Hz15.2 5 kg 14.25 kg 26.25 kg840 mm x 171.5 mm x 150 mm 744 mm x 171.5 mm x 150 mm 1483 mm x 171.5 mm x 150 mm(33.1” x 6.8” x 5.9”) (29.3” x 6.8” x 5.9”) (58.4” x 6.8” x 5.9”)

Tech Brief QFlex 8 QFlex 16 QFlex 24

Tannoy is proud to introduce QFlex, a range of digitally steerable,multi- channel, array speaker systems for the professional installmarket. QFlex is designed as acomplete solution for applicationswith difficult acoustics, such ashouses of worship, transportationhubs, convention centres, conference facilities, shopping malls, performing arts centres and museums.

DescriptionWhile the basic models of QFlex 8 and QFlex 16 are standalone devices, the larger columns are built from a combination of these modular elementswith a master device at the bottom and slaves above. The choice of model is determined by the specific project’s requirement, but generally speaking,the higher the SPL required and over larger distances, the longer the QFlex array needs to be. The use of larger models also brings improved lowfrequency beam control, ranging from 700 Hz with a single QFlex 16 down to just 200 Hz with the QFlex 48. Unlike competitor’s products,’s modular design rather than single complete assemblies means that the system can be expanded at a later date if required, without having to purchase a whole new array, not to mention making shipping a great deal less complicated. A custom designed mounting bracket is available toallow for easy wall-mounting and pivoting to the desired alignment, ensuring a tidy hassle-free installation and allowing for some flexibility in orientation without de-mounting the product.

OCV Series

Tech Brief QFlex 32 QFlex 40 QFlex 48

033



Overview

16 x 3” LF / 16 x 1” HF 16 x 3” LF / 16 x 1” HF / 8 x 4” LF 16 x 4” LF / 16 x 3” LF / 16 x 1” HF120 degrees 120 degrees 120 degrees 130 Hz - 20 kHz 110 Hz - 20 kHz 110 Hz - 20 kHz50 m (165 ft) 70 m (231 ft) 80 m (263 ft)100 dB 100 dB 101.5 dB400 Hz 250 Hz 200 Hz25.25 kg 38.5 kg 51.5 kg1387 mm x 171.5 mm x 150 mm 2127 mm x 171.5 mm x 150 mm 2967 mm x 171.5 mm x 150 mm(54.6” x 6.8” x 5.9”) (83.7” x 6.8” x 5.9”) (116.8” x 6.8” x 5.9”)

** Based on mounting height of 10 metres and achieving 95 dB SPLat the quoated distance.

QFlex


QFlex

034

What does QFlex do that conventional loudspeakers cannot?When faced with highly reverberant, acoustically challenging spaces, such as houses ofworship or major transportation hubs; the biggest challenge is in designing a system whichwill deliver high direct to reverberant sound ratio. In other words, maximising the sound thatarrives directly at the listener’s ear, while avoiding reflective surfaces. Achieving this withconventional loudspeakers is extremely difficult, especially where there is a specific requirement to minimise architectural or aesthetic impact.

QFlex uses multiple channels of advanced amplification and DSP to produce highly controlled beams of acoustic energy, which are directed on user defined target areas. With this ability to focus acoustical output in target areas, comes better speech intelligibilityin highly reverberant spaces.

Critical Advantages of QFlex. QFlex boasts state-of-the-art beam control, with the ability to steer by +/- 70 degrees at frequencies up to 12 kHz. This means it’s effective for full-range material rather than justbeing restricted to voice only applications. QFlex makes it possible to install a loudspeakersystem in an acoustically difficult environment such as a church, which iscapable of delivering clear and intelligible audio, be it speech or musical performance, without havingto compromise on speaker location. A single QFlex array can be located high above thesight lines of the audience for example, and steer multiple beams of acoustic energy downonto the desired areas.

Features• Extremely intelligible speech and music reinforcement.• Class leading steering control (+/- 70 degrees). • Densely spaced transducers to defeat the effects of aliasing. • Intuitive GUI. • Integrated cutting edge DSP, network control and amplification. • Networkable with other Tannoy VNET products. • Unique digital filter structure for efficient implementation

and low latency. • Uses a powerful Regularized Least-Squares Multichannel In

version algorithm for state-of-the-art beam control. • Architecturally pleasing.

QFlex BeamengineTM SoftwareThe cornerstone of QFlex is in creating the ‘steering files’ used to program thesteering characteristics of a given array. Thankfully, this is made very simply usingthe freely available BeamEngine™ software (available from Tannoy.com). We havedeveloped a highly intuitive GUI which doesn’t require a degree in acoustics to operate, and will achieve accurate and predictable results. BeamEngine is running a complex set of Matlab™ functions based on real measurement data.

QFLEX OFFERS ACOUSTIC DESIGNERS A GENUINEBREAKTHROUGH IN CAPABILITY WHEN IT COMES TO DEALING WITH REVERBERANT SPACES

Beam Steering


i Series

Tall and slim, these loudspeaker cabinets are equipped with direct radiating driver arrays arranged as a column, or line source. Designed for use inacoustically difficult applications where controlled coverage is required, the dispersion characteristics direct sound into the desired space while minimizing reflections from the ceiling. This makes them ideal for high quality music and speech reinforcement in highly reverberant environments ranging from houses of worship to retail environments and airports to conventions centres.

i Series Hardware

Tech Brief i7 i94 x 100 mm (4”) LF / 1 x 25 mm (1”) HF 4 x 130 mm (5”) MF / 3 x 25 mm (1”) HF110 deg x 50 deg (H x V) 120 deg x 40 deg (H x V)86 Hz – 25 kHz 60 Hz – 40 kHz89 dB (2.83 V @ 8 ohms) 93 dB (2.83 V @ 8 ohms)108dB (average) 114dB (peak) 115dB (average) 121dB (peak)180 W 300 W9 kg 12.5 kg572 mm x 135 mm x 173.8 mm 779 mm x 170 mm x 990 x 200 mm(22.5” x 5.3” x 6.8”) (30.7” x 6.7” x 39” x 7.9”)

036

Yoke Multi angle bracketi SERIES

OPTIONAL ACCESSORIES


The Tannoy i Series loudspeakersare slim cabinet columnloudspeakers, designed foracoustically difficult applicationswhere wide yet controlledcoverage is required for highquality music and speechreinforcement. Available incharcoal or white, (silver for i9VP)each consists of direct radiatingLF and titanium HF positioned asa line source.

Description

Overview

i7

i9


DescriptionThe slim two-way design uses two 100 mm (4.00”) LF and 25 mm (1.00”) titanium dome, neodymium magnet system HF units for enhanced efficiencyand extended response; the combination producing a full bandwidth loudspeaker designed for high quality sonic performance with a smooth andcontrolled response for even coverage and optimum forward gain. The black painted finish plywood enclosure has a removable black powder-coated,perforated steel kick-proof grille.

A separate steel back can with multiple conduit knockouts is available as an optional accessory for installation versatility; including use in concrete orwhere a metal enclosure is required.

Dual Concentric120 degrees horizontal 90 degrees vertical67 Hz – 30 kHz88 dB (2.45V @ 6 ohms)109 dB (average) 115 dB (peak)240 W 6.5 kg 432 mm x 146 mm x 258.1 mm(17” x 5.7” x 10.2”)

Tech Brief iS52

Designed for a wide variety ofsound reinforcement applications,fitting neatly into stair risers orstage fronts between 16.00” studs,the is52 In-Stair loudspeaker isengineered for highly intelligiblemusic or speech reproduction inhouses of worship, theatres,auditoriums, etc.

DescriptionDesigned for a wide variety of discrete small and medium scale sound reinforcement applications, the Tannoy DVS is an ultra-compact surface-mountloudspeaker of exceptional value and acoustic performance. A full bandwidth loudspeaker designed for commercial, professional and residential applications where environmental durability and high quality sound reproduction are required. For both indoor and limited outdoor use, these speakersare ideally suited to stereo or monaural background or foreground music systems in such applications as diverse as theme park attractions, retailpremises, restaurants and cafe's, hotel lobbies and bars, corporate audio visual, residential developments and houses of worship.

DVS Series is an ultra-compactsurface-mount loudspeaker ofexceptional value and acousticperformance. A full bandwidthIP64 rated loudspeaker designedfor commercial, professional andresidential applications where environmental durability and highquality sound reproduction arerequired.

DVS Series

Tech Brief DVS 4 DVS 6 DVS 8

037



Overview

Overview

100 mm (4”) Coaxial 165 mm (6.5”) Coaxial 200 mm (8”) Coaxial- 110 deg conical 90 deg conical 80 deg conical

60 Hz – 60 Hz 65 Hz – 30 Hz 60 Hz – 30 Hz84 dB 88 dB 90 dB100 dB (average) 106 dB (peak) 105 dB (average) 111 dB (peak) 108 dB (average) 114 dB (peak)80 W @ 6 ohms 120 W @ 6 ohms 140 W @ 6 ohms2.3 kg 3.1 kg 5.3 kg 277.0 x 170.4 x 165.6 mm 340.5 x 212.2 x 216.5 mm 451.8 x 290.0 x 296.0 mm(10.91" x 6.71" x 6.52") (13.41" x 8.36" x 8.52") (17.78" x 11.42" x 11.65")

iS52

ACCESSORY

BACK CAN

OPTIONAL

iS52

is 52


039

Tannoy’s highly versatile range of passive soundreinforcement loudspeakers have established afirm reputation across the world, renowned fortheir crisp, clear sonic character, exceptional transient response and highly controlled coverage. Designed to provide the optimal acoustic solutionfor practically any application; bars and nightclubsto houses of worship, sports arenas, performancevenues, corporate AV and transport hubs, to namea few.

At the forefront of Tannoy’s passive sound reinforcement line up is the award-winning VQ Series, a revolutionary range of highly directive, extremely efficient and exceptionally clear and detailed loudspeakers based on the latest pointsource driver technology and unique approach tohorn design. Available as full-range enclosures or as modular components, with separate down-firing and LF devices, VQ Series representsthe most significant leap forward in loudspeakertechnology in years.

For small and mid-sized applications, the morecompact VX Series is a market leader. Equippedwith Tannoy’s legendary Dual Concentric driveunits, V-Series offers the unmistakable Tannoy signature audio quality, in a robust and compactenclosure – equally at home in fixed install or in alive music environment as stage monitoring.

For those projects that demand something thatlooks as good as it sounds, there’s Tannoy’s Designer Install range. Available with either ICTor Dual Concentric drive units in a high impactpolystyrene all-weather (IP64 rated) enclosure, DiSeries is equally suited to a style bar or an outdoorwaterpark.

PassiveSoundReinforcement


A range of revolutionary loudspeakersdesigned for any application whereprecise directional control, outstanding sonic performance,efficiency and high SPL's are criticalissues; such as large corporate AVsystems, stadiums, large dance clubs,live concert halls, theatres, houses ofworship and open-air venues.

VQ Series

The VQ 60 and VQ 100 are full range, three-way loudspeaker systems designed for applications which require very high output capability with class leadingpattern control. The VQ series is perfectly suited for use in arrays or singly in demanding music or speech applications. Unlike line array and cluster solutions, asingle VQ unit can produce more power and clarity over its specified beamwidth area than many arrayed solutions using multiple cabinets. The advantage of apoint-source VQ system is consistent and accurate coverage of a given space without the multi-driver interference of clusters and line arrays. The reducednumber of enclosures is also a great advantage in terms of ease of installation and building aesthetics.

Description

Tech Brief VQ 60 VQ 1003-way full range – point source 3-way full range – point source60 degrees conical 100 degrees conical90 Hz - 27 kHz 90 Hz - 27 kHz115 dB (2.83 V @ 8 ohms) 110 dB (2.83 V @ 8 ohms)138 dB (average) 134 dB (peak) 134 dB (average) 140 dB (peak)400 W into 8 ohms 400 W into 8 ohms77 kg 65 kg925 mm x 694 mm x 515 mm 925 mm x 694 mm x 515 mm(36.4” x 27.3” x 20.3”) (36.4” x 27.3” x 20.3”)

These additional horn enclosures have been designed to cater for a wide range of typical applications and offer some industry standard dispersionpatterns, namely 40 degree (conical), 60 x 40 and 90 x 50 degree (in vertical position). The modular design approach allows the system designer tocreate seamless and very predictable arrays which are ‘tight packed’ to avoid any unsightly spaces between cabinets; or they can be used singly aspart of large distributed systems. VQ MH devices address the requirement for compact dimensions without compromising performance in any way,thanks to our unique approach in keeping what is effectively a Dual Concentric behind a single horn, coupled to Tannoy’s patented PSW™ technology.

Tech Brief VQ 40MH VQ 64MH VQ 95MH

Description

2-Way Mid/High - Point Source 2-Way Mid/High - Point Source 2-Way Mid/High - Point Source 40 x 40 degrees 60 x 40 degrees 90 x 50 degrees350 Hz - 27 kHz 350 Hz - 27 kHz 350 Hz - 27 kHz117 dB (2.83 V @ 8 ohms) 115 dB (2.83 V @ 8 ohms) 111 dB (2.83 V @ 8 ohms)140 dB (average) 146 dB (peak) 138 dB (average) 144 dB (peak) 134 dB (average) 140 dB (peak)400 W into 8 ohms 400 W into 8 ohms 400 W into 8 ohms46.5 kg 45.5 kg 35.5 kg510 mm x 694 mm x 515 mm 510 mm x 694 mm x 515 mm 510 mm x 694 mm x 515 mm (20.1” x 27.3” x 20.3”) (20.1” x 27.3” x 20.3”) (20.1” x 27.3” x 20.3”)

040

Driver Complement DispersionFreq Range (-10 dB) Sensitivity (1 W @ 1m)Rated Max SPLRec. Amp Power WeightDimensions (HxWxD)


Overview


VQ Series

041

The VQ 40DF (40x40), VQ 64DF(60x40) and VQ 85DF (80x50) arevery high output down firingMid/High loudspeaker systems designed for applications requiringhigh impact sound reinforcementwith class leading pattern control.The modular design approach allows the sound system designerto create seamless and predictablearrays, or they can be used singlyas part of large distributed systems.

The VQ DF can be configured for use in Single-Amp or Bi-Amp mode, in conjunction with a suitable digital signal processor (DSP). Horn design involves balancing compromise…..until now.

Our unique approach in keeping what is effectively a Dual Concentric behind a single horn gives us many performance advantages. Performance ofthe VQ DF in terms of accuracy & sound quality is second to none. The VQ horn design principles provide definitive and measurable advantages overmultiple-horn and co-axial designs.

Description

Duplicating the low frequency performance of the VQ 60 & VQ 100 full range loudspeakers, the VQ MB is intended for use as a flown or groundstacked, high power low/mid frequency module used in conjunction with full range or mid/high systems in the VQ series. Two (12”) low frequencytransducers, offer high power handling and low power compression for high continuous SPL capability. A newly designed LF loading design providesthe highest possible sensitivity for low/mid frequency output (105 dB/w).

The VS 15DR satisfies a specific requirement for applications where an installed VQ Series system needs to deliver more low-frequency response thanis possible with simply the 2 x 12” LF element of the VQ MB. The VS 15DR shares the same modular enclosure format as the other VQ Series modulesincluding the VQ MH, allowing the systems designer to create tightly packed arrays or clusters.

Tech Brief VQ MB VS 15DR

Tech Brief VQ 40DF VQ 64DF VQ 85DF2-Way Mid/High - Point Source 2-Way Mid/High - Point Source 2-Way Mid/High - Point Source40 x 40 degrees 60 x 40 degrees 80 x 50 degrees350 Hz - 27 kHz 350 Hz - 27 kHz 350 Hz - 27 kHz112 dB (2.83 V @ 8 ohms) 111 dB (2.83 V @ 8 ohms) 110 dB (2.83 V @ 8 ohms)135 dB average, 141 dB peak 134 dB (average), 140 dB (peak) 134 dB (average), 140 dB (peak)400 W 400 W 400 W32 kg 30.5 kg 28 kg460 mm x 694 mm x 497 mm 460 mm x 694 mm x 497 mm 460mm x 694mm x 497mm(18.1” x 27.3” x 19.6”) (18.1” x 27.3” x 19.6”) (18.1” x 27.3” x 19.6”)

Description

Mid Bass - Vented Bass loudspeaker - Direct radiator- -90 Hz - 600 Hz 38 Hz - 4500 Hz105 dB (2.0 V @ 4 ohms) 100 dB (1W = 2.83 V for 8 ohms)135 dB average, 141 dB peak 130 dB (average), 136 dB (peak)2000 W into 4 ohms 1200 - 2000 Watt / 8 ohms37.0 kg 33 kg433 mm x 694 mm x 515 mm 510 mm x 694 mm x 515 mm(17” x 27.3” x 20.3”) (20.1” x 27.3” x 20.3”)



Overview


The DriverThe VQ products utilize a unique driver technology to radiate a coherent single point source for superior dispersion control when coupled to our single horn. This advanced design aligns the acoustical centres of the transducers providing a single coherentwavefront emanating from the throat. The driver uses two concentricannular ring diaphragms. The larger of the two has a 3.5” voice coiland reproduces frequencies from 400 Hz to 7 kHz. Another majoradvantage here is that there is no crossover anywhere near the vocalregion ensuring the most natural and phase coherent reproduction atthis critical area. The 2” HF diaphragm takes over at 7 kHz to 22 kHzby way of a passive or an active crossover. The external casting features extensive heat-sinking ensuring good heat transfer for highpower handling and very low power compression.

The Horn The use of a Dual Concentric compression driver results in a wavefront at the throat of the horn being perfectly coherent acrossits frequency range. The MF/HF transducer loads into a large and proprietary designed common horn. There is a huge advantage herein comparison to acoustic sources hither to used with horns whichconsist of an HF compression driver and a separate midrange compression driver, each with its own horn. Invariably there is interference between the midrange and high frequency at thecrossover. This results in uneven off axis performance, even if the HF horn is mounted in front of the MF horn. This artefact is compounded even further if the sources are displaced on the frontbaffle – No exceptions.

We found that superior sonic performance of the horn was achievable by using MDF instead of fabricating in fibreglass, due to the inert nature of the structure providing rigidity, and the particular nature of the material itself being acoustically absorbent and not susceptible to resonance.

Efficiency. Power. Clarity.VQ’s very high sensitivity ensures exceptional SPL levels can be achieved with a very modest amount of amplifier power. As a benchmark example, a single VQ 60 enclosure will produce 115 dB for 1 Watt; and a sustained 138 dB (144 dB peak) for only200 Watts of amplifier power - with a tightly controlled 60° dispersionpattern above 800 Hz delivering exceptionally even coverage and excellent clarity.

Modular Design for Arrayed SystemsVersatility is the key with VQ Series thanks to its modular and compact enclosure format. VQ Series’ class leading pattern controlradiating from a coherent single point source ensures predictablearray performance allowing very accurate system design, thanks toour patented PSW waveguide. This modular design approach allows the designer to create tightly packed, scaleable arrays utilising combinations of VQ MH, DF, and MB elements.

Our easy to rig Flyware boasts an industry leading 10:1 safety factor forcomplete confidence and peace of mind.

VQ Series

042

VQ MB

VQ MB

VQ 40MH

VQ 40DF

VQ Series Technology


With an expanded range of enclosures and transducer compliments, the new VX Seriescombines next-generation DualConcentric driver technology with smart, ergonomic, portable and install-friendly new cabinet designs, enhanced build quality, and carefully thought-out functionality.

VX Series

With 10 passive models in the range, each with the Tannoy’s acclaimed Dual Concentric point-source driver at their heart, VX delivers class-leadingacoustic performance in an aesthetically refined and robust plywood enclosure. Among the new driver compliments, are 12" and 15" models debutingTannoy’s innovative Q-Centric Waveguide™ (QCW™) delivering enhanced pattern control, as well as twin driver models for enhanced LF performanceand versatility. The brand new cabinet design features double-chamfered edges, with innovative new Integrip™ handles ergonomically integrated intoall but the two smallest enclosures, making one-hand or two-handed lifting of even the largest models easy.

Description

Description

All models are finished in highly durable scuff-resistant paint – available in black and white as standard, with matching grille assembly and mountinghardware. Custom specified RAL colours are available to perfectly match those aesthetically sensitive installations, while high-spec fully weatherisedversions will also be available, for demanding outdoor applications. An extensive range of mounting hardware flyware will be available, custom designed for VX Series and manufactured by K&M. All hardware has been tested and certified to guarantee greater than 10:1 safety ratio – ensuringpeace of mind and security in the rating of the mounting hardware.

044

Tech Brief VX 5.2 VX 6 VX 8 VX 8.2125 mm (5”) Dual Concentric 150 mm (6”) Dual Concentric 200 mm (8”) Dual Concentric 200 mm (8”) Dual Concentric125 mm (5”) Bass - - 200 mm (8”) Bass120 x 90 degrees conical 90 degrees conical 90 degrees conical 90 degrees conical65 Hz - 450 kHz 80 Hz – 45 kHz 62 Hz – 45 kHz 60 Hz – 45 kHz90 dB 91 dB 92 dB 92 dB111 dB (average) 117 dB (peak) 111 dB (average) 117 dB (peak) 113 dB (average) 119 dB (peak) 115 dB (average) 121 dB (peak)260 W @ 8 ohms 200 W @ 8 ohms 260 W @ 8 ohms 400 W @ 8 ohms5 kg 5.5 kg 8.5 kg 15.5 kg333 mm x 180 mm x 200 mm 333 mm x 225 mm x 215mm 388 mm x 280 mm x 275 mm 590 mm x 280 mm x 275 mm(13.1” x 7.1” x 7.9”) (13.1” x 8.9” x 8.5”) (15.3” x 11.0” x 10.8”) 23.2” x 11.0” x 10.8”)

Driver Complement

DispersionFreq Range (-10 dB)Sensitivity (1 W @ 1 m)Rated Max SPLRec. Amp Power WeightDimensions (HxWxD)

Tech Brief VX 12 VX 12HP VX 12Q VX 12.2QDriver Complement

DispersionFreq Range (-10 dB)Sensitivity (1 W @1 m)Rated Max SPLRec. Amp Power WeightDimensions (HxWxD)

Overview

305 mm (12”) Dual Concentric 305 mm (12”) Dual Concentric 305 mm (12”) Dual Concentric 305 mm (12”) Dual Concentric - PowerDual QCW, 305 mm (12”) Bass QCW, 305 mm (12”) Bass90 degrees conical 75 degrees conical 75 x 40 degrees 75 x 40 degrees55 Hz – 38 kHz 60 Hz – 30 kHz 60 Hz – 30 kHz 55 Hz – 30 kHz97 dB 99 dB 99 dB 99 dB120 dB (average) 126 dB (peak) 124 dB (average) 130 dB (peak) 124 dB (average) 130 dB (peak) 126 dB (average) 132 dB (peak)400 W @ 8 ohms 700 W @ 8 ohms 700 W @ 8 ohms 1 kW @ 8 ohms17 kg 21.5 kg 21 kg 33.5 kg486 mm x 370 mm x 360 mm 486 mm x 370 mm x 360 mm 486 mm x 370 mm x 360 mm 780 mm x 370 mm x 360 mm(19.1” x 14.6” x 14.1”) (19.1” x 14.6” x 14.1”) (19.1” x 14.6” x 14.1”) (30.7” x 14.6” x 14.1”)


VX Series

Thanks to the asymmetric cabinet profile of the larger VX (and VXP) enclosures, the 12" and 15" devices can be used as floor monitor wedges, orientedat a variety of angles to suit the performance parameters. All devices have removable plate on underside to reveal pole mount option – making it a serious performer for situations such as portable House of Worship PA or live DJ performance monitoring.

Description

045

Tech Brief VX 15HP VX 15Q380 mm (15”) Dual Concentric 380 mm (15”) Dual ConcentricPowerDual Q-Centric Waveguide75 degrees conical 75 x 40 degrees58 Hz – 30 kHz 58 Hz – 30 kHz100 dB 100 dB126 dB (average) 132 dB (peak) 126 dB (average) 132 dB (peak)800 W @ 8 ohms 800 W @ 8 ohms26.5 kg 27 kg590 mm x 450 mm x 420 mm 590 mm x 450 mm x 420 mm(23.2” x 17.7” x 16.5”) (23.2” x 17.7” x 16.5”)

Driver Complement

DispersionFreq Range (-10 dB)Sensitivity (1 W @ 1 m)Rated Max SPLRec. Amp Power WeightDimensions (HxWxD)

Hardware and Weather Proof Options

An extensive range of high performance steel mounting hardware is available, custom designed for VX Series and manufactured by K&M. This includes a yokebracket and omni-mount for wall and ceiling location as well as eyebolt locationpoints and a VTH top-hat for pole-mounting. All hardware has been tested and certifiedby K&M to guarantee greater than 10:1 safety ratio – giving installers complete peace of mind.

All VX Series models are available in black or white textured paint finish as standard,with matchin ggrilles, and is also available in custom matched RAL colours as an option.

A weather proof specification (WP) is also available as an option. Thus includesLINE-X™ cabinet outer-coating, internal prism sealing and treated transducers with perforated Grade 316 Stainless Steel grilles. All steel hardware is upgraded to Grade 304 SS, while all connector panel points are protected by a cover plate and weather-proof cable gland. Additional lead time applies to all non-standardspecifications.


PoweredSoundReinforcementTannoy’s renowned sound reinforcement loudspeaker ranges include not just passive butalso self-powered ranges, as well as advancedVNET products with leading edge digital signal processing, network control and Class D amplifier technologies onboard.

The firmly established V-Series product range isavailable in self-powered form in the shape ofPowerV, while VNET packages are available onthe 12” and 15” driver equipped products formore demanding, high performance applications.

Tannoy’s newest sound reinforcement technologyis represented by the award-winning VQ NETrange – delivering the class-leading performanceof VQ Series with the added benefit of the VNETpackage for complete versatility and ease of installation.

Also available in self-powered format is the Designer Install series, in the shape of the Di 5a,perfectly suited to indoor applications where stylish appearance is a factor without compromising on sound quality.

047


VQ NET

The intuitive setup software, integrated processing, tuning control, performance diagnostics and protection produces an easy to install and exceptionally high performance networkable loudspeaker. VNET supports free network topology so that the loudspeakers can be arranged in a daisy chain, linked in a star configuration or in any combination of both.

System commissioning and ongoing venue network control, incorporating real time diagnostics of electronics and drive unit, are all managed by the exclusive VNET software package. Supplied with each VQ NET unit, this intuitive Windows tool controls all of the critical install, commissioning and performance monitoring functions.

Description

Tech Brief VQ NET 60 VQ NET 100

Integrated with cutting edge digital signal processing, network control and dual channel Class D amplification, the VQ NET 40MH (40x40), VQ NET64MH (60x40) and VQ NET 95MH (90x50) are very high output Mid/High loudspeaker systems designed for applications requiring high impactsound reinforcement over large distances with class leading pattern control.The modular design approach allows the sound system designer to create seamless and predictable arrays, or they can be used singly as part of large distributed systems. VQ MH addresses the requirement forcompact dimensions without compromising performance in any way.

Description

Tech Brief VQ NET 40MH VQ NET 64MH VQ NET 95MHDual Concentric Compression driver Dual Concentric Compression driver Dual Concentric Compression driver40 degrees conical 60 x 40 degrees 90 x 50 degrees350 Hz - 27 kHz 350 Hz - 27 kHz 350 Hz - 27 kHz- - -140 dB (average) 146 dB (peak) 138 dB (average) 144 dB (peak) 134 dB (average) 140 dB (peak)400 W MF / 200 W HF 400 W MF / 200 W HF 400 W MF / 200 W HFTBA 48.5 kg 39 kg510 mm x 694 mm 515 mm 510 mm x 694 mm 515mm 510 mm x 694 mm 515mm(20.1” x 27.3” x 20.3”) (20.1” x 27.3” x 20.3”) (20.1” x 27.3” x 20.3”)

Boasting the same capability andclass leading pattern control as VQ,the VQ NET series incorporates cutting edge digital signal processing, network control and dual channel Class amplification.Themodular approach of amplifiers, processing, monitoring and driversdesigned into each VQ NET loudspeaker enables acoustic optimization for the speaker to perform as a unified whole.

048

Driver Complement DispersionFreq Range (-10 dB)Sensitivity (1 W @ 1 m)Rated Max SPL Power RatingWeightDimensions (HxWxD)


Overview

3-way full range – point source 3-way full range – point source60 degrees conical 100 degrees conical90 Hz - 27 kHz 90 Hz-27 kHz115 dB 110 dB138 dB (average) 144 dB (peak) 134 dB (average) 140 dB (peak)400 W MF/HF, 800 W LF 400 W MF/HF, 800 W LF80 kg 68 kg925 mm x 694 mm x 515 mm 925 mm x 694 mm x 515 mm (36.4” x 27.3” x 20.3”) (36.4” x 27.3” x 20.3”)


IN CEILING

RANGE

049

VQ Net

Each VQ NET DF incorporates a unique driver technology to radiate a coherent single point source for superior dispersion control when coupled to aPSW™ (Point Source Waveguide). This advanced design aligns the acoustical centres of the transducers providing a single coherent wavefrontemanating from the throat. The PSW waveguide achieves an optimum balance of extremely well controlled coverage, smooth frequency response, andnatural sound character. The modular approach of amplifiers, processing, monitoring and drivers designed into each loudspeaker enables acousticoptimization for the speaker to perform as a unified whole.The intuitive setup software, integrated processing, tuning control, performance diagnosticsand protection produces an easy to install and exceptionally high performance networkable loudspeaker.

Description

Dual Concentric Dual Concentric Dual Concentric 40 degrees conical 60 x 40 degrees 80 x 50 degrees350 Hz - 27 kHz 350 Hz - 27 kHz 350 Hz - 27 kHz- - -135 dB (average) 141 dB (peak) 134 dB (average) 140 dB (peak) 133 dB (average) 139 dB (peak)400 W MF / 200 W HF 400 W MF / 200 W HF 400 W MF / 200 W HF32 kg 32.5 kg 31 kg460 mm x 694 mm x 497 mm 460 mm x 694 mm x 497 mm 460 mm x 694 mm x 497 mm(18.1” x 27.3” x 19.6”) (18.1” x 27.3” x 19.6”) (18.1” x 27.3” x 19.6”)

Tech Brief VQ NET 40DF VQ NET 60DF VQ NET 85DF

The VQ NET MB is principally intended for use with VQ systems to construct arrays with extended low frequency pattern control. By fixing a VQ NETMB at the opposing end of a VQ full range loudspeaker we can effectively extend pattern control to below the cutoff point of the Mid/High PSW™waveguide. By offsetting the devices using delay we can also steer the low frequency lobe. The VQ NET MB can be used to extend the bandwidth ofany VQ Mid/High product whether singly or as part of an array.

The VNET 15DR satisfies a specific requirement for applications where an installed VQ Series system needs to deliver more low-frequency responsethan is possible with simply the 2 x 12” LF element of the VQ MB. The VNET 15DR shares the same modular enclosure format as the other VQ Seriesmodules including the VQ MH, allowing the systems designer to create tightly packed arrays or clusters.

Description

Tech Brief VQ NET MB VNET 15DR2 x 300 mm (12”) LF 1 x 380 mm (15”) Bass Driver- -90 Hz - 600 Hz 38 Hz - 4500 Hz- -135 dB average, 141 dB peak 130 dB (average), 136 dB (peak)2000 W 1200 W41 kg 36 kg433 mm x 694 mm x 515 mm 510 mm x 694 mm x 515 mm(17” x 27.3” x 20.3”) (20.1” x 27.3” x 20.3”)

Integrated with cutting edge digital signal processing, network control and dual channel Class D amplification,the VQ NET 40DF (40x40), VQ NET64DF (60x40) and VQ NET 85DF(80x50) are very high output down firing Mid/High loudspeaker systems designed for applications requiring highimpact sound reinforcement with classleading pattern control.



Overview


VXP Series

050

VXP Series combines the class-leading performance of the passive VX Series withLab.gruppen’s new Integrated IntelliDrive Energy Efficient Amplifier module, bringing ultrareliable and perfectly matchedpower to the equation for audible superiority in a self-powered box.

Conceived, engineered and built with precision in the United Kingdom, VXP Series represents a brand new evolution in Tannoy’s core philosophies inself-powered loudspeaker design. Tannoy VXP Series combines the technological refinement of the passive VX Series with the brand new IDEEA™ integrated power module from Lab.gruppen. The result is a highly compact, ultra-reliable and efficient, self-powered loudspeaker offering a punchy and sonically superior solution for small and medium scale sound reinforcement and high performance speech reproduction where clarity and vocalcharacter are paramount.

Description

Tech Brief VXP 6 VXP 8 VXP 8.2150 mm (6”) Dual Concentric 200 mm (8”) Dual Concentric 200 mm (8”) Dual Concentric- - 200 mm (8”) Bass90 degrees conical 90 degrees conical 90 degrees conical80 Hz – 45 kHz 67 Hz – 45 kHz 60 Hz – 45 kHz- - -111 dB (average) 117 dB (peak) 113 dB (average) 119 dB (peak) 115 dB (average) 121 dB (peak)- - -7.0 kg 10.0 kg 17.5 kg333 mm x 225 mm x 215 mm 388 mm x 280 mm x 275 mm 590 mm x 280 mm x 275 mm(13.1” x 8.9” x 8.5”) (15.3” x 11.0” x 10.8”) (23.2” x 11.0” x 10.8”)

Driver Complement

DispersionFreq Range (-10 dB)SensitvityRated Max SPLPower RatingWeightDimensions (HxWxD)

Description

At the heart of the IDEEA module is a patented Class D output stage capable of high power levels with very low distortion and minimal current draw –all with a net operating efficiency in excess of 80%. A universal switching power supply accepts any mains voltage from 70 – 265 V ( /- 10%) at 50 Hzor 60 Hz through the appropriate IEC cord. In Auto mode, the speaker turns on with signal present and switches to standby mode after 20 minutes ofno input, in doing so reducing power consumption to less than 1 W (while in standby). Manual control mode allows the speaker to be turned on and offas required. Also provided is a switchable 90 Hz high-pass filter for use when adding a subwoofer.

Tech Brief VXP 12 VXP 12HP VXP 12QDriver Complement


Overview

305 mm (12”) Dual Concentric 305 mm (12”) Dual Concentric 305 mm (12”) Dual Concentric- PowerDual Q-Centric Waveguide90 degrees conical 75 degrees conical 75 x 40 degrees55 Hz – 38 kHz 60 Hz – 30 kHz 60 Hz – 30 kHz- - -120 dB (average) 126 dB (peak) 124 dB (average) 130 dB (peak) 115 dB (average) 121 dB (peak)- - -19.0 kg 23.5 kg 23.0 kg486 mm x 370 mm x 360 mm 486 mm x 370 mm x 360 mm 486 mm x 370 mm x 360 mm(19.1” x 14.6” x 14.1”) (19.1” x 14.6” x 14.1”) (19.1” x 14.6” x 14.1”)


VXP Series

051

VNET Accessories

USB & RS232 Power Supply Mount Kit VNET SC1Description Tech Brief

Tannoy VNET usb andRS232 interfaceThis rack mountable interfaceallows communicationbetween a VNET network and computer.(A)

(A) (B)

(D)

(C)

Tannoy VNET accessorypower supplyThis power supply unit is onlyrequired when communicationwith a VNET network is byRS232(B)

Tannoy VNET accessoryrack mount kitThis 1U bracket allows themounting of up to three VNETinterface accessories in astandard 19” equipment rack.(C)

Inputs Two x XLROutputs Six x XLRSample rate / bit depth 96 kHz / 24 bitFrequency Response 10 Hz – 40 kHz (+/- 3 dB with filters disabled)Frequency Response 20 Hz – 20 Hz(+/- 0.5 dB with filters disabled)LP / HP filter types 12, 18 & 24 dB/octave Bessel

and Butterworth 12, 24 and (D) 48 dB/octave Linkwitz Riley

4th or 8th order Hardman

The perfectly matched integrated Lab.gruppen IDEEA (IntelliDrive Energy Efficient Amplifier) modules are designed to handle the demands of fixed installation audio, with the inherent extended duty cycles of around-the-clock operation and very high performance demands, while offering the durability, unmatched power output and clarity required by portable applications. To ensure a long and trouble-free service life, IDEEA modules incorporate extensive features to safeguard internal circuits and driver compliment.

Description

Tech Brief VXP 12.2Q VXP 15HP VXP 15Q305 mm (12”) Dual Concentric 380 mm (15”) Dual Concentric 380 mm (15”) Dual ConcentricQCW, 305 mm (12”) Bass PowerDual Q-Centric Waveguide75 x 40 degrees 75 degrees conical 75 x 40 degrees47 Hz – 30 kHz 47 Hz – 30 kHz 47 Hz – 30 kHz- - -126 dB (average) 132 dB (peak) 126 dB (average) 132 dB (peak) 126 dB (average) 132 dB (peak)- - -35.0 kg 29.0 kg 29.0 kg 780 mm x 370 mm x 360 mm 590 mm x 450 mm x 420 mm 590 mm x 450 mm x 420 mm(30.7” x 14.6” x 14.1”) (23.2” x 17.7” x 16.5”) (23.2” x 17.7” x 16.5”)

Driver Complement



ARC PavilionUniversity of California Davis Campus(VQ Series)


K & M Hardware

054

V6 Horizontal Yoke Wall Mount ExtensionMulti Angle Wall Mount V8 Horizontal Yoke V8 Verticall Yoke

V12 / V300 Vertical Yoke V12 Horizontal Yoke V15 Vertical Yoke V5 / V300 Horizontal Yoke

Versatile hardware for V seriesspeakers manufactured by K&M inGermany to VGB C1 specifications.

V SERIES

BRACKETS ACCESSORIES

Yoke (Horizontal Instalation) Yoke (Vertical Instalation) Multi Angle Wall Mount Wall Mount Extension

Overview

V6

V8

V12

V12 HP

V15

V300

POWER V6

POWER V8

POWER V12

POWER V12 HP

POWER V15

VNET 12

VNET 12 HP

V NET 15

VNET 300

i7

i9

i SERIES


Wall Mount Bracket Pole Mount Adapter


055

Hardware

V6 / POWER V6

V8 / POWER V8

V12 / VNET 12

POWER V12

V12HP / VNET 12HP

V15

VNET 15

V300 / VNET 300

VS10 BP

VS15 BP / VNET 15BP

VS15 HL / VNET 15HL

VS18 DR / VNET 18DR

VQ SERIES

SERIES


V6Y V8Y V8B V12Y V15Y VMB 1 VCB 2 VCB 4 VEB VCS VTH VPC 2 3 4

VTH V6Y V8YV12Y

V8B

V15Y

VCB 4 VCSVEB

1

432

VPCVMB

VCB 2


Live / Rental Sound

Tannoy’s industry-leading expertise in sound reinforcement loudspeaker technology is equallyat home in a live sound environment as it is within installed sound applications. The recentdevelopment of the VQ Live system, derived from the same ground-breaking innovationsfound in VQ Series install series , has put Tannoyright at the forefront of live sound point-sourceloudspeaker solutions.

Available as a scalable system of highly portableand easy to set-up powered tops and high powered subwoofer enclosures, VQ Live offersan entirely new alternative to rental companies inthe medium scale segment of the touring soundmarket, delivering unheralded clarity, directivityand SPL with far fewer boxes than a typical linearray system.

For less demanding applications, Tannoy’s PowerV range of powered pole-mountableDual Concentric driver equipped loudspeaker enclosures are a tried and tested solution forsmall scale live sound reinforcement or on-stage monitoring.

057


This direct radiating dual 18” subwoofer cabinet is designed to partner VQ LIVE full range touring loudspeakers, the VNET 218DR LIVE is perfect forapplications where increased headroom is required for high definition sound reinforcement at low and ultra low frequencies. Extending the frequency response of the system down to 31 Hz makes the VNET 218DR LIVE ideal for effects in live music performances in a multitude of environments including open-air, arena and theatres as well as large dance club and concert sound applications.

Description

Tech Brief VNET 218DR LIVE2 x 458 mm (18”) Horn loaded24 Hz - 1.5 kHz137 dB (average) 143 dB (peak)2500 W110 kg700 mm x 1050 mm x 850 mm(27.6” x 41.3” x 33.5”)

Driver Complement Freq Range (-10 dB)Rated Max SPLPower RatingWeightDimensions (HxWxD)

The VQ NET 60 LIVE is a full range, three-way loudspeaker system designed for rental/hire applications which require very high output capability withclass leading pattern control. Integrated with cutting edge digital signal processing, network control and dual channel Class D amplification, the systemis perfectly suited for use in arrays or singly in wide range of demanding situations. Each VQ NET 60 LIVE comes with ‘easy-lock’ wheel-board (‘dolly’)for easy transit on/off site as well as refined ergonomic handle grips. The cabinet design allows for side-by-side rigging and flying with the dedicatedhardware (optional). Each unit also comes with protective transit covers.

Description

3-way full range – point source60 degrees conical90 Hz - 27 kHz(LF) 134 dB average, 140 dB peak(MF/HF) 138 dB average, 144 dB peak400 W MF/HF, 800 W LF86.5 kg (98.5 kg with dolly)925 mm x 620 mm x 502 mm(36.4” x 24” x 19.7”)

Tech Brief VQ NET 60 LIVE

058

Offering significant and tangible benefitsover many existing solutions: sonic superiority, less boxes required, lowercosts and full VNET implementation (allowing system setup and ongoingvenue network control, incorporatingreal time diagnostics), VQ LIVE has thepotential to be a true line array killer.

VQ LIVE

Driver Complement DispersionFreq Range (-10 dB)Rated Max SPL

Power RatingWeightDimensions (HxWxD)

Overview


To illustrate the highly controlled and predictable SPL coverage ofVQ Series technology (in this case a single VQ 60) and offer acomparison with a typical 4 enclosure line array system, the following EASE simulation plots were generated. The room usedfor the simulation is 30 m deep (from stage to rear wall) and 40 mwide. The stage area has an upstage to down stage distance of 8 m.

Both the VQ and the Line Array enclosures were placed 5 mabove floor level in line with the front of the stage area. The angleused between the enclosures for the line array is fromhorizontal tothe top enclosure 8.5 degrees, between the top and the second enclosure is 2 degrees, between the second and third is degreesand between the third and the fourth is 10 degrees.

The coverage maps consider the anticipated direct SPL at the following spot frequencies: 500 Hz, 1 kHz, 2 kHz, and 4 kHzacross the audience listening area and the stage area.

Note the scattering effect to the sides of the audience space in the higher frequency ranges, particularly in the near-field area close to the stage, that line array systems are prone to sufferingfrom. In contrast, the VQ system maintains constant directivity andSPL coverage throughout the frequency range – all with just a single box.

Comparative EASE Simulation of VQ Series and Line Array

VQ 60 @ 500 Hz

VQ 60 @ 1 kHz

VQ 60 @ 2 kHz

VQ 60 @ 4 kHz

4 box array @ 500 Hz

4 box array @ 1 kHz

4 box array @ 2 kHz

4 box array @ 4 kHz

VQ 60 @ 8 kHz 4 box array @ 8 kHz

059


061

Amps / ControlThe three high power amplifiers and two exceptionally flexible digital system controllers in this category are ideally suited to applicationsranging from fixed installations to cost-effectivelive sound systems. Specifically designed andoptimised for Tannoy loudspeaker products they enable quick and easy high performancesystem integration.

In addition there is a range of interface and power supply accessories designed for use with the VNET range of loudspeakers.


TDX 1

The TDX1 is a ‘2 in 4 out’, powerful,digital system controller, which featuresCrossover, EQ, Delay and Limitingfunctions. The superior audio quality ofthis feature packed unit offers installersand contractors a competitively priced,yet highly versatile solution for flexiblesystem configuration and optimizing theperformance of Tannoy loudspeakersystems. Ideally suited to fixedinstallations and live applications, theTDX1 combines the functions of multipleconventional products in a compact 1Uof rack space.

Presets for the most common configurations of the Tannoy product ranges are preloaded in to the TDX1, with a further 100 provided to allow othercustom configurations to be programmed. Each input has gain control and 4 bands of parametric EQ with band 1 and 4 offering settings for LF andHF shelving response.

The unique routing engine will allow any input to be sent to any output. Butterworth, Bessel and Linkwitz Riley type filters are available on alloutputs, which can be configured as 2, 3 or 4-way crossovers. All output channels feature an independent speaker alignment delay (200 ms perchannel) and a 4 band parametric EQ for speaker management. Four high performance limiters offer a wide range of control over Attack, Releaseand Threshold parameters. Two input and four output balanced XLR sockets. SPDIF digital input (44.1 or 48 kHz) allowing the signal to be kept inthe digital domain. Simple and intuitive signal flow based interface with clear 2 x 16 character backlit LCD.

Description

Tech Brief TDX1Balanced inputs Two x XLRImpedance, bal / unbal 21 kohms / 13 kohmsInput level, max / min @ 0 dBFS +24 dBu / 0 dBuSensitivity range @ 12 dB headroom -12 dBu to +12 dBuA to D conversion 24 bit, 128 x oversampling bitstreamBalanced outputs Four x XLRImpedance, bal / unbal 40 ohms / 20 ohmsMax output level +14 dBuD to A conversion 24 bit, 128 x oversampling bitstream

062

Overview


In its basic configuration the TannoyVNET SC1 is a powerful ‘2 in 6 out’digital system controller whichprovides multiple X-Over, EQ, Delayand Limiting options. Using DSP-based digital crossoverswith 96 kHz sampling rates, thisversatile controller will enablesimple configuration andoptimisation of loudspeakers interms of speaker managementand room EQ functionality.

VNET SC1

Using a Tannoy VNET SC1 with a powered loudspeaker system (e.g. Tannoy POWERV™)

Installing VNET SC1

Two versions of the VNET SC1 are available – one with a VNET network card and one without; offering a competitively priced, yet highly versatilesolution for flexible system configuration and optimising the performance of loudspeaker systems. Any of the inputs (A, B, or sum) can be routed to anyoutput with the unique routing engine of the VNET SC1. The universal switch mode power supply automatically adapts to mains voltages from 85 to240 volts.. The ‘network enabled’ version facilitates VNET networking capability with two network ports provided for connection to any Tannoy VNETsystem. Set up of the unit is exceptionally simple thanks to the intuitive signal flow based interface, or it can be controlled from a PC with Tannoy’sstandard VNET software

Description

064

VNET SC1

AUDIO SOURCE

* VNET TM interface allows networking of multiple VNET TM speakers or SC1 controllers KEY Network connection

Audio connection

RS232*

VNET SC1

AUDIO SOURCE

VNETTM interface

* The VNET™ interface allows networking of multiple VNET TM speakers or SC1 KEY Network connection

Audio connection

Using a network enabled VNET SC1 to combine an existingTannoy VNET system with another loudspeaker system(e.g. Tannoy POWERV™)

* The VNET interface allows networking of multiple VNET speakers or SC1 controllers

* The VNET interface allows networking of multiple VNET speakers or SC1 controllers

Network connectionAudio connection

KEY

Network connectionAudio connection

KEY

Tech Brief VNET SC1Inputs Two x XLROutputs Six x XLRSample rate / bit depth 96 kHz / 24 bitFrequency response 10 Hz – 40 kHz (+/- 3 dB with filters disabled)Frequency response 20 Hz – 20 Hz(+/- 0.5 dB with filters disabled)LP / HP filter types 12, 18 & 24 dB/octave Bessel and

Butterworth 12, 24 and 48 dB/octave Linkwitz Riley 4th or 8thorder Hardman

Overview

Installing the VNET SC1


KEY Network connection

3rd PARTYRS232/USB TO

RS485 INTERFACE

RS485RS485

LINK

RS485

LINK

RS485

LINK

Interconnection between the network computer and the speakers is very straightforward usingtwisted pair cable and simple connectors. The RS485 interface operates on a shared bus sothat a single computer can control any amplifier on the bus; enabling it to also gather statusinformation from any device on that bus. Each VNET module contains a unique address so thatno user input will be required to configure network nodes.

Every VNET loudspeaker controls its own DSP functions, so any unforeseen failure would beisolated to only that particular ‘node’. As only data to control setup functions and ongoing system diagnostics is carried over the network audio will be delivered. RS-485 cable is used for sending serial data, using a twisted pair to send and receive information to a high number of nodes over very long distances. This differential signal is very robust, while RS-485 is one ofthe most popular communications methods used in industrial applications where its noise immunity and long-distance capability are a perfect fit.

VNET supports ‘Free Network Topology’, allowing cabinets to be ‘daisy chained’, linked in a‘star’ configuration or in any combination of both. Network connections between nodes are viahigh quality, rugged Neutrik ‘ethercon’ connectors, which are compatible with standard RJ45plugs. Node connections are made using standard RJ45 connectors and CAT5 cable. Speakersidentified on the network set up screen have factory default names, which can be edited by theuser to reflect their actual location on the network. They can be physically located on the networkby selecting the ‘Flash’ function to activate an LED mounted on the front of the loudspeaker.

VNET Software

The loudspeakers are fully calibrated at the factory, avoiding the need to input the correctspeaker management settings or dynamics at the poin of install. This frees the installer to concentrate instead on room measurement and system optimisation. System commissioningand ongoing venue network control, incorporating real time diagnostics of electronics and driveunit, are all managed by the exclusive VNET software package. Supplied with each unit, this intuitive Windows tool controls all of the critical install, commissioning and performancemonitoring functions. A standard wireless LAN-to-serial bridge can be used to communicatewith the network, allowing the commissioning engineer to sit in the auditorium communicatingfrom a laptop on 802.11b

Monitoring & Telemetry Functions

During normal operation the speakers on the network will appear as minimised panels in theform of a status monitor icon (Monicon) on the computer screen. These are laid out to reflectthe physical layout of the speakers within the venue so that the user can monitor system statusand component condition at a glance. The minimised panels can be expanded to reveal highlydetailed information in real time:

Input clip indicatorTwo output limiter bar graph meter Heat sink temperature bar graph meterAmplifier clip indicators (HF & LF on full range units)Transducer Failure Indicators (HF & LF on full range units)Amplifier protect status indicator

VNET Software

VNET Free Network topology

VNET Networking

065


Subwoofers

067

Tannoy manufactures a wide range of highlyefficient and high power handling subwoofers,including passive, powered and VNET. Thissection contains information on Tannoy’s fullrange of subs including the most recentadditions to the V-Series and VNET subwooferranges. These include new larger format, highpower enclosures designed and engineeredspecifically with VQ Series in mind, and offer theperfect low frequency reinforcement solution forany VQ system. They can of course also beused in conjunction with Tannoy’s existing V-Series, POWERV or VNET loudspeakerranges.

Smaller, more compact and versatile subwooferdevices are also available for a wide variety ofchallenging installation situations, includingenclosures designed for discrete location underseating, integrated into bars and other fixedfurniture or recessed in walls or ceiling spaces.


A series of high efficiency,high power handling passivesubwoofer enclosures designed to deliver deep,powerful bass and highsound pressure levels at low and ultra low frequencies.These subwoofers are perfectly matched with Tannoy's passive V-Seriesloudspeakers.

Passive Subwoofers

Tannoy produce a range of compact, but powerful passive subwoofer enclosures designed to integrate perfectly with a V-Series full-range loudspeaker system, extending the low frequency response and provide some real bottom end kick where required. These VS-Series subwoofersrange from ultra compact 10” bandpass enclosures designed for discrete installation under seating or bars through to large format, high power handling twin driver subs designed for high energy dance music venues.

All VS-Series subwoofer enclosures are constructed with strong hardwood ply making them immensely durable and dependable, even when installed in high traffic areas such as busy nightclubs and bars.

DescriptionThese versatile, no compromise, all-purpose large format passive subwoofers are designed for the most demanding professional applications. The direct radiating VS 218DR and horn loaded VS 215HL offer exceptional output, high reliability and outstanding sonic performance providing low andVLF reproduction to complement any high SPL full range loudspeakers, including Tannoy’s VQ Series.

Extending the frequency response of the system to below 30 Hz makes these devices ideal for low frequency effects in high energy clubs, large corporate AV systems, stadiums, live concert halls, theatres, movie theatres and cinemas, large houses of worship and open-air venues.

Tech Brief VS 215HL VS 218DR

Tech Brief VS 10BP VS 15BP VS 15HL VS 18DR250 mm (10’) Vented bandpass 380 mm (15”) Vented bandpass 380 mm (15”) Horn loaded 458 mm (18”) Direct radiating39 Hz - 110 Hz 3 6Hz - 11 6Hz 60 Hz - 300 Hz 27 Hz - 240 Hz95 dB anechoic (2.83 V @ 8 ohms) 96 dB anechoic (2.83 V @ 8 ohms) 101 dB anechoic (2.83 V @ 8 ohms) 99 dB anechoic (2.83 V @ 8 ohms)118 dB (average) 124 dB (peak) 124 dB (average) 130 dB (peak) 130 dB (average) 136 dB (peak) 130 dB (average) 136 dB (peak) 400 W 600 W 800 W 1200 W17.50 kg 27 kg 40 kg 50 kg 355 mm x 385 mm x 590 mm 665 mm x 440 mmx 440 mm 578 mm x 555 mm x 650 mm 710 mm x 652.40 mm x 555 mm(14” x 15.2” x 23.3”) (26.2” x 17.3” x 17.3”) (22.8” x 21.9” x 25.6”) (28” x 25.7” x 21.9”)

2 x 380 mm (15”) Horn loaded 2 x 458 mm (18”) Horn loaded- 40 Hz - 450 Hz 24 Hz - 1.5 kHz

109 dB (1 W = 2 V for 4 ohms) 106 dB (1 W = 2 V for 4 ohms)142 dB (average) 148 dB (peak) 139 dB (average) 145 dB (peak)2000 Watt / 8 ohms 2000 Watt / 8 ohms4000 Watt / 4 ohms 4000 Watt / 4 ohms107 kg 105 kg700 mm x 1050 mm x 850 mm 700 mm x 1050 mm x 850 mm(27.6” x 41.3” x 33.5”) (27.6” x 41.3” x 33.5”)

068

Driver Complement Freq Range (-10 dB) Sensitivity (1 W @ 1 m)Rated Max SPLRec. Amp PowerWeightDimensions (HxWxD)

Driver Complement Freq Range (-10 dB)Sensitivity (1 W @ 1 m)Rated Max SPLRec. Amp Power

WeightDimensions (HxWxD)

Overview

Description


Incorporating a digital electronicssection in conjunction with efficient and reliable switchedmode power supply Class Dpower modules; these networkenabled subwoofer enclosuresare specifically engineered tocompliment Tannoy's VNET loudspeaker system.

A switch on the rear panel of the full range models allows selection between Full Range or High Pass modes, with High Pass allowing a speaker to bemounted in close proximity to a boundary or simply to increase headroom.

High Pass mode also enables a simple top box and subwoofer combination to be created without the need for an external crossover. Two Low Passsetting options on the subwoofer amplifiers fully optimise integration with the Full Range units.

Description

Powered Subwoofers

Tech Brief PowerVS 10BP PowerVS 15BP

069

Driver Complement Freq Range (-10 dB)Sensitivity (1 W @ 1 m)Rated Max SPLRec. Amp PowerWeightDimensions (HxWxD)

Overview

250 mm (10’) Vented bandpass 380 mm (15”) Vented bandpass39 Hz - 110 Hz 36 Hz - 116 Hz95 dB anechoic (2.83 V @ 8 ohms) 96 dB anechoic (2.83 V @ 8 ohms)118 dB (average) 124 dB (peak) 124 dB (average) 130 dB (peak)- -18 kg 30 kg 355 mm x 385 mm x 590 mm 665 mm x 440 mm x 440 mm (14” x 15.2” x 23.2”) (26.2” x 17.3” x 17.3”)


070

VNET Subwoofers

Incorporating a digital electronics section in conjunction with efficient and reliable switched modepower supply Class D power modules; these network enabled subwoofer enclosuresare specifically engineered tocompliment Tannoy's VNETloudspeaker system.

The Tannoy VNET speaker range incorporate Dual Channel Class D power modules with switched mode power supplies. These very efficient and reliable designs operate at a low temperature, even when driven at very high power levels. The digital electronics section uses a third generation 96 kHz DSP chipset; thewhole system is designed to operate at a low temperature, even when driven at very high power levels.

Installation, using a free network topology layout – daisy chain, star configuration or any combination of both, is made simple using software driven system commissioning, while ongoing venue network control and drive unit diagnostics all done in real time using this intuitive package.

Description

Tech Brief VNET 15BP VNET 15HL VNET 18DR380 mm (15”) Vented bandpass 380 mm (15”) Horn loaded 458 mm (18”) Direct radiating36 Hz - 116 Hz 60 Hz - 300 Hz 27 Hz - 240 Hz96 dB anechoic (2.83 V @ 8 ohms) 101 dB anechoic (2.83 V @ 8 ohms) 99 dB anechoic (2.83 V @ 8 ohms)124 dB (average) 130 dB (peak) 130 dB (average) 136 dB (peak) 130 dB (average) 136 dB (peak) 600 W 800 W 1200 W31 kg 44 kg 55 kg 665 mm x 440 mm x 440 mm 578 mm x 555 mm x 650 mm 710 mm x 652.40 mm x 555 mm (26.2” x 17.3” x 17.3”) (22.8” x 21.9” x 25.6”) (28” x 25.7” x 21.9”)

DescriptionThese versatile, no compromise, all-purpose large format VNET (powered) versions of the VS 218DR and VS 215HL subwoofers are designed for themost demanding professional applications. The direct radiating VNET 218DR and horn loaded VNET 215HL offer exceptional output, high reliability andoutstanding sonic performance providing low and VLF reproduction to complement any high SPL full range powered loudspeaker system, includingTannoy’s VQ NET.

Extending the frequency response of the system to below 30 Hz makes these devices ideal for low frequency effects in high energy clubs, large corporate AV systems, stadiums, live concert halls, theatres, movie theatres and cinemas, large houses of worship and open-air venues.

Tech Brief VNET 215HL VNET 218DR2 x 380 mm (15”) Horn loaded 2 x 458 mm (18”) Horn loaded40 Hz - 450 Hz 24 Hz - 1.5 kHz140 dB (average) 146 dB (peak) 137 dB (average) 143 dB (peak)2500 W 2500 W112 kg 110 kg

700 mm x 1050 mm x 850 mm 700 mm x 1050 mm x 850 mm

(27.6” x 41.3” x 33.5”) (27.6” x 41.3” x 33.5”)

Driver Complement Freq Range (-10 dB)Sensitivity (1 W @1 m)Rated Max SPLPower RatingWeightDimensions (HxWxD)

Driver Complement Freq Range (-10 dB)Rated Max SPLPower Rating WeightDimensions (HxWxD)

Overview


No maintenance of Tannoy products is necessary.

All of our products have been produced and tested with care andprecision to give first-class service.

All passive components are guaranteed for a period of five years fromthe date of purchase from an authorised Tannoy dealer subject to theabsence or evidence of misuse, overload, or accidental damage.

All active and electronic components are guaranteed for a period of oneyear from the date of purchase from an authorised Tannoy dealersubject to the absence of, or evidence of, misuse, overload oraccidental damage.

If at any time during this warranty period the equipment proves to bedefective for any reason other than accident, misuse, neglect,unauthorised modification or fair wear and tear, we will repair any suchmanufacturing defect or, at our option, replace it without charge forlabour, parts or return carriage.

If you suspect a problem with a Tannoy product then, in the firstinstance, discuss it with your Tannoy dealer. If you require furtherassistance then we ask that you deal directly with your local Tannoy distributor.

Note:DO NOT SHIP ANY PRODUCT TO TANNOY WITHOUT PREVIOUSAUTHORISATION.

This warranty in no way affects your statutory rights.

WARRANTY STATEMENT

SPECIFICATION NOTES

The specifications in the professional section of this catalogue areanotated as follows:

1. Average over stated bandwidth. Measured at 1 metre on axis.

2. Unweighted pink noise input, measured at 1 metre in an anechoic chamber. A full range of measurements, performance data, and Ease™ Data can be downloaded from www.tannoy.com

DEVELOPMENT POLICY

Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods willalways equal or exceed the published specifications, which Tannoyreserves the right to alter without prior notification.

071

Front Cover aw:Layout 1 12/1/12 16:09 Page 2

Professional full range cataloguetannoy.com

6483

112

9 / 0

112

professionalrange

catalogue2011/12

tannoy.com

Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: [email protected]

TCGI (ROW sales) T: 00 45 8742 7000 E: [email protected]

TCGA (Americas sales) T: 00 1 (519) 745 1158 E: [email protected]

Tannoy Middle East T: 00 971 (04) 4401208 E: [email protected]

Tannoy adopts a policy of continuous improvement and product specification is subject to change.

Dual Concentric, Integrip, Q-Centric Waveguide, VNET, PowerDual, Point Source Waveguide and ICT

are trademarks of Tannoy Limited. IntelliDrive Energy Efficient Amplifier is a trademark of Lab.gruppen

AB.All other trademarks remain the property of their respective owners. Copyright (c) 2011 Tannoy

Limited. All rights reserved.

Front Cover aw:Layout 1 12/1/12 16:09 Page 1

Tannoy Professional Catalogue

Documents

Transcript of Tannoy Professional Catalogue