TANKS - europages.com€¦ · Storage tanks are used for storing products or semi-finished...
Transcript of TANKS - europages.com€¦ · Storage tanks are used for storing products or semi-finished...
-
TANKS
B&P Engineering o�ers a wide selection of tanks for food and chemical industry.Implementation of the most recent tech-nologies in manufacturing guarantees high quality of our products.Tanks, according to customer’s require-ments, are manufactured in conformity with the following standards and attesta-tions: PED 97/23/WE, AD 2000, ATEX, CODAP, UDT, GOST, GMP, TÜV.
-
PROCESS TANKS
Process Tanks
Process tanks are used as buffering, mixing or equalizing tanks in a production cycle. B&P Engineering
offers process tanks with conic bottoms, deep pressed bottoms, heating or cooling jacket and depectini-
sation tanks.
Depectinisation tanks are used in the process of depectinisation of pasteurised juice after the first section
of the evaporative section.
Process tanks with heating or cooling jacket are used for: maintaining the medium temperature, increasing
the medium temperature and decreasing the medium temperature.
They are perfect for food industry and can be used in for growing yeast, production of gelatine, mixing of
purifying agents, maintaining constant temperature of sugar and glucose solution or as loading tanks.
T e c h n i c a l d a t a
Material: 1.4301, 1.4404, as required by the customer
Surface: I I Ic, I I Id, etched, polished, electrobuffed, grained, ball peened
Capacity: in standard up to 100 000 litres or more, as required by the customer
Diameter: up to 4 200 mm or more, made to special order
Arrangement: vertical or horizontal
Insulating layer: coated metal plate, rustproof, grained or troughed
O p t i o n s
• Ell ipsoidal, conic, bucket, flat bottoms
• Tank insulation (e.g. mineral wool, EPS, thermaflex)
• Side or top mixers in various versions
• Heating or cooling jacket (pil low plate, double or triple jacket)
• Tank always full with accessories (floating bottom)
• Manual or automatic control
-
STORAGE TANKS
B&P Engineering Sp. z o.o. Lubomirskich 1E, 37-200 Przeworsk, Poland Tel.: +48 (16) 649 00 98, Fax: +48 (16) 649 00 99 [email protected] www.engineering-bp.com
Storage Tanks
Storage tanks are used for storing products or semi-finished products. They can be used for the following
media: water, juice, concentrate, beverages, wine, milk and milk products and many more. B&P Engineer-
ing offers aseptic storage tanks, with flat bottom and with conic or spinned bottom.
O p t i o n s
• Aseptic storage tanks (with proper accessories)
• Ell ipsoidal, conic, bucket, flat bottoms
• Tank insulation (e.g. mineral wool, EPS, thermaflex)
• Side or top mixers in various versions
• Tank always full with accessories (floating bottom)
• Manual or automatic control
A d v a n t a g e s
• Optimum thickness of walls
• Redrawn access door, without welded joints
• Perfect finish of internal and external welded joints
• Easy to clean
T e c h n i c a l d a t a
Material: 1.4301, 1.4404, as required by the customer
Surface: I I Ic, I I Id, etched, polished, electrobuffed, grained, ball peened
Capacity: in standard up to 100 000 litres or more, as required by the customer
Diameter: up to 4 200 mm or more, made to special order
Arrangement: vertical or horizontal
-
ALCOHOL TANKS
Alcohol Tanks
Alcohol tanks are intended for storing semi-finished products in the process of production of rectified spirit
and for storing low wine and rectified spirit. Tanks type is approved by the Central Office of Measures and
meets the requirements included in the regulation of the Minister of Economy of 22 January 2008 on metro-
logical requirement to be met by measurement tanks.
O p t i o n s
• Ell ipsoidal, conic, bucket bottoms
• Manual or automatic control
A d v a n t a g e s
• Optimal thickness of walls
• I Individual design
• Perfect finish of internal and external welded joints
• Easy to clean
T e c h n i c a l d a t a
Material: 1.4301, 1.4404, as required by the customer
Capacity: up to 160 000 litres
Diameter: up to 4 200 mm or more, made to special order
Arrangement: vertical or horizontal
Measuring accessories: temperature and pressure sensors, maximum capacity sensor, flame arresters
with breather valve, l iquid meter with metal scale
-
SPECIAL TANKS
Special Tanks
B&P offers a wide selection of tanks for pharmaceutical and
cosmetic industry. Implementation of the most recent tech-
nologies in manufacturing guarantees high quality of our prod-
ucts. Out tanks are manufactured in conformity with the follow-
ing standards and attestations: PED 97/23/WE, AD 2000, ATEX,
UDT, TÜV, GOST, GMP.
We manufacture vacuum autoclaves, pressureless reactors,
homogenising agitators, process agitators, fermenters, storage
tanks for pharmaceutical preparations and cosmetic products,
stationary and mobile CIP washing stations, controlled manu-
ally or automatically.
T e c h n i c a l d a t a
Tanks: pressureless, pressurised, stationary, mobile
Material: 1.4301, 1.4541, 1.4571
Surface: I I Ic, I I Id, etched, polished, electrobuffed,
grained, ball peened
Polishing: contact with Ra 0.2 productexternal surface
Ra 0.6, Ra 1.6
Mixers: backward, anchor-type, screw-type,
magnetic, cellular
Connections: aseptic DIN 11864, TC, flanged, threaded
Sealing: in accordance with the FDA
-
Lubomirskich 1E, 37-200 Przeworsk, Poland
Tel.: +48 (16) 649 00 98, Fax: +48 (16) 649 00 99
[email protected] www.engineering-bp.com
B&P Engineering Sp. z o.o.