taking premium hot runner technology to a higher level · 2020. 8. 9. · taking premium hot runner...
Transcript of taking premium hot runner technology to a higher level · 2020. 8. 9. · taking premium hot runner...
-
© 2015 Milacron LLC. All Rights Reserved. Mold-Masters® and the Mold-Masters logo are trademarks of Milacron LLC and/or its affiliates Mold-Masters (2007) Limited, DME Company LLC, and Cimcool Fluid Technology (collectively, “Milacron”). E7315-1
taking premium hot runner technology to a higher level
Stainless Steel iFlow Manifolds Our proprietary 2-piece brazed manifold technology with endless flow path options and runner shapes. The runners are carefully milled and polished, with no sharp corners or dead spots, minimizing degradation and contamination. Thinner manifolds reduce overall stack height and minimize energy consumption. Stainless steel material is used to provide corrosion and chemical resistance. Cast-in heaters improve temperature uniformity versus pressed in heaters.
Summit-Series is the new premium, no compromise brand of stainless steel hot runner designed for demanding Medical, Personal Care and Technical applications.
• Summit-Series is the ideal melt delivery solution for resins requiring the best in precise thermal control, corrosion resistance and chemical compatibility.
• It is available in our Femto, Pico and Centi sizes, includes thermal and valve gating solutions as well as premium options for valve pin control.
Premium Valve Gate Options - Proven Accu-Valve Technology The patented V-Guide™ system guides the pin through the manifold area. The innovative guiding mechanism in the tip, which requires no disengagement or direct reliance on cavity steel for pin alignment, maximizes pin and cavity life and optimizes gate quality.
CXMX
E-Type F-Type
Available Gating Styles
Valve gating options• Accu-Valve MX• Accu-Valve CX • Bi-Metallic C-Valve• Hot Valve
Thermal gating options• E-Type Torpedo• F-Type Torpedo• Bi-Metallic C-Sprue• Hot Sprue (+extended)
-
© 2015 Milacron LLC. All Rights Reserved. Mold-Masters® and the Mold-Masters logo are trademarks of Milacron LLC and/or its affiliates Mold-Masters (2007) Limited, DME Company LLC, and Cimcool Fluid Technology (collectively, “Milacron”). E7315-1
taking premium hot runner technology to a higher level
Available Valve Gate Actuation Option: SeVG
• SeVG (Servo Electric Valve Gate)• Clean room friendly and energy efficient• Provides individual control of each gate• Sequencing, Speed, Positioning, Shut-off• Zero response time variation• Touchscreen SeVG controller (see photo above)
Available Valve Gate Actuation Option: E-Drive
• Clean room friendly & energy efficient• Servo driven synchronization of all valve pins• Variable speed, stroke and acceleration• High torque with precision control• Electro-mechanical actuation eliminates friction, lubrication or loss of
energy versus sliding movement systems• Applicable for 2 to 128 cavities• Reduced maintenance costs due to extended maintenance cycles
EcoDisk included for thermal gate systems
• Reduces manifold power consumption up to 20%• Ceramic pad design increases thermal stability
Thermal Profile ComparisonThe Summit-Series nozzle provides a clear melt quality advantage for temperature sensitive materials and applications that demand precise thermal control.
The above graph shows the excellent thermal profile of the Summit-Series nozzle