Rental Tool Division

P.O. Box 16990

Lake Charles, LA 70616

Lake Charles, LA Office

(337) 436-0426 • (800) 259-4046

FAX (337) 436-0276

Shreveport, LA Office

(318) 425-0318

FAX (318) 425-0338

TADLOCK PIPE

TADLOCK PIPE

We at Tadlock Pipe & Rentals, Inc., feel it is our responsibility

to provide you with the most modern equipment, maintained in the

best possible manner. We are able to offer you the largest and one

of the most modern inventories available in the industry. For your

protection, our pipe has been repaired, if necessary, inspected

and thoroughly tested before we send it to you.

We sincerely solicit your inquiries on tubulars not shown

in this catalog as we are continually adding to our inventories and

“If we don’t have it, We will get it”.

Thank you for your confidence in us and our tubulars. We

sincerely appreciate your business.

TADLOCK PIPE & RENTALS, INC.

TADLOCK PIPE

TADLOCK PIPE

TERMS AND CONDITIONS UNDER WHICH DRILL PIPE, TOOLS AND OTHER EQUIPMENT ARE RENTED AND SOLD —

1. TERM OF AGREEMENT: The rental and term of this lease begins when the item leaves the Lessor’s yard and the rental continues until the item is returned thereto and accepted by an authorized Lessor.

2. RENTAL CHARGES: Lessee will pay lessor, and Lessor will accept as payment from Lessee, as rental for leased items, the rental charges specified in Lessor’s scheduled rental rates. All prices are subject to change without notice.Lessee agrees to pay rent when due irrespective of any claims, demands, set-offs, defenses, actions, suits or proceedings that it may have or assert against Lessor or any supplier or manufacturer of any items.Scheduled rental rates for drill pipe apply for workover or deepening job inside casing only. Apply for rate when drill pipe is needed for drilling well top to bottom. If it is necessary to subrent equipment from third parties at a higher rate, their rate will be charged. Standby rates will be charged on individual tools at current rates.

3. TRANSPORTATION CHARGES: All transportation charges including freight, rail or air express and drayage charges must be paid by the Lessee.

4. WELL CONDITIONS: Well conditions which prevent satisfactory operation of the item do not relieve Lessee of responsibility for rental charges.

5. TERMS OF PAYMENT: All rental charges or other payments due are to become due hereunder shall be due and payable in Lake Charles, Louisiana Calcasieu Parish, on the 30th day following the date of the invoice. The maximum legal rate of interest is applicable to unpaid invoices commencing 60 days after the due dates thereof. If the invoiced amount is not paid when due and the account is placed in the hands of an attorney for collection or if suit is filed to collect the account or any part thereof, Lessee (or purchaser as the case may be) agrees additionally to pay all costs and a reasonable sum as attorneys fees.

6. RETURN OF EQUIPMENT: Lessee warrants, upon acceptance of delivery of any item, that it is in proper operating order and appearance and agrees to return such equipment to the Lessor in as good condition as it was at the effective date of the lease, ordinary wear and tear from a reasonable use thereof and damage by public enemy alone excepted.

7. DAMAGED OR LOST EQUIPMENT: All items lost or damaged beyond repair will be paid for by the Lessee at the current catalog price (replacement cost new). Lessee shall have the option to secure and pay for all repairs necessary to restore any damaged but repairable item to its original condition or to appoint

TADLOCK PIPE

Lessor agent for the sole purpose of securing the repairs necessary on behalf of Lessee and to pay Lessor for said repairs in accordance with the Terms of Payment set forth herein. Accrued rental charges cannot be applied against the purchase price or cost of repairs of such damaged or lost equipment. Equipment billed as a sale after having been damaged beyond repair will be held for the purchaser for sixty (60) days and if unclaimed will be sold by Lessor.

8. DEFAULT: If Lessee breaches any of the terms of conditions hereof or if Lessee becomes insolvent, bankrupt or his financial responsibility becomes impaired, or if the equipment or any part of it be abused , illegally used or misused, or whenever Lessor deems the rentals of equipment insecure, all rental charges and / or repair charges and / or other claims or indebtedness arising hereunder shall at the option of Lessor and without legal process any premises where equipment may be and take possession thereof without being liable to any suit or action or proceeding by Lessee. Upon Lessor’s retaking possession of the said equipment the rental agreement shall terminate but said termination shall be without prejudice to any right or claim for arrears of rental, if any, or for damages.

9. EXCLUSION OF LIABILITY: All equipment is furnished and leased to Lessee at Lessee’s sole risk and expense. Lessor assumes no liability of any type, nature or degree, to any source for equipment leased to Lessee. Lessee shall be solely responsible for damages, injuries, deaths, delays or losses or any kind or nature, from any source, occasioned by or related to the use of said equipment, whether used or operated by Lessee, its agents, employees, or subcontractors and their employees or whether resulting from the acts or omissions of Lessor or any of its agents, servants, employees, or otherwise.

10. INDEMNITY BY LESSEE: Lessee agrees to protect, indemnity and hold harmless the Lessor, its officers, agents and employees, from every kind and character of damages, losses, expenses, demands, claims and causes of action arising in favor of Lessee, its officers, agents, employees or any other persons , firm or corporation whatsoever, on account of personal injuries, death claims or damages to property arising from any cause whatsoever growing out of or incident to such equipment rental whether such injuries, death or damage result from or are claimed to have resulted from the concurrent or sole negligence of the Lessor, the Lessee, or Lessee’s subcontractors, including the officers, agents or employees of the above. Lessee at its own expense shall defend any suit or action brought against the Lessor based on any such alleged injury, death or damage, and shall pay all damages, cost and expenses, including attorney’s fees in connection therewith or in any manner resulting therefrom.

11. EXAMINATION AND INSPECTION: Lessee agrees to afford Lessor access to the leased equipment for the purposes of examination and inspection at all reasonable times during the term hereof.

TADLOCK PIPE

12. DISCLAIMER: LESSOR MAKES NO REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH RESPECT TO DRILL PIPE, TOOLS OR OTHER EQUIPMENT: LESSEE UNDERSTANDS AND AGREES THAT NO WARRANTY IS TO BE IMPLIED WITH RESPECT TO THE CONDITION OF THE EQUIPMENT, ITS MERCHANTABILITY, THE FITNESS OF THE EQUIPMENT FOR A PARTICULAR PURPOSE, OR WITH RESPECT TO INFRINGEMENT OR THE LIKE THE LESSOR SHALL NOT IN ANY EVENT BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES. NOTHING HEREIN CONTAINED SHALL BE CONSTRUED AS DEPRIVING THE LESSEE OF WHATEVER RIGHTS, IF ANY, LESSEE MAY HAVE AGAINST THE SUPPLIER OR MANUFACTURER OF THE EQUIPMENT.

A charge of 25% will be added to listed prices when any rental item is ordered and treated for H2S (Sour Gas) service.

TADLOCK PIPE

TADLOCK PIPE

THREAD DETAILS API REGULAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 UNION TOOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 API FULL HOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 API INTERNAL FLUSH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 API NUMBERED CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 AMERICAN PAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 AMERICAN OPEN HOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 CABLE TOOL JOINTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 GULF TUBING JOINTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 HYDRIL JOINTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 HUGHES DOUBLE STREAMLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 HUGHES H-90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12 HUGHES SLIM HOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 HUGHES SLIMLINE H-90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 HUGHES XTRA HOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 HUGHES EXTERNAL FLUSH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 HUMBLE “X” TYPE JOINTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 REED EXTERNAL FLUSH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 REED DOUBLE STREAMLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 REED WIDE OPEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 REED FULL HOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 REED XTRA HOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 SUCKER ROD (INCLUDES STRENGTH DATA) . . . . . . . . . . . . . . . . . . 22-23SMALL DIAMETER TOOL JOINTS– STRENGTH DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24LARGE DIAMETER TOOL JOINTS– STRENGTH DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25MINIMUM/MAXIMUM TOOL JOINT DIMENSIONS . . . . . . . . . . . . . . . . . . . 26“X” SERIES DRILL ROD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27“W” SERIES DRILL ROD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

TOOL JOINTS

TADLOCK PIPE

SIZE

3

4

5

6

A

(IN.)

3-3/4

4-1/4

4-5/8

5

B

(IN.)

4-1/4

5-3/4

6-3/4

7-3/4

C

(IN.)

3-1/4

4-1/2

5-33/64

6

D

(IN.)

2-5/16

3-51/64

4-21/64

5-5/32

E

(IN.)

3-5/16

4-9/16

5-37/64

6-1/16

F

(IN.)

4-1/8

4-5/8

5-1/8

5-3/8

G

(IN.)

1-1/2

2-1/4

2-3/4

3-1/2

H

TPI

5

5

4

4

K

TPF

3

2

3

2

SIZE

1-1/4

4-1/2

6-5/8

7-5/8

8-5/8

NOTES

NON-API

* 5-3/4 OPTIONAL O.D.

THREADED PORTION SAME AS 5-1/2 UNION TOOL FULL-HOLE

OBSOLETE API CONNECTION

OBSOLETE API CONNECTION

SIZE

1-1/4

2-3/8

2-7/8

3-1/2

4-1/2

5-1/2

6-5/8

7-5/8

8-5/8

A

(IN.)

2-5/8

3

3-1/2

3-3/4

4-1/4

4-3/4

5

5-1/4

5-3/8

B

(IN.)

2-3/16

3-1/8

3-3/4

4-1/4

5-1/2

6-3/4

7-3/4

8-7/8

10

C

(IN.)

1-23/32

2-5/8

3

3-1/2

4-5/8

5-33/64

6

7

7-61/64

D

(IN.)

1-5/16

1-7/8

2-1/8

1-9/16

3-9/16

4-21/64

5-5/32

5-11/16

6-37/64

E

(IN.)

1-3/4

2-11/16

3-1/16

3-9/16

4-11/16

5-37/64

6-1/16

7-3/32

8-3/64

F

(IN.)

3

3-3/8

3-7/8

4-1/8

4-5/8

5-1/8

5-3/8

5-5/8

5-3/4

G

(IN.)

5/8

1

1-1/4

1-1/2

2-1/4

2-3/4

3-1/2

4

4-3/4

H

TPI

7

5

5

5

5

4

4

4

4

K

TPF

2

3

3

3

3

3

2

3

3

1-1

API REGULAR THREAD DIMENSIONS

UNION TOOL REGULAR(OBSOLETE CONNECTIONS)

TADLOCK PIPE

SIZE

2-7/8

3-1/2

4

4-1/2

5-1/2

6-5/8

A

(IN.)

3-1/2

3-3/4

4-1/2

4

5

5

B

(IN.)

4-1/4

4-5/8

5-1/4

5-3/4

7

8

C

(IN.)

3-5/8

4

4-9/32

4-51/64

5-53/64

6-3/4

D

(IN.)

2-3/4

3-1/16

3-17/32

3-51/64

5

5-59/64

E

(IN.)

3-11/16

4-3/64

4-11/32

4-7/8

5-29/32

6-27/32

F

(IN.)

3-9/16

4-3/8

5-1/8

4-5/8

5-5/8

5-5/8

G

(IN.)

2-1/8

2-2/8 †

2-13/16

3

4

5

H

T.P.I.

5

5

4*

5

4

4

K

T.P.F.

3

3

2

3

2

2

1-2

SIZE

2-7/8

3-1/2

4

NOTES

NOT API STANDARD

† ID CHANGED FROM 2-7/16, MAY 1979 (API)

THREADED PORTION AND THREAD FORM SAME AS 4-1/2 REED DOUBLE

STREAMLINE AND NC40.

API FULL HOLE

* THREAD FORM SAME AS API I.F. JOINT

TADLOCK PIPE

1-3

SIZE

2-3/8

2-7/8

3-1/2

4

4-1/2

5-1/2

A

(IN.)

3

3-1/2

4

4-1/2

4-1/2

5

B

(IN.)

3-3/8

4-1/8

4-3/4

5-3/4

6-3/8

7-3/8

C

(IN.)

2-7/8

3-25/64

4-1/64

4-53/64

5-1/4

6-25/64

D

(IN.)

2-3/8

2-13/16

3-11/32

4-5/64

4-1/2

5-9/16

E

(IN.)

2-15/16

3-29/64

4-5/64

4-29/32

5-5/16

6-29/64

F

(IN.)

3-5/8

4-1/8

4-5/8

5-1/8

5-1/8

5-5/8

G

(IN.)

1-3/4

2-1/8

2-11/16

3-1/4

3-3/4

4-13/16

H

T.P.I.

4

4

4

4

4

4

K

T.P.F.

2

2

2

2

2

2

SIZE

2-3/8

2-7/8

3-1/2

4

4-1/2

5-1/2

NOTES

THREADED PORTION SAME AS 2-7/8 HUGHES SLIM HOLE

THREADED PORTION SAME AS 3-1/2 HUGHES SLIM HOLE

THREADED PORTION SAME AS 4-1/2 HUGHES SLIM HOLE

THREADED PORTION SAME AS 4-1/2 HUGHES XTRA HOLE, 5” REED DOUBLE

STREAMLINE, 4-1/2 REED XTRA HOLE AND NC46

THREADED PORTION SAME AS 5-1/2 REED DOUBLE STREAMLINE, 5” HUGHES

XTRA HOLE, 5 REED XTRA HOLE AND NC50

OBOSLETE API CONNECTION

API INTERNAL FLUSH

TADLOCK PIPE

1-4

SIZE

NC23

NC26

NC31

NC35

NC38

NC40

NC44

NC46

NC50

NC56

NC61

NC70

NC77

A

(IN.)

3

3

3-1/2

3-3/4

4

4-1/2

4-1/2

4-1/2

4-1/2

5

5-1/2

6

6-1/2

B

(IN.)

3-1/8

3-3/8

4-1/8

4-3/4

4-3/4

5-1/4

5-3/4

6

6-3/8

7

8

9-1/4

10-3/4

C

(IN.)

2.563

2.876

3.391

3.739

4.016

4.280

4.625

4.834

5.250

5.876

6.438

7.313

8.000

D

(IN.)

2.063

2.376

2.808

3.114

3.349

3.530

3.875

4.084

4.500

4.626

5.063

5.813

6.376

E

(IN.)

2-5/8

2-15/16

3-29/64

3-13/16

4-5/64

4-11/32

4-11/16

4-29/32

5-5/16

5-15/16

6-1/2

7-3/8

8-1/16

F

(IN.)

3-5/8

3-5/8

4-1/8

4-3/8

4-5/8

5-1/8

5-1/8

5-1/8

5-1/8

5-5/8

6-1/8

6-5/8

7-1/8

G

(IN.)

1-1/4

1-3/4

2-1/8

2-1/4

2-11/16

2-13/16

3-1/8

3-1/4

3-3/4

3-3/4

4

4-1/2

4-3/4

H

T.P.I.

4

4

4

4

4

4

4

4

4

4

4

4

4

K

T.P.F.

2

2

2

2

2

2

2

2

2

3

3

3

3

API NUMBERED CONNECTIONSO.D.’S AND I.D.’S LISTED DENOTE API STANDARD FOR

DRILL PIPE CONNECTIONS

SIZE

NC23

NC26

NC31

NC38

NC40

NC46

NC50

NC77

NOTES

DIMENSIONS TENTATIVE

INTERCHANGEABLE WITH 2-3/8 API I.F.

INTERCHANGEABLE WITH 2-7/8 API I.F.

INTERCHANGEABLE WITH 3-1/2 API I.F.

INTERCHANGEABLE WITH 4 API F.H.

INTERCHANGEABLE WITH 4 API I.F.

INTERCHANGEABLE WITH 4-1/2 API I.F.

DIMENSIONS TENTATIVE

TADLOCK PIPE

SIZE

2-3/8

2-7/8

3-1/2

A

(IN.)

2-3/8

2-3/8

3-1/4

B

(IN.)

2-7/8

3-1/8

3-3/4

C

(IN.)

2-23/64

2-17/32

3-3/64

D

(IN.)

2-1/16

2-15/64

2-41/64

E

(IN.)

2-27/64

2-19/32

3-7/64

F

(IN.)

2-1/2

2-1/2

3-3/8

G

(IN.)

1-3/8

1-1/2

2

H

T.P.I.

4

4

4

J

(IN.)

2-5/16

2-31/64

3

K

T.P.F.

1-1/2

1-1/2

1-1/2

1-5

AMERICAN P.A.C.

TADLOCK PIPE

SIZE

2-3/8

2-7/8

3-1/2

4

A

(IN.)

2-3/8

2-7/8

3-1/4

4

B

(IN.)

3-1/4

3-7/8

4-3/4

5-1/2

C

(IN.)

2-3/4

3-9/64

3-57/64

4-37/64

D

(IN.)

2-29/64

2-25/32

3-31/64

4-5/64

E

(IN.)

2-13/16

3-7/32

3-61/64

4-41/64

F

(IN.)

2-1/2

3

3-3/8

4-1/8

G

(IN.)

1-13/16

2.151

2-11/16

3-1/4

H

T.P.I.

4

4

4

4

J

(IN.)

2-45/64

3-7/64

3-27/32

4-17/32

K

T.P.F.

1-1/2

1-1/2

1-1/2

1-1/2

Y

(IN.)

3/8

3/8

5/8

5/8

1-6

AMERICAN OPEN HOLE

SIZE

2-3/8

2-7/8

3-1/2

4

4-1/2

A

(IN.)

2-3/8

2-1/2

3-1/4

3-1/2

3-3/4

B

(IN.)

3-1/8

3-3/4

4-1/2

5-1/4

5-3/4

C

(IN.)

2-3/4

3-9/64

3-57/64

4-37/64

4-59/64

D

(IN.)

2-29/64

2-53/64

3-31/64

4-9/64

4-29/64

E

(IN.)

2-13/16

3-7/32

3-61/64

4-41/64

4-63/64

F

(IN.)

2-1/2

3

3-3/8

4-1/8

3-7/8

G

(IN.)

1.995

2.441

2.992

3.476

3.958

H

T.P.I.

4

4

4

4

4

J

(IN.)

2-45/64

3-7/64

3-27/32

4-17/32

4-7/8

K

T.P.F.

1-1/2

1-1/2

1-1/2

1-1/2

1-1/2

Y

(IN.)

3/8

3/8

5/8

5/8

5/8

AMERICAN OPEN HOLE LIGHTWEIGHT AND TUBING

TADLOCK PIPE

1-7

SIZE

7/8 X 1-1/4-10

7/8 X 1-1/2-10

1 X 1-1/2-8

1-1/8 X 1-3/4-8

1-1/8 X 1-3/4-8

1-1/2 X 2-1/4-8

1-5/8 X 2-1/2-8

1-5/8 X 2-5/8-7

1-3/4 X 2-3/4-8

2 X 3-7

2 X 3-7

2-1/4 X 3-1/4-7

2-1/4 X 3-1/4-7

2-1/2 X 3-1/2-7

2-3/4 X 3-3/4-7

3 X 4-7

3 X 4-7

3-1/4 X 4-1/4-7

3-1/2 X 4-1/2-7

4 X 5-7

4 X 5-7

4 X 5-1/2-7

4-1/4 X 6-7

A

(IN.)

2-1/4

2-5/8

2

2-1/2

2-1/2

3

3-1/2

3-1/2

3-1/2

4

4

4

4

4-1/4

4-1/2

4-3/4

4-3/4

5

5-1/2

5-1/2

5

6-1/2

7

B

(IN.)

1-7/8

2-1/4

2

2-1/2

2-1/2

3-1/8

3-1/2

3-5/8

3-3/4

4-1/4

4-1/4

4-1/2

4-1/2

5

5-1/4

6

6

6-1/4

6-1/2

7

7

7-1/2

8-1/4

C

(IN.)

1-5/16

1-19/32

1-31/64

1-47/64

1-49/64

2-15/64

2-1/2

2-43/64

2-3/4

3-7/64

3-1/16

3-5/16

3-9/32

3-37/64

3-13/16

4

4

4-19/64

4-21/32

5-1/16

5-1/16

5-1/2

6

D

(IN.)

15/16

27/32

61/64

1-7/64

1-7/32

1-31/64

1-5/8

1-51/64

1-3/4

2-7/64

2

2-17/64

2-9/32

2-33/64

2-11/16

2-13/16

2-47/64

3-3/64

3-9/32

3-11/16

3-13/16

3-7/8

4-1/4

H

T.P.I.

10

10

8

8

8

8

8

7

8

7

7

7

7

7

7

7

7

7

7

7

7

7

7

K

T.P.F.

2

3-7/16

3

3

2-5/8

3

3

3

3-7/16

3

3-3/16

3-1/8

3

3

3

3

3-3/16

3

3

3

3

3

3

U

(IN.)

3

3-3/8

2-3/4

3-1/4

3-1/4

3-3/4

4-1/4

4-1/4

4-1/4

4-3/4

4-3/4

4-3/4

4-3/4

5

5-1/4

5-1/2

5-1/2

5-3/4

6-1/4

6-1/4

5-3/4

7-1/4

7-3/4

X

(IN.)

1-15/16

2-3/8

2-1/16

2-5/8

2-5/8

3-1/4

3-5/8

3-3/4

3-7/8

4-3/8

4-3/8

4-3/4

4-3/4

5-1/4

5-1/2

6-1/4

6-1/4

6-1/2

6-3/4

7-3/8

7-3/8

7-7/8

8-5/8

CABLE TOOL JOINTS

TADLOCK PIPE

1-8

SIZE

A-200

2-3/8

A-250

2-7/8

A-300

3

A

(IN.)

B

(IN.)

C

(IN.)

D

(IN.)

E

(IN.)

F

(IN.)

G

(IN.)

H

T.P.I.

K

T.P.F.

GULF TUBING TOOL JOINTS

2-3/8

2-3/8

2-3/4

3.060

3.668

4.500

2.720

3.294

3.978

2.423

2.997

3.634

2.739

3.314

4.000

2-3/4

2-3/4

3

1.995

2.441

2.992

4

4

4

1-1/2

1-1/2

1-1/2

TADLOCK PIPE

1-9

HYDRIL JOINTS

*OBSOLETE HYDRIL CONNECTION

TYPE

IF

F

EIU

SIZE

2-3/8

2-7/8

2-7/8

3-1/2

3-1/2

4-1/2

4-1/2

*5

2-3/8

2-7/8

3-1/2

4

4-1/2

*5

5-1/2

*6-5/8

3-1/2

4

4-1/2

5-1/2

*6-5/8

WT.

LBS/FT

6.65

10.4

11.8

13.3

15.5

16.6

20.0

20.5

6.65

10.4

13.3

14.0

16.6

19.5

21.9

25.2

13.3

14.0

20.0

21.9

25.2

A

(IN.)

3-15/16

3-57/64

3-57/64

3-61/64

3-61/64

4

4

4-23/32

2-5/8

3-21/32

4-1/16

3-59/64

3-61/64

4-5/16

4-1/4

5-5/16

4-1/4

4-5/16

4-7/16

5-1/2

5-1/2

B

(IN.)

3-3/8

3-7/8

3-7/8

4-1/2

4-1/2

6

6

6-5/8

2-3/8

2-7/8

3-1/2

4-1/16

4-1/2

5

5-9/16

6-5/8

4-5/8

5-9/16

5-3/4

7

8

C

(IN.)

2-13/16

3-3/16

3-3/16

3-27/32

3-27/32

5-13/64

5-13/64

5-25/32

1-59/64

2-23/64

2-13/16

3-5/16

3-27/32

4-3/16

4-21/32

5-11/16

3-47/64

4-21/64

4-47/64

5-53/64

6-7/8

D

(IN.)

2-21/64

2-45/64

2-45/64

3-23/64

3-23/64

4-35/64

4-35/64

5-1/64

1-43/64

1-29/32

2-21/64

2-55/64

3-23/64

3-35/64

4-1/64

4-29/32

3-17/64

4-1/64

4-3/32

5-1/16

6-7/64

E

(IN.)

2-13/16

3-3/16

3-3/16

3-27/32

3-27/32

5-7/32

5-7/32

5-51/64

1-15/16

2-3/8

2-13/16

3-11/32

3-27/32

4-13/64

4-43/64

5-45/64

3-3/4

4-43/64

4-3/4

5-27/32

6-57/64

G

(IN.)

1-3/4

2-7/64

2

2-3/4

2-9/16

3-3/4

3-3/4

4-3/16

1

1-1/16

1-1/2

2

2-3/16

2-5/16

2-3/4

3-1/2

2-7/16

3-1/8

3-5/32

4

5

H

T.P.I.

3

3

3

3

3

3

3

2

4

4

3

3

3

3

3

2

3

3

3

2

2

K

T.P.F.

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

U

(IN.)

3-59/64

3-59/64

3-59/64

3-31/32

3-31/32

4-1/64

4-1/64

4-3/4

2-15/32

3-1/2

3-59/64

3-29/32

3-31/32

4

4-1/32

5-1/8

4

4-1/32

4-1/8

5-1/8

5-1/8

TADLOCK PIPE

1-10

SIZE

3-1/2

4

4-1/2

SIZE

3-1/2

4

4-1/2

NOTES

THREADED PORTION SAME AS 2-7/8 HUGHES XTRA HOLE AND

3-1/2 REED DOUBLE STREAMLINE

THREADED PORTION SAME AS 4” REED DOUBLE STREAMLINE

THREADED PORTION SAME AS 4-1/2” REED DOUBLE STREAMLINE

HUGHES DOUBLE STREAMLINEK

T.P.F

2

2

2

A

(IN.)

3-7/8

4

4-1/2

B

(IN.)

3-7/8

4-1/2

5

C

(IN.)

3-21/64

3-57/64

4-9/32

D

(IN.)

2-11/16

3-7/32

3-17/32

E

(IN.)

3-23/64

3-59/64

4-5/16

F

(IN.)

4-1/4

4-3/8

4-7/8

G

(IN.)

1-13/16

2-3/8

2-11/16

H

T.P.I.

4

4

4

J

(IN.)

3-15/64

3-51/64

4-3/16

TADLOCK PIPE

SIZE

3-1/2

4

4-1/2

5

5-1/2

A

(IN.)

3-7/8

4-1/8

4-3/8

4-5/8

4-5/8

B

(IN.)

5

5-1/8

5-1/4

5-2/8

5-1/2

5-1/2

5-5/8

5-3/4

5-7/8

6

6

6-1/8

6-1/4

6-3/8

6-1/2

6-1/2

6-5/8

6-3/4

6-7/8

7

6-3/4

6-7/8

7

7-1/8

7-1/4

7-3/8

7-1/2

C

(IN.)

4-1/8

4-1/2

4-53/64

5-7/64

5-3/8

D

(IN.)

3-31/64

3-13/16

4-7/64

4-21/64

4-39/64

E

(IN.)

4-3/16

4-9/16

4-57/64

5-11/64

5-7/16

F

(IN.)

4-7/16

4-11/16

4-15/16

5-3/16

5-3/16

G

(IN.)

2-5/8 – 2-3/4

2-1/2 – 2-3/4

2 – 2-5/8

2 – 2-1/4

2 – 2-1/8

2-7/8 – 3

2-1/2 – 2-7/8

2-1/4 – 2-7/8

2 – 2-3/4

2 – 2-1/2

3 – 3-1/4

2-3/4 – 3

2-1/2 – 3

2 – 3

2 – 2-3/4

2-7/8 – 3-1/4

2-1/2 – 3

2-1/4 – 3

2-1/4 – 2-3/4

2-1/2

3-1/8 – 3-3/8

3 – 3-1/4

2-3/4 – 3-1/4

2-1/4 – 3-1/4

2-1/4 – 3

2-1/4 – 2-3/4

2-1/4 – 2-1/2

H

T.P.I.

3-1/2

3-1/2

3-1/2

3-1/2

3-1/2

J

(IN.)

3-15/16

4-5/16

4-41/64

4-59/64

5-3/16

K

T.P.F

2

2

2

2

2

L

(IN.)

4-13/16

4-13/16

5

5

5

5-5/16

5-5/16

5-1/2

5-1/2

5-1/2

5-3/4

5-3/4

6

6

6

6-1/8

6-1/8

6-3/8

6-3/8

6-3/8

6-3/8

6-5/8

6-5/8

6-5/8

6-5/8

6-5/8

6-5/8

HUGHES H-90

1-11

TADLOCK PIPE

1-12

SIZE

6-5/8

7

7-5/8

8-5/8

A

(IN.)

4-7/8

5-3/8

6

6-1/2

C

(IN.)

6

6-1/2

7-25/64

8-17/64

D

(IN.)

5-3/16

5-5/32

5-57/64

6-41/64

E

(IN.)

6-1/16

7-1/8

8

9-3/8

F

(IN.)

6-11/16

5-15/16

6-9/16

7-1/16

H

T.P.I.

3-1/2

3-1/2

3-1/2

3-1/2

J

(IN.)

5-12/16

6-3/8

7-17/64

8-9/64

K

T.P.F.

2

3

3

3

B

(IN.)

7-5/8

7-3/4

7-7/8

8

8-1/8

8-1/4

8-1/4

8-3/8

8-1/2

8-5/8

8-3/4

9

9-1/2

9-5/8

9-3/4

9-7/8

10

10-1/4

10-3/4

11

11-1/4

11-1/2

G

(IN.)

3-3/8 – 3-5/8

3-1/4 – 3-1/2

3 – 3-1/2

2-1/2 – 3-1/2

2-1/2 – 3-1/4

2-1/2 – 3

3-1/2 – 3-3/4

2-3/4 – 3-3/4

2-3/4 – 3-3/4

2-3/4 – 3-1/2

2-3/4 – 3-1/4

2-3/4 – 3

3-1/2 – 4

3 – 4

3 – 4

3 – 4

3 – 3-3/4

3 – 3-1/4

3-1/2 – 4

3 – 4

3 – 4

3 – 3-1/4

L

(IN.)

7-1/4

7-1/2

7-1/2

7-1/2

7-1/2

7-1/2

8

8

8-1/4

8-1/4

8-1/4

8-5/8

9-1/4

9-1/4

9-1/4

9-5/8

9-5/8

9-5/8

10-1/2

10-1/2

10-3/4

10-3/4

HUGHES H-90 (CONTINUED)

TADLOCK PIPE

1-13

SIZE

2-3/8

2-7/8

3-1/2

4

4-1/2

A

(IN.)

2-7/8

2-7/8

3-3/8

3-3/8

3-7/8

B

(IN.)

2-7/8

3-3/8

4-1/8

4-5/8

5

C

(IN.)

2-7/16

2-7/8

3-25/64

3-13/16

4-1/64

D

(IN.)

1-31/32

2-25/64

2-53/64

3-1/4

3-3/8

E

(IN.)

2-1/2

2-15/16

3-29/64

3-7/8

4-5/64

F

(IN.)

3-1/4

3-1/4

3-3/4

3-3/4

4-1/4

G

(IN.)

1-13/64

1-3/4

2-1/8

2-7/16

2-11/16

H

T.P.I.

4

4

4

4

4

K

T.P.F.

2

2

2

2

2

SIZE

2-3/8

2-7/8

3-1/2

4

4-1/2

NOTES

OBSOLETE CONNECTION.

THREADED PORTION SAME AS2-3/8 API I.F. (NC26)

THREADED PORTION SAME AS2-7/8 API I.F. (NC37)

THREADED PORTION SAME AS 3-1/2 HUGHES XTRA HOLE,

3-1/2 REED XTRA HOLE, 4-1/2 HUGHES EXTERNAL FLUSH,

4-1/2 REED EXTERNAL FLUSH

THREADED PORTION SAME AS 3-1/2 API I.F. (NC38)

HUGHES SLIM HOLE

TADLOCK PIPE

1-14

HUGHES SLIMLINE H-90

SIZE

2-3/8

2-7/8

3-1/2

A

(IN.)

2-3/4

2-7/8

3-1/8

B

(IN.)

3-1/8

3-1/4

3-3/4

3-7/8

4

4

4-1/8

4-1/4

4-5/8

4-3/4

4-7/8

4-7/8

5

5-1/8

C

(IN.)

2.725

3.196

3.835

D

(IN.)

2.439

2.897

3.509

E

(IN.)

2-49/64

3-15/64

3-7/8

F

(IN.)

3-1/16

3-3/8

3-3/8

G

(IN.)

1-1/2

2-1/8 2-1/4

2-1/8 2-1/4

2-1/8 2-1/4

2

1-3/4 2

1-1/2 1-3/4

2-3/8 2-3/4

2-1/2 2-3/4

2-5/8

2-3/8 2-1/2

2 2-3/8

1-3/4 2-1/8

H

T.P.I.

3

3

3

J

(IN.)

2-43/64

3-5/32

3-25/32

K

T.P.F.

1-1/4

1-1/4

1-1/4

L

(IN.)

3-1/16

3-3/16

3-5/8

3-23/32

3-13/16

3-13/16

3-29/32

4

4-7/16

4-17/32

4-5/8

4-5/8

4-23/32

4-13/16

M

(IN.)

2-1/4

2-45/64

3-11/32

N

(IN.)

2-5/8

3-3/32

3-47/64

TADLOCK PIPE

1-15

SIZE

2-7/8

3-1/2

4-1/2

5

SIZE

2-7/8

3-1/2

4-1/2

5

NOTES

THREADED PORTION SAME AS 3-1/2 REED DOUBLE STREAMLINE, 2-7/8 REED

XTRA HOLE AND 3-1/2 HUGHES DOUBLE STREAMLINE

THREADED PORTION SAME AS 4-1/2 HUGHES EXTERNAL FLUSH, 4-1/2 API F.H.

REED EXTERNAL FLUSH, 4 HUGHES SLIM HOLE, 3-1/2 REED XTRA HOLE

THREADED PORTION SAME AS 4 API I.F. (NC46), 5 REED DOUBLE STREAMLINE,

4-1/2 REED XTRA HOLE

THREADED PORTION SAME AS 4-1/2 API I.F. (NC50), 5-1/2 REED DOUBLE

STREAMLINE, 5 REED XTRA HOLE

HUGHES XTRA HOLEA

(IN.)

3-7/8

3-3/8

4-3/8

4-1/2

B

(IN.)

4-1/4

4-3/4

6-1/4

6-3/8

C

(IN.)

3-21/64

3-13/16

4-53/64

5-1/4

D

(IN.)

2-11/16

3-1/4

4-7/64

4-1/2

E

(IN.)

3-23/64

3-7/8

4-29/32

5-5/16

F

(IN.)

4-1/2

3-15/16

4-15/16

4-7/8

G

(IN.)

1-7/8

2-1/8

3-1/4

3-3/4

H

T.P.I.

4

4

4

4

J

(IN.)

3-15/64

-

-

-

K

T.P.F.

2

2

2

2

TADLOCK PIPE

SIZE

2-3/8

2-7/8

3-1/2

3-1/2

4-1/2

4-1/2

A

(IN.)

2-3/8

2-5/8

3-1/4

3-1/4

3-3/8

3-3/8

B

(IN.)

2-1/2

3

3-5/8

3-11/16

4-11/16

4-17/32

C

(IN.)

2-7/64

2-1/2

3

3

3-13/16

3-13/16

D

(IN.)

1-23/32

2-1/16

2-29/64

2-29/64

3-1/4

3-1/4

E

(IN.)

2-1/16*

2-17/32

3-1/32

3-1/32

3-7/8

3-7/8

F

(IN.)

3-1/4

3

4

4

4-1/4

4-1/4

G

(IN.)

1

1-1/16

1-1/2

1-1/2

2-3/16

2-3/16

H

T.P.I.

6

6

4

4

4

4

J

(IN.)

2-1/64

-

-

-

-

-

K

T.P.F.

2

2

2

2

2

2

1-16

SIZE

2-3/8

3-1/2

4-1/2

NOTES

SAME AS 2-3/8 HOMCO (EXTERNAL FLUSH) “LITTLE INCH”

THREADED PORTIONS SAME AS 3-1/2 FH REED EXTERNAL FLUSH

THREADED PORTIONS SAME AS 4-1/2 FH REED EXTERNAL FLUSH,

3-1/2 HUGHES XTRA HOLE, 4 HUGHES SLIM HOLE, 3-1/2 REED XTRA HOLE

HUGHES EXTERNAL FLUSH

*STRAIGHT COUNTERBORE

TADLOCK PIPE

1-17

SIZE

X-1247

X-1248

X-1249

X-1250

R X-1251

NOTES

INTERCHANGEABLE WITH 4” REED DOUBLE STREAMLINE. PIN IS 1/2” LONGER THAN STANDARD. REFER TO REED DOUBLE STREAMLINE

FOR THREAD PROFILE.

INTERCHANGEABLE WITH 3-1/2” API I.F. PIN IS 1” LONGER THAN STANDARD.REFER TO API I.F. FOR THREAD PROFILE.

INTERCHANGEABLE WITH 5” REED DOUBLE STREAMLINE. PIN IS 1/2” LONGER THAN STANDARD.REFER TO REED DOUBLE STREAMLINE

FOR THREAD PROFILE.

INTERCHANGEABLE WITH 4-1/2 API I.F. PIN IS 3/4” LONGER THAN STANDARD. REFER TO API I.F. FOR THREAD PROFILE.

INTERCHANGEABLE WITH 6-5/8 API REG. PIN IS 1” LONGER THAN STANDARD. REFER TO API REG. FOR THREAD PROFILE.

HUMBLE “X” TYPE JOINTSIZE

X-1247

X-1248

X-1249

X-1250

X-1251

A

(IN.)

4-1/2

5

5

5-1/4

6

B

(IN.)

4-3/4

5-1/4

6-1/8

6-3/4

8

C

(IN.)

3-57/64

4-1/64

4-53/64

5-1/4

6

D

(IN.)

3-9/64

3-3/16

4

4-3/8

5

E

(IN.)

3-15/16

4-5/64

4-7/8

5-5/16

6-1/16

F

(IN.)

4-5/8

5

5-1/8

5-3/8

6-1/8

G

(IN.)

2

2

2-3/4

2-3/4

2-3/4

H

T.P.I.

4

4

4

4

4

J

(IN.)

3-1/2

3-11/16

4-1/2

4-7/8

5-9/16

K

T.P.F.

2

2

2

2

2

L

(IN.)

2-3/8

2-3/8

3-1/4

3-1/2

4

M

(IN.)

5-1/8

5-5/8

5-5/8

5-7/8

6-5/8

N

(IN.)

3-7/64

3-15/64

4-1/32

4-3/8

5

P

(IN.)

5/8

5/8

1/2

1/2

1/2

R

(IN.)

7/64

1/8

1/8

1/8

1/8

TADLOCK PIPE

1-18

REED EXTERNAL FLUSH

SIZE

3-1/2 F.H.

4-1/2 F.H.

NOTES

THREAD SAME AS 3-1/2 HUGHES EXTERNAL FLUSH

THREAD SAME AS 4-1/2 HUGHES EXTERNAL FLUSH- 4 HUGHES SLIM HOLE

3-1/2 HUGHESXTRA HOLE - 3-1/2 REED XTRA HOLE

SIZE

2-3/8 REG.

2-3/8 F.H.

2-7/8 F.H.

3-1/2 F.H.

4-1/2 F.H.

A

(IN.)

2-5/8

2-5/8

3

3-1/4

3-3/8

B

(IN.)

2-3/8

2-1/2

3

3-5/8

4-11/16

C

(IN.)

2

2-1/8

2-13/32

3

3-13/16

D

(IN.)

1-9/16

1-11/16

1-29/32

2-29/64

3-1/4

E

(IN.)

*1-15/16

*2-1/16

*2-3/8

3-1/32

3-7/8

F

(IN.)

3

3

3-3/8

4

4-1/4

G

(IN.)

7/8

1

1-1/4

1-1/2

2-3/16

H

T.P.I.

4

4

4

4

4

J

(IN.)

1-57/64

2-1/64

2-5/16

--

--

K

T.P.F.

2

2

2

2

2

Y

(IN.)

1/2

1/2

1/2

21/32

21/32

* STRAIGHT COUNTERBORE

TADLOCK PIPE

.250

1-19

SIZE

3-1/2

4

4-1/2

5

5-1/2

NOTES

THREAD SAME AS 3-1/2 HUGHES DOUBLE STREAMLINE, 2-7/8 HUGHES & REED XTRA HOLE

THREAD SAME AS 4 HUGHES DOUBLE STREAMLINE

THREAD SAME AS 4-1/2 HUGHES DOUBLE STREAMLINE

THREAD SAME AS 4 API I.F. (NC46) - 4-1/2 HUGHES X-HOLE - 4-1/2 REED XTRA HOLE

THREAD SAME AS 4-1/2 API I.F. (NC50) - 5 HUGHES XTRA HOLE - 5 REED XTRA HOLE

REED DOUBLE STREAMLINE

* STRAIGHT COUNTERBORE

SIZE

2-7/8

3-1/2

4

4-1/2

5

5-1/2

K

T.P.F.

2

2

2

2

2

2

A

(IN.)

3-1/2

4

4

4-1/2

4-1/2

4-1/2

B

(IN.)

3-1/4

3-7/8

4-1/2

5

5-9/16

6-1/8

C

(IN.)

2-45/64

3-21/64

3-57/64

4-9/32

4-53/64

5-1/4

D

(IN.)

2-1/8

2-21/32

3-7/32

3-17/32

4-5/64

4-1/2

E

(IN.)

*2-5/8

*3-1/4

*3-27/32

*4-1/4

4-55/64

5-5/16

F

(IN.)

3-7/8

4-3/8

4-3/8

4-7/8

4-7/8

4-7/8

G

(IN.)

1-1/4

1-13/16

2-3/8

2-11/16

3-3/8

3-3/4

H

T.P.I.

4

4

4

4

4

4

J

(IN.)

2-19/32

3-15/64

3-51/64

4-13/64

4-3/4

5-3/16

TADLOCK PIPE

1-20

SIZE

3-1/2

4

4-1/2

NOTES

THREAD SAME AS 3-1/2 API I.F. (NC38) - 4-1/2 SLIM HOLE

THREAD SAME AS 4 API I.F. (NC46) - 4-1/2 EXTRA HOLE

DOUBLE E STREAMLINE - 4-1/2 M.O.

THREAD SAME AS 4-1/2 API I.F. (NC50) 5 EXTRA HOLE

5-1/2 DOUBLE STREAMLINE - 5 M.O.

SIZE

2-3/8

2-7/8

3-1/2

4

4-1/2

A

(IN.)

2-3/8

3

3-1/2

4-1/2

4-1/2

B

(IN.)

3-3/8

4-1/8

4-3/4

5-3/4

6-1/8

C

(IN.)

2-13/16

3-21/64

4-1/64

4-53/64

5-1/4

D

(IN.)

2-27/64

2-53/64

3-7/16

4-3/32

4-1/2

E

(IN.)

2-55/64

3-3/8

4-5/64

4-29/32

5-5/16

F

(IN.)

2-7/16

3-1/16

4-1/16

4-9/16

4-9/16

G

(IN.)

2

2-7/16

3

3-7/16

3-7/8

H

T.P.I.

4

4

4

4

4

K

T.P.F.

2

2

2

2

2

REED WIDE OPEN (W.O.) TOOL JOINTS

SIZE

2-3/8

2-7/8

A

(IN.)

3

3-1/2

B

(IN.)

3-3/8

4

C

(IN.)

2-25/32

3-11/32

D

(IN.)

2-1/32

2-15/32

E

(IN.)

2-27/32

3-13/32

F

(IN.)

3-3/8

3-7/8

G

(IN.)

1-7/16

1-7/8

H

T.P.I.

5

5

K

T.P.F.

3

3

REED FULL HOLE

TADLOCK PIPE

1-21

SIZE

2-7/8

3-1/2

4-1/2

5

REED XTRA HOLEA

(IN.)

4

3-1/2

4-1/2

4-1/2

B

(IN.)

4-1/4

4-3/4

6

6-3/8

C

(IN.)

3-21/64

3-13/16

4-53/64

5-1/4

D

(IN.)

2-5/8

3-15/64

4-5/64

4-1/2

E

(IN.)

3-23/64

3-7/8

4-57/64

5-5/16

F

(IN.)

4

3-7/8

4-7/8

4-7/8

G

(IN.)

1-7/8

2-7/16

3-1/4

3-3/4

H

T.P.I.

4

4

4

4

J

(IN.)

3-15/64

3-45/64

4-23/32

5-9/64

K

T.P.F.

2

2

2

2

SIZE

2-7/8

3-1/2

4-1/2

5

NOTES

THREAD SAME AS 3-1/2 REED DOUBLE STREAMLINE

THREAD SAME AS 3-1/2 HUGHES XTRA HOLE, 4 HUGHES SLIM HOLE,

4-1/2 HUGHES EXTERNAL FLUSH, 4-1/2 F.H. REED EXTERNAL FLUSH

THREAD SAME AS 4 API I.F. (NC46), 4-1/2 HUGHES XTRA HOLE,

5 REED DOUBLE STREAMLINE

THREAD SAME AS 4-1/2 API I.F. (NC50), 5 HUGHES XTRA HOLE,

5-1/2 REED DOUBLE STREAMLINE

TADLOCK PIPE

1-22

YIELD

ULTIMATE

TORQUE*

YIELD

ULTIMATE

TORQUE*

YIELD

ULTIMATE

TORQUE*

YIELD

ULTIMATE

TORQUE*

1

.785

55,000

67,500

570

51,000

78,500

530

53,800

78,500

560

75,300

94,200

783

1/2

.196

13,700

16,800

70

--

--

65

--

--

68-1/2

--

--

96

5/8

.306

21,400

26,300

140

19,900

30,600

130

20,900

30,600

136

29,400

37,700

192

3/4

.442

30,900

38,000

171

28,700

44,200

159

30,300

44,200

168

42,300

53,000

235

7/8

.601

42,100

51,700

381

39,100

60,100

353

41,200

60,100

372

57,700

72,000

476

ROD SIZE - INCHES

ROD AREA - SQUARE INCHES

J&L TYPE 7 WITH ULTIMATE TENSILE

STRENGTH OF 86,000 PSI & YIELD

OF 70,000 PSI

J&L TYPE 2 WITH ULTIMATE

TENSILE STRENGTH OF 100,000 PSI

& YIELD OF 65,000 PSI.

J&L TYPE 1 WITH ULTIMATE

TENSILE STRENGTH OF 100,000 PSI

& YIELD OF 68,500 PSI

J&L TYPE 12 WITH ULTIMATE

TENSILE STRENGTH OF 120,000 PSI

& YIELD OF 96,000 PSI.

SIZE

1/2

5/8

3/4

7/8

1

1-1/8

O.D.

E

(IN.)

---

1-1/2

1-5/8

1-13/16

2-3/16

2-3/8

LENGTH

L

(IN.)

---

4

4

4

4

4-1/2

WRENCH

LENGTH

R (IN.)

---

1-1/4

1-1/4

1-1/4

1-1/2

1-5/8

FLAT DIST.

BETWEEN

S (IN.)

---

1-3/8

1-1/2

1-5/8

1-7/8

2-1/8

USED WITH MIN.

TUBING SIZE O.D.

(IN.)

---

2-1/16

2-3/8

2-7/8

3-1/2

3-1/2

O.D.

C

(IN.)

1

1-1/4

1-1/2

1-5/8

2

---

LENGTH

L

(IN.)

2-3/4

4

4

4

4

---

USED WITH MIN.

TUBING SIZE O.D.

(IN.)

1.660

1.990

2-1/16

2-3/8

2-7/8

---

SUCKER ROD COUPLINGSFULL-SIZE AND SUBCOUPLING SLIMHOLE AND SUBCOUPLING

SUCKER ROD STRENGTH TABLEDATA REPRINTED FROM API SPEC 11B, APRIL 1974

* TORQUE (FT.-LBS) BASED ON ROD O.D. AT YIELD

TADLOCK PIPE

1-23

SIZE

1/2

5/8

3/4

7/8

1

1-1/8

SUCKER ROD CONNECTIONSA (IN.)

1.125

1.250

1.437

1.625

1.875

2.125

B (IN.)

1.000

1.250†

1.500

1.625

2.000

2.250

C (IN.)

.750

.936

1.061

1.186

1.374

1.561†

D (IN.)

3/4

1-1/4

1-1/4

1-1/4

1-1/2

1-5/8

E (IN.)

.767

.955

1.080

1.205

1.393

1.580

F (IN.)

1.29

1.41

1.60

1.79

2.07

2.31

H (IN.)

10

10

10

10

10

10

M (IN.)

.642

.830

.955

1.080

1.267

1.455

U (IN.)

1-5/8

1-3/4

1-15/16

2-1/8

2-1/2

2-3/4

W (IN.)

5/8

7/8

1

1

1-5/16

1-1/2

† THIS IS THE DIMENSION FOR PIN-BY-PIN SUCKER RODS; THE DIMENSION FOR BOX AND PIN SUCKER RODS IS 1.375.

TADLOCK PIPE

1-24

O.D.

(INCHES)

1-9/16

1-9/16

1-9/16

1-3/4

1-3/4

1-3/4

1-3/4

2-3/16

1-3/4

2

2

2

2

2

1-9/16

1.660

1-13/16

1-13/16

1-13/16

1-13/16

2.330

2-1/4

2-1/4

2-7/8

2-7/8

3-1/8

2-1/2

2-1/2

3-7/8

3-3/4

3-1/8

3-1/8

3-1/8

3-3/4

4-1/4

I.D.

(INCHES)

3/4

13/16

3/4

1.000

7/8

13/16

3/4

5/8

7/8

1.000

1-5/32

1-1/8

1-1/16

1.000

.937

3/4

1.000

3/4

3/4

3/4

1-1/4

3/4

1.000

1-3/8

1-1/2

1

1.000

1-1/16

2.151

2.441

1-1/2

1-1/2

1.000

2.000

2.000

TENSION

YIELD

STRENGTH

(POUNDS)

68,100

58,080

68,100

69,698

93,984

104,808

115,000

155,300

93,984

127,100

92,136

99,528

113,784

127,100

71,120

89,375

111,000

113,000

110,700

113,000

135,036

181,900

142,500

238,440

201,900

375,500

203,100

138,000

345,360

223,680

269,470

269,470

323,000

352,800

507,600

TORSION

YIELD

STRENGTH

(FOOT-POUNDS)

765

650

1,300

865

1,265

1,265

1,265

2,150

1,800

1,770

1,285

1,385

1,585

2,800

900

1,050

900

1,600

1,595

1,600

3,500

4,600

2,100

4,800

6,490

8,045

3,350

4,490

8,900

5,700

5,800

7,290

12,285

8,800

26,500

RECOMMENDED

MAKE-UP

TORQUE

(FOOT-POUNDS)

500

450

500

500

650

650

650

1,075

650

950

700

750

900

950

450

525

450

800

800

800

1,100

2,300

500

2,400

3,250

4,020

1,670

2,250

4,450

2,850

2,900

3,650

6,140

4,400

13,250

JOINT

1 AM. M.T.

1 AM. M.T.

1 AM. M.T.-DSI

1-1/4 AM. M.T.

1-1/4 AM. M.T.

1-1/4 AM. M.T.

1-1/4 AM. M.T.

1-1/4 F.J. (REG.)

1-1/4 AM. M.T.-DSI

1-1/2 AM. M.T.

1-1/2 AM. M.T.

1-1/2 AM. M.T.

1-1/2 AM. M.T.

1-1/2 AM. M.T.-DSI

1-9/16 HOMCO SLIMLINE

1-5/8 BAASH ROSS

1-13/16 HOMCO SLIMLINE

1-13/16 HOMCO F.J.

1-13/16 PRT

1-13/16 WILSON F.J.

2-1/16 AM. M.T.-DSI

2-1/4 PRT

2-1/4 T.S.S.

2-3/8 AM. PAC

2-3/8 AM. PAC DSI†

2-3/8 API REG. DSI†

2-3/8 HOMCO F.J.

2-3/8 WILSON F.J.

2-7/8 AM. O.H.

2-7/8 AM. O.H.

-LIGHTWEIGHT

2-7/8 AM. PAC

2-7/8 AM. PAC DSI†

3-1/8 PRT

3-1/2 AM. PAC

4-1/4 PRT

SMALL DIAMETER TOOL JOINTSDIMENSION AND STRENGTH* DATA

* STRENGTHS BASED ON A MATERIAL YIELD OF 120,000 PSI. CHECK APPLICABLE PIPE FOR COMPARATIVE VALUES IN TENSION AND TORSION.† DOUBLE SHOULDER INTERNAL

TADLOCK PIPE

1-25

CONNECTION

TYPE

API REG.

API I.F.

API REG.

API I.F.

HUGHES S.H.

HUGHES X-HOLE

API REG.

API F.H.

API I.F.

HUGHES D.S.L.

HUGHES S.H.

HUGHES X-HOLE

HUGHES H-90

HUGHES H-90

API F.H.

API I.F.

HUGHES S.H.

HUGHES H-90

API REG.

API F.H.

API I.F.

HUGHES X-HOLE

HUGHES H-90

HUGHES H-90

HUGHES X-HOLE

API REG.

API F.H.

API I.F.

API REG.

API F.H.

SIZE

2-3/8

2-7/8

3-1/2

4

4-1/2

5

5-1/2

6-5/8

LARGE DIAMETER TOOL JOINTSDIMENSION AND STRENGTH DATA

API AND NON-API

BOX O.D.

(INCHES)

3-1/8

3-3/8

3-3/4

4-1/8

3-3/8

4-1/4

4-1/4

4-5/8

4-3/4

3-7/8

4-1/8

4-3/4

5

5-1/4

5-1/4

6

4-5/8

5-1/2

5-1/2

5-3/4

6-3/8

6-1/4

6

6

6-3/8

6-3/4

7

7-3/8

7-3/4

8

PIN I.D.

(INCHES)

1

1-3/4

1-1/4

2-1/8

1-3/4

1-7/8

1-1/2

2-1/8

2-11/16

1-13/16

2-1/8

2-7/16

2-3/4

2-3/4

2-13/16

3-1/4

2-9/16

2-13/16

2-1/4

3

3-3/4

3-1/4

3-1/4

3

3-3/4

2-3/4

4

4-13/16

3-1/2

5

TENSILE YIELD

STRENGTH

(POUNDS)

375,500

313,680

493,600

447,130

313,680

505,080

727,400

779,900

587,310

561,120

447,130

570,940

663,130

663,130

757,500

901,170

512,040

913,470

1,262,000

1,017,000

944,000

901,150

938,150

1,085,410

939,100

1,779,000

1,265,760

1,265,500

1,867,000

1,448,800

TORSION YIELD

STRENGTH

(POUNDS)

7,500

6,800

13,000

11,800

6,800

13,400

15,100

16,300

18,100

14,000

11,800

17,100

23,500

23,800

23,500

33,600

15,000

35,400

30,000

35,400

37,800

34,000

38,900

45,200

37,700

61,000

56,300

45,000

58,000

50,000

RECOMMENDEDMAKE-UP

TORQUE

(FOOT-POUNDS)

3,700

3,400

6,500

5,900

3,400

6,700

7,500

8,100

9,100

7,000

6,000

8,550

11,800

11,800

11,800

16,900

7,500

17,700

15,000

17,700

18,900

17,000

19,500

22,600

18,900

30,000

28,000

23,500

29,000

25,000

TADLOCK PIPE

1-26

SIZE

2-3/8

2-7/8

3

3-1/2

4

4-1/2

5-1/2

6-5/8

7-5/8

8-5/8

TYPE

API REG.

API I.F.

HYDRIL I.F.

API REG.

F.H.

API I.F.

HYDRIL I.F.

HUGHES XTRA HOLE

UNION TOOL

API REG.

API F.H.

API I.F.

HYDRIL I.F.

HUGHES XTRA HOLE

API F.H.

API I.F.

UNION TOOL

API REG.

API F.H.

API I.F.

HYDRIL I.F.

HUGHES XTRA HOLE

API REG.

API F.H.

API I.F.

API REG.

API F.H.

API I.F.

API REG.

API REG.

MINIMUM

2-15/16

3-3/16

3-1/8

3-1/2

4-1/16

3-7/8

3-5/8

4

3-3/4

4

4-1/2

4-1/2

4-3/8

4-1/2

5

5-1/2

5-3/8

5-3/8

5-1/2

5-7/8

5-13/16

5-5/8

6-3/8

6-1/2

7-1/8

7-1/8

7-1/2

8-3/8

8-1/8

9

MAXIMUM

3-1/4

3-5/8

3-5/8

4

4-5/8

4-3/8

4-1/8

4-5/8

4-1/2

4-5/8

5

5

4-7/8

5

5-3/8

6

6

6

6

6-1/2

6-1/4

6-1/4

7

7-1/4

7-7/8

7-7/8

8-1/4

9

9

10-1/8

RECOMMENDED MAXIMUM AND MINIMUMTOOL JOINT DIMENSIONS

NOM O.D.

(IN.)

3-1/8

3-3/8

3-3/8

3-3/4

4-1/4

4-1/8

3-7/8

4-1/4

4-1/4

4-1/4

4-5/8

4-3/4

4-1/2

4-3/4

5-1/4

5-3/4

5-3/4

5-3/4

5-3/4

6-3/8

6

6-1/4

6-3/4

7

7-3/8

7-3/4

8

8-1/2

8-7/8

10

NOM I.D.

(IN.)

1

1-3/4

1-3/4

1-1/4

2-1/8

2-1/8

2-1/8

1-7/8

1-1/2

1-1/2

2-1/8

2-11/16

2-3/4

2-7/16

2-13/16

3-1/4

2-1/4

2-1/4

3

3-3/4

3-3/4

3-1/4

2-3/4

4

4-13/16

3-1/2

5

5-29/32

4

4-3/4

A

MAXIMUM

1-1/8

1-3/4

1-3/4

1-3/8

2-1/8

2-1/8

2-3/16

1-7/8

1-1/2

1-3/4

2-7/16

2-11/16

2-3/4

2-7/16

2-13/16

3-5/16

2-7/8

2-5/8

3-5/32

3-3/4

3-7/8

3-1/4

3-1/4

4

4-13/16

4

5

5-29/32

4-1/4

5-1/4

B

MAXIMUM

1-5/8

2

1-7/8

1-7/8

2-3/8

2-1/2

2-3/16

2-1/8

2-1/8

2-1/4

2-3/4

3

2-13/16

2-3/4

3-1/4

3-1/2

3-1/2

3-1/4

3-1/2

4-1/8

4

3-3/8

3-7/8

4-1/2

5-1/4

4-3/4

5-1/2

6-1/4

5-1/4

6-1/4

JOINTS C

TADLOCK PIPE

1-27

GA BC D E F

SYMBOL

E ROD (3 THD)

A ROD (3 THD)

B ROD (5THD)

N ROD (4 THD)

N ROD (3 THD)

1.625

1.875

2.000

2.500

2.500

1.50

1.75

1.87

2.37

2.37

1.312

1.625

1.906

2.375

2.375

MAX

.999

1.264

1.405

1.874

1.874

MIN

.997

1.262

1.403

1.872

1.872

MAX

.874

1.139

1.280

1.686

1.688

MIN

.870

1.134

1.275

1.681

1.681

MAX

1.003

1.268

1.409

1.878

1.878

MIN

1.001

1.266

1.407

1.876

1.876

MAX

.878

1.143

1.284

1.690

1.690

MIN

.876

1.141

1.282

1.688

1.688

“X” SERIES DRILL ROD

“X” SERIES DRILL ROD

MAX

.1608

.1608

.0941

.1164

.1581

H JM (BOX) M (PIN) N (BOX)

SYMBOL

E ROD (3 THD)

A ROD (3 THD)

B ROD (5 THD)

N ROD (4 THD)

N ROD (3 THD)

1.437

1.687

1.812

2.312

2.312

.25

.25

.26

.31

.31

MAX

.1680

.1680

.1014

.1236

.1653

MIN

.1617

.1617

.0950

.1173

.1590

MAX

.1657

.1657

.0990

.1212

.1653

MIN

.1617

.1617

.0950

.1173

.1590

MAX

.1608

.1608

.0941

.1163

.1581

MIN

.1544

.1544

.0877

.1099

.1517

K

.437

.562

.625

1.000

1.000

L

.843

1.265

1.406

2.000

2.000

N (PIN)

MIN

.1563

.1563

.0897

.1120

.1517

TADLOCK PIPE

1-28

A BC D E F

SYMBOL

EW ROD (3 THD)

AW ROD (3 THD)

BW ROD (3 THD)

NW ROD (3 THD)

1.562

1.875

2.250

2.750

1.375

1.750

2.125

2.625

MAX

1.062

1.374

1.684

2.218

MIN

1.060

1.372

1.682

2.216

MAX

.937

1.249

1.527

2.030

MIN

.932

1.244

1.522

2.025

MAX

1.066

1.378

1.688

2.222

MIN

1.064

1.376

1.686

2.220

MAX

.941

1.253

1.531

2.034

MIN

.939

1.251

1.529

2.032

“W” SERIES DRILL ROD

M (BOX) M (PIN)SYMBOL G

MAX

.1680

.1680

.1665

.1651

MIN

.1617

.1617

.1604

.1590

MAX

.1657

.1657

.1641

.1627

MIN

.1617

.1617

.1604

.1590

“W” SERIES DRILL ROD

H J K L

1.562

1.875

2.250

2.750

1.437

1.750

2.125

2.625

.312

.375

.375

.375

.437

.525

.750

1.375

1.062

1.437

1.812

2.312

EW ROD (3THD)

AW ROD (3 THD)

BW ROD (3 THD)

NW ROD (3 THD)

TADLOCK PIPE

NOTES

TADLOCK PIPE

API DRILL PIPE REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1DIMENSIONAL DATA AND PERFORMANCEPROPERTIES OF GRADES D, E, X-95, G-105 AND S-135 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4MECHANICAL PROPERTIES OF NEW TOOL JOINTS AND NEW GRADE E DRILL PIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6MECHANICAL PROPERTIES OF NEW TOOL JOINTS AND NEW HIGH STRENGTH DRILL PIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8DRILCO HEVI-WATE DRILL PIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9MILL SLOT & GROOVE METHOD OF DRILL STRING IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10DRILL PIPE FLOATS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

DRILL PIPE

TADLOCK PIPE

2-1

DRILL PIPE SIZE

1.050–3.500

4.000–5.000

5.500–8.625

ALL

SIZES

DIMENSION

O.D.*

WALL THICKNESS

I.D.

ECCENTRICITY: O.D.

ECCENTRICITY: I.D.

OVALITY (ON UPSET)

TOLERANCE

+3/32" – 1/32"

+7/64" – .75% O.D.

+1/8" – .75% O.D.

– 12.5%

GOVERNED BY O.D. TOLERANCES

.093" MAX. (TOTAL INDICATOR READING)

1/16" (1/8” TOTAL INDICAOR READING)

.093" MAXIMUM

D

E

X-95

G-105

S-135

55000

75000

95000

105000

135000

-----

105000

125000

135000

165000

95000

100000

105000

115000

145000

DRILL PIPE SIZE

ALL EU (EXCEPT 3-12” 13.3#)

API DRILL PIPE REQUIREMENTSDRIFT TESTDRIFT MANDREL LENGTH

4"

DRIFT MANDREL DIAMETER

I.D. MINUS 3/16"

TENSILE REQUIREMENTSGRADE

MIN PSI MAX PSI

TENSILE STRENGTH

MINIMUM PSI

YIELD STRENGTH

RANGE LENGTHS

TOTAL RANGE LENGTH, INCL

PERMISSIBLE VARIATION, MAX.

RANGE LENGTH FOR 95% OR MORE OF CARLOAD:

PERMISSIBLE LENGTH, MIN.

PERMISSIBLE VARIATION, MAX.

RANGE LENGTH FOR 90% OR MORE OF CARLOAD

PERMISSIBLE LENGTH, MAX.

RANGE 1

(FT.)

18–22

2

20

--

--

RANGE 2

(FT.)

27–30

--

--

2

27

RANGE 3

(FT.)

38–45

--

--

3

38

TOLERANCES

* MEASUREMENTS MADE IMMEDIATELY BEHIND THE UPSET FOR A DISTANCE OF APPROXIMATELY 5 INCHES FOR SIZES 5-1/2" O.D. AND SMALLER, AND A DISTANCE APPROXIMATELY EQUAL TO THE O.D. FOR SIZES LARGER THAN 5-1/2".

TADLOCK PIPE

2-2

1.3042

1.8429

1.8120

2.8579

2.5902

3.6209

O.D.

(IN.) T&C

PLAIN

END

I.D.

(IN.)

WALL

THICKNESS

(IN.)

SECTION

AREA BODY

OF PIPE

(SQ. IN.) GRADE

TORSIONAL

YIELD

STRENGTH

(FT/LBS)

TENSILE

YIELD

STRENGTH†

(LBS)

COLLAPSE

PRESSURE

(PSI)

BURST

PRESSURE

(PSI)

2-3/8

4.85

6.65

6.85

10.40

9.50

13.30

4.43

6.26

6.16

9.72

8.81

12.31

1.995

1.815

2.441

2.151

2.992

2.764

.190

.280

.217

.362

.254

.368

D

E

X-95

G-105

S-135

D

E

X-95

G-105

S-135

D

E

X-95

G-105

S-135

D

E

X-95

G-105

S-135

D

E

X-95

G-105

S-135

D

E

X-95

G-105

S-135

3490

4760

6030

6670

8570

4580

6250

7920

8750

11250

5930

8080

10240

11320

14550

8470

11550

14640

16180

20800

10370

14150

17920

19800

25460

13600

18550

23500

25970

33390

71730

97820

123900

136940

176070

101360

138220

175080

193500

248790

99660

135900

172140

190260

244620

157180

214340

271500

300080

385820

142460

194270

246070

271970

349680

199150

271570

343990

380190

488820

8100

11040

13980

15460

19070

11440

15600

19760

21840

28080

7660

10470

12930

14010

17060

12110

16510

20910

23110

29720

7400

10040

12080

13050

15780

10350

14110

17880

19760

25400

10500

13300

14700

18900

11350

15470

19600

21660

27850

9910

12550

13870

17830

12120

16530

20930

23140

29750

9520

12070

13340

17150

10120

13800

17480

19320

24840

NEW DRILL PIPEDIMENSIONAL DATA AND PERFORMANCE PROPERTIES

WEIGHT

LBS/FI

2-7/8

3-1/2

*THESE SIZES/WEIGHTS NOT INCLUDED IN API SPECIFICATION 5A AND 5AX†TENSION STRENGTH FOR THE CONNECTION EXCEEDS THAT OF THE PIPE. USE PIPE STRENGTH AS GUIDE.

TADLOCK PIPE

2-3

4.3037

3.0767

3.8048

4.3216

3.6004

4.4074

O.D.

(IN.) T&C

PLAIN

END

I.D.

(IN.)

WALL

THICKNESS

(IN.)

SECTION AREA

BODY OF PIPE

(SQ.IN.) GRADE

TORSIONAL

YIELD

STRENGTH

(FT/LBS)

TENSILE YIELD

STRENGTH

(LBS)

COLLAPSE

PRESSURE

(PSI)

BURST

PRESSURE

(PSI)

3-1/2

15.50

11.85

14.00

15.70

13.75

16.60

14.63

10.46

12.93

14.69

12.24

14.98

2.602

3.476

3.340

3.240

3.958

3.826

.449

.262

.330

.380

.271

.337

D

E

X-95

G-105

S-135

D

E

X-95

G-105

S-135

D

E

X-95

G-105

S-135

D

E

X-95

G-105

S-135

D

E

X-95

G-105

S-135

D

E

X-95

G-105

S-135

15460

21090

26710

29520

37950

14280

19470

24670

27260

35050

17080

23290

29500

32600

41920

18930

25810

32690

36130

46460

19000

25910

32820

36270

46630

22590

30810

39020

43130

55450

236700

322780

408850

451890

581000

169220

230750

292290

323050

415350

209260

285360

361460

399500

513650

237690

324120

410550

453770

583420

198020

270030

342040

378040

486050

242410

330560

418700

462780

595000

12300

16770

21250

23480

30190

6590

8410

9960

10700

12650

8330

11350

14380

15900

20170

9460

12900

16340

18050

23210

5720

7200

8400

8950

10310

7620

10390

12750

13820

16800

12350

16840

21330

23570

30310

8600

10890

12040

15480

7940

10830

13720

15150

19490

9140

12470

15790

17460

22440

7900

10010

11070

14230

7210

9830

12450

13760

17690

NEW DRILL PIPEDIMENSIONAL DATA AND PERFORMANCE PROPERTIES

WEIGHT

LBS/FT

4

4-1/2

*THESE SIZES/WEIGHTS NOT INCLUDED IN API SPECIFICATION 5A AND 5AX.†TENSION STRENGTH FOR THE CONNECTION EXCEEDS THAT OF THE PIPE. USE PIPE STRENGTH AS GUIDE.

TADLOCK PIPE

2-4

O.D.

(IN.) T&C

PLAIN

END

I.D.

(IN.)

WALL

THICKNESS

(IN.)

SECTION

AREA

BODY OF PIPE

(SQ.IN.) GRADE

TORSIONAL

YIELD

STRENGTH

(FT/LBS)

TENSILE YIELD

STRENGTH

(LBS)

COLLAPSE

PRESSURE

(PSI)

BURST

PRESSURE

(PSI)

NEW DRILL PIPEDIMENSIONAL DATA AND PERFORMANCE PROPERTIES

WEIGHT

LBS/FT

*THESE SIZES/WEIGHTS NOT INCLUDED IN API SPECIFICATION 5A AND 5AX.†TENSION STRENGTH FOR THE CONNECTION EXCEEDS THAT OF THE PIPE. USE PIPE STRENGTH AS GUIDE.

4-1/2

5

5.4981

4.3743

5.2746

7.0686

4.9624

5.8282

6.6296

6.5262

20.00

16.25

19.50

25.60

19.20

21.90

24.70

25.20

18.69

14.87

17.93

24.03

16.87

19.81

22.54

22.19

3.640

4.408

4.276

4.000

4.892

4.778

4.670

5.965

.430

.296

.362

.500

.304

.361

.415

.330

D

E

X-95

G-105

S-135

D

E

X-95

G-105

S-135

D

E

X-95

G-105

S-135

D

E

X-95

G-105

S-135

D

E

X-95

G-105

S-135

D

E

X-95

G-105

S-135

D

E

X-95

G-105

S-135

D

E

X-95

G-105

S-135

27060

36900

46740

51660

68420

25700

35040

44390

49060

63080

30190

41170

52140

57600

74100

38320

52260

66190

73160

94060

32320

44070

55830

61700

79330

37190

50710

64230

70990

91280

41490

56570

71660

79200

101830

51760

70580

89400

98810

127050

302400

412360

522320

577300

742240

204590

328070

415560

459300

590530

290100

395600

501090

553830

712070

388770

530150

671520

742200

954260

272930

372180

471430

521050

669920

320550

437120

553680

611960

786810

364630

497220

829810

696110

895000

358940

489470

619990

685250

881040

9510

12960

16420

18150

23330

5560

6970

8090

8610

9860

7390

10000

12010

12890

15770

9900

13500

17100

18900

24300

4910

6070

6930

7300

8120

6510

8440

10000

10740

12710

7670

10460

12920

14000

17050

4010

4810

5310

5490

6040

9200

12540

15890

17560

22580

7770

9840

10880

13990

6970

9500

12040

13300

17110

9620

13120

16620

18380

23620

7250

9190

10160

13060

6320

8610

10910

12060

15510

7260

9900

12540

13860

17830

4790

6540

8280

9150

11770

5-1/2

6-5/8

TADLOCK PIPE

2-5

2-3/8

4760

4760

4760

4760

6250

6250

6250

8080

8080

8080

8080

11550

11550

11550

11550

11550

11550

14150

14150

14150

14150

18550

18550

18550

18550

21090

97820

97820

97820

97820

138220

138220

138220

135900

135900

135900

135900

214340

214340

214340

214340

214340

214340

194270

194270

194270

194270

271570

271570

271570

271570

322780

3400

2250

2300

2550

3400

3200

2400

5900

3700

2850

3800

5900

4450

5650

6700

3400

2900

9050

6400

6050

6300

9050

8700

8550

5900

10150

6800

4500

4600

5100

6800

6400

4800

11800

7400

5700

7600

11800

8900

11300

13400

6800

5800

18100

12800

12100

12600

18100

17400

17100

11800

20300

313680

195720

206280

202670

313680

294600

238440

447130

277560

223680

260780

447130

345360

382550

505080

313680

269470

587310

419800

392040

366450

587310

559560

570940

447130

649160

1.625

1.807

1.807

1.850

1.625

1.625

1.250

2.000

2.253

2.253

2.296

1.963

1.963

2.006

1.750

1.625

1.375

2.563

2.804

2.804

2.847

2.457

2.414

2.313

2.000

2.414

1-3/4

2

2

2

1-3/4

1-3/4

1-3/8

2-1/8

2-7/16

2-7/16

2-7/16

2-1/8

2-5/32

2-5/32

1-7/8

1-3/4

1-1/2

2-11/16

3

3

3

2-11/16

2-11/16

2-7/16

2-1/8

2-9/16

3-3/8

3-3/8

3-1/8

3-1/4

3-3/8

3-1/4

2-7/8

4-1/8

4-1/8

3-3/4

3-7/8

4-1/8

3-7/8

3-7/8

4-1/4

3-3/8

3-1/8

4-3/4

4-3/4

4-1/2

4-5/8

4-3/4

4-3/4

4-3/4

4-1/8

5

NC26 (IF)

W.O.

O.H.

SL-H90

NC26 (IF)

O.H.

P.A.C.

NC31 (IF)

W.O.

O.H.

SL-H90

NC31 (IF)

O.H.

SL-H90

X.H.

NC26

P.A.C.

NC38 (IF)

NC38 (W.O.)

O.H.

SL-H90

NC38 (IF)

O.H.

X.H.

NC31 (S.H.)

NC38 (IF)

2-9/16

2-9/16

2-9/16

2-9/16

2-9/16

2-9/16

2-1/2

3-3/16

3-3/16

3-3/16

3-3/16

3-3/16

3-3/16

3-3/16

3

3

3

3-7/8

3-7/8

3-7/8

3-7/8

3-7/8

3-7/8

3-5/8

3-5/8

3-7/8

EU

EU

EU

EU

EU

EU

IU

EU

EU

EU

EU

EU

EU

EU

IU

IU

IU

EU

EU

EU

EU

EU

EU

IU

IU

EU

5.15

5.09

4.87

4.94

7.00

6.87

6.75

7.33

7.25

6.91

6.97

10.82

10.57

10.53

11.20

10.37

10.29

10.39

10.25

9.95

10.12

13.86

13.86

14.06

13.51

16.42

4.85

6.65

6.85

10.40

9.50

13.30

15.50

O.D.

(IN.) NOM.

WT.

ADJ.*

WT.TYPE

O.D.

(IN.) TYPE

O.D.

(IN.)

I.D.

(IN.)

DRIFT

I.D.

(IN.)

ºTENSILE

YIELD

STRENGTH

(LBS)

TORSION

YIELD

STRENGTH

(FT-LBS)

RECOMMENDED

MAKE-UP

TORQUE

(FT-LBS)

TENSILE

YIELD

STRENGTH

(LBS)

†TORSION

YIELD

STRENGTH

(FT-LBS)

WEIGHT

(LBS/FT)UPSET

DRILL PIPE DATA TOOL JOINT DATA DRILL PIPE DATA

CONNECTION

MECHANICAL PROPERTIES OF NEW TOOL JOINTSAND NEW GRADE E DRILL PIPE

*TOOL JOINT PLUS DRILL PIPEºTHE TENSILE STRENGTH OF THE TOOL JOINT PIN IS BASED ON 120,000 PSI YIELD AND THE CROSS-SECTIONAL AREA AT THE ROOT OF THE THREAD 5/8 INCH FROM THE SHOULDER.†TORSIONAL YIELD STRENGTH BASED ON SHEAR STRENGTH OF 57.7% OF THE MINIMUM YIELD STRENGTH.

2-7/8

3-1/2

TADLOCK PIPE

13.51

16.42

2-6

4

19470

19470

19470

19470

23290

23290

23290

23290

25810

25810

25810

25910

25910

25910

25910

30810

30810

30810

30810

30810

30810

36900

36900

36900

36900

41170

41170

52260

52260

50710

56570

70580

230750

230750

230750

230750

285360

285360

285360

285360

324120

324120

324120

270030

270030

270030

270030

330560

330560

330560

330560

330560

330560

412360

412360

412360

412360

395600

395600

530150

530130

437120

497220

489470

16800

14550

11100

17700

16800

13700

12550

7500

16800

12700

17700

17050

18850

10650

19450

18850

13750

16950

17400

19450

9060

20600

19800

17400

22600

18850

31100

22450

31100

28150

28150

37100

33600

29100

22200

35400

33600

27400

23500

15000

33600

25400

35400

34100

37700

21300

38900

37700

27500

33900

34800

38800

18120

41200

39600

34800

45200

37700

62200

44900

62200

56300

56300

74200

901170

782990

621240

913470

901160

759340

711610

512040

901170

776400

913470

944000

849600

554760

938150

944000

713880

901170

976160

938150

330560

1030880

1048430

976160

1085410

943990

1448400

1110240

1619280

1265760

1265760

1448800

3.125

3.313

3.287

2.688

3.125

3.125

2.688

2.438

3.095

2.563

2.686

3.625

3.750

3.770

3.125

3.625

3.625

3.125

2.875

3.125

2.563

3.452

2.875

2.875

2.875

3.625

3.625

3.375

3.375

3.875

3.875

4.875

3-1/4

3-7/16

3-15/32

2-13/16

3-1/4

3-1/4

2-13/16

2-9/16

3-1/4

2-11/16

2-13/16

3-3/4

3-7/8

3-31/32

3-1/4

3-3/4

3-3/4

3-1/4

3

3-1/4

2-11/16

3-5/8

3

3

3

3-3/4

3-3/4

3-1/2

3-1/2

4

4

5

6

5-3/4

5-1/4

5-1/2

6

5-1/2

5-1/4

4-5/8

6

5-1/4

5-1/2

6-3/8

6-1/8

5-3/4

6

6-3/8

5-7/8

6-1/4

6

6

5

6-3/8

6-1/4

6

6

6-3/8

7

6-3/8

7

7

7

8

4-1/2

4-1/2

4-1/2

4-3/16

4-1/2

4-1/2

4-3/16

4-3/16

4-1/2

4-3/16

4-3/16

5

5

5

4-11/16

5

5

4-11/16

4-11/16

4-11/16

4-11/16

5

4-11/16

4-11/16

4-11/16

5-1/8

5-1/8

5-1/8

5-1/8

5-11/16

5-11/16

6-3/4

EU

EU

EU

IU

EU

EU

IU

IU

EU

IU

IU

EU

EU

EU

IU

EU

EU

IEU

IEU

IEU

IEU

EU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

13.83

13.48

12.16

13.09

15.98

15.07

15.13

14.29

17.85

16.99

17.30

15.40

14.90

14.10

15.24

18.10

17.22

18.40

18.13

17.94

16.68

22.50

22.18

21.73

21.73

20.99

22.42

27.01

28.50

23.94

26.86

27.14

11.85

14.00

15.70

13.75

16.60

20.00

19.50

25.60

21.90

24.70

25.20

NC46 (IF)

NC46 (W.O.)

O.H.

H-90

NC46 (IF)

O.H.

NC40 (F.H.)

S.H.

NC46 (IF)

NC40 (F.H.)

H-90

NC50 (IF)

NC50 (W.O.)

O.H.

H-90

NC50 (IF)

O.H.

NC46 (X.H.)

F.H.

H-90

NC38 (S.H.)

NC50 (IF)

NC46 (X.H.)

F.H.

H-90

NC50 (X.H.)

5-1/2 F.H.

NC50 (X.H.)

5-1/2 F.H.

F.H.

F.H.

F.H.

O.D.

(IN.) NOM.

WT.

ADJ.*

WT.TYPE

O.D.

(IN.) TYPE

O.D.

(IN.)

I.D.

(IN.)

DRIFT

I.D.

(IN.)

ºTENSILE

YIELD

STRENGTH

(LBS)

TORSION

YIELD

STRENGTH

(FT-LBS)

RECOMMENDED

MAKE-UP

TORQUE

(FT-LBS)

TENSILE

YIELD

STRENGTH

(LBS)

†TORSION

YIELD

STRENGTH

(FT-LBS)

WEIGHT

(LBS/FT)UPSET

DRILL PIPE DATA TOOL JOINT DATA DRILL PIPE DATA

CONNECTION

MECHANICAL PROPERTIES OF NEW TOOL JOINTSAND NEW GRADE E DRILL PIPE

4-1/2

4-1/2

5

5-1/2

5-1/2

6-5/8

*TOOL JOINT PLUS DRILL PIPEºTHE TENSILE STRENGTH OF THE TOOL JOINT PIN IS BASED ON 120,000 PSI YIELD AND THE CROSS SECTIONAL AREA AT THE ROOT OF THE THREAD 5/8 INCH FROM THE SHOULDER.†TORSIONAL YIELD STRENGTH BASED ON SHEAR STRENGTH OF 57.7% OF THE MINIMUM YIELD STRENGTH.

TADLOCK PIPE

2-7

7920

7920

8750

8750

14640

14640

16180

16180

20800

20800

23500

23500

25970

25970

33390

33390

33390

26710

29520

37950

29500

32600

41920

29500

29500

32600

32600

41920

41920

32690

36130

46460

32690

32690

36130

36130

175080

175080

193500

193500

271500

271500

300080

300080

385820

385820

343990

343990

380190

380190

488820

488200

488200

408850

451890

581000

361460

399500

513650

361460

361460

399500

399500

513650

513650

410550

453770

583420

410550

410550

453770

453770

6800

6900

6800

6900

13200

13200

13200

13200

17000

17200

20300

20900

22200

20900

26400

28100

30000

22200

26400

32900

33600

33600

39200

25400

35400

30000

35400

36300

35400

33600

33600

39600

30000

35400

30000

35400

313680

270040

313680

270040

495730

443760

495730

443760

623840

571870

649160

595810

708060

595810

836400

789090

897160

708060

836400

980000

901170

901170

1048430

776400

913470

897160

913470

1080120

913470

897160

901170

1048430

897160

913470

897160

913470

1.625

1.670

1.625

1.670

1.875

1.875

1.875

1.875

1.500

1.500

2.438

2.438

2.313

2.438

2.000

2.000

2.313

2.313

2.000

2.125

3.125

3.125

2.875

2.563

2.688

2.313

2.688

1.875

2.688

3.125

3.125

2.875

2.313

2.688

2.313

2.688

1-3/4

1-13/16

1-3/4

1-13/16

2

2

2

2

1-5/8

1-5/8

2-9/16

2-9/16

2-7/16

2-9/16

2-1/8

2-1/8

2-7/16

2-7/16

2-1/8

2-1/4

3-1/4

3-1/4

3

2-11/16

2-13/16

2-7/16

2-13/16

2

2-13/16

3-1/4

3-1/4

3

2-7/16

2-13/16

2-7/16

2-13/16

3-3/8

3-1/4

3-3/8

3-1/4

4-1/8

4

4-1/8

4

4-3/8

4-1/8

5

4-3/4

5

4-3/4

5

5

5-3/8

5

5

5-1/2

6

6

6

5-1/4

5-1/2

5-1/2

5-1/2

5-1/2

5-1/2

6

6

6

5-1/2

5-1/2

5-1/2

5-1/2

NC26 (IF)

SL-H90

NC26 IF

SL-H90

NC31 (IF)

SL-H90

NC31 (IF)

SL-H90

NC31 (IF)

SL-H90

NC38 (IF)

SL-H90

NC38 (IF)

SL-H90

NC38 (IF)

SL-H90

NC40 (4FH)

NC38 (IF)

NC38 (IF)

NC40 (4FH)

NC46 (IF)

NC46 (IF)

NC46 (IF)

NC40 (IF)

H-90

NC40 (FH)

H-90

NC40 (FH)

H-90

NC46 (IF)

NC46 (IF)

NC46 (IF)

NC40 (FH)

H-90

NC40 (FH)

H-90

EU

EU

EU

EU

EU

EU

EU

EU

EU

EU

EU

EU

EU

EU

EU

EU

EU

EU

EU

EU

EU

EU

EU

IU

IU

IU

IU

IU

IU

EU

EU

EU

IU

IU

IU

IU

7.08

6.91

7.08

6.91

10.89

10.83

10.89

10.83

11.20

11.11

14.32

14.09

14.38

14.09

14.45

14.69

14.95

16.54

16.61

17.43

15.92

15.92

16.06

15.16

15.57

15.65

15.57

15.82

15.57

17.87

17.87

18.06

17.41

17.30

17.41

17.30

NOM.

WT.

ADJ.*

WT. TYPE GRADE

2-9/16

3-3/16

3-7/8

4-1/2

4-1/2

4-1/2

4-3/16

4-3/16

4-3/16

4-3/16

4-3/16

4-3/16

4-1/2

4-1/2

4-1/2

4-3/16

4-3/16

4-3/16

4-3/16

O.D.

(IN.) TYPE

O.D.

(IN.)

I.D.

(IN.)

DRIFT

I.D.

(IN.)

ºTENSILE

YIELD

STRENGTH

(LBS)

TORSION

YIELD

STRENGTH

(FT-LBS)

TENSILE

YIELD

STRENGTH

(LBS)

†TORSION

YIELD

STRENGTH

FT-LBS

WEIGHT

(LBS-FT)UPSET

DRILL PIPE DATA TOOL JOINT DATA DRILL PIPE DATA

CONNECTION

MECHANICAL PROPERTIES OF NEW TOOL JOINTSAND NEW GRADE E DRILL PIPE

2-3/8

O.D.

(IN.)

2-7/8

3-1/2

4

6.65

10.40

13.30

14.00

15.50

15.70

X-95

G-105

S-135

X-95

X-95

G-105

G-105

S-135

S-135

X-95

G-105

S-135

X-95

X-95

G-105

G-105

X-95

X-95

G-105

G-105

X-95

X-95

G-105

G-105

S-135

S-135

X-95

X-95

G-105

G-105

S-135

S-135

S-135

X-95

G-105

S-135

*TOOL JOINT PLUS DRILL PIPEºTHE TENSILE STRENGTH OF THE TOOL JOINT PIN IS BASED ON 120,000 PSI YIELD AND THE CROSS SECTIONAL AREA AT THE ROOT OF THE THREAD 5/8 INCH FROM THE SHOULDER.†TORSIONAL YIELD STRENGTH BASED ON SHEAR STRENGTH OF 57.7% OF THE MINIMUM YIELD STRENGTH.

3400

3450

3400

3450

6600

6600

6600

6600

8500

8600

10150

10450

11100

10450

13200

14050

15000

11100

13200

16450

16800

16800

19600

12700

17700

15000

17700

18150

17700

16800

16800

20950

15000

17700

15000

17700

REC.

MAKE-UP

TROQUE

(FT-LBS)

TADLOCK PIPE

2-8

418700

462780

595000

418700

418700

418700

462780

462780

462780

595000

595000

595000

522320

577300

742240

522320

522320

522320

577300

577300

577300

742240

501090

501090

553830

553830

712070

712070

671520

671520

742200

742200

954260

553680

611960

786810

629810

696110

895000

18850

18850

22450

19800

17400

19450

19800

17400

19450

22450

22400

22600

22350

22350

28900

22450

22150

19450

25800

22150

22600

26900

22350

31100

25700

31100

31700

35500

28500

31100

31700

36250

38850

31100

36250

43400

36250

36250

43400

37700

37700

44900

39600

34800

38900

39600

34800

38900

44900

44800

45200

44700

44700

57800

44900

44300

38900

49600

44300

45200

53800

44700

62200

51400

62200

63400

71000

57000

62200

63400

72500

77700

62200

72500

86800

72500

72500

86800

939360

939360

1110240

1048430

976160

938150

1048430

976160

938150

1183910

1235340

1085410

1110240

1110240

1416480

1183920

1235400

938150

1307640

1235400

1055410

1419480

1110240

1448400

1269240

1448400

1551960

1619230

1416480

1619280

1551960

1619280

1778280

1448400

1619280

1925520

1619280

1619280

1925520

3.625

3.625

3.375

2.875

2.875

3.125

2.875

2.625

3.125

2.625

2.375

2.875

3.250

3.375

2.875

2.625

2.375

3.125

2.375

2.375

2.875

2.125

3.375

3.625

3.125

3.625

2.625

3.375

2.875

3.375

2.625

3.375

3.125

3.625

3.375

2.875

3.375

3.375

2.875

3-3/4

3-3/4

3-1/2

3

3

3-1/4

3

3

3-1/4

2-3/4

2-1/2

3

3-1/2

3-1/2

3

2-3/4

2-1/2

3-1/4

2-1/2

2-1/2

3

2-1/4

3-1/2

3-3/4

3-1/4

3-3/4

2-3/4

3-1/2

3

3-1/2

2-3/4

3-1/2

3-1/4

3-3/4

3-1/2

3

3-1/2

3-1/2

3

6-3/8

6-3/8

6-3/8

6-1/4

6

6

6-1/4

6

6

6-1/4

6-1/4

6

6-3/8

6-3/8

6-5/8

6-1/4

6

6

6-1/4

6

6

6-1/4

6-3/8

7

6-1/2

7

6-5/8

7-1/4

6-1/2

7

6-5/8

7-1/4

7-1/4

7

7-1/4

7-1/2

7-1/4

7-1/4

7-1/2

NC50 (IF)

NC50 (IF)

NC50 (IF)

NC46 (XH)

F.H.

H-90

NC46 (XH)

F.H.

H-90

NC46 (XH)

F.H.

H-90

NC50 (IF)

NC50 (IF)

NC50 (IF)

NC46 (XH)

F.H.

H-90

NC46 (XH)

F.H.

H-90

NC46 (XH)

NC50 (XH)

5-1/2 F.H.

NC50 (XH)

5-1/2 F.H.

NC50 (XH)

5-1/2 F.H.

NC50 (XH)

5-1/2 F.H.

NC50 (XH)

5-1/2 F.H.

5-1/2 F.H.

F.H.

F.H.

F.H.

F.H.

F.H.

F.H.

5

5

5

4-11/16

4-11/16

4-11/16

4-11/16

4-11/16

4-11/16

4-11/16

4-11/16

4-11/16

5

5

5

4-11/16

4-11/16

4-11/16

4-11/16

4-11/16

4-11/16

4-11/16

5-1/8

5-11/16

EU

EU

EU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

EU

EU

EU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

IEU

18.11

18.11

18.32

18.51

18.23

18.09

18.51

18.23

18.09

18.54

18.66

18.32

23.11

23.11

22.42

22.33

21.69

21.74

22.45

21.69

21.96

22.56

21.09

22.52

21.50

22.52

22.09

23.24

28.30

28.62

28.11

28.89

29.23

24.24

24.98

25.86

27.89

27.89

28.74

16.60

MECHANICAL PROPERTIES OF NEW TOOL JOINTSAND NEW GRADE E DRILL PIPE

X-95

G-105

S-135

X-95

X-95

X-95

G-105

G-105

G-105

S-135

S-135

S-135

X-95

G-105

S-135

X-95

X-95

X-95

G-105

G-105

G-105

S-135

X-95

X-95

G-105

G-105

S-135

S-135

X-95

X-95

G-105

G-105

S-135

X-95

G-105

S-135

X-95

G-105

S-135

20.00

19.50

25.60

21.90

24.70

4-1/2

5

5-1/2

*TOOL JOINT PLUS DRILL PIPEºTHE TENSILE STRENGTH OF THE TOOL JOINT PIN IS BASED ON 120,000 PSI YIELD AND THE CROSS SECTIONAL AREA AT THE ROOT OF THE THREAD 5/8 INCH FROM THE SHOULDER.†TORSIONAL YIELD STRENGTH BASED ON SHEAR STRENGTH OF 57.7% OF THE MINIMUM YIELD STRENGTH.

NOM.

WT.

ADJ.*

WT. TYPE GRADE

O.D.

(IN.) TYPE

O.D.

(IN.)

I.D.

(IN.)

DRIFT

I.D.

(IN.)

ºTENSILE

YIELD

STRENGTH

(LBS)

TORSION

YIELD

STRENGTH

(FT-LBS)

TENSILE

YIELD

STRENGTH

(LBS)

†TORSION

YIELD

STRENGTH

FT-LBS

WEIGHT

(LBS-FT)UPSET

DRILL PIPE DATA TOOL JOINT DATA DRILL PIPE DATA

CONNECTION

O.D.

(IN.)

REC.

MAKE-UP

TROQUE

(FT-LBS)

39020

43130

55450

39020

39020

39020

43130

43130

43130

55450

55450

55450

46660

51570

66300

46740

46740

46740

51660

51660

51660

66420

52140

52140

57600

57600

74100

74100

66190

66190

73160

73160

94060

64230

70990

91280

71660

79200

101830

TADLOCK PIPE

2-9

DR

ILC

O “

HE

VI-

WA

TE

” D

RIL

L P

IPE

DIM

EN

SIO

NA

L D

ATA

AN

D P

ER

FOR

MA

NC

E R

OP

ER

TIE

S

2-1/

16

2-9/

16

2-3/

4

3

.719

.719

.875

1.00

0

4

4-1/

2

5

5-1/

2

3-5/

8

4-1/

8

4-5/

8

5-1/

8

345,

400

407,

550

548,

075

691,

185

19.5

35

28,7

45

40,6

25

56,3

65

NC38

:3-1

/2 IF

NC40

:4 F

H

NC46

:4 IF

NC50

:4-1

/2 IF

4-3/

4

5-1/

4

6-1/

4

6-1/

2

2-3/

16

2-11

/16

2-7/

8

3-1/

8

748,

750

711,

475

1,02

4,50

0

1,26

6,00

0

17,5

75

23,5

25

38,8

00

51,3

75

9,90

0

13,2

50

21,8

00

29,4

00

26 28 42 50

810

870

1290

1550

---

---

40 48

---

---

1745

2090

3-1/

2

4

4-1/

2

5

I.D.

(IN.) B

WAL

L

THIC

K

(IN.)

CENT

ER

(IN.) C

ENDS

(IN.) D

TENS

ILE

YIEL

D

(LBS

)

TORS

IONA

L

YIEL

D

(FT

LBS)

CONN

ECTI

ON

O.D.

(IN.) E

I.D.

(IN.) F

TENS

ILE

YIEL

D

(LBS

)

TORS

IONA

L

YIEL

D

(FT-

LBS)

MAK

E-UP

TORQ

UE

(FT-

LBS)

WT/

FT.

WT/

JT

30 F

T.

WT/ FT.

WT/

JT

45 F

T.

NOM

.

SIZE (IN.) A

TUBE

TOOL

JOI

NTW

EIGH

T

NOM

. TUB

E

DIM

.UP

SET

SEC.

PERF

ORM

ANCE

PROP

ERTI

ESDI

MEN

SION

SPE

RFOR

MAN

CE P

ROPE

RTIE

SAP

PROX

IMAT

E W

EIGH

T

INCL

UDIN

G TU

BE &

JOI

NT (L

BS)

RANG

E II

RANG

E III

TADLOCK PIPE

2-10

TADLOCK PIPE

2-11

TOOL JOINT TYPES

API REGULARHUGHES OR REED ACME REGULARUNION TOOL

API FULL HOLEREED ACME FULL HOLEHUGHES ACME STREAMLINEHUGHES XTRA HOLEREED SEMI-INTERNAL FLUSHAPI INTERNAL FLUSHHYDRIL TYPE “IF” (INT. FLUSH EXT. UPSET)HYDRIL EIU (EXT. INT. UPSET)HYDRIL TYPE “F” (EXTERNAL FLUSH)HUGHES EXT. FLUSH ACME TYPEHUGHES EXT. FLUSH FULL HOLE TYPE

1R2-3/82-3/82-3/8

2-7/83-1/2§

1F-2R2-7/82-7/82-7/83-1/22-3/8

2-3/8

2-3/82-3/8§

3-1/2

2F-3Rº3-1/23-1/2

2-7/8

2-7/82-7/8

2-7/8

2-7/8§

4-1/2

3Fº

3-1/2§3-1/2§3-1/2§3-1/23-1/2

3-1/2§3-1/24-1/2

5

4-1/2

3-1/2 IF

4

3-1/2

SIZES4Rº

4-1/24-1/2

45-1/2–5-9/165-1/2–5-9/16

4Fº

4-1/2

4-1/2§4-1/2§4-1/2§4-1/24-1/2

4

4-1/2

5Rº5-1/2–5-9/16*5-1/2–5-9/165-1/2–5-9/16*

5

4-1/2

4-1/2§

6-5/8

6-5/8

5F-6Rº6-5/8†

6-5/86-5/8†

5-1/2–5-9/16§5-1/2–5-9/16§5-1/2–5-9/16§

55-1/2–5-9/16

6F8-5/8

6-5/8§

6-5/8

SPECIFICATION GUIDEBAKER DRILL PIPE FLOATS AND VALVES

DIMENSIONAL DATA

* If this diameter is the same, or smaller than standard tool joint ID, disregard it.

SIZEVALVE

1R1F-2R2F-3R

3F3-1/2IF

D

DIAMETER OF VALVE

1-21/321-29/322-13/322-13/163-1/8

R(D PLUS 1/32)

DIAMETER OF

RECESS FOR VALVE

1-11/161-15/162-7/162-27/323-5/32

L

LENGTH OF VALVE5-7/86-1/46-1/2

1010

T*DIAMETER

OFRECESS

FORTOTCO SPIDER

1-15/161-1/2

1-29/322-7/162-11/16

SIZEVALVE

4R4F5R

5F-6R6F

D

DIAMETER OFVALVE

3-15/323-21/323-7/8

4-25/325-11/16

R(D PLUS 1/32)

DIAMETER OF

RECESS FORVALVE3-1/2

3-11/163-29/324-13/165-23/32

L

LENGTH OF VALVE8-5/16

129-3/411-3/414-5/8

T*DIAMETER

OFRECESS

FORTOTCO SPIDER

2-15/163-1/43-3/8

4-9/325-3/16

* Interchangeable† Interchangeable

§ Float Body in these sizes has smaller I.D. than Standard Tool Jointº Sizes available in both Model “F” and Model “G”; all other are available in Model “F” only

TADLOCK PIPE

CONNECTIONS & MAKE UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4WEIGHTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5GROOVES FOR ELEVATORS & SLIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6CAPACITIES OF ELEVATORS/SPIDERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7BOTTLENECK ELEVATOR BORES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8HINGED STRIPPING BOWLS & PLUGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8KELLYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10MAXIMUM CONE DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12BIT SIZES AND CLEARANCES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15

DRILL COLLARS AND CONNECTIONS

TADLOCK PIPE

3-1

TYPE

NC23

PAC3

API I.F.

NC26

SLIM HOLE

EXTRA HOLE

DBL STREAMLINE

MOD. OPEN

API I.F.

NC31

SLIM HOLE

NC35

EXTRA HOLE

SLIM HOLE

MOD. OPEN

API I.F.

NC38

SLIM HOLE

H-904

FULL HOLE

NC40

MOD. OPEN

DBL STREAMLINE

SIZE

(IN.)

API

2-7/8

2-3/8

API

2-7/8

2-7/8

3-1/2

2-7/8

2-7/8

API

3-1/2

API

3-1/2

4

3-1/2

3-1/2

API

4-1/2

3-1/2

4

API

4

4-1/2

O.D.

(IN.)

3

3-1/8

3-1/4

3

3-1/8

3-1/4

3-1/2

3-3/4

3-3/4

3-7/8

4-1/8

3-7/8

4-1/8

4-1/4

4-1/2

4-1/2

4-3/4

5

4-1/4

4-1/2

4-3/4

5

5-1/4

4-3/4

5

5-1/4

5-1/2

4-3/4

5

5-1/4

5-1/2

5

5-1/4

5-1/2

5-3/4

6

1

*2,500

*3,300

4,000

2-13/16

8,300

8,300

8,300

8,300

*8,700

10,400

10,400

10,400

*10,800

12,100

12,100

12,100

12,100

1-1/4

*2,500

*3,300

3,400

*3,800

*4,900

5,200

*4,600

5,500

*4,100

*5,300

*8,000

*4,600

*7,300

*8,800

10,000

1-1/2

*2,500

*2,600

2,600

*3,800

4,200

4,200

*4,600

4,700

*4,100

*5,300

*8,000

*4,600

*7,300

*8,800

9,300

1-3/4

2,900

2,900

2,900

3,700

3,700

*4,100

*5,300

7,400

*4,600

*7,300

8,100

8,100

*8,900

12,100

12,100

*5,100

*8,400

*11,900

13,200

13,200

*9,900

*13,800

16,000

16,000

*8,700

*12,700

*16,900

18,500

*10,800

*15,100

*19,700

20,400

20,400

2

*4,600

6,800

6,800

6,800

*8,900

10,800

10,800

*5,100

*8,400

11,700

11,700

11,700

*9,900

*13,800

14,600

14,600

*8,700

*12,700

16,700

16,700

*10,800

*15,100

18,600

18,600

18,600

2-1/4

*8,900

9,200

9,200

*5,100

*8,400

10,000

10,000

10,000

*9,900

12,800

12,800

12,800

*8,700

*12,700

15,000

15,000

*10,800

*15,100

16,900

16,900

16,900

2-1/2

7,400

7,400

7,400

*5,100

8,200

8,200

8,200

8,200

*9,900

10,900

10,900

10,900

*8,700

*12,700

13,100

13,100

*10,800

14,800

14,800

14,800

14,800

CONNECTION MINIMUM MAKE-UP TORQUE IN FOOT-POUNDS2

BORE OF DRILL COLLAR (IN INCHES)

DRILL COLLARSCONNECTIONS AND RECOMMENDED MAKE UP TORQUE1

(see Remarks on page 3-4)

NOTE: In each connection size and type group, torque values apply to all connection types in the group when used with the same drill collar outside collar diameter and bore; i.e., 2-3/8 API I.F., API NC26 and 2-7/8 Slim Hole connections used with 3-1/2 x 1-1/4 drill collars all have the same minimum make-up torque of 4600 ft.-lbs. and the BOX is the weaker member.

* Torque figures preceded by an asterisk indicate the BOX as the weaker member for the corrresponding outside diameter (O.D.) and bore. The PIN is the weaker member for all other torque values.

TADLOCK PIPE

3-2

SIZE

(IN.)

4

4-1/2

API

4-1/2

4-1/2

API

4

5

4-1/2

4-1/2

5

4-1/2

API

5

5

5-1/2

5-1/2

TYPE

H-904

API REGULAR

NC44

API FULL HOLE

EXTRA HOLE

NC46

API I.F.

DBL. STREAMLINE

MOD. OPEN

H-904

H-904

API I.F.

NC50

EXTRA HOLE

MOD. OPEN

DBL. STREAMLINE

H-904

O.D.

(IN.)

5-1/4

5-1/2

5-3/4

6

6-1/4

5-1/2

5-3/4

6

6-1/4

5-3/4

6

6-1/4

6-1/2

5-1/2

5-3/4

6

6-1/4

6-1/2

5-3/4

6

6-1/4

6-3/4

5-3/4

6

6-1/4

6-1/2

6-3/4

6-1/4

6-1/2

6-3/4

7

6-1/4

6-1/2

6-3/4

7

7-1/4

6-3/4

7

7-1/4

7-1/2

3-2

DRILL COLLARSCONNECTIONS AND RECOMMENDED MAKE UP TORQUE1

(see Remarks on page 3–4)

NOTE: In each connection size and type group, torque values apply to all connection types in the group when used with the same drill collar outside collar diameter and bore; i.e., 2-3/8 API I.F., API NC26 and 2-7/8 Slim Hole connections used with 3-1/2 x 1-1/4 drill collars all have the same minimum make-up torque of 4600 ft.-lbs. and the BOX is the weaker member.

* Torque figures preceded by an asterisk indicate the BOX as the weaker member for the corrresponding outside diameter (O.D.) and bore. The PIN is the weaker member for all other torque values.

CONNECTION MINIMUM MAKE-UP TORQUE IN FOOT-POUNDS2

BORE OF DRILL COLLAR (IN INCHES)

2

*12,500

*17,300

*22,300

23,500

23,500

*15,400

*20,300

23,400

23,400

*20,600

25,000

25,000

25,000

*12,900

*17,900

*23,300

27,000

27,000

2-1/4

12,500

17,300

21,500

21,500

21,500

15,400

20,300

21,600

21,600

*20,600

23,300

23,300

23,300

*12,900

*17,900

*23,300

25,000

25,000

*17,600

*23,200

28,000

28,000

*17,600

*23,400

28,500

28,500

28,500

*25,000

31,500

35,000

35,000

*22,800

*29,500

*36,000

38,000

38,000

*34,000

*41,500

42,500

42,500

2-1/2

12,500

17,300

19,400

19,400

19,400

15,400

19,400

19,400

19,400

*20,600

21,200

21,200

21,200

*12,900

*17,900

22,800

22,800

22,800

*17,600

*23,200

25,500

25,500

*17,600

*23,400

26,000

26,000

26,000

*25,000

*31,500

33,000

33,000

*22,800

*29,500

35,000

35,500

35,500

*34,000

40,000

40,000

40,000

2-13/16

*12,500

16,500

16,500

16,500

16,500

*15,400

16,200

16,200

16,200

18,000

18,000

18,000

18,000

*12,900

*17,900

19,800

19,800

19,800

*17,600

22,200

22,200

22,200

*17,600

23,000

23,000

23,000

23,000

*25,000

29,500

29,500

29,500

*22,800

*29,500

32,000

32,000

32,000

*34,000

36,500

36,500

36,500

3

*12,900

17,700

17,700

17,700

17,700

*17,600

20,200

20,200

20,200

*17,600

21,000

21,000

21,000

21,000

*25,000

27,000

27,000

27,000

*22,800

*29,500

30,000

30,000

30,000

34,000

34,000

34,000

34,000

3-1/4

*22,800

26,500

26,500

26,500

26,500

TADLOCK PIPE

3-3

DRILL COLLARSCONNECTIONS AND RECOMMENDED MAKE UP TORQUE1

(see Remarks on page 3-4)

NOTE: In each connection size and type group, torque values apply to all connection types in the group when used with the same drill collar outside collar diameter and bore; i.e., 2-3/8 API I.F., API NC26 and 2-7/8 Slim Hole connections used with 3-1/2 x 1-1/4 drill collars all have the same minimum make-up torque of 4600 ft.-lbs. and the BOX is the weaker member.

* Torque figures preceded by an asterisk indicate the BOX as the weaker member for the corrresponding outside diameter (O.D.) and bore. The PIN is the weaker member for all other torque values.

SIZE(IN.)

5-1/2

5-1/2

API

6-5/8

6-5/8

API

5-1/2

6-5/8

API

API

TYPE

API REGULAR

API FULL HOLE

NC56

API REGULAR

H-904

NC61

API I.F.

API FULL HOLE

NC70

NC77

O.D.(IN.)

6-3/47

7-1/47-1/2

77-1/47-1/27-3/47-1/47-1/27-3/4

87-1/27-3/4

88-1/47-1/27-3/4

88-1/4

88-1/48-1/28-3/4

98

8-1/48-1/28-3/4

99-1/48-1/28-3/4

99-1/49-1/2

99-1/49-1/29-3/4

1010-1/4

1010-1/410-1/210-3/4

11

2-1/4*31,500*39,00042,00042,000

2-1/2*31,500*39,00039,50039,500*32,500*40,500*49,00051,000*40,000*48,50051,00051,000*46,000*55,00057,00057,000*46,000*55,00059,50059,500*54,000*64,00072,00072,00072,000*56,000*66,00074,00074,00074,00074,000

2-13/16*31,50036,00036,00036,000*32,500*40,50047,00047,000*40,00048,00048,00048,000*46,00053,00053,00053,000*46,000*55,00056,00056,000*54,000*64,00068,00068,00068,000*56,000*66,00070,00070,00070,00070,000*67,000*78,00083,00083,00083,000*75,000*88,000

*101,000107,000107,000107,000

3*31,50033,50033,50033,500*32,500*40,50045,00045,000*40,00045,00045,00045,000*46,00050,00050,00050,000*46,00053,00053,00053,000*54,000*64,00065,00065,00065,000*56,000*66,00067,00067,00067,00067,000*67,000*78,00080,00080,00080,000*75,000*88,000

*101,000105,000105,000105,000*107,000*122,000*138,000143,000143,000

3-1/4

*32,500*40,50041,50041,500*40,00042,00042,00042,000*46,00047,00047,00047,000*46,00049,50049,50049,500*54,00061,00061,00061,00061,000*56,00063,00063,00063,00063,00063,000*67,00076,00076,00076,00076,000*75,000*88,000100,000100,000100,000100,000*107,000*122,000*138,000138,000138,000

3-1/2

*56,00059,00059,00059,00059,00059,000*67,00072,00072,00072,00072,000*75,000*88,00095,00095,00095,00095,000

*107,000*122,000133,000133,000133,000

3-3/4

66,50066,50066,50066,50066,500*75,000*88,00090,00090,00090,00090,000

*107,000*122,000128,000128,000128,000

CONNECTION 1111BORE OF DRILL COLLAR (IN INCHES)

TADLOCK PIPE

3-4

SIZE

(IN.)

7

7

7-5/8

7-5/8

7-5/8

7-5.8

8-5/8

8-5/8

8-5/8

8-5/8

TYPE

H-904

H-904 (WITH LOW

TORQUE

FACE)

API REGULAR

API REGULAR

(WITH LOW

TORQUE FACE)

H-904

H-904

(WITH LOW

TORQUE FACE)

API REGULAR

API REGULAR

(WITH LOW

TORQUE FACE)

H-904

H-904

(WITH LOW

TORQUE FACE)

O.D.

(IN.)

8

8-1/4

8-1/2

8-3/4

9

8-1/2

8-3/4

9

9-1/4

9-1/2

9-1/4

9-1/2

9-3/4

10

9

9-1/4

9-1/2

9-3/4

10

10-1/4

10-1/2

10

10-1/4

10-1/2

10-3/4

11

10-1/4

10-1/2

10-3/4

11

11-1/4

2-13/16

*53,000

*63,000

71,500

*67,500

74,000

DRILL COLLARSCONNECTIONS AND RECOMMENDED MAKE UP TORQUE1

NOTE: In each connection size and type group, torque values apply to all connection types in the group when used with the same drill collar outside collar diameter and bore; i.e., 2-3/8 API I.F., API NC26 and 2-7/8 Slim Hole connections used with 3-1/2 x 1-1/4 drill collars all have the same minimum make-up torque of 4600 ft.-lbs. and the BOX is the weaker member.

* Torque figures preceded by an asterisk indicate the BOX as the weaker member for the corresponding outside diameter (O.D.) and bore. The PIN is the weaker member for all other torque values.

1 Recommended make-up torque calculations assume the thorough application to all threads and shoulders of a thread compound which contains either 40 – 60% by weight finely powdered metallic zinc or 60% by weight finely powdered metallic lead and never more than 0.3% sulfur. Calculations also assume use of the modified Jack Screw Formula contained in API RP 7G, Appendix A, Paragraph A.8, and a unit stress of 62,500 PSI in the box or pin, whichever is weaker.

2 Normal torque range = tabulated value plus 10%. Higher values may be used under extreme conditions.3 Make-up torque for 2-7/8 PAC based on 87,500 PSI stress and other factors in 1, above.4 Make-up torque for H-90 based on 56,000 PSI stress and other factors in 1, above.

CONNECTION MINIMUM MAKE-UP TORQUE IN FOOT-POUNDS

BORE OF DRILL COLLAR (IN INCHES)

3

*53,000

*63,000

68,500

*67,500

71,000

*60,000

*71,000

*83,000

88,000

88,000

*72,000

*85,000

91,000

91,000

*72,000

*85,500

*98,000

*91,000

*105,000

112,500

112,500

*108,000

*123,000

139,000

*112,000

*129,000

*112,500

*128,500

*92,500

*110,000

*128,000

3-1/4

*53,000

*63,000

65,000

66,500

66,500

*60,000

*71,000

*83,000

83,000

83,000

*72,000

*85,000

87,000

87,000

*72,000

*85,500

*98,000

*91,000

*105,000

108,000

108,000

*108,000

*123,000

134,000

*112,000

*129,000

*112,500

*128,500

*92,500

*110,000

*128,000

3-1/2

*53,000

60,500

60,500

62,000

62,000

*60,000

*71,000

79,000

79,000

79,000

*72,000

82,000

82,000

82,000

*72,000

*85,5000

*98,000

*91,000

103,500

103,500

103,500

*108,000

*123,000

129,000

*112,000

*129,000

*112,500

*128,500

*92,500

*110,000

*128,000

3-3/4

*60,000

*71,000

74,000

74,000

74,000

*72,000

77,000

77,000

77,000

*72,000

*85,500

95,500

*91,000

98,000

98,000

98,000

*108,000

123,000

123,000

*112,000

*129,000

*112,500

*128,500

*92,500

*110,000

*128,000

TADLOCK PIPE

3-5

DRILL COLLAR WEIGHT (POUNDS PER FOOT)

NOTE 1: To determine weights of standard drill collars not shown use the following formula: (AREA O.D. – AREA I.D.) x 3.408 = Wt./Ft. See Area Chart in Section 7, page 6.

NOTE 2: To determine approximate weights of spiral drill collars, find the pounds per foot for a collar of the same size in the above chart and multiply by 96%; for example, a collar with an O.D. of 6” and an I.D. of 2” = 85 pounds per foot above; 85 x .96 = 81.6 pounds per foot (an approximation).

NOTE 3: To determine class weights, multiply by number of feet; for example, a 30’ class collar with an O.D. of 6” and an I.D. of 2” weighs 85 pounds per foot; 85 x 30 = 2550 pounds.

1-3/4

2-7/8

3

3-1/8

3-1/4

3-1/2

3-5/8

3-3/4

4

4-1/8

4-1/4

4-1/2

4-3/4

5

5-1/4

5-1/2

5-3/4

6

6-1/4

6-1/2

6-3/4

7

7-1/4

7-1/2

7-3/4

8

8-1/4

8-1/2

8-3/4

9

9-1/4

9-1/2

9-3/4

10

10-1/4

10-1/2

10-3/4

11

11-1/4

11-1/2

11-3/4

12

DRILL COLLAR I.D. (IN.)COLLAR O.D.

(IN.) 7/8

6

20

22

24

1

19

21

23

26

30

32

35

40

43

46

51

1-3/16

18

20

22

25

29

31

34

39

42

45

50

57

1-1/4

18

20

22

24

29

31

33

39

41

44

50

56

63

1-1/2

16

18

20

22

27

29

32

37

39

42

48

54

61

68

75

82

90

98

107

116

125

134

144

154

165

176

187

199

210

223

234

248

261

275

289

303

317

334

348

365

379

1-3/4

14

16

18

20

24

27

29

35

37

40

46

52

59

65

73

80

88

96

105

114

123

132

142

152

163

174

185

197

208

221

232

245

259

273

287

301

315

331

346

362

377

2

11

13

15

18

22

24

27

32

35

38

43

50

56

63

70

78

85

94

102

111

120

130

139

150

160

171

182

194

206

218

230

243

257

270

283

298

313

328

343

359

374

2-1/4

9

11

13

15

19

22

24

29

32

35

41

47

53

60

67

75

83

91

99

108

117

127

137

147

157

168

179

192

203

216

227

240

254

268

281

296

310

325

340

356

371

2-1/2

5

7

9

12

16

18

21

26

29

32

37

44

50

57

64

72

79

88

96

105

114

124

133

144

154

165

176

188

200

212

224

237

251

264

277

292

307

321

336

352

368

2-3/4

4

6

8

13

15

17

23

25

28

34

40

47

54

61

68

76

84

93

102

111

120

130

140

151

162

173

185

197

209

221

234

247

261

275

289

304

319

334

349

365

2-13/16

14

16

22

24

27

33

39

46

53

60

67

75

83

92

100

110

119

129

139

150

160

172

184

195

208

220

232

246

260

274

288

303

318

333

348

364

3

14

19

21

24

30

36

43

50

57

64

72

80

89

98

107

116

126

136

147

158

169

181

192

205

216

229

243

257

270

285

299

314

329

345

361

3-1/4

17

20

26

32

39

46

53

60

68

76

85

93

103

112

122

132

143

154

165

177

188

201

212

225

239

253

266

281

295

310

325

341

357

3-1/2

15

21

28

34

41

48

56

64

72

80

89

98

108

118

128

138

149

160

172

184

196

209

221

235

248

261

276

291

306

320

336

352

3-3/4

23

29

36

43

51

59

67

75

84

93

103

113

123

133

144

155

167

179

191

204

216

230

243

256

271

286

301

315

331

347

4

24

31

38

46

54

62

70

79

88

98

108

118

128

139

150

162

174

186

199

212

225

238

251

266

281

296

310

326

342

4-1/4

18

25

33

40

48

56

65

74

83

92

102

112

123

134

145

157

168

181

193

206

219

233

247

261

276

290

306

321

337

TADLOCK PIPE

3-6

* A and B dimensions are from the nominal O.D.s of new drill collars.† Angle C and D dimensions are reference and approximations.NOTE: API RP7G States: “These dimensions are not to be construed as API Standard.”

DRILL COLLAR GROOVES FOR ELEVATORS & SLIPSGROOVE DIMENSIONS

BASED ON DRILL COLLAR O.D.

DRILL COLLAR GROOVES FOR ELEVATORS & SLIPS

DRILL COLLAR

O.D. RANGES

4 – 4-5/8

4-3/4 – 5-5/8

5-3/4 – 6-5/8

6-3/4 – 8-5/8

8-3/4 – LARGER

ELEV. GROOVE

DEPTH A*

7/32

1/4

5/16

3/8

7/16

R

1/8

1/8

1/8

3/16

1/4

C†

4º

5º

6º

7-1/2º

9º

SLIP GROOVE

DEPTH B*

3/16

3/16

1/4

1/4

1/4

D†

3-1/2º

3-1/2º

5º

5º

5º

TADLOCK PIPE

3-7

SLX-100

---100100100100100------------------------------

SIZE (O.D.)(IN.)

1.600 – 1.9002-3/8 – 2-7/8

3-1/24

4-1/2 (REG. F.H.)5 – 5-1/2 – 4-1/2 (IF)

6-5/8 – 77-5/8 – 8-5/8

9-5/810-3/411-3/413-3/8

1618-5/8

2024-1/2

SLX-65

6565------------------------------------------

SLX-150

------------------150150150150150150150150150---

SLX-250

---------------------------------------------250

SIZE (O.D.)2-3/82-7/8

3-1/2 (FH & IF)4

4-1/2 (REG. & FH)5 – 4-1/2 (IF)

5-1/2

GG---------350350350350

BJ “A” SERIES COLLAR TYPE ELEVATORSRated Capacities in Tons

RATED CAPACITY OF ELEVATORS AND SPIDERSBJ TYPE LYT ELEVATORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 TONSBJ TYPE MYT ELEVATORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 TONSBJ TYPE YT TUBING ELEVATORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 TONSBJ TYPE YC CASING ELEVATORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 TONSBJ SLIP GRIP CASING ELEVATORS 7-5/8 . . . . . . . . . . . . . . . . . . . . . . . . 150 TONS

BJ SLIP CASING ELEVATORS 10-3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 TONSBJ SLIP GRIP CASING ELEVATORS 13-3/8 . . . . . . . . . . . . . . . . . . . . . . . 200 TONS10-3/4 BJ SLIP GRIP CASING ELEVATORS AND/OR SPIDER . . . . . . . . . . 500 TONS13-3/8 BJ CASING SPIDER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 TONS13-3/8 BJ SLIP GRIP CASING ELEVATOR AND/OR SPIDER . . . . . . . . . . . 350 TONS

SIZE (O.D.)(IN.)

1.0501.3151.6601.9002-3/82-7/83-1/2

44-1/25-1/26-5/8

77-5/88-5/8

SLA 100---------------------------100100100100100

TA-150---------------------------150150150150150

TA-100------------100100100100100---------------

TA-65------65656565656565---------------

TA-35353535353535------------------------

AA------------------250275275300300300 ------

MAA------------175175175225225250250250------

RA------------125125125150150175175175------

BJ “G” SERIES 18° TYPE ELEVATORSCapacities in Tons

MGG------250250250250250

RG150150150175175200200

MG100100100100100100---

BJ TYPE “SLX” SIDE DOOR COLLAR TYPE ELEVATORSRated Capacities in Tons

TADLOCK PIPE

3-8

A

B

C

6-7/8

5

6

7-1/2

6-3/8

6

*7-9/16

5-1/2

10

*9-7/8

7

10

*13-1/16

10-1/8

12

NECK DIAMETER

2-9/16

3

3-3/16

3-11/16

3-7/8

4-3/16

4-1/2

4-11/16

5

5-1/8

5-11/16

C

TOP

BORE

4-1/4

4-3/8

4-3/4

5-1/4

5-1/2

6-1/2

6-3/4

6-3/4

7-1/8

7-1/8

7-7/8

D

CENTER

BORE

2-21/32

3-3/32

3-9/32

3-25/32

3-31/32

4-9/32

4-25/32

4-25/32

5-1/4

5-1/4

5-13/16

E

T-100

---

---

---

---

---

1-1/2

1-1/2

1-1/2

1-1/2

1-1/2

---

E

T-150

---

1-5/8

1-5/8

1-5/8

1-5/8

1-5/8

1-5/8

1-5/8

1-5/8

1-5/8

1-5/8

E

T-250 &

T-350

---

---

---

---

---

3-3/8

3-3/8

3-3/8

3-3/8

3-3/8

3-3/8

2-3/8

2-7/8

3-1/2

4

4-1/2

5

5-1/2

IF

R & FH

IF

R & FH

IF

FH

IF

R & FH

IF

EIU

R & FH

DRILL PIPE SIZE

BAASH-ROSS 18° ELEVATOR BORE CHART

*AVAILABLE WITH REDA CABLE SLOT

50 TON CAPACITY 100 TON CAPACITY 150 TON CAPACITY

HINGED STRIPPING BOWLS

TADLOCK PIPE

3-9

KELLY SIZE

(API)

3

3-1/2

4-1/4

5-1/4

6

STANDARD

6-5/8 REG.

6-5/8 REG.

6-5/8 REG.

6-5/8 REG.

6-5/8 REG.

OPTIONAL

4-1/2 REG.

4-1/2 REG.

4-1/2 REG.

LOWER PIN*

CONNECTION (STD.)

2-3/8 IF (NC26)

2-7/8 IF (NC31)

3-1/2 IF (NC38)

4 IF (NC46)1

5-1/2 F.H.2

MAX. BORE

(IN.) A

1-1/2

1-3/4

2-1/4

3

3-1/2

ACROSS FLATS

(IN.) B

3

3-1/2

4-1/4

5-1/4

6

ACROSS CORNER

(IN.) C

3-3/8

3-31/32

4-13/16

5-31/32

6-13/16

RADIUS

(IN.) R

1/4

1/4

5/16

3/8

3/8

14-1/2 (NC50) - LOWER PIN CONNECTION WITH 3-1/2 I.D., A IS OPTIONAL2NC56 - LOWER PIN CONNECTION OPTIONAL*BOX - LEFT HAND CONNECTION; PIN - RIGHT HAND CONNECTION.

HEXAGON KELLYSDIMENSIONS

UPPER BOX CONNECTION*

TADLOCK PIPE

3-10

ACROSS

FLAT

3

3-1/2

3-3/4

4-1/4

4-27/32

5-1/4

6

STANDARD

6-5/8 REG.

6-5/8 REG.

6-5/8 REG.

6-5/8 REG.

6-5/8 REG.

6-5/8 REG.

OPTIONAL

4-1/2 REG.

4-1/2 REG.

4-1/2 REG.

4-1/2 REG.

KELLY SIZE

(API)

2-1/2

3

3-1/2

4-1/4

5-1/4

6†

LOWER PIN*

CONNECTION (STD.)

2-3/8 IF (NC26)

2-7/8 IF (NC31)

3-1/2 IF (NC38)

4 IF (NC46)1

5-1/2 F.H.2

6-5/8 REG.

MAX BORE

(IN.) A

1-1/4

1-3/4

2-1/4

2-13/16

3-1/4

3-1/2

ACROSS FLATS

(IN.) B

2-1/2

3

3-1/2

4-1/4

5-1/4

6

ACROSS CORNER

(IN.) C

3-9/32

3-15/16

4-17/32

5-9/16

6-29/32

7-7/8

RADIUS

(IN.) R

5/16

3/8

1/2

1/2

5/8

3/414-1/2 (NC50) - LOWER PIN CONNECTION OPTIONAL2NC56 - LOWER PIN CONNECTION OPTIONAL*BOX - LEFT HAND CONNECTION; PIN - RIGHT HAND CONNECTION.

†NON-API

SQUARE KELLYSDIMENSIONS

UPPER BOX CONNECTION*

ACROSS

FLAT

2-1/2

3

3-1/2

4-1/4

5-1/4

6

KELLY WEIGHTSPOUNDS PER FOOT

(Drive Section)

Square Kelly

1-1/16

18.3

1-1/4

17.1

25.8

1-1/2

24.0

35.6

1-3/4

21.8

33.5

2

31.0

2-1/4

28.2

47.9

2-1/2

44.7

2-3/4

41.3

73.5

2-7/8

39.3

71.6

3

69.7

3-1/2

89.6

BORE OF HEXAGON KELLY

Hexagon Kelly

BORE OF SQUARE KELLY

1-1/4

22.3

1-1/2

20.5

30.1

35.3

1-3/4

27.9

33.2

2

25.4

30.7

2-1/4

22.6

27.9

39.6

56.4

2-1/2

36.4

53.3

2-3/4

32.9

49.8

60.9

2-7/8

31.0

47.9

59.0

3

45.9

57.1

3-1/4

41.7

52.9

3-1/2

48.4

73.2

4

63.2

3-1/4

65.5

TADLOCK PIPE

3-11

MAXIMUM CONE DIMENSIONSREED ROCK BIT COMPANY

MILLED TOOTH THREE CONE ROCK BITSSIZE RANGE

3-3/43-7/8

4-5/8 – 4-3/45-7/8 – 6

6-1/8 – 6-1/46-1/2 – 6-5/8

6-3/47-5/8 – 7-3/4

7-7/88-3/8 – 8-5/8

8-3/49-1/2 – 9-5/8

9-7/810-5/8

1112

12-1/413-1/213-3/4

14-3/4 – 1517-1/218-1/2

A1-27/321-27/322-1/4

2-53/643-1/32

3-11/643-9/32

3-23/323-31/324-13/644-7/32

4-27/324-15/165-9/325-7/325-7/86-1/32

6-53/646-53/647-5/168-3/49-1/32

B2-31/642-35/643-1/16

3-53/644-1/32

4-17/644-25/644-59/645-17/645-45/645-55/646-25/646-29/647-1/64

7-21/647-3/4

88-27/329-1/16

9-57/6411-9/32

11-25/32

MAXIMUM CONE DIMENSIONSREED ROCK BIT COMPANY

INSERT TYPE THREE CONE ROCK BITSSIZE RANGE

6-1/8 – 6-1/46-1/2 – 6-5/8

6-3/47-5/8 – 7-3/4

7-7/88-3/8 – 8-5/8

8-3/49-1/2 – 9-5/8

9-7/810-5/8

1112

12-1/417-1/2

A2-15/322-41/642-25/323-1/8

3-23/643-9/16

3-11/164-3/164-9/324-7/16

4-19/325-3/165-3/87-1/2

B3-13/164-1/84-3/16

4-11/165-1/85-1/2

5-19/325-7/86-5/166-1/26-5/87-3/8

810-1/2

TADLOCK PIPE

3-12

SIZE3-3/43-7/84-1/84-3/45-7/8

66-1/86-1/46-1/26-3/47-7/88-3/88-1/28-3/49-1/29-7/810-5/8

1112-1/413-3/414-3/417-1/2

202426

A1-29/321-29/321-31/322-41/642-15/162-49/642-51/643-1/643-7/643-5/16

3-23/324-7/644-1/44-5/16

4-43/644-55/645-23/645-17/326-5/646-9/327-3/64

8-27/649-1/16

10-49/6411-7/32

B2-15/322-17/322-41/643-3/16

3-25/323-31/324-1/644-1/64

4-13/644-11/325-17/645-27/645-25/325-15/166-31/646-43/64

76-61/648-3/32

8-51/649-17/32

10-49/6412-19/6415-31/6416-21/32

MAXIMUM CONE DIMENSIONSHUGHES TOOL COMPANY ROCK BITS

MAXIMUM CONE DIMENSIONSSMITH TOOL THREE CUTTER ROCK BITS

SIZE RANGE5-5/8

5-7/8 – 6-1/46-1/2 – 6-3/4

7-3/87-5/8 – 8

8-1/8 – 8-1/28-5/8 – 9

9-1/8 – 9-1/29-5/8 – 9-7/8

10-1/2 – 11-1/212 – 12-1/4

13-3/415

17-1/226

A2-7/8

3-7/643-13/324-45/643-31/32

4-1/84-17/324-9/32

4-15/165-27/64

6-1/87

7-5/88-1/2

12-5/8

B3-13/164-3/16

4-35/644-27/325-17/645-26/326-1/32

6-13/326-41/647-5/32

7-61/649

9-5/811-3/815-3/4

MAXIMUM CONE DIMENSIONSSMITH TOOL TWO-CONE ROCK BITS

SIZE RANGE6-1/2 – 6-3/4

7-5/8 – 88-5/8 – 9

9-5/8 – 9-7/812 – 12-1/4

A2-49/643-11/323-27/324-19/645-11/64

B4-41/64

5-5/85-3/4

6-41/648-23/32

TADLOCK PIPE

3-13

4-1/2

5

5-1/2

6-5/8

7

9.50

10.50

11.60

13.50

11.50

13.00

15.00

18.00

14.00

15.50

17.00

20.00

23.00

20.00

24.00

28.00

32.00

17.00

20.00

23.00

26.00

29.00

32.00

35.00

38.00

4.090

4.052

4.000

3.920

4.560

4.494

4.408

4.276

5.012

4.950

4.892

4.778

4.670

6.049

5.921

5.791

5.675

6.538

6.456

6.366

6.276

6.184

6.094

6.004

5.920

--

--

--

--

--

--

4.198

4.198

--

4.736

4.701

4.701

4.610

--

5.781

5.731

5.615

--

--

6.171

6.171

6.123

6.032

5.940

5.860

3-7/8

3-7/8

3-7/8

3-3/4

4-1/4

4-1/4

4-1/4

4-1/8

4-3/4

4-3/4

4-3/4

4-5/8

4-1/2

5-7/8

5-5/8

5-5/8

4-3/4

6-1/4

6-1/4

6-1/8

6-1/8

6

6

5-7/8

5-7/8

2-3/8

2-3/8

2-7/8

2-7/8

2-7/8

2-7/8

2-3/8

3-1/2

3-1/2

3-1/2

2-7/8

3-1/2

10

11

16

16

16

16

12

29

24

24

15

30

30

30

30

29

29

29

24

.215

.177

.125

.170

.310

.244

.158

.151

.262

.200

.142

.153

.170

.174

.296

.166

.925

.288

.206

.241

.151

.184

.219

.129

.295

7/32

11/64

1/8

11/64

5/16

1/4

5/32

5/32

17/64

13/64

9/64

5/32

11/64

17/64

19/64

11/64

59/64

9/32

13/64

1/4

5/32

3/16

7/32

1/8

3/64

--

--

--

--

--

--

4-1/8

4-1/8

--

4-5/8

4-5/8

4-5/8

4-1/2

--

5-5/8

5-5/8

4-3/4

--

--

6-1/8

6-1/8

6

5-7/8

5-7/8

5-5/8

--

--

--

--

--

--

2-3/8

2-3/8

--

2-7/8

2-7/8

2-7/8

2-3/8

--

3-1/2

3-1/2

2-7/8

--

--

3-1/2

3-1/2

3-1/2

3-1/2

3-1/2

3-1/2

--

--

--

--

--

--

11

11

--

16

16

16

12

--

24

24

15

--

--

30

30

29

29

29

24

--

--

--

--

--

--

.073

.073

--

.111

.076

.076

.110

--

.156

.106

.865

--

--

.046

.046

.123

.157

.065

.235

--

--

--

--

--

--

5/64

5/64

--

7/64

5/64

5/64

7/64

--

5/32

7/64

55/64

--

--

3/64

3/64

1/8

5/32

1/16

15/64

UPSET ID

X-LINE

(IN.)

ID 8 RD

& BUTT.

(IN.)

WEIGHT

T&C

LBS/FT

O.D.

(IN.) DEC.

WT.

LBS.

CONN.

API

REG. FRAC.(IN.)FRAC.DEC.

WT.

LBS.

SIZE

(IN.)

CONN.

API

REG.

CASING DATA

API CASING — BIT SIZES AND CLEARANCESDRILL BIT SPECIFICATIONS

8 ROUND AND BUTTRESS CASING X-LINE CASING

CLEARANCE SIZE CLEARANCE

DIAMETRICAL CLEARANCES LISTED ABOVE ARE BASED ON THE INSIDE DIAMETER OF CASING (OR JOINT ID FOR X-LINE CASING.)CASING LISTED FROM API SPEC 5A, TABLE 1.1, MARCH 1979.

TADLOCK PIPE

3-14

7-5/8

8-5/8

9-5/8

10-3/4

11-3/4

24.00

26.40

29.70

33.70

39.00

24.00

28.00

32.00

36.00

40.00

44.00

49.00

32.30

36.00

40.00

43.50

47.00

53.50

32.75

40.50

45.50

51.00

55.50

42.00

47.00

54.00

60.00

7.025

6.969

6.875

6.765

6.625

8.097

8.017

7.921

7.825

7.725

7.625

7.511

9.001

8.921

8.835

8.755

8.681

8.535

10.192

10.050

9.950

9.850

9.760

11.084

11.000

10.880

10.772

--

6.770

6.770

6.705

6.565

--

--

7.725

7.725

7.663

7.565

7.451

--

--

8.665

8.665

8.621

8.475

--

--

9.719

9.629

9.629

--

--

--

--

6-3/4

6-3/4

6-5/8

6-5/8

6-1/4

7-7/8

7-7/8

7-5/8

7-5/8

6-3/4

6-3/4

6-3/4

8-3/4

8-3/4

8-5/8

8-1/2

8-1/2

8-3/8

9-7/8

9-7/8

9-5/8

9-5/8

9-1/2

10-5/8

10-5/8

10-5/8

10-5/8

3-1/2

4-1/2

4-1/2

4-1/2

4-1/2

3-1/2

3-1/2

3-1/2

4-1/2

5-1/2

OR

6-5/8

4-1/2

4-1/2

6-5/8

45

45

38

38

30

73

73

68

68

42

42

42

90

90

89

86

86

86

135

135

135

135

135

145

145

145

145

.275

.219

.250

.140

.375

.222

.142

.271

.200

.975

.875

.761

.251

.171

.210

.255

.181

.160

.317

.175

.325

.225

.260

.459

.375

.255

.147

9/32

7/32

1/4

9/64

3/8

7/32

9/64

17/64

13/64

31/32

7/8

49/64

1/4

11/64

13/64

1/4

3/16

5/32

5/16

11/64

21/64

7/32

17/64

29/64

3/8

1/4

5/32

6-5/8

6-5/8

6-5/8

6-1/4

--

--

7-5/8

7-5/8

6-3/4

6-3/4

6-3/4

--

--

8-1/2

8-1/2

8-1/2

8-3/8

--

--

9-5/8

9-1/2

9-1/2

--

3-1/2

3-1/2

3-1/2

3-1/2

--

--

4-1/2

4-1/2

3-1/2

3-1/2

3-1/2

--

--

4-1/2

4-1/2

4-1/2

4-1/2

--

--

6-5/8

6-5/8

6-5/8

--

38

38

38

30

--

--

68

68

42

42

42

--

--

86

86

86

86

--

--

135

135

135

--

.145

.145

.085

.315

--

--

.100

.100

.913

.815

.706

--

--

.165

.165

.121

.100

--

--

.094

.129

.129

--

9/64

9/64

5/64

5/16

--

--

3/32

3/32

29/32

13/16

45/64

--

--

11/64

11/64

1/8

7/64

--

--

3/32

1/8

1/8

UPSET ID

X-LINE

(IN.)

ID 8 RD

& BUTT

(IN.)

WEIGHT

T&C

LBS/FT

O.D.

(IN.) DEC.

WT.

LBS.

CONN.

API

REG. FRAC.(IN.)FRAC.DEC.

WT.

LBS.

SIZE

(IN.)

CONN.

API

REG.

CASING DATADRILL BIT SPECIFICATIONS

8 ROUND AND BUTTRESS CASING X-LINE CASING

CLEARANCE SIZE CLEARANCE

API CASING — BIT SIZES AND CLEARANCES

DIAMETRICAL CLEARANCES LISTED ABOVE ARE BASED ON THE INSIDE DIAMETER OF CASING (OR JOINT ID FOR X-LINE CASING).CASING LISTED FROM API SPEC 5A, TABLE 1.1, MARCH 1979.

(NO X-LINE IN THIS SIZE)

TADLOCK PIPE

3-15

13-3/8

16

18-5/8

20

48.00

54.50

61.00

68.00

72.00

65.00

75.00

84.00

87.50

94.00

106.50

133.00

12.715

12.615

12.515

12.415

12.347

15.250

15.125

15.010

17.755

19.124

19.000

18.730

12-1/4

12-1/4

12-1/4

12-1/4

12

15

14-3/4

14-3/4

17-1/2

18-1/2

18-1/2

18-1/2

6-5/8

6-5/8

OR

7-5/8

6-5/8

OR 7-5/8

6-5/8

OR

7-5/8

211

211

211

211

201

300

500

615

.465

.365

.265

.165

.347

.250

.375

.260

.255

.624

.500

.230

15/32

23/64

17/64

11/64

11/32

1/4

3/8

17/64

1/4

5/8

1/2

15/64

FRAC.DEC.

WT.

LBS

CONN.

API

REG.

SIZE

(IN.)

I.D.

(IN.)

WEIGHT

T&C

LBS/FT

O.D.

(IN.)

API CASING — BIT SIZES AND CLEARANCESCASING DATA DRILL BIT SPECIFICATIONS

CLEARANCE

*DIAMETRICAL CLEARANCES LISTED ABOVE ARE BASED ON THE INSIDE DIAMETER OF CASING (OR JOINT ID FOR X-LINE CASING).

TADLOCK PIPE

API TUBING REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1SETTING DEPTHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2API-T&C NON-UPSET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4AZTEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4API-T&C EXTERNAL UPSET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6API-INTEGRAL JOINT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6ARMCO NU-LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8ARMCO SEAL-LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8ARMCO I-J NU-LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10HYDRIL CS& CS-CB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12 A-95 & A-95-CB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12 PH-4 & PH-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14NL ATLAS BRADFORD DSS-HTC & IJ-3SS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-16 IJ-4S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-18 TC-4S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-20 FL-4S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-22QUANEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-24REED RTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-26VALLOUREC VAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-28MINI-VAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-28USS IMPROVED BUTTRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-30WHEELING-PITTSBURGH SEAMLESS 8-ACME. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-30LINE PIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31STANDARD STEEL PIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

TUBING

TADLOCK PIPE

4-1

DRIFT TESTTUBING SIZE

2-7/8” AND SMALLER

3-1/2” AND LARGER

DRIFT MANDREL LENGTH

42”

42”

DRIFT MANDREL DIAMETER

ID MINUS 3/32”

ID MINUS 1/8”

TENSILE REQUIREMENTS

RANGE LENGTHS

TOTAL RANGE LENGTH, INCL

PERMISSIBLE VARIATION, MAX

RANGE LENGTH FOR 100% OF CARLOAD: PERMISSIBLE LENGTH, MIN.

RANGE 1

(FT.)

20–24

2

20

RANGE 2

(FT.)

28–32

2

28

RANGE 3

(FT.)

---

---

---

TOLERANCES

API TUBING REQUIREMENTS

H-40

J-55

C-75

L-80

N-80

P-105

40000

55000

75000

80000

80000

105000

80000

80000

90000

95000

110000

135000

60000

75000

95000

95000

100000

120000

GRADEMIN. PSI MAX. PSI

TENSILE STRENGTH

MINIMUM PSI

YIELD STRENGTH

TUBING SIZE

2-3/8 – 3-1/2

4

4-1/2

4” AND SMALLER

4-1/2 & LARGER

ALL

SIZES

DIMENSION

O.D.

WALL THICKNESS

I.D.

TOLERANCE

+3/32” – 1/32

+7/64” – 1/32

+7/64” – .75% O.D.

+.031 – .031

+.75% O.D. – .75% O.D.

– 12.5%

GOVERNED BY O.D. TOLERANCES

TYPE

EUE

NUE

---

---

TADLOCK PIPE

4-2

SIZE

NOM.

3/4

1

1-1/4

1-1/2

2

2

2-1/2

2-1/2

3

3

3-1/2

4

O.D.

(IN.)

1.050

1.315

1.660

1.900

2.375

2.375

2.875

2.875

3.500

3.500

4.000

4.500

BARRELS†

PER

100 FEET

0.065

0.107

0.185

0.251

0.386

0.338

0.578

0.495

0.868

0.734

1.172

1.520

TENSION

29,130

29,860

29,290

29,970

29,230

29,840

---

---

COLLAPSE

24,740

32,100

22,420

32,140

20,880

32,140

---

---

TENSION

22,200

21,960

22,270

22,040

22,200

22,750

22,300

22,830

22,270

22,730

22,360

22,580

COLLAPSE

24,590

23,280

19,780

18,050

18,850

24,450

17,860

24,480

16,850

24,500

14,080

12,000

TENSION

15,260

15,090

15,310

15,150

15,260

---

15,330

---

15,310

---

15,370

15,520

COLLAPSE

16,900

16,000

13,580

12,400

12,960

---

12,290

---

11,840

---

10,540

9,150

WALL

(IN.)

0.113

0.133

0.140

0.145

0.190

0.254

0.217

0.308

0.254

0.375

0.262

0.271

SETTING DEPTHS FOR EXTERNAL UPSET TUBINGSETTING DEPTH (FEET) EXTERNAL UPSET*

J-55 N-80 P-105

*NO SAFETY FACTOR. TENSION VALUES ARE IN AIR. COLLAPSE VALUES ARE IN 90#/CU.FT. (12#/GAL) MUD.†42 GALLONS PER BARREL.

SIZE

NOM.

3/4

1

1-1/4

1-1/2

2

2

2-1/2

2-1/2

3

3

3-1/2

4

O.D.

(IN.)

1.050

1.315

1.660

1.900

2.375

2.375

2.875

2.875

3.500

3.500

4.000

4.500

BARRELS†

PER

100 FEET

0.065

0.107

0.185

0.251

0.386

0.338

0.578

0.495

0.868

0.734

1.172

1.520

TENSION

20,520

22,490

21,630

24,300

---

25,440

---

---

COLLAPSE

24,740

32,100

22,420

32,140

---

32,140

---

---

TENSION

11,140

12,880

13,520

13,890

15,630

17,740

16,480

18,520

18,140

19,390

15,150

16,560

COLLAPSE

24,590

23,280

19,780

18,050

18,850

24,450

17,860

24,480

16,850

24,500

10,570

12,000

TENSION

7,600

8,850

9,280

9,540

10,750

---

11,340

---

11,880

---

10,420

11,380

COLLAPSE

16,900

16,000

13,580

12,400

12,960

---

12,290

---

11,840

---

8,200

9,150

WALL

(IN.)

0.113

0.133

0.140

0.145

0.190

0.254

0.217

0.308

0.254

0.375

0.262

0.271

SETTING DEPTHS FOR NON-UPSET TUBINGSETTING DEPTH (FEET) NON-UPSET*

J-55 N-80 P-105

*NO SAFETY FACTOR. TENSION VALUES ARE IN AIR. COLLAPSE VALUES ARE IN 90#/CU.FT. (12#/GAL) MUD.†42 GALLONS PER BARREL.

TADLOCK PIPE

4-3

DIMENSIONAL DATA

CONNECTION

API

SIZE O.D.

(IN.)

1 (1.315)

1-1/4 (1.660)

1-1/2 (1.900)

2-1/16

WEIGHT

INT. JT.

(LB/FT)

1.8

2.4

2.9

3.25

I.D.

(IN.)

1.049

1.380

1.610

1.751

WALL

THICK.

(IN.)

.133

.140

.145

.156

DRIFT

DIAMETER

(IN.)

.955

1.286

1.516

1.656

O.D.

(IN.)

1.552

1.883

2.113

2.330

I.D.

(IN.)

.970

1.300

1.530

1.690

PIN

LENGTH

(IN.)

1.125

1.250

1.375

1.438

API

SIZE-O.D.

(IN.)

3/4 (1.050)

1 (1.315)

1-1/4 (1.660)

1-1/2 (1.900)

2-3/8

2-7/8

3-1/2

4

4-1/2

WEIGHT

T&C

(LB/FT)

1.14

1.70

2.30

2.75

4.00

4.60

5.80

6.40

8.60

7.70

9.20

10.20

12.70

9.50

12.60

I.D.

(IN.)

.824

1.049

1.380

1.610

2.041

1.995

1.867

2.441

2.259

3.068

2.992

2.922

2.750

3.548

3.958

WALL

THICKNESS

(IN.)

.113

.133

.140

.145

.167

.190

.254

.217

.308

.216

.254

.289

.375

.226

.271

DRIFT

DIAMETER

(IN.)

.730

.955

1.286

1.516

1.947

1.901

1.773

2.347

2.165

2.943

2.797

2.797

2.625

3.423

3.833

PIN

LENGTH

(IN.)

1.094

1.125

1.250

1.375

1.625

1.625

1.625

2.063

2.063

2.313

2.313

2.313

2.313

2.375

2.563

O.D.

(IN.)

1.313

1.660

2.054

2.200

2.875

2.875

2.875

3.500

3.500

4.250

4.250

4.250

4.250

4.750

5.200

LENGTH

(IN.)

3-3/16

3-1/4

3-1/2

3-3/4

4-1/4

4-1/4

4-1/4

5-1/8

5-1/8

5-5/8

5-5/8

5-5/8

5-5/8

5-3/4

6-1/8

API TUBING - T & CNON-UPSET

COUPLING

*THREADS CUT WITH 3/4” TAPER PER FOOT.10 THREADS PER INCH EXCEPT FOR 4” AND 4-1/2” TUBING, WHICH HAVE 8 PER INCH.

AZTEC INTEGRAL JOINT

THREADS CUT WITH 3/4” TAPER PER FOOT.10 THREADS PER INCH.1” INTERCHANGEABLE WITH 3/4” API EUE OR 1” NON-UPSET.1-1/4” INTERCHANGEABLE WITH 1-1/4” NON-UPSET.1-1/2” INTERCHANGEABLE WITH 1-1/2” API NON-UPSET.2-1/16” INTERCHANGEABLE WITH 1-1/2” API EUE.

TADLOCK PIPE

4-4

PERFORMANCE PROPERTIES

J-55

PSI

10,560

10,000

8,500

7,750

7,190

8,100

---

7,680

---

5,970

7,400

8,330

---

5,110

5,720

P-105

---

---

---

---

---

1280

1840

1850

2790

---

2620

---

4060

---

---

N-80

(FT-LBS)

250

380

490

570

850

1020

1460

1470

2210

1700

2070

2410

3210

1740

2440

J-55

180

270

350

410

610

730

---

1050

---

1210

1480

1723

---

1240

1740

P-105

LBS

---

---

---

---

---

94,400

135,100

138,500

209,100

---

208,800

---

323,300

---

---

N-80

LBS

12,700

21,900

31,100

38,200

60,200

71,900

102,900

105,500

159,300

130,100

159,000

185,100

246,300

144,000

208,700

J-55

LBS

8,700

15,100

21,400

26,300

41,400

49,500

---

72,600

---

89,500

109,400

127,300

---

99,000

143,500

P-105

PSI

---

---

---

---

---

14,700

19,650

13,870

19,690

---

13,340

---

19,690

---

---

N-80

PSI

15,070

14,160

11,800

10,680

9,840

11,200

14,970

10,570

15,000

8,640

10,160

11,560

15,000

7,910

8,440

J-55

PSI

10,360

9,730

8,120

7,350

6,770

7,700

---

7,260

---

5,940

6,980

7,950

---

5,440

5,790

P-105

PSI

---

---

---

---

---

15,460

20,060

14,010

20,090

---

13,050

---

20,090

---

---

N-80

PSI

15,370

14,550

12,360

11,280

9,980

11,780

15,280

11,170

15,300

7,870

10,530

12,120

15,310

6,590

7,500

COLLAPSE PRESSURE BURST PRESSURE JOINT YIELD STRENGTHOPTIMUM MAKE-UP

TORQUE

J-55

PSI

10,000

8,500

7,750

7,690

COLLAPSE PRESSUREOPTIMUM

MAKE-UP

TORQUE*

(FT-LBS)

350

375

425

450

P-105

LBS

47,700

65,900

80,500

98,110

N-80

LBS

36,300

50,200

61,400

74,750

J-55

LBS

25,400

34,500

42,200

51,390

P-105

PSI

18,580

15,500

14,020

13,890

N-80

PSI

14,160

11,800

10,680

10,590

J-55

PSI

9,730

8,120

7,350

7,290

P-105

PSI

19,090

16,220

14,290

14,060

N-80

PSI

14,550

12,360

11,280

11,180

BURST PRESSURE JOINT YIELD STRENGTH

API TUBING - T & CNON-UPSET

AZTEC INTEGRAL JOINT

*APPLIES TO ALL GRADES.

TADLOCK PIPE

4-5

DIMENSIONAL DATA

API

SIZE-O.D.

(IN.)

3/4 (1.050)

1 (1.315)

1-1/4 (1.660)

1-1/2 (1.900)

2-3/8

2-7/8

3-1/2

4

4-1/2

WEIGHT

T&C

(LB./FT.)

1.20

1.80

2.40

2.90

4.70

5.95

6.50

8.70

9.30

12.95

11.00

12.75

LENGTH

(IN.)

3-1/4

3-1/2

3-3/4

3-7/8

4-7/8

4-7/8

5-1/4

5-1/4

5-3/4

5-3/4

6

6-1/4

SP.CL.

(IN.)

---

---

---

---

2.910

3.460

4.180

---

---

REG.

(IN.)

1.660

1.900

2.200

2.500

3.063

3.063

3.668

3.668

4.500

4.500

5.000

5.563

PIN

LENGTH

(IN.)

1.125

1.250

1.375

1.438

1.938

1.938

2.125

2.125

2.375

2.375

2.500

2.625

UPSET

DIAMETER

(IN.)

1.315

1.469

1.812

2.093

2.593

2.593

3.093

3.093

3.750

3.750

4.250

4.750

DRIFT

DIAMETER

(IN.)

.730

.955

1.286

1.516

1.901

1.773

2.347

2.165

2.867

2.625

3.351

3.833

WALL

THICK.

(IN.)

.113

.133

.140

.145

.190

.254

.217

.308

.254

.375

.262

.271

I.D.

(IN.)

.824

1.049

1.380

1.610

1.995

1.867

2.441

2.259

2.992

2.750

3.476

3.958

COUPLING

O.D.

CONNECTION

API

SIZE-O.D.

(IN.)

1 (1.315)

1-1/4 (1.660)

1-1/2 (1.900)

2-1/16*

WEIGHT

INT.JT.

(LB/FT)

1.72

2.10

2.33

2.40

2.76

3.25

I.D.

(IN.)

1.049

1.410

1.380

1.650

1.610

1.751

WALL

THICK.

(IN.)

.133

.125

.140

.125

.145

.156

DRIFT

DIAMETER

(IN.)

.955

1.316

1.286

1.556

1.516

1.656

O.D.

(IN.)

1.550

1.880

1.880

2.110

2.110

2.325

I.D.

(IN.)

.970

1.301

1.301

1.531

1.531

1.672

PIN

LENGTH

(IN.)

1.125

1.250

1.250

1.375

1.375

1.438

API TUBING - T & CEXTERNAL UPSET

THREADS CUT WITH 3/4” TAPER PER FOOT.10 THREADS PER INCH FROM 3/4” THRU 1-1/2” TUBING.8 THREADS PER INCH FROM 2-3/8” THRU 4-1/2” TUBING.

API INTEGRAL JOINT TUBING

THREADS CUT WITH 3/4” TAPER PER FOOT.10 THREADS PER INCH.1” INTERCHANGEABLE WITH 3/4” API EUE OR 1” NUE1-1/4” INTERCHANGEABLE WITH 1-1/4” API NUE1-1/2” INTERCHANGEABLE WITH 1-1/2” API NUE2-1/16” INTERCHANGEABLE WITH 1-1/2” API EUE*2-1/16 SIZE HAS A 2.094 UPSET O.D. ON THE PIN, ALL OTHER SIZES HAVE FLUSH O.D.S

TADLOCK PIPE

4-6

PERFORMANCE PROPERTIES

H-40

PSI

7,270

5,570

6,180

4,920

5,640

5,590

N-80

550

---

690

---

810

1030

J-55

(FT.-LBS)

400

500

500

580

580

740

H-40

310

380

380

450

450

570

N-80

LBS

31,940

---

44,370

---

53,780

71,370

J-55

LBS

21,960

30,500

30,500

36,970

36,970

49,000

H-40

LBS

15,970

22,180

22,180

26,890

26,890

35,690

N-80

PSI

14,160

---

11,810

---

10,680

10,590

J-55

PSI

9,730

7,250

8,120

6,330

7,350

7,290

H-40

PSI

7,080

5,270

5,900

4,610

5,340

5,290

N-80

PSI

14,550

---

12,360

---

11,280

11,180

J-55

PSI

10,000

7,660

8,500

6,640

7,750

7,690

COLLAPSE PRESSURE BURST PRESSURE JOINT YIELD STRENGTH OPTIMUM MAKE-UP TORQUE

J-55

PSI

10,560

10,000

8,500

7,750

8,100

---

7,680

---

7,400

---

6,590

5,720

P-105

---

---

---

---

2270

2830

2910

3810

4050

5430

---

---

N-80

(FT.-LBS)

830

790

960

1220

1800

2240

2300

3020

3200

4290

4560

4020

J-55

600

570

690

880

1290

---

1650

---

2280

---

2560

2860

P-105

LBS

---

---

---

---

136,940

177,710

190,260

260,810

271,970

386,570

---

---

N-80

LBS

26,610

39,510

53,480

63,960

104,340

135,400

144,960

198,710

207,220

294,530

246,140

288,040

J-55

LBS

18,290

27,610

36,770

43,970

71,730

---

99,660

---

142,460

---

169,220

198,030

P-105

PSI

---

---

---

---

14,700

19,650

13,870

19,690

13,340

19,690

---

---

N-80

PSI

15,070

14,160

11,800

10,680

11,200

14,970

10,570

15,000

10,160

15,000

9,170

8,440

J-55

PSI

10,360

9,730

8,120

7,350

7,700

---

7,260

---

6,980

---

6,300

5,790

P-105

PSI

---

---

---

---

15,460

20,060

14,010

20,090

13,050

20,090

---

---

N-80

PSI

15,370

14,550

12,360

11,280

11,780

15,280

11,170

15,300

10,530

15,310

8,800

7,500

COLLAPSE PRESSURE BURST PRESSUREPIPE*

TENSILE YIELD STRENGTH*

OPTIMUM MAKE-UP

TORQUE

API TUBING - T & CEXTERNAL-UPSET

*JOINT EFFICIENCY 100% OR BETTER.

API INTEGRAL JOINT TUBING

TADLOCK PIPE

4-7

DIMENSIONAL DATA

COUPLING

O.D.

LENGTH

(IN.)

5.75

6.50

7.00

SP.CL.

(IN.)

2.700

---

---

---

3.200

---

---

---

---

3.865

---

---

---

---

REG.

(IN.)

2.875

2.875

2.875

2.875

3.500

3.500

3.500

3.500

3.500

4.250

4.250

4.250

4.250

4.250

API

SIZE

O.D.

(IN.)

2-3/8

2-7/8

3-1/2

WEIGHT

T&C

(LB/FT)

4.70

5.95

6.20

7.70

6.50

7.90

8.70

9.50

11.00

9.30

10.30

12.95

15.50

16.70

UPSET

O.D.

(IN.)

2.700

2.700

2.700

2.700

3.220

3.220

3.220

3.220

3.220

3.865

3.865

3.865

3.865

3.865

DRIFT

DIAMETER

(IN.)

1.901

1.773

1.759

1.609

2.347

2.229

2.165

2.101

1.971

2.867

2.797

2.625

2.477

2.355

WALL

THICKNESS

(IN.)

.190

.254

.261

.336

.217

.276

.308

.340

.405

.254

.289

.375

.449

.510

I.D.

(IN.)

1.995

1.867

1.853

1.703

2.441

2.323

2.259

2.195

2.065

2.992

2.922

2.750

2.602

2.480

COUPLINGAPI

SIZE

O.D.

(IN.)

2-3/8

2-7/8

3-1/2

WEIGHT

T&C

(LB/FT)

4.60

5.80

6.40

8.60

9.20

12.70

I.D.

(IN.)

1.995

1.867

2.441

2.259

2.992

2.750

WALL

THICK.

(IN.)

.190

.254

.217

.308

.254

.375

DRIFT

DIAMETER

(IN.)

1.901

1.773

2.347

2.165

2.867

2.625

LENGTH

(IN.)

6.00

6.75

7.25

SP.CL.

(IN.)

2.700

---

3.220

---

3.865

---

REG.

(IN.)

2.875

2.875

3.500

3.500

4.250

4.250

ARMCO NU-LOCK TUBING

THREADS CUT WITH 1” TAPER PER FOOT.6 THREADS PER INCH.

ARMCO SEAL-LOCK TUBING

THREADS CUT WITH 1” TAPER PER FOOT.6 THREADS PER INCH.

O.D.

TADLOCK PIPE

4-8

PERFORMANCE PROPERTIES

OPTIMUM

MAKE-UP

TORQUE†

(FT.LBS)

1200

1800

2500

J-55

PSI

8100

10510

10760

13360

7680

9550

10530

11470

13310

7400

8330

10530

12300

13690

P-105

LBS

136940

177710

182000

226000

190260

236000

260810

284000

330000

271970

306000

386570

451920

503100

N-80

LBS

104340

135400

139000

172000

144960

180000

198710

217000

251000

207220

233000

294530

344320

383300

J-55

LBS

71730

93090

95300

118400

99660

124000

136000

148000

172000

142460

160000

202000

236720

263500

P-105

PSI

14700

19650

20200

26010

13870

17650

19690

21730

25890

13330

15180

19690

23570

26770

N-80

PSI

11200

14970

15390

19810

10570

13450

15000

16560

19730

10160

11560

15000

17690

20400

J-55

PSI

7700

10290

10580

7260

9250

10320

11390

13570

6980

7950

10320

12350

14020

P-105

PSI

15460

20060

20540

25510

14010

18230

20090

21900

25410

13050

15920

20090

23480

26140

N-80

PSI

11780

15280

15650

19430

11170

13890

15300

16690

19360

10530

12120

15310

17890

19920

COLLAPSE PRESSURE BURST PRESSUREPIPE

TENSILE YIELD STRENGTH*

ARMCO NU-LOCK TUBING

*JOINT EFFICIENCY 100% OR MORE.†APPLIES TO ALL GRADES

OPTIMUM

MAKE-UP-

TORQUE†

(FT.-LBS)

1000

1200

1800

J-55

PSI

8100

---

7680

---

7400

P-105

LBS

136900

177700

190200

260000

271900

386500

N-80

LBS

104300

135400

144900

198700

207200

294500

J-55

LBS

71700

---

99600

---

142400

---

P-105

PSI

14700

19650

13870

19680

13330

19690

N-80

PSI

11200

14970

10570

15000

10160

15000

J-55

PSI

7700

---

7260

---

6980

---

P-105

PSI

15460

20060

14010

20090

13050

20090

N-80

PSI

11780

15280

11160

15300

10530

15310

COLLAPSE PRESSURE BURST PRESSUREPIPE*

TENSILE YIELD STRENGTH*

ARMCO SEAL-LOCK TUBING

*JOINT EFFICIENCY 100% OR MORE.†APPLIES TO ALL GRADES

TADLOCK PIPE

4-9

DIMENSIONAL DATA

ARMCO I-J NU-LOCK

THREAD CUT WITH 1” TAPER PER FOOT.6 THREADS PER INCH.

CONNECTIONAPI

SIZE

O.D.

(IN.)

2-3/8

2-7/8

3-1/2

WEIGHT

T&C

(LB/FT)

4.70

5.30

5.95

6.50

7.90

8.70

9.50

11.00

11.65

9.30

10.30

12.95

15.80

16.70

I.D.

(IN.)

1.995

1.939

1.867

2.441

2.323

2.259

2.195

2.065

1.995

2.992

2.922

2.750

2.548

2.480

WALL

THICKNESS

(IN.)

.190

.218

.254

.217

.276

.308

.340

.405

.440

.254

.289

.375

.476

.510

DRIFT

DIAMETER

(IN.)

1.901

1.845

1.773

2.347

2.229

2.165

2.101

1.971

1.901

2.867

2.797

2.625

2.423

2.355

I.D.

(IN.)

1.948

1.892

1.820

2.394

2.276

2.212

2.148

2.018

1.948

2.927

2.857

2.685

2.483

2.415

O.D.

(IN.)

2.700

2.750

2.800

3.220

3.375

3.375

3.450

3.500

3.500

3.900

3.950

4.250

4.250

4.250

PIN

LENGTH

(IN.)

2.438

2.438

2.438

2.813

2.813

2.813

2.813

2.813

2.813

3.063

3.063

3.063

3.063

3.063

TADLOCK PIPE

4-10

PERFORMANCE PROPERTIES

OPTIMUM

MAKE-UP

TORQUE†

(FT.-LBS)

1500

2000

2500

J-55

PSI

8,100

9,170

10,510

7,680

9,550

10,530

11,470

13,310

14,260

7,400

8,330

10,530

12,930

13,690

P-105

LBS

136,940

155,110

177,710

190,260

236,620

260,810

284,310

330,000

353,420

271,970

306,110

386,570

474,820

503,020

N-80

LBS

104,340

118,180

135,400

144,960

180,280

198,710

216,620

251,400

269,270

207,220

233,230

294,530

361,770

383,250

J-55

LBS

71,730

81,250

93,090

99,660

123,940

136,610

148,900

172,800

185,130

142,460

160,340

202,490

248,710

263,480

P-105

PSI

14,700

16,870

19,650

13,870

17,650

19,690

21,730

25,890

28,120

13,340

15,180

19,690

24,990

26,770

N-80

PSI

11,200

12,860

14,970

10,570

13,450

15,000

16,560

19,730

21,430

10,160

11,560

15,000

19,040

20,400

J-55

PSI

7,700

8,840

10,290

7,260

9,250

10,320

11,390

13,570

14,730

6,980

7,950

10,320

13,090

14,020

P-105

PSI

15,460

17,510

20,060

14,010

18,230

20,090

21,900

25,410

27,220

13,050

15,920

20,090

24,680

26,140

N-80

PSI

11,780

13,340

15,280

11,170

13,890

15,300

16,690

19,360

20,740

10,530

12,120

15,310

18,800

19,920

COLLAPSE PRESSURE BURST PRESSUREPIPE*

TENSILE YIELD STRENGTH*

ARMCO I-J NU-LOCK

*JOINT EFFICIENCY 100% OR MORE.†APPLIES TO ALL GRADES.

TADLOCK PIPE

4-11

DIMENSIONAL DATA

CONNECTION

O.D.

SP.CL.

(IN.)

1.300

---

1.525

---

1.858

---

---

2.094

---

---

2.295

2.407

2.655

2.700

3.166

3.859

3.914

4.359

4.861

4.890

REG.

(IN.)

1.327

1.327

1.552

1.600

1.883

1.927

1.927

2.113

2.162

2.179

2.335

2.460

2.705

2.750

3.220

3.915

3.980

4.417

4.920

4.955

I.D.

(IN.)

.687

.687

.970

.864

1.300

1.218

1.200

1.530

1.440

1.390

1.700

1.550

1.945

1.890

2.371

2.920

2.878

3.395

3.865

3.840

PIN

LENGTH

(IN.)

2.187

2.187

2.187

2.187

2.187

2.272

2.260

2.338

2.788

2.786

2.769

2,821

2,820

API

SIZE-O.D.

(IN.)

3/4 (1.050)

1 (1.315)

1-1/4 (1.660)

1-1/2 (1.900)

2-1/16

2-3/8

2-7/8

3-1/2

4

4-1/2

WEIGHT

INT.JT.

(LB/FT)

1.20

1.50

1.80

2.25

2.40

3.02

3.24

2.90

3.64

4.19

3.25

4.50

4.70

5.30

6.50

9.30

10.30

11.00

12.75

13.50

DRIFT

DIAMETER

(IN.)

.672

.648

.955

.848

1.286

1.184

1.170

1.516

1.406

1.368

1.657

1.519

1.901

1.845

2.347

2.867

2.797

3.351

3.833

3.795

WALL

THICKNESS

(IN.)

.113

.154

.133

.179

.140

.191

.198

.145

.200

.219

.156

.225

.190

.218

.217

.254

.289

.262

.271

.290

I.D.

(IN.)

.824

.742

1.049

.957

1.380

1.278

1.264

1.610

1.500

1.462

1.751

1.613

1.995

1.939

2.441

2.992

2.922

3.476

3.958

3.920

HYDRIL TUBING CS & CS-CB

8 THREADS PER INCH.INTERCHANGEABLE WITH HYDRIL A-95 AND A-95-CB.

CONNECTION

O.D.

SP.CL

(IN.)

1.858

2.094

2.300

2.630

3.155

3.805

4.315

4.825

REG.

(IN.)

1.898

2.134

2.325

2.700

3.220

3.905

4.405

4.910

I.D.

(IN.)

1.300

1.530

1.700

1.945

2.375

2.920

3.395

3.865

PIN

LENGTH

(IN.)

2.197

2.197

2.204

2.276

2.348

2.797

2.794

2.843

API

SIZE-O.D.

(IN.)

1-1/4 (1.660)

1-1/2 (1.900)

2-1/16

2-3/8

2-7/8

3-1/2

4

4-1/2

WEIGHT

INT.JT.

(LB/FT)

2.4

2.9

3.25

4.7

6.5

9.3

11

12.75

DRIFT

DIAMETER

(IN.)

1.286

1.516

1.656

1.901

2.347

2.867

3.351

3.833

WALL

THICKNESS

(IN.)

.140

.145

.156

.190

.217

.254

.262

.271

I.D.

(IN.)

1.380

1.610

1.751

1.995

2.441

2.992

3.476

3.958

HYDRIL TUBING A-95 & A-95-CB

8 THREADS PER INCH.INTERCHANGEABLE WITH HYDRIL CS AND CS-CB.

TADLOCK PIPE

4-12

PERFORMANCE PROPERTIES

J-55

PSI

8,500

7,750

7,690

8,100

7,680

7,400

6,590

5,720

P-105

---

---

900

1500

2100

3000

3500

4500

N-80

(FT.-LBS)

600

800

900

1500

2100

3000

3500

4500

J-55

400

600

700

1100

1500

2500

3000

3500

P-105

LBS

61,000

70,000

93,000

129,000

168,000

254,000

297,000

342,000

N-80

LBS

46,000

53,000

71,000

98,000

128,000

194,000

226,000

260,000

J-55

LBS

32,000

37,000

49,000

68,000

88,000

133,000

155,000

179,000

P-105

PSI

15,500

14,020

13,890

14,700

13,870

13,340

12,040

11,070

N-80

PSI

11,800

10,680

10,590

11,200

10,570

10,160

9,170

8,440

J-55

PSI

8,120

7,350

7,290

7,700

7,260

6,980

6,300

5,790

P-105

PSI

16,220

14,290

14,060

15,460

14,010

13,050

10,700

8,950

N-80

PSI

12,360

11,280

11,180

11,780

11,170

10,530

8,800

7,500

COLLAPSE PRESSURE BURST PRESSURE JOINT YIELD STRENGTH OPTIMUM MAKE-UP TORQUE

J-55

PSI

10,560

13,770

10,000

12,940

8,500

11,200

11,560

7,750

10,360

11,220

7,690

10,690

8,100

9,170

7,680

7,400

8,330

6,590

5,720

6,420

P-105

300

300

400

400

600

600

600

800

800

800

900

900

1500

1500

2100

3000

3000

3500

4500

4500

N-80

(FT.-LBS)

300

300

400

400

600

600

600

800

800

800

900

900

1500

1500

2100

3000

3000

3500

4500

4500

J-55

200

200

300

300

400

400

400

600

600

600

700

700

1100

1100

1500

2500

2500

3000

3500

3500

P-105

LBS

34,920

45,510

51,860

67,080

70,200

92,550

95,490

83,940

112,150

121,430

98,110

136,380

136, 940

155,110

190,260

271,970

306,110

323,060

378,050

402,740

N-80

LBS

26,610

34,680

39,510

51,110

53,480

70,500

72,750

63,960

85,450

92,500

74,750

103,900

104,340

118,180

144,960

207,220

233,230

246,140

288,040

306,850

J-55

LBS

18,290

23,840

27,610

35,140

36,770

48,480

50,020

43,970

58,750

63,600

51,390

71,430

71,730

81,250

99,660

142,460

160,340

169,220

198,030

211,000

P-105

PSI

19,780

26,590

18,580

25,010

15,500

21,140

21,920

14,020

19,340

21,180

13,890

20,050

14,700

16,870

13,870

13,340

15,180

12,040

11,070

11,840

N-80

PSI

15,070

20,530

14,160

19,060

11,800

16,110

16,700

10,680

14,740

16,140

10,590

15,270

11,200

12,860

10,570

10,160

11,560

9,170

8,440

9,020

J-55

PSI

10,360

14,120

9,730

13,100

8,120

11,070

11,480

7,350

10,130

11,090

7,290

10,500

7,700

8,840

7,260

6,980

7,950

6,300

5,790

6,200

P-105

PSI

20,170

26,280

19,090

24,700

16,220

21,380

22,060

14,290

19,780

21,420

14,060

20,410

15,460

17,510

14,010

13,050

15,920

10,700

8,950

10,350

N-80

PSI

15,370

20,020

14,550

18,820

12,360

16,290

16,810

11,280

15,070

16,320

11,180

15,550

11,780

13,340

11,170

10,530

12,120

8,800

7,500

8,540

COLLAPSE PRESSURE BURST PRESSUREPIPE*

TENSILE YIELD STRENGTH*OPTIMUM MAKE-UP TORQUE

HYDRIL TUBINGCS & CS-CB

*JOINT EFFICIENCY 100% OR MORE.

HYDRIL TUBINGA-95 & A-95-CB

TADLOCK PIPE

4-13

DIMENSIONAL DATA

CONNECTION

O.D.

SP.CL.

(IN.)

2.782

2.794

3.002

3.312

3.365

3.419

3.595

---

---

4.189

4.474

---

---

4.514

---

---

5.021

5.170

---

---

---

REG.

(IN.)

2.906

2.938

3.125

3.438

3.500

3.625

3.688

3.750

3.750

4.313

4.500

4.500

4.563

4.625

5.000

5.188

5.125

5.313

5.500

5.563

5.688

I.D.

(IN.)

1.805

1.795

1.645

2.265

2.200

2.130

2.030

2.000

1.945

2.687

2.485

2.406

2.375

3.275

2.920

2.700

3.765

3.560

3.420

3.300

3.160

PIN

LENGTH

(IN.)

2.978

2.969

2.936

2.951

2.942

2.918

2.918

4,125

4.125

3.236

3.226

4.125

4.110

3.236

4.625

4.602

3.259

3.236

4.630

4.625

4.620

API

SIZE-O.D.

(IN.)

2-3/8

2-7/8

3-1/2

4

4-1/2

WEIGHT

INT.JT.

(LB/FT)

5.95

6.2

7.7

7.9

8.7

9.5

10.7

11.0*

11.65*

12.95

15.80

16.70*

17.05*

13.4

19.0*

22.5*

15.5

19.2

21.6*

24.0*

26.5*

DRIFT

DIAMETER

(IN.)

1.773

1.759

1.609

2.229

2.165

2.101

1.997

1.971

1.901

2.625

2.423

2.355

2..315

3.215

2.875

2.655

3.701

3.515

3.375

3.255

3.115

WALL

THICKNESS

(IN.)

.254

.261

.336

.276

.308

.340

.392

.405

.440

.375

.476

.510

.530

.330

.500

.610

.337

.430

.500

.560

.630

I.D.

(IN.)

1.867

1.853

1.703

2.323

2.259

2.195

2.091

2.065

1.995

2.750

2.548

2.480

2.440

3.340

3.000

2.780

3.826

3.640

3.500

3.380

3.240

HYDRIL TUBINGPH-4* & PH-6

PH-4: 4 THREADS PER INCH.PH-6: 6 THREADS PER INCH.*ONLY THESE WEIGHTS ARE PH-4; ALL OTHER WEIGHTS ARE PH-6.

TADLOCK PIPE

4-14

PERFORMANCE PROPERTIES

J-55

PSI

10,510

10,760

13,360

9,550

10,530

11,470

12,960

13,310

14,260

10,530

12,930

13,690

14,130

8,330

12,030

14,220

7,620

9,510

10,860

11,990

13,240

P-105

2700

2700

2700

3500

3500

5500

5500

6500

6500

7000

7000

9500

10000

7000

10500

11500

7500

9500

12000

13000

14500

N-80

(FT.-LBS)

2200

2200

2200

3000

3000

4500

4500

5000

5000

5500

5500

7500

8000

5500

8500

9500

6000

7500

9500

10000

11500

J-55

1600

1600

1600

2200

2200

3200

3200

4000

4000

4000

4000

5500

6000

4000

6000

7500

4500

4500

7000

7500

8500

P-105

LBS

177,710

182,000

226,000

236,620

260,810

284,310

321,070

330,000

353,000

386,570

474,820

503,000

519,000

399,500

577,000

682,000

462,780

577,300

463,000

728,000

804,000

N-80

LBS

135,400

138,670

172,120

180,280

198,710

216,620

244,620

251,000

269,000

294,530

361,770

383,000

396,000

304,380

440,000

520,000

352,600

439,850

353,000

555,000

613,000

J-55

LBS

93,090

95,340

118,400

123,940

136,610

148,900

168,180

173,000

185,000

202,490

248,710

264,000

272,000

209,260

302,000

357,000

242,410

302,400

346,000

381,000

421,000

P-105

PSI

19,650

20,200

26,010

17,650

19,690

21,730

25,050

25,890

28,120

19,690

24,990

26,770

27,830

15,160

22,970

28,020

13,760

17,560

20,420

22,870

25,730

N-80

PSI

14,970

15,390

19,810

13,450

15,000

16,560

19,090

19,730

21,430

15,000

19,040

20,400

21,200

11,550

17,500

21,350

10,480

13,380

15,560

17,420

19,600

J-55

PSI

10,290

10,580

13,620

9,250

10,320

11,390

13,120

13,570

14,730

10,320

13,090

14,020

14,580

7,940

12,030

14,680

7,210

9,200

10,690

11,980

13,480

P-105

PSI

20,060

20,540

25,510

18,230

20,090

21,900

24,740

24,410

27,220

20,090

24,680

26,140

26,980

15,900

22,970

27,140

13,820

18,140

20,740

22,880

25,280

N-80

PSI

15,280

15,650

19,430

13,890

15,300

16,690

18,850

19,360

20,740

15,310

18,800

19,920

20,560

12,110

17,500

20,680

11,080

13,820

15,800

17,420

19,260

COLLAPSE PRESSURE BURST PRESSUREPIPE*

TENSILE YIELD STRENGTH*OPTIMUM MAKE-UP TORQUE

HYDRIL TUBINGPH-4 & PH-6

*JOINT EFFICIENCY 100% OR MORE.

TADLOCK PIPE

4-15

DIMENSIONAL DATA

API

SIZE-O.D.

(IN.)

1 (1.315)

1-1/4 (1.660)

1-1/2 (1.900)

2-1/16

2-3/8

2-7/8

3-1/2

4

4-1/2

WEIGHT

INTG.

JOINT

LB/FT

1.8

2.25

2.4

2.9

3.4

4.7

5.3

5.95

6.2

7.7

6.5

7.9

8.7

9.5

11.0

11.65

9.3

10.3

12.95

15.80

16.70

11

13.4

22.80

12.75

13.5

15.5

16.9

19.2

21.6

DRIFT

DIAMETER

(IN.)

.955

.863

1.286

1.516

1.656

1.901

1.845

1.773

1.759

1.609

2.347

2.229

2.165

2.101

1.971

1.901

2.867

2.797

2.625

2.423

2.355

3.351

3.215

2.655

3.833

3.795

3.701

3.629

3.515

3.375

WALL

THICKNESS

(IN.)

.133

.179

.140

.145

.156

.190

.218

.254

.261

.336

.217

.276

.308

.340

.405

.440

.254

.289

.375

.476

.510

.262

.330

.610

.271

.290

.337

.373

.430

.500

I.D.

(IN.)

1.049

.957

1.380

1.610

1.750

1.995

1.939

1.867

1.853

1.703

2.441

2.323

2.259

2.195

2.065

1.995

2.992

2.922

2.750

2.548

2.480

3.476

3.340

2.780

3.958

3.920

3.826

3.754

3.640

3.500

CONNECTION

DSS-HTC & IJ-3SSDSS-HTC

PIN

LENGTH

(IN.)

1.588

1.586

1.839

2.028

2.212

2.773

2.773

2.764

2.764

2.758

3.023

3.016

3.011

3.005

3.000

3.000

3.397

3.394

3.380

3.374

3.368

3.522

3.514

3.500

3.645

3.647

3.640

---

3.631

3.626

IJ-3SS

PIN

LENGTH

(IN.)

1.618

---

1.869

2.058

2.242

2.803

2.803

2.794

2.794

2.758

3.053

3.046

3.041

3.035

3.030

3.030

3.427

3.424

3.410

3.404

3.398

3.552

3.544

---

3.675

---

3.670

5.150

3.661

---

I.D.

(IN.)

.985

.849

1.301

1.531

1.700

1.945

1.850

1.805

1.795

1.695

2.379

2.265

2.200

2.133

2.003

1.933

2.920

2.878

2.687

2.470

2.391

3.401

3.275

2.705

3.883

3.845

3.765

3.679

3.565

3.425

O.D.

(IN.)

1.562

1.600

1.893

2.123

2.340

2.710

2.710

2.910

2.910

3.135

3.230

3.385

3.510

3.635

3.760

3.760

3.875

3.947

4.260

4.385

4.525

4.385

4.572

4.885

4.940

4.940

5.060

---

5.260

5.375

NL ATLAS BRADFORD TUBINGDSS-HTC & I-3SS

DSS-HTC CONNECTIONS INTERCHANGE WITH IJ-3SS; HOWEVER MIXED CONNECTIONS CAN RENDER THE METAL-TO-METAL SEAL INEFFECTIVE. 1-1/8” TAPER PER FOOT.8 THREADS PER INCH FOR SIZES 1” THROUGH 2-3/8”.6 THREADS PER INCH FOR SIZES 2-7/8” THROUGH 4-1/2”.

TADLOCK PIPE

4-16

PERFORMANCE PROPERTIES

J-55

PSI

10,000

12,940

8,500

7,750

7,690

8,100

9,170

10,510

10,760

13,360

7,680

9,550

10,530

11,470

13,310

14,260

7,400

8,330

10,530

12,930

13,690

6,590

8,330

---

5,720

6,420

7,620

---

9,510

10,860

P-105

400

400

600

800

1000

1500

1700

1900

2100

2400

2200

3000

3500

4000

4400

5000

3000

3500

4000

5000

5500

3200

4000

5000

3500

4000

4500

5000

5500

6000

N-80

(FT.-LBS)

300

300

500

600

800

1300

1500

1700

1900

2200

1800

2600

3000

3500

4000

4500

2600

3000

3500

4500

5000

2800

3600

4500

3000

3500

4000

4500

5000

5500

J-55

200

200

400

500

600

1100

1300

1500

1700

2000

1600

2200

2600

3000

3600

4000

2200

2600

3000

4000

4500

2400

3200

4000

2500

3000

3500

4000

4500

5000

P-105

LBS

51,860

67,080

70,200

83,940

98,110

136,940

155,110

177,710

182,000

226,000

190,260

236,620

260,810

284,310

330,000

353,420

271,970

306,110

386,570

474,820

503,020

323,060

399,500

682,130

378,050

402,740

462,780

507,790

577,300

659,740

N-80

LBS

39,510

51,110

53,480

63,960

74,750

104,340

118,180

135,400

138,670

172,180

144,960

180,280

198,710

216,620

251,400

269,270

207,220

233,230

294,530

361,770

383,250

246,140

304,380

519,720

288,040

306,850

352,600

386,890

439,850

502,660

J-55

LBS

27,160

35,140

36,770

43,970

51,390

71,730

81,250

93,090

95,340

118,400

99,660

123,940

136,610

148,900

172,800

185,130

142,460

160,340

202,490

248,710

263,480

169,220

209,260

357,310

198,030

211,000

242,410

265,980

302,400

345,580

P-105

PSI

18,580

25,010

15,500

14,020

13,890

14,700

16,870

19,650

20,200

26,010

13,870

17,650

19,690

21,730

25,890

28,120

13,340

15,180

19,690

24,990

26,770

12,040

15,160

28,020

11,070

11,840

13,760

15,230

17,560

20,420

N-80

PSI

14,160

19,060

11,800

10,680

10,5900

11,200

12,860

14,970

15,390

19,810

10,570

13,450

15,000

16,560

19,730

21,430

10,160

11,560

15,000

19,040

20,400

9,170

11,550

21,350

8,440

9,020

10,480

10,880

13,380

15,560

J-55

PSI

9,730

13,100

8,120

7,350

7,280

7,700

8,840

10,290

10,580

13,620

7,260

9,250

10,320

11,390

13,570

14,730

6,980

7,950

10,320

13,090

14,020

6,300

7,940

---

5,790

6,200

7,210

---

9,200

10,690

P-105

PSI

19,090

24,700

16,220

14,290

14,060

15,460

17,510

20,060

20,540

25,510

14,010

18,230

20,090

21,900

25,410

27,220

13,050

15,920

20,090

24,680

26,140

10,700

15,900

27,140

8,950

10,350

13,820

15,960

18,140

20,740

N-80

PSI

14,550

18,820

12,360

11,280

11,180

11,780

13,340

15,280

15,650

19,430

11,170

13,890

15,300

16,690

19,360

20,740

10,530

12,120

15,310

18,800

19,920

8,800

12,110

20,680

7,500

8,540

11,080

12,160

13,820

15,800

COLLAPSE PRESSURE BURST PRESSUREPIPE*

TENSILE YIELD STRENGTH*OPTIMUM MAKE-UP TORQUE

NL ATLAS BRADFORD TUBINGDSS-HTC & IJ-3SS

*JOINT EFFICIENCY MEETS OR EXCEEDS 100%.

TADLOCK PIPE

4-17

DIMENSIONAL DATA

API

SIZE-O.D.

(IN.)

2-3/8

2-7/8

3-1/2

4

4-1/2

WEIGHT

INTG.

T&C

(LB/FT)

4.70

5.30

5.95

6.20

7.70

6.50

7.90

8.70

9.50

11.00

11.65

9.30

10.30

12.95

15.80

16.70

11.00

13.40

22.80

12.75

13.50

15.50

16.90

19.20

21.60

DRIFT

DIAMETER

(IN.)

1.901

1.845

1.773

1.759

1.609

2.347

2.229

2.165

2.101

1.971

1.901

2.867

2.797

2.625

2.423

2.355

3.351

3.215

2.655

3.833

3.795

3.701

3.629

3.515

3.375

WALL

THICKNESS

(IN.)

.190

.218

.254

.261

.336

.217

.276

.308

.340

.405

.440

.254

.289

.375

.476

.510

.262

.330

.610

.271

.290

.337

.373

.430

.500

I.D.

(IN.)

1.995

1.939

1.867

1.853

1.703

2.441

2.323

2.259

2.195

2.065

1.995

2.992

2.992

2.750

2.548

2.480

3.476

3.340

2.780

3.958

3.920

3.826

3.754

3.640

3.500

UPSET

O.D.

(IN.)

2.468

2.468

2.468

2.468

2.468

2.999

2.999

2.999

2.999

2.999

2.999

3.629

3.629

3.629

3.629

3.629

4.134

4.134

4.134

4.637

4.637

4.637

4.637

4.637

4.637

PIN

LENGTH

(IN.)

2.300

2.300

2.300

2.300

2.300

2.700

2.700

2.700

2.700

2.700

2.700

3.125

3.125

3.125

3.125

3.125

3.200

3.200

3.200

3.200

3.200

3.200

3.200

3.200

3.200

O.D.

(IN.)

2.71

2.71

2.91

2.91

3.135

3.230

3.385

3.510

3.635

3.760

3.760

3.875

3.947

4.260

4.385

4.525

4.385

4.572

4.885

4.940

4.940

5.050

5.150

5.260

5.375

I.D.

(IN.)

1.930

1.875

1.805

1.791

1.641

2.379

2.261

2.187

2.133

2.003

1.933

2.917

2.847

2.675

2.470

2.391

3.401

3.265

2.705

3.883

3.845

3.751

3.679

3.565

3.425

CONNECTION

NL ATLAS BRAFORD TUBINGIJ-4S

THREADS CUT ON 1-1/8” TAPER PER FOOT.8 THREADS PER INCH FOR SIZE 2-3/86 THREADS PER INCH FOR SIZES 2-7/8 – 4-1/2.

TADLOCK PIPE

4-18

PERFORMANCE PROPERTIES

J-55

PSI

8,100

9,170

10,510

10,760

13,360

7,680

9,550

10,530

11,470

13,310

14,260

7,400

8,330

10,530

12,930

13,690

6,590

8,330

---

5,720

6,420

7,620

---

9,510

10,860

P-105

2,400

2,400

3,000

3,000

3,800

3,000

3,500

3,500

3,500

4,200

4,200

4,100

4,100

4,700

5,000

5,000

4,500

5,500

7,000

5,000

5,000

5,600

6,500

7,200

7,500

N-80

(FT.-LBS)

2,000

2,000

2,500

2,500

3,200

2,600

3,000

3,000

3,000

3,600

3,600

3,200

3,200

3,700

4,000

4,000

4,000

4,500

6,000

4,000

4,000

4,500

6,000

6,000

6,000

J-55

1,300

1,300

1,800

1,800

2,600

1,700

2,000

2,000

2,000

2,500

2,500

2,300

2,300

2,800

3,000

3,000

3,000

3,500

5,000

2,900

2,900

3,500

4,000

5,000

5,000

P-105

LBS

136,940

155,000

177,710

182,000

226,000

190,260

236,620

260,810

284,310

330,000

353,420

271,970

306,110

386,570

474,820

503,020

323,060

399,500

682,130

378,050

402,740

462,780

507,790

577,300

659,740

N-80

LBS

104,340

118,000

135,400

139,000

172,000

144,960

180,280

198,710

216,620

251,400

269,270

207,220

233,230

294,530

361,770

383,250

246,140

304,380

519,720

288,040

306,850

352,600

386,890

439,850

502,660

J-55

LBS

71,730

81,000

93,090

95,000

118,000

99,660

123,940

136,610

148,900

172,800

185,130

142,460

160,340

202,490

248,710

263,480

169,220

209,260

357,310

198,030

211,000

242,410

265,980

302,400

345,580

P-105

PSI

14,700

16,870

19,650

20,200

26,010

13,870

17,650

19,690

21,730

25,890

28,120

13,340

15,180

19,690

24,990

26,770

12,040

15,160

8,020

11,070

11,840

13,760

15,230

17,560

20,420

N-80

PSI

11,200

12,860

14,970

15,390

18,810

10,570

13,450

15,000

16,560

19,730

21,430

10,160

11,560

15,000

19,040

20,400

9,170

11,550

21,350

8,440

9,020

10,480

10,880

13,380

15,560

J-55

PSI

7,700

8,840

10,290

10,580

13,620

7,260

9,250

10,320

11,390

13,570

14,730

6,980

7,950

10,320

13,090

14,020

6,300

7,940

---

5,790

6,200

7,210

---

9,200

10,960

P-105

PSI

15,460

17,510

20,060

20,540

25,510

14,010

18,230

20,090

21,900

25,410

27,220

13,050

15,920

20,090

24,680

26,140

10,700

15,900

27,140

8,950

10,350

13,820

15,960

18,140

20,740

N-80

PSI

11,780

13,340

15,280

15,650

19,430

11,170

13,890

15,300

16,690

19,360

20,740

10,530

12,120

15,310

18,800

19,920

8,800

12,110

20,680

7,500

8,540

11,080

12,160

13,820

15,800

COLLAPSE PRESSURE BURST PRESSUREPIPE*

TENSILE YIELD STRENGTH*OPTIMUM MAKE-UP TORQUE

NL ATLAS BRADFORD TUBINGIJ-4S

*JOINT EFFICIENCY MEETS OR EXCEEDS 100%.

TADLOCK PIPE

4-19

DIMENSIONAL DATA

NL ATLAS BRADFORD TUBINGTC-4S

THREADS CUT ON 3/4” TAPER PER FOOT8 THREADS PER INCH FOR SIZES 2-3/8” – 3-1/2”6 THREADS PER INCH FOR SIZES 4” – 4-1/2”

CONNECTIONAPI

SIZE

O.D.

(IN.)

2-3/8

2-7/8

3-1/2

4

4-1/2

WEIGHT

T&C

LB/FT

4.7

5.3

5.95

6.2

7.7

6.5

7.9

8.7

9.5

11.0

11.65

9.3

10.3

12.95

15.80

16.70

11.0

13.4

12.75

13.5

15.5

16.9

19.2

21.6

I.D.

(IN.)

1.995

1.939

1.867

1.853

1.703

2.441

2.323

2.259

2.195

2.065

1.995

2.992

2.922

2.750

2.548

2.480

3.476

3.340

3.958

3.920

3.826

3.754

3.640

3.500

WALL

THICKNESS

(IN.)

.190

.218

.254

.261

.336

.217

.276

.308

.340

.405

.440

.254

.289

.375

.476

.510

.262

.330

.271

.290

.337

.373

.430

.500

DRIFT

DIAMETER

(IN.)

1.901

1.845

1.773

1.759

1.609

2.347

2.229

2.165

2.101

1.971

1.901

2.867

2.797

2.625

2.423

2.355

3.351

3.215

3.833

3.795

3.701

3.629

3.515

3.375

I.D.

(IN.)

1.995

1.939

1.867

1.853

1.703

2.441

2.323

2.259

2.195

2.065

1.995

2.992

2.922

2.750

2.548

2.480

3.476

3.340

3.958

3.920

3.826

3.754

3.640

3.500

O.D.

(IN.)

2.750

2.750

2.800

2.800

2.900

3.250

3.375

3.375

3.450

3.500

3.550

3.950

3.950

4.100

4.200

4.250

4.450

4.525

4.950

4.950

5.100

5.100

5.200

5.300

PIN

LENGTH

(IN.)

3.081

3.081

3.081

3.081

3.081

3.331

3.331

3.331

3.331

3.331

3.331

3.706

3.706

3.706

3.706

3.706

3.875

3.875

4.000

4.000

4.000

4.000

4.000

4.000

TADLOCK PIPE

4-20

PERFORMANCE PROPERTIES

J-55

PSI

8,100

9,170

10,510

10,760

13,360

7,680

9,550

10,530

11,470

13,310

14,260

7,400

8,330

10,530

12,930

13,690

6,590

8,330

5,720

6,420

7,620

8,360

9,510

10,860

P-105

2400

2400

3000

3000

3800

3000

3500

3500

3500

4200

4200

4100

4200

4700

5000

5000

4500

5500

5000

5000

5600

6500

7200

7500

N-80

(FT.-LBS)

2000

2000

2500

2500

3200

2600

3000

3000

3000

3600

3600

3200

3200

3700

4000

4000

4000

4500

4000

4000

4500

6000

6000

6000

J-55

1300

1300

1800

1800

2600

1700

2000

2000

2000

2500

2500

2300

2300

2800

3000

3000

3000

3500

2900

2900

3500

4000

5000

5000

P-105

LBS

136,940

155,110

177,710

182,000

226,000

190,260

236,620

260,810

284,310

330,000

353,420

271,970

306,110

386,570

474,820

503,020

323,060

399,500

378,050

402,740

462,780

507,780

577,300

659,740

N-80

LBS

104,340

118,180

135,400

138,670

172,120

144,960

180,280

198,710

216,620

251,400

269,270

207,220

233,230

294,530

361,770

383,250

246,140

304,380

288,040

306,850

352,600

386,880

439,850

502,660

J-55

LBS

71,730

81,250

93,090

95,340

118,400

99,660

123,940

136,610

148,900

172,800

185,130

142,460

160,340

202,490

248,710

263,480

169,220

209,260

198,030

211,000

242,410

265,980

302,400

345,580

P-105

PSI

14,700

16,870

19,650

20,200

26,010

13,870

17,650

19,690

21,730

25,890

28,120

13,340

15,180

19,690

24,990

26,700

12,040

15,160

11,070

11,840

13,760

15,230

17,560

20,420

N-80

PSI

11,200

12,860

14,970

15,390

19,810

10,570

13,450

15,000

16,560

19,730

21,430

10,160

11,560

15,000

19,040

20,400

9,170

11,550

8,440

9,020

10,480

11,600

13,380

15,560

J-55

PSI

7,700

8,840

10,290

10,580

13,620

7,260

9,250

10,320

11,390

13,570

14,730

6,980

7,950

10,320

13,090

14,020

6,300

7,940

5,790

6,200

7,210

7,980

9,200

10,690

P-105

PSI

15,460

17,510

20,060

20,540

25,510

14,010

18,230

20,090

21,900

25,410

27,220

13,050

15,920

20,090

24,680

26,140

10,700

15,900

8,950

10,350

13,820

15,960

18,140

20,740

N-80

PSI

11,780

13,340

15,280

15,650

19,430

11,170

13,890

15,300

16,690

19,360

20,740

10,530

12,120

15,310

18,800

19,920

8,800

12,110

7,500

8,540

11,080

12,160

13,820

15,800

COLLAPSE PRESSURE BURST PRESSUREPIPE*

TENSILE YIELD STRENGTHOPTIMUM MAKE-UP TORQUE

NL ATLAS BRADFORD TUBINGTC-4S

*JOINT EFFICIENCY MEETS OR EXCEEDS 100%.

TADLOCK PIPE

4-21

DIMENSIONAL DATA

NL ATLAS BRADFORD TUBINGFL-4S

1-1/8” TAPER PER FOOT.6 THREADS PER INCH.

CONNECTIONAPI

SIZE

O.D.

(IN.)

2-3/8

2-7/8

3-1/2

4

4-1/2

WEIGHT

LB/FT

4.70

5.95

6.65

6.50

7.90

8.70

10.40

7.70

9.30

10.30

12.95

13.30

15.50

9.50

11.00

11.60

14.00

9.50

10.50

11.60

12.60

13.50

15.10

16.90

18.80

21.60

I.D.

(IN.)

1.995

1.887

1.815

2.441

2.323

2.259

2.151

3.068

2.992

2.922

2.750

2.764

2.602

3.548

3.476

3.428

3.340

4.090

4.052

4.000

3.958

3.920

3.826

3.754

3.640

3.500

WALL

THICKNESS

(IN.)

.190

.254

2.80

.217

.276

.308

.362

.216

.254

2.89

.375

.368

.449

.226

.262

.286

.330

.205

.224

.250

.271

.290

.337

.373

.430

.500

DRIFT

DIAMETER

(IN.)

1.901

1.773

1.721

2.347

2.229

2.165

2.057

2.943

2.867

2.797

2.625

2.639

2.477

3.423

3.351

3.303

3.215

3.965

3.927

3.875

3.833

3.795

3.701

3.629

3.515

3.375

I.D.

(IN.)

1.926

1.823

1.771

2.372

2.279

2.215

2.107

2.968

2.917

2.847

2.675

2.689

2.527

3.448

3.401

3.353

3.265

3.990

3.952

3.952

3.883

3.845

3.751

3.679

3.565

3.425

PIN

LENGTH

(IN.)

1.523

2.050

2.099

1.473

2.099

2.161

3.841

1.635

2.048

2.132

3.847

3.910

4.348

1.680

2.068

2.118

2.211

1.588

1.672

2.111

2.048

2.128

2.221

3.889

4.248

4.679

TADLOCK PIPE

4-22

PERFORMANCE PROPERTIES

J-55

PSI

8,100

10,510

11,440

7,680

9,550

10,530

12,110

5,970

7,400

8,330

10,530

10,350

12,300

5,110

6,590

7,300

8,330

3,310

4,010

4,960

5,720

6,420

7,620

---

9,510

10,860

P-105

500

500

600

800

800

800

900

1600

1600

1600

1700

1700

1700

2300

2500

2500

2700

---

---

3200

3200

3500

3500

3700

3700

3700

N-80

(FT.-LBS)

500

500

600

800

800

900

900

1600

1600

1600

1700

1700

1700

2300

2500

2500

2700

---

---

3200

3200

3500

3500

3700

3700

3700

J-55

400

400

500

600

600

700

700

1400

1400

1400

1500

1500

1500

2000

2200

2200

2400

2500

2500

2700

2700

3000

3000

3200

3200

3200

P-105

LBS

62,000

62,000

106,000

86,000

130,000

143,000

195,000

105,000

149,000

168,000

251,000

247,000

294,000

126,000

178,000

193,000

220,000

---

---

193,000

208,000

221,000

236,000

330,000

375,000

428,000

N-80

LBS

47,000

74,000

81,000

65,000

99,000

109,000

149,000

80,000

114,000

128,000

191,000

189,000

224,000

96,000

135,000

146,000

167,000

---

---

147,000

158,000

168,000

194,000

252,000

285,000

326,000

J-55

LBS

32,000

51,000

56,000

45,000

68,000

75,000

102,000

55,000

78,000

88,000

131,000

129,000

154,000

66,000

93,000

101,000

115,000

68,000

74,000

101,000

109,000

116,000

133,000

---

196,000

224,000

P-105

PSI

14,700

19,650

21,660

13,870

17,650

19,690

23,140

11,340

13,340

15,180

19,690

19,320

23,610

10,380

12,040

13,140

15,160

---

---

10,690

11,070

11,840

13,760

15,230

17,560

20,420

N-80

PSI

11,200

14,970

16,500

10,570

13,450

15,000

17,630

8,640

10,160

11,560

15,000

14,730

17,990

7,910

9,170

10,010

11,550

---

---

7,780

8,440

9,020

10,480

11,600

13,380

15,560

J-55

PSI

7,700

10,290

11,350

7,260

9,250

10,320

12,120

5,940

6,980

7,950

10,320

10,120

12,370

5,440

6,300

6,880

7,940

4,380

4,790

5,350

5,790

6,200

7,210

---

9,200

10,690

P-105

PSI

15,460

20,060

21,840

14,010

18,230

20,090

23,110

9,440

13,050

15,920

20,090

19,760

23,480

7,720

10,700

12,690

15,900

---

---

7,560

8,950

10,350

13,820

15,960

18,150

20,740

N-80

PSI

11,780

15,280

16,640

11,170

13,890

15,300

17,610

7,870

10,530

12,120

15,310

15,060

17,890

6,590

8,800

10,270

12,110

---

---

6,350

7,500

8,540

11,090

12,160

13,830

15,800

COLLAPSE PRESSURE BURST PRESSURE JOINT YIELD STRENGTH OPTIMUM MAKE-UP TORQUE

NL ATLAS BRADFORD TUBINGFL-43

TADLOCK PIPE

4-23

DIMENSIONAL DATA

QUANEX TUBING JOINTSDWS & DW

*DW CONNECTIONS ARE AVAILABLE ONLY IN THESE WEIGHTS3/4” TAPER PER FOOT.8 THREADS PER INCH (MODIFIED ACME THREADS)

CONNECTIONAPI

SIZE

O.D.

(IN.)

1 (1.315)

1 (1.315)

1-1/4 (1.660)

1-1/4 (1.660)

1-1/2 (1.900)

1-1/2 (1.900)

2-1/16

2-1/16

2-3/8

2-7/8

3-1/2

4

4-1/2

WEIGHT

T&C

LB/FT

1.80*

2.25

2.40*

3.02

2.90*

3.64

3.25*

4.50

4.70

5.30

5.95

7.70

6.50

7.90

8.70

9.50

11.00

9.30

10.30

12.95

11.00

13.40

12.75

13.50

15.50

I.D.

(IN.)

1.049

.957

1.380

1.278

1.610

1.500

1.751

1.163

1.995

1.939

1.867

1.703

2.441

2.323

2.259

2.195

2.065

2.992

2.922

2.750

3.476

3.340

3.958

3.920

3.826

WALL

THICKNESS

(IN.)

.133

.179

.140

.191

.145

.200

.156

.225

.190

.218

.254

.336

.217

.276

.308

.340

.405

.254

.289

.375

.262

.330

.271

.290

.337

DRIFT

DIAMETER

(IN.)

.955

.848

1.286

1.184

1.516

1.406

1.657

1.519

1.901

1.845

1.773

1.609

2.347

2.229

2.165

2.101

1.971

2.867

2.797

2.625

3.351

3.215

3.833

3.795

3.701

I.D.

(IN.)

.970

.864

1.300

1.200

1.530

1.420

1.700

1.545

1.945

1.890

1.805

1.635

2.375

2.255

2.190

2.126

1.996

2.920

2.840

2.665

3.395

3.260

3.865

3.835

3.740

O.D.

(IN.)

1.552

1.654

1.883

1.974

2.113

2.202

2.330

2.460

2.700

2.740

2.900

3.125

3.220

3.400

3.500

3.625

3.750

3.905

3.955

4.250

4.405

4.560

4.910

4.935

5.060

PIN

LENGTH

(IN.)

1.750

1.750

2.125

2.125

2.375

2.375

2.500

2.500

2.625

2.625

2.625

2.625

2.750

2.750

2.750

2.750

2.750

3.000

3.000

3.000

3.250

3.250

3.250

3.250

3.250

TADLOCK PIPE

4-24

PERFORMANCE PROPERTIES

J-55

PSI

10,000

12,940

8,500

11,200

7,750

10,360

7,690

10,690

8,100

9,170

10,510

13,360

7,680

9,550

10,530

11,470

13,310

7,400

8,330

10,530

6,590

8,330

5,720

6,420

7,620

P-105

400

400

600

700

800

900

1000

1000

1500

1700

1900

2400

2200

3000

3500

4000

4400

3000

3500

4000

3200

4000

3500

4000

4500

N-80

(FT.-LBS)

300

300

500

600

600

800

800

900

1300

1500

1700

2200

1800

2600

3000

3500

4000

2600

3000

3500

2800

3600

3000

3500

4000

J-55

200

200

400

400

500

600

600

700

1100

1300

1500

2000

1600

2200

2600

3000

3600

2200

2600

3000

2400

3200

2500

3000

3500

P-105

LBS

51,860

67,080

70,200

92,550

83,940

112,160

98,110

136,420

136,940

155,110

177,710

226,000

190,260

236,620

260,810

284,310

330,000

271,970

306,110

386,570

323,060

399,500

378,050

402,740

462,780

N-80

LBS

39,510

51,110

53,480

70,520

63,960

85,450

74,750

103,940

104,340

118,180

135,400

172,180

144,960

180,280

198,710

216,620

251,400

207,220

233,230

294,530

246,140

304,380

288,040

306,850

352,600

J-55

LBS

27,160

35,140

36,770

48,480

43,970

58,750

51,390

71,460

71,730

81,250

93,090

118,400

99,660

123,940

136,610

148,900

172,800

142,460

160,340

202,490

169,220

209,260

198,030

211,000

242,410

P-105

PSI

18,580

25,010

15,500

21,140

14,020

19,340

13,890

20,040

14,700

16,870

19,650

26,010

13,870

17,650

19,690

21,730

25,890

13,340

15,180

19,690

12,040

15,160

11,070

11,840

13,760

N-80

PSI

14,160

19,060

11,800

16,110

10,680

14,740

10,590

15,270

11,200

12,860

14,970

19,810

10,570

13,450

15,000

16,560

19,730

10,160

11,560

15,000

9,170

11,550

8,440

9,020

10,480

J-55

PSI

9,730

13,100

8,120

11,070

7,350

10,130

7,280

10,500

7,700

8,840

10,290

13,620

7,260

9,250

10,320

11,390

13,570

6,980

7,950

10,320

6,300

7,940

5,790

6,200

7,210

P-105

PSI

19,090

24,700

16,220

21,380

14,290

19,780

14,060

20,410

15,460

17,510

20,060

25,510

14,010

18,230

20,090

21,900

25,410

13,050

15,920

20,090

10,700

15,900

8,950

10,350

13,820

N-80

PSI

14,550

18,820

12,360

16,290

11,280

15,070

11,180

15,550

11,780

13,340

15,280

19,430

11,170

13,890

15,300

16,690

19,360

10,530

12,120

15,310

8,800

12,110

7,500

8,540

11,080

COLLAPSE PRESSURE BURST PRESSUREPIPE*

TENSILE YIELD STRENGTHOPTIMUM MAKE-UP TORQUE

QUANEX TUBING JOINTSDWS & DW

*JOINT EFFICIENCY MEETS OR EXCEEDS 100%.

TADLOCK PIPE

4-25

DIMENSIONAL DATA

CONNECTION

O.D.

SPEC

(IN.)

2.655

2.700

---

---

---

3.166

---

---

---

---

3.859

3.914

---

---

REG.

(IN.)

2.705

2.750

2.906

2.937

3.125

3.220

3.437

3.500

3.625

3.687

3.915

3.980

4.313

4.500

I.D.

(IN.)

1.940

1.885

1.805

1.795

1.645

2.370

2.265

2.200

2.130

2.030

2.920

2.870

2.687

2.485

PIN

LENGTH

(IN.)

2.272

2.260

2.978

2.969

2.936

2.338

2.951

2.942

2.918

2.918

2.788

2.786

3.236

3.226

API

SIZE-O.D.

(IN.)

2-3/8

2-7/8

3-1/2

WEIGHT

INT. T&C

(LB/FT)

4.70*

5.30*

5.95

6.20

7.70

6.50*

7.90

8.70

9.50

10.70

9.30*

10.30*

12.95

15.80

DRIFT

DIAMETER

(IN.)

1.901

1.845

1.773

1.759

1.609

2.347

2.229

2.165

2.101

1.997

2.864

2.797

2.625

2.423

WALL

THICKNESS

(IN.)

.190

.218

.254

.261

.336

.217

.276

.308

.340

.392

.254

.289

.375

.476

I.D.

(IN.)

1.995

1.939

1.867

1.853

1.703

2.441

2.323

2.259

2.195

2.091

2.992

2.992

2.750

2.548

REED “RTS” TUBING

*8 THREADS PER INCH, OTHER WEIGHTS ARE 6 THREADS PER INCH.

TADLOCK PIPE

4-26

PERFORMANCE PROPERTIES*

J-55

PSI

8,100

9,170

10,510

10,760

13,360

7,680

9,550

10,530

11,470

12,960

7,400

8,330

10,530

12,930

P-105

1,550

1,550

2,700

2,700

2,700

2,150

3,600

3,600

5,650

5,650

3,050

3,050

7,150

7,150

N-80

(FT.-LBS)

1,550

1,550

2,250

2,250

2,250

2,150

3,050

3,050

4,600

4,600

3,050

3,050

5,650

5,650

J-55

1,100

1,100

1,650

1,650

1,650

1,525

1,525

2,250

3,300

3,300

2,550

2,550

4,150

4,150

P-105

LBS

136,940

155,110

177,710

182,000

226,000

190,260

236,620

260,810

284,310

321,000

271,970

306,110

386,570

474,820

N-80

LBS

104,340

118,180

135,400

139,670

172,120

144,960

180,280

198,710

216,620

244,600

207,220

233,230

294,530

361,770

J-55

LBS

71,730

81,250

93,090

95,340

118,400

99,660

123,940

136,610

148,900

168,100

142,460

160,340

202,490

248,710

P-105

PSI

14,700

16,870

19,650

20,200

26,010

13,870

17,650

19,690

21,730

25,050

13,340

15,180

19,690

24,990

N-80

PSI

11,200

12,860

14,970

15,390

19,810

10,570

13,450

15,000

16,560

19,090

10,160

11,560

15,000

19,040

J-55

PSI

7,700

8,840

10,290

10,580

13,620

7,260

9,250

10,320

11,390

13,120

6,980

7,950

10,320

13,090

P-105

PSI

15,460

17,510

20,060

20,540

25,510

14,010

18,230

20,090

21,900

24,740

13,050

15,920

20,090

24,680

N-80

PSI

11,780

13,340

15,280

15,650

19,430

11,170

13,890

15,300

16,690

18,850

10,530

12,120

15,310

18,800

COLLAPSE PRESSURE BURST PRESSUREPIPE

TENSILE YIELD STRENGTHOPTIMUM MAKE-UP TORQUE

REED “RTS” TUBING

*JOINT EFFICIENCY 100% OR BETTER.

TADLOCK PIPE

4-27

COUPLING

O.D.

LENGTH

(IN.)

4.921

5.551

6.496

7.047

7.835

SP.CL

(IN.)

2.618

2.618

2.697

3.150

3.264

3.264

3.327

---

3.795

3.854

3.957

4.028

4.028

---

4.315

4.358

4.461

---

4.803

REG.

(IN.)

2.697

2.697

2.776

3.197

3.327

3.327

---

3.803

3.862

3.917

4.035

4.138

4.138

4.327

4.366

4.469

4.606

4.606

4.862

API

SIZE

O.D.

(IN.)

2-3/8

2-7/8

3-1/2

4

4-1/2

WEIGHT

T&C

(LB/FT)

4.60

5.10

5.80

6.40

7.70

8.60

9.80

7.70

9.20

10.20

12.70

13.70

14.70

9.50

10.90

13.00

14.80

16.50

12.60

PIN

LENGTH

(IN.)

2.204

2.499

2.991

3.011

2.991

2.991

2.991

2.991

3.265

3.287

3.265

3.265

3.265

3.661

DRIFT

DIAMETER

(IN.)

1.901

1.845

1.773

2.347

2.229

2.165

2.057

2.943

2.867

2.797

2.625

2.549

2.475

3.423

3.351

3.215

3.115

3.015

3.833

WALL

THICKNESS

(IN.)

.190

.218

.254

.217

.276

.308

.362

.216

.254

2.89

.375

.413

.450

.226

.262

.330

.380

.430

.271

I.D.

(IN.)

1.995

1.939

1.867

2.441

2.323

2.259

2.151

3.068

2.992

2.922

2.750

2.674

2.600

3.548

3.476

3.340

3.240

3.140

3.958

VALLOUREC VAM TUBING

DIMENSIONAL DATA

8 THREADS PER INCH FOR SIZES 2-3/8” THROUGH 2-7/8”.6 THREADS PER INCH FOR SIZES 3-1/2” THROUGH 4-1/2”.3/4” TAPER PER FOOT.

API

SIZE-O.D.

(IN.)

3/4

(1.050)

1

(1.315)

1-1/4

500

(1.660)

1-1/2

600

(1.900)

WEIGHT

INTG.

T&C

(LB/FT)

1.16

1.50

1.72

2.20

2.33

3.05

2.76

4.10

DRIFT

DIAMETER

(IN.)

.730

.648

.955

.848

1.286

1.183

1.516

1.406

WALL

THICKNESS

(IN.)

.113

.154

.133

.179

.140

.191

.145

.200

I.D.

(IN.)

.824

.742

1.049

.957

1.380

1.278

1.610

1.500

UPSET

O.D.

(IN.)

1.142

1.220

1.378

1.457

1.713

1.791

1.929

2.008

PIN

LENGTH

(IN.)

1.850

1.850

2.087

2.087

2.205

2.205

2.283

2.283

O.D.

(IN.)

1.299

1.339

1.555

1.614

1.913

1.976

2.142

2.220

I.D.

(IN.)

.807

.728

1.004

.906

1.307

1.205

1.535

1.429

CONNECTION

VALLOUREC MINI VAM

6 THREADS PER INCH.

TADLOCK PIPE

4-28

PERFORMANCE PROPERTIES

K-55

PSI

8100

9170

10510

7680

9550

10520

12110

5970

7400

8330

10520

11450

12320

5110

6590

8330

9460

10550

5720

P-105

2200

2200

2300

2700

3100

3300

---

3800

4700

4900

5800

6100

6100

3600

4000

5100

6500

8000

5400

N-80

(FT.-LBS)

2000

2000

2200

2700

3100

3300

2700

3200

3600

4900

5800

6100

6100

3600

4000

5100

6500

8000

4700

K-55

1400

1600

1800

2400

2900

3100

---

2900

2900

4300

5100

5400

5400

2500

3300

4300

5800

7200

4700

P-105

LBS

137,000

152,000

178,000

190,000

237,000

261,000

261,000

234,000

272,000

306,000

385,000

421,000

453,000

281,000

323,000

398,000

454,000

501,000

377,000

N-80

LBS

104,000

115,000

135,000

145,000

180,000

199,000

199,000

178,000

207,000

233,000

293,000

320,000

345,000

214,000

246,000

304,000

346,000

382,000

287,000

K-55

LBS

72,000

79,000

93,000

100,000

124,000

137,000

137,000

123,000

142,000

160,000

201,000

220,000

237,000

147,000

169,000

209,000

238,000

262,000

197,000

P-105

PSI

14700

16870

19650

13870

17640

19690

23140

11340

13330

15170

19690

21680

23620

10380

12040

15160

17460

19750

11070

N-80

PSI

11200

12850

14970

10570

13440

15000

17630

8640

10160

11560

15000

16520

18000

7910

9170

11550

13300

15050

8430

K-55

PSI

7700

8840

10290

7260

9240

10310

12120

5940

6980

7950

10310

11360

12370

5440

6300

7940

9140

10350

5800

P-105

PSI

15460

17510

20060

14010

18220

20090

23110

9440

13050

15910

20090

21860

23530

7710

10700

15900

18050

20150

8950

N-80

PSI

11780

13340

15280

11170

13890

15300

17610

7870

10530

12120

15310

16650

17930

6590

8800

12110

13760

15350

7500

COLLAPSE PRESSURE BURST PRESSURE JOINT YIELD STRENGTH OPTIMUM MAKE-UP TORQUE

VALLOUREC VAM TUBING

*JOINT EFFICIENCY 100% OR MORE.

J-55

PSI

10,560

13,770

10,000

12,940

11,200

10,360

P-105

200

200

300

300

500

500

600

600

N-80

(FT.-LBS)

200

200

300

300

350

500

450

600

J-55

150

150

200

200

70,200

350

83,940

450

P-105

LBS

34,920

45,510

51,860

67,080

53,480

92,550

63,960

112,150

N-80

LBS

26,610

34,680

39,510

51,110

36,770

70,500

43,970

85,450

J-55

LBS

18,290

23,840

27,610

35,140

15,500

48,480

14,020

58,750

P-105

PSI

19,780

26,950

18,580

25,010

11,800

21,140

10,680

19,340

N-80

PSI

15,070

20,530

14,160

19,060

8,120

16,110

7,350

14,740

J-55

PSI

10,360

14,120

9,730

13,100

16,220

11,070

14,290

10,130

P-105

PSI

20,170

26,280

19,090

24,700

12,360

21,380

11,280

19,780

N-80

PSI

15,370

20,020

14,550

18,820

8,500

16,290

7,750

15,070

COLLAPSE PRESSURE BURST PRESSUREPIPE*

TENSILE YIELD STRENGTHOPTIMUM MAKE-UP TORQUE

VALLOUREC VAM TUBING

TADLOCK PIPE

4-29

DIMENSIONAL DATA

USS IMPROVED BUTTRESS

THREADS CUT WITH 3/4” TAPER PER FOOT.8 THREADS PER INCH.

COUPLING

LENGTH

(IN.)

8-1/2

8-1/2

8-1/2

8-1/2

8-1/2

8-1/2

8-1/2

8-1/2

9

9-1/2

O.D.

(IN.)

2.875

2.875

3.500

3.500

3.500

4.250

4.250

4.250

4.750

5.200

API

SIZE

O.D.

(IN.)

2-3/8

2-7/8

3-1/2

4

4-1/2

WEIGHT

INTG.

T&C

(LB/FT)

4.60

5.80

6.40

7.90

8.60

9.20

10.20

14.90

10.90

12.60

I.D.

(IN.)

1.995

1.867

2.441

2.323

2.259

2.992

2.922

2.602

3.476

3.958

WALL

THICKNESS

(IN.)

.190

.254

.217

.276

.308

.254

.289

.449

.262

.271

DRIFT

DIAMETER

(IN.)

1.901

1.773

2.347

2.229

2.165

2.867

2.797

2.477

3.351

3.833

PIN

LENGTH

(IN.)

3-5/8

3-5/8

3-5/8

3-5/8

3-5/8

3-5/8

3-5/8

3-5/8

3-7/8

4-1/8

COUPLINGAPI

SIZE

O.D.

(IN.)

1-1/2

(1.990)

2

2-3/8

2-7/8

3-1/2

4

4-1/2

WEIGHT

INTG.

T&C

(LB/FT)

3.10

3.40

4.60

6.40

9.20

10.90

12.60

PIN

LENGTH

(IN.)

3-1/4

3-1/4

3-5/8

3-5/8

3-5/8

3-7/8

4-1/8

DRIFT

DIAMETER

(IN.)

1.476

1.576

1.901

2.347

2.867

3.351

3.833

WALL

THICKNESS

(IN.)

.165

.165

.190

.217

.254

.262

.271

I.D.

(IN.)

1.570

1.670

1.995

2.441

2.992

3.476

3.958

WHEELINGPITTSBURGH SEAMLESS 8 ACME

LENGTH

(IN.)

7-3/4

7-3/4

8-1/2

8-1/2

8-1/2

9

9-1/2

SP.CL.

(IN.)

2.20

2.30

2.700

3.220

3.865

4.400

4.920

O.D.

(IN.)

2.40

2.50

2.875

3.500

4.250

4.750

5.200

TADLOCK PIPE

4-30

PERFORMANCE PROPERTIES

USS IMPROVED BUTTRESS

*JOINT EFFICIENCY 100% OR MORE.THE IMPROVED USS BUTTRESS THREAD TUBING KNURLED MAKE-UP MARK IS CONSTRUCTED AND POSITIONED SO THAT IT PROVIDES A GUIDE TO ESTABLISHING RIG-DETERMINED TORQUE.

J-55

PSI

8,100

10,510

7,680

9,550

10,520

7,400

8,330

12,300

6,590

5,720

P-105

LBS

136,940

177,710

190,260

236,620

260,810

271,970

306,110

451,890

323,050

378,050

N-80

LBS

104,340

135,400

144,960

180,280

198,710

207,220

233,220

344,300

246,140

288,040

J-55

LBS

71,730

93,090

99,660

123,940

136,610

142,460

160,340

236,700

169,220

198,030

P-105

PSI

14,700

19,650

13,870

17,640

19,690

13,330

15,170

23,570

12,040

11,070

N-80

PSI

11,200

14,970

10,570

13,440

15,000

10,160

11,560

17,960

9,170

8,430

J-55

PSI

7,700

10,290

7,260

9,240

10,310

6,980

7,950

12,350

6,300

5,800

P-105

PSI

15,460

20,060

14,010

18,220

20,090

13,050

15,910

23,480

10,700

8,950

N-80

PSI

11,780

15,280

11,160

13,890

15,300

10,530

12,120

17,890

8,800

7,500

COLLAPSE PRESSURE BURST PRESSUREPIPE

TENSILE YIELD STRENGTH*

WHEELINGPITTSBURGH SEAMLESS 8 ACME

J-55

PSI

8,710

8,320

8,100

7,680

7,400

6,590

5,720

P-105

LBS

---

99,860

136,940

190,260

271,970

323,050

378,050

N-80

LBS

71,920

76,080

104,340

144,960

207,220

246,140

288,040

J-55

LBS

49,450

52,320

71,730

99,660

142,460

169,220

198,030

P-105

PSI

---

15,160

14,700

13,870

13,330

12,040

11,070

N-80

PSI

12,160

11,550

11,200

10,570

10,160

9,170

8,430

J-55

PSI

8,360

7,940

7,700

7,260

6,980

6,300

5,800

P-105

PSI

---

15,890

15,460

14,010

13,050

10,700

8,950

N-80

PSI

12,570

12,110

11,780

11,160

10,530

8,800

7,500

COLLAPSE PRESSURE BURST PRESSUREPIPE

TENSILE YIELD STRENGTH*

TADLOCK PIPE

4-31

DIMENSIONAL DATA

NOM.

SIZE

1/8

1/4

3/8

1/2

3/4

1

1-1/4

1-1/2

2

2-1/2

3

3-1/2

4

5

6

8

10

12

O.D.

(IN.)

.405

.540

.675

.840

1.050

1.315

1.660

1.900

2.375

2.875

3.500

4.000

4.500

5.563

6.625

8.625

10.750

12.750

I.D.

(IN.)

.269

.364

.493

.622

.824

1.049

1.380

1.610

2.067

2.469

3.068

3.548

4.026

WALL

THICK.

(IN.)

.068

.088

.091

.109

.113

.133

.140

.145

.154

.203

.216

.226

.237

WT./FT.

PLAIN

.24

.42

.57

.85

1.13

1.68

2.27

2.72

3.65

5.79

7.58

9.11

10.79

GRADE A

TEST

PRESSURE

700

700

700

700

700

700

1200

1200

2330

2500

2220

2030

1900

I.D.

(IN.)

.215

.302

.423

.546

.742

.957

1.278

1.500

1.939

2.323

2.900

3.364

3.826

4.813

5.761

7.625

9.750

11.750

WALL

THICK.

(IN.)

.095

.119

.126

.147

.154

.179

.191

.200

.218

.276

.300

.318

.337

.375

.432

.500

.500

.500

WT./FT.

PLAIN

.31

.54

.74

1.09

1.47

2.17

3.00

3.63

5.02

7.66

10.25

12.51

14.98

20.78

28.57

43.39

54.74

65.42

GRADE A

TEST

PRESSURE

850

850

850

850

850

850

1800

1800

2500

2500

2500

2800

2700

2430

2350

2090

1670

1410

I.D.

(IN.)

.252

.434

.599

.896

1.100

1.503

1.771

2.300

3.152

4.063

4.897

6.875

WALL

THICK.

(IN.)

.294

.308

.358

.382

.400

.436

.552

.600

.674

.750

.864

.875

WT./FT.

PLAIN

1.71

2.44

3.66

5.21

6.41

9.03

13.70

18.58

27.54

38.55

53.16

72.42

GRADE A

TEST

PRESSURE

1000

1000

1000

2200

2200

2500

2500

2500

2800

2800

2800

2800

LINE PIPE - STANDARD WEIGHT, THREADED - DIMENSIONAL DATA

NOM. SIZE

1/8

1/4

3/8

1/2

3/4

1

1-1/4

1-1/2

2

2-1/2

3

3-1/2

4

5

6

8

8

10

10

10

12

12

14

16

18

20

COUPLING

DIAMETER

.563

.719

.875

1.063

1.313

1.576

2.054

2.200

2.875

3.375

4.000

4.625

5.200

6.296

7.390

9.625

9.625

11.750

11.750

11.750

14.000

14.000

15.000

17.000

19.000

21.000

O.D.

.405

.540

.675

.840

1.050

1.315

1.660

1.900

2.375

2.875

3.500

4.000

4.500

5.563

6.625

8.625

8.625

10.750

10.750

10.750

12.750

12.750

14.000

16.000

18.000

20.000

ID.

.269

.364

.493

.622

.824

1.049

1.380

1.610

2.067

2.469

3.068

3.548

4.026

5.047

6.065

7.981

8.071

10.020

10.192

10.136

12.000

12.090

13.250

15.250

17.250

19.250

PLAIN

.24

.42

.57

.85

1.13

1.68

2.27

2.72

3.65

5.79

7.58

9.11

10.79

14.62

18.97

28.55

24.70

40.48

31.20

34.24

49.56

43.77

54.57

62.58

70.59

78.60

THD. & CPL.

.25

.43

.57

.86

1.14

1.70

2.30

2.75

3.75

5.90

7.70

9.25

11.00

15.00

19.45

29.35

25.55

41.85

32.75

35.75

51.15

45.45

57.00

65.30

73.00

81.00

THREADS

PER IN.

27

18

18

14

14

11-1/2

11-1/2

11-1/2

11-1/2

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

TAPER

PER FOOT

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

MALE THD

LENGTH

.392

.595

.601

.782

.794

.985

1.009

1.025

1.058

1.571

1.634

1.684

1.734

1.840

1.946

2.146

2.146

2.359

2.359

2.359

2.559

2.559

2.684

2.884

3.084

3.284

COUPLING

LENGTH

1-1/16

1-5/8

1-5/8

2-1/8

2-1/8

2-5/8

2-3/4

2-3/4

2-7/8

4-1/8

4-1/4

4-3/8

4-1/2

4-5/8

4-7/8

5-1/4

5-1/4

5-3/4

5-3/4

5-3/4

6-1/8

6-1/8

6-3/8

6-3/4

7-1/8

7-5/8

WEIGHT PER FOOT

STANDARD STEEL PIPEDIMENSION AND STRENGTH DATA

STANDARD - WEIGHT EXTRA-STRONG DOUBLE-EXTRA-STRONG

TADLOCK PIPE

API CASING REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1API CASING (8-ROUND, BUTTRESS & X-LINE) DIMENSIONAL DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4API CASING (8-ROUND, BUTTRESS & X-LINE) PERFORMANCE PROPERTIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8NON-API & DISCONTINUED CASING (DIMENSIONAL DATA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11ARMCO SEAL-LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-15HYDRIL SUPER EU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17 FJ/FJ-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19 SUPER FJ/FJ-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-23 TRIPLESEAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-27NL ATLAS BRADFORD FL-4S QUADRASEAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-29 IJ-4S QUADRASEAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-31VALLOUREC VAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-33

CASING

TADLOCK PIPE

NOTES

TADLOCK PIPE

5-1

CASING SIZE

4.000 – 5.000

5.500 – 8.625

9.625 & LARGER

4.500 & LARGER

ALL

SIZES

DIMENSION

O.D. (D)*

WALL THICKNESS

I.D.

TOLERANCE

+7/64” – .75% O.D.

+1/8” – .75% O.D.

+5/32” – .75% O.D.

+.75% O.D. – .75% O.D.

–12.5%

GOVERNED BY O.D. TOLERANCES

TYPE

UPSET

NON-UPSET

---

---

TOTAL RANGE LENGTH INCL.

PERMISSIBLE VARIATION, MAX.

RANGE LENGTH FOR 95% OR MORE OF CARLOAD:

PERMISSIBLE LENGTH, MIN.

VALUES ABOVE FOR RANGE 2 & 3 CASING

APPLY ALSO TO LINERS

RANGE 1

(FT.)

16–25

6

18

RANGE 2

(FT.)

25–34

5

18

RANGE 3

(FT.)

34 OR MORE

6

36

H-40

J-55

K-55

C-75

L-80

N-80

C-95

USS-95

P-110

V-150

40,000

55,000

55,000

75,000

80,000

80,000

95,000

95,000

110,000

150,000

80,000

80,000

80,000

90,000

95,000

110,000

110,000

---

140,000

180,000

60,000

75,000

95,000

95,000

95,000

100,000

105,000

110,000

125,000

160,000

GRADE MIN. PSI MAX. PSI

TENSILE STRENGTH

MINIMUM PSI

YIELD STRENGTH

DRIFT TESTCASING SIZE

8-5/8” AND SMALLER

9-5/8” TO 13-7/8”

16” AND LARGER

DRIFT MANDREL LENGTH

6”

12”

12”

DRIFT MANDREL DIAMETER

I.D. MINUS 1/8”

I.D. MINUS 5/32”

I.D. MINUS 3/16”

TENSILE REQUIREMENTS

RANGE LENGTHS

TOLERANCES

API CASING REQUIREMENTS

* MEASUREMENTS MADE IMMEDIATELY BEHIND THE UPSET FOR A DISTANCE OF APPROXIMATELY 5 INCHES FOR SIZES 5-1/2” O.D. AND SMALLER, AND A DISTANCE AP-PROXIMATELY EQUAL TO THE O.D. FOR SIZES LARGER THAN 5-1/2”.

TADLOCK PIPE

5-2

TADLOCK PIPE

5-3

DIMENSIONAL DATA

CASING DATA

8 ROUND & BUTTRESS X-LINE

API CASING

O.D.

(IN.)

4-1/2

5

5-1/2

6-5/8

7

7-5/8

8-5/8

SHORT

(IN.)

2.000

2.675

2.625

2.500

2.750

2.750

2.875

2.875

2.875

3.125

3.125

3.125

2.375

3.125

3.125

3.125

3.250

3.250

3.000

3.375

3.375

3.375

LONG

(IN.)

3.000

3.000

3.000

3.375

3.375

3.375

3.375

3.375

3.500

3.500

3.500

3.500

3.875

3.875

3.875

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.125

4.125

4.125

4.125

4.125

4.125

4.500

4.500

4.500

4.500

4.500

WEIGHT

T&C

LBS/FT

9.50

10.50

11.60

13.50

15.10

11.50

13.00

15.00

18.00

21.40

24.10

14.00

15.50

17.00

20.00

23.00

20.00

24.00

28.00

32.00

17.00

20.00

23.00

26.00

29.00

32.00

35.00

38.00

24.00

26.40

29.70

33.70

39.00

42.80

47.10

24.00

28.00

32.00

36.00

40.00

44.00

49.00

I.D.

(IN.)

4.090

4.052

4.000

3.920

3.826

4.560

4.494

4.408

4.276

4.126

4.000

5.012

4.950

4.892

4.778

4.670

6.049

5.921

5.791

5.675

6.538

6.456

6.366

6.276

6.184

6.094

6.004

5.920

7.025

6.969

6.875

6.765

6.625

6.501

6.375

8.097

8.017

7.921

7.825

7.725

7.625

7.511

DRIFT

DIAMETER

(IN.)

3.965

3.927

3.875

3.795

3.701

4.435

4.369

4.283

4.151

4.001

3.875

4.887

4.625

4.767

4.653

4.545

5.924

5.796

5.668

5.550

6.413

6.331

6.241

6.151

6.059

5.969

5.879

5.795

6.900

6.844

6.750

6.640

6.500

6.376

6.250

7.972

7.892

7.796

7.700

7.600

7.500

7.386

O.D.

(IN.)

5.360

5.360

5.860

5.869

5.860

5.860

7.000

7.000

7.000

7.390

7.390

7.390

7.390

7.530

7.530

8.010

8.010

8.010

8.010

9.120

9.120

9.120

9.120

9.120

I.D.

(IN.)

4.198*

4.198

4.736*

4.701*

4.701

4.610

5.781*

5.731

5.615

6.171*

6.171

6.123

6.032

5.940

5.860

6.770*

6.770

6.705

6.565

7.725*

7.725

7.663

7.565

7.451

DRIFT

DIAMETER

(IN.)

4.151

4.151

4.653

4.653

4.653

4.545

5.750

5.666

5.550

6.151

6.151

6.059

5.969

5.879

5.795

6.750

6.750

6.640

6.500

7.700

7.700

7.600

7.500

7.386

BUTT

(IN.)

3.638

3.638

3.638

3.763

3.763

3.763

3.763

3.763

3.826

3.826

3.826

3.826

4.013

4.013

4.013

4.200

4.200

4.200

4.200

4.200

4.200

4.200

4.388

4.388

4.388

4.388

4.388

4.388

4.513

4.513

4.513

4.513

4.513

X-LINE

(IN.)

4.590

4.590

4.590

4.590

4.590

4.590

4.590

4.590

4.590

4.590

4.590

4.590

4.590

4.590

4.590

4.590

4.590

4.590

4.590

4.590

6.0625

6.0625

6.0625

6.0625

6.0625

O.D.

(IN.)

5.000

†4.897

5.563

†5.375

6.050

†5.875

7.390

†7.000

7.656

†7.375

8.500

†8.125

9.625

†9.125

BUTT.

(IN.)

8-7/8

9-1/8

9-1/4

9-5/8

10

10-3/8

10-5/8

SHORT

(IN.)

6-1/4

6-1/2

6-3/4

7-1/4

7-1/4

7-1/2

7-3/4

LONG

(IN.)

7

7-3/4

8

8-3/4

9

9-1/4

10

UPSET LENGTH8 ROUND

PIN LENGTH COUPLING

*JOINT WILL NOT PASS API DRIFT TEST.† SPECIAL CLEARANCE O.D.8-ROUND 8 THREADS PER INCH AND 3/4” TAPER PER FOOT FOR ALL SIZESBUTTRESS 5 THREADS PER INCH FOR ALL SIZES 3/4” TAPER PER FOOT FOR SIZES 4-1/2” THRU 13-3/8” CASING 1” TAPER PER FOOT FOR 16” THRU 20” CASING.X-LINE 6 THREADS PER INCH AND 1-1/2” TAPER PER GOOT FOR SIZES 5” THRU 7-5/8” CASING 5 THREADS PER INCH AND 1-1/4” TAPER PER FOOT FOR SIZES 8-5/8” THRUY 10-3/4” CASING.

TADLOCK PIPE

5-4

O.D.

(IN.)

9-5/8

10-3/4

11-3/4

13-3/8

16

18-5/8

20

WEIGHT

T&C

LBS/FT

32.30

36.00

40.00

43.50

47.00

53.50

32.75

40.50

45.50

51.00

55.50

60.70

65.70

42.00

47.00

54.00

60.00

48.00

54.50

61.00

68.00

72.00

65.00

75.00

84.00

87.50

94.00

106.50

133.00

I.D.

(IN.)

9.001

6.921

8.835

8.765

8.681

8.535

10.192

10.050

9.950

9.850

9.760

9.660

9.560

11.084

11.000

10.880

10.772

12.715

12.615

12.515

12.415

12.347

15.250

15.124

15.010

17.755

19.124

19.000

18.730

DRIFT

DIAMETER

(IN.)

8.845

8.765

8.679

8.599

8.525

8.379

10.036

9.894

9.794

9.694

9.604

9.504

9.404

10.928

10.844

10.724

10.616

12.559

12.459

12.359

12.259

12.191

15.062

14.936

14.822

17.567

18.938

18.812

18.542

O.D.

(IN.)

10.100

10.100

10.100

10.100

11.460

11.460

11.460

I.D.

(IN.)

8.665*

8.665

8.621

8.475

9.819

9.719

9.629

DRIFT

DIAMETER

(IN.)

8.599

8.599

8.525

8.379

9.794

9.694

9.604

SHORT

(IN.)

3.375

3.375

3.375

2.750

3.500

3.500

3.500

3.500

3.500

3.500

3.500

3.500

3.500

3.500

3.500

3.500

3.500

3.500

3.500

4.000

4.000

4.000

4.000

4.000

4.000

4.000

LONG

(IN.)

4.750

4.750

4.750

4.750

4.750

5.250

5.250

5.250

BUTT.

(IN.)

4.513

4.513

4.513

4.513

4.513

4.513

4.513

4.513

4.513

4.513

4.513

4.513

4.513

4.513

4.513

4.513

4.613

4.613

4.613

4.613

4.613

4.613

X-LINE

(IN.)

6.0625

6.0625

6.0625

6.0625

6.0625

6.0625

6.0625

O.D.

(IN.)

10.625

†10.125

11.750

†11.250

12.750

14.375

17.000

19.750

21.000

BUTT.

(IN.)

10-5/8

10-5/8

10-5/8

10-5/8

10-5/8

10-5/8

10-5/8

SHORT

(IN.)

7-3/4

8

8

8

9

9

9

LONG

(IN.)

10-1/2

---

---

---

---

---

11-1/2

CASING DATA

8 ROUND & BUTTRESS X-LINE

API CASING

UPSET LENGTH8 ROUND

PIN LENGTH COUPLING

*JOINT WILL NOT PASS API DRIFT TEST.† SPECIAL CLEARANCE O.D.8 ROUND: 8 THREADS PER INCH AND 3/4” TAPER PER FOOT FOR ALL SIZES.BUTTRESS: 5 THREADS PER INCH FOR ALL SIZES. 3/4” TAPER PER FOOT FOR SIZES 4-1/2” THROUGH 13-3/8” CASING. 1” TAPER PER FOOT FOR 16” THROUGH 20” CASING.X-LINE: 6 THREADS PER INCH AND 1-1/2” TAPER PER FOOT FOR SIZES 5” THROUGH 7-5/8” CASING. 5 THREADS PER INCH AND 1-1/4” TAPER PER FOOT FOR SIZES 8-5/8” THROUGH 1-3/4” CASING.

TADLOCK PIPE

5-5

PERFORMANCE PROPERTIES

SIZE

O.D.

(IN.)

4-1/2

5

5-1/2

WEIGHT

T&C

(LBS/FT)

9.50

10.50

11.60

13.50

15.10

11.50

13.00

15.00

18.00

14.00

15.50

17.00

20.00

23.00

GRADE

K-55

K-55

K-55

L-80

C-95

P-110

L-80

C-95

P-110

P-110

K-55

K-55

K-55

L-80

C-95

P-110

L-80

C-95

P-110

K-55

K-55

K-55

L-80

C-95

P-110

L-80

C-95

P-110

L-80

C-95

P-110

COLLAPSE

PRESSURE

(PSI)

3,310

4,010

4,960

6,350

7,010

7,560

8,540

9,650

10,670

14,320

3,060

4,140

5,550

7,250

8,090

8,830

10,490

12,010

13,450

3,120

4,040

4,910

6,280

6,930

7,460

8,830

10,000

11,080

11,160

12,920

14,520

ROUND

(PSI)

4,380

4,790

5,350

7,780

9,240

10,690

9,020

10,710

12,410

14,420

4,240

4,870

5,700

8,290

9,840

11,400

10,140

12,040

13,940

4,270

4,810

5,320

7,740

9,190

10,640

9,190

10,910

12,640

10,560

12,540

14,520

BUTT.

(PSI)

---

4,790

5,350

7,780

9,240

10,690

9,020

10,710

12,410

13,460

---

4,870

5,700

8,290

9,840

11,400

9,910

11,770

13,620

---

4,810

5,320

7,740

9,190

10,640

9,190

10,910

12,640

10,560

12,540

14,520

PIPE

YIELD

STRENGTH

(1000 LB)

152

166

184

267

317

367

307

364

422

485

182

208

241

350

416

481

422

501

580

222

248

273

397

471

546

466

554

641

530

630

729

X-LINE

---

2700

2700

SHORT

112

146

170

---

---

---

---

---

---

---

147

186

228

---

---

---

---

---

---

189

222

252

---

---

---

---

---

---

---

---

---

LONG

---

---

180

212

234

279

257

284

338

406

---

201

246

295

326

388

376

416

495

---

239

272

338

374

445

416

460

548

489

540

643

BUTT.

---

249

277

291

325

385

334

374

443

509

---

309

359

379

424

503

457

512

606

---

366

402

428

480

568

503

563

667

550

608

724

X-LINE

---

---

---

---

---

---

---

---

---

---

---

---

416

416

459

547

446

493

587

---

429

471

471

521

620

497

549

654

549

608

722

SHORT

1120

1460

1700

---

---

---

---

---

---

---

1470

1860

2280

---

---

---

---

---

---

1890

2220

2520

---

---

---

---

---

---

---

---

---

LONG

(FT-LBS)

---

---

1800

2230

2580

3020

2710

3130

3660

4400

---

2010

2460

3080

3560

4170

3950

4550

5310

---

2390

2720

3410

3960

4620

4200

4870

5690

4930

5720

6680

API CASING

RECOMMENDED MAKE-UP TORQUE FOR BUTTRESS CONNECTIONS IS THAT REQUIRED TO PLACE FACE OF COUPLING AT BASE OF THE TRIANGLE STAMP.

JOINT TENSILE

STRENGTH (1000 LB)OPTIMUM MAKE-UP TORQUEBURST PRESSURE

ROUND

TADLOCK PIPE

5-6

PERFORMANCE PROPERTIES

SIZE

O.D.

(IN.)

6-5/8

7

7-5/8

WEIGHT

T&C

(LBS/FT)

20.00

24.00

28.00

32.00

17.00

20.00

23.00

26.00

32.00

35.00

38.00

24.00

26.40

29.70

33.70

GRADE

K-55

K-55

L-80

C-95

P-110

L-80

C-95

P-110

L-80

C-95

P-110

H-40

K-55

K-55

L-80

C-95

K-55

L-80

C-95

L-80

C-95

P-110

L-80

C-95

P-110

L-80

C-95

P-110

L-80

C-95

P-110

H-40

K-55

L-80

C-95

L-80

C-95

P-110

L-80

C-95

P-110

COLLAPSE

PRESSURE

(PSI)

2,970

4,560

5,760

6,290

6,710

8,170

9,200

10,140

10,320

11,800

13,200

1,450

2,270

3,270

3,830

4,150

4,320

5,410

5,870

7,020

7,820

8,510

8,600

9,730

10,760

10,180

11,640

13,010

11,390

13,420

15,110

2,040

2,890

3,400

3,710

4,790

5,120

5,340

6,560

7,260

7,850

ROUND

(PSI)

4,180

5,110

7,440

8,830

10,230

8,810

10,460

12,120

10,040

11,920

13,800

2,310

3,740

4,360

6,340

7,530

4,980

7,240

8,600

8,160

9,690

11,220

9,060

10,760

12,460

9,960

11,830

13,700

10,800

12,820

14,850

2,750

4,140

6,020

7,150

6,890

8,180

9,470

7,900

9,380

10,860

BUTT.

(PSI)

4,180

5,110

7,440

8,830

10,230

8,810

10,460

12,120

9,820

11,660

13,500

---

---

4,360

6,340

7,530

4,980

7,240

8,600

8,160

9,690

11,220

8,460

10,050

11,640

8,460

10,050

11,640

8,460

10,050

11,640

4,140

5,650

6,020

7,150

6,890

8,180

9,470

7,900

9,380

10,860

PIPE

YIELD

STRENGTH

(1000 LB)

315

382

555

659

763

651

773

895

734

872

1,009

196

316

366

532

632

415

604

717

676

803

929

745

885

1,025

814

966

1,119

877

1,041

1,205

276

414

602

714

683

811

940

778

923

1,069

X-LINE

2700

3200

3700

SHORT

267

342

---

---

---

---

---

---

---

---

---

122

254

309

---

---

364

---

---

---

---

---

---

---

---

---

---

---

---

---

---

212

342

---

---

---

---

---

---

---

---

LONG

290

372

473

546

641

576

665

781

666

769

904

---

---

341

435

505

401

511

593

587

683

797

661

768

897

734

853

996

801

931

1,087

---

377

482

560

566

659

769

664

772

901

BUTT.

---

548

592

665

786

693

780

922

783

880

1040

---

---

522

565

636

592

641

722

718

808

955

791

891

1,053

833

920

1,096

833

920

1,096

---

581

635

716

721

813

960

820

925

1,093

X-LINE

---

605

605

668

796

648

716

852

717

793

944

---

---

632

632

699

641

641

709

685

757

902

850

841

1,002

850

940

1,118

917

1,013

1,207

---

700

700

774

700

774

922

766

846

1,008

SHORT

2670

3420

---

---

---

---

---

---

---

---

---

1220

2540

3090

---

---

3640

---

---

---

---

---

---

---

---

---

---

---

---

---

---

2120

3420

---

---

---

---

---

---

---

---

LONG

(FT-LBS)

2900

3720

4730

5490

6410

5760

6650

7810

6660

7690

9040

---

---

3410

4350

5050

4010

5110

5930

5870

6830

7970

6610

7680

8970

7340

8530

9960

8010

9310

10870

--

3770

4820

5600

5660

6590

7690

6640

7720

9010

JOINT TENSILE

STRENGTH (1000 LB)OPTIMUM MAKE-UP TORQUEBURST PRESSURE

ROUND

API CASING

RECOMMENDED MAKE-UP TORQUE FOR BUTTRESS CONNECTIONS IS THAT REQUIRED TO PLACE FACE OF COUPLING AT BASE OF THE TRIANGLE STAMP.

TADLOCK PIPE

5-7

ROUND

(PSI)

9,180

10,900

12,620

9,670

10,320

12,250

14,190

10,760

11,480

13,630

15,780

2,950

2,470

3,930

4,460

6,490

7,710

7,300

8,670

10,040

8,120

9,640

11,160

9,040

10,740

12,430

2,270

3,520

3,950

5,750

6,820

6,330

7,510

8,700

6,870

8,150

9,440

7,930

9,410

10,900

BUTT.

(PSI)

9,180

10,900

12,620

9,190

9,790

11,620

13,460

9,190

9,790

11,620

13,460

---

---

3,930

4,460

6,490

7,710

7,300

8,670

10,040

8,120

9,640

11,160

9,040

10,740

12,430

---

3,520

3,950

5,750

6,820

6,330

7,510

8,700

6,870

8,150

9,440

7,930

9,410

10,900

SIZE

O.D.

(IN.)

7-5/8

8-5/8

9-5/8

WEIGHT

T&C

(LBS/FT)

39.00

42.80

47.10

24.00

28.00

32.00

36.00

40.00

44.00

49.00

32.30

36.00

40.00

43.50

47.00

53.50

GRADE

L-80

C-95

P-110

C-75

L-80

C-95

P-110

C-75

L-80

C-95

P-110

K-55

H-40

K-55

K-55

L-80

C-95

L-80

C-95

P-110

L-80

C-95

P-110

L-80

C-95

P-110

H-40

K-55

K-55

L-80

C-95

L-80

C-95

P-110

L-80

C-95

P-110

L-80

C-95

P-110

COLLAPSE

PRESSURE

(PSI)

8,810

9,980

11,060

10,240

10,810

12,400

13,910

11,290

12,040

14,300

16,550

1,370

1,640

2,530

3,450

4,100

4,360

5,520

6,010

6,380

6,950

7,730

8,400

8,570

9,690

10,720

1,400

2,020

2,570

3,090

3,330

3,810

4,130

4,430

4,750

5,080

5,310

6,620

7,330

7,930

PIPE

YIELD

STRENGTH

(1000 LB)

895

1,063

1,231

935

998

1,185

1,372

1,031

1,100

1,306

1,512

381

318

503

568

827

982

925

1,098

1,271

1,021

1,212

1,404

1,129

1,341

1,553

365

564

630

916

1,088

1,055

1,193

1,381

1,086

1,289

1,493

1,244

1,477

1,710

X-LINE

3700

4200

4700

SHORT

---

---

---

---

---

---

---

---

---

---

---

263

233

402

468

---

---

---

---

---

---

---

---

---

---

---

254

423

486

---

---

---

---

---

---

---

---

---

---

---

LONG

786

914

1,066

852

892

1,037

1,210

953

997

1,159

1,353

---

---

452

526

678

789

776

904

1,055

874

1,017

1,186

983

1,144

1,335

---

489

561

727

847

813

948

1,106

893

1,040

1,213

1,047

1,220

1,422

BUTT.

945

1065

1258

1035

1053

1187

1402

1140

1160

1300

1545

---

---

690

780

864

976

966

1,092

1,288

1,066

1,206

1,423

1,180

1,334

1,574

---

755

843

947

1,074

1038

1178

1388

1122

1273

1500

1286

1456

1718

X-LINE

851

941

1120

---

---

---

---

---

---

---

---

---

---

869

871

871

963

942

1042

1240

1007

1113

1326

1007

1113

1326

---

---

975

975

1078

975

1078

1283

1032

1141

1358

1173

1297

1544

SHORT

---

---

---

---

---

---

---

---

---

---

---

2,330

2,330

4,020

4,680

---

---

---

---

---

---

---

---

---

---

---

2,540

4,230

4,860

---

---

---

---

---

---

---

---

---

---

---

LONG

(FT.-LBS)

7860

9140

10660

8520

8920

10370

12100

9530

9970

11590

13530

---

---

4520

5260

6780

7890

7760

9040

10550

8740

10170

11860

9830

11440

13350

---

4890

5610

7270

8470

8130

9480

11060

8930

10400

12130

10470

12200

14220

JOINT TENSILE STRENGTH (1000 LB) OPTIMUM MAKE-UP TORQUEBURST PRESSURE

ROUND

API CASING

RECOMMENDED MAKE-UP TORQUE FOR BUTTRESS CONNECTIONS IS THAT REQUIRED TO PLACE FACE OF COUPLING AT BASE OF THE TRIANGLE STAMP.

PERFORMANCE PROPERTIES

TADLOCK PIPE

5-8

SIZE

O.D.

(IN.)

10-3/4

11-3/4

13-3/8

16

18-5/8

20

WEIGHT

T&C

(LBS/FT)

32,75

40.50

45.50

51.00

55.50

60.70

65.70

42.00

47.00

54.00

60.00

48.00

54.50

61.00

68.00

72.00

65.00

75.00

84.00

87.50

94.00

106.10

133.00

GRADE

H-40

K-55

K-55

K-55

L-80

C-95

P-110

L-80

C-95

P-110

P-110

P-110

H-40

K-55

K-55

K-55

L-80

C-95

H-40

K-55

K-55

K-55

L-80

C-95

H-40

K-55

K-55

K-55

K-55

K-55

K-55

COLLAPSE

PRESSURE

(PSI)

880

1,580

2,090

2,700

3,220

3,490

3,670

4,020

4,300

4,630

5,860

7,490

1,070

1,510

2,070

2,660

3,180

3,440

770

1,130

1,540

1,950

2,670

2,820

670

1,020

1,410

630

520

770

1,500

ROUND

(PSI)

1,820

3,130

3,580

4,030

5,860

6,960

8,060

6,450

7,660

8,860

9,760

10,650

1,980

3,070

3,560

4,010

5,830

6,920

1,730

2,730

3,090

3,450

5,380

6,390

1,640

2,630

2,980

2,250

2,110

2,410

3,060

BUTT.

(PSI)

---

3,130

3,580

4,030

5,860

6,960

6,060

6,450

7,860

8,860

9,760

10,650

---

3,070

3,560

4,010

5,830

6,920

---

2,730

3,090

3,450

5,380

6,390

---

2,630

2,980

2,250

2,110

2,410

3,060

PIPE

YIELD

STRENGTH

(1000 LB)

367

629

715

801

1,185

1,383

1,602

1,276

1,515

1,754

1,922

2,088

478

737

850

952

1,384

1,644

541

853

962

1,069

1,661

1,973

736

1,178

1,326

1,367

1,480

1,685

2,125

X-LINE

5200

---

---

---

---

---

SHORT

205

450

528

606

794

927

1,080

884

1,032

1,203

1,338

1,472

307

509

606

693

913

1,066

322

547

633

718

1,029

1,204

439

752

865

794

824

960

1,253

LONG

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

955

1,113

1,453

BUTT.

---

819

931

1043

1190

1354

1594

1303

1483

1745

1912

2077

---

935

1079

1208

1399

1596

---

1038

1169

1300

1650

1893

---

1331

1499

1427

1479

1683

2123

X-LINE

1236

1383

1383

1529

1820

1515

1875

1993

2000

SHORT

2050

4500

5280

6060

7940

9270

10800

8840

10320

12030

13380

14720

3070

5090

6060

6930

9130

10660

3220

5470

6330

7180

10290

12040

4390

7520

8650

7940

8240

9600

12530

LONG

(FT.-LBS)

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

9550

11130

14530

JOINT TENSILE STRENGTH (1000 LB) OPTIMUM MAKE-UP TORQUEBURST PRESSURE

ROUND

API CASING

RECOMMENDED MAKE-UP TORQUE FOR BUTTRESS CONNECTIONS IS THAT REQUIRED TO PLACE FACE OF COUPLING AT BASE OF THE TRIANGLE STAMP.

TADLOCK PIPE

5-9

SIZE

O.D.

(IN.)

4-1/2

4-3/4

5

5-1/4

5-1/2

COMPOSITE CASING DIMENSIONAL DATANON API & DISCONTINUED API CASING

*DISCONTINUED API CASING.

DIMENSIONAL DATA

NOM.

T&C

6.75

---

11.00

---

12.80

16.60

17.70

18.80

19.10

21.60

24.60

26.50

7.25

9.50

---

*16.00

18.00

20.00

21.00

8.00

12.80

20.30

20.80

21.00

23.20

24.20

---

8.50

10.00

13.00

16.00

9.00

*13.00

*15.00

---

---

25.00

PLAIN

END

6.59

8.64

10.79

11.77

12.24

16.52

---

18.69

18.96

---

---

---

7.11

9.39

12.47

15.75

17.52

19.40

20.66

7.80

12.53

20.01

20.63

20.67

23.09

24.03

25.34

8.32

9.85

12.89

15.91

8.79

12.84

14.71

15.08

13.86

24.76

INSIDE

DIAMETER

(IN.)

DECIMAL

4.216

4.124

4.062

3.980

3.958

3.754

3.696

3.640

3.626

3.500

3.380

3.240

4.460

4.364

4.230

4.082

4.000

3.910

3.850

4.696

4.506

4.184

4.156

4.154

4.044

4.000

3.938

4.944

4.886

4.768

4.648

5.192

5.044

4.974

4.960

4.730

4.580

DRIFT

DIAMETER

(IN.)

4.091

3.999

3.937

3.855

3.833

3.629

3.571

3.515

3.501

3.375

3.255

3.115

4.335

4.239

4.105

3.957

3.875

3.785

3.725

4.571

4.381

4.059

4.031

4.029

3.919

3.875

3.813

4.819

4.761

4.643

4.523

5.068

4.919

4.849

4.835

4.605

4.455

WEIGHT

(LBS/FT) SIZE

O.D.

(IN.)

5-1/2

5-9/16

5-3/4

6

6-5/8

7

NOM.

T&C

26.00

26.80

---

29.70

32.00

---

36.40

15.00

---

*14.00

*17.00

*19.50

*22.50

25.20

10.50

12.00

14.00

*15.00

*16.00

---

17.00

*18.00

*20.00

*23.00

26.00

12.00

13.00

*17.00

---

19.45

22.00

25.20

26.50

*29.00

34.00

13.00

---

PLAIN

END

25.54

26.70

28.18

29.64

31.95

32.54

---

14.62

20.78

13.55

16.35

19.10

21.79

24.43

10.22

11.79

13.82

14.65

15.35

16.52

16.81

17.57

19.64

22.81

25.58

11.65

12.72

16.69

18.33

18.97

21.42

22.18

26.21

28.57

33.61

12.65

19.41

INSIDE

DIAMETER

(IN.)

DECIMAL

4.548

4.500

4.438

4.376

4.276

4.250

4.090

5.047

4.813

5.290

5.190

5.090

4.990

4.890

5.672

5.620

5.552

5.542

5.500

5.460

5.450

5.424

5.352

5.240

5.140

6.287

6.255

6.135

6.085

6.065

5.989

5.965

5.837

5.761

5.595

6.652

6.460

DRIFT

DIAMETER

(IN.)

4.423

4.375

4.313

4.251

4.151

4.125

3.965

4.922

4.688

5.165

5.065

4.965

4.865

4.765

5.547

5.495

5.472

5.399

5.375

5.335

5.325

5.299

5.227

5.115

5.012

6.162

6.130

6.010

5.960

5.940

5.864

5.840

5.712

5.636

5.047

6.527

6.335

WEIGHT

(LBS/FT)

TADLOCK PIPE

5-10

SIZE

O.D.

(IN.)

7

7-5/8

7-3/4

8

8-1/8

NOM.

T&C

33.00

*22.00

*24.00

*28.00

29.50

*30.00

33.70

34.00

35.30

40.00

---

42.70

44.00

---

---

---

---

---

---

---

14.75

*20.00

---

36.00

38.00

42.50

45.30

---

51.20

---

---

---

46.10

---

---

---

16.00

20.00

---

26.00

*28.00

*32.00

*35.50

*39.50

41.70

PLAIN

END

31.88

21.54

23.64

27.73

29.25

29.71

33.17

33.42

34.71

39.89

40.39

42.55

43.47

45.30

47.10

48.88

50.06

52.97

53.72

55.49

14.39

19.69

21.21

35.20

36.98

42.39

44.67

47.74

50.97

52.57

55.07

59.15

45.47

48.60

51.89

56.07

15.52

19.57

23.09

25.22

26.67

30.64

34.56

38.42

40.70

INSIDE

DIAMETER

(IN.)

DECIMAL

6.384

6.398

6.336

6.214

6.168

6.154

6.048

6.040

6.000

5.836

5.820

5.750

5.720

5.660

5.562

5.540

5.500

5.400

5.374

5.312

7.263

7.125

7.085

6.705

6.655

6.501

6.435

6.345

6.249

6.201

6.125

5.999

6.560

6.470

6.374

6.250

7.628

7.528

7.440

7.386

7.485

7.385

7.285

7.185

7.125

DRIFT

DIAMETER

(IN.)

6.259

6.273

6.151

6.089

6.043

6.029

5.923

5.915

5.875

5.711

5.695

5.625

5.595

5.535

5.500

5.415

5.375

5.275

5.250

5.187

7.138

7.000

6.960

6.580

6.530

6.376

6.310

6.250

6.125

6.076

6.000

5.875

6.500

6.375

6.250

6.125

7.503

7.403

7.315

7.261

7.360

7.260

7.160

7.060

7.000

COMPOSITE CASING DIMENSIONAL DATANON API & DISCONTINUED API CASING

DIMENSIONAL DATA

WEIGHT

(LBS/FT) SIZE

O.D.

(IN.)

8-5/8

8-3/4

9

9-5/8

9-3/4

9-7/8

10

10-3/4

NOM.

T&C

17.50

20.00

25.55

---

29.35

32.40

*38.00

*43.00

48.00

52.00

49.70

19.00

---

*34.00

*38.00

50.20

*55.00

*40.00

*45.00

*29.30

38.00

42.00

58.40

59.40

---

61.10

64.90

---

70.30

71.80

---

59.20

62.80

22.75

30.25

---

41.50

45.50

50.50

55.50

35.75

40.00

45.00

48.00

PLAIN

END

16.94

19.49

24.70

24.96

28.55

31.27

37.22

42.32

46.95

51.03

---

18.42

26.98

32.78

36.91

49.21

53.32

38.92

44.02

28.04

36.57

40.63

57.38

58.64

60.08

60.71

64.26

65.67

69.70

71.09

76.51

---

---

21.85

29.37

30.07

41.01

44.22

49.96

55.13

34.24

38.66

43.68

46.76

INSIDE

DIAMETER

(IN.)

DECIMAL

8.249

8.191

8.071

8.065

7.981

7.917

7.775

7.651

7.537

7.435

7.636

8.608

8.420

8.290

8.196

7.910

7.812

8.150

8.032

9.063

8.885

8.799

8.435

8.407

8.375

8.375

8.281

8.249

8.157

8.125

7.999

8.560

8.625

9.582

9.434

9.420

9.200

9.120

9.016

8.908

10.136

10.054

9.960

9.902

DRIFT

DIAMETER

(IN.)

8.124

8.066

7.946

7.940

7.856

7.792

7.590

7.526

7.412

7.310

7.500

8.483

8.295

8.165

8.071

7.785

7.687

8.025

7.907

8.907

8.760

8.674

8.279

8.251

8.250

8.219

8.125

8.093

8.001

7.969

7.843

8.500

8.500

9.457

9.309

9.295

9.075

8.995

8.891

8.783

10.011

9.929

9.835

9.777

WEIGHT

(LBS/FT)

*DISCONTINUED API CASING.

TADLOCK PIPE

5-11

SIZE

O.D.

(IN.)

10-3/4

11

11-3/4

12

12-3/4

13

13-3/8

13-1/2

13-5/8

14

NOM.

T&C

54.00

---

71.10

73.20

79.20

81.00

26.75

---

*38.00

---

65.00

66.70

71.00

73.60

80.50

87.20

31.50

40.00

---

43.00

45.45

51.15

53.00

---

36.50

40.00

45.00

---

50.00

54.00

77.00

80.70

*83.00

85.00

88.00

92.60

98.00

81.40

88.20

42.00

50.00

---

57.00

PLAIN

END

52.96

54.74

69.89

72.33

78.52

79.10

25.78

35.39

36.69

40.25

---

65.45

---

72.46

79.51

86.36

30.51

38.46

38.70

41.19

43.77

49.56

51.48

65.42

35.25

38.17

43.33

47.29

48.47

52.52

---

---

81.86

82.90

---

91.17

97.16

---

---

40.45

47.89

51.02

54.57

INSIDE

DIAMETER

(IN.)

DECIMAL

9.784

9.750

9.450

9.406

9.282

9.250

10.552

10.380

11.150

11.090

10.682

10.656

10.586

10.532

10.406

10.282

11.514

11.384

11.350

12.130

12.090

12.000

11.970

11.750

12.482

12.438

12.360

12.300

12.282

12.220

10.711

12.215

12.175

12.159

12.125

12.031

11.937

12.340

12.375

13.448

13.344

13.300

13.250

DRIFT

DIAMETER

(IN.)

9.659

9.625

9.294

9.250

9.126

9.094

10.396

10.224

10.996

10.934

10.526

10.500

10.430

10.376

10.250

10.126

11.358

11.228

11.194

11.974

11.934

11.844

11.814

11.594

12.326

12.282

12.204

12.144

12.126

12.064

10.625

12.059

12.019

12.003

11.969

11.875

11.781

12.250

12.250

13.292

13.188

13.144

13.094

COMPOSITE CASING DIMENSIONAL DATANON API & DISCONTINUED API CASING

DIMENSIONAL DATA

WEIGHT

(LBS/FT) SIZE

O.D.

(IN.)

15

16

17

18

18-5/8

20

21-1/2

22

24

24-1/2

30

NOM.

T&C

47.50

61.15

---

52.50

*55.00

---

70.00

109.00

128.00

146.00

73.20

---

78.00

81.20

---

---

84.00

87.50

96.50

78.00

---

96.50

90.00

90.00

90.00

---

133.00

169.00

92.50

103.00

114.00

92.50

---

103.00

114.00

----

100.50

113.00

304.00

100.50

113.00

235.00

310.00

PLAIN

END

45.71

58.57

59.33

50.63

52.36

63.39

66.80

107.50

126.94

146.05

69.70

70.58

75.74

76.84

81.60

81.97

82.06

85.44

94.72

75.00

73.09

93.96

87.22

85.58

84.75

104.10

---

---

89.03

100.07

111.05

89.78

101.00

100.41

111.67

114.80

97.60

110.22

---

92.60

109.28

---

---

INSIDE

DIAMETER

(IN.)

DECIMAL

14.418

14.250

14.240

15.396

15.375

15.240

15.198

14.688

14.438

14.188

16.214

17.250

17.194

17.182

17.130

17.126

17.124

17.088

16.986

17.855

17.875

17.655

19.166

19.182

19.190

19.000

18.750

18.376

20.710

20.610

20.510

21.222

21.125

21.128

21.028

21.000

23.226

23.124

21.500

23.750

23.650

28.500

28.000

DRIFT

DIAMETER

(IN.)

14.262

14.094

14.084

15.209

15.188

15.053

15.011

14.500

14.250

14.000

16.027

17.063

17.007

16.995

16.943

16.939

16.937

16.900

16.799

17.668

17.688

17.468

18.979

18.995

19.003

18.818

18.563

18.188

20.523

20.423

20.323

21.035

20.938

20.941

20.841

20.813

23.039

22.937

21.313

23.563

23.463

28.313

27.813

WEIGHT

(LBS/FT)

*DISCONTINUED API CASING

TADLOCK PIPE

5-12

DIMENSIONAL DATA

COUPLINGAPI

SIZE

O.D.

(IN.)

4-1/2

5-1/2

7

7-5/8

8-5/8

WEIGHT

T&C

(LBS/FT)

9.50

10.50

11.60

13.50

15.10

14.00

15.50

17.00

20.00

23.00

17.00

20.00

23.00

26.00

29.00

32.00

35.00

38.00

24.00

26.40

29.70

33.70

39.00

45.30

24.00

28.00

32.00

36.00

40.00

44.00

49.00

I.D.

(IN.)

4.090

4.052

4.000

3.920

3.826

5.012

4.950

4.892

4.778

4.670

6.538

6.456

6.366

6.276

6.184

6.094

6.004

5.920

7.025

6.969

6.875

6.765

6.625

6.435

8.097

8.017

7.921

7.825

7.725

7.625

7.511

DRIFT

DIAMETER

(IN.)

3.965

3.927

3.875

3.795

3.701

4.887

4.825

4.767

4.653

4.545

6.413

6.331

6.241

6.151

6.059

5.969

5.879

5.795

6.900

6.844

6.750

6.640

6.500

6.310

7.972

7.892

7.796

7.700

7.600

7.500

7.386

PIN

LENGTH

(IN.)

3.281

3.594

4.094

4.313

4.781

LENGTH

(IN.)

7-1/4

7-7/8

8-7/8

9-1/4

10-1/4

SPEC.CL.

(IN.)

4.875

5.875

7.375

8.125

9.125

REG.

(IN.)

5.000

6.050

7.656

8.500

9.625

ARMCO SEAL-LOCK CASING

1-1/4” TAPER PER FOOT.5 THREADS PER INCH.

O.D.

TADLOCK PIPE

5-13

PERFORMANCE PROPERTIES

OPTIMUM MAKE

UP TORQUE

ALL GRADES

(FT.-LBS)

1600

3500

5000

5500

6000

K-55

PSI

3310

4010

4960

---

---

3120

4040

4910

---

---

---

2270

3270

4320

---

---

---

---

---

2890

---

---

---

---

1370

---

2530

3450

---

---

---

P-110

1000#

---

---

367

422

485

---

---

546

641

729

---

---

---

830

929

1025

1119

1194†

---

---

940

1069

1231

---

---

---

---

---

1271

1404

1553

N-80

1000#

---

---

267

307

---

---

---

397

466

530

---

---

532

604

676

745

814

877

---

602

683

778

895

---

---

---

---

827

925

1021

1129

K-55

1000#

152

165

184

---

---

222

248

273

---

---

---

316

366

415

---

---

---

---

---

414

---

---

---

---

381

---

503

568

---

---

---

P-110

PSI

---

---

10690

12410

14420

---

---

10640

12640

14520

---

---

---

9960

11220

12460

13700

14850

---

---

9470

10860

12620

---

---

---

---

---

10040

11160

12430

N-80

PSI

---

---

7780

9020

---

---

---

7740

9190

10560

---

---

6340

7240

8160

9060

9960

10800

---

6020

6890

7900

9180

---

---

---

---

6490

7300

8120

9040

K-55

PSI

4380

4790

5350

---

---

4270

4810

5320

---

---

---

3740

4360

4980

---

---

---

---

---

4140

---

---

---

---

2950

---

3930

4460

---

---

---

P-110

PSI

---

---

7560

10670

14320

---

---

7460

11080

14520

---

---

---

6210

8510

10760

13010

15110

---

---

5340

7850

11060

---

---

---

---

---

6380

8400

10720

N-80

PSI

---

---

6350

8540

---

---

---

6280

8830

11160

---

---

3830

5410

7020

8600

10180

11390

---

3400

4790

6560

8810

---

---

---

---

4100

5520

6950

8570

COLLAPSE PRESSURE BURST PRESSURE PIPE YIELD STRENGTH*

ARMCO NU-LOCK CASING

*JOINT STRENGTH MEETS OR EXCEEDS 100% EXCEPT AS NOTED BELOW.† JOINT STRENGTH IS SHOWN AND IS LESS THAN THE PIPE YIELD STRENGTH.ºMAKE-UP TORQUE FOR SPECIAL CLEARANCE ITEMS (NONE SHOWN ON THIS CHART) WILL BE 1000 FT.-LBS. LESS.

TADLOCK PIPE

5-14

DIMENSIONAL DATA

COUPLINGAPI

SIZE

O.D.

(IN.)

9-5/8

10-3/4

13-3/8

WEIGHT

T&C

(LBS/FT)

32.30

36.00

40.00

43.50

47.00

53.50

58.40

61.10

71.80

32.75

40.50

45.50

51.00

55.50

60.70

66.70

71.10

48.00

54.50

61.00

68.00

72.00

I.D.

(IN.)

9.001

8.921

8.835

8.755

8.681

8.535

8.435

8.375

8.125

10.192

10.050

9.950

9.850

9.760

9.660

9.560

9.450

12.715

12.615

12.515

12.415

12.347

DRIFT

DIAMETER

(IN.)

8.845

8.765

8.679

8.599

8.525

8.379

8.279

8.219

7.969

10.036

9.894

9.794

9.694

9.604

9.504

9.404

9.294

12.559

12.459

12.359

12.259

12.191

PIN

LENGTH

(IN.)

4.781

4.781

4.813

LENGTH

(IN.)

10-1/4

10-1/4

10-1/4

SPEC. CL.

(IN.)

10.250

11.250

---

REG.

(IN.)

10.625

11.750

14.375

ARMCO SEAL-LOCK CASING

1-1/4” TAPER PER FOOT.5 THREADS PER INCH.

O.D.

TADLOCK PIPE

5-15

PERFORMANCE PROPERTIES

OPTIMUM MAKE

UP TORQUE

ALL GRADES

(FT.-LBS)

7000

7500

7500

K-55

PSI

---

2020

2570

---

---

---

---

---

---

---

1580

2090

2700

---

---

---

---

---

1130

1540

1950

---

P-110

1000#

---

---

---

1381

1493

1710

---

---

---

---

---

---

1602

1754

1922

2088

2269

---

---

---

---

2596

N-80

1000#

---

---

916

1005

1086

1244

---

---

---

---

---

---

1165

1276

---

---

---

---

---

---

1555

1661

K-55

1000#

---

564

630

---

---

---

---

---

---

---

629

715

801

---

---

---

---

---

853

962

1069

---

P-110

PSI

---

---

---

8700

9440

10900

---

---

---

---

---

---

8060

8860

9760

10650

11640

---

---

---

---

7400

N-80

PSI

---

---

5750

6330

6870

7930

---

---

---

---

---

---

5860

6450

---

---

---

---

---

---

5020

5380

K-55

PSI

---

3520

3950

---

---

---

---

---

---

---

3130

3580

4030

---

---

---

---

---

2730

3090

3450

---

P-110

PSI

---

---

---

4430

5310

7930

---

---

---

---

---

---

3670

4630

5860

7490

9280

---

---

---

---

2880

N-80

PSI

---

---

3090

3810

4750

6620

---

---

---

---

---

---

3220

4020

---

---

---

---

---

---

2260

2670

COLLAPSE PRESSURE BURST PRESSURE PIPE YIELD STRENGTH*

ARMCO NU-LOCK CASING

*JOINT STRENGTH MEETS OR EXCEEDS 100%.†MAKE-UP TORQUE FOR SPECIAL CLEARANCE ITEMS (NONE SHOWN ON THIS CHART) WILL BE 1000 FT.-LBS LESS.

TADLOCK PIPE

5-16

DIMENSIONAL DATA

HYDRIL “SUPER EU” CASING

6 THREADS PER INCH FOR 5” THROUGH 7” CASING.4 THREADS PER INCH FOR 7-5/8” THROUGH 10-3/4” CASING.

CONNECTIONAPI

SIZE

O.D.

(IN.)

5

5-1/2

5-5/8

7

7-5/8

8-5/8

9-5/8

10-3/4

WEIGHT

LBS/FT.

15

18

20.3

23.2

15.5

17

20

23

26

24

28

32

23

26

29

32

35

38

26.4

29.7

33.7

39

45.3

32

36

40

44

49

36

40

43.5

47

53.5

58.4

45.5

51

55.5

60.7

65.7

I.D.

(IN.)

4.408

4.276

4.184

4.044

4.950

4.892

4.778

4.670

4.548

5.921

5.791

5.675

6.366

6.276

6.184

6.094

6.004

5.920

6.969

6.875

6.765

6.625

6.435

7.921

7.825

7.725

7.625

7.511

8.921

8.835

8.755

8.681

8.535

8.435

9.950

9.850

9.760

9.660

9.560

DRIFT

DIAMETER

(IN.)

4.283

4.151

4.059

3.919

4.825

4.767

4.653

4.545

4.423

5.796

5.666

5.550

6.241

6.151

6.059

5.969

5.879

5.795

6.844

6.750

6.640

6.500

6.310

7.796

7.700

7.600

7.500

7.386

8.765

8.697

8.599

8.525

8.379

8.279

9.794

9.694

9.604

9.504

9.404

PIN

LENGTH

(IN.)

3.062

3.062

3.062

3.062

3.437

3.437

3.437

3.437

3.419

3.812

3.812

3.794

3.750

3.750

3.732

3.732

3.732

3.732

4.125

4.125

4.125

4.125

4.107

4.125

4.125

4.125

4.107

4.107

4.187

4.187

4.187

4.187

4.187

4.187

4.687

4.669

4.669

4.651

4.651

I.D.

(IN.)

4.328

4.196

4.104

3.964

4.870

4.812

4.698

4.590

4.468

5.841

5.711

5.595

6.286

6.196

6.104

6.014

5.924

5.840

6.889

6.795

6.685

6.545

6.355

7.841

7.745

7.645

7.545

7.431

8.811

8.725

8.655

8.581

8.435

8.355

9.850

9.750

9.660

9.560

9.460

O.D.

(IN.)

5.370

5.420

5.420

5.420

5.900

5.900

6.000

6.000

6.068

7.072

7.072

7.152

7.444

7.444

7.572

7.572

7.572

7.635

8.125

8.250

8.250

8.250

8.312

9.135

9.135

9.135

9.300

9.300

10.165

10.165

10.165

10.165

10.165

10.165

11.250

11.375

11.375

11.500

11.500

TADLOCK PIPE

5-17

PERFORMANCE PROPERTIES

K-55

PSI

5550

7390

8240

9510

4040

4910

6610

7670

8700

4560

6170

7320

3270

4320

5400

6460

7270

7830

2890

3910

5090

---

7910

2530

3450

4400

5350

---

2020

2570

3250

3880

---

---

2090

2700

3390

---

---

K-55 & N/L-80

(FT.-LBS)

5,000

6,000

7,500

8,500

9,000

11,000

13,000

15,000

P-110

1000#

481

580

647

691†

497

546

641

729

826

763

895

1009

732

830

929

1025

1119

1205

827

940

1069

1231

1444†

1006

1137

1271

1404

1553

1128

1260

1381

1493

1639†

1639†

1430

1602

1754

1922

2080

N-80

1000#

350

422

471

543

362

397

466

530

601

555

651

734

532

604

676

745

814

877

602

633

778

895

1051

732

827

925

1021

1129

820

916

1005

1086

1244

1311†

1041

1165

1276

1390

1519

K-55

1000#

241

290

324

373

248

273

321

365

413

382

447

504

366

415

465

512

559

603

414

469

535

615

723

503

568

636

702

776

564

630

691

746

855

928

715

801

877

961

1134

P-110

PSI

11400

13940

15710

18400

9630

10640

12640

14530

16660

10230

12120

13800

8720

9960

11220

12480

13700

14850

8280

9470

10860

12620

15020

7860

8930

10040

11160

12430

7040

7900

8700

9440

10900

12180

7160

8060

8860

9760

10650

N/L-80

PSI

8290

10140

11420

13380

7000

7740

9190

10560

12120

7440

8810

10040

6340

7240

8160

9060

9960

10800

6020

6890

7890

9180

10920

5710

6490

7300

8120

9040

5120

5750

6330

6870

7930

8860

5210

5860

6450

7100

7750

K-55

PSI

5700

6970

7850

9200

4810

5320

6320

7260

8330

5110

6060

6900

4360

4980

5610

6230

6850

7420

4140

4730

5430

---

7510

3930

4460

5020

5580

---

3520

3950

4350

4720

---

---

3580

4030

4430

---

---

P-110

PSI

8830

13450

16490

19020

5610

7460

11080

14520

17390

6710

10140

13200

4450

6210

8510

10760

13010

15110

3930

5340

7850

11060

15420

3430

4700

6380

8400

10710

2470

3480

4430

5310

7930

10260

2610

3670

4630

5860

7490

N/L-80

PSI

7250

10490

11990

13830

4990

6280

8830

11160

12650

5760

8170

10320

3830

5410

7020

8600

10180

11390

3400

4790

6560

8810

11510

3050

4100

5520

6950

8570

2370

3090

3810

4750

6620

8250

2480

3220

4020

5160

6300

P-110

(FT.-LBS)

7,000

8,000

10,000

12,000

13,000

15,000

17,000

19,000

COLLAPSE PRESSURE BURST PRESSURE PIPE YIELD STRENGTH* RECOMMENDED MAKE-UP TORQUE

*JOINT EFFICIENCY 100% OR MORE EXCEPT AS NOTED BELOW.† JOINT STRENGTH IS SHOWN AND IS LESS THAN THE PIPE YIELD STRENGTH.

TADLOCK PIPE

5-18

DIMENSIONAL DATAHYDRIL FJ/FJ-P CASING

(1) NOT TO API DRIFT SPECIFICATIONS{ BRACKETED WEIGHTS ARE INTERCHANGEABLEHYDRIL FJ/FJ-P CASING CONNECTION INTERCHANGEABLE WITH HYDRIL SUPER FJ/SUPER FJ-P “P”-FEATURED CON-NECTIOINS ARE NOT INTERCHANGEABLE WITH NON-”P”-FEATURED CONNECTIONS.

CONNECTIONAPI

SIZE

O.D.

(IN.)

4-1/2

4-1/2

4-1/2

4-1/2

5

5

5

5

5

5

5-1/2

5-1/2

5-1/2

5-1/2

6-5/8

6-5/8

6-5/8

7

7

7

7

7

7

7-5/8

7-5/8

7-5/8

7-5/8

7-5/8

7-3/4

8-5/8

8-5/8

8-5/8

8-5/8

8-5/8

8-5/8

9-5/8

9-5/8

9-5/8

9-5/8

9-5/8

9-5/8

WEIGHT

(LBS/FT)

12.6

13.5

15.1

18.8

15

18

20.3

20.8

23.2

24.1

17

20

23

26

24

28

32

23

26

29

32

35

38

26.4

29.7

33.7

39

45.3

46.1

32

36

40

44

49

52

36

40

43.5

47

53.5

58.4

CONNECT.

TYPE

FJ

FJ

FJ-P

FJ-P

FJ

FJ-P

FJ-P

FJ-P

FJ-P

FJ-P

FJ

FJ-P

FJ-P

FJ-P

FJ

FJ-P

FJ-P

FJ

FJ-P

FJ-P

FJ-P

FJ-P

FJ-P

FJ-P

FJ-P

FJ-P

FJ-P

FJ-P

FJ-P

FJ-P

FJ-P

FJ-P

FJ-P

FJ-P

FJ-P

FJ-P

FJ-P

FJ-P

FJ-P

FJ-P

FJ-P

PLAIN

END

WEIGHT

(LBS/FT.)

12.24

13.04

14.98

18.69

14.87

17.93

20.01

20.63

23.09

24.03

16.87

19.81

22.54

25.54

23.58

27.65

31.20

22.63

25.66

28.72

31.68

34.58

37.26

25.56

29.04

33.04

38.05

44.67

45.47

31.10

35.14

39.29

43.39

48.00

51.03

34.86

38.94

42.70

46.14

52.85

57.38

I.D.

(IN.)

3.958

3.920

3.826

3.640

4.408

4.276

4.184

4.156

4.044

4.000

4.892

4.778

4.670

4.548

5.921

5.791

5.675

6.366

6.276

6.184

6.094

6.004

5.920

6.969

6.875

6.765

6.625

6.435

6.560

7.921

7.825

7.725

7.625

7.511

7.435

8.921

8.35

8.755

8.681

8.535

8.435

I.D.

(IN.)

3.958

3.920

3.826

3.640

4.408

4.276

4.184

4.156

4.044

4.000

4.892

4.778

4.670

4.548

5.921

5.791

5.675

6.366

6.276

6.184

6.094

6.004

5.920

6.969

6.875

6.765

6.625

6.435

6.560

7.921

7.825

7.725

7.625

7.511

7.435

8.921

8.835

8.755

8.681

8.535

8.435

PIN

LENGTH

(IN.)

2.750

2.750

2.750

2.750

2.940

3.000

3.000

3.000

3.000

3.000

3.310

3.375

3.438

3.438

3.630

3.688

3.688

3.030

3.625

3.688

3.688

3.750

3.750

3.625

3.625

3.688

3.750

3.750

3.750

3.656

3.656

3.750

3.750

3.750

4.130

3.656

3.688

3.688

3.688

4.125

4.125

DRIFT

DIAMETER

(IN.)

3.833

3.795

3.701

3.515

4.283

4.151

4.059

4.031

3.919

3.875

4.767

4.653

4.545

4.423

5.796

5.666

5.550

6.241

6.151

6.059

5.969

5.879

5.795

6.844

6.750

6.640

6.500

6.310

6.500(1)

7.796

7.700

7.600

7.500

7.386

7.310

8.765

8.679

8.599

8.525

8.379

8.279

TADLOCK PIPE

5-19

PERFORMANCE PROPERTIES

K-55

PSI

---

6,420

7,620

9,510

5,550

7,390

8,240

8,500

9,510

9,900

4,910

6,620

7,670

8,700

4,560

6,170

7,320

3,270

4,320

5,4000

6,460

7,270

7,830

2,890

3,910

5,090

6,600

7,910

7,800

2,530

3,450

4,400

5,350

6,440

7,060

2,020

2,570

3,250

3,880

5,130

5,990

P-110

2,200

2,200

2,200

2,200

2,800

2,800

2,800

2,800

2,800

2,800

3,400

3,400

3,400

3,400

4,800

4,800

4,800

4,500

5,000

5,000

5,000

5,000

5,000

5,000

6,000

6,000

6,000

6,000

7,500

6,000

7,000

7,500

7,500

7,500

7,500

8,000

9,000

9,000

9,000

9,000

9,000

N/L-80

1,500

1,500

1,500

1,500

1,900

1,900

1,900

1,900

1,900

1,900

2,300

2,300

2,300

2,300

3,200

3,200

3,200

3,500

3,500

3,500

3,500

3,500

3,500

4,200

4,200

4,200

4,200

4,200

5,100

5,100

5,100

5,100

5,100

5,100

5,100

6,200

6,200

6,200

6,200

6,200

6,200

K-55

1,500

1,500

1,500

1,500

1,900

1,900

1,900

1,900

1,900

1,900

2,300

2,300

2,300

2,300

3,200

3,200

3,200

3,500

3,500

3,500

3,500

3,500

3,500

4,200

4,200

4,200

4,200

4,200

5,100

5,100

5,100

5,100

5,100

5,100

5,100

6,200

6,200

6,200

6,200

6,200

6,200

P-110

1000#

227

227

290

290

276

351

351

351

351

351

315

389

389

389

421

539

539

429

500

551

601

668

668

463

570

665

741

741

873

573

678

721

846

846

967

640

740

832

913

1,083

1,083

N/L-80

1000#

189

189

232

232

220

281

281

281

281

281

252

311

311

311

337

431

431

343

400

441

481

534

534

371

456

532

593

593

698

458

542

577

677

677

773

512

592

666

731

866

866

C-75/L-80

1000#

180

180

220

220

209

267

267

267

267

267

239

296

296

296

320

409

409

326

380

419

457

507

507

352

433

505

563

563

663

435

515

548

643

643

735

487

563

633

694

823

823

P-110

PSI

---

12,410

14,420

18,390

11,400

13,940

15,710

16,250

18,400

19,250

10,640

12,640

14,530

16,660

10,230

12,120

13,800

8,720

9,950

11,220

12,460

13,700

14,850

8,280

9,470

10,860

12,620

15,020

14,780

7,860

8,930

10,040

11,160

12,430

13,280

7,040

7,900

8,700

9,440

10,900

11,900

N/L-80

PSI

---

9,020

10,480

13,380

8,290

10,140

11,420

11,820

13,380

14,000

7,740

9,190

10,560

12,120

7,440

8,810

10,040

6,340

7,240

8,160

9,060

9,960

10,800

6,020

6,890

7,900

9,180

10,920

10,750

5,710

6,490

7,300

8,120

9,040

9,660

5,120

5,750

6,330

6,870

7,930

8,650

K-55

PSI

---

6,200

7,210

9,200

5,700

6,970

7,850

8,120

9,200

9,630

5,320

6,320

7,260

8,330

5,110

6,060

6,900

4,360

4,980

5,610

6,230

6,850

7,420

4,140

4,730

5,430

6,310

7,510

7,390

3,930

4,460

5,020

5,580

6,220

6,640

3,520

3,950

4,350

4,720

5,450

5,950

P-110

PSI

---

10,670

14,320

19,010

8,830

13,450

16,490

17,000

19,020

19,800

7,460

11,080

14,520

17,390

6,710

10,140

13,210

4,450

6,210

8,510

10,760

13,010

15,110

3,930

5,340

7,850

11,060

15,420

14,980

3,430

4,700

6,380

8,400

10,710

12,260

2,470

3,480

4,430

5,310

7,930

9,750

N/L-80

PSI

---

8,540

11,080

13,830

7,250

10,490

11,990

12,360

13,830

14,400

6,280

8,830

11,160

12,650

5,760

8,170

10,320

3,830

5,410

7,020

8,600

10,180

11,390

3,400

4,790

6,560

8,810

11,510

11,340

3,050

4,100

5,520

6,950

8,570

9,650

2,370

3,090

3,810

4,750

6,620

7,890

PIPE COLLAPSE PRESSURE PIPE BURST PRESSURE JOINT YIELD STRENGTH† OPTIMUM MAKE-UP TORQUE

HYDRIL FJ/FJ-P CASING

† TENSION STRENGTHS CALCULATED ON C-75/L-80 = 95,000 ULTIMATE; N-80 = 100,000 ULTIMATE; P-110 = 125,000 ULTIMATE.

TADLOCK PIPE

5-20

DIMENSIONAL DATA

HYDRIL CASING“SUPER FJ” & “SUPER FJ-P”

2-3/8 THROUGH 4-1/2 CSG. 8 THREADS PER INCH; 5 THROUGH 7-3/4 CSG. 6 THREADS PER INCH; 8-5/8 THROUGH 13-3/8 CSG 4 THREADS PER INCH.* ONLY THESE WEIGHTS ARE SUPER FJ; ALL OTHER WEIGHTS ARE SUPER FJ-P• NOT TO API DRIFT SPECIFICATION

INTERCHANGEABLE WITH HYDRIL FJ & FJ-P“P”-FEATURED CONNECTIONS NOT INTERCHANGEABLE WITH NON-”P” FEATURED CONNECTIONS} BRACKETED WEIGHTS ARE INTERCHANGEABLE

CONNECTIONAPI

SIZE

O.D.

(IN.)

2-3/8

2-7/8

3-1/2

4

4-1/2

5

5-1/2

6-5/8

WEIGHT

T&C

LBS/FT.

4.6*

6.4*

8.7*

9.2*

10.2*

12.8*

12.95*

15.5*

11*

11.6*

13.4*

12.6*

13.5*

15.1

18.8

21.6

15*

18

20.3

20.8

23.2

24.1

17*

20

23

26

28.4

32

36.4

24*

28

32

35

I.D.

(IN.)

1.995

2.441

2.259

2.992

2.922

2.764

2.750

2.602

3.476

3.428

3.340

3.958

3.920

3.826

3.640

3.500

4.408

4.276

4.184

4.156

4.044

4.000

4.892

4.778

4.670

4.548

4.440

4.276

4.090

5.921

5.791

5.675

5.575

DRIFT

DIAMETER

(IN.)

1.901

2.347

2.165

2.867

2.797

2.639

2.625

2.477

3.351

3.303

3.215

3.833

3.795

3.701

3.515

3.375

4.283

4.151

4.059

4.031

3.919

3.875

4.767

4.653

4.545

4.423

4.315

4.151

3.965

5.796

5.666

5.550

5.450

PIN

LENGTH

(IN.)

2.094

2.125

2.188

2.625

2.656

2.688

2.688

2.750

2.625

2.625

2.688

2.750

2.750

2.750

2.750

2.780

3.000

3.000

3.000

3.000

3.000

3.000

3.375

3.375

3.438

3.438

3.438

3.062

3.062

3.625

3.688

3.688

3.688

I.D.

(IN.)

1.945

2.375

---

2.930

2.860

2.700

2.685

2.540

3.395

3.350

3.260

3.880

3.840

3.746

3.560

3.500

4.328

4.196

4.104

4.076

3.964

3.920

4.812

4.698

4.590

4.468

4.360

4.276

4.090

5.841

5.711

5.595

---

O.D.

(IN.)

2-7/16

2-31/32

2.965

3-19/32

3-19/32

3-19/32

3-19/32

3-19/32

4-3/32

4-3/32

4-3/32

4-19/32

4-19/32

4-19/32

4-19/32

4.700

5-3/32

5-3/32

5-3/32

5-3/32

5.150

5.150

5-5/8

5-5/8

5-5/8

5-5/8

5.790

5.681

5.681

6-3/4

6-3/4

6-25/32

6.781

TADLOCK PIPE

5-21

PERFORMANCE PROPERTIES

C-75

PSI

11,040

10,570

14,350

10,040

11,360

14,110

14,350

---

8,410

9,790

11,350

7,200

8,170

10,390

12,960

14,810

6,970

10,000

11,240

11,590

12,970

13,500

6,070

8,440

10,460

11,860

13,060

14,830

16,760

5,570

7,830

9,830

10,940

P-110

LBS

79

115

214

171

199

263

269

312

198

229

272

243

282

310

378

453

297

375

450

450

450

485

339

414

515

560

688

566

566

461

586

703

749

N-80

LBS

66

96

178

143

166

219

224

262

165

191

227

202

226

248

303

362

238

300

360

360

360

388

271

332

412

448

550

453

453

369

469

562

599

C-75

LBS

63

91

169

136

157

208

213

249

157

181

215

192

215

236

288

344

226

285

342

342

342

387

258

315

391

426

523

430

430

351

445

534

569

P-110

PSI

---

---

---

---

---

---

---

---

---

---

---

---

12,410

14,420

18,390

21,390

11,400

13,940

15,710

16,250

18,400

19,250

10,640

12,640

14,530

16,660

18,550

21,420

24,680

10,230

12,120

13,800

15,250

L/N-80

PSI

11,200

10,570

15,000

10,160

11,560

14,730

15,000

17,960

9,170

10,010

11,550

8,430

9,020

10,480

13,380

15,560

8,290

10,140

11,420

11,820

13,380

14,000

7,740

9,190

10,560

12,120

13,490

15,580

17,950

7,440

8,810

10,040

11,090

C-75

PSI

10,500

9,910

14,060

9,520

10,840

13,800

14,060

---

8,600

9,390

10,830

7,900

8,460

9,830

12,540

14,580

7,770

9,500

10,710

11,080

12,550

13,130

7,250

8,610

9,900

11,360

12,650

14,660

16,820

6,970

8,260

9,410

10,400

P-110

PSI

---

---

---

---

---

---

---

---

---

---

---

---

10,670

14,320

19,010

21,730

8,830

13,450

16,490

17,000

19,020

19,800

7,460

11,080

14,520

17,390

19,160

21,760

24,590

6,710

10,140

13,210

15,850

L/N-80

PSI

11,780

11,170

15,300

10,530

12,120

15,060

15,310

17,890

8,800

10,270

12,110

7,500

8,540

11,080

13,830

15,800

7,250

10,490

11,990

12,360

13,830

14,400

6,280

8,830

11,160

12,650

13,930

15,820

17,880

5,760

8,170

10,320

11,670

700

1,000

1,000

1,300

1,300

1,300

1,300

1,300

1,800

1,800

1,800

2,500

2,500

3,200

3,200

3,200

3,000

3,800

3,800

3,800

3,800

3,800

3,500

4,500

4,500

4,500

4,500

5,000

5,000

4,800

6,000

6,000

6,000

---

---

1,000

---

---

1,900

1,900

1,900

1,800

1,800

1,800

2,500

2,500

3,200

3,200

3,200

3,000

3,800

3,800

3,800

3,800

3,800

3,500

4,500

4,500

4,500

4,500

7,000

7,000

4,800

6,000

6,000

6,000

COLLAPSE PRESSURE BURST PRESSURE JOINT TENSILE YIELD STRENGTH† OPTIMUM MAKE-UP TORQUE

HYDRIL CASING“SUPER F-J” & “SUPER FJ-P”

† JOINT TENSILE STRENGTHS CALCULATED ON: C-75 = 95,000 ULTIMATE, N-80 = 100,000 ULTIMATE & P-110 = 125,000 ULTIMATE

C-75 & L/N-80 P-110

(FT.-LBS)

TADLOCK PIPE

5-22

DIMENSIONAL DATA

HYDRIL CASING“SUPER FJ” & “SUPER FJ-P”

2-3/8 - 4-1/2 CSG. 8 THREADS PER INCH; 5 - 7-3/4 CSG. 6 THREADS PER INCH; 8-5/8 - 13-3/8 CSG. 4 THREADS PER INCH.*ONLY THESE WEIGHTS ARE FJ; ALL OTHER WEIGHTS ARE FJ-P• NOT TO API DRIFT SPECIFICATION

INTERCHANGEABLE WITH HYDRIL FJ*FJ-P “P”-FEATURED CONNECTIONS NOT INTERCHANGEABLE WITH NON-“P” FEATURED CONENECTIONS

} BRACKETED WEIGHTS ARE INTERCHANGEABLE.

CONNECTIONAPI

SIZE

O.D.

(IN.)

7

7-5/8

7-3/4

8-5/8

9-5/8

9-7/8

10-3/4

11-3/4

13-3/8

WEIGHT

T&C

LBS/FT.

23*

26

29

32

35

38

41

46

49.5

26.4

29.7

33.7

39

45.3

52.8

46.1

32

36

40

44

49

52

36

40

43.5

47

53.5

58.4

62.8 )

45.5

51

55.5

60.7

65.7

47

54

60

65

61

68

72

I.D.

(IN.)

6.366

6.276

6.184

6.094

6.004

5.920

5.820

5.660

5.590

6.969

6.875

6.765

6.625

6.435

6.201

6.560

7.921

7.825

7.725

7.625

7.511

7.435

8.921

8.835

8.755

8.681

8.535

8.435

8.625

9.950

9.850

9.760

9.660

9.560

11.000

10.880

10.772

10.682

12.515

12.415

12.347

DRIFT

DIAMETER

(IN.)

6.241

6.151

6.059

5.969

5.879

5.795

5.695

5.535

5.415

6.844

6.750

6.640

6.500

6.310

6.076

6.500•

7.796

7.700

7.600

7.500

7.386

7.310

8.765

8.679

8.599

8.525

8.379

8.279

8.500•

9.794

9.694

9.604

9.504

9.404

10.844

10.724

10.616

10.526

12.359

12.259

12.191

PIN

LENGTH

(IN.)

3.063

3.625

3.688

3.688

3.750

3.750

3.750

3.805

3.805

3.625

3.625

3.688

3.750

3.750

3.820

3.750

3.656

3.656

3.750

3.750

3.750

4.625

3.656

3.688

3.688

3.688

4.125

4.125

4.032

3.688

3.688

3.750

4.188

4.188

4.188

4.156

4.156

4.156

4.188

4.250

4.250

I.D.

(IN.)

6.286

6.196

6.104

6.014

5.924

5.840

5.740

5.660

5.590

6.889

6.795

6.685

6.545

6.355

6.121

---

7.811

7.745

7.645

7.545

7.431

7.355

8.781

8.755

8.675

8.601

8.455

8.355

8.535

9.870

9.770

9.680

9.580

9.480

10.890

10.800

10.692

10.600

12.435

12.305

12.235

O.D.

(IN.)

7-1/8

7-1/8

7-1/8

7-5/32

7-3/16

7-3/16

7.246

7.278

7.175

7-3/4

7-3/4

7-3/4

7-13/16

7-13/16

7.725

7-15/16

8-3/4

8-3/4

8-3/4

8-3/4

8-3/4

8-13/16

9-3/4

9-3/4

9-3/4

9-3/4

9-3/4

9-27/32

10

10-7/8

10-7/8

10-7/8

10-29/32

11

11-15/16

11-15/16

11-15/16

12

13-9/16

13-9/16

13-9/16

TADLOCK PIPE

5-23

PERFORMANCE PROPERTIES

C-75

PSI

3,770

5,250

6,760

8,230

9,710

10,680

11,580

12,980

14,010

3,280

4,670

6,320

8,430

10,790

12,700

10,630

2,950

4,020

5,350

6,680

8,200

9,210

2,320

2,980

3,750

4,630

6,380

7,570

---

2,410

3,100

3,950

5,020

6,080

1,620

2,380

3,070

3,810

1,660

2,220

2,590

P-110

LBS

460

538

626

714

723

822

822

1018

1063

500

613

714

789

977

1127

873

617

724

849

947

1113

1163

691

795

891

982

1145

1312

988

903

1040

1159

1220

1408

882

1095

1324

1455

1195

1439

1605

N-80

LBS

368

430

501

571

579

657

657

815

850

400

490

572

631

781

901

698

493

579

679

757

890

930

553

636

713

785

916

1049

791

722

832

927

976

1127

706

876

1060

1164

956

1151

1284

C-75

LBS

350

408

476

542

550

624

624

774

808

380

466

543

599

742

856

663

469

550

645

719

846

884

525

604

677

746

870

997

751

686

791

881

927

1070

670

832

1007

1106

908

1094

1219

P-110

PSI

8,720

9,950

11,220

12,460

13,700

14,850

16,230

18,430

20,080

8,280

9,470

10,860

12,620

15,020

17,980

14,780

7,860

8,930

10,040

11,160

12,430

13,280

7,040

7,900

8,700

9,440

10,900

11,900

12,180

7,160

8,060

8,860

9,760

10,650

6,140

7,130

8,010

8,750

6,190

6,910

7,400

L/N-80

PSI

6,340

7,240

8,160

9,060

9,960

10,800

11,800

13,400

14,600

6,020

6,890

7,900

9,180

10,920

13,070

10,750

5,710

6,490

7,300

8,120

9,040

9,660

5,120

5,750

6,330

6,870

7,930

8,650

---

5,210

5,860

6,450

7,100

7,750

4,470

5,180

5,830

6,360

4,500

5,020

5,380

C-75

PSI

5,940

6,790

7,650

8,490

9,340

10,130

11,060

12,560

13,690

5,650

6,450

7,400

8,610

10,240

12,260

10,080

5,360

6,090

6,850

7,610

8,480

9,050

4,800

5,390

5,930

6,440

7,430

8,110

---

4,880

5,490

6,040

6,650

7,260

4,190

4,860

5,460

5,960

4,220

4,710

5,040

P-110

PSI

4,450

6,210

8,510

10,760

13,010

15,110

16,980

19,040

20,550

3,930

5,340

7,850

11,060

15,420

18,640

14,980

3,430

4,700

6,380

8,400

10,710

12,260

2,470

3,480

4,430

5,310

7,930

9,750

10,260

2,610

3,670

4,630

5,860

7,490

1,630

2,570

3,610

4,490

1,670

2,330

2,890

L/N-80

PSI

3,830

5,410

7,020

8,600

10,180

11,390

12,350

13,850

14,950

3,400

4,790

6,560

8,810

11,510

13,550

11,340

3,050

4,100

5,520

6,950

8,570

9,650

2,370

3,090

3,810

4,750

6,620

7,890

---

2,480

3,220

4,020

5,160

6,300

1,630

2,450

3,180

3,870

1,670

2,260

2,670

4,500

5,000

5,500

6,500

6,500

6,500

6,500

7,500

7,500

5,000

6,000

6,000

7,000

7,000

---

8,000

6,000

7,000

8,000

8,000

8,000

8,000

8,000

9,000

9,000

10,000

10,000

10,000

10,000

9,000

9,000

12,000

13,000

13,000

10,000

13,000

13,000

13,000

13,000

15,000

15,000

4,500

5,000

5,500

6,500

6,500

6,500

6,500

10,000

10,000

5,000

6,000

6,000

7,000

7,000

12,000

8,000

6,000

7,000

8,000

8,000

8,000

8,000

8,000

9,000

9,000

10,000

10,000

10,000

10,000

9,000

9,000

12,000

13,000

13,000

10,000

13,000

13,000

13,000

13,000

15,000

15,000

COLLAPSE PRESSURE BURST PRESSURE JOINT TENSILE YIELD STRENGTH† OPTIMUM MAKE-UP TORQUE

HYDRIL “SUPER EU” CASING

†JOINT TENSILE STRENGTHS CALCULATED ON: C-75 = 95,000 ULTIMATE, N-80 = 100,000 ULTIMATE, & P-110 = 125,000 ULTIMATE

C-75 & L/N-80 P-110

(FT.-LBS)

TADLOCK PIPE

5-24

DIMENSIONAL DATA

HYDRIL CASING“TRIPLESEAL”

4-1/2 THROUGH 7-3/4 = 6 THREADS PER INCH EXCEPT 7” 41#; 7” 41# & 8-5/8 THROUGH 11-3/4 65# 11-7/8 71.8# = 4 THREADS PER INCH; 11-3/4 - 71# THROUGH 11-3/4 - 83# & 13-3/8 THROUGH 14 = 3 THREADS PER INCH.• NOT TO API DRIFT SPECIFICATION} INTERCHANGEABLE WHERE BRACKETED* THESE WEIGHTS ARE PLAIN END WEIGHTS

CONNECTIONAPI

SIZE

O.D.

(IN.)

4-1/2

5

5-1/2

6-5/8

7

7-5/8

WEIGHT

T&C

LBS/FT.

11.6

12.6

13.5

15.1

18.8

13

15

18

20.3

23.2

14

15.5

17

20

23

26

20

24

28

32

20

23

26

29

32

35

38

41

26.4

29.7

33.7

39

45.3

I.D.

(IN.)

4.000

3.958

3.920

3.826

3.640

4.494

4.408

4.276

4.184

4.044

5.012

4.950

4.892

4.778

4.670

4.548

6.049

5.921

5.791

5.675

6.456

6.366

6.276

6.184

6.094

6.004

5.920

5.820

6.969

6.875

6.765

6.625

6.435

DRIFT

DIAMETER

(IN.)

3.875

3.833

3.795

3.701

3.515

4.369

4.283

4.151

4.059

3.919

4.887

4.825

4.767

4.653

4.545

4.423

5.924

5.796

5.666

5.550

6.331

6.241

6.151

6.059

5.969

5.879

5.795

5.695

6.844

6.750

6.640

6.500

6.310

PIN

LENGTH

(IN.)

3.250

3.250

3.250

3.250

3.250

3.250

3.250

3.250

3.250

3.250

3.250

3.250

3.250

3.250

3.250

3.250

3.813

3.813

3.813

3.813

3.813

3.813

3.813

3.813

3.813

3.813

3.813

4.813

3.813

3.813

3.813

3.813

3.813

I.D.

(IN.)

3.920

3.878

3.840

3.746

3.560

4.414

4.328

4.196

4.104

3.965

4.932

4.870

4.812

4.698

4.590

4.468

5.970

5.840

5.710

5.595

6.376

6.286

6.196

6.104

6.014

5.924

5.840

5.740

6.889

6.795

6.685

6.545

6.355

O.D.

(IN.)

4.719

4.719

4.719

4.750

4.750

5.219

5.219

5.250

5.250

5.250

5.750

5.750

5.781

5.781

5.781

5.781

6.938

6.938

6.969

6.969

7.313

7.313

7.313

7.313

7.344

7.344

7.344

7.360

7.938

7.938

8.000

8.016

8.000

TADLOCK PIPE

5-25

PERFORMANCE PROPERTIES

C-75

PSI

6,130

7,200

8,170

10,390

12,960

4,990

6,970

10,000

11,240

12,970

3,560

4,860

6,070

8,440

10,460

11,860

3,360

5,570

7,830

9,830

2,660

3,770

5,250

6,760

8,230

9,710

10,680

11,580

3,280

4,670

6,320

8,430

10,790

P-110

LBS

273

306

335

405

405

311

387

465

465

465

327

387

444

548

548

548

484

635

780

780

473

586

698

802

842

842

842

1039

672

800

897

971

971

L/N-80

LBS

219

245

268

324

324

249

309

372

372

372

262

310

355

438

438

438

388

508

624

624

378

469

558

642

673

673

673

831

538

640

718

777

777

C-75

LBS

208

233

255

308

308

237

294

353

353

353

249

294

337

416

416

416

368

483

593

593

360

446

531

610

640

640

640

789

511

608

682

738

738

P-110

PSI

10,690

---

12,410

14,420

18,390

9,740

11,400

13,940

15,710

18,400

8,540

9,630

10,640

12,640

14,530

16,660

---

10,230

12,120

13,800

7,480

8,720

9,950

11,220

12,460

13,700

14,850

16,230

8,280

9,470

10,860

12,620

15,020

L/N-80

PSI

7,780

8,440

9,020

10,480

13,380

7,080

8,290

10,140

11,420

13,380

6,210

7,000

7,740

9,190

10,560

12,120

6,090

7,440

8,810

10,040

5,440

6,340

7,240

8,160

9,060

9,960

10,800

11,800

6,020

6,890

7,900

9,180

10,920

C-75

PSI

7,290

7,900

8,460

9,830

12,540

6,640

7,770

9,500

10,710

12,550

5,820

6,560

7,250

8,610

9,900

11,360

5,710

6,970

8,260

9,410

5,100

5,940

6,790

7,650

8,490

9,340

10,130

11,060

5,650

6,450

7,400

8,610

10,240

P-110

PSI

7,560

---

10,670

14,320

19,010

5,830

8,830

13,450

16,490

19,020

4,240

5,620

7,460

11,080

14,520

17,390

---

6,710

10,140

13,210

2,980

4,450

6,210

8,510

10,760

13,010

15,110

16,980

3,930

5,340

7,850

11,060

15,420

L/N-80

PSI

6,350

7,500

8,540

11,080

13,830

5,140

7,250

10,490

11,990

13,830

3,620

4,990

6,280

8,830

11,160

12,650

3,480

5,760

8,170

10,320

2,740

3,830

5,410

7,020

8,600

10,180

11,390

12,350

3,400

4,790

6,560

8,810

11,510

3,200

3,200

3,200

3,200

3,200

3,800

3,800

3,800

3,800

3,800

4,500

4,500

4,500

4,500

4,500

4,500

6,000

6,000

6,000

6,000

6,500

6,500

6,500

6,500

6,500

6,500

6,500

12,000

7,500

7,500

7,500

7,500

7,500

4,200

4,200

4,200

4,200

4,200

5,000

5,000

5,000

5,000

5,000

6,000

6,000

6,000

6,000

6,000

6,000

7,500

7,500

7,500

7,500

8,500

8,500

8,500

8,500

8,500

8,500

8,500

14,000

10,000

10,000

10,000

10,000

10,000

COLLAPSE PRESSURE BURST PRESSURE JOINT TENSILE YIELD STRENGTH† OPTIMUM MAKE-UP TORQUE

HYDRIL CASING“TRIPLESEAL”

† JOINT TENSILE STRENGTHS CALCULATED ON: C-75/L-80 = 95,000 ULTIMATE, N-80 = 100,000 ULTIMATE, & P-110 = 125,000 ULTIMATE

C-75 & L/N-80 P-110

(FT.-LBS)

TADLOCK PIPE

5-26

DIMENSIONAL DATA

HYDRIL CASING“TRIPLESEAL”

4-1/2 THROUGH 7-3/4 = 6 THREADS PER INCH EXCEPT 7” 41#; 7” 41# & 8-5/8 THROUGH 11-3/4 65# 11-7/8 71.8# = 4 THREADS PER INCH; 11-3/4 71# THROUGH 11-3/4-83# & 13-3/8 THROUGH 14 = 3 THREADS PER INCH.7-3/4 INTERCHANGEABLE WITH 7-5/8 WEIGHTS• NOT TO API DRIFT SPECIFICATION} INTERCHANGEABLE WHERE BRACKETED* THESE WEIGHTS ARE PLAIN END WEIGHTS

CONNECTIONAPI

SIZE

O.D.

(IN.)

7-3/4

8-5/8

9-5/8

10-3/4

11-3/4

11-7/8

13-3/8

14

WEIGHT

T&C

LBS/FT.

46.1

32

36

40

44

49

36

40

43.5

47

53.5

40.5

45.5

51

55.5

60.7

65.7

47

54

60

65

71

75

79

83

71.8

68

72

77

85

92

98

92.68*

99.43*

106.13*

112.78*

119.38*

I.D.

(IN.)

6.560

7.921

7.825

7.725

7.625

7.511

8.921

8.835

8.755

8.681

8.535

10.050

9.950

9.850

9.760

9.660

9.560

11.000

10.880

10.772

10.682

10.586

10.514

10.438

10.368

10.711

12.415

12.347

12.275

12.159

12.031

11.937

12.700

12.600

12.500

12.400

12.300

DRIFT

DIAMETER

(IN.)

6.500•

7.796

7.700

7.600

7.500

7.386

8.765

8.679

8.599

8.525

8.379

9.894

9.794

9.694

9.604

9.504

9.404

10.844

10.724

10.616

10.526

10.430

10.358

10.282

10.212

10.625•

12.259

12.191

12.119

12.003

11.875

11.781

12.544

12.444

12.344

12.244

12.144

PIN

LENGTH

(IN.)

3.813

4.250

4.250

4.250

4.250

4.250

4.250

4.250

4.250

4.250

4.250

4.250

4.250

4.250

4.250

4.250

4.250

4.250

4.250

4.250

4.250

5.500

5.500

5.500

5.500

4.250

5.500

5.500

5.500

5.500

5.500

5.500

6.500

6.500

6.500

6.500

6.500

I.D.

(IN.)

---

7.811

7.745

7.645

7.545

7.431

8.781

8.755

8.675

8.601

8.455

9.910

9.870

9.770

9.680

9.580

9.480

10,860

10.800

10.692

10.650

10.474

10.402

10.326

10.256

10.672

12.305

12.235

12.165

12.049

11.921

11.827

12.590

12.490

12.390

12.290

12.190

O.D.

(IN.)

8.125

8.938

8.938

8.938

9.031

9.031

10.000

10.000

10.000

10.000

10.063

11.188

11.188

11.188

11.188

11.250

11.313

12.188

12.188

12.188

12.188

12.250

12.250

12.250

12.250

12.320

13.813

13.813

13.813

13.813

14.000

14.000

14.500

14.500

14.625

14.625

14.625

TADLOCK PIPE

5-27

PERFORMANCE PROPERTIES

C-75

PSI

10,630

2,950

4,020

5,350

6,680

8,200

2,320

2,980

3,750

4,630

6,380

1,720

2,410

3,100

3,950

5,020

6,080

1,620

2,380

3,070

3,810

4,750

5,450

6,190

6,880

---

2,220

2,590

2,990

3,810

4,910

5,720

4,040

4,860

5,670

6,490

7,310

P-110

LBS

1143

758

906

1048

1157

1157

850

1000

1139

1265

1415

947

1143

1338

1511

1683

1855

1147

1405

1635

1800

1592

1720

1858

1982

1805

1675

1840

2014

2290

2596

2800

2576

2824

3070

3315

3557

L/N-80

LBS

915

606

725

839

926

926

680

800

911

1012

1132

758

915

1070

1209

1346

1484

918

1124

1308

1440

1274

1376

1486

1585

1444

1340

1472

1611

1832

2077

2240

2061

2259

2456

2652

2846

C-75

LBS

869

576

689

797

880

880

646

760

865

962

1076

720

869

1017

1148

1279

1410

872

1068

1242

1368

1210

1307

1412

1506

1372

1273

1398

1531

1741

1973

2128

1957

2146

2334

2519

2704

P-110

PSI

14,780

7,860

8,930

10,040

11,160

12,430

7,040

7,900

8,700

9,440

10,900

6,270

7,160

8,060

8,860

9,760

10,650

6,140

7,130

8,010

8,750

9,530

10,120

10,750

11,320

9,430

6,910

7,400

7,920

8,750

9,670

10,350

8,940

9,630

10,310

11,000

11,690

L/N-80

PSI

10,750

5,710

6,490

7,300

8,120

9,040

5,120

5,750

6,330

6,870

7,930

4,560

5,210

5,860

6,450

7,100

7,750

4,470

5,180

5,830

6,360

6,930

7,360

7,820

8,230

---

5,020

5,380

5,760

6,360

7,030

7,530

6,500

7,000

7,500

8,000

8,500

C-75

PSI

10,080

5,360

6,090

6,850

7,610

8,480

4,800

5,390

5,930

6,440

7,430

4,270

4,680

5,490

6,040

6,650

7,260

4,190

4,860

5,460

5,960

6,500

6,900

7,330

7,720

---

4,710

5,040

5,400

5,970

6,590

7,060

6,090

6,560

7,000

7,500

7,970

P-110

PSI

14,980

3,430

4,700

6,380

8,400

10,710

2,470

3,480

4,430

5,310

7,930

1,730

2,610

3,670

4,630

5,860

7,490

1,630

2,570

3,610

4,490

5,450

6,520

7,650

8,700

5,300

2,330

2,890

3,500

4,490

5,700

6,930

4,710

5,620

6,860

8,110

9,360

L/N-80

PSI

11,340

3,050

4,100

5,520

6,950

8,570

2,370

3,090

3,810

4,750

6,620

1,730

2,480

3,220

4,020

5,160

6,300

1,630

2,450

3,180

3,870

4,870

5,630

6,420

7,150

---

2,260

2,670

3,100

3,870

5,050

5,910

4,110

4,990

5,870

6,740

7,620

7,500

9,000

9,000

9,000

9,000

9,000

11,000

11,000

11,000

11,000

11,000

13,000

13,000

13,000

13,000

13,000

13,000

15,000

15,000

15,000

15,000

15,000

18,000

18,000

18,000

15,000

20,000

20,000

20,000

20,000

20,000

20,000

44,000

44,000

44,000

44,000

44,000

10,000

12,000

12,000

12,000

12,000

12,000

15,000

15,000

15,000

15,000

15,000

18,000

18,000

18,000

18,000

18,000

18,000

21,000

21,000

21,000

21,000

21,000

24,000

24,000

24,000

21,000

27,000

27,000

27,000

27,000

27,000

27,000

60,000

60,000

60,000

60,000

60,000

COLLAPSE PRESSURE BURST PRESSURE JOINT TENSILE YIELD STRENGTH† OPTIMUM MAKE-UP TORQUE

HYDRIL “SUPER EU” CASING

† JOINT TENSILE STRENGTHS CALCULATED ON: C-75/L-80 = 95,000 ULTIMATE, N-80 = 100,000 ULTIMATE & P-110 = 125,000 ULTIMATE

C-75 & L/N-80 P-110

(FT.-LBS)

TADLOCK PIPE

5-28

DIMENSIONAL DATA

NL ATLAS BRADFORDFLUSHLINE QUADRASEAL

FL-4S CASING

1-1/8 TAPER PER FOOT6 THREADS PER INCH

CONNECTIONAPI

SIZE

O.D.

(IN.)

5

5-1/2

6-5/8

7

7-5/8

8-5/8

WEIGHT

T&C

LBS/FT.

11.50

13.00

15.00

18.00

20.80

23.60

24.20

14.00

15.50

17.00

20.00

23.00

26.00

28.40

20.00

25.20

24.00

28.00

32.00

17.00

20.00

23.00

26.00

29.00

32.00

35.00

38.00

41.00

24.00

26.40

29.70

33.70

39.00

45.30

24.00

28.00

29.35

32.00

36.00

40.00

44.00

49.00

I.D.

(IN.)

4.560

4.494

4.408

4.276

4.156

4.044

4.000

5.012

4.950

4.892

4.778

4.670

4.548

4.440

6.049

5.965

5.921

5.791

5.675

6.538

6.456

6.366

6.276

6.184

6.094

6.004

5.920

5.820

7.025

6.969

6.875

6.765

6.625

6.435

8.097

8.017

7.981

7.921

7.825

7.725

7.625

7.511

DRIFT

DIAMETER

(IN.)

4.435

4.369

4.283

4.151

4.031

3.919

3.875

4.887

4.825

4.767

4.653

4.545

4.423

4.315

5.924

5.840

5.796

5.666

5.550

6.413

6.331

6.241

6.151

6.059

5.969

5.879

5.795

5.695

6.900

6.844

6.750

6.640

6.500

6.310

7.972

7.892

7.856

7.796

7.700

7.600

7.500

7.386

I.D.

(IN.)

4.460

4.419

4.333

4.201

4.081

3.969

3.925

4.912

4.875

4.817

4.703

4.595

4.473

4.365

5.974

5.895

5.846

5.716

5.600

6.438

6.381

6.291

6.201

6.109

6.019

5.929

5.845

5.745

6.950

6.894

6.800

6.690

6.550

6.360

8.022

7.942

7.906

7.846

7.750

7.650

7.550

7.436

O.D.

(IN.)

5.000

5.500

6.625

7.000

7.625

8.625

PIN

LENGTH

(IN.)

1.682

2.086

2.171

3.845

4.108

4.592

4.719

1.790

2.128

2.181

3.856

4.197

4.602

4.805

2.151

2.246

2.288

4.208

4.570

1.731

2.128

2.213

3.844

4.091

4.433

4.721

4.986

5.301

2.181

2.235

3.931

4.294

4.742

5.325

2.105

2.192

2.224

2.298

4.101

4.411

4.742

5.093

TADLOCK PIPE

5-29

PERFORMANCE PROPERTIES

K/J-55

PSI

3,060

4,140

5,550

7,340

---

---

---

3,120

4,040

4,910

6,610

7,670

---

---

2,970

4,010

4,560

6,170

---

---

2,270

3,270

4,320

---

---

---

---

---

---

2,890

---

---

---

---

1,370

1,880

---

2,530

3,450

---

---

---

P-105

1000

LBS

---

---

301

429

---

552

---

---

---

341

474

539

610

---

---

---

477

661

746

---

---

---

613

687

757

827

890

---

---

---

694

790

909

---

---

---

---

---

---

939

1,037

1,147

N-80

1000

LBS

---

---

241

343

---

441

---

---

---

273

379

431

488

---

---

---

382

529

597

---

---

366

491

549

606

661

712

---

---

414

555

632

727

---

---

---

---

---

672

751

830

918

J-55

1000

LBS

141

197

228

326

---

---

---

172

236

259

360

409

---

---

300

341

362

502

---

---

300

348

466

---

---

---

---

---

---

393

---

---

---

---

362

415

---

478

638

---

---

---

P-105

PSI

---

---

11,400

13,940

---

18,400

---

---

---

10,640

12,640

14,520

16,660

---

---

---

10,230

12,120

13,800

---

---

---

9,960

11,220

12,460

13,700

14,850

---

---

---

9,470

10,860

12,620

---

---

---

---

---

---

10,040

11,160

12,430

N-80

PSI

---

---

8,290

10,140

---

13,380

---

---

---

7,740

9,190

10,560

12,120

---

---

---

7,440

8,810

10,040

---

---

6,340

7,240

8,160

9,060

9,960

10,800

---

---

6,020

6,890

7,900

9,180

---

---

---

---

---

6,490

7,300

8,120

9,040

J-55

PSI

4,240

4,870

5,700

6,970

---

---

---

4,270

4,810

5,320

6,320

7,260

---

---

4,180

4,790

5,110

6,060

---

---

3,740

4,360

4,980

---

---

---

---

---

---

4,140

---

---

---

---

2,950

3,390

---

3,930

4,460

---

---

---

P-105

PSI

---

---

8,830

13,450

---

19,020

---

---

---

7,460

11,080

14,520

17,390

---

---

---

6,710

10,140

13,210

---

---

---

6,210

8,510

10,760

13,010

15,110

---

---

---

5,340

7,850

11,060

---

---

---

---

---

---

6,380

8,400

10,710

E/N-80

PSI

---

---

7,250

10,490

---

13,830

---

---

---

6,280

8,830

11,160

12,650

---

---

---

5,760

8,170

10,320

---

---

3,830

5,410

7,020

8,600

10,180

11,390

---

---

3,400

4,790

6,560

8,810

---

---

---

---

---

4,100

5,520

6,950

8,570

J&K

(FT.-LBS)

3,000

3,000

3,500

3,500

---

4,000

---

3,800

3,800

3,800

4,200

4,200

4,500

---

4,500

4,700

4,700

5,000

---

---

4,000

4,000

5,000

---

---

---

---

---

---

5,000

---

---

---

---

5,000

5,000

---

5,500

5,500

---

---

---

CN&P

(FT.-LBS)

---

---

4,000

4,000

---

4,500

---

---

---

4,500

5,000

5,000

5,300

---

---

---

6,000

6,300

6,500

---

---

5,500

7,000

7,000

7,500

7,500

7,500

---

---

6,500

7,500

7,500

7,500

---

---

---

---

---

7,000

8,000

8,500

8,500

COLLAPSE PRESSURE BURST PRESSUREJOINT

TENSILE YIELD STRENGTH†

OPTIMUM MAKE-UP

TORQUE**

NL ATLAS BRADFORDFLUSHLINE QUADRASEAL

FL-4S CASING

EACH SIZE AND WALL DESIGNED INDIVIDUALLY FOR MAXIMUM PERFORMANCE NOT INTERCHANGEABLE.† JOINT TENSION STRENGTH CALCULATED ON MINIMUM ULTIMATE TENSILE: J-55 = 75,00; K-55, C-75 AND L-80 = 95,000; N-80 AND E = 100,000; C-95 = 105,000;

P-105 = 120,000; P-110 = 125,000 PSI.**OPTIMUM MAKE-UP TORQUE MAY VARY WITH FIELD CONDITIONS. API MODIFIED THREAD COMPOUND IS RECOMMENDED.

TADLOCK PIPE

5-30

DIMENSIONAL DATA

NL ATLAS BRADFORDIJ-4S QUADRASEAL CASING

3/4 TAPER PER FOOT6 THREADS PER INCH

CONNECTION

I.D.

(IN.)

4.494

4.408

4.276

4.156

4.044

4.000

5.012

4.950

4.892

4.778

4.670

4.548

4.440

6.049

5.965

5.921

5.791

5.675

6.456

6.366

6.276

6.184

6.094

8.004

5.920

5.820

5.720

7.025

6.969

6.875

6.765

6.625

6.435

6.560

8.017

7.981

7.921

7.825

7.725

7.625

7.511

9.001

8.921

8.835

8.755

8.681

8.535

8.375

8.125

O.D.

(IN.)

5.390

5.465

5.565

5.565

5.765

5.765

---

6.015

6.015

6.165

6.165

6.340

6.340

7.115

7.215

7.215

7.315

7.415

7.465

7.615

7.615

7.815

7.815

7.815

7.955

7.955

---

8.140

8.140

8.315

8.315

8.465

8.565

---

9.140

9.140

9.265

9.265

9.515

9.515

9.515

10.265

10.265

10.265

10.515

10.515

10.515

---

---

PIN

LENGTH

(IN.)

4.375

4.375

4.375

4.375

4.375

4.375

---

4.375

4.375

4.375

4.375

4.375

4.375

4.438

4.438

4.438

4.438

4.438

4.625

4.625

4.625

4.625

4.625

4.625

4.625

4.625

---

4.813

4.813

4.813

4.813

4.813

4.813

---

4.938

4.938

4.938

4.938

4.938

4.938

4.938

4.938

4.938

4.938

4.938

4.938

4.938

---

---

DRIFT

DIAMETER

(IN.)

4.369

4.283

4.151

4.031

3.919

3.875

4.887

4.825

4.767

4.653

4.545

4.423

4.315

5.924

5.845

5.796

5.666

5.550

6.331

6.241

6.151

6.059

5.969

5.879

5.795

5.695

5.625

6.900

6.844

6.750

6.640

6.500

6.310

6.435

7.892

7.856

7.796

7.700

7.600

7.500

7.386

8.845

8.765

8.679

8.599

8.525

8.379

8.219

7.969

WEIGHT

T&C

LBS/FT.

13.00

15.00

18.00

20.80

23.20

24.20

14.00

15.50

17.00

20.00

23.00

26.00

28.40

20.00

23.20

24.00

28.00

32.00

20.00

23.00

26.00

29.00

32.00

35.00

38.00

41.00

44.00

24.00

26.40

29.70

33.70

39.00

45.30

46.10

28.00

29.35

32.00

36.00

40.00

44.00

49.00

32.30

35.00

40.00

43.50

47.00

53.50

61.10

71.80

API

SIZE

O.D.

(IN.)

5

5-1/2

6-5/8

7

7-5/8

7-3/4

8-5/8

9-5/8

TADLOCK PIPE

5-31

PERFORMANCE PROPERTIES

J-55

PSI

4140

5550

7390

8240

9510

11990

2130

4040

4910

6610

7670

8700

---

2970

4010

4560

6170

7320

2270

3270

4320

5400

6460

7270

7830

8490

---

2040

2890

3910

5090

---

7910

---

1370

---

2530

3450

4400

5350

---

---

2020

2570

3250

3880

---

---

---

P-105

5,000

5,000

6,200

7,200

8,500

8,500

---

6,000

7,100

7,100

7,800

8,700

8,700

7,200

8,200

8,200

9,000

9,500

8,500

8,500

9,500

10,000

11,000

11,000

11,500

11,500

---

9,000

9,000

9,500

11,000

12,000

13,000

---

9,500

10,000

10,000

11,500

12,500

13,500

14,500

10,500

10,500

12,000

13,500

14,500

16,000

---

---

C/N-80

(FT.-LBS)

4,000

4,000

5,000

6,000

7,000

7,000

---

5,000

6,000

6,000

7,000

8,200

8,200

6,000

7,000

7,000

8,000

9,000

7,200

7,200

8,000

9,000

10,000

10,000

10,500

10,500

---

8,000

8,000

8,500

10,000

11,000

12,000

---

8,500

9,000

9,000

10,000

11,000

12,000

13,000

9,500

9,500

10,000

11,000

12,000

14,000

---

---

J-55

3,000

3,000

4,000

5,000

6,000

6,000

---

3,900

5,000

5,000

6,000

7,300

7,300

5,000

6,200

6,200

7,300

8,000

5,500

5,500

7,000

7,500

8,500

8,500

9,000

9,000

---

6,800

6,800

7,300

8,800

9,800

10,200

---

7,300

7,800

7,800

9,000

10,000

10,500

11,000

8,000

8,000

9,000

10,000

11,000

12,500

---

---

P-105

1000#

---

481

580

647

691

---

---

497

546

641

729

826

---

---

---

763

895

1009

---

732

830

929

1025

1119

1205

---

---

---

827

940

1069

1231

1444

---

---

---

1006

1137

1271

1404

1553

---

1128

1260

1381

1493

1639

1639

---

C/N-80

1000#

---

350

422

471

543

---

---

362

397

466

530

601

---

---

---

555

651

734

---

532

604

676

745

814

877

---

---

---

602

633

778

895

1051

---

---

---

732

827

925

1021

1129

---

820

916

1005

1086

1244

1311†

---

J-55

1000#

194

241

290

324

373

---

---

248

273

321

365

413

---

300

341

382

447

504

---

366

415

465

512

559

603

---

---

---

414

469

535

615

723

---

---

---

503

568

636

702

776

---

564

630

691

746

855

928

---

P-105

PSI

9740

11400

13940

15710

18400

23950

---

9630

10640

12640

14530

16660

1855

8370

---

10230

12120

13800

---

8720

9960

11220

12480

13700

14850

16230

---

---

8280

9470

10860

12620

15020

14780

---

---

7860

8930

10040

11160

12430

---

7040

7900

8700

9440

10900

12180

---

C/N-80

PSI

7080

8290

10140

11420

13380

17420

---

7000

7740

9190

10560

12120

1349

6090

---

7440

8810

10040

---

6340

7240

8160

9060

9960

10800

11800

---

---

6020

6890

7890

9180

10920

10750

---

---

5710

6490

7300

8120

9040

---

5120

5750

6330

6870

7930

8860

---

J-55

PSI

4870

5700

6970

7850

9200

11980

4270

4810

5320

6320

7260

8330

---

4180

4790

5110

6060

6900

3740

4360

4980

5610

6230

6850

7420

8110

---

2750

4140

4730

5430

---

7510

---

2950

---

3930

4460

5020

5580

---

---

3520

3950

4350

4720

---

---

---

P-105

PSI

5820

8830

13450

16490

19020

23970

---

5610

7460

11080

14520

17390

19160

4040

---

6710

10140

13200

---

4450

6210

8510

10760

13010

15110

16980

---

---

3930

5340

7850

11060

15420

14980

---

---

3430

4700

6380

8400

10710

---

2470

3480

4430

5310

7930

10260

---

C/N-80

PSI

5140

7250

10490

11990

13830

17430

---

4990

6280

8830

11160

12650

13930

3480

---

5760

8170

10320

---

3830

5410

7020

8600

10180

11390

12350

---

---

3400

4790

6560

8810

11510

11340

---

---

3050

4100

5520

6950

8570

---

2370

3090

3810

4750

6620

8250

---

COLLAPSE PRESSURE BURST PRESSUREPIPE*

TENSILE YIELD STRENGTH*

OPTIMUM MAKE-UP

TORQUE

NL ATLAS BRADFORDIJ-4S QUADRASEAL CASING

NOTE: THE MODIFIED-BUTTRESS RUN-OUT THREAD DESIGN PROVIDES A JOINT WITH TENSILE STRENGTH APPROACHING THAT OF THE BODY OF THE PIPE.

TADLOCK PIPE

5-32

DIMENSIONAL DATA

VALLOUREC VAM CASING

3/4” TAPER PER FOOT6 THREADS PER INCH FOR 4-1/2 CASING5 THREADS PER INCH FOR 5 THROUGH 13-3/8 CASING

COUPLINGAPISIZEO.D.(IN.)

4-1/2

5

5-1/2

6-5/8

7

7-5/8

8-5/8

9-5/8

10-3/4

13-3/8

WEIGHTT&C

(LBS/FT.)10.5011.6013.5015.1016.9018.8021.6024.6013.0015.0018.0021.4024.2015.5017.0020.0023.0026.8020.0024.0028.0032.0023.0026.0029.0032.0035.0038.0041.0044.0026.4029.7033.7035.8039.0042.8028.0032.0036.0040.0044.0049.0056.0036.0040.0043.5047.0053.5059.4040.5045.5051.0055.5060.7065.7054.5061.0068.0072.00

I.D.(IN.)

4.0524.0003.9203.8263.7403.6403.5003.3804.4944.4084.2764.1264.0004.9504.8924.7784.6704.5486.0495.9215.7915.6756.3666.2766.1846.0946.0045.9205.8205.7206.9696.8756.7656.6956.6256.5018.0177.9217.8257.7257.6257.5117.4358.9218.8358.7558.6818.5358.407

10.0509.9509.8509.7609.6609.560

12.61512.51512.41512.347

DRIFTDIAMETER

(IN.)3.9273.8753.7953.7013.6153.5153.3753.2554.3694.2834.1514.0013.8754.8254.7674.6534.5454.4235.9245.7965.6665.5506.2416.1516.0595.9695.8795.7956.6955.5956.8446.7506.6406.5706.5006.3767.8927.7967.7007.6007.5007.3867.3108.7658.6798.5998.5258.3798.2519.8949.7949.6949.6049.5049.404

12.45912.35912.25912.191

PINLENGTH

(IN.)

3.661

4.299

4.378

4.591

4.772

4.984

5.102

5.102

5.118

5.071

LENGTH(IN.)

7.635

9.094

9.252

9.646

10.039

10.433

10.669

10.669

10.669

10.669

SPEC.CL.(IN.)

4.8034.8034.8034.882

------------

5.391

5.891

7.016

7.391

8.141

8.141

10.141

11.266

---

REG.(IN.)

4.8624.8624.9614.9615.1065.1065.6015.280

5.563

6.050

7.390

7.656

8.504

9.625

10.625

11.748

14.375

O.D.

TADLOCK PIPE

5-33

PERFORMANCE PROPERTIES

OPTIMUM MAKEUP TORQUE(FT.-LBS)

43004700580065008000---------

5100650080008700

108005800650080009000---

80008000870094008000870094009400

101001080010800123008000870094009400

1010010100800087009400

1080011600123001230087009400

101001160013000137008700

101001160012300134001410010800116001230013000

K-55PSI

401049606420762085009510108601199041405550739087709900404049106610767087002970456061707320327043205400646072707830849091402890391050905850------

18802530345044005350------

2020257032503880------

1580209027003390------

113015401950---

P-1101000#331367422485541605691762415481580

672†672†497546641

726†726†63176389510107328309291025

1098†1098†1098†1098†

827940106911511231

1402†874100611371271140415531651112812601381149317101897

1251†1423†1594†1745†1912†2077†1659†1870†2079†2221†

N/L-801000#241267307353393440503555302350422501565361397466530

581†459555651734532604676745814877

879†879†6026837788378959986367328279251021112912018209161005108612441380915104011651276139815191241139915561661

K-551000#

166184211241271302346381208241290345389248273321365413315382447505366415465512559603653703414470535757------437503568636702------564630691746------629715801877------853962

1069---

P-110PSI

9580106901241014420162601839021390239509740114001394016820192509630106401264014530166608370102301212013800872099601122012480137001485016230176008280947010860117401262014190678078608930100401116012430132807040790087009440109001218062707160806088609760106505470619069107400

N/L-80PSI

697077809020

104801182013380155601742070808290

101401224014000700077409190

1056012120609074408810

1004063407240816090609960

10800118001280060206890789085409180

1032049305710649073008120904096605120575063306870793088604580521058606450710077503980450050205380

K-55PSI

479053506200721081309200

106901198048705700697084109630481053206320726083304180511060606900436049805610623068507420811088004140473054305870------

33903930446050205580------

3520395043504720------

3130358040304430------

273030903450---

P-110PSI

55407560106701432017010190102173023970582088301345017550198005610746011080145201739040406710101401320044506210851010760130101511016980182803930534078509460110601391022103430470063808400107101226024703480443053107930102601730261036704630586074901140167023302890

N/L-80PSI

493063508540110801237013830158001743051407250104901276014400499062808830111601265034805760817010320383054107020860010180113901235013290340047906560769088101081021603050410055206950857096502370309038104750662082501730248032204020516063001140167022602670

COLLAPSE PRESSURE BURST PRESSURE PIPE YIELD STRENGTH*

VALLOUREC VAM CASING

*JOINT EFFICIENCY 100% OR MORE EXCEPT AS NOTED BELOW.†JOINT STRENGTH IS SHOWN AND IS LESS THAN THE PIPE YIELD STRENGTH.

TADLOCK PIPE

NOTES

TADLOCK PIPE